Explorar el Código

src all from suhoimage

astrodom hace 2 años
commit
8ad24bef78
Se han modificado 100 ficheros con 5307 adiciones y 0 borrados
  1. 5262 0
      IES-600RB-Bootloader.si4project/Backup/sdk_config(7297).h
  2. 7 0
      IES-600RB-Bootloader.si4project/IES-600RB-BootLoader.snippets.xml
  3. 9 0
      IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.SearchResults
  4. 7 0
      IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.bookmarks.xml
  5. BIN
      IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.sip_sym
  6. BIN
      IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.sip_xab
  7. BIN
      IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.sip_xad
  8. BIN
      IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.sip_xc
  9. BIN
      IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.sip_xf
  10. BIN
      IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.sip_xm
  11. BIN
      IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.sip_xr
  12. BIN
      IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.sip_xsb
  13. BIN
      IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.sip_xsd
  14. BIN
      IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.siproj
  15. 22 0
      IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.siproj_settings.xml
  16. BIN
      IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.siwork
  17. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_atomic.h.sisc
  18. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_clock.h.sisc
  19. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_debug_interface.h.sisc
  20. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_delay.h.sisc
  21. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_led.h.sisc
  22. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_mutex.h.sisc
  23. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_rng.h.sisc
  24. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_sleep.h.sisc
  25. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_task_scheduler.h.sisc
  26. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_timer.h.sisc
  27. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_timer_critical.h.sisc
  28. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_trace_interface.h.sisc
  29. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_uart.h.sisc
  30. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_uart_task_scheduler.h.sisc
  31. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_nrf52_soc_hal_nrf52_exceptions.h.sisc
  32. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_nrf52_soc_hal_nrf52_rtc.h.sisc
  33. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_nrf52_soc_hal_nrf52_timer.h.sisc
  34. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_auto_request.h.sisc
  35. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_common.h.sisc
  36. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mcps_data.h.sisc
  37. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mcps_purge.h.sisc
  38. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_associate.h.sisc
  39. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_beacon_notify.h.sisc
  40. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_comm_status.h.sisc
  41. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_disassociate.h.sisc
  42. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_gts.h.sisc
  43. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_orphan.h.sisc
  44. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_pib.h.sisc
  45. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_poll.h.sisc
  46. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_reset.h.sisc
  47. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_rx_enable.h.sisc
  48. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_scan.h.sisc
  49. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_start.h.sisc
  50. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_sync.h.sisc
  51. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_panid_conflict.h.sisc
  52. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_security.h.sisc
  53. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_task_scheduler.h.sisc
  54. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_time.h.sisc
  55. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_PHY_phy_common.h.sisc
  56. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_PHY_phy_pd_data.h.sisc
  57. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_PHY_phy_plme_cca.h.sisc
  58. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_PHY_phy_plme_ed.h.sisc
  59. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_PHY_phy_plme_pib.h.sisc
  60. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_PHY_phy_plme_trx.h.sisc
  61. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_RAL_nrf52_soc_ral_api_spec.h.sisc
  62. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_RAL_nrf52_soc_ral_fsm.h.sisc
  63. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_RAL_nrf52_soc_ral_fsm_private.h.sisc
  64. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_RAL_nrf52_soc_ral_irq_handlers.h.sisc
  65. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_RAL_nrf52_soc_ral_rf_init.h.sisc
  66. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_RAL_ral_api.h.sisc
  67. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SecAL_sec_aes_ccm.h.sisc
  68. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SecAL_sec_aes_entity.h.sisc
  69. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_crc.h.sisc
  70. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_debug.h.sisc
  71. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_events.h.sisc
  72. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_fsm.h.sisc
  73. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_init.h.sisc
  74. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_list.h.sisc
  75. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_memory_manager.h.sisc
  76. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_queue.h.sisc
  77. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_ringbuffer.h.sisc
  78. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_slab_allocator.h.sisc
  79. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_sleep.h.sisc
  80. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_task_scheduler.h.sisc
  81. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_time.h.sisc
  82. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_utils.h.sisc
  83. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_raw_802_15_4_config.h.sisc
  84. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_secure_802_15_4_config.h.sisc
  85. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_src_rng_entity.c.sisc
  86. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_src_sec_aes_entity.c.sisc
  87. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_channel_config_ant_channel_config.c.sisc
  88. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_channel_config_ant_channel_config.h.sisc
  89. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_encryption_ant_encrypt_config.c.sisc
  90. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_encryption_ant_encrypt_config.h.sisc
  91. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_encryption_ant_encrypt_negotiation_slave.c.sisc
  92. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_encryption_ant_encrypt_negotiation_slave.h.sisc
  93. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_fs_antfs.c.sisc
  94. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_fs_antfs.h.sisc
  95. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_fs_crc.c.sisc
  96. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_fs_crc.h.sisc
  97. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_fs_defines.h.sisc
  98. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_key_manager_ant_key_manager.c.sisc
  99. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_key_manager_ant_key_manager.h.sisc
  100. BIN
      IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_key_manager_config_ant_key_manager_config.h.sisc

+ 5262 - 0
IES-600RB-Bootloader.si4project/Backup/sdk_config(7297).h

@@ -0,0 +1,5262 @@
+/**
+ * Copyright (c) 2017 - 2020, Nordic Semiconductor ASA
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form, except as embedded into a Nordic
+ *    Semiconductor ASA integrated circuit in a product or a software update for
+ *    such product, must reproduce the above copyright notice, this list of
+ *    conditions and the following disclaimer in the documentation and/or other
+ *    materials provided with the distribution.
