nrf_ble_scan(2974).c 55 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528152915301531153215331534153515361537153815391540154115421543154415451546154715481549155015511552155315541555155615571558155915601561156215631564156515661567156815691570157115721573157415751576157715781579158015811582158315841585158615871588158915901591159215931594159515961597159815991600160116021603160416051606160716081609161016111612161316141615161616171618161916201621162216231624162516261627162816291630163116321633163416351636163716381639164016411642164316441645164616471648164916501651165216531654165516561657165816591660166116621663166416651666166716681669167016711672167316741675167616771678167916801681168216831684168516861687168816891690169116921693169416951696169716981699170017011702170317041705170617071708170917101711171217131714171517161717171817191720172117221723172417251726172717281729173017311732173317341735173617371738173917401741174217431744174517461747174817491750175117521753175417551756175717581759176017611762176317641765176617671768176917701771177217731774177517761777177817791780178117821783178417851786178717881789179017911792179317941795179617971798179918001801180218031804180518061807180818091810181118121813181418151816181718181819182018211822182318241825182618271828182918301831183218331834183518361837183818391840184118421843184418451846184718481849185018511852185318541855185618571858185918601861186218631864186518661867186818691870187118721873187418751876187718781879188018811882188318841885188618871888188918901891189218931894189518961897189818991900190119021903190419051906190719081909191019111912191319141915191619171918191919201921192219231924192519261927192819291930193119321933193419351936193719381939
  1. /**
  2. * Copyright (c) 2018 - 2020, Nordic Semiconductor ASA
  3. *
  4. * All rights reserved.
  5. *
  6. * Redistribution and use in source and binary forms, with or without modification,
  7. * are permitted provided that the following conditions are met:
  8. *
  9. * 1. Redistributions of source code must retain the above copyright notice, this
  10. * list of conditions and the following disclaimer.
  11. *
  12. * 2. Redistributions in binary form, except as embedded into a Nordic
  13. * Semiconductor ASA integrated circuit in a product or a software update for
  14. * such product, must reproduce the above copyright notice, this list of
  15. * conditions and the following disclaimer in the documentation and/or other
  16. * materials provided with the distribution.
  17. *
  18. * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
  19. * contributors may be used to endorse or promote products derived from this
  20. * software without specific prior written permission.
  21. *
  22. * 4. This software, with or without modification, must only be used with a
  23. * Nordic Semiconductor ASA integrated circuit.
  24. *
  25. * 5. Any software provided in binary form under this license must not be reverse
  26. * engineered, decompiled, modified and/or disassembled.
  27. *
  28. * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
  29. * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  30. * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
  31. * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
  32. * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  33. * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
  34. * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  35. * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  36. * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
  37. * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  38. *
  39. */
  40. #include "sdk_common.h"
  41. #if NRF_MODULE_ENABLED(NRF_BLE_SCAN)
  42. #include "sdk_config.h"
  43. #include <stdlib.h>
  44. #include "nrf_ble_scan.h"
  45. #include "nrf_sdh.h"
  46. #include <string.h>
  47. #include "app_error.h"
  48. #include "nrf_assert.h"
  49. #include "sdk_macros.h"
  50. #include "ble_advdata.h"
  51. #define NRF_LOG_MODULE_NAME ble_scan
  52. #include "nrf_log.h"
  53. NRF_LOG_MODULE_REGISTER();
  54. #include <stdio.h>
  55. #include "our_service.h"
  56. #include "sysmgr.h"
  57. /**@brief Function for establishing the connection with a device.
  58. *
  59. * @details Connection is established if @ref NRF_BLE_SCAN_EVT_FILTER_MATCH
  60. * or @ref NRF_BLE_SCAN_EVT_WHITELIST_ADV_REPORT occurs and the module was
  61. * initialized in the automatic connection mode. This function can generate an event
  62. * to the main application when @ref sd_ble_gap_connect is used inside the function and it returns value
  63. * that is different than @ref NRF_SUCCESS.
  64. *
  65. * @param[in] p_scan_ctx Pointer to the Scanning Module instance.
  66. * @param[in] p_adv_report Advertising data.
  67. */
  68. static void nrf_ble_scan_connect_with_target(nrf_ble_scan_t const * const p_scan_ctx,
  69. ble_gap_evt_adv_report_t const * const p_adv_report)
  70. {
  71. ret_code_t err_code;
  72. scan_evt_t scan_evt;
  73. // For readability.
  74. ble_gap_addr_t const * p_addr = &p_adv_report->peer_addr;
  75. ble_gap_scan_params_t const * p_scan_params = &p_scan_ctx->scan_params;
  76. ble_gap_conn_params_t const * p_conn_params = &p_scan_ctx->conn_params;
  77. uint8_t con_cfg_tag = p_scan_ctx->conn_cfg_tag;
  78. // Return if the automatic connection is disabled.
  79. if (!p_scan_ctx->connect_if_match)
  80. {
  81. return;
  82. }
  83. // Stop scanning.
  84. nrf_ble_scan_stop();
  85. memset(&scan_evt, 0, sizeof(scan_evt));
  86. // Establish connection.
  87. err_code = sd_ble_gap_connect(p_addr,
  88. p_scan_params,
  89. p_conn_params,
  90. con_cfg_tag);
  91. NRF_LOG_DEBUG("Connecting");
  92. scan_evt.scan_evt_id = NRF_BLE_SCAN_EVT_CONNECTING_ERROR;
  93. scan_evt.params.connecting_err.err_code = err_code;
  94. NRF_LOG_DEBUG("Connection status: %d", err_code);
  95. // If an error occurred, send an event to the event handler.
  96. if ((err_code != NRF_SUCCESS) && (p_scan_ctx->evt_handler != NULL))
  97. {
  98. p_scan_ctx->evt_handler(&scan_evt);
  99. }
  100. }
  101. /**@brief Function for decoding the BLE address type.
  102. *
  103. * @param[in] p_addr The BLE address.
  104. *
  105. * @return Address type, or an error if the address type is incorrect, that is it does not match @ref BLE_GAP_ADDR_TYPES.
  106. *
  107. */
  108. static uint16_t nrf_ble_scan_address_type_decode(uint8_t const * p_addr)
  109. {
  110. uint8_t addr_type = p_addr[0];
  111. // See Bluetooth Core Specification Vol 6, Part B, section 1.3.
  112. addr_type = addr_type >> 6;
  113. addr_type &= 0x03;
  114. // Check address type.
  115. switch (addr_type)
  116. {
  117. case 0:
  118. {
  119. return BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE;
  120. }
  121. case 1:
  122. {
  123. return BLE_GAP_ADDR_TYPE_PUBLIC;
  124. }
  125. case 2:
  126. {
  127. return BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE;
  128. }
  129. case 3:
  130. {
  131. return BLE_GAP_ADDR_TYPE_RANDOM_STATIC;
  132. }
  133. default:
  134. {
  135. return BLE_ERROR_GAP_INVALID_BLE_ADDR;
  136. }
  137. }
  138. }
  139. #if (NRF_BLE_SCAN_FILTER_ENABLE == 1)
  140. #if (NRF_BLE_SCAN_ADDRESS_CNT > 0)
  141. /**@brief Function for searching for the provided address in the advertisement packets.
  142. *
  143. * @details Use this function to parse the received advertising data for the provided address.
  144. *
  145. *
  146. * @param[in] p_adv_report Advertising data to parse.
  147. * @param[in] p_addr Address to search for. The address length must correspond to @ref BLE_GAP_ADDR_LEN.
  148. *
  149. * @return True if the provided address was found, false otherwise.
  150. */
  151. static bool find_peer_addr(ble_gap_evt_adv_report_t const * const p_adv_report,
  152. ble_gap_addr_t const * p_addr)
  153. {
  154. if (p_addr->addr_type == p_adv_report->peer_addr.addr_type)
  155. {
  156. // Compare addresses.
  157. if (memcmp(p_addr->addr,
  158. p_adv_report->peer_addr.addr,
  159. sizeof(p_adv_report->peer_addr.addr)) == 0)
  160. {
  161. return true;
  162. }
  163. }
  164. return false;
  165. }
  166. /** @brief Function for comparing the provided address with the addresses of the advertising devices.
  167. *
  168. * @param[in] p_adv_report Advertising data to parse.
  169. * @param[in] p_scan_ctx Pointer to the Scanning Module instance.
  170. *
  171. * @retval True when the address matches with the addresses of the advertising devices. False otherwise.
  172. */
  173. static bool adv_addr_compare(ble_gap_evt_adv_report_t const * const p_adv_report,
  174. nrf_ble_scan_t const * const p_scan_ctx)
  175. {
  176. ble_gap_addr_t const * p_addr = p_scan_ctx->scan_filters.addr_filter.target_addr;
  177. uint8_t counter = p_scan_ctx->scan_filters.addr_filter.addr_cnt;
  178. for (uint8_t index = 0; index < counter; index++)
  179. {
  180. // Search for address.
  181. if (find_peer_addr(p_adv_report, &p_addr[index]))
  182. {
  183. return true;
  184. }
  185. }
  186. return false;
  187. }
  188. /**@brief Function for adding target address to the scanning filter.
  189. *
  190. * @param[in] p_addr Target address in the format required by the SoftDevice. If you need to convert the address, use @ref nrf_ble_scan_copy_addr_to_sd_gap_addr. The address length must correspond to @ref BLE_GAP_ADDR_LEN.
  191. * @param[in,out] p_scan_ctx Pointer to the Scanning Module instance.
  192. *
  193. * @retval NRF_SUCCESS If the filter is added successfully or if you try to add a filter that was already added before.
  194. * @retval NRF_ERROR_NO_MEMORY If the number of available filters is exceeded.
  195. * @retval BLE_ERROR_GAP_INVALID_BLE_ADDR If the BLE address type is invalid.
