main(3917).c 46 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725
  1. /**
  2. * Copyright (c) 2016 - 2020, Nordic Semiconductor ASA
  3. *
  4. * All rights reserved.
  5. *
  6. * Redistribution and use in source and binary forms, with or without modification,
  7. * are permitted provided that the following conditions are met:
  8. *
  9. * 1. Redistributions of source code must retain the above copyright notice, this
  10. * list of conditions and the following disclaimer.
  11. *
  12. * 2. Redistributions in binary form, except as embedded into a Nordic
  13. * Semiconductor ASA integrated circuit in a product or a software update for
  14. * such product, must reproduce the above copyright notice, this list of
  15. * conditions and the following disclaimer in the documentation and/or other
  16. * materials provided with the distribution.
  17. *
  18. * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
  19. * contributors may be used to endorse or promote products derived from this
  20. * software without specific prior written permission.
  21. *
  22. * 4. This software, with or without modification, must only be used with a
  23. * Nordic Semiconductor ASA integrated circuit.
  24. *
  25. * 5. Any software provided in binary form under this license must not be reverse
  26. * engineered, decompiled, modified and/or disassembled.
  27. *
  28. * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
  29. * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  30. * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
  31. * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
  32. * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  33. * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
  34. * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  35. * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  36. * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
  37. * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  38. *
  39. */
  40. /*************************************************************************************
  41. 2022/01/26
  42. 업데이트 후 바뀐 버전정보 확인을 위해 부팅시 서버에 버전정보 전달
  43. 2022/03/09 (Release V1.0)
  44. 비상벨 프로토콜 확인
  45. 안드로이드 원패스 필터 수정
  46. 2022/03/24 (Release V1.1)
  47. 안드로이드 원패스 필터 수정
  48. New iOS 원패스 추가
  49. *************************************************************************************/
  50. #include <stdio.h>
  51. #include <stdint.h>
  52. #include <stdbool.h>
  53. #include "nordic_common.h"
  54. #include "app_error.h"
  55. #include "app_uart.h"
  56. #include "ble_db_discovery.h"
  57. #include "app_timer.h"
  58. #include "app_util.h"
  59. #include "bsp_btn_ble.h"
  60. #include "ble.h"
  61. #include "ble_gap.h"
  62. #include "ble_hci.h"
  63. #include "nrf_sdh.h"
  64. #include "nrf_sdh_ble.h"
  65. #include "nrf_sdh_soc.h"
  66. #include "ble_nus_c.h"
  67. #include "nrf_ble_gatt.h"
  68. #include "nrf_pwr_mgmt.h"
  69. #include "nrf_ble_scan.h"
  70. #include "peer_manager.h"
  71. #include "nrf_log.h"
  72. #include "nrf_log_ctrl.h"
  73. #include "nrf_log_default_backends.h"
  74. #include "our_service.h"
  75. #include "board_gpi.h"
  76. #include "nrf_spi.h"
  77. #include "nrf_drv_spi.h"
  78. #include "app_util_platform.h"
  79. #include "nrf_gpio.h"
  80. #include "nrf_delay.h"
  81. #include "boards.h"
  82. #include "app_error.h"
  83. #include <string.h>
  84. #include "main.h"
  85. #include "sysmgr.h"
  86. #define APP_BLE_CONN_CFG_TAG 1 /**< Tag that refers to the BLE stack configuration set with @ref sd_ble_cfg_set. The default tag is @ref BLE_CONN_CFG_TAG_DEFAULT. */
  87. #define APP_BLE_OBSERVER_PRIO 3 /**< BLE observer priority of the application. There is no need to modify this value. */
  88. #define UART_TX_BUF_SIZE 256 /**< UART TX buffer size. */
  89. #define UART_RX_BUF_SIZE 256 /**< UART RX buffer size. */
  90. #define NUS_SERVICE_UUID_TYPE BLE_UUID_TYPE_VENDOR_BEGIN /**< UUID type for the Nordic UART Service (vendor specific). */
  91. #define ECHOBACK_BLE_UART_DATA 1 /**< Echo the UART data that is received over the Nordic UART Service (NUS) back to the sender. */
  92. BLE_NUS_C_DEF(m_ble_nus_c); /**< BLE Nordic UART Service (NUS) client instance. */
  93. NRF_BLE_GATT_DEF(m_gatt); /**< GATT module instance. */
  94. BLE_DB_DISCOVERY_DEF(m_db_disc); /**< Database discovery module instance. */
  95. NRF_BLE_SCAN_DEF(m_scan); /**< Scanning Module instance. */
  96. NRF_BLE_GQ_DEF(m_ble_gatt_queue, /**< BLE GATT Queue instance. */
  97. NRF_SDH_BLE_CENTRAL_LINK_COUNT,
  98. NRF_BLE_GQ_QUEUE_SIZE);
  99. #define SPI_INSTANCE 0 /**< SPI instance index. */
  100. //const nrf_drv_spi_t spi = NRF_DRV_SPI_INSTANCE(SPI_INSTANCE); /**< SPI instance. */
  101. //const nrf_drv_spi_t spi = { 0, { .spi = spi0 }, false }; /**< SPI instance. */
  102. volatile bool spi_xfer_done; /**< Flag used to indicate that SPI instance completed the transfer. */
  103. APP_TIMER_DEF(m_our_char_timer_id);
  104. #define OUR_CHAR_TIMER_INTERVAL APP_TIMER_TICKS(1) // 1 ms intervals
  105. static uint16_t m_ble_nus_max_data_len = BLE_GATT_ATT_MTU_DEFAULT - OPCODE_LENGTH - HANDLE_LENGTH; /**< Maximum length of data (in bytes) that can be transmitted to the peer by the Nordic UART service module. */
  106. static uint16_t m_conn_handle = BLE_CONN_HANDLE_INVALID;
  107. unsigned int gTimeCounter = 0;
  108. /**@brief NUS UUID. */
  109. static ble_uuid_t const m_nus_uuid =
  110. {
  111. .uuid = BLE_UUID_NUS_SERVICE,
  112. .type = NUS_SERVICE_UUID_TYPE
  113. };
  114. //static char my_addr[6] = {0xE9, 0xB1, 0x8D, 0xA2, 0xED, 0x07}; C
  115. static char my_addr[6] = {0x65, 0x7C, 0x2C, 0x69, 0xC1, 0xDB}; //P
  116. //static char my_addr_1[6] = {0x26, 0xAA, 0xEE, 0x75, 0x90, 0xCC}; //SAMPLE
  117. //static char my_addr[6] = {0x65, 0x7C, 0x2C, 0x69, 0xC1, 0xDD}; //P TEST Bad-Mac
  118. static char my_addr_1[6] = {0x26, 0xAA, 0xEE, 0x75, 0x90, 0xCd}; //SAMPLE bad-mac
  119. extern char ScanHSBuff[];
  120. extern uint8_t m_tx_buf[]; /**< TX buffer. */
  121. extern uint8_t m_rx_buf[]; /**< RX buffer. */
  122. extern uint8_t m_length; /**< Transfer length. */
  123. /* Flag to check fds initialization. */
  124. static bool volatile m_fds_initialized;
  125. /* Array to map FDS events to strings. */
  126. static char const * fds_evt_str[] =
  127. {
  128. "FDS_EVT_INIT",
  129. "FDS_EVT_WRITE",
  130. "FDS_EVT_UPDATE",
  131. "FDS_EVT_DEL_RECORD",
  132. "FDS_EVT_DEL_FILE",
  133. "FDS_EVT_GC",
  134. };
  135. /* Keep track of the progress of a delete_all operation. */
  136. static struct
  137. {
  138. bool delete_next; //!< Delete next record.
  139. bool pending; //!< Waiting for an fds FDS_EVT_DEL_RECORD event, to delete the next record.
