main(7469).c 46 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528152915301531153215331534153515361537153815391540154115421543154415451546154715481549155015511552155315541555155615571558155915601561156215631564156515661567156815691570157115721573157415751576157715781579158015811582158315841585158615871588158915901591159215931594159515961597159815991600160116021603160416051606160716081609161016111612161316141615161616171618161916201621162216231624162516261627162816291630163116321633163416351636163716381639164016411642164316441645164616471648164916501651165216531654165516561657165816591660166116621663166416651666166716681669167016711672167316741675167616771678167916801681168216831684168516861687168816891690169116921693169416951696169716981699170017011702170317041705170617071708170917101711171217131714
  1. /**
  2. * Copyright (c) 2016 - 2020, Nordic Semiconductor ASA
  3. *
  4. * All rights reserved.
  5. *
  6. * Redistribution and use in source and binary forms, with or without modification,
  7. * are permitted provided that the following conditions are met:
  8. *
  9. * 1. Redistributions of source code must retain the above copyright notice, this
  10. * list of conditions and the following disclaimer.
  11. *
  12. * 2. Redistributions in binary form, except as embedded into a Nordic
  13. * Semiconductor ASA integrated circuit in a product or a software update for
  14. * such product, must reproduce the above copyright notice, this list of
  15. * conditions and the following disclaimer in the documentation and/or other
  16. * materials provided with the distribution.
  17. *
  18. * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
  19. * contributors may be used to endorse or promote products derived from this
  20. * software without specific prior written permission.
  21. *
  22. * 4. This software, with or without modification, must only be used with a
  23. * Nordic Semiconductor ASA integrated circuit.
  24. *
  25. * 5. Any software provided in binary form under this license must not be reverse
  26. * engineered, decompiled, modified and/or disassembled.
  27. *
  28. * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
  29. * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  30. * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
  31. * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
  32. * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  33. * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
  34. * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  35. * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  36. * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
  37. * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  38. *
  39. */
  40. /*************************************************************************************
  41. 2022/01/26
  42. 업데이트 후 바뀐 버전정보 확인을 위해 부팅시 서버에 버전정보 전달
  43. 2022/03/09
  44. 비상벨 프로토콜 확인
  45. 안드로이드 원패스 필터 수정
  46. *************************************************************************************/
  47. #include <stdio.h>
  48. #include <stdint.h>
  49. #include <stdbool.h>
  50. #include "nordic_common.h"
  51. #include "app_error.h"
  52. #include "app_uart.h"
  53. #include "ble_db_discovery.h"
  54. #include "app_timer.h"
  55. #include "app_util.h"
  56. #include "bsp_btn_ble.h"
  57. #include "ble.h"
  58. #include "ble_gap.h"
  59. #include "ble_hci.h"
  60. #include "nrf_sdh.h"
  61. #include "nrf_sdh_ble.h"
  62. #include "nrf_sdh_soc.h"
  63. #include "ble_nus_c.h"
  64. #include "nrf_ble_gatt.h"
  65. #include "nrf_pwr_mgmt.h"
  66. #include "nrf_ble_scan.h"
  67. #include "peer_manager.h"
  68. #include "nrf_log.h"
  69. #include "nrf_log_ctrl.h"
  70. #include "nrf_log_default_backends.h"
  71. #include "our_service.h"
  72. #include "board_gpi.h"
  73. #include "nrf_spi.h"
  74. #include "nrf_drv_spi.h"
  75. #include "app_util_platform.h"
  76. #include "nrf_gpio.h"
  77. #include "nrf_delay.h"
  78. #include "boards.h"
  79. #include "app_error.h"
  80. #include <string.h>
  81. #include "main.h"
  82. #include "sysmgr.h"
  83. #define APP_BLE_CONN_CFG_TAG 1 /**< Tag that refers to the BLE stack configuration set with @ref sd_ble_cfg_set. The default tag is @ref BLE_CONN_CFG_TAG_DEFAULT. */
  84. #define APP_BLE_OBSERVER_PRIO 3 /**< BLE observer priority of the application. There is no need to modify this value. */
  85. #define UART_TX_BUF_SIZE 256 /**< UART TX buffer size. */
  86. #define UART_RX_BUF_SIZE 256 /**< UART RX buffer size. */
  87. #define NUS_SERVICE_UUID_TYPE BLE_UUID_TYPE_VENDOR_BEGIN /**< UUID type for the Nordic UART Service (vendor specific). */
  88. #define ECHOBACK_BLE_UART_DATA 1 /**< Echo the UART data that is received over the Nordic UART Service (NUS) back to the sender. */
  89. BLE_NUS_C_DEF(m_ble_nus_c); /**< BLE Nordic UART Service (NUS) client instance. */
  90. NRF_BLE_GATT_DEF(m_gatt); /**< GATT module instance. */
  91. BLE_DB_DISCOVERY_DEF(m_db_disc); /**< Database discovery module instance. */
  92. NRF_BLE_SCAN_DEF(m_scan); /**< Scanning Module instance. */
  93. NRF_BLE_GQ_DEF(m_ble_gatt_queue, /**< BLE GATT Queue instance. */
  94. NRF_SDH_BLE_CENTRAL_LINK_COUNT,
  95. NRF_BLE_GQ_QUEUE_SIZE);
  96. #define SPI_INSTANCE 0 /**< SPI instance index. */
  97. //const nrf_drv_spi_t spi = NRF_DRV_SPI_INSTANCE(SPI_INSTANCE); /**< SPI instance. */
  98. //const nrf_drv_spi_t spi = { 0, { .spi = spi0 }, false }; /**< SPI instance. */
  99. volatile bool spi_xfer_done; /**< Flag used to indicate that SPI instance completed the transfer. */
  100. APP_TIMER_DEF(m_our_char_timer_id);
  101. #define OUR_CHAR_TIMER_INTERVAL APP_TIMER_TICKS(1) // 1 ms intervals
  102. static uint16_t m_ble_nus_max_data_len = BLE_GATT_ATT_MTU_DEFAULT - OPCODE_LENGTH - HANDLE_LENGTH; /**< Maximum length of data (in bytes) that can be transmitted to the peer by the Nordic UART service module. */
  103. static uint16_t m_conn_handle = BLE_CONN_HANDLE_INVALID;
  104. unsigned int gTimeCounter = 0;
  105. /**@brief NUS UUID. */
  106. static ble_uuid_t const m_nus_uuid =
  107. {
  108. .uuid = BLE_UUID_NUS_SERVICE,
  109. .type = NUS_SERVICE_UUID_TYPE
  110. };
  111. //static char my_addr[6] = {0xE9, 0xB1, 0x8D, 0xA2, 0xED, 0x07}; C
  112. static char my_addr[6] = {0x65, 0x7C, 0x2C, 0x69, 0xC1, 0xDB}; //P
  113. //static char my_addr_1[6] = {0x26, 0xAA, 0xEE, 0x75, 0x90, 0xCC}; //SAMPLE
  114. //static char my_addr[6] = {0x65, 0x7C, 0x2C, 0x69, 0xC1, 0xDD}; //P TEST Bad-Mac
  115. static char my_addr_1[6] = {0x26, 0xAA, 0xEE, 0x75, 0x90, 0xCd}; //SAMPLE bad-mac
  116. extern char ScanHSBuff[];
  117. extern uint8_t m_tx_buf[]; /**< TX buffer. */
  118. extern uint8_t m_rx_buf[]; /**< RX buffer. */
  119. extern uint8_t m_length; /**< Transfer length. */
  120. /* Flag to check fds initialization. */
  121. static bool volatile m_fds_initialized;
  122. /* Array to map FDS events to strings. */
  123. static char const * fds_evt_str[] =
  124. {
  125. "FDS_EVT_INIT",
  126. "FDS_EVT_WRITE",
  127. "FDS_EVT_UPDATE",
  128. "FDS_EVT_DEL_RECORD",
  129. "FDS_EVT_DEL_FILE",
  130. "FDS_EVT_GC",
  131. };
  132. /* Keep track of the progress of a delete_all operation. */
  133. static struct
  134. {
  135. bool delete_next; //!< Delete next record.