+ *
+ * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ *
+ * 4. This software, with or without modification, must only be used with a
+ *    Nordic Semiconductor ASA integrated circuit.
+ *
+ * 5. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
+ * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+ * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+
+
+#ifndef SDK_CONFIG_H
+#define SDK_CONFIG_H
+// <<< Use Configuration Wizard in Context Menu >>>\n
+#ifdef USE_APP_CONFIG
+#include "app_config.h"
+#endif
+// <h> nRF_Bootloader 
+
+//==========================================================
+// <h> nrf_bootloader - Bootloader settings
+
+//==========================================================
+// <h> Application integrity checks 
+
+//==========================================================
+// <q> NRF_BL_APP_CRC_CHECK_SKIPPED_ON_GPREGRET2  - Skip CRC integrity check of the application when bit 1 (0-indexed) is set in the GPREGRET2 register.
+ 
+
+// <i> Only CRC checks can be skipped. For other boot validation types, the GPREGRET2 register is ignored.
+
+#ifndef NRF_BL_APP_CRC_CHECK_SKIPPED_ON_GPREGRET2
+#define NRF_BL_APP_CRC_CHECK_SKIPPED_ON_GPREGRET2 1
+#endif
+
+// <q> NRF_BL_APP_CRC_CHECK_SKIPPED_ON_SYSTEMOFF_RESET  - Skip integrity check of the application when waking up from the System Off state.
+ 
+
+// <i> Only CRC checks can be skipped. For other boot validation types, the reset state is ignored.
+
+#ifndef NRF_BL_APP_CRC_CHECK_SKIPPED_ON_SYSTEMOFF_RESET
+#define NRF_BL_APP_CRC_CHECK_SKIPPED_ON_SYSTEMOFF_RESET 1
+#endif
+
+// <q> NRF_BL_APP_SIGNATURE_CHECK_REQUIRED  - Perform signature check on the app. Requires the signature to be sent in the init packet.
+ 
+
+#ifndef NRF_BL_APP_SIGNATURE_CHECK_REQUIRED
+#define NRF_BL_APP_SIGNATURE_CHECK_REQUIRED 0
+#endif
+
+// <q> NRF_BL_DFU_ALLOW_UPDATE_FROM_APP  - Whether to allow the app to receive firmware updates for the bootloader to activate.
+ 
+
+// <i> Enable this to allow the app to instruct the bootloader to activate firmware.
+// <i> The bootloader will do its own postvalidation.
+
+#ifndef NRF_BL_DFU_ALLOW_UPDATE_FROM_APP
+#define NRF_BL_DFU_ALLOW_UPDATE_FROM_APP 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> DFU mode enter method 
+
+//==========================================================
+// <e> NRF_BL_DFU_ENTER_METHOD_BUTTON - Enter DFU mode on button press.
+//==========================================================
+#ifndef NRF_BL_DFU_ENTER_METHOD_BUTTON
+#define NRF_BL_DFU_ENTER_METHOD_BUTTON 1
+#endif
+// <o> NRF_BL_DFU_ENTER_METHOD_BUTTON_PIN  - Button for entering DFU mode.
+ 
+// <0=> 0 (P0.0) 
+// <1=> 1 (P0.1) 
+// <2=> 2 (P0.2) 
+// <3=> 3 (P0.3) 
+// <4=> 4 (P0.4) 
+// <5=> 5 (P0.5) 
+// <6=> 6 (P0.6) 
+// <7=> 7 (P0.7) 
+// <8=> 8 (P0.8) 
+// <9=> 9 (P0.9) 
+// <10=> 10 (P0.10) 
+// <11=> 11 (P0.11) 
+// <12=> 12 (P0.12) 
+// <13=> 13 (P0.13) 
+// <14=> 14 (P0.14) 
+// <15=> 15 (P0.15) 
+// <16=> 16 (P0.16) 
+// <17=> 17 (P0.17) 
+// <18=> 18 (P0.18) 
+// <19=> 19 (P0.19) 
+// <20=> 20 (P0.20) 
+// <21=> 21 (P0.21) 
+// <22=> 22 (P0.22) 
+// <23=> 23 (P0.23) 
+// <24=> 24 (P0.24) 
+// <25=> 25 (P0.25) 
+// <26=> 26 (P0.26) 
+// <27=> 27 (P0.27) 
+// <28=> 28 (P0.28) 
+// <29=> 29 (P0.29) 
+// <30=> 30 (P0.30) 
+// <31=> 31 (P0.31) 
+
+#ifndef NRF_BL_DFU_ENTER_METHOD_BUTTON_PIN
+#define NRF_BL_DFU_ENTER_METHOD_BUTTON_PIN 16
+#endif
+
+// </e>
+
+// <q> NRF_BL_DFU_ENTER_METHOD_PINRESET  - Enter DFU mode on pin reset.