  196. */
  197. static ret_code_t nrf_ble_scan_addr_filter_add(nrf_ble_scan_t * const p_scan_ctx,
  198. uint8_t const * p_addr)
  199. {
  200. ble_gap_addr_t * p_addr_filter = p_scan_ctx->scan_filters.addr_filter.target_addr;
  201. uint8_t * p_counter = &p_scan_ctx->scan_filters.addr_filter.addr_cnt;
  202. uint8_t index;
  203. uint16_t addr_type;
  204. uint8_t temp_addr[BLE_GAP_ADDR_LEN];
  205. // If no memory for filter.
  206. if (*p_counter >= NRF_BLE_SCAN_ADDRESS_CNT)
  207. {
  208. return NRF_ERROR_NO_MEM;
  209. }
  210. // Check for duplicated filter.
  211. for (index = 0; index < NRF_BLE_SCAN_ADDRESS_CNT; index++)
  212. {
  213. if (!memcmp(p_addr_filter[index].addr, p_addr, BLE_GAP_ADDR_LEN))
  214. {
  215. return NRF_SUCCESS;
  216. }
  217. }
  218. // Inverting the address.
  219. for (uint8_t i = 0; i < BLE_GAP_ADDR_LEN; i++)
  220. {
  221. temp_addr[i] = p_addr[(BLE_GAP_ADDR_LEN - 1) - i];
  222. }
  223. // Decode address type.
  224. addr_type = nrf_ble_scan_address_type_decode(temp_addr);
  225. if (addr_type == BLE_ERROR_GAP_INVALID_BLE_ADDR)
  226. {
  227. return BLE_ERROR_GAP_INVALID_BLE_ADDR;
  228. }
  229. // Add target address to filter.
  230. p_addr_filter[*p_counter].addr_type = (uint8_t)addr_type;
  231. for (uint8_t i = 0; i < BLE_GAP_ADDR_LEN; i++)
  232. {
  233. p_addr_filter[*p_counter].addr[i] = p_addr[i];
  234. }
  235. NRF_LOG_DEBUG("Filter set on address type %i, address 0x",
  236. p_addr_filter[*p_counter].addr_type);
  237. for (index = 0; index < BLE_GAP_ADDR_LEN; index++)
  238. {
  239. NRF_LOG_DEBUG("%x", p_addr_filter[*p_counter].addr[index]);
  240. }
  241. NRF_LOG_DEBUG("\n\r");
  242. // Increase the address filter counter.
  243. *p_counter += 1;
  244. return NRF_SUCCESS;
  245. }
  246. #endif // NRF_BLE_SCAN_ADDRESS_CNT
  247. #if (NRF_BLE_SCAN_NAME_CNT > 0)
  248. /** @brief Function for comparing the provided name with the advertised name.
  249. *
  250. * @param[in] p_adv_report Advertising data to parse.
  251. * @param[in] p_scan_ctx Pointer to the Scanning Module instance.
  252. *
  253. * @retval True when the names match. False otherwise.
  254. */
  255. static bool adv_name_compare(ble_gap_evt_adv_report_t const * p_adv_report,
  256. nrf_ble_scan_t const * const p_scan_ctx)
  257. {
  258. nrf_ble_scan_name_filter_t const * p_name_filter = &p_scan_ctx->scan_filters.name_filter;
  259. uint8_t counter =
  260. p_scan_ctx->scan_filters.name_filter.name_cnt;
  261. uint8_t index;
  262. uint16_t data_len;
  263. data_len = p_adv_report->data.len;
  264. // Compare the name found with the name filter.
  265. for (index = 0; index < counter; index++)
  266. {
  267. if (ble_advdata_name_find(p_adv_report->data.p_data,
  268. data_len,
  269. p_name_filter->target_name[index]))
  270. {
  271. return true;
  272. }
  273. }
  274. return false;
  275. }
  276. /**@brief Function for adding name of the peripheral to the scanning filter.
  277. *
  278. * @param[in] p_name Peripheral name.
  279. * @param[in,out] p_scan_ctx Pointer to the Scanning Module instance.
  280. *
  281. * @retval NRF_SUCCESS If the filter is added successfully or if you try to add a filter that was already added before.
  282. * @retval NRF_ERROR_NULL If a NULL pointer is passed as input.
  283. * @retval NRF_ERROR_DATA_SIZE If the name filter length is too long. The maximum filter name length corresponds to @ref NRF_BLE_SCAN_NAME_MAX_LEN.
  284. * @retval NRF_ERROR_NO_MEMORY If the number of available filters is exceeded.
  285. */
  286. static ret_code_t nrf_ble_scan_name_filter_add(nrf_ble_scan_t * const p_scan_ctx,
  287. char const * p_name)
  288. {
  289. uint8_t index;
  290. uint8_t * counter = &p_scan_ctx->scan_filters.name_filter.name_cnt;
  291. uint8_t name_len = strlen(p_name);
  292. // Check the name length.
  293. if ((name_len == 0) || (name_len > NRF_BLE_SCAN_NAME_MAX_LEN))
  294. {
  295. return NRF_ERROR_DATA_SIZE;
  296. }
  297. // If no memory for filter.
  298. if (*counter >= NRF_BLE_SCAN_NAME_CNT)
  299. {
  300. return NRF_ERROR_NO_MEM;
  301. }
  302. // Check for duplicated filter.
  303. for (index = 0; index < NRF_BLE_SCAN_NAME_CNT; index++)
  304. {
  305. if (!strcmp(p_scan_ctx->scan_filters.name_filter.target_name[index], p_name))
  306. {
  307. return NRF_SUCCESS;
  308. }
  309. }
  310. // Add name to filter.
  311. memcpy(p_scan_ctx->scan_filters.name_filter.target_name[(*counter)++],
  312. p_name,
  313. strlen(p_name));
  314. NRF_LOG_DEBUG("Adding filter on %s name", p_name);
  315. return NRF_SUCCESS;
  316. }
  317. #endif // NRF_BLE_SCAN_NAME_CNT
  318. #if (NRF_BLE_SCAN_SHORT_NAME_CNT > 0)
  319. /** @brief Function for comparing the provided short name with the advertised short name.
  320. *
  321. * @param[in] p_adv_report Advertising data to parse.
  322. * @param[in] p_scan_ctx Pointer to the Scanning Module instance.
  323. *
  324. * @retval True when the names match. False otherwise.
  325. */
  326. static bool adv_short_name_compare(ble_gap_evt_adv_report_t const * const p_adv_report,
  327. nrf_ble_scan_t const * const p_scan_ctx)
  328. {
  329. nrf_ble_scan_short_name_filter_t const * p_name_filter =
  330. &p_scan_ctx->scan_filters.short_name_filter;
  331. uint8_t counter = p_scan_ctx->scan_filters.short_name_filter.name_cnt;
  332. uint8_t index;
  333. uint16_t data_len;
  334. data_len = p_adv_report->data.len;
  335. // Compare the name found with the name filters.
  336. for (index = 0; index < counter; index++)
  337. {
  338. if (ble_advdata_short_name_find(p_adv_report->data.p_data,
  339. data_len,
  340. p_name_filter->short_name[index].short_target_name,
  341. p_name_filter->short_name[index].short_name_min_len))
  342. {
  343. return true;
  344. }
  345. }
  346. return false;
  347. }
  348. /**@brief Function for adding the short name of the peripheral to the scanning filter.
  349. *
  350. * @param[in] p_short_name Short name of the peripheral.
  351. * @param[in,out] p_scan_ctx Pointer to the Scanning Module instance.
  352. *
  353. * @retval NRF_SUCCESS If the filter is added successfully or if you try to add a filter that was already added before.
  354. * @retval NRF_ERROR_NULL If a NULL pointer is passed as input.
  355. * @retval NRF_ERROR_DATA_SIZE If the name filter length is too long. The maximum filter name length corresponds to @ref NRF_BLE_SCAN_SHORT_NAME_MAX_LEN.
  356. * @retval NRF_ERROR_NO_MEMORY If the number of available filters is exceeded.
  357. */
  358. static ret_code_t nrf_ble_scan_short_name_filter_add(nrf_ble_scan_t * const p_scan_ctx,
  359. nrf_ble_scan_short_name_t const * p_short_name)
  360. {
  361. uint8_t index;
  362. uint8_t * p_counter =
  363. &p_scan_ctx->scan_filters.short_name_filter.name_cnt;
  364. nrf_ble_scan_short_name_filter_t * p_short_name_filter =
  365. &p_scan_ctx->scan_filters.short_name_filter;
  366. uint8_t name_len = strlen(p_short_name->p_short_name);
  367. // Check the name length.
  368. if ((name_len == 0) || (name_len > NRF_BLE_SCAN_SHORT_NAME_MAX_LEN))
  369. {
  370. return NRF_ERROR_DATA_SIZE;
  371. }
  372. // If no memory for filter.
  373. if (*p_counter >= NRF_BLE_SCAN_SHORT_NAME_CNT)
  374. {
  375. return NRF_ERROR_NO_MEM;
  376. }
  377. // Check for duplicated filter.
  378. for (index = 0; index < NRF_BLE_SCAN_SHORT_NAME_CNT; index++)
  379. {
  380. if (!strcmp(p_short_name_filter->short_name[index].short_target_name,
  381. p_short_name->p_short_name))
  382. {
  383. return NRF_SUCCESS;
  384. }
  385. }
  386. // Add name to the filter.
  387. p_short_name_filter->short_name[(*p_counter)].short_name_min_len =
  388. p_short_name->short_name_min_len;
  389. memcpy(p_short_name_filter->short_name[(*p_counter)++].short_target_name,
  390. p_short_name->p_short_name,
  391. strlen(p_short_name->p_short_name));
  392. NRF_LOG_DEBUG("Adding filter on %s name", p_short_name->p_short_name);
  393. return NRF_SUCCESS;
  394. }
  395. #endif
  396. #if (NRF_BLE_SCAN_UUID_CNT > 0)
  397. /**@brief Function for comparing the provided UUID with the UUID in the advertisement packets.