  136. bool pending; //!< Waiting for an fds FDS_EVT_DEL_RECORD event, to delete the next record.
  137. } m_delete_all;
  138. ble_gap_addr_t old_ble_addr;
  139. ble_gap_addr_t new_ble_addr;
  140. static void fds_evt_handler(fds_evt_t const * p_evt)
  141. {
  142. if (p_evt->result == NRF_SUCCESS)
  143. {
  144. NRF_LOG_INFO("Event: %s received (NRF_SUCCESS)",
  145. fds_evt_str[p_evt->id]);
  146. }
  147. else
  148. {
  149. NRF_LOG_INFO("Event: %s received (%s)",
  150. fds_evt_str[p_evt->id],
  151. fds_err_str(p_evt->result));
  152. }
  153. switch (p_evt->id)
  154. {
  155. case FDS_EVT_INIT:
  156. if (p_evt->result == NRF_SUCCESS)
  157. {
  158. m_fds_initialized = true;
  159. }
  160. break;
  161. case FDS_EVT_WRITE:
  162. {
  163. if (p_evt->result == NRF_SUCCESS)
  164. {
  165. NRF_LOG_INFO("Record ID:\t0x%04x", p_evt->write.record_id);
  166. NRF_LOG_INFO("File ID:\t0x%04x", p_evt->write.file_id);
  167. NRF_LOG_INFO("Record key:\t0x%04x", p_evt->write.record_key);
  168. }
  169. } break;
  170. case FDS_EVT_DEL_RECORD:
  171. {
  172. if (p_evt->result == NRF_SUCCESS)
  173. {
  174. NRF_LOG_INFO("Record ID:\t0x%04x", p_evt->del.record_id);
  175. NRF_LOG_INFO("File ID:\t0x%04x", p_evt->del.file_id);
  176. NRF_LOG_INFO("Record key:\t0x%04x", p_evt->del.record_key);
  177. }
  178. m_delete_all.pending = false;
  179. } break;
  180. default:
  181. break;
  182. }
  183. }
  184. /**@brief Begin deleting all records, one by one. */
  185. void delete_all_begin(void)
  186. {
  187. m_delete_all.delete_next = true;
  188. }
  189. /**@brief Process a delete all command.
  190. *
  191. * Delete records, one by one, until no records are left.
  192. */
  193. void delete_all_process(void)
  194. {
  195. if (m_delete_all.delete_next & !m_delete_all.pending)
  196. {
  197. NRF_LOG_INFO("Deleting next record.");
  198. m_delete_all.delete_next = record_delete_next();
  199. if (!m_delete_all.delete_next)
  200. {
  201. NRF_LOG_INFO("No records left to delete.");
  202. }
  203. }
  204. }
  205. /**
  206. * @brief SPI user event handler.
  207. * @param event
  208. */
  209. void spi_event_handler(nrf_drv_spi_evt_t const * p_event,
  210. void * p_context)
  211. {
  212. spi_xfer_done = true;
  213. NRF_LOG_INFO("Transfer completed.");
  214. if (m_rx_buf[0] != 0)
  215. {
  216. NRF_LOG_INFO(" Received:");
  217. NRF_LOG_HEXDUMP_INFO(m_rx_buf, strlen((const char *)m_rx_buf));
  218. }
  219. }
  220. // 1ms tick (1ms interrupt)
  221. // ALREADY_DONE_FOR_YOU: This is a timer event handler
  222. static void timer_timeout_handler(void * p_context)
  223. {
  224. // Step 3.F, Update temperature and characteristic value.
  225. static int32_t sensor_value = 0;
  226. // sd_temp_get(&sensor_value); // *modify where sensor measurement function goes
  227. // our_sensor_characteristic_update(&m_our_service, &sensor_value); // make a call to characteristic update function
  228. // nrf_gpio_pin_toggle(LED_4);
  229. //printf("%d\r\n", sensor_value++);
  230. //SendData();
  231. gTimeCounter++;
  232. SystemTimer.MS_1++;
  233. SystemTimer.UART_LAST_RECV_TIMER++;
  234. SystemTimer.SEND_TEST_TIMER++;
  235. SystemTimer.LED_TOGGLE_TIMER++;
  236. SystemTimer.TMR_CON_START++;
  237. SystemTimer.PARK_KEEP_TIMER++;
  238. SystemTimer.DEV_REG_TIMER++;
  239. SystemTimer.SVR_SEND_TIMER++;
  240. SystemManager.LedBlinkTimer--;
  241. if(!(SystemTimer.MS_1 % 10)){
  242. SystemTimer.MS_10_TICK = 1;
  243. }
  244. if(!(SystemTimer.MS_1 % 100)){
  245. SystemTimer.MS_100_TICK = 1;
  246. }
  247. if(!(SystemTimer.MS_1 % 1000)){
  248. SystemTimer.MS_1000_TICK = 1;
  249. }
  250. if( SystemTimer.TMR_CON_START == 10000 )
  251. {
  252. sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_LOCAL_HOST_TERMINATED_CONNECTION);
  253. }
  254. }
  255. /**@brief Function for starting timers.
  256. */
  257. static void application_timers_start(void)
  258. {
  259. /* YOUR_JOB: Start your timers. below is an example of how to start a timer.
  260. ret_code_t err_code;
  261. err_code = app_timer_start(m_app_timer_id, TIMER_INTERVAL, NULL);
  262. APP_ERROR_CHECK(err_code); */
  263. app_timer_start(m_our_char_timer_id, OUR_CHAR_TIMER_INTERVAL, NULL);
  264. }
  265. /**@brief Function for handling asserts in the SoftDevice.
  266. *
  267. * @details This function is called in case of an assert in the SoftDevice.
  268. *
  269. * @warning This handler is only an example and is not meant for the final product. You need to analyze
  270. * how your product is supposed to react in case of assert.
  271. * @warning On assert from the SoftDevice, the system can only recover on reset.
  272. *
  273. * @param[in] line_num Line number of the failing assert call.
  274. * @param[in] p_file_name File name of the failing assert call.
  275. */
  276. void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name)
  277. {
  278. app_error_handler(0xDEADBEEF, line_num, p_file_name);
  279. }
  280. /**@brief Function for handling the Nordic UART Service Client errors.
  281. *
  282. * @param[in] nrf_error Error code containing information about what went wrong.
  283. */
  284. static void nus_error_handler(uint32_t nrf_error)
  285. {
  286. APP_ERROR_HANDLER(nrf_error);
  287. }
  288. /**@brief Function to start scanning. */
  289. static void scan_start(void)
  290. {
  291. ret_code_t ret;
  292. ret = nrf_ble_scan_start(&m_scan);
  293. APP_ERROR_CHECK(ret);
  294. ret = bsp_indication_set(BSP_INDICATE_SCANNING);
  295. APP_ERROR_CHECK(ret);
  296. }
  297. /**@brief Function for handling Scanning Module events.
  298. */
  299. static void scan_evt_handler(scan_evt_t const * p_scan_evt)
  300. {
  301. ret_code_t err_code;
  302. switch(p_scan_evt->scan_evt_id)
  303. {
  304. case NRF_BLE_SCAN_EVT_CONNECTING_ERROR:
  305. {
  306. err_code = p_scan_evt->params.connecting_err.err_code;
  307. APP_ERROR_CHECK(err_code);
  308. } break;
  309. case NRF_BLE_SCAN_EVT_CONNECTED:
  310. {
  311. ble_gap_evt_connected_t const * p_connected =
  312. p_scan_evt->params.connected.p_connected;
  313. // Scan is automatically stopped by the connection.