  140. } m_delete_all;
  141. ble_gap_addr_t old_ble_addr;
  142. ble_gap_addr_t new_ble_addr;
  143. static void fds_evt_handler(fds_evt_t const * p_evt)
  144. {
  145. if (p_evt->result == NRF_SUCCESS)
  146. {
  147. NRF_LOG_INFO("Event: %s received (NRF_SUCCESS)",
  148. fds_evt_str[p_evt->id]);
  149. }
  150. else
  151. {
  152. NRF_LOG_INFO("Event: %s received (%s)",
  153. fds_evt_str[p_evt->id],
  154. fds_err_str(p_evt->result));
  155. }
  156. switch (p_evt->id)
  157. {
  158. case FDS_EVT_INIT:
  159. if (p_evt->result == NRF_SUCCESS)
  160. {
  161. m_fds_initialized = true;
  162. }
  163. break;
  164. case FDS_EVT_WRITE:
  165. {
  166. if (p_evt->result == NRF_SUCCESS)
  167. {
  168. NRF_LOG_INFO("Record ID:\t0x%04x", p_evt->write.record_id);
  169. NRF_LOG_INFO("File ID:\t0x%04x", p_evt->write.file_id);
  170. NRF_LOG_INFO("Record key:\t0x%04x", p_evt->write.record_key);
  171. }
  172. } break;
  173. case FDS_EVT_DEL_RECORD:
  174. {
  175. if (p_evt->result == NRF_SUCCESS)
  176. {
  177. NRF_LOG_INFO("Record ID:\t0x%04x", p_evt->del.record_id);
  178. NRF_LOG_INFO("File ID:\t0x%04x", p_evt->del.file_id);
  179. NRF_LOG_INFO("Record key:\t0x%04x", p_evt->del.record_key);
  180. }
  181. m_delete_all.pending = false;
  182. } break;
  183. default:
  184. break;
  185. }
  186. }
  187. /**@brief Begin deleting all records, one by one. */
  188. void delete_all_begin(void)
  189. {
  190. m_delete_all.delete_next = true;
  191. }
  192. /**@brief Process a delete all command.
  193. *
  194. * Delete records, one by one, until no records are left.
  195. */
  196. void delete_all_process(void)
  197. {
  198. if (m_delete_all.delete_next & !m_delete_all.pending)
  199. {
  200. NRF_LOG_INFO("Deleting next record.");
  201. m_delete_all.delete_next = record_delete_next();
  202. if (!m_delete_all.delete_next)
  203. {
  204. NRF_LOG_INFO("No records left to delete.");
  205. }
  206. }
  207. }
  208. /**
  209. * @brief SPI user event handler.
  210. * @param event
  211. */
  212. void spi_event_handler(nrf_drv_spi_evt_t const * p_event,
  213. void * p_context)
  214. {
  215. spi_xfer_done = true;
  216. NRF_LOG_INFO("Transfer completed.");
  217. if (m_rx_buf[0] != 0)
  218. {
  219. NRF_LOG_INFO(" Received:");
  220. NRF_LOG_HEXDUMP_INFO(m_rx_buf, strlen((const char *)m_rx_buf));
  221. }
  222. }
  223. // 1ms tick (1ms interrupt)
  224. // ALREADY_DONE_FOR_YOU: This is a timer event handler
  225. static void timer_timeout_handler(void * p_context)
  226. {
  227. // Step 3.F, Update temperature and characteristic value.
  228. static int32_t sensor_value = 0;
  229. // sd_temp_get(&sensor_value); // *modify where sensor measurement function goes
  230. // our_sensor_characteristic_update(&m_our_service, &sensor_value); // make a call to characteristic update function
  231. // nrf_gpio_pin_toggle(LED_4);
  232. //printf("%d\r\n", sensor_value++);
  233. //SendData();
  234. gTimeCounter++;
  235. SystemTimer.MS_1++;
  236. SystemTimer.UART_LAST_RECV_TIMER++;
  237. SystemTimer.SEND_TEST_TIMER++;
  238. SystemTimer.LED_TOGGLE_TIMER++;
  239. SystemTimer.TMR_CON_START++;
  240. SystemTimer.PARK_KEEP_TIMER++;
  241. SystemTimer.DEV_REG_TIMER++;
  242. SystemTimer.SVR_SEND_TIMER++;
  243. SystemManager.LedBlinkTimer--;
  244. if(!(SystemTimer.MS_1 % 10)){
  245. SystemTimer.MS_10_TICK = 1;
  246. }
  247. if(!(SystemTimer.MS_1 % 100)){
  248. SystemTimer.MS_100_TICK = 1;
  249. }
  250. if(!(SystemTimer.MS_1 % 1000)){
  251. SystemTimer.MS_1000_TICK = 1;
  252. }
  253. if( SystemTimer.TMR_CON_START == 10000 )
  254. {
  255. sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_LOCAL_HOST_TERMINATED_CONNECTION);
  256. }
  257. }
  258. /**@brief Function for starting timers.
  259. */
  260. static void application_timers_start(void)
  261. {
  262. /* YOUR_JOB: Start your timers. below is an example of how to start a timer.
  263. ret_code_t err_code;
  264. err_code = app_timer_start(m_app_timer_id, TIMER_INTERVAL, NULL);
  265. APP_ERROR_CHECK(err_code); */
  266. app_timer_start(m_our_char_timer_id, OUR_CHAR_TIMER_INTERVAL, NULL);
  267. }
  268. /**@brief Function for handling asserts in the SoftDevice.
  269. *
  270. * @details This function is called in case of an assert in the SoftDevice.
  271. *
  272. * @warning This handler is only an example and is not meant for the final product. You need to analyze
  273. * how your product is supposed to react in case of assert.
  274. * @warning On assert from the SoftDevice, the system can only recover on reset.
  275. *
  276. * @param[in] line_num Line number of the failing assert call.
  277. * @param[in] p_file_name File name of the failing assert call.
  278. */
  279. void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name)
  280. {
  281. app_error_handler(0xDEADBEEF, line_num, p_file_name);
  282. }
  283. /**@brief Function for handling the Nordic UART Service Client errors.
  284. *
  285. * @param[in] nrf_error Error code containing information about what went wrong.
  286. */
  287. static void nus_error_handler(uint32_t nrf_error)
  288. {
  289. APP_ERROR_HANDLER(nrf_error);
  290. }
  291. /**@brief Function to start scanning. */
  292. static void scan_start(void)
  293. {
  294. ret_code_t ret;
  295. ret = nrf_ble_scan_start(&m_scan);
  296. APP_ERROR_CHECK(ret);
  297. ret = bsp_indication_set(BSP_INDICATE_SCANNING);
  298. APP_ERROR_CHECK(ret);
  299. }
  300. /**@brief Function for handling Scanning Module events.
  301. */
  302. static void scan_evt_handler(scan_evt_t const * p_scan_evt)
  303. {
  304. ret_code_t err_code;
  305. switch(p_scan_evt->scan_evt_id)
  306. {
  307. case NRF_BLE_SCAN_EVT_CONNECTING_ERROR:
  308. {
  309. err_code = p_scan_evt->params.connecting_err.err_code;
  310. APP_ERROR_CHECK(err_code);
  311. } break;
  312. case NRF_BLE_SCAN_EVT_CONNECTED:
  313. {
  314. ble_gap_evt_connected_t const * p_connected =
  315. p_scan_evt->params.connected.p_connected;
  316. // Scan is automatically stopped by the connection.