  398. *
  399. * @param[in] p_adv_report Advertising data to parse.
  400. * @param[in] p_scan_ctx Pointer to the Scanning Module instance.
  401. *
  402. * @return True if the UUIDs match. False otherwise.
  403. */
  404. static bool adv_uuid_compare(ble_gap_evt_adv_report_t const * const p_adv_report,
  405. nrf_ble_scan_t const * const p_scan_ctx)
  406. {
  407. nrf_ble_scan_uuid_filter_t const * p_uuid_filter = &p_scan_ctx->scan_filters.uuid_filter;
  408. bool const all_filters_mode = p_scan_ctx->scan_filters.all_filters_mode;
  409. uint8_t const counter =
  410. p_scan_ctx->scan_filters.uuid_filter.uuid_cnt;
  411. uint8_t index;
  412. uint16_t data_len;
  413. uint8_t uuid_match_cnt = 0;
  414. data_len = p_adv_report->data.len;
  415. for (index = 0; index < counter; index++)
  416. {
  417. if (ble_advdata_uuid_find(p_adv_report->data.p_data,
  418. data_len,
  419. &p_uuid_filter->uuid[index]))
  420. {
  421. uuid_match_cnt++;
  422. // In the normal filter mode, only one UUID is needed to match.
  423. if (!all_filters_mode)
  424. {
  425. break;
  426. }
  427. }
  428. else if (all_filters_mode)
  429. {
  430. break;
  431. }
  432. else
  433. {
  434. // Do nothing.
  435. }
  436. }
  437. // In the multifilter mode, all UUIDs must be found in the advertisement packets.
  438. if ((all_filters_mode && (uuid_match_cnt == counter)) ||
  439. ((!all_filters_mode) && (uuid_match_cnt > 0)))
  440. {
  441. return true;
  442. }
  443. return false;
  444. }
  445. /**@brief Function for adding UUID to the scanning filter.
  446. *
  447. * @param[in] uuid UUID, 16-bit size.
  448. * @param[in,out] p_scan_ctx Pointer to the Scanning Module instance.
  449. *
  450. * @retval NRF_SUCCESS If the scanning started. Otherwise, an error code is returned, also if you tried to add a filter that was already added before.
  451. * @retval NRF_ERROR_NO_MEMORY If the number of available filters is exceeded.
  452. */
  453. static ret_code_t nrf_ble_scan_uuid_filter_add(nrf_ble_scan_t * const p_scan_ctx,
  454. ble_uuid_t const * p_uuid)
  455. {
  456. ble_uuid_t * p_uuid_filter = p_scan_ctx->scan_filters.uuid_filter.uuid;
  457. uint8_t * p_counter = &p_scan_ctx->scan_filters.uuid_filter.uuid_cnt;
  458. uint8_t index;
  459. // If no memory.
  460. if (*p_counter >= NRF_BLE_SCAN_UUID_CNT)
  461. {
  462. return NRF_ERROR_NO_MEM;
  463. }
  464. // Check for duplicated filter.
  465. for (index = 0; index < NRF_BLE_SCAN_UUID_CNT; index++)
  466. {
  467. if (p_uuid_filter[index].uuid == p_uuid->uuid)
  468. {
  469. return NRF_SUCCESS;
  470. }
  471. }
  472. // Add UUID to the filter.
  473. p_uuid_filter[(*p_counter)++] = *p_uuid;
  474. NRF_LOG_DEBUG("Added filter on UUID %x", p_uuid->uuid);
  475. return NRF_SUCCESS;
  476. }
  477. #endif // NRF_BLE_SCAN_UUID_CNT
  478. #if (NRF_BLE_SCAN_APPEARANCE_CNT)
  479. /**@brief Function for comparing the provided appearance with the appearance in the advertisement packets.
  480. *
  481. * @param[in] p_adv_report Advertising data to parse.
  482. * @param[in,out] p_scan_ctx Pointer to the Scanning Module instance.
  483. *
  484. * @return True if the appearances match. False otherwise.
  485. */
  486. static bool adv_appearance_compare(ble_gap_evt_adv_report_t const * const p_adv_report,
  487. nrf_ble_scan_t const * const p_scan_ctx)
  488. {
  489. nrf_ble_scan_appearance_filter_t const * p_appearance_filter =
  490. &p_scan_ctx->scan_filters.appearance_filter;
  491. uint8_t const counter =
  492. p_scan_ctx->scan_filters.appearance_filter.appearance_cnt;
  493. uint8_t index;
  494. uint16_t data_len;
  495. data_len = p_adv_report->data.len;
  496. // Verify if the advertised appearance matches the provided appearance.
  497. for (index = 0; index < counter; index++)
  498. {
  499. if (ble_advdata_appearance_find(p_adv_report->data.p_data,
  500. data_len,
  501. &p_appearance_filter->appearance[index]))
  502. {
  503. return true;
  504. }
  505. }
  506. return false;
  507. }
  508. /**@brief Function for adding appearance to the scanning filter.
  509. *
  510. * @param[in] appearance Appearance to be added.
  511. * @param[in,out] p_scan_ctx Pointer to the Scanning Module instance.
  512. *
  513. * @retval NRF_SUCCESS If the filter is added successfully or if you try to add a filter that was already added before.
  514. * @retval NRF_ERROR_NULL If a NULL pointer is passed as input.
  515. * @retval NRF_ERROR_NO_MEMORY If the number of available filters is exceeded.
  516. */
  517. static ret_code_t nrf_ble_scan_appearance_filter_add(nrf_ble_scan_t * const p_scan_ctx,
  518. uint16_t appearance)
  519. {
  520. uint16_t * p_appearance_filter = p_scan_ctx->scan_filters.appearance_filter.appearance;
  521. uint8_t * p_counter = &p_scan_ctx->scan_filters.appearance_filter.appearance_cnt;
  522. uint8_t index;
  523. // If no memory.
  524. if (*p_counter >= NRF_BLE_SCAN_APPEARANCE_CNT)
  525. {
  526. return NRF_ERROR_NO_MEM;
  527. }
  528. // Check for duplicated filter.
  529. for ( index = 0; index < NRF_BLE_SCAN_APPEARANCE_CNT; index++)
  530. {
  531. if (p_appearance_filter[index] == appearance)
  532. {
  533. return NRF_SUCCESS;
  534. }
  535. }
  536. // Add appearance to the filter.
  537. p_appearance_filter[(*p_counter)++] = appearance;
  538. NRF_LOG_DEBUG("Added filter on appearance %x", appearance);
  539. return NRF_SUCCESS;
  540. }
  541. #endif // NRF_BLE_SCAN_APPEARANCE_CNT
  542. ret_code_t nrf_ble_scan_filter_set(nrf_ble_scan_t * const p_scan_ctx,
  543. nrf_ble_scan_filter_type_t type,
  544. void const * p_data)
  545. {
  546. VERIFY_PARAM_NOT_NULL(p_scan_ctx);
  547. VERIFY_PARAM_NOT_NULL(p_data);
  548. switch (type)
  549. {
  550. #if (NRF_BLE_SCAN_NAME_CNT > 0)
  551. case SCAN_NAME_FILTER:
  552. {
  553. char * p_name = (char *)p_data;
  554. return nrf_ble_scan_name_filter_add(p_scan_ctx, p_name);
  555. }
  556. #endif
  557. #if (NRF_BLE_SCAN_SHORT_NAME_CNT > 0)
  558. case SCAN_SHORT_NAME_FILTER:
  559. {
  560. nrf_ble_scan_short_name_t * p_short_name = (nrf_ble_scan_short_name_t *)p_data;
  561. return nrf_ble_scan_short_name_filter_add(p_scan_ctx, p_short_name);
  562. }
  563. #endif
  564. #if (NRF_BLE_SCAN_ADDRESS_CNT > 0)
  565. case SCAN_ADDR_FILTER:
  566. {
  567. uint8_t * p_addr = (uint8_t *)p_data;
  568. return nrf_ble_scan_addr_filter_add(p_scan_ctx, p_addr);
  569. }
  570. #endif
  571. #if (NRF_BLE_SCAN_UUID_CNT > 0)
  572. case SCAN_UUID_FILTER:
  573. {
  574. ble_uuid_t * p_uuid = (ble_uuid_t *)p_data;
  575. return nrf_ble_scan_uuid_filter_add(p_scan_ctx, p_uuid);
  576. }
  577. #endif
  578. #if (NRF_BLE_SCAN_APPEARANCE_CNT > 0)
  579. case SCAN_APPEARANCE_FILTER:
  580. {
  581. uint16_t appearance = *((uint16_t *)p_data);
  582. return nrf_ble_scan_appearance_filter_add(p_scan_ctx, appearance);
  583. }
  584. #endif
  585. default:
  586. return NRF_ERROR_INVALID_PARAM;
  587. }
  588. }
  589. ret_code_t nrf_ble_scan_all_filter_remove(nrf_ble_scan_t * const p_scan_ctx)
  590. {
  591. #if (NRF_BLE_SCAN_NAME_CNT > 0)
  592. nrf_ble_scan_name_filter_t * p_name_filter = &p_scan_ctx->scan_filters.name_filter;
  593. memset(p_name_filter->target_name, 0, sizeof(p_name_filter->target_name));
  594. p_name_filter->name_cnt = 0;
  595. #endif
  596. #if (NRF_BLE_SCAN_SHORT_NAME_CNT > 0)
  597. nrf_ble_scan_short_name_filter_t * p_short_name_filter =
  598. &p_scan_ctx->scan_filters.short_name_filter;
  599. memset(p_short_name_filter->short_name, 0, sizeof(p_short_name_filter->short_name));
  600. p_short_name_filter->name_cnt = 0;
  601. #endif
  602. #if (NRF_BLE_SCAN_ADDRESS_CNT > 0)
  603. nrf_ble_scan_addr_filter_t * p_addr_filter = &p_scan_ctx->scan_filters.addr_filter;
  604. memset(p_addr_filter->target_addr, 0, sizeof(p_addr_filter->target_addr));
  605. p_addr_filter->addr_cnt = 0;
  606. #endif
  607. #if (NRF_BLE_SCAN_UUID_CNT > 0)
  608. nrf_ble_scan_uuid_filter_t * p_uuid_filter = &p_scan_ctx->scan_filters.uuid_filter;
  609. memset(p_uuid_filter->uuid, 0, sizeof(p_uuid_filter->uuid));
  610. p_uuid_filter->uuid_cnt = 0;
  611. #endif
  612. #if (NRF_BLE_SCAN_APPEARANCE_CNT > 0)
  613. nrf_ble_scan_appearance_filter_t * p_appearance_filter =
  614. &p_scan_ctx->scan_filters.appearance_filter;
  615. memset(p_appearance_filter->appearance, 0, sizeof(p_appearance_filter->appearance));
  616. p_appearance_filter->appearance_cnt = 0;
  617. #endif
  618. return NRF_SUCCESS;
  619. }
  620. ret_code_t nrf_ble_scan_filters_enable(nrf_ble_scan_t * const p_scan_ctx,
  621. uint8_t mode,
  622. bool match_all)
  623. {
  624. VERIFY_PARAM_NOT_NULL(p_scan_ctx);
  625. // Check if the mode is correct.