  314. NRF_LOG_INFO("Connecting to target %02x%02x%02x%02x%02x%02x",
  315. p_connected->peer_addr.addr[0],
  316. p_connected->peer_addr.addr[1],
  317. p_connected->peer_addr.addr[2],
  318. p_connected->peer_addr.addr[3],
  319. p_connected->peer_addr.addr[4],
  320. p_connected->peer_addr.addr[5]
  321. );
  322. } break;
  323. case NRF_BLE_SCAN_EVT_SCAN_TIMEOUT:
  324. {
  325. NRF_LOG_INFO("Scan timed out.");
  326. scan_start();
  327. } break;
  328. default:
  329. break;
  330. }
  331. }
  332. /**@brief Function for initializing the scanning and setting the filters.
  333. */
  334. static void scan_init(void)
  335. {
  336. ret_code_t err_code;
  337. nrf_ble_scan_init_t init_scan;
  338. memset(&init_scan, 0, sizeof(init_scan));
  339. init_scan.connect_if_match = true;
  340. init_scan.conn_cfg_tag = APP_BLE_CONN_CFG_TAG;
  341. err_code = nrf_ble_scan_init(&m_scan, &init_scan, scan_evt_handler);
  342. APP_ERROR_CHECK(err_code);
  343. #if 0
  344. err_code = nrf_ble_scan_filter_set(&m_scan, SCAN_ADDR_FILTER, my_addr);
  345. APP_ERROR_CHECK(err_code);
  346. err_code = nrf_ble_scan_filter_set(&m_scan, SCAN_ADDR_FILTER, my_addr_1);
  347. APP_ERROR_CHECK(err_code);
  348. err_code = nrf_ble_scan_filters_enable(&m_scan, NRF_BLE_SCAN_ADDR_FILTER, false);
  349. APP_ERROR_CHECK(err_code);
  350. #endif
  351. #if 1
  352. err_code = nrf_ble_scan_filter_set(&m_scan, SCAN_UUID_FILTER, &m_nus_uuid);
  353. APP_ERROR_CHECK(err_code);
  354. err_code = nrf_ble_scan_filters_enable(&m_scan, NRF_BLE_SCAN_UUID_FILTER, false);
  355. APP_ERROR_CHECK(err_code);
  356. #endif
  357. }
  358. /**@brief Function for handling database discovery events.
  359. *
  360. * @details This function is a callback function to handle events from the database discovery module.
  361. * Depending on the UUIDs that are discovered, this function forwards the events
  362. * to their respective services.
  363. *
  364. * @param[in] p_event Pointer to the database discovery event.
  365. */
  366. static void db_disc_handler(ble_db_discovery_evt_t * p_evt)
  367. {
  368. ble_nus_c_on_db_disc_evt(&m_ble_nus_c, p_evt);
  369. }
  370. /**@brief Function for handling characters received by the Nordic UART Service (NUS).
  371. *
  372. * @details This function takes a list of characters of length data_len and prints the characters out on UART.
  373. * If @ref ECHOBACK_BLE_UART_DATA is set, the data is sent back to sender.
  374. */
  375. static void ble_nus_chars_received_uart_print(uint8_t * p_data, uint16_t data_len)
  376. {
  377. ret_code_t ret_val;
  378. NRF_LOG_DEBUG("Receiving data.");
  379. NRF_LOG_INFO("Receiving data.");
  380. NRF_LOG_RAW_INFO("Receiving data.");
  381. NRF_LOG_HEXDUMP_DEBUG(p_data, data_len);
  382. for (uint32_t i = 0; i < data_len; i++)
  383. {
  384. do
  385. {
  386. ret_val = app_uart_put(p_data[i]);
  387. if ((ret_val != NRF_SUCCESS) && (ret_val != NRF_ERROR_BUSY))
  388. {
  389. NRF_LOG_ERROR("app_uart_put failed for index 0x%04x.", i);
  390. APP_ERROR_CHECK(ret_val);
  391. }
  392. } while (ret_val == NRF_ERROR_BUSY);
  393. }
  394. if (p_data[data_len-1] == '\r')
  395. {
  396. while (app_uart_put('\n') == NRF_ERROR_BUSY);
  397. }
  398. if (ECHOBACK_BLE_UART_DATA)
  399. {
  400. // Send data back to the peripheral.
  401. do
  402. {
  403. ret_val = ble_nus_c_string_send(&m_ble_nus_c, p_data, data_len);
  404. if ((ret_val != NRF_SUCCESS) && (ret_val != NRF_ERROR_BUSY))
  405. {
  406. NRF_LOG_ERROR("Failed sending NUS message. Error 0x%x. ", ret_val);
  407. APP_ERROR_CHECK(ret_val);
  408. }
  409. } while (ret_val == NRF_ERROR_BUSY);
  410. }
  411. }
  412. void uart_event_handle(app_uart_evt_t * p_event)
  413. {
  414. static uint8_t data_array[BLE_NUS_MAX_DATA_LEN];
  415. static uint16_t index = 0;
  416. uint32_t ret_val;
  417. switch (p_event->evt_type)
  418. {
  419. /**@snippet [Handling data from UART] */
  420. case APP_UART_DATA_READY:
  421. // SystemTimer.UART1_LAST_RECV_TIMER = 0;
  422. USART_Handler();
  423. break;
  424. case APP_UART_DATA:
  425. NRF_LOG_INFO("APP_UART_DATA");
  426. break;
  427. /**@snippet [Handling data from UART] */
  428. case APP_UART_COMMUNICATION_ERROR:
  429. NRF_LOG_ERROR("Communication error occurred while handling UART.");
  430. APP_ERROR_HANDLER(p_event->data.error_communication);
  431. break;
  432. case APP_UART_FIFO_ERROR:
  433. NRF_LOG_ERROR("Error occurred in FIFO module used by UART.");
  434. APP_ERROR_HANDLER(p_event->data.error_code);
  435. break;
  436. default:
  437. break;
  438. }
  439. }
  440. /**@brief Callback handling Nordic UART Service (NUS) client events.
  441. *
  442. * @details This function is called to notify the application of NUS client events.
  443. *
  444. * @param[in] p_ble_nus_c NUS client handle. This identifies the NUS client.
  445. * @param[in] p_ble_nus_evt Pointer to the NUS client event.