  317. NRF_LOG_INFO("Connecting to target %02x%02x%02x%02x%02x%02x",
  318. p_connected->peer_addr.addr[0],
  319. p_connected->peer_addr.addr[1],
  320. p_connected->peer_addr.addr[2],
  321. p_connected->peer_addr.addr[3],
  322. p_connected->peer_addr.addr[4],
  323. p_connected->peer_addr.addr[5]
  324. );
  325. } break;
  326. case NRF_BLE_SCAN_EVT_SCAN_TIMEOUT:
  327. {
  328. NRF_LOG_INFO("Scan timed out.");
  329. scan_start();
  330. } break;
  331. default:
  332. break;
  333. }
  334. }
  335. /**@brief Function for initializing the scanning and setting the filters.
  336. */
  337. static void scan_init(void)
  338. {
  339. ret_code_t err_code;
  340. nrf_ble_scan_init_t init_scan;
  341. memset(&init_scan, 0, sizeof(init_scan));
  342. init_scan.connect_if_match = true;
  343. init_scan.conn_cfg_tag = APP_BLE_CONN_CFG_TAG;
  344. err_code = nrf_ble_scan_init(&m_scan, &init_scan, scan_evt_handler);
  345. APP_ERROR_CHECK(err_code);
  346. #if 0
  347. err_code = nrf_ble_scan_filter_set(&m_scan, SCAN_ADDR_FILTER, my_addr);
  348. APP_ERROR_CHECK(err_code);
  349. err_code = nrf_ble_scan_filter_set(&m_scan, SCAN_ADDR_FILTER, my_addr_1);
  350. APP_ERROR_CHECK(err_code);
  351. err_code = nrf_ble_scan_filters_enable(&m_scan, NRF_BLE_SCAN_ADDR_FILTER, false);
  352. APP_ERROR_CHECK(err_code);
  353. #endif
  354. #if 1
  355. err_code = nrf_ble_scan_filter_set(&m_scan, SCAN_UUID_FILTER, &m_nus_uuid);
  356. APP_ERROR_CHECK(err_code);
  357. err_code = nrf_ble_scan_filters_enable(&m_scan, NRF_BLE_SCAN_UUID_FILTER, false);
  358. APP_ERROR_CHECK(err_code);
  359. #endif
  360. }
  361. /**@brief Function for handling database discovery events.
  362. *
  363. * @details This function is a callback function to handle events from the database discovery module.
  364. * Depending on the UUIDs that are discovered, this function forwards the events
  365. * to their respective services.
  366. *
  367. * @param[in] p_event Pointer to the database discovery event.
  368. */
  369. static void db_disc_handler(ble_db_discovery_evt_t * p_evt)
  370. {
  371. ble_nus_c_on_db_disc_evt(&m_ble_nus_c, p_evt);
  372. }
  373. /**@brief Function for handling characters received by the Nordic UART Service (NUS).
  374. *
  375. * @details This function takes a list of characters of length data_len and prints the characters out on UART.
  376. * If @ref ECHOBACK_BLE_UART_DATA is set, the data is sent back to sender.
  377. */
  378. static void ble_nus_chars_received_uart_print(uint8_t * p_data, uint16_t data_len)
  379. {
  380. ret_code_t ret_val;
  381. NRF_LOG_DEBUG("Receiving data.");
  382. NRF_LOG_INFO("Receiving data.");
  383. NRF_LOG_RAW_INFO("Receiving data.");
  384. NRF_LOG_HEXDUMP_DEBUG(p_data, data_len);
  385. for (uint32_t i = 0; i < data_len; i++)
  386. {
  387. do
  388. {
  389. ret_val = app_uart_put(p_data[i]);
  390. if ((ret_val != NRF_SUCCESS) && (ret_val != NRF_ERROR_BUSY))
  391. {
  392. NRF_LOG_ERROR("app_uart_put failed for index 0x%04x.", i);
  393. APP_ERROR_CHECK(ret_val);
  394. }
  395. } while (ret_val == NRF_ERROR_BUSY);
  396. }
  397. if (p_data[data_len-1] == '\r')
  398. {
  399. while (app_uart_put('\n') == NRF_ERROR_BUSY);
  400. }
  401. if (ECHOBACK_BLE_UART_DATA)
  402. {
  403. // Send data back to the peripheral.
  404. do
  405. {
  406. ret_val = ble_nus_c_string_send(&m_ble_nus_c, p_data, data_len);
  407. if ((ret_val != NRF_SUCCESS) && (ret_val != NRF_ERROR_BUSY))
  408. {
  409. NRF_LOG_ERROR("Failed sending NUS message. Error 0x%x. ", ret_val);
  410. APP_ERROR_CHECK(ret_val);
  411. }
  412. } while (ret_val == NRF_ERROR_BUSY);
  413. }
  414. }
  415. void uart_event_handle(app_uart_evt_t * p_event)
  416. {
  417. static uint8_t data_array[BLE_NUS_MAX_DATA_LEN];
  418. static uint16_t index = 0;
  419. uint32_t ret_val;
  420. switch (p_event->evt_type)
  421. {
  422. /**@snippet [Handling data from UART] */
  423. case APP_UART_DATA_READY:
  424. // SystemTimer.UART1_LAST_RECV_TIMER = 0;
  425. USART_Handler();
  426. break;
  427. case APP_UART_DATA:
  428. NRF_LOG_INFO("APP_UART_DATA");
  429. break;
  430. /**@snippet [Handling data from UART] */
  431. case APP_UART_COMMUNICATION_ERROR:
  432. NRF_LOG_ERROR("Communication error occurred while handling UART.");
  433. APP_ERROR_HANDLER(p_event->data.error_communication);
  434. break;
  435. case APP_UART_FIFO_ERROR:
  436. NRF_LOG_ERROR("Error occurred in FIFO module used by UART.");
  437. APP_ERROR_HANDLER(p_event->data.error_code);
  438. break;
  439. default:
  440. break;
  441. }
  442. }
  443. /**@brief Callback handling Nordic UART Service (NUS) client events.
  444. *
  445. * @details This function is called to notify the application of NUS client events.
  446. *
  447. * @param[in] p_ble_nus_c NUS client handle. This identifies the NUS client.
  448. * @param[in] p_ble_nus_evt Pointer to the NUS client event.
