pca10040.h 7.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206
  1. /**
  2. * Copyright (c) 2014 - 2020, Nordic Semiconductor ASA
  3. *
  4. * All rights reserved.
  5. *
  6. * Redistribution and use in source and binary forms, with or without modification,
  7. * are permitted provided that the following conditions are met:
  8. *
  9. * 1. Redistributions of source code must retain the above copyright notice, this
  10. * list of conditions and the following disclaimer.
  11. *
  12. * 2. Redistributions in binary form, except as embedded into a Nordic
  13. * Semiconductor ASA integrated circuit in a product or a software update for
  14. * such product, must reproduce the above copyright notice, this list of
  15. * conditions and the following disclaimer in the documentation and/or other
  16. * materials provided with the distribution.
  17. *
  18. * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
  19. * contributors may be used to endorse or promote products derived from this
  20. * software without specific prior written permission.
  21. *
  22. * 4. This software, with or without modification, must only be used with a
  23. * Nordic Semiconductor ASA integrated circuit.
  24. *
  25. * 5. Any software provided in binary form under this license must not be reverse
  26. * engineered, decompiled, modified and/or disassembled.
  27. *
  28. * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
  29. * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  30. * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
  31. * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
  32. * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  33. * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
  34. * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  35. * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  36. * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
  37. * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  38. *
  39. */
  40. #ifndef PCA10040_H
  41. #define PCA10040_H
  42. #ifdef __cplusplus
  43. extern "C" {
  44. #endif
  45. #include "nrf_gpio.h"
  46. // LEDs definitions for PCA10040
  47. #define LEDS_NUMBER 4
  48. #if 0
  49. #define LED_START 17
  50. #define LED_1 17
  51. #define LED_2 18
  52. #define LED_3 19
  53. #define LED_4 20
  54. #define LED_STOP 20
  55. #endif
  56. #if 1
  57. #define LED_START 15
  58. #define LED_1 15
  59. #define LED_2 16
  60. #define LED_3 17
  61. #define LED_4 18
  62. #define LED_STOP 18
  63. #endif
  64. #define LEDS_ACTIVE_STATE 1
  65. #define LEDS_INV_MASK LEDS_MASK
  66. #define LEDS_LIST { LED_1, LED_2, LED_3, LED_4 }
  67. #define BSP_LED_0 LED_1
  68. #define BSP_LED_1 LED_2
  69. #define BSP_LED_2 LED_3
  70. #define BSP_LED_3 LED_4
  71. #define BUTTONS_NUMBER 4
  72. #if 0
  73. #define BUTTON_START 13
  74. #define BUTTON_1 13
  75. #define BUTTON_2 14
  76. #define BUTTON_3 15
  77. #define BUTTON_4 16
  78. #define BUTTON_STOP 16
  79. #define BUTTON_PULL NRF_GPIO_PIN_PULLUP
  80. #endif
  81. #if 1
  82. #define BUTTON_START 11
  83. #define BUTTON_1 11
  84. #define BUTTON_2 12
  85. #define BUTTON_3 13
  86. #define BUTTON_4 14
  87. #define BUTTON_STOP 14
  88. #define BUTTON_PULL NRF_GPIO_PIN_PULLUP
  89. #endif
  90. #define BUTTONS_ACTIVE_STATE 0
  91. #define BUTTONS_LIST { BUTTON_1, BUTTON_2, BUTTON_3, BUTTON_4 }
  92. #define BSP_BUTTON_0 BUTTON_1
  93. #define BSP_BUTTON_1 BUTTON_2
  94. #define BSP_BUTTON_2 BUTTON_3
  95. #define BSP_BUTTON_3 BUTTON_4
  96. #define RX_PIN_NUMBER 8
  97. #define TX_PIN_NUMBER 6
  98. #define CTS_PIN_NUMBER 7
  99. #define RTS_PIN_NUMBER 5
  100. #define HWFC true
  101. #define SPIS_MISO_PIN 28 // SPI MISO signal.
  102. #define SPIS_CSN_PIN 12 // SPI CSN signal.
  103. #define SPIS_MOSI_PIN 25 // SPI MOSI signal.
  104. #define SPIS_SCK_PIN 29 // SPI SCK signal.
  105. #define SPIM0_SCK_PIN 29 // SPI clock GPIO pin number.
  106. #define SPIM0_MOSI_PIN 25 // SPI Master Out Slave In GPIO pin number.
  107. #define SPIM0_MISO_PIN 28 // SPI Master In Slave Out GPIO pin number.
  108. #define SPIM0_SS_PIN 12 // SPI Slave Select GPIO pin number.
  109. #define SPIM1_SCK_PIN 2 // SPI clock GPIO pin number.