  446. */
  447. /**@snippet [Handling events from the ble_nus_c module] */
  448. //char tmpData11[] = {0x60, 0x2C, 0x4E, 0x2D, 0x74, 0xB3, 0xAB, 0xF8, 0xE5, 0x28, 0xB4, 0x41, 0x3D, 0x52, 0x66, 0xC4};
  449. static void ble_nus_c_evt_handler(ble_nus_c_t * p_ble_nus_c, ble_nus_c_evt_t const * p_ble_nus_evt)
  450. {
  451. ret_code_t err_code;
  452. int i;
  453. switch (p_ble_nus_evt->evt_type)
  454. {
  455. case BLE_NUS_C_EVT_DISCOVERY_COMPLETE: // Connecting
  456. SystemManager.SecondData = 0;
  457. NRF_LOG_INFO("Discovery complete.");
  458. err_code = ble_nus_c_handles_assign(p_ble_nus_c, p_ble_nus_evt->conn_handle, &p_ble_nus_evt->handles);
  459. APP_ERROR_CHECK(err_code);
  460. err_code = ble_nus_c_tx_notif_enable(p_ble_nus_c);
  461. APP_ERROR_CHECK(err_code);
  462. NRF_LOG_INFO("Connected to device with Nordic UART Service.");
  463. switch(SystemManager.BandMode){
  464. case AES_ENC_CAR:
  465. CarEncryptEcb( AES_ENC_CAR );
  466. ble_nus_c_string_send(&m_ble_nus_c, SystemManager.AesEncData, 16);
  467. break;
  468. case AES_ENC_EMG:
  469. CarEncryptEcb( AES_ENC_EMG );
  470. ble_nus_c_string_send(&m_ble_nus_c, SystemManager.AesEncData, 16);
  471. break;
  472. case AES_ENC_PCA:
  473. CarEncryptEcb( AES_ENC_PCA );
  474. ble_nus_c_string_send(&m_ble_nus_c, SystemManager.AesEncData, 16); // PCAXX 전송
  475. break;
  476. }
  477. break;
  478. case BLE_NUS_C_EVT_NUS_TX_EVT: // BLE NUS Data Rx
  479. //ble_nus_chars_received_uart_print(p_ble_nus_evt->p_data, p_ble_nus_evt->data_len);
  480. //printf("Connected to device with Nordic UART Service. Len:%d\r\n", p_ble_nus_evt->data_len);
  481. #if 0
  482. for( i=0; i<p_ble_nus_evt->data_len; i++)
  483. {
  484. //NRF_LOG_RAW_INFO("%02x-", p_ble_nus_evt->p_data[i]);
  485. }
  486. #endif
  487. NRF_LOG_RAW_INFO("Type %x\n", p_ble_nus_evt->p_data[0]);
  488. if(SystemManager.SecondData == 0){
  489. switch(p_ble_nus_evt->p_data[0]){
  490. case 0x74: // 무선 비상벨 신호
  491. memcpy( SystemManager.TmpBuff, p_ble_nus_evt->p_data, p_ble_nus_evt->data_len );
  492. CarDecryptEcb( &SystemManager.TmpBuff[1], &SystemManager.AesEncData[0] );
  493. NRF_LOG_RAW_INFO("WES ");
  494. for( i=0; i<16; i++)
  495. {
  496. NRF_LOG_RAW_INFO("%02x ", SystemManager.AesEncData[i]);
  497. }
  498. memcpy( &(p_ble_nus_evt->p_data[1]), &SystemManager.AesEncData[0], 16 );
  499. switch(p_ble_nus_evt->p_data[12]){
  500. // 비상벨 버튼 동작시
  501. case DEV_NUS_EMG:
  502. NRF_LOG_INFO("TRANSFER SWITCH --- Emergency");
  503. SystemManager.BatLevel = p_ble_nus_evt->p_data[13];
  504. SystemManager.TransferVerHigh = p_ble_nus_evt->p_data[14];
  505. SystemManager.TransferVerLow = p_ble_nus_evt->p_data[15];
  506. switch(SystemManager.System_State){
  507. case SYSTEM_EMERGENCY_SIREN:
  508. case SYSTEM_SERVER_COMM:
  509. case SYSTEM_SERVER_COMM_REQ:
  510. break;
  511. case SYSTEM_REGISTER: // 등록 모드일 경우
  512. if( FindRegMac(ScanHSBuff) == 1 )
  513. {
  514. SystemManager.RegRequst = 0;
  515. SystemManager.LedBlinkRun = 0;
  516. SystemManager.System_State = SYSTEM_NONE;
  517. ble_nus_c_string_send(&m_ble_nus_c, "WESACK", 6);
  518. NRF_LOG_INFO("Device Registration Disable");
  519. SystemManager.SwitchOn = 0;
  520. PKBuzzerOff();
  521. PKLedOff();
  522. err_code = sd_ble_gap_disconnect(p_ble_nus_c->conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  523. APP_ERROR_CHECK(err_code);
  524. }
  525. break;
  526. case SYSTEM_NONE:
  527. SystemManager.LedBlinkRun = 1;
  528. SystemManager.LedBlinkTimer = 5000;
  529. SystemTimer.LED_TOGGLE_TIMER = 0;
  530. SystemManager.DevType = 0;
  531. SendEmergency();
  532. err_code = sd_ble_gap_disconnect(p_ble_nus_c->conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  533. APP_ERROR_CHECK(err_code);
  534. break;
  535. }
  536. SystemManager.DevType = 0;
  537. break;
  538. // 테스트 버튼 동작시
  539. case DEV_NUS_TEST:
  540. NRF_LOG_INFO("TRANSFER SWITCH --- TEST");
  541. SystemManager.BatLevel = p_ble_nus_evt->p_data[13];
  542. SystemManager.TransferVerHigh = p_ble_nus_evt->p_data[14];
  543. SystemManager.TransferVerLow = p_ble_nus_evt->p_data[15];
  544. switch(SystemManager.System_State){
  545. case SYSTEM_EMERGENCY_SIREN:
  546. case SYSTEM_SERVER_COMM:
  547. case SYSTEM_SERVER_COMM_REQ:
  548. break;
  549. case SYSTEM_REGISTER:
  550. if( FindRegMac(ScanHSBuff) == 1 )
  551. {
  552. SystemManager.RegRequst = 0;
  553. SystemManager.LedBlinkRun = 0;
  554. SystemManager.System_State = SYSTEM_NONE;
  555. ble_nus_c_string_send(&m_ble_nus_c, "WESACK", 6);
  556. NRF_LOG_INFO("Device Registration Disable");
  557. SystemManager.SwitchOn = 0;
  558. PKBuzzerOff();
  559. PKLedOff();
  560. }
  561. err_code = sd_ble_gap_disconnect(p_ble_nus_c->conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  562. APP_ERROR_CHECK(err_code);
  563. break;
  564. case SYSTEM_NONE:
  565. AliveTest();
  566. err_code = sd_ble_gap_disconnect(p_ble_nus_c->conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  567. APP_ERROR_CHECK(err_code);
  568. break;
  569. }
  570. SystemManager.DevType = 0;
  571. break;
  572. // 등록버튼 동작시
  573. case DEV_NUS_REG:
  574. NRF_LOG_INFO("TRANSFER SWITCH --- Device Registration");
  575. SystemTimer.DEV_REG_TIMER = 0;
  576. SystemManager.BatLevel = p_ble_nus_evt->p_data[13];
  577. SystemManager.TransferVerHigh = p_ble_nus_evt->p_data[14];
  578. SystemManager.TransferVerLow = p_ble_nus_evt->p_data[15];
  579. if(SystemManager.RegRequst) // 현재 등록모드일 경우
  580. {
  581. SystemManager.LedBlinkRun = COM_TYPE_SVR_RECV_REG_ANSWER;
  582. SystemManager.LedBlinkTimer = 2000;
  583. SystemTimer.LED_TOGGLE_TIMER = 0;
  584. for( i=0; i<6; i++)
  585. {
  586. NRF_LOG_INFO("0x%02x", SystemManager.PeerAddr[i]);
  587. }
  588. NRF_LOG_RAW_INFO("Reg Mac=>%s\n", SystemManager.PtrPeerAddrStr);
  589. NRF_LOG_RAW_INFO("\n");
  590. SaveRegMac(SystemManager.PtrPeerAddrStr);
  591. ble_nus_c_string_send(&m_ble_nus_c, "WESACK", 6);
  592. NRF_LOG_INFO("Send WESACK");
  593. SendCurrentRegDev();
  594. }else{
  595. ;
  596. }
  597. SystemManager.DevType = 0;
  598. break;
  599. // Alive 동작시
  600. case DEV_NUS_ALIVE:
  601. NRF_LOG_INFO("TRANSFER SWITCH --- Alive");
  602. SystemManager.BatLevel = p_ble_nus_evt->p_data[13];
  603. SystemManager.TransferVerHigh = p_ble_nus_evt->p_data[14];
  604. SystemManager.TransferVerLow = p_ble_nus_evt->p_data[15];
  605. SendAlive();
  606. err_code = sd_ble_gap_disconnect(p_ble_nus_c->conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  607. APP_ERROR_CHECK(err_code);
  608. SystemManager.DevType = 0;
  609. break;
  610. }
  611. break;
  612. case 0x73: // 밴드 주차