  449. */
  450. /**@snippet [Handling events from the ble_nus_c module] */
  451. //char tmpData11[] = {0x60, 0x2C, 0x4E, 0x2D, 0x74, 0xB3, 0xAB, 0xF8, 0xE5, 0x28, 0xB4, 0x41, 0x3D, 0x52, 0x66, 0xC4};
  452. static void ble_nus_c_evt_handler(ble_nus_c_t * p_ble_nus_c, ble_nus_c_evt_t const * p_ble_nus_evt)
  453. {
  454. ret_code_t err_code;
  455. int i;
  456. switch (p_ble_nus_evt->evt_type)
  457. {
  458. case BLE_NUS_C_EVT_DISCOVERY_COMPLETE: // Connecting
  459. SystemManager.SecondData = 0;
  460. NRF_LOG_INFO("Discovery complete.");
  461. err_code = ble_nus_c_handles_assign(p_ble_nus_c, p_ble_nus_evt->conn_handle, &p_ble_nus_evt->handles);
  462. APP_ERROR_CHECK(err_code);
  463. err_code = ble_nus_c_tx_notif_enable(p_ble_nus_c);
  464. APP_ERROR_CHECK(err_code);
  465. NRF_LOG_INFO("Connected to device with Nordic UART Service.");
  466. switch(SystemManager.Encryption_Mode){
  467. case AES_ENC_WES:
  468. // CarEncryptEcb( AES_ENC_WES );
  469. Wes_Encryp_Ecb();
  470. ble_nus_c_string_send(&m_ble_nus_c, SystemManager.AesEncData, 16);
  471. break;
  472. case AES_ENC_CAR:
  473. CarEncryptEcb( AES_ENC_CAR );
  474. ble_nus_c_string_send(&m_ble_nus_c, SystemManager.AesEncData, 16);
  475. break;
  476. case AES_ENC_EMG:
  477. CarEncryptEcb( AES_ENC_EMG );
  478. ble_nus_c_string_send(&m_ble_nus_c, SystemManager.AesEncData, 16);
  479. break;
  480. case AES_ENC_PCA:
  481. CarEncryptEcb( AES_ENC_PCA );
  482. ble_nus_c_string_send(&m_ble_nus_c, SystemManager.AesEncData, 16); // PCAXX 전송
  483. break;
  484. }
  485. break;
  486. case BLE_NUS_C_EVT_NUS_TX_EVT: // BLE NUS Data Rx
  487. //ble_nus_chars_received_uart_print(p_ble_nus_evt->p_data, p_ble_nus_evt->data_len);
  488. //printf("Connected to device with Nordic UART Service. Len:%d\r\n", p_ble_nus_evt->data_len);
  489. #if 0
  490. for( i=0; i<p_ble_nus_evt->data_len; i++)
  491. {
  492. //NRF_LOG_RAW_INFO("%02x-", p_ble_nus_evt->p_data[i]);
  493. }
  494. #endif
  495. NRF_LOG_RAW_INFO("Type %x\n", p_ble_nus_evt->p_data[0]);
  496. if(SystemManager.SecondData == 0){
  497. switch(p_ble_nus_evt->p_data[0]){
  498. case 0x74: // 무선 비상벨 신호
  499. memcpy( SystemManager.TmpBuff, p_ble_nus_evt->p_data, p_ble_nus_evt->data_len );
  500. CarDecryptEcb( &SystemManager.TmpBuff[1], &SystemManager.AesEncData[0] );
  501. NRF_LOG_RAW_INFO("WES");
  502. for( i=0; i<16; i++)
  503. {
  504. NRF_LOG_RAW_INFO("%02x ", SystemManager.AesEncData[i]);
  505. }
  506. memcpy( &(p_ble_nus_evt->p_data[1]), &SystemManager.AesEncData[0], 16 );
  507. switch(p_ble_nus_evt->p_data[12]){
  508. // 비상벨 버튼 동작시
  509. case DEV_NUS_EMG:
  510. NRF_LOG_INFO("TRANSFER SWITCH --- Emergency");
  511. SystemManager.BatLevel = p_ble_nus_evt->p_data[13];
  512. SystemManager.TransferVerHigh = p_ble_nus_evt->p_data[14];
  513. SystemManager.TransferVerLow = p_ble_nus_evt->p_data[15];
  514. switch(SystemManager.System_State){
  515. case SYSTEM_EMERGENCY_SIREN:
  516. case SYSTEM_SERVER_COMM:
  517. case SYSTEM_SERVER_COMM_REQ:
  518. break;
  519. case SYSTEM_REGISTER: // 등록 모드일 경우
  520. if( FindRegMac(ScanHSBuff) == 1 )
  521. {
  522. SystemManager.RegRequst = 0;
  523. SystemManager.LedBlinkRun = 0;
  524. SystemManager.System_State = SYSTEM_NONE;
  525. ble_nus_c_string_send(&m_ble_nus_c, "WESACK", 6);
  526. NRF_LOG_INFO("Device Registration Disable");
  527. SystemManager.SwitchOn = 0;
  528. PKBuzzerOff();
  529. PKLedOff();
  530. err_code = sd_ble_gap_disconnect(p_ble_nus_c->conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  531. APP_ERROR_CHECK(err_code);
  532. }
  533. break;
  534. case SYSTEM_NONE:
  535. SystemManager.LedBlinkRun = 1;
  536. SystemManager.LedBlinkTimer = 5000;
  537. SystemTimer.LED_TOGGLE_TIMER = 0;
  538. SystemManager.DevType = 0;
  539. SendEmergency();
  540. err_code = sd_ble_gap_disconnect(p_ble_nus_c->conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  541. APP_ERROR_CHECK(err_code);
  542. break;
  543. }
  544. SystemManager.DevType = 0;
  545. break;
  546. // 테스트 버튼 동작시
  547. case DEV_NUS_TEST:
  548. NRF_LOG_INFO("TRANSFER SWITCH --- TEST");
  549. SystemManager.BatLevel = p_ble_nus_evt->p_data[13];
  550. SystemManager.TransferVerHigh = p_ble_nus_evt->p_data[14];
  551. SystemManager.TransferVerLow = p_ble_nus_evt->p_data[15];
  552. switch(SystemManager.System_State){
  553. case SYSTEM_EMERGENCY_SIREN:
  554. case SYSTEM_SERVER_COMM:
  555. case SYSTEM_SERVER_COMM_REQ:
  556. break;
  557. case SYSTEM_REGISTER:
  558. if( FindRegMac(ScanHSBuff) == 1 )
  559. {
  560. SystemManager.RegRequst = 0;
  561. SystemManager.LedBlinkRun = 0;
  562. SystemManager.System_State = SYSTEM_NONE;
  563. ble_nus_c_string_send(&m_ble_nus_c, "WESACK", 6);
  564. NRF_LOG_INFO("Device Registration Disable");
  565. SystemManager.SwitchOn = 0;
  566. PKBuzzerOff();
  567. PKLedOff();
  568. }
  569. err_code = sd_ble_gap_disconnect(p_ble_nus_c->conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  570. APP_ERROR_CHECK(err_code);
  571. break;
  572. case SYSTEM_NONE:
  573. AliveTest();
  574. err_code = sd_ble_gap_disconnect(p_ble_nus_c->conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  575. APP_ERROR_CHECK(err_code);
  576. break;
  577. }
  578. SystemManager.DevType = 0;
  579. break;
  580. // 등록버튼 동작시
  581. case DEV_NUS_REG:
  582. NRF_LOG_INFO("TRANSFER SWITCH --- Device Registration");
  583. SystemTimer.DEV_REG_TIMER = 0;
  584. SystemManager.BatLevel = p_ble_nus_evt->p_data[13];
  585. SystemManager.TransferVerHigh = p_ble_nus_evt->p_data[14];
  586. SystemManager.TransferVerLow = p_ble_nus_evt->p_data[15];
  587. if(SystemManager.RegRequst) // 현재 등록모드일 경우
  588. {
  589. SystemManager.LedBlinkRun = COM_TYPE_SVR_RECV_REG_ANSWER;
  590. SystemManager.LedBlinkTimer = 2000;
  591. SystemTimer.LED_TOGGLE_TIMER = 0;
  592. for( i=0; i<6; i++)
  593. {
  594. NRF_LOG_INFO("0x%02x", SystemManager.PeerAddr[i]);
  595. }
  596. NRF_LOG_RAW_INFO("Reg Mac=>%s\n", SystemManager.PtrPeerAddrStr);
  597. NRF_LOG_RAW_INFO("\n");
  598. SaveRegMac(SystemManager.PtrPeerAddrStr);
  599. ble_nus_c_string_send(&m_ble_nus_c, "WESACK", 6);
  600. NRF_LOG_INFO("Send WESACK");
  601. SendCurrentRegDev();
  602. }else{
  603. ;
  604. }
  605. SystemManager.DevType = 0;
  606. break;
  607. // Alive 동작시
  608. case DEV_NUS_ALIVE:
  609. NRF_LOG_INFO("TRANSFER SWITCH --- Alive");
  610. SystemManager.BatLevel = p_ble_nus_evt->p_data[13];
  611. SystemManager.TransferVerHigh = p_ble_nus_evt->p_data[14];
  612. SystemManager.TransferVerLow = p_ble_nus_evt->p_data[15];
  613. SendAlive();
  614. err_code = sd_ble_gap_disconnect(p_ble_nus_c->conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  615. APP_ERROR_CHECK(err_code);
