/**
 * Copyright (c) 2015 - 2020, Nordic Semiconductor ASA
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice, this
 *    list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form, except as embedded into a Nordic
 *    Semiconductor ASA integrated circuit in a product or a software update for
 *    such product, must reproduce the above copyright notice, this list of
 *    conditions and the following disclaimer in the documentation and/or other
 *    materials provided with the distribution.
 *
 * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
 *    contributors may be used to endorse or promote products derived from this
 *    software without specific prior written permission.
 *
 * 4. This software, with or without modification, must only be used with a
 *    Nordic Semiconductor ASA integrated circuit.
 *
 * 5. Any software provided in binary form under this license must not be reverse
 *    engineered, decompiled, modified and/or disassembled.
 *
 * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */
#include "sdk_common.h"
#if NRF_MODULE_ENABLED(LED_SOFTBLINK)
#include <string.h>
#include "led_softblink.h"
#include "nrf_gpio.h"
#include "app_timer.h"
#include "nrf_assert.h"
#include "low_power_pwm.h"

/* Period for LED softblink PWM. */
#define PWM_PERIOD UINT8_MAX

/**@bref Structure to handle timer time-outs
 *
 */
typedef struct
{
    bool                    leds_is_on;     /**< Flag for indicating if LEDs are on. */
    bool                    is_counting_up; /**< Flag for indicating if counter is incrementing or decrementing. */
    nrfx_drv_state_t        led_sb_state;   /**< Indicates current state of instance. */
    uint16_t                duty_cycle;     /**< Current pulse width. */
    uint32_t                bit_mask;       /**< Mask of used pins. */
    led_sb_init_params_t    params;         /**< Structure holding initialization parameters. */
    low_power_pwm_config_t  pwm_config;     /**< Structure holding parameters for initializing low level layer. */
    low_power_pwm_t         pwm_instance;   /**< Structure holding low-power PWM instance parameters. */
}led_sb_context_t;

APP_TIMER_DEF(m_led_softblink_timer);

static led_sb_context_t m_led_sb = {0};

/**@brief Timer event handler for softblink.
 *
 * @param[in] p_context            General purpose pointer. Will be passed to the time-out handler
 *                                when the timer expires.
 *
 */
static void led_softblink_on_timeout(void * p_context)
{
    static int32_t pause_ticks;
    ASSERT(m_led_sb.led_sb_state != NRFX_DRV_STATE_UNINITIALIZED);
    ret_code_t err_code;

    if (pause_ticks <= 0)
    {
        if (m_led_sb.is_counting_up)
        {
            if (m_led_sb.duty_cycle >= (m_led_sb.params.duty_cycle_max - m_led_sb.params.duty_cycle_step))
            {
                // Max PWM duty cycle is reached, start decrementing.
                m_led_sb.is_counting_up = false;
                m_led_sb.duty_cycle     = m_led_sb.params.duty_cycle_max;
                pause_ticks = m_led_sb.params.on_time_ticks ? m_led_sb.params.on_time_ticks + APP_TIMER_MIN_TIMEOUT_TICKS : 0;
            }
            else
            {
                m_led_sb.duty_cycle += m_led_sb.params.duty_cycle_step;
            }
        }
        else
        {
            if (m_led_sb.duty_cycle <= (m_led_sb.params.duty_cycle_min + m_led_sb.params.duty_cycle_step))
            {
                // Min PWM duty cycle is reached, start incrementing.
                m_led_sb.is_counting_up = true;
                m_led_sb.duty_cycle     = m_led_sb.params.duty_cycle_min;
                pause_ticks = m_led_sb.params.off_time_ticks ? m_led_sb.params.off_time_ticks + APP_TIMER_MIN_TIMEOUT_TICKS : 0;
            }
            else
            {
                m_led_sb.duty_cycle -= m_led_sb.params.duty_cycle_step;
            }
        }
    }
    else
    {
        pause_ticks -= PWM_PERIOD;
    }

    err_code = low_power_pwm_duty_set(&m_led_sb.pwm_instance, m_led_sb.duty_cycle);