  626. if ((!(mode & NRF_BLE_SCAN_ADDR_FILTER)) &&
  627. (!(mode & NRF_BLE_SCAN_NAME_FILTER)) &&
  628. (!(mode & NRF_BLE_SCAN_UUID_FILTER)) &&
  629. (!(mode & NRF_BLE_SCAN_SHORT_NAME_FILTER)) &&
  630. (!(mode & NRF_BLE_SCAN_APPEARANCE_FILTER)))
  631. {
  632. return NRF_ERROR_INVALID_PARAM;
  633. }
  634. ret_code_t err_code;
  635. // Disable filters.
  636. err_code = nrf_ble_scan_filters_disable(p_scan_ctx);
  637. ASSERT(err_code == NRF_SUCCESS);
  638. nrf_ble_scan_filters_t * p_filters = &p_scan_ctx->scan_filters;
  639. // Turn on the filters of your choice.
  640. #if (NRF_BLE_SCAN_ADDRESS_CNT > 0)
  641. if (mode & NRF_BLE_SCAN_ADDR_FILTER)
  642. {
  643. p_filters->addr_filter.addr_filter_enabled = true;
  644. }
  645. #endif
  646. #if (NRF_BLE_SCAN_NAME_CNT > 0)
  647. if (mode & NRF_BLE_SCAN_NAME_FILTER)
  648. {
  649. p_filters->name_filter.name_filter_enabled = true;
  650. }
  651. #endif
  652. #if (NRF_BLE_SCAN_SHORT_NAME_CNT > 0)
  653. if (mode & NRF_BLE_SCAN_SHORT_NAME_FILTER)
  654. {
  655. p_filters->short_name_filter.short_name_filter_enabled = true;
  656. }
  657. #endif
  658. #if (NRF_BLE_SCAN_UUID_CNT > 0)
  659. if (mode & NRF_BLE_SCAN_UUID_FILTER)
  660. {
  661. p_filters->uuid_filter.uuid_filter_enabled = true;
  662. }
  663. #endif
  664. #if (NRF_BLE_SCAN_APPEARANCE_CNT > 0)
  665. if (mode & NRF_BLE_SCAN_APPEARANCE_FILTER)
  666. {
  667. p_filters->appearance_filter.appearance_filter_enabled = true;
  668. }
  669. #endif
  670. // Select the filter mode.
  671. p_filters->all_filters_mode = match_all;
  672. return NRF_SUCCESS;
  673. }
  674. ret_code_t nrf_ble_scan_filters_disable(nrf_ble_scan_t * const p_scan_ctx)
  675. {
  676. VERIFY_PARAM_NOT_NULL(p_scan_ctx);
  677. // Disable all filters.
  678. #if (NRF_BLE_SCAN_NAME_CNT > 0)
  679. bool * p_name_filter_enabled = &p_scan_ctx->scan_filters.name_filter.name_filter_enabled;
  680. *p_name_filter_enabled = false;
  681. #endif
  682. #if (NRF_BLE_SCAN_ADDRESS_CNT > 0)
  683. bool * p_addr_filter_enabled = &p_scan_ctx->scan_filters.addr_filter.addr_filter_enabled;
  684. *p_addr_filter_enabled = false;
  685. #endif
  686. #if (NRF_BLE_SCAN_UUID_CNT > 0)
  687. bool * p_uuid_filter_enabled = &p_scan_ctx->scan_filters.uuid_filter.uuid_filter_enabled;
  688. *p_uuid_filter_enabled = false;
  689. #endif
  690. #if (NRF_BLE_SCAN_APPEARANCE_CNT > 0)
  691. bool * p_appearance_filter_enabled =
  692. &p_scan_ctx->scan_filters.appearance_filter.appearance_filter_enabled;
  693. *p_appearance_filter_enabled = false;
  694. #endif
  695. return NRF_SUCCESS;
  696. }
  697. ret_code_t nrf_ble_scan_filter_get(nrf_ble_scan_t * const p_scan_ctx, nrf_ble_scan_filters_t * p_status)
  698. {
  699. VERIFY_PARAM_NOT_NULL(p_scan_ctx);
  700. VERIFY_PARAM_NOT_NULL(p_status);
  701. *p_status = p_scan_ctx->scan_filters;
  702. return NRF_SUCCESS;
  703. }
  704. #endif // NRF_BLE_SCAN_FILTER_ENABLE
  705. int ISCPacket;
  706. char ScanHSBuff[15];
  707. uint8_t *pAdvRep;
  708. #if 1
  709. int HS_AdParser(char* data)
  710. {
  711. int len;
  712. int j;
  713. int i;
  714. char* pData = data;
  715. uint8_t temp_buf[6] = {0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};
  716. if( *(data+1) == 0xff )
  717. return 0;
  718. len = *data;
  719. //NRF_LOG_RAW_INFO("Len:%d ", len );
  720. data++;
  721. //NRF_LOG_RAW_INFO("Flag:0x%02x \n", *data );
  722. SystemManager.PtrLocalNameLen = len;
  723. if( *data == 9)
  724. {
  725. SystemManager.PtrLocalName = data+1;
  726. if( strncmp("ICSB", data+1, 4) == 0 )
  727. {
  728. if( SystemManager.LedBlinkTimer > 0 )
  729. {
  730. //NRF_LOG_RAW_INFO(" << Transfer Busy >>\n");
  731. return 0;
  732. }else{
  733. SystemManager.DevType = DEV_BAND_ADV;
  734. }
  735. }
  736. else if( strncmp("ICSCAR", data+1, 6) == 0 )
  737. {
  738. NRF_LOG_RAW_INFO("ICSCAR\n");
  739. if( SystemManager.LedBlinkTimer > 0 )
  740. {
  741. NRF_LOG_RAW_INFO(" << Transfer Busy >>\n");
  742. return 0;
  743. }else{
  744. SystemManager.TmpPtr = data+7;
  745. if( memcmp( SystemManager.TmpPtr, new_ble_addr.addr, 6) == 0 ) // Respons
  746. {
  747. SystemManager.DevType = DEV_BAND_PARK;
  748. SystemManager.Encryption_Mode = AES_ENC_CAR;
  749. }
  750. else if(memcmp( SystemManager.TmpPtr, temp_buf, 6) == 0 ) // Advertise
  751. {
  752. ;
  753. }
  754. }
  755. }
  756. else if( strncmp("ICSEMG", data+1, 6) == 0 )
  757. {
  758. NRF_LOG_RAW_INFO("ICSEMG\n");
  759. if( SystemManager.LedBlinkTimer < 0 ){
  760. SystemManager.TmpPtr = data+7;
  761. if( memcmp( SystemManager.TmpPtr, new_ble_addr.addr, 6) == 0 ) // Response
  762. {
  763. SystemManager.DevType = DEV_BAND_EMG;
  764. SystemManager.Encryption_Mode = AES_ENC_EMG;
  765. }
  766. else if(memcmp( SystemManager.TmpPtr, temp_buf, 6) == 0 ) // Advertise
  767. {
  768. ;
  769. }
  770. }
  771. }
  772. else if( strncmp("ICSWES", data+1, 6) == 0 )
  773. {
  774. NRF_LOG_RAW_INFO("==> ICSWES : ");
  775. for(i=0; i<len; i++){
  776. NRF_LOG_RAW_INFO("%02X, ", pData[i]);
  777. }
  778. NRF_LOG_RAW_INFO("\n");
  779. SystemManager.DevType = DEV_WES_ADV;
  780. }
  781. else if( strncmp("ICSPCA", data+1, 6) == 0 )
  782. {
  783. NRF_LOG_RAW_INFO("==> ICSPCA : ");
  784. for(i=0; i<17; i++){
  785. NRF_LOG_RAW_INFO("%02X, ", pData[i]);
  786. }
  787. NRF_LOG_RAW_INFO("\n");
  788. if( SystemManager.LedBlinkTimer < 0 )
  789. {
  790. NRF_LOG_RAW_INFO(" << Transfer Busy >>\n");
  791. return 0;
  792. }
  793. SystemManager.TmpPtr = data+7;
  794. if( memcmp( SystemManager.TmpPtr, new_ble_addr.addr, 6) == 0 )
  795. {
  796. for(i=0; i<17; i++)
  797. NRF_LOG_RAW_INFO("%02X, ", pData[i]);
  798. NRF_LOG_RAW_INFO("\n");
  799. SystemManager.DevType = DEV_IOS_PARK;
  800. NRF_LOG_RAW_INFO("==> ICSPCA_MAC\n");
  801. }
  802. SystemManager.Encryption_Mode = AES_ENC_PCA;
  803. }
  804. }
  805. return 0;
  806. }
  807. #else
  808. int HS_AdParser(char* data)
  809. {
  810. int len;
  811. int j;
  812. int i;
  813. char* pData = data;
  814. if( *(data+1) == 0xff )
  815. return 0;
  816. len = *data;
  817. //NRF_LOG_RAW_INFO("Len:%d ", len );
  818. data++;
  819. //NRF_LOG_RAW_INFO("Flag:0x%02x \n", *data );
  820. SystemManager.PtrLocalNameLen = len;
  821. ISCPacket = 0;
  822. if( *data == 9)
  823. {
  824. SystemManager.PtrLocalName = data+1;
  825. #if 0 // jakuja
  826. for(i=0; i<len; i++)
  827. NRF_LOG_RAW_INFO("%02X, ", data[i]);
  828. NRF_LOG_RAW_INFO("\n");
  829. #endif
  830. if( strncmp("ICSCAR", data+1, 6) == 0 )
  831. {
  832. NRF_LOG_RAW_INFO("ICSCAR\n");
  833. SystemManager.TmpPtr = data+7;
  834. if( memcmp( SystemManager.TmpPtr, new_ble_addr.addr, 6) == 0 )
  835. {
  836. SystemManager.DevType = DEV_BAND_PARK;
  837. ISCPacket = 5;
  838. }
  839. SystemManager.BandMode = AES_ENC_CAR;
  840. }
  841. else if( strncmp("ICSEMG", data+1, 6) == 0 )
  842. {
  843. NRF_LOG_RAW_INFO("ICSEMG\n");
  844. SystemManager.TmpPtr = data+7;
  845. SystemManager.BandMode = AES_ENC_EMG;
  846. if( memcmp( SystemManager.TmpPtr, new_ble_addr.addr, 6) == 0 )