  613. NRF_LOG_RAW_INFO("Band Parking %d\n", p_ble_nus_evt->data_len);
  614. SystemManager.SecondData = 1;
  615. SystemManager.BandType = 0x73;
  616. memcpy( SystemManager.TmpBuff, p_ble_nus_evt->p_data, p_ble_nus_evt->data_len );
  617. CarDecryptEcb( &SystemManager.TmpBuff[1], SystemManager.AesEncData );
  618. NRF_LOG_RAW_INFO("Nus First Data ==>");
  619. for( i=0; i<16; i++)
  620. {
  621. NRF_LOG_RAW_INFO("%02x ", SystemManager.AesEncData[i]);
  622. }
  623. NRF_LOG_RAW_INFO("\n");
  624. SystemManager.Site[0] = SystemManager.AesEncData[4];
  625. SystemManager.Site[1] = SystemManager.AesEncData[5];
  626. SystemManager.Site[2] = SystemManager.AesEncData[6];
  627. SystemManager.Site[3] = SystemManager.AesEncData[7];
  628. SystemManager.Dong[0] = SystemManager.AesEncData[8];
  629. SystemManager.Dong[1] = SystemManager.AesEncData[9];
  630. SystemManager.Ho[0] = SystemManager.AesEncData[10];
  631. SystemManager.Ho[1] = SystemManager.AesEncData[11];
  632. SystemManager.Key_Num = SystemManager.AesEncData[12];
  633. SystemManager.Key_Type = SystemManager.AesEncData[13];
  634. SystemManager.Random_Out[0] = SystemManager.AesEncData[14];
  635. SystemManager.Random_Out[1] = SystemManager.AesEncData[15];
  636. break;
  637. case 0x72: // 밴드 비상
  638. NRF_LOG_RAW_INFO("Band Alarm %d\n", p_ble_nus_evt->data_len);
  639. SystemManager.SecondData = 1;
  640. SystemManager.BandType = 0x72;
  641. memcpy( SystemManager.TmpBuff, p_ble_nus_evt->p_data, p_ble_nus_evt->data_len );
  642. CarDecryptEcb( &SystemManager.TmpBuff[1], SystemManager.AesEncData );
  643. NRF_LOG_RAW_INFO("Nus First Data ==>");
  644. for( i=0; i<16; i++)
  645. {
  646. NRF_LOG_RAW_INFO("%02x ", SystemManager.AesEncData[i]);
  647. }
  648. NRF_LOG_RAW_INFO("\n");
  649. SystemManager.Site[0] = SystemManager.AesEncData[4];
  650. SystemManager.Site[1] = SystemManager.AesEncData[5];
  651. SystemManager.Site[2] = SystemManager.AesEncData[6];
  652. SystemManager.Site[3] = SystemManager.AesEncData[7];
  653. SystemManager.Dong[0] = SystemManager.AesEncData[8];
  654. SystemManager.Dong[1] = SystemManager.AesEncData[9];
  655. SystemManager.Ho[0] = SystemManager.AesEncData[10];
  656. SystemManager.Ho[1] = SystemManager.AesEncData[11];
  657. SystemManager.Key_Num = SystemManager.AesEncData[12];
  658. SystemManager.Key_Type = SystemManager.AesEncData[13];
  659. SystemManager.Random_Out[0] = SystemManager.AesEncData[14];
  660. SystemManager.Random_Out[1] = SystemManager.AesEncData[15];
  661. break;
  662. case 0x75: // 신규 원패스앱
  663. NRF_LOG_RAW_INFO("One Pass App %d\n", p_ble_nus_evt->data_len);
  664. SystemManager.SecondData = 1;
  665. SystemManager.BandType = 0x75;
  666. memcpy( SystemManager.TmpBuff, p_ble_nus_evt->p_data, p_ble_nus_evt->data_len );
  667. CarDecryptEcb( &SystemManager.TmpBuff[1], SystemManager.AesEncData );
  668. NRF_LOG_RAW_INFO("Nus First Data ==>");
  669. for( i=0; i<16; i++)
  670. {
  671. NRF_LOG_RAW_INFO("%02x ", SystemManager.AesEncData[i]);
  672. }
  673. NRF_LOG_RAW_INFO("\n");
  674. SystemManager.Site[0] = SystemManager.AesEncData[4];
  675. SystemManager.Site[1] = SystemManager.AesEncData[5];
  676. SystemManager.Site[2] = SystemManager.AesEncData[6];
  677. SystemManager.Site[3] = SystemManager.AesEncData[7];
  678. SystemManager.Dong[0] = SystemManager.AesEncData[8];
  679. SystemManager.Dong[1] = SystemManager.AesEncData[9];
  680. SystemManager.Ho[0] = SystemManager.AesEncData[10];
  681. SystemManager.Ho[1] = SystemManager.AesEncData[11];
  682. SystemManager.Key_Num = SystemManager.AesEncData[12];
  683. SystemManager.Key_Type = SystemManager.AesEncData[13];
  684. SystemManager.Random_Out[0] = SystemManager.AesEncData[14];
  685. SystemManager.Random_Out[1] = SystemManager.AesEncData[15];
  686. break;
  687. }
  688. }else if( SystemManager.SecondData == 1 ){ // 두번째 Nus Packet
  689. SystemManager.SecondData = 0;
  690. // for( i=0; i<p_ble_nus_evt->data_len; i++)
  691. // {
  692. // NRF_LOG_RAW_INFO("%02x ", p_ble_nus_evt->p_data[i]);
  693. // }
  694. memcpy( SystemManager.TmpBuff, p_ble_nus_evt->p_data, p_ble_nus_evt->data_len );
  695. #if 0
  696. NRF_LOG_RAW_INFO("======== SystemManager.TmpBuff\n");
  697. for( i=0; i<p_ble_nus_evt->data_len; i++)
  698. {
  699. NRF_LOG_RAW_INFO("%02x ",SystemManager.TmpBuff[i]);
  700. }
  701. NRF_LOG_RAW_INFO("\n");
  702. #endif
  703. CarDecryptEcb( &SystemManager.TmpBuff[0], SystemManager.AesEncData );
  704. NRF_LOG_RAW_INFO("Nus Secound Data ===>");
  705. for( i=0; i<16; i++)
  706. {
  707. NRF_LOG_RAW_INFO("%02x ", SystemManager.AesEncData[i]);
  708. }
  709. NRF_LOG_RAW_INFO("\n");
  710. switch(SystemManager.BandType){
  711. case 0x73: // BAND PARKING
  712. if( SystemManager.ServerCon == 0)
  713. {
  714. CarEncryptEcbACK(SystemManager.BandType);
  715. ble_nus_c_string_send(&m_ble_nus_c, SystemManager.AesEncData, 16);
  716. SystemManager.BandMode = 0;
  717. SendParkingBand();
  718. // jakuja disconnect
  719. err_code = sd_ble_gap_disconnect(p_ble_nus_c->conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  720. APP_ERROR_CHECK(err_code);
  721. }
  722. break;
  723. case 0x72: // BAND EMG
  724. if( SystemManager.ServerCon == 0)
  725. {
  726. CarEncryptEcbACK(SystemManager.BandType);
  727. ble_nus_c_string_send(&m_ble_nus_c, SystemManager.AesEncData, 16);
  728. switch(SystemManager.System_State){
  729. case SYSTEM_NONE:
  730. SendEmergencyBand();
  731. break;
  732. case SYSTEM_REGISTER:
  733. case SYSTEM_EMERGENCY_SIREN:
  734. case SYSTEM_SERVER_COMM:
  735. case SYSTEM_SERVER_COMM_REQ:
  736. break;
  737. }
  738. err_code = sd_ble_gap_disconnect(p_ble_nus_c->conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  739. APP_ERROR_CHECK(err_code);
  740. SystemManager.BandMode = 0;
  741. }
  742. break;
  743. case 0x75: // New iOS App
  744. if( SystemManager.ServerCon == 0)
  745. {
  746. PcaEncryptEcbACK(SystemManager.BandType);
  747. ble_nus_c_string_send(&m_ble_nus_c, SystemManager.AesEncData, 16);
  748. SystemManager.DevType = 0;
  749. SendParkingApp();
  750. err_code = sd_ble_gap_disconnect(p_ble_nus_c->conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  751. APP_ERROR_CHECK(err_code);
  752. NRF_LOG_RAW_INFO("======== Send CARACK");
  753. }
  754. break;
  755. }
  756. }
  757. break;
  758. case BLE_NUS_C_EVT_DISCONNECTED:
  759. NRF_LOG_INFO("Disconnected --------------------\n");
  760. scan_start();
  761. break;
  762. }
  763. }
  764. /**@snippet [Handling events from the ble_nus_c module] */
  765. /**
  766. * @brief Function for handling shutdown events.