    APP_ERROR_CHECK(err_code);
}


ret_code_t led_softblink_init(led_sb_init_params_t const * p_init_params)
{
    ret_code_t err_code;

    ASSERT(m_led_sb.led_sb_state == NRFX_DRV_STATE_UNINITIALIZED);
    ASSERT(p_init_params);

    if ( (p_init_params->duty_cycle_max == 0)                               ||
         (p_init_params->duty_cycle_max <= p_init_params->duty_cycle_min)   ||
         (p_init_params->duty_cycle_step == 0)                              ||
         (p_init_params->leds_pin_bm == 0))
    {
        return NRF_ERROR_INVALID_PARAM;
    }



    memset(&m_led_sb, 0, sizeof(led_sb_context_t));
    memcpy(&m_led_sb.params, p_init_params, sizeof(led_sb_init_params_t));

    m_led_sb.is_counting_up = true;
    m_led_sb.duty_cycle     = p_init_params->duty_cycle_min + p_init_params->duty_cycle_step;
    m_led_sb.leds_is_on     = false;
    m_led_sb.bit_mask       = p_init_params->leds_pin_bm;

    m_led_sb.pwm_config.active_high         = m_led_sb.params.active_high;
    m_led_sb.pwm_config.bit_mask            = p_init_params->leds_pin_bm;
    m_led_sb.pwm_config.p_port              = p_init_params->p_leds_port;
    m_led_sb.pwm_config.period              = PWM_PERIOD;
    m_led_sb.pwm_config.p_timer_id          = &m_led_softblink_timer;

    err_code = low_power_pwm_init( &m_led_sb.pwm_instance, &m_led_sb.pwm_config, led_softblink_on_timeout);

    if (err_code == NRF_SUCCESS)
    {
        m_led_sb.led_sb_state = NRFX_DRV_STATE_INITIALIZED;
    }
    else
    {
        return err_code;
    }

    err_code = low_power_pwm_duty_set( &m_led_sb.pwm_instance, p_init_params->duty_cycle_min + p_init_params->duty_cycle_step);

    return err_code;
}


ret_code_t led_softblink_start(uint32_t leds_pin_bit_mask)
{
    ret_code_t err_code;

    ASSERT(m_led_sb.led_sb_state == NRFX_DRV_STATE_INITIALIZED);

    err_code = low_power_pwm_start(&m_led_sb.pwm_instance, leds_pin_bit_mask);

    return err_code;
}


ret_code_t led_softblink_stop(void)
{
    ret_code_t err_code;

    err_code = low_power_pwm_stop(&m_led_sb.pwm_instance);

    return err_code;
}


void led_softblink_off_time_set(uint32_t off_time_ticks)
{
    ASSERT(m_led_sb.led_sb_state != NRFX_DRV_STATE_UNINITIALIZED);

    m_led_sb.params.off_time_ticks = off_time_ticks;
}


void led_softblink_on_time_set(uint32_t on_time_ticks)
{
    ASSERT(m_led_sb.led_sb_state != NRFX_DRV_STATE_UNINITIALIZED);

    m_led_sb.params.on_time_ticks = on_time_ticks;
}


ret_code_t led_softblink_uninit(void)
{
    ASSERT(m_led_sb.led_sb_state != NRFX_DRV_STATE_UNINITIALIZED);

    ret_code_t err_code;

    err_code = led_softblink_stop();

    if (err_code == NRF_SUCCESS)
    {
        m_led_sb.led_sb_state = NRFX_DRV_STATE_UNINITIALIZED;
    }
    else
    {
        return err_code;
    }

    memset(&m_led_sb, 0, sizeof(m_led_sb));

    return NRF_SUCCESS;
}
#endif //NRF_MODULE_ENABLED(LED_SOFTBLINK)