  847. {
  848. SystemManager.DevType = DEV_EMG_BAND;
  849. NRF_LOG_RAW_INFO("==> DEV_EMG_BAND\n");
  850. ISCPacket = 5;
  851. }
  852. }
  853. else if( strncmp("ICSB", data+1, 4) == 0 )
  854. {
  855. if( SystemManager.LedBlinkTimer < 0 )
  856. {
  857. ISCPacket = 1;
  858. //SystemTimer.TMR_CON_START = 0;
  859. SystemManager.DevType = DEV_BAND_ADV;
  860. }
  861. }else if( strncmp("ICSWES", data+1, 6) == 0 )
  862. {
  863. if( SystemManager.LedBlinkTimer < 0 )
  864. {
  865. ISCPacket = 1;
  866. //SystemTimer.TMR_CON_START = 0;
  867. SystemManager.DevType = DEV_WES_ADV;
  868. }
  869. }else if( strncmp("ICSPCA", data+1, 6) == 0 )
  870. {
  871. for(i=0; i<17; i++)
  872. NRF_LOG_RAW_INFO("%02X, ", pData[i]);
  873. NRF_LOG_RAW_INFO("\n");
  874. SystemManager.TmpPtr = data+7;
  875. if( memcmp( SystemManager.TmpPtr, new_ble_addr.addr, 6) == 0 )
  876. {
  877. SystemManager.DevType = DEV_IOS_PARK;
  878. NRF_LOG_RAW_INFO("==> DEV_IOS_PARK\n");
  879. ISCPacket = 5;
  880. SystemManager.LocalNameAddr[0] = new_ble_addr.addr[0];
  881. SystemManager.LocalNameAddr[1] = new_ble_addr.addr[1];
  882. SystemManager.LocalNameAddr[2] = new_ble_addr.addr[2];
  883. SystemManager.LocalNameAddr[3] = new_ble_addr.addr[3];
  884. SystemManager.LocalNameAddr[4] = new_ble_addr.addr[4];
  885. SystemManager.LocalNameAddr[5] = new_ble_addr.addr[5];
  886. }
  887. SystemManager.BandMode = AES_ENC_PCA;
  888. }
  889. }
  890. return 0;
  891. }
  892. #endif
  893. void HS_ParseAdvPacket(char* data, int dataLen, int flag)
  894. {
  895. int len, validLen;
  896. char* pData;
  897. int i;
  898. int j;
  899. int v=0;
  900. int result;
  901. pData = data;
  902. validLen = dataLen;
  903. if( flag )
  904. {
  905. // NRF_LOG_RAW_INFO("MEM : %08x ==> ", pData) ;
  906. while(1)
  907. {
  908. result = HS_AdParser(pData);
  909. // if( result == 0 )
  910. // break;
  911. len = *pData;
  912. validLen -= len+1;
  913. //printf("len:%d validLen:%d\n", len, validLen);
  914. if( validLen <= 0 )
  915. break;
  916. pData += len+1;
  917. }
  918. }
  919. }
  920. /**@brief Function for calling the BLE_GAP_EVT_ADV_REPORT event to check whether the received
  921. * scanning data matches the scan configuration.
  922. *
  923. * @param[in] p_scan_ctx Pointer to the Scanning Module instance.
  924. * @param[in] p_adv_report Advertising report.
  925. */
  926. // jakuja
  927. static void nrf_ble_scan_on_adv_report(nrf_ble_scan_t const * const p_scan_ctx, ble_gap_evt_adv_report_t const * const p_adv_report)
  928. {
  929. scan_evt_t scan_evt;
  930. int i;
  931. uint32_t err_code;
  932. uint8_t *pdata;
  933. uint8_t addr[6];
  934. #if (NRF_BLE_SCAN_FILTER_ENABLE == 1)
  935. uint8_t filter_cnt = 0;
  936. uint8_t filter_match_cnt = 0;
  937. #endif
  938. SystemManager.DevType = DEV_NONE;
  939. memset(&scan_evt, 0, sizeof(scan_evt));
  940. scan_evt.p_scan_params = &p_scan_ctx->scan_params;
  941. pdata = p_adv_report->data.p_data;
  942. pAdvRep = p_adv_report->data.p_data;;
  943. if( SystemTimer.SVR_SEND_TIMER < 1000 )
  944. goto SCAN_GOING;
  945. #if 0
  946. for(i=0; i<p_adv_report->data.len; i++)
  947. NRF_LOG_RAW_INFO("%02X, ", p_adv_report->data.p_data[i]);
  948. NRF_LOG_RAW_INFO("\n");
  949. NRF_LOG_RAW_INFO("m_nrf_sdh_continue : %d, m_nrf_sdh_enabled : %d ", m_nrf_sdh_continue, m_nrf_sdh_enabled);
  950. #endif
  951. // ONE PASS APP (안드로이드)
  952. if(p_adv_report->data.p_data[3] == 0x19 && p_adv_report->data.p_data[4] == 0xFF && p_adv_report->data.p_data[5] == 0x31 && p_adv_report->data.p_data[6] == 0x01 && p_adv_report->data.p_data[7] == 0x02 && p_adv_report->data.p_data[8] == 0xEE){
  953. AppParkingCheck_Android(p_adv_report->data.p_data);
  954. goto SCAN_GOING;
  955. }
  956. // ONE PASS APP (IOS)
  957. if(p_adv_report->data.p_data[3] == 0x02 && p_adv_report->data.p_data[4] == 0x0A && p_adv_report->data.p_data[5] == 0x0C && p_adv_report->data.p_data[6] == 0x11 && p_adv_report->data.p_data[7] == 0x07 ){
  958. //NRF_LOG_RAW_INFO("IOS APP PARKING\n");
  959. AppParkingCheck_IOS(p_adv_report->data.p_data);
  960. goto SCAN_GOING;
  961. }
  962. HS_ParseAdvPacket(p_adv_report->data.p_data, p_adv_report->data.len, 1);
  963. if( SystemManager.DevType == DEV_NONE )
  964. goto SCAN_GOING;
  965. memset(ScanHSBuff, 0x00, sizeof(ScanHSBuff));
  966. sprintf(ScanHSBuff, "%02x%02x%02x%02x%02x%02x", p_adv_report->peer_addr.addr[0],
  967. p_adv_report->peer_addr.addr[1],
  968. p_adv_report->peer_addr.addr[2],
  969. p_adv_report->peer_addr.addr[3],
  970. p_adv_report->peer_addr.addr[4],
  971. p_adv_report->peer_addr.addr[5]);
  972. SystemManager.PtrPeerAddrStr = ScanHSBuff;
  973. SystemManager.PeerAddr[0] = p_adv_report->peer_addr.addr[0];
  974. SystemManager.PeerAddr[1] = p_adv_report->peer_addr.addr[1];
  975. SystemManager.PeerAddr[2] = p_adv_report->peer_addr.addr[2];
  976. SystemManager.PeerAddr[3] = p_adv_report->peer_addr.addr[3];
  977. SystemManager.PeerAddr[4] = p_adv_report->peer_addr.addr[4];
  978. SystemManager.PeerAddr[5] = p_adv_report->peer_addr.addr[5];
  979. if( SystemManager.DevType == DEV_BAND_ADV){
  980. SystemManager.DevType = DEV_NONE;
  981. goto SCAN_GOING;
  982. }
  983. else if( SystemManager.DevType == DEV_BAND_PARK || SystemManager.DevType == DEV_BAND_EMG)
  984. {
  985. if( SystemManager.LedBlinkTimer && SystemTimer.PARK_KEEP_TIMER > 5000)
  986. {
  987. SystemTimer.PARK_KEEP_TIMER = 0;
  988. SystemManager.DevType = DEV_NONE;
  989. #if 1
  990. NRF_LOG_RAW_INFO("name len is %d ", SystemManager.PtrLocalNameLen);
  991. for( i=0; i<SystemManager.PtrLocalNameLen; i++)
  992. {
  993. NRF_LOG_RAW_INFO("%02x ", *(SystemManager.PtrLocalName+i) );
  994. }
  995. NRF_LOG_RAW_INFO("\n");
  996. #endif
  997. }
  998. goto GOTO_CONNECT;
  999. }
  1000. else if( SystemManager.DevType == DEV_WES_ADV )
  1001. {
  1002. NRF_LOG_RAW_INFO("================= DEV_WES_ADV\n");
  1003. SystemManager.DevType = DEV_NONE;
  1004. if( SystemManager.RegRequst == 1 ) // 등록모드면
  1005. {
  1006. NRF_LOG_RAW_INFO("Reciver Mode is Register\n");
  1007. SystemManager.Encryption_Mode = AES_ENC_WES;
  1008. goto GOTO_CONNECT;
  1009. }
  1010. if( FindRegMac(ScanHSBuff) == 1 ) // MAC이 등록되어있지 않으면
  1011. {
  1012. goto GOTO_CONNECT;
  1013. }else{
  1014. goto SCAN_GOING;
  1015. }
  1016. }
  1017. else if( SystemManager.DevType == DEV_IOS_PARK )
  1018. {
  1019. NRF_LOG_RAW_INFO("================= DEV_IOS_PARK\n");
  1020. NRF_LOG_RAW_INFO("name len is %d ", SystemManager.PtrLocalNameLen);
  1021. for( i=0; i<SystemManager.PtrLocalNameLen; i++)
  1022. {
  1023. NRF_LOG_RAW_INFO("%02x ", *(SystemManager.PtrLocalName+i) );
  1024. }
  1025. NRF_LOG_RAW_INFO("\n");
  1026. // goto SCAN_GOING;
  1027. goto GOTO_CONNECT;
  1028. }
  1029. #if 0
  1030. if( ISCPacket == 1)
  1031. {
  1032. int i;
  1033. if( FindRegMac(ScanHSBuff) == 0 )
  1034. {
  1035. scan_evt.scan_evt_id = NRF_BLE_SCAN_EVT_NOT_FOUND;
  1036. scan_evt.params.p_not_found = p_adv_report;
  1037. // If the event handler is not NULL, notify the main application.