  767. *
  768. * @param[in] event Shutdown type.
  769. */
  770. static bool shutdown_handler(nrf_pwr_mgmt_evt_t event)
  771. {
  772. ret_code_t err_code;
  773. err_code = bsp_indication_set(BSP_INDICATE_IDLE);
  774. APP_ERROR_CHECK(err_code);
  775. switch (event)
  776. {
  777. case NRF_PWR_MGMT_EVT_PREPARE_WAKEUP:
  778. // Prepare wakeup buttons.
  779. err_code = bsp_btn_ble_sleep_mode_prepare();
  780. APP_ERROR_CHECK(err_code);
  781. break;
  782. default:
  783. break;
  784. }
  785. return true;
  786. }
  787. NRF_PWR_MGMT_HANDLER_REGISTER(shutdown_handler, APP_SHUTDOWN_HANDLER_PRIORITY);
  788. /**@brief Function for handling BLE events.
  789. *
  790. * @param[in] p_ble_evt Bluetooth stack event.
  791. * @param[in] p_context Unused.
  792. */
  793. static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context)
  794. {
  795. int i;
  796. ret_code_t err_code;
  797. ble_gap_evt_t const * p_gap_evt = &p_ble_evt->evt.gap_evt;
  798. switch (p_ble_evt->header.evt_id)
  799. {
  800. case BLE_GAP_EVT_ADV_REPORT :
  801. //NRF_LOG_INFO("BLE_GAP_EVT_ADV_REPORT : %d", &p_gap_evt->params.adv_report.data.len);
  802. //NRF_LOG_INFO(&p_gap_evt->params.adv_report);
  803. break;
  804. case BLE_GAP_EVT_SCAN_REQ_REPORT:
  805. NRF_LOG_INFO("BLE_GAP_EVT_SCAN_REQ_REPORT");
  806. break;
  807. case BLE_GAP_EVT_CONNECTED:
  808. NRF_LOG_INFO("BLE_GAP_EVT_CONNECTED");
  809. err_code = ble_nus_c_handles_assign(&m_ble_nus_c, p_ble_evt->evt.gap_evt.conn_handle, NULL);
  810. APP_ERROR_CHECK(err_code);
  811. err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
  812. APP_ERROR_CHECK(err_code);
  813. // start discovery of services. The NUS Client waits for a discovery result
  814. err_code = ble_db_discovery_start(&m_db_disc, p_ble_evt->evt.gap_evt.conn_handle);
  815. APP_ERROR_CHECK(err_code);
  816. break;
  817. case BLE_GAP_EVT_DISCONNECTED:
  818. NRF_LOG_INFO("Disconnected. conn_handle: 0x%x, reason: 0x%x",
  819. p_gap_evt->conn_handle,
  820. p_gap_evt->params.disconnected.reason);
  821. break;
  822. case BLE_GAP_EVT_TIMEOUT:
  823. if (p_gap_evt->params.timeout.src == BLE_GAP_TIMEOUT_SRC_CONN)
  824. {
  825. NRF_LOG_INFO("Connection Request timed out.");
  826. }
  827. break;
  828. case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
  829. // Pairing not supported.
  830. err_code = sd_ble_gap_sec_params_reply(p_ble_evt->evt.gap_evt.conn_handle, BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP, NULL, NULL);
  831. APP_ERROR_CHECK(err_code);
  832. break;
  833. case BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST:
  834. // Accepting parameters requested by peer.
  835. err_code = sd_ble_gap_conn_param_update(p_gap_evt->conn_handle,
  836. &p_gap_evt->params.conn_param_update_request.conn_params);
  837. APP_ERROR_CHECK(err_code);
  838. break;
  839. case BLE_GAP_EVT_PHY_UPDATE_REQUEST:
  840. {
  841. NRF_LOG_DEBUG("PHY update request.");
  842. ble_gap_phys_t const phys =
  843. {
  844. .rx_phys = BLE_GAP_PHY_AUTO,
  845. .tx_phys = BLE_GAP_PHY_AUTO,
  846. };
  847. err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys);
  848. APP_ERROR_CHECK(err_code);
  849. } break;
  850. case BLE_GATTC_EVT_TIMEOUT:
  851. // Disconnect on GATT Client timeout event.
  852. NRF_LOG_DEBUG("GATT Client Timeout.");
  853. err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle,
  854. BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  855. APP_ERROR_CHECK(err_code);
  856. break;
  857. case BLE_GATTS_EVT_TIMEOUT:
  858. // Disconnect on GATT Server timeout event.
  859. NRF_LOG_DEBUG("GATT Server Timeout.");
  860. err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle,
  861. BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  862. APP_ERROR_CHECK(err_code);
  863. break;
  864. default:
  865. break;
  866. }
  867. }
  868. /**@brief Function for initializing the BLE stack.
  869. *
  870. * @details Initializes the SoftDevice and the BLE event interrupt.
  871. */
  872. static void ble_stack_init(void)
  873. {
  874. ret_code_t err_code;
  875. err_code = nrf_sdh_enable_request();
  876. APP_ERROR_CHECK(err_code);
  877. // Configure the BLE stack using the default settings.
  878. // Fetch the start address of the application RAM.
  879. uint32_t ram_start = 0;
  880. err_code = nrf_sdh_ble_default_cfg_set(APP_BLE_CONN_CFG_TAG, &ram_start);
  881. APP_ERROR_CHECK(err_code);
  882. // Enable BLE stack.
  883. err_code = nrf_sdh_ble_enable(&ram_start);
  884. APP_ERROR_CHECK(err_code);
  885. // Register a handler for BLE events.