  110. #define SPIM1_MOSI_PIN 3 // SPI Master Out Slave In GPIO pin number.
  111. #define SPIM1_MISO_PIN 4 // SPI Master In Slave Out GPIO pin number.
  112. #define SPIM1_SS_PIN 5 // SPI Slave Select GPIO pin number.
  113. #define SPIM2_SCK_PIN 12 // SPI clock GPIO pin number.
  114. #define SPIM2_MOSI_PIN 13 // SPI Master Out Slave In GPIO pin number.
  115. #define SPIM2_MISO_PIN 14 // SPI Master In Slave Out GPIO pin number.
  116. #define SPIM2_SS_PIN 15 // SPI Slave Select GPIO pin number.
  117. // serialization APPLICATION board - temp. setup for running serialized MEMU tests
  118. #define SER_APP_RX_PIN 23 // UART RX pin number.
  119. #define SER_APP_TX_PIN 24 // UART TX pin number.
  120. #define SER_APP_CTS_PIN 2 // UART Clear To Send pin number.
  121. #define SER_APP_RTS_PIN 25 // UART Request To Send pin number.
  122. #define SER_APP_SPIM0_SCK_PIN 27 // SPI clock GPIO pin number.
  123. #define SER_APP_SPIM0_MOSI_PIN 2 // SPI Master Out Slave In GPIO pin number
  124. #define SER_APP_SPIM0_MISO_PIN 26 // SPI Master In Slave Out GPIO pin number
  125. #define SER_APP_SPIM0_SS_PIN 23 // SPI Slave Select GPIO pin number
  126. #define SER_APP_SPIM0_RDY_PIN 25 // SPI READY GPIO pin number
  127. #define SER_APP_SPIM0_REQ_PIN 24 // SPI REQUEST GPIO pin number
  128. // serialization CONNECTIVITY board
  129. #define SER_CON_RX_PIN 24 // UART RX pin number.
  130. #define SER_CON_TX_PIN 23 // UART TX pin number.
  131. #define SER_CON_CTS_PIN 25 // UART Clear To Send pin number. Not used if HWFC is set to false.
  132. #define SER_CON_RTS_PIN 2 // UART Request To Send pin number. Not used if HWFC is set to false.
  133. #define SER_CON_SPIS_SCK_PIN 27 // SPI SCK signal.
  134. #define SER_CON_SPIS_MOSI_PIN 2 // SPI MOSI signal.
  135. #define SER_CON_SPIS_MISO_PIN 26 // SPI MISO signal.
  136. #define SER_CON_SPIS_CSN_PIN 23 // SPI CSN signal.
  137. #define SER_CON_SPIS_RDY_PIN 25 // SPI READY GPIO pin number.
  138. #define SER_CON_SPIS_REQ_PIN 24 // SPI REQUEST GPIO pin number.
  139. #define SER_CONN_CHIP_RESET_PIN 11 // Pin used to reset connectivity chip
  140. // Arduino board mappings
  141. #define ARDUINO_SCL_PIN 27 // SCL signal pin
  142. #define ARDUINO_SDA_PIN 26 // SDA signal pin
  143. #define ARDUINO_AREF_PIN 2 // Aref pin
  144. #define ARDUINO_13_PIN 25 // Digital pin 13
  145. #define ARDUINO_12_PIN 24 // Digital pin 12
  146. #define ARDUINO_11_PIN 23 // Digital pin 11
  147. #define ARDUINO_10_PIN 22 // Digital pin 10
  148. #define ARDUINO_9_PIN 20 // Digital pin 9
  149. #define ARDUINO_8_PIN 19 // Digital pin 8
  150. #define ARDUINO_7_PIN 18 // Digital pin 7
  151. #define ARDUINO_6_PIN 17 // Digital pin 6
  152. #define ARDUINO_5_PIN 16 // Digital pin 5
  153. #define ARDUINO_4_PIN 15 // Digital pin 4
  154. #define ARDUINO_3_PIN 14 // Digital pin 3
  155. #define ARDUINO_2_PIN 13 // Digital pin 2
  156. #define ARDUINO_1_PIN 12 // Digital pin 1
  157. #define ARDUINO_0_PIN 11 // Digital pin 0
  158. #define ARDUINO_A0_PIN 3 // Analog channel 0
  159. #define ARDUINO_A1_PIN 4 // Analog channel 1
  160. #define ARDUINO_A2_PIN 28 // Analog channel 2
  161. #define ARDUINO_A3_PIN 29 // Analog channel 3
  162. #define ARDUINO_A4_PIN 30 // Analog channel 4
  163. #define ARDUINO_A5_PIN 31 // Analog channel 5
  164. #ifdef __cplusplus
  165. }
  166. #endif
  167. #endif // PCA10040_H