  1038. if (p_scan_ctx->evt_handler != NULL)
  1039. {
  1040. //p_scan_ctx->evt_handler(&scan_evt);
  1041. }
  1042. // Resume the scanning.
  1043. UNUSED_RETURN_VALUE(sd_ble_gap_scan_start(NULL, &p_scan_ctx->scan_buffer));
  1044. ISCPacket = 0;
  1045. if( SystemManager.RegRequst == 0 ) // 등록모드가 아니면
  1046. return;
  1047. }
  1048. //NRF_LOG_RAW_INFO("================= Emergency\n");
  1049. for( i=0; i<6; i++)
  1050. {
  1051. NRF_LOG_RAW_INFO("%02x ", p_adv_report->peer_addr.addr[i]);
  1052. }
  1053. NRF_LOG_RAW_INFO("\n");
  1054. ISCPacket = 0;
  1055. }
  1056. else if( ISCPacket == 2)
  1057. if( ISCPacket == 2)
  1058. {
  1059. int i;
  1060. // NRF_LOG_RAW_INFO("================= Emergency\n");
  1061. for( i=0; i<6; i++)
  1062. {
  1063. NRF_LOG_RAW_INFO("%02x ", p_adv_report->peer_addr.addr[i]);
  1064. }
  1065. NRF_LOG_RAW_INFO("\n");
  1066. ISCPacket = 0;
  1067. }else{
  1068. if( SystemManager.DevType == DEV_IOS_PARK )
  1069. {
  1070. NRF_LOG_RAW_INFO("================= One Pass Connect\n");
  1071. goto GOTO_CONNECT;
  1072. }
  1073. SCAN_GOING:
  1074. scan_evt.scan_evt_id = NRF_BLE_SCAN_EVT_NOT_FOUND;
  1075. scan_evt.params.p_not_found = p_adv_report;
  1076. // If the event handler is not NULL, notify the main application.
  1077. if (p_scan_ctx->evt_handler != NULL)
  1078. {
  1079. //p_scan_ctx->evt_handler(&scan_evt);
  1080. }
  1081. // Resume the scanning.
  1082. UNUSED_RETURN_VALUE(sd_ble_gap_scan_start(NULL, &p_scan_ctx->scan_buffer));
  1083. ISCPacket = 0;
  1084. return;
  1085. }
  1086. #endif
  1087. SCAN_GOING:
  1088. scan_evt.scan_evt_id = NRF_BLE_SCAN_EVT_NOT_FOUND;
  1089. scan_evt.params.p_not_found = p_adv_report;
  1090. // If the event handler is not NULL, notify the main application.
  1091. if (p_scan_ctx->evt_handler != NULL)
  1092. {
  1093. //p_scan_ctx->evt_handler(&scan_evt);
  1094. }
  1095. // Resume the scanning.
  1096. UNUSED_RETURN_VALUE(sd_ble_gap_scan_start(NULL, &p_scan_ctx->scan_buffer));
  1097. return;
  1098. GOTO_CONNECT:
  1099. // If the whitelist is used, do not check the filters and return.
  1100. if (is_whitelist_used(p_scan_ctx))
  1101. {
  1102. scan_evt.scan_evt_id = NRF_BLE_SCAN_EVT_WHITELIST_ADV_REPORT;
  1103. scan_evt.params.p_not_found = p_adv_report;
  1104. p_scan_ctx->evt_handler(&scan_evt);
  1105. UNUSED_RETURN_VALUE(sd_ble_gap_scan_start(NULL, &p_scan_ctx->scan_buffer));
  1106. nrf_ble_scan_connect_with_target(p_scan_ctx, p_adv_report);
  1107. return;
  1108. }
  1109. #if (NRF_BLE_SCAN_FILTER_ENABLE == 1)
  1110. bool const all_filter_mode = p_scan_ctx->scan_filters.all_filters_mode;
  1111. bool is_filter_matched = false;
  1112. #if (NRF_BLE_SCAN_ADDRESS_CNT > 0)
  1113. bool const addr_filter_enabled = p_scan_ctx->scan_filters.addr_filter.addr_filter_enabled;
  1114. #endif
  1115. #if (NRF_BLE_SCAN_NAME_CNT > 0)
  1116. bool const name_filter_enabled = p_scan_ctx->scan_filters.name_filter.name_filter_enabled;
  1117. #endif
  1118. #if (NRF_BLE_SCAN_SHORT_NAME_CNT > 0)
  1119. bool const short_name_filter_enabled =
  1120. p_scan_ctx->scan_filters.short_name_filter.short_name_filter_enabled;
  1121. #endif
  1122. #if (NRF_BLE_SCAN_UUID_CNT > 0)
  1123. bool const uuid_filter_enabled = p_scan_ctx->scan_filters.uuid_filter.uuid_filter_enabled;
  1124. #endif
  1125. #if (NRF_BLE_SCAN_APPEARANCE_CNT > 0)
  1126. bool const appearance_filter_enabled =
  1127. p_scan_ctx->scan_filters.appearance_filter.appearance_filter_enabled;
  1128. #endif
  1129. #if (NRF_BLE_SCAN_ADDRESS_CNT > 0)
  1130. // Check the address filter.
  1131. if (addr_filter_enabled)
  1132. {
  1133. // Number of active filters.
  1134. filter_cnt++;
  1135. if (adv_addr_compare(p_adv_report, p_scan_ctx))
  1136. {
  1137. // Number of filters matched.
  1138. filter_match_cnt++;
  1139. // Information about the filters matched.
  1140. scan_evt.params.filter_match.filter_match.address_filter_match = true;
  1141. is_filter_matched = true;
  1142. }
  1143. }
  1144. #endif
  1145. #if (NRF_BLE_SCAN_NAME_CNT > 0)
  1146. // Check the name filter.
  1147. if (name_filter_enabled)
  1148. {
  1149. filter_cnt++;
  1150. if (adv_name_compare(p_adv_report, p_scan_ctx))
  1151. {
  1152. filter_match_cnt++;
  1153. // Information about the filters matched.
  1154. scan_evt.params.filter_match.filter_match.name_filter_match = true;
  1155. is_filter_matched = true;
  1156. }
  1157. }
  1158. #endif
  1159. #if (NRF_BLE_SCAN_SHORT_NAME_CNT > 0)
  1160. if (short_name_filter_enabled)
  1161. {
  1162. filter_cnt++;
  1163. if (adv_short_name_compare(p_adv_report, p_scan_ctx))
  1164. {
  1165. filter_match_cnt++;
  1166. // Information about the filters matched.
  1167. scan_evt.params.filter_match.filter_match.short_name_filter_match = true;
  1168. is_filter_matched = true;
  1169. }
  1170. }
  1171. #endif
  1172. #if (NRF_BLE_SCAN_UUID_CNT > 0)
  1173. // Check the UUID filter.
  1174. if (uuid_filter_enabled)
  1175. {
  1176. filter_cnt++;
  1177. //if (adv_uuid_compare(p_adv_report, p_scan_ctx))
  1178. {
  1179. filter_match_cnt++;
  1180. // Information about the filters matched.
  1181. scan_evt.params.filter_match.filter_match.uuid_filter_match = true;
  1182. is_filter_matched = true;
  1183. }
  1184. }
  1185. #endif
  1186. #if (NRF_BLE_SCAN_APPEARANCE_CNT > 0)
  1187. // Check the appearance filter.