  886. NRF_SDH_BLE_OBSERVER(m_ble_observer, APP_BLE_OBSERVER_PRIO, ble_evt_handler, NULL);
  887. }
  888. /**@brief Function for handling events from the GATT library. */
  889. void gatt_evt_handler(nrf_ble_gatt_t * p_gatt, nrf_ble_gatt_evt_t const * p_evt)
  890. {
  891. if (p_evt->evt_id == NRF_BLE_GATT_EVT_ATT_MTU_UPDATED)
  892. {
  893. NRF_LOG_INFO("ATT MTU exchange completed.");
  894. m_ble_nus_max_data_len = p_evt->params.att_mtu_effective - OPCODE_LENGTH - HANDLE_LENGTH;
  895. //m_ble_nus_max_data_len = 244;
  896. NRF_LOG_INFO("Ble NUS max data length set to 0x%X(%d)", m_ble_nus_max_data_len, m_ble_nus_max_data_len);
  897. }
  898. }
  899. /**@brief Function for initializing the GATT library. */
  900. void gatt_init(void)
  901. {
  902. ret_code_t err_code;
  903. err_code = nrf_ble_gatt_init(&m_gatt, gatt_evt_handler);
  904. APP_ERROR_CHECK(err_code);
  905. err_code = nrf_ble_gatt_att_mtu_central_set(&m_gatt, NRF_SDH_BLE_GATT_MAX_MTU_SIZE);
  906. APP_ERROR_CHECK(err_code);
  907. }
  908. /**@brief Function for handling events from the BSP module.
  909. *
  910. * @param[in] event Event generated by button press.
  911. */
  912. void bsp_event_handler(bsp_event_t event)
  913. {
  914. ret_code_t err_code;
  915. switch (event)
  916. {
  917. case BSP_EVENT_SLEEP:
  918. nrf_pwr_mgmt_shutdown(NRF_PWR_MGMT_SHUTDOWN_GOTO_SYSOFF);
  919. break;
  920. case BSP_EVENT_DISCONNECT:
  921. err_code = sd_ble_gap_disconnect(m_ble_nus_c.conn_handle,
  922. BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  923. if (err_code != NRF_ERROR_INVALID_STATE)
  924. {
  925. APP_ERROR_CHECK(err_code);
  926. }
  927. break;
  928. default:
  929. break;
  930. }
  931. }
  932. /**@brief Function for initializing the UART. */
  933. static void uart_init(void)
  934. {
  935. ret_code_t err_code;
  936. app_uart_comm_params_t const comm_params =
  937. {
  938. .rx_pin_no = RX_PIN_NUMBER,
  939. .tx_pin_no = TX_PIN_NUMBER,
  940. .rts_pin_no = RTS_PIN_NUMBER,
  941. .cts_pin_no = CTS_PIN_NUMBER,
  942. .flow_control = APP_UART_FLOW_CONTROL_DISABLED,
  943. .use_parity = false,
  944. .baud_rate = UART_BAUDRATE_BAUDRATE_Baud9600
  945. };
  946. APP_UART_FIFO_INIT(&comm_params,
  947. UART_RX_BUF_SIZE,
  948. UART_TX_BUF_SIZE,
  949. uart_event_handle,
  950. APP_IRQ_PRIORITY_LOWEST,
  951. err_code);
  952. APP_ERROR_CHECK(err_code);
  953. }
  954. /**@brief Function for initializing the Nordic UART Service (NUS) client. */
  955. static void nus_c_init(void)
  956. {
  957. ret_code_t err_code;
  958. ble_nus_c_init_t init;
  959. init.evt_handler = ble_nus_c_evt_handler;
  960. init.error_handler = nus_error_handler;
  961. init.p_gatt_queue = &m_ble_gatt_queue;
  962. err_code = ble_nus_c_init(&m_ble_nus_c, &init);
  963. APP_ERROR_CHECK(err_code);
  964. }
  965. /**@brief Function for initializing buttons and leds. */
  966. static void buttons_leds_init(void)
  967. {
  968. ret_code_t err_code;
  969. bsp_event_t startup_event;
  970. err_code = bsp_init(BSP_INIT_LEDS, bsp_event_handler);
  971. APP_ERROR_CHECK(err_code);
  972. err_code = bsp_btn_ble_init(NULL, &startup_event);
  973. APP_ERROR_CHECK(err_code);
  974. }
  975. /**@brief Function for initializing the timer. */
  976. static void timer_init(void)
  977. {
  978. ret_code_t err_code = app_timer_init();
  979. APP_ERROR_CHECK(err_code);
  980. app_timer_create(&m_our_char_timer_id, APP_TIMER_MODE_REPEATED, timer_timeout_handler);
  981. }
  982. /**@brief Function for initializing the nrf log module. */
  983. static void log_init(void)
  984. {
  985. ret_code_t err_code = NRF_LOG_INIT(NULL);
  986. APP_ERROR_CHECK(err_code);
  987. NRF_LOG_DEFAULT_BACKENDS_INIT();
  988. }
  989. /**@brief Function for initializing power management.
  990. */
  991. static void power_management_init(void)
  992. {
  993. ret_code_t err_code;
  994. err_code = nrf_pwr_mgmt_init();
  995. APP_ERROR_CHECK(err_code);
  996. }
  997. /** @brief Function for initializing the database discovery module. */
  998. static void db_discovery_init(void)
  999. {
  1000. ble_db_discovery_init_t db_init;
  1001. memset(&db_init, 0, sizeof(ble_db_discovery_init_t));
  1002. db_init.evt_handler = db_disc_handler;
  1003. db_init.p_gatt_queue = &m_ble_gatt_queue;
  1004. ret_code_t err_code = ble_db_discovery_init(&db_init);
  1005. APP_ERROR_CHECK(err_code);
  1006. }
  1007. /**@brief Function for handling the idle state (main loop).
  1008. *
  1009. * @details Handles any pending log operations, then sleeps until the next event occurs.
  1010. */
  1011. static void idle_state_handle(void)
  1012. {
  1013. if (NRF_LOG_PROCESS() == false)
  1014. {
  1015. nrf_pwr_mgmt_run();
  1016. }
  1017. }
  1018. /**@brief Function for handling events from the button handler module.
  1019. *
  1020. * @param[in] pin_no The pin that the event applies to.
  1021. * @param[in] button_action The button action (press/release).
  1022. */
  1023. static void button_event_handler(uint8_t pin_no, uint8_t button_action)
  1024. {
  1025. ret_code_t err_code;
  1026. uint32_t gpSts;
  1027. switch (pin_no)
  1028. {
  1029. case LEDBUTTON_BUTTON:
  1030. NRF_LOG_INFO("Send button data");
  1031. gpSts = nrf_gpio_pin_read(BSP_BUTTON_0);
  1032. NRF_LOG_INFO("gpSts=%d\r\n", gpSts);
  1033. if(gpSts == 0) // BTN_PRESSED=0
  1034. {
  1035. nrf_gpio_pin_clear(LED_1);
  1036. NRF_LOG_INFO("PRESSED\r\n");
  1037. SystemManager.SwitchOn = 1;
  1038. SendEmergencyLocal();
  1039. }else{
  1040. nrf_gpio_pin_set(LED_1);
  1041. NRF_LOG_INFO("Released\r\n");
  1042. }
  1043. break;
  1044. default:
  1045. APP_ERROR_HANDLER(pin_no);
  1046. break;
  1047. }
  1048. }
  1049. /**@brief Function for initializing the button handler module.
  1050. */
  1051. static void buttons_init(void)
  1052. {
  1053. ret_code_t err_code;
  1054. //The array must be static because a pointer to it will be saved in the button handler module.