  616. SystemManager.DevType = 0;
  617. break;
  618. }
  619. break;
  620. case 0x73: // 밴드 주차
  621. NRF_LOG_RAW_INFO("Band Parking %d\n", p_ble_nus_evt->data_len);
  622. SystemManager.SecondData = 1;
  623. SystemManager.BandType = 0x73;
  624. memcpy( SystemManager.TmpBuff, p_ble_nus_evt->p_data, p_ble_nus_evt->data_len );
  625. CarDecryptEcb( &SystemManager.TmpBuff[1], SystemManager.AesEncData );
  626. NRF_LOG_RAW_INFO("Nus First Data ==>");
  627. for( i=0; i<16; i++)
  628. {
  629. NRF_LOG_RAW_INFO("%02x ", SystemManager.AesEncData[i]);
  630. }
  631. NRF_LOG_RAW_INFO("\n");
  632. SystemManager.Site[0] = SystemManager.AesEncData[4];
  633. SystemManager.Site[1] = SystemManager.AesEncData[5];
  634. SystemManager.Site[2] = SystemManager.AesEncData[6];
  635. SystemManager.Site[3] = SystemManager.AesEncData[7];
  636. SystemManager.Dong[0] = SystemManager.AesEncData[8];
  637. SystemManager.Dong[1] = SystemManager.AesEncData[9];
  638. SystemManager.Ho[0] = SystemManager.AesEncData[10];
  639. SystemManager.Ho[1] = SystemManager.AesEncData[11];
  640. SystemManager.Key_Num = SystemManager.AesEncData[12];
  641. SystemManager.Key_Type = SystemManager.AesEncData[13];
  642. SystemManager.Random_Out[0] = SystemManager.AesEncData[14];
  643. SystemManager.Random_Out[1] = SystemManager.AesEncData[15];
  644. break;
  645. case 0x72: // 밴드 비상
  646. NRF_LOG_RAW_INFO("Band Alarm %d\n", p_ble_nus_evt->data_len);
  647. SystemManager.SecondData = 1;
  648. SystemManager.BandType = 0x72;
  649. memcpy( SystemManager.TmpBuff, p_ble_nus_evt->p_data, p_ble_nus_evt->data_len );
  650. CarDecryptEcb( &SystemManager.TmpBuff[1], SystemManager.AesEncData );
  651. NRF_LOG_RAW_INFO("Nus First Data ==>");
  652. for( i=0; i<16; i++)
  653. {
  654. NRF_LOG_RAW_INFO("%02x ", SystemManager.AesEncData[i]);
  655. }
  656. NRF_LOG_RAW_INFO("\n");
  657. SystemManager.Site[0] = SystemManager.AesEncData[4];
  658. SystemManager.Site[1] = SystemManager.AesEncData[5];
  659. SystemManager.Site[2] = SystemManager.AesEncData[6];
  660. SystemManager.Site[3] = SystemManager.AesEncData[7];
  661. SystemManager.Dong[0] = SystemManager.AesEncData[8];
  662. SystemManager.Dong[1] = SystemManager.AesEncData[9];
  663. SystemManager.Ho[0] = SystemManager.AesEncData[10];
  664. SystemManager.Ho[1] = SystemManager.AesEncData[11];
  665. SystemManager.Key_Num = SystemManager.AesEncData[12];
  666. SystemManager.Key_Type = SystemManager.AesEncData[13];
  667. SystemManager.Random_Out[0] = SystemManager.AesEncData[14];
  668. SystemManager.Random_Out[1] = SystemManager.AesEncData[15];
  669. break;
  670. case 0x75: // 신규 원패스앱
  671. NRF_LOG_RAW_INFO("One Pass App %d\n", p_ble_nus_evt->data_len);
  672. SystemManager.SecondData = 1;
  673. SystemManager.BandType = 0x75;
  674. memcpy( SystemManager.TmpBuff, p_ble_nus_evt->p_data, p_ble_nus_evt->data_len );
  675. CarDecryptEcb( &SystemManager.TmpBuff[1], SystemManager.AesEncData );
  676. NRF_LOG_RAW_INFO("Nus First Data ==>");
  677. for( i=0; i<16; i++)
  678. {
  679. NRF_LOG_RAW_INFO("%02x ", SystemManager.AesEncData[i]);
  680. }
  681. NRF_LOG_RAW_INFO("\n");
  682. SystemManager.Site[0] = SystemManager.AesEncData[4];
  683. SystemManager.Site[1] = SystemManager.AesEncData[5];
  684. SystemManager.Site[2] = SystemManager.AesEncData[6];
  685. SystemManager.Site[3] = SystemManager.AesEncData[7];
  686. SystemManager.Dong[0] = SystemManager.AesEncData[8];
  687. SystemManager.Dong[1] = SystemManager.AesEncData[9];
  688. SystemManager.Ho[0] = SystemManager.AesEncData[10];
  689. SystemManager.Ho[1] = SystemManager.AesEncData[11];
  690. SystemManager.Key_Num = SystemManager.AesEncData[12];
  691. SystemManager.Key_Type = SystemManager.AesEncData[13];
  692. SystemManager.Random_Out[0] = SystemManager.AesEncData[14];
  693. SystemManager.Random_Out[1] = SystemManager.AesEncData[15];
  694. break;
  695. }
  696. }else if( SystemManager.SecondData == 1 ){ // 두번째 Nus Packet
  697. SystemManager.SecondData = 0;
  698. // for( i=0; i<p_ble_nus_evt->data_len; i++)
  699. // {
  700. // NRF_LOG_RAW_INFO("%02x ", p_ble_nus_evt->p_data[i]);
  701. // }
  702. memcpy( SystemManager.TmpBuff, p_ble_nus_evt->p_data, p_ble_nus_evt->data_len );
  703. #if 0
  704. NRF_LOG_RAW_INFO("======== SystemManager.TmpBuff\n");
  705. for( i=0; i<p_ble_nus_evt->data_len; i++)
  706. {
  707. NRF_LOG_RAW_INFO("%02x ",SystemManager.TmpBuff[i]);
  708. }
  709. NRF_LOG_RAW_INFO("\n");
  710. #endif
  711. CarDecryptEcb( &SystemManager.TmpBuff[0], SystemManager.AesEncData );
  712. NRF_LOG_RAW_INFO("Nus Secound Data ===>");
  713. for( i=0; i<16; i++)
  714. {
  715. NRF_LOG_RAW_INFO("%02x ", SystemManager.AesEncData[i]);
  716. }
  717. NRF_LOG_RAW_INFO("\n");
  718. switch(SystemManager.BandType){
  719. case 0x73: // BAND PARKING
  720. if( SystemManager.ServerCon == 0)
  721. {
  722. CarEncryptEcbACK(SystemManager.BandType);
  723. ble_nus_c_string_send(&m_ble_nus_c, SystemManager.AesEncData, 16);
  724. SystemManager.Encryption_Mode = AES_ENC_NONE;
  725. SendParkingBand();
  726. // jakuja disconnect
  727. err_code = sd_ble_gap_disconnect(p_ble_nus_c->conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  728. APP_ERROR_CHECK(err_code);
  729. }
  730. break;
  731. case 0x72: // BAND EMG
  732. if( SystemManager.ServerCon == 0)
  733. {
  734. CarEncryptEcbACK(SystemManager.BandType);
  735. ble_nus_c_string_send(&m_ble_nus_c, SystemManager.AesEncData, 16);
  736. switch(SystemManager.System_State){
  737. case SYSTEM_NONE:
  738. SendEmergencyBand();
  739. break;
  740. case SYSTEM_REGISTER:
  741. case SYSTEM_EMERGENCY_SIREN:
  742. case SYSTEM_SERVER_COMM:
  743. case SYSTEM_SERVER_COMM_REQ:
  744. break;
  745. }
  746. err_code = sd_ble_gap_disconnect(p_ble_nus_c->conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  747. APP_ERROR_CHECK(err_code);
  748. SystemManager.Encryption_Mode = AES_ENC_NONE;
  749. }
  750. break;
  751. case 0x75: // New iOS App
  752. if( SystemManager.ServerCon == 0)
  753. {
  754. PcaEncryptEcbACK(SystemManager.BandType);
  755. ble_nus_c_string_send(&m_ble_nus_c, SystemManager.AesEncData, 16);
  756. SystemManager.DevType = 0;
  757. SendParkingApp();
  758. err_code = sd_ble_gap_disconnect(p_ble_nus_c->conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  759. APP_ERROR_CHECK(err_code);
  760. NRF_LOG_RAW_INFO("======== Send CARACK\n");
  761. }
  762. break;
  763. }
  764. }
  765. break;
  766. case BLE_NUS_C_EVT_DISCONNECTED:
  767. NRF_LOG_INFO("Disconnected --------------------\n");
  768. scan_start();
  769. break;
  770. }
  771. }
  772. /**@snippet [Handling events from the ble_nus_c module] */
  773. /**
  774. * @brief Function for handling shutdown events.