  1188. if (appearance_filter_enabled)
  1189. {
  1190. filter_cnt++;
  1191. if (adv_appearance_compare(p_adv_report, p_scan_ctx))
  1192. {
  1193. filter_match_cnt++;
  1194. // Information about the filters matched.
  1195. scan_evt.params.filter_match.filter_match.appearance_filter_match = true;
  1196. is_filter_matched = true;
  1197. }
  1198. }
  1199. scan_evt.scan_evt_id = NRF_BLE_SCAN_EVT_NOT_FOUND;
  1200. #endif
  1201. scan_evt.params.filter_match.p_adv_report = p_adv_report;
  1202. // In the multifilter mode, the number of the active filters must equal the number of the filters matched to generate the notification.
  1203. if (all_filter_mode && (filter_match_cnt == filter_cnt))
  1204. {
  1205. scan_evt.scan_evt_id = NRF_BLE_SCAN_EVT_FILTER_MATCH;
  1206. nrf_ble_scan_connect_with_target(p_scan_ctx, p_adv_report);
  1207. }
  1208. // In the normal filter mode, only one filter match is needed to generate the notification to the main application.
  1209. else if ((!all_filter_mode) && is_filter_matched)
  1210. {
  1211. scan_evt.scan_evt_id = NRF_BLE_SCAN_EVT_FILTER_MATCH;
  1212. nrf_ble_scan_connect_with_target(p_scan_ctx, p_adv_report);
  1213. }
  1214. else
  1215. {
  1216. scan_evt.scan_evt_id = NRF_BLE_SCAN_EVT_NOT_FOUND;
  1217. scan_evt.params.p_not_found = p_adv_report;
  1218. }
  1219. // If the event handler is not NULL, notify the main application.
  1220. if (p_scan_ctx->evt_handler != NULL)
  1221. {
  1222. p_scan_ctx->evt_handler(&scan_evt);
  1223. }
  1224. #endif // NRF_BLE_SCAN_FILTER_ENABLE
  1225. // Resume the scanning.
  1226. UNUSED_RETURN_VALUE(sd_ble_gap_scan_start(NULL, &p_scan_ctx->scan_buffer));
  1227. }
  1228. /**@brief Function for checking whether the whitelist is used.
  1229. *
  1230. * @param[in] p_scan_ctx Scanning Module instance.
  1231. */
  1232. bool is_whitelist_used(nrf_ble_scan_t const * const p_scan_ctx)
  1233. {
  1234. if (p_scan_ctx->scan_params.filter_policy == BLE_GAP_SCAN_FP_WHITELIST ||
  1235. p_scan_ctx->scan_params.filter_policy == BLE_GAP_SCAN_FP_WHITELIST_NOT_RESOLVED_DIRECTED)
  1236. {
  1237. return true;
  1238. }
  1239. return false;
  1240. }
  1241. /**@brief Function for restoring the default scanning parameters.
  1242. *
  1243. * @param[out] p_scan_ctx Pointer to the Scanning Module instance.
  1244. */
  1245. static void nrf_ble_scan_default_param_set(nrf_ble_scan_t * const p_scan_ctx)
  1246. {
  1247. // Set the default parameters.
  1248. p_scan_ctx->scan_params.active = 1;
  1249. #if (NRF_SD_BLE_API_VERSION > 7)
  1250. p_scan_ctx->scan_params.interval_us = NRF_BLE_SCAN_SCAN_INTERVAL * UNIT_0_625_MS;
  1251. p_scan_ctx->scan_params.window_us = NRF_BLE_SCAN_SCAN_WINDOW * UNIT_0_625_MS;
  1252. #else
  1253. p_scan_ctx->scan_params.interval = NRF_BLE_SCAN_SCAN_INTERVAL;
  1254. p_scan_ctx->scan_params.window = NRF_BLE_SCAN_SCAN_WINDOW;
  1255. #endif // #if (NRF_SD_BLE_API_VERSION > 7)
  1256. p_scan_ctx->scan_params.timeout = NRF_BLE_SCAN_SCAN_DURATION;
  1257. p_scan_ctx->scan_params.filter_policy = BLE_GAP_SCAN_FP_ACCEPT_ALL;
  1258. p_scan_ctx->scan_params.scan_phys = BLE_GAP_PHY_1MBPS;
  1259. }
  1260. /**@brief Function for setting the default connection parameters.
  1261. *
  1262. * @param[out] p_scan_ctx Pointer to the Scanning Module instance.
  1263. */
  1264. static void nrf_ble_scan_default_conn_param_set(nrf_ble_scan_t * const p_scan_ctx)
  1265. {
  1266. p_scan_ctx->conn_params.conn_sup_timeout =
  1267. (uint16_t)MSEC_TO_UNITS(NRF_BLE_SCAN_SUPERVISION_TIMEOUT, UNIT_10_MS);
  1268. p_scan_ctx->conn_params.min_conn_interval =
  1269. (uint16_t)MSEC_TO_UNITS(NRF_BLE_SCAN_MIN_CONNECTION_INTERVAL, UNIT_1_25_MS);
  1270. p_scan_ctx->conn_params.max_conn_interval =
  1271. (uint16_t)MSEC_TO_UNITS(NRF_BLE_SCAN_MAX_CONNECTION_INTERVAL, UNIT_1_25_MS);
  1272. p_scan_ctx->conn_params.slave_latency =
  1273. (uint16_t)NRF_BLE_SCAN_SLAVE_LATENCY;
  1274. }
  1275. /**@brief Function for calling the BLE_GAP_EVT_TIMEOUT event.
  1276. *
  1277. * @param[in] p_scan_ctx Pointer to the Scanning Module instance.
  1278. * @param[in] p_gap GAP event structure.
  1279. */
  1280. static void nrf_ble_scan_on_timeout(nrf_ble_scan_t const * const p_scan_ctx,
  1281. ble_gap_evt_t const * const p_gap)
  1282. {
  1283. ble_gap_evt_timeout_t const * p_timeout = &p_gap->params.timeout;
  1284. scan_evt_t scan_evt;
  1285. memset(&scan_evt, 0, sizeof(scan_evt));
  1286. if (p_timeout->src == BLE_GAP_TIMEOUT_SRC_SCAN)
  1287. {
  1288. NRF_LOG_DEBUG("BLE_GAP_SCAN_TIMEOUT");
  1289. if (p_scan_ctx->evt_handler != NULL)
  1290. {
  1291. scan_evt.scan_evt_id = NRF_BLE_SCAN_EVT_SCAN_TIMEOUT;
  1292. scan_evt.p_scan_params = &p_scan_ctx->scan_params;
  1293. scan_evt.params.timeout.src = p_timeout->src;
  1294. p_scan_ctx->evt_handler(&scan_evt);
  1295. }
  1296. }
  1297. }
  1298. /**@brief Function for stopping the scanning.
  1299. */
  1300. void nrf_ble_scan_stop(void)
  1301. {
  1302. // It is ok to ignore the function return value here, because this function can return NRF_SUCCESS or
  1303. // NRF_ERROR_INVALID_STATE, when app is not in the scanning state.
  1304. UNUSED_RETURN_VALUE(sd_ble_gap_scan_stop());
  1305. }
  1306. ret_code_t nrf_ble_scan_init(nrf_ble_scan_t * const p_scan_ctx,
  1307. nrf_ble_scan_init_t const * const p_init,
  1308. nrf_ble_scan_evt_handler_t evt_handler)
  1309. {
  1310. VERIFY_PARAM_NOT_NULL(p_scan_ctx);
  1311. p_scan_ctx->evt_handler = evt_handler;
  1312. #if (NRF_BLE_SCAN_FILTER_ENABLE == 1)
  1313. // Disable all scanning filters.
  1314. memset(&p_scan_ctx->scan_filters, 0, sizeof(p_scan_ctx->scan_filters));
  1315. #endif
  1316. // If the pointer to the initialization structure exist, use it to scan the configuration.
  1317. if (p_init != NULL)
  1318. {
  1319. p_scan_ctx->connect_if_match = p_init->connect_if_match;
  1320. p_scan_ctx->conn_cfg_tag = p_init->conn_cfg_tag;
  1321. if (p_init->p_scan_param != NULL)
  1322. {
  1323. p_scan_ctx->scan_params = *p_init->p_scan_param;
  1324. }
  1325. else
  1326. {
  1327. // Use the default static configuration.
  1328. nrf_ble_scan_default_param_set(p_scan_ctx);
  1329. }
  1330. if (p_init->p_conn_param != NULL)
  1331. {
  1332. p_scan_ctx->conn_params = *p_init->p_conn_param;
  1333. }
  1334. else
  1335. {
  1336. // Use the default static configuration.
  1337. nrf_ble_scan_default_conn_param_set(p_scan_ctx);
  1338. }
  1339. }
  1340. // If pointer is NULL, use the static default configuration.
  1341. else
  1342. {
  1343. nrf_ble_scan_default_param_set(p_scan_ctx);
  1344. nrf_ble_scan_default_conn_param_set(p_scan_ctx);
  1345. p_scan_ctx->connect_if_match = false;
  1346. }
  1347. // Assign a buffer where the advertising reports are to be stored by the SoftDevice.
  1348. p_scan_ctx->scan_buffer.p_data = p_scan_ctx->scan_buffer_data;
  1349. p_scan_ctx->scan_buffer.len = NRF_BLE_SCAN_BUFFER;
  1350. return NRF_SUCCESS;
  1351. }
  1352. ret_code_t nrf_ble_scan_start(nrf_ble_scan_t const * const p_scan_ctx)
  1353. {
  1354. VERIFY_PARAM_NOT_NULL(p_scan_ctx);
  1355. ret_code_t err_code;
  1356. scan_evt_t scan_evt;
  1357. memset(&scan_evt, 0, sizeof(scan_evt));
  1358. nrf_ble_scan_stop();
  1359. // If the whitelist is used and the event handler is not NULL, send the whitelist request to the main application.