  1055. static app_button_cfg_t buttons[] =
  1056. {
  1057. {LEDBUTTON_BUTTON, false, BUTTON_PULL, button_event_handler}
  1058. };
  1059. err_code = app_button_init(buttons, ARRAY_SIZE(buttons),
  1060. BUTTON_DETECTION_DELAY);
  1061. APP_ERROR_CHECK(err_code);
  1062. }
  1063. static void GPOut_Init()
  1064. {
  1065. uint32_t i;
  1066. for (i = 0; i < 4; ++i)
  1067. {
  1068. nrf_gpio_cfg_output(m_board_led_list[i]);
  1069. }
  1070. }
  1071. void ble_get_mac(uint8_t addr[8])
  1072. {
  1073. uint32_t err_code;
  1074. ble_gap_addr_t ble_addr;
  1075. err_code = sd_ble_gap_address_get(&ble_addr);
  1076. APP_ERROR_CHECK(err_code);
  1077. IPV6_EUI64_CREATE_FROM_EUI48(addr, ble_addr.addr, ble_addr.addr_type);
  1078. }
  1079. void _1000ms_timer_handle()
  1080. {
  1081. // NRF_LOG_RAW_INFO("_1000ms_timer_handle()\n");
  1082. switch(SystemManager.System_State){
  1083. case SYSTEM_NONE:
  1084. SystemTimer.SYSTEM_REGISTER_CNT = 0;
  1085. SystemTimer.SYSTEM_SERVER_COMM_CNT = 0;
  1086. SystemTimer.SYSTEM_SERVER_COMM_REQ_CNT = 0;
  1087. SystemTimer.SYSTEM_EMERGENCY_SIREN_CNT = 0;
  1088. break;
  1089. case SYSTEM_EMERGENCY_SIREN:
  1090. SystemTimer.SYSTEM_EMERGENCY_SIREN_CNT++;
  1091. NRF_LOG_RAW_INFO("_1000ms_timer_handle(SYSTEM_EMERGENCY_SIREN) -- [%d / %d]\n", SystemTimer.SYSTEM_EMERGENCY_SIREN_CNT, 60*10);
  1092. if(SystemTimer.SYSTEM_EMERGENCY_SIREN_CNT >= 60*10){
  1093. SystemTimer.SYSTEM_EMERGENCY_SIREN_CNT = 0;
  1094. SystemManager.System_State = SYSTEM_NONE;
  1095. PKLedOff();
  1096. PKBuzzerOff();
  1097. SystemManager.LedBlinkRun = 0;
  1098. SystemManager.Emg_Ack_Flag = 0;
  1099. }
  1100. if(SystemManager.Emg_Ack_Flag){
  1101. SystemManager.Emg_Resend_Cnt++;
  1102. if(SystemManager.Emg_Resend_Cnt >= 10){
  1103. SystemManager.Emg_Resend_Cnt = 0;
  1104. ReSendEmergency();
  1105. }
  1106. }
  1107. break;
  1108. case SYSTEM_SERVER_COMM:
  1109. SystemTimer.SYSTEM_SERVER_COMM_CNT++;
  1110. NRF_LOG_RAW_INFO("_1000ms_timer_handle(SYSTEM_SERVER_COMM) -- [%d / %d]\n", SystemTimer.SYSTEM_SERVER_COMM_CNT, 60*3+30);
  1111. if(SystemTimer.SYSTEM_SERVER_COMM_CNT >= 60*3+30){
  1112. SystemTimer.SYSTEM_SERVER_COMM_CNT = 0;
  1113. SystemManager.System_State = SYSTEM_NONE;
  1114. PKLedOff();
  1115. PKMicOff();
  1116. PKSpeakerOff();
  1117. SystemManager.LedBlinkRun = 0;
  1118. }
  1119. break;
  1120. case SYSTEM_REGISTER:
  1121. SystemTimer.SYSTEM_REGISTER_CNT++;
  1122. NRF_LOG_RAW_INFO("_1000ms_timer_handle(SYSTEM_REGISTER) -- [%d / %d]\n", SystemTimer.SYSTEM_REGISTER_CNT, 60*1);
  1123. if(SystemTimer.SYSTEM_REGISTER_CNT >= 60*1){
  1124. SystemTimer.SYSTEM_REGISTER_CNT = 0;
  1125. SystemManager.RegRequst = 0;
  1126. SystemManager.System_State = SYSTEM_NONE;
  1127. PKLedOff();
  1128. SystemManager.LedBlinkRun = 0;
  1129. }
  1130. break;
  1131. case SYSTEM_SERVER_COMM_REQ:
  1132. SystemTimer.SYSTEM_SERVER_COMM_REQ_CNT++;
  1133. NRF_LOG_RAW_INFO("_1000ms_timer_handle(SYSTEM_SERVER_COMM_REQ) -- [%d / %d]\n", SystemTimer.SYSTEM_SERVER_COMM_REQ_CNT, 60*1);
  1134. if(SystemTimer.SYSTEM_SERVER_COMM_REQ_CNT >= 60*1){
  1135. SystemTimer.SYSTEM_SERVER_COMM_REQ_CNT = 0;
  1136. SystemManager.RegRequst = 0;
  1137. SystemManager.System_State = SYSTEM_NONE;
  1138. PKLedOff();
  1139. PKBuzzerOff();
  1140. SystemManager.LedBlinkRun = 0;
  1141. }
  1142. break;
  1143. }
  1144. }
  1145. int main(void)
  1146. {
  1147. uint8_t i;
  1148. ret_code_t err_code;
  1149. ble_gap_addr_t dd;
  1150. dd.addr_id_peer = 0;
  1151. dd.addr_type = BLE_GAP_ADDR_TYPE_PUBLIC;
  1152. // Initialize.
  1153. log_init();
  1154. /* Register first to receive an event when initialization is complete. */
  1155. (void) fds_register(fds_evt_handler);
  1156. NRF_LOG_RAW_INFO("\n===========================================================\n\n");
  1157. NRF_LOG_RAW_INFO("IES-600RB CENTRAL Program Start -- Ver 0.92 2022/03/09\n");
  1158. NRF_LOG_RAW_INFO("\n===========================================================\n\n");
  1159. // NRF_LOG_RAW_INFO("Initializing fds...\n");
  1160. err_code = fds_init();
  1161. APP_ERROR_CHECK(err_code);
  1162. timer_init();
  1163. uart_init();
  1164. buttons_init();
  1165. GPOut_Init();
  1166. db_discovery_init();
  1167. power_management_init();
  1168. //sd_ble_gap_addr_get(&old_ble_addr);
  1169. ble_stack_init();
  1170. sd_ble_gap_addr_get(&old_ble_addr);
  1171. dd.addr[0] = IES200_1ST_MAC;
  1172. dd.addr[1] = IES200_2ST_MAC;
  1173. dd.addr[2] = IES200_3ST_MAC;
  1174. dd.addr[3] = old_ble_addr.addr[3];
  1175. dd.addr[4] = old_ble_addr.addr[4];
  1176. dd.addr[5] = old_ble_addr.addr[5];
  1177. sd_ble_gap_addr_set(&dd);
  1178. sd_ble_gap_addr_get(&new_ble_addr);
  1179. gatt_init();
  1180. nus_c_init();
  1181. scan_init();
  1182. for(i=0; i<3; i++){
  1183. PKLedOn();
  1184. nrf_delay_ms(100);
  1185. PKLedOff();
  1186. nrf_delay_ms(100);
  1187. }
  1188. // Start execution.
  1189. //printf("BLE UART central example started.=====\r\n");
  1190. NRF_LOG_INFO("BLE UART central example started.");
  1191. scan_start();
  1192. application_timers_start();
  1193. // Enabling the buttons.
  1194. err_code = app_button_enable();
  1195. APP_ERROR_CHECK(err_code);
  1196. PKLedOff();
  1197. //FlashTest();
  1198. LoadRegMac();
  1199. //delete_all_begin();
  1200. Server_Answer_Version();
  1201. nrf_delay_ms(1000);
  1202. Server_Answer_Version();
  1203. // Enter main loop.
  1204. for (;;)
  1205. {
  1206. idle_state_handle();
  1207. USART_DataCheck();
  1208. ParseEventServer();
  1209. LedToggle();
  1210. delete_all_process();
  1211. if(SystemTimer.MS_1000_TICK){
  1212. SystemTimer.MS_1000_TICK = 0;
  1213. _1000ms_timer_handle();
  1214. }
  1215. }
  1216. }