  775. *
  776. * @param[in] event Shutdown type.
  777. */
  778. static bool shutdown_handler(nrf_pwr_mgmt_evt_t event)
  779. {
  780. ret_code_t err_code;
  781. err_code = bsp_indication_set(BSP_INDICATE_IDLE);
  782. APP_ERROR_CHECK(err_code);
  783. switch (event)
  784. {
  785. case NRF_PWR_MGMT_EVT_PREPARE_WAKEUP:
  786. // Prepare wakeup buttons.
  787. err_code = bsp_btn_ble_sleep_mode_prepare();
  788. APP_ERROR_CHECK(err_code);
  789. break;
  790. default:
  791. break;
  792. }
  793. return true;
  794. }
  795. NRF_PWR_MGMT_HANDLER_REGISTER(shutdown_handler, APP_SHUTDOWN_HANDLER_PRIORITY);
  796. /**@brief Function for handling BLE events.
  797. *
  798. * @param[in] p_ble_evt Bluetooth stack event.
  799. * @param[in] p_context Unused.
  800. */
  801. static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context)
  802. {
  803. int i;
  804. ret_code_t err_code;
  805. ble_gap_evt_t const * p_gap_evt = &p_ble_evt->evt.gap_evt;
  806. switch (p_ble_evt->header.evt_id)
  807. {
  808. case BLE_GAP_EVT_ADV_REPORT :
  809. //NRF_LOG_INFO("BLE_GAP_EVT_ADV_REPORT : %d", &p_gap_evt->params.adv_report.data.len);
  810. //NRF_LOG_INFO(&p_gap_evt->params.adv_report);
  811. break;
  812. case BLE_GAP_EVT_SCAN_REQ_REPORT:
  813. NRF_LOG_INFO("BLE_GAP_EVT_SCAN_REQ_REPORT");
  814. break;
  815. case BLE_GAP_EVT_CONNECTED:
  816. NRF_LOG_INFO("BLE_GAP_EVT_CONNECTED");
  817. err_code = ble_nus_c_handles_assign(&m_ble_nus_c, p_ble_evt->evt.gap_evt.conn_handle, NULL);
  818. APP_ERROR_CHECK(err_code);
  819. err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
  820. APP_ERROR_CHECK(err_code);
  821. // start discovery of services. The NUS Client waits for a discovery result
  822. err_code = ble_db_discovery_start(&m_db_disc, p_ble_evt->evt.gap_evt.conn_handle);
  823. APP_ERROR_CHECK(err_code);
  824. break;
  825. case BLE_GAP_EVT_DISCONNECTED:
  826. NRF_LOG_INFO("Disconnected. conn_handle: 0x%x, reason: 0x%x",
  827. p_gap_evt->conn_handle,
  828. p_gap_evt->params.disconnected.reason);
  829. #if 0
  830. if( SystemManager.DevType == DEV_IOS_PARK && p_gap_evt->params.disconnected.reason != 0x16 )
  831. {
  832. NVIC_SystemReset();
  833. //nrf_delay_ms(100);
  834. //UNUSED_RETURN_VALUE(sd_ble_gap_scan_start(NULL, &p_scan_ctx->scan_buffer));
  835. }
  836. #endif
  837. break;
  838. case BLE_GAP_EVT_TIMEOUT:
  839. if (p_gap_evt->params.timeout.src == BLE_GAP_TIMEOUT_SRC_CONN)
  840. {
  841. NRF_LOG_INFO("Connection Request timed out.");
  842. }
  843. break;
  844. case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
  845. // Pairing not supported.
  846. err_code = sd_ble_gap_sec_params_reply(p_ble_evt->evt.gap_evt.conn_handle, BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP, NULL, NULL);
  847. APP_ERROR_CHECK(err_code);
  848. break;
  849. case BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST:
  850. // Accepting parameters requested by peer.
  851. err_code = sd_ble_gap_conn_param_update(p_gap_evt->conn_handle,
  852. &p_gap_evt->params.conn_param_update_request.conn_params);
  853. APP_ERROR_CHECK(err_code);
  854. break;
  855. case BLE_GAP_EVT_PHY_UPDATE_REQUEST:
  856. {
  857. NRF_LOG_DEBUG("PHY update request.");
  858. ble_gap_phys_t const phys =
  859. {
  860. .rx_phys = BLE_GAP_PHY_AUTO,
  861. .tx_phys = BLE_GAP_PHY_AUTO,
  862. };
  863. err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys);
  864. APP_ERROR_CHECK(err_code);
  865. } break;
  866. case BLE_GATTC_EVT_TIMEOUT:
  867. // Disconnect on GATT Client timeout event.
  868. NRF_LOG_DEBUG("GATT Client Timeout.");
  869. err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle,
  870. BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  871. APP_ERROR_CHECK(err_code);
  872. break;
  873. case BLE_GATTS_EVT_TIMEOUT:
  874. // Disconnect on GATT Server timeout event.
  875. NRF_LOG_DEBUG("GATT Server Timeout.");
  876. err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle,
  877. BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  878. APP_ERROR_CHECK(err_code);
  879. break;
  880. default:
  881. break;
  882. }
  883. }
  884. /**@brief Function for initializing the BLE stack.
  885. *
  886. * @details Initializes the SoftDevice and the BLE event interrupt.
  887. */
  888. static void ble_stack_init(void)
  889. {
  890. ret_code_t err_code;
  891. err_code = nrf_sdh_enable_request();
  892. APP_ERROR_CHECK(err_code);
  893. // Configure the BLE stack using the default settings.
  894. // Fetch the start address of the application RAM.
  895. uint32_t ram_start = 0;
  896. err_code = nrf_sdh_ble_default_cfg_set(APP_BLE_CONN_CFG_TAG, &ram_start);
  897. APP_ERROR_CHECK(err_code);
  898. // Enable BLE stack.
  899. err_code = nrf_sdh_ble_enable(&ram_start);
  900. APP_ERROR_CHECK(err_code);
  901. // Register a handler for BLE events.