  1360. if (is_whitelist_used(p_scan_ctx))
  1361. {
  1362. if (p_scan_ctx->evt_handler != NULL)
  1363. {
  1364. scan_evt.scan_evt_id = NRF_BLE_SCAN_EVT_WHITELIST_REQUEST;
  1365. p_scan_ctx->evt_handler(&scan_evt);
  1366. }
  1367. }
  1368. // Start the scanning.
  1369. err_code = sd_ble_gap_scan_start(&p_scan_ctx->scan_params, &p_scan_ctx->scan_buffer);
  1370. // It is okay to ignore this error, because the scan stopped earlier.
  1371. if ((err_code != NRF_ERROR_INVALID_STATE) && (err_code != NRF_SUCCESS))
  1372. {
  1373. NRF_LOG_ERROR("sd_ble_gap_scan_start returned 0x%x", err_code);
  1374. return (err_code);
  1375. }
  1376. NRF_LOG_DEBUG("Scanning");
  1377. return NRF_SUCCESS;
  1378. }
  1379. ret_code_t nrf_ble_scan_params_set(nrf_ble_scan_t * const p_scan_ctx,
  1380. ble_gap_scan_params_t const * const p_scan_param)
  1381. {
  1382. VERIFY_PARAM_NOT_NULL(p_scan_ctx);
  1383. nrf_ble_scan_stop();
  1384. if (p_scan_param != NULL)
  1385. {
  1386. // Assign new scanning parameters.
  1387. p_scan_ctx->scan_params = *p_scan_param;
  1388. }
  1389. else
  1390. {
  1391. // If NULL, use the default static configuration.
  1392. nrf_ble_scan_default_param_set(p_scan_ctx);
  1393. }
  1394. NRF_LOG_DEBUG("Scanning parameters have been changed successfully");
  1395. return NRF_SUCCESS;
  1396. }
  1397. /**@brief Function for calling the BLE_GAP_EVT_CONNECTED event.
  1398. *
  1399. * @param[in] p_scan_ctx Pointer to the Scanning Module instance.
  1400. * @param[in] p_gap_evt GAP event structure.
  1401. */
  1402. static void nrf_ble_scan_on_connected_evt(nrf_ble_scan_t const * const p_scan_ctx,
  1403. ble_gap_evt_t const * const p_gap_evt)
  1404. {
  1405. scan_evt_t scan_evt;
  1406. memset(&scan_evt, 0, sizeof(scan_evt));
  1407. scan_evt.scan_evt_id = NRF_BLE_SCAN_EVT_CONNECTED;
  1408. scan_evt.params.connected.p_connected = &p_gap_evt->params.connected;
  1409. scan_evt.params.connected.conn_handle = p_gap_evt->conn_handle;
  1410. scan_evt.p_scan_params = &p_scan_ctx->scan_params;
  1411. if (p_scan_ctx->evt_handler != NULL)
  1412. {
  1413. p_scan_ctx->evt_handler(&scan_evt);
  1414. }
  1415. }
  1416. ret_code_t nrf_ble_scan_copy_addr_to_sd_gap_addr(ble_gap_addr_t * p_gap_addr,
  1417. const uint8_t addr[BLE_GAP_ADDR_LEN])
  1418. {
  1419. uint16_t addr_type;
  1420. addr_type = nrf_ble_scan_address_type_decode(addr);
  1421. if (addr_type == BLE_ERROR_GAP_INVALID_BLE_ADDR)
  1422. {
  1423. return BLE_ERROR_GAP_INVALID_BLE_ADDR;
  1424. }
  1425. p_gap_addr->addr_type = addr_type;
  1426. for (uint8_t i = 0; i < BLE_GAP_ADDR_LEN; ++i)
  1427. {
  1428. p_gap_addr->addr[i] = addr[BLE_GAP_ADDR_LEN - (i + 1)];
  1429. }
  1430. return NRF_SUCCESS;
  1431. }
  1432. void nrf_ble_scan_on_ble_evt(ble_evt_t const * p_ble_evt, void * p_contex)
  1433. {
  1434. nrf_ble_scan_t * p_scan_data = (nrf_ble_scan_t *)p_contex;
  1435. ble_gap_evt_adv_report_t const * p_adv_report = &p_ble_evt->evt.gap_evt.params.adv_report;
  1436. ble_gap_evt_t const * p_gap_evt = &p_ble_evt->evt.gap_evt;
  1437. switch (p_ble_evt->header.evt_id)
  1438. {
  1439. #if 1
  1440. case BLE_GAP_EVT_DISCONNECTED:
  1441. NRF_LOG_RAW_INFO("<------------------- BLE_GAP_EVT_DISCONNECTED ------------------->\n" );
  1442. break;
  1443. case BLE_GAP_EVT_CONN_PARAM_UPDATE:
  1444. NRF_LOG_RAW_INFO("BLE_GAP_EVT_CONN_PARAM_UPDATE \n" );
  1445. break;
  1446. case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
  1447. NRF_LOG_RAW_INFO("BLE_GAP_EVT_SEC_PARAMS_REQUEST \n" );
  1448. break;
  1449. case BLE_GAP_EVT_SEC_INFO_REQUEST:
  1450. NRF_LOG_RAW_INFO("BLE_GAP_EVT_SEC_INFO_REQUEST \n" );
  1451. break;
  1452. case BLE_GAP_EVT_PASSKEY_DISPLAY:
  1453. NRF_LOG_RAW_INFO("BLE_GAP_EVT_PASSKEY_DISPLAY \n" );
  1454. break;
  1455. case BLE_GAP_EVT_KEY_PRESSED:
  1456. NRF_LOG_RAW_INFO("BLE_GAP_EVT_KEY_PRESSED \n" );
  1457. break;
  1458. case BLE_GAP_EVT_AUTH_KEY_REQUEST:
  1459. NRF_LOG_RAW_INFO("BLE_GAP_EVT_AUTH_KEY_REQUEST \n" );
  1460. break;
  1461. case BLE_GAP_EVT_LESC_DHKEY_REQUEST:
  1462. NRF_LOG_RAW_INFO("BLE_GAP_EVT_LESC_DHKEY_REQUEST \n" );
  1463. break;
  1464. case BLE_GAP_EVT_AUTH_STATUS:
  1465. NRF_LOG_RAW_INFO("BLE_GAP_EVT_AUTH_STATUS \n" );
  1466. break;
  1467. case BLE_GAP_EVT_CONN_SEC_UPDATE:
  1468. NRF_LOG_RAW_INFO("BLE_GAP_EVT_CONN_SEC_UPDATE \n" );
  1469. break;
  1470. case BLE_GAP_EVT_RSSI_CHANGED:
  1471. NRF_LOG_RAW_INFO("BLE_GAP_EVT_RSSI_CHANGED \n" );
  1472. break;
  1473. case BLE_GAP_EVT_SEC_REQUEST:
  1474. NRF_LOG_RAW_INFO("BLE_GAP_EVT_SEC_REQUEST \n" );
  1475. break;
  1476. case BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST:
  1477. NRF_LOG_RAW_INFO("BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST \n" );
  1478. break;
  1479. case BLE_GAP_EVT_PHY_UPDATE_REQUEST:
  1480. NRF_LOG_RAW_INFO("BLE_GAP_EVT_PHY_UPDATE_REQUEST \n" );
  1481. break;
  1482. case BLE_GAP_EVT_PHY_UPDATE:
  1483. NRF_LOG_RAW_INFO("BLE_GAP_EVT_PHY_UPDATE \n" );
  1484. break;
  1485. case BLE_GAP_EVT_DATA_LENGTH_UPDATE_REQUEST:
  1486. NRF_LOG_RAW_INFO("BLE_GAP_EVT_DATA_LENGTH_UPDATE_REQUEST \n" );
  1487. break;
  1488. case BLE_GAP_EVT_DATA_LENGTH_UPDATE:
  1489. NRF_LOG_RAW_INFO("BLE_GAP_EVT_DATA_LENGTH_UPDATE \n" );
  1490. break;
  1491. case BLE_GAP_EVT_QOS_CHANNEL_SURVEY_REPORT:
  1492. NRF_LOG_RAW_INFO("BLE_GAP_EVT_QOS_CHANNEL_SURVEY_REPORT \n" );
  1493. break;
  1494. case BLE_GAP_EVT_ADV_SET_TERMINATED:
  1495. NRF_LOG_RAW_INFO("BLE_GAP_EVT_ADV_SET_TERMINATED \n" );
  1496. break;
  1497. #endif
  1498. case BLE_GAP_EVT_SCAN_REQ_REPORT:
  1499. NRF_LOG_RAW_INFO("BLE_GAP_EVT_SCAN_REQ_REPORT \n" );
  1500. break;
  1501. case BLE_GAP_EVT_ADV_REPORT:
  1502. //NRF_LOG_RAW_INFO("===BLE_GAP_EVT_ADV_REPORT \n" );
  1503. nrf_ble_scan_on_adv_report(p_scan_data, p_adv_report);
  1504. break;
  1505. case BLE_GAP_EVT_TIMEOUT:
  1506. NRF_LOG_RAW_INFO("BLE_GAP_EVT_TIMEOUT \n" );
  1507. nrf_ble_scan_on_timeout(p_scan_data, p_gap_evt);
  1508. break;
  1509. case BLE_GAP_EVT_CONNECTED:
  1510. NRF_LOG_RAW_INFO("<--------------------- BLE_GAP_EVT_CONNECTED ---------------------> \n" );
  1511. nrf_ble_scan_on_connected_evt(p_scan_data, p_gap_evt);
  1512. break;
  1513. default:
  1514. break;
  1515. }
  1516. }
  1517. #endif // NRF_BLE_SCAN_ENABLED