  902. NRF_SDH_BLE_OBSERVER(m_ble_observer, APP_BLE_OBSERVER_PRIO, ble_evt_handler, NULL);
  903. }
  904. /**@brief Function for handling events from the GATT library. */
  905. void gatt_evt_handler(nrf_ble_gatt_t * p_gatt, nrf_ble_gatt_evt_t const * p_evt)
  906. {
  907. if (p_evt->evt_id == NRF_BLE_GATT_EVT_ATT_MTU_UPDATED)
  908. {
  909. NRF_LOG_INFO("ATT MTU exchange completed.");
  910. m_ble_nus_max_data_len = p_evt->params.att_mtu_effective - OPCODE_LENGTH - HANDLE_LENGTH;
  911. //m_ble_nus_max_data_len = 244;
  912. NRF_LOG_INFO("Ble NUS max data length set to 0x%X(%d)", m_ble_nus_max_data_len, m_ble_nus_max_data_len);
  913. }
  914. }
  915. /**@brief Function for initializing the GATT library. */
  916. void gatt_init(void)
  917. {
  918. ret_code_t err_code;
  919. err_code = nrf_ble_gatt_init(&m_gatt, gatt_evt_handler);
  920. APP_ERROR_CHECK(err_code);
  921. err_code = nrf_ble_gatt_att_mtu_central_set(&m_gatt, NRF_SDH_BLE_GATT_MAX_MTU_SIZE);
  922. APP_ERROR_CHECK(err_code);
  923. }
  924. /**@brief Function for handling events from the BSP module.
  925. *
  926. * @param[in] event Event generated by button press.
  927. */
  928. void bsp_event_handler(bsp_event_t event)
  929. {
  930. ret_code_t err_code;
  931. switch (event)
  932. {
  933. case BSP_EVENT_SLEEP:
  934. nrf_pwr_mgmt_shutdown(NRF_PWR_MGMT_SHUTDOWN_GOTO_SYSOFF);
  935. break;
  936. case BSP_EVENT_DISCONNECT:
  937. err_code = sd_ble_gap_disconnect(m_ble_nus_c.conn_handle,
  938. BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
  939. if (err_code != NRF_ERROR_INVALID_STATE)
  940. {
  941. APP_ERROR_CHECK(err_code);
  942. }
  943. break;
  944. default:
  945. break;
  946. }
  947. }
  948. /**@brief Function for initializing the UART. */
  949. static void uart_init(void)
  950. {
  951. ret_code_t err_code;
  952. app_uart_comm_params_t const comm_params =
  953. {
  954. .rx_pin_no = RX_PIN_NUMBER,
  955. .tx_pin_no = TX_PIN_NUMBER,
  956. .rts_pin_no = RTS_PIN_NUMBER,
  957. .cts_pin_no = CTS_PIN_NUMBER,
  958. .flow_control = APP_UART_FLOW_CONTROL_DISABLED,
  959. .use_parity = false,
  960. .baud_rate = UART_BAUDRATE_BAUDRATE_Baud9600
  961. };
  962. APP_UART_FIFO_INIT(&comm_params,
  963. UART_RX_BUF_SIZE,
  964. UART_TX_BUF_SIZE,
  965. uart_event_handle,
  966. APP_IRQ_PRIORITY_LOWEST,
  967. err_code);
  968. APP_ERROR_CHECK(err_code);
  969. }
  970. /**@brief Function for initializing the Nordic UART Service (NUS) client. */
  971. static void nus_c_init(void)
  972. {
  973. ret_code_t err_code;
  974. ble_nus_c_init_t init;
  975. init.evt_handler = ble_nus_c_evt_handler;
  976. init.error_handler = nus_error_handler;
  977. init.p_gatt_queue = &m_ble_gatt_queue;
  978. err_code = ble_nus_c_init(&m_ble_nus_c, &init);
  979. APP_ERROR_CHECK(err_code);
  980. }
  981. /**@brief Function for initializing buttons and leds. */
  982. static void buttons_leds_init(void)
  983. {
  984. ret_code_t err_code;
  985. bsp_event_t startup_event;
  986. err_code = bsp_init(BSP_INIT_LEDS, bsp_event_handler);
  987. APP_ERROR_CHECK(err_code);
  988. err_code = bsp_btn_ble_init(NULL, &startup_event);
  989. APP_ERROR_CHECK(err_code);
  990. }
  991. /**@brief Function for initializing the timer. */
  992. static void timer_init(void)
  993. {
  994. ret_code_t err_code = app_timer_init();
  995. APP_ERROR_CHECK(err_code);
  996. app_timer_create(&m_our_char_timer_id, APP_TIMER_MODE_REPEATED, timer_timeout_handler);
  997. }
  998. /**@brief Function for initializing the nrf log module. */
  999. static void log_init(void)
  1000. {
  1001. ret_code_t err_code = NRF_LOG_INIT(NULL);
  1002. APP_ERROR_CHECK(err_code);
  1003. NRF_LOG_DEFAULT_BACKENDS_INIT();
  1004. }
  1005. /**@brief Function for initializing power management.
  1006. */
  1007. static void power_management_init(void)
  1008. {
  1009. ret_code_t err_code;
  1010. err_code = nrf_pwr_mgmt_init();
  1011. APP_ERROR_CHECK(err_code);
  1012. }
  1013. /** @brief Function for initializing the database discovery module. */
  1014. static void db_discovery_init(void)
  1015. {
  1016. ble_db_discovery_init_t db_init;
  1017. memset(&db_init, 0, sizeof(ble_db_discovery_init_t));
  1018. db_init.evt_handler = db_disc_handler;
  1019. db_init.p_gatt_queue = &m_ble_gatt_queue;
  1020. ret_code_t err_code = ble_db_discovery_init(&db_init);
  1021. APP_ERROR_CHECK(err_code);
  1022. }
  1023. /**@brief Function for handling the idle state (main loop).
  1024. *
  1025. * @details Handles any pending log operations, then sleeps until the next event occurs.
  1026. */
  1027. static void idle_state_handle(void)
  1028. {
  1029. if (NRF_LOG_PROCESS() == false)
  1030. {
  1031. nrf_pwr_mgmt_run();
  1032. }
  1033. }
  1034. /**@brief Function for handling events from the button handler module.
  1035. *
  1036. * @param[in] pin_no The pin that the event applies to.
  1037. * @param[in] button_action The button action (press/release).
  1038. */
  1039. static void button_event_handler(uint8_t pin_no, uint8_t button_action)
  1040. {
  1041. ret_code_t err_code;
  1042. uint32_t gpSts;
  1043. switch (pin_no)
  1044. {
  1045. case LEDBUTTON_BUTTON:
  1046. NRF_LOG_INFO("Send button data");
  1047. gpSts = nrf_gpio_pin_read(BSP_BUTTON_0);
  1048. NRF_LOG_INFO("gpSts=%d\r\n", gpSts);
  1049. if(gpSts == 0) // BTN_PRESSED=0
  1050. {
  1051. nrf_gpio_pin_clear(LED_1);
  1052. NRF_LOG_INFO("PRESSED\r\n");
  1053. SystemManager.SwitchOn = 1;
  1054. SendEmergencyLocal();
  1055. }else{
  1056. nrf_gpio_pin_set(LED_1);
  1057. NRF_LOG_INFO("Released\r\n");
  1058. }
  1059. break;
  1060. default:
  1061. APP_ERROR_HANDLER(pin_no);
  1062. break;
  1063. }
  1064. }
  1065. /**@brief Function for initializing the button handler module.
  1066. */
  1067. static void buttons_init(void)
  1068. {
  1069. ret_code_t err_code;
  1070. //The array must be static because a pointer to it will be saved in the button handler module.
  1071. static app_button_cfg_t buttons[] =
  1072. {
  1073. {LEDBUTTON_BUTTON, false, BUTTON_PULL, button_event_handler}
  1074. };
  1075. err_code = app_button_init(buttons, ARRAY_SIZE(buttons),
  1076. BUTTON_DETECTION_DELAY);
  1077. APP_ERROR_CHECK(err_code);
  1078. }
  1079. static void GPOut_Init()
  1080. {
  1081. uint32_t i;
  1082. for (i = 0; i < 4; ++i)
  1083. {
  1084. nrf_gpio_cfg_output(m_board_led_list[i]);
  1085. }
  1086. }
  1087. void ble_get_mac(uint8_t addr[8])
  1088. {
  1089. uint32_t err_code;
  1090. ble_gap_addr_t ble_addr;
  1091. err_code = sd_ble_gap_address_get(&ble_addr);
  1092. APP_ERROR_CHECK(err_code);
  1093. IPV6_EUI64_CREATE_FROM_EUI48(addr, ble_addr.addr, ble_addr.addr_type);
  1094. }
  1095. void _1000ms_timer_handle()
  1096. {
  1097. // NRF_LOG_RAW_INFO("_1000ms_timer_handle()\n");
  1098. switch(SystemManager.System_State){
  1099. case SYSTEM_NONE:
  1100. SystemTimer.SYSTEM_REGISTER_CNT = 0;
  1101. SystemTimer.SYSTEM_SERVER_COMM_CNT = 0;
  1102. SystemTimer.SYSTEM_SERVER_COMM_REQ_CNT = 0;
  1103. SystemTimer.SYSTEM_EMERGENCY_SIREN_CNT = 0;
  1104. break;
  1105. case SYSTEM_EMERGENCY_SIREN:
  1106. SystemTimer.SYSTEM_EMERGENCY_SIREN_CNT++;
  1107. NRF_LOG_RAW_INFO("_1000ms_timer_handle(SYSTEM_EMERGENCY_SIREN) -- [%d / %d]\n", SystemTimer.SYSTEM_EMERGENCY_SIREN_CNT, 60*10);
  1108. if(SystemTimer.SYSTEM_EMERGENCY_SIREN_CNT >= 60*10){
  1109. SystemTimer.SYSTEM_EMERGENCY_SIREN_CNT = 0;
  1110. SystemManager.System_State = SYSTEM_NONE;
  1111. PKLedOff();
  1112. PKBuzzerOff();
  1113. SystemManager.LedBlinkRun = 0;
  1114. SystemManager.Emg_Ack_Flag = 0;
  1115. }
  1116. if(SystemManager.Emg_Ack_Flag){
  1117. SystemManager.Emg_Resend_Cnt++;
  1118. if(SystemManager.Emg_Resend_Cnt >= 10){
  1119. SystemManager.Emg_Resend_Cnt = 0;
  1120. ReSendEmergency();
  1121. }
  1122. }
  1123. break;
  1124. case SYSTEM_SERVER_COMM:
  1125. SystemTimer.SYSTEM_SERVER_COMM_CNT++;
  1126. NRF_LOG_RAW_INFO("_1000ms_timer_handle(SYSTEM_SERVER_COMM) -- [%d / %d]\n", SystemTimer.SYSTEM_SERVER_COMM_CNT, 60*3+30);
  1127. if(SystemTimer.SYSTEM_SERVER_COMM_CNT >= 60*3+30){
  1128. SystemTimer.SYSTEM_SERVER_COMM_CNT = 0;
  1129. SystemManager.System_State = SYSTEM_NONE;
  1130. PKLedOff();
  1131. PKMicOff();
  1132. PKSpeakerOff();
  1133. SystemManager.LedBlinkRun = 0;
  1134. }
  1135. break;
  1136. case SYSTEM_REGISTER:
  1137. SystemTimer.SYSTEM_REGISTER_CNT++;
  1138. NRF_LOG_RAW_INFO("_1000ms_timer_handle(SYSTEM_REGISTER) -- [%d / %d]\n", SystemTimer.SYSTEM_REGISTER_CNT, 60*1);
  1139. if(SystemTimer.SYSTEM_REGISTER_CNT >= 60*1){
  1140. SystemTimer.SYSTEM_REGISTER_CNT = 0;
  1141. SystemManager.RegRequst = 0;
  1142. SystemManager.System_State = SYSTEM_NONE;
  1143. PKLedOff();
  1144. SystemManager.LedBlinkRun = 0;
  1145. }
  1146. break;
  1147. case SYSTEM_SERVER_COMM_REQ:
  1148. SystemTimer.SYSTEM_SERVER_COMM_REQ_CNT++;
  1149. NRF_LOG_RAW_INFO("_1000ms_timer_handle(SYSTEM_SERVER_COMM_REQ) -- [%d / %d]\n", SystemTimer.SYSTEM_SERVER_COMM_REQ_CNT, 60*1);
  1150. if(SystemTimer.SYSTEM_SERVER_COMM_REQ_CNT >= 60*1){
  1151. SystemTimer.SYSTEM_SERVER_COMM_REQ_CNT = 0;
  1152. SystemManager.RegRequst = 0;
  1153. SystemManager.System_State = SYSTEM_NONE;
  1154. PKLedOff();
  1155. PKBuzzerOff();
  1156. SystemManager.LedBlinkRun = 0;
  1157. }
  1158. break;
  1159. }
  1160. }
  1161. int main(void)
  1162. {
  1163. uint8_t i;
  1164. ret_code_t err_code;
  1165. ble_gap_addr_t dd;
  1166. dd.addr_id_peer = 0;
  1167. dd.addr_type = BLE_GAP_ADDR_TYPE_PUBLIC;
  1168. // Initialize.
  1169. log_init();
  1170. /* Register first to receive an event when initialization is complete. */
  1171. (void) fds_register(fds_evt_handler);
  1172. NRF_LOG_RAW_INFO("\n===========================================================\n\n");
  1173. NRF_LOG_RAW_INFO("IES-600RB CENTRAL Program Start -- Ver 1.10 2022/03/20\n");
  1174. NRF_LOG_RAW_INFO("\n===========================================================\n\n");
  1175. // NRF_LOG_RAW_INFO("Initializing fds...\n");
  1176. err_code = fds_init();
  1177. APP_ERROR_CHECK(err_code);
  1178. timer_init();
  1179. uart_init();
  1180. buttons_init();
  1181. GPOut_Init();
  1182. db_discovery_init();
  1183. power_management_init();
  1184. //sd_ble_gap_addr_get(&old_ble_addr);
  1185. ble_stack_init();
  1186. sd_ble_gap_addr_get(&old_ble_addr);
  1187. dd.addr[0] = IES200_1ST_MAC;
  1188. dd.addr[1] = IES200_2ST_MAC;
  1189. dd.addr[2] = IES200_3ST_MAC;
  1190. dd.addr[3] = old_ble_addr.addr[3];
  1191. dd.addr[4] = old_ble_addr.addr[4];
  1192. dd.addr[5] = old_ble_addr.addr[5];
  1193. sd_ble_gap_addr_set(&dd);
  1194. sd_ble_gap_addr_get(&new_ble_addr);
  1195. gatt_init();
  1196. nus_c_init();
  1197. scan_init();
  1198. for(i=0; i<3; i++){
  1199. PKLedOn();
  1200. nrf_delay_ms(100);
  1201. PKLedOff();
  1202. nrf_delay_ms(100);
  1203. }
  1204. // Start execution.
  1205. //printf("BLE UART central example started.=====\r\n");
  1206. NRF_LOG_INFO("BLE UART central example started.");
  1207. scan_start();
  1208. application_timers_start();
  1209. // Enabling the buttons.
  1210. err_code = app_button_enable();
  1211. APP_ERROR_CHECK(err_code);
  1212. PKLedOff();
  1213. //FlashTest();
  1214. LoadRegMac();
  1215. //delete_all_begin();
  1216. Server_Answer_Version();
  1217. nrf_delay_ms(1000);
  1218. Server_Answer_Version();
  1219. while(1)
  1220. {
  1221. idle_state_handle();
  1222. USART_DataCheck();
  1223. ParseEventServer();
  1224. LedToggle();
  1225. delete_all_process();
  1226. if(SystemTimer.MS_1000_TICK){
  1227. SystemTimer.MS_1000_TICK = 0;
  1228. _1000ms_timer_handle();
  1229. }
  1230. }
  1231. }