+ 
+
+#ifndef NRF_BL_DFU_ENTER_METHOD_PINRESET
+#define NRF_BL_DFU_ENTER_METHOD_PINRESET 0
+#endif
+
+// <q> NRF_BL_DFU_ENTER_METHOD_GPREGRET  - Enter DFU mode when bit 0 is set in the NRF_POWER_GPREGRET register.
+ 
+
+#ifndef NRF_BL_DFU_ENTER_METHOD_GPREGRET
+#define NRF_BL_DFU_ENTER_METHOD_GPREGRET 1
+#endif
+
+// <q> NRF_BL_DFU_ENTER_METHOD_BUTTONLESS  - Enter DFU mode when the Boolean enter_buttonless_dfu in DFU settings is true.
+ 
+
+#ifndef NRF_BL_DFU_ENTER_METHOD_BUTTONLESS
+#define NRF_BL_DFU_ENTER_METHOD_BUTTONLESS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> DFU timers 
+
+//==========================================================
+// <o> NRF_BL_DFU_CONTINUATION_TIMEOUT_MS - Timeout in ms when expecting an update immediately.  <100-60000000> 
+
+
+// <i> This timeout is used after updating the SoftDevice, when there is
+// <i> already a valid application present. The bootloader will enter DFU mode
+// <i> for a short time instead of booting the old application to allow the host
+// <i> to immediately transfer a new application if it wishes.
+
+#ifndef NRF_BL_DFU_CONTINUATION_TIMEOUT_MS
+#define NRF_BL_DFU_CONTINUATION_TIMEOUT_MS 10000
+#endif
+
+// <o> NRF_BL_DFU_INACTIVITY_TIMEOUT_MS - Timeout in ms before automatically starting a valid application due to inactivity.  <0-60000000> 
+
+
+// <i> If 0, no inactivity timer will be used. Values 1-99 are invalid.
+
+#ifndef NRF_BL_DFU_INACTIVITY_TIMEOUT_MS
+//#define NRF_BL_DFU_INACTIVITY_TIMEOUT_MS 120000
+#define NRF_BL_DFU_INACTIVITY_TIMEOUT_MS 90000
+
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Watchdog timer 
+
+//==========================================================
+// <o> NRF_BL_WDT_MAX_SCHEDULER_LATENCY_MS - Maximum latency of the scheduler in miliseconds 
+// <i> Maximum latency of the scheduler is compared with
+// <i> watchdog counter reload value (CRV). If latency is big
+// <i> enough, the watchdog will be fed from internal timer
+// <i> handler along with feed from user function. If latency
+// <i> is smaller than CRV, the watchdog will not be internally fed once
+// <i> it will be externally fed. Maximum latency is mainly affected
+// <i> by flash operations.
+
+#ifndef NRF_BL_WDT_MAX_SCHEDULER_LATENCY_MS
+#define NRF_BL_WDT_MAX_SCHEDULER_LATENCY_MS 10000
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Misc Bootloader settings 
+
+//==========================================================
+// <q> NRF_BL_DEBUG_PORT_DISABLE  - Disable access to the chip via the debug port.
+ 
+
+// <i> Disable access to the chip via the debug port.
+// <i> This modifies the APPROTECT and DEBUGCTRL registers.
+// <i> Enable this option in production code if such
+// <i> access should be prohibited. Read about the registers
+// <i> for more details.
+
+#ifndef NRF_BL_DEBUG_PORT_DISABLE
+#define NRF_BL_DEBUG_PORT_DISABLE 0
+#endif
+
+// <o> NRF_BL_FW_COPY_PROGRESS_STORE_STEP - Number of pages copied after which progress in the settings page is updated. 
+// <i> Progress stored in the settings page allows the bootloader to resume
+// <i> copying the new firmware in case of interruption (reset).
+// <i> If the value is small, then the resume point is more accurate. However,
+// <i>  it also impacts negatively on flash wear.
+
+#ifndef NRF_BL_FW_COPY_PROGRESS_STORE_STEP
+#define NRF_BL_FW_COPY_PROGRESS_STORE_STEP 8
+#endif
+
+// <o> NRF_BL_RESET_DELAY_MS - Time to wait before resetting the bootloader. 
+// <i> Time (in ms) to wait before resetting the bootloader after DFU has been completed or aborted. This allows more time for e.g. disconnecting the BLE link or writing logs.
+
+#ifndef NRF_BL_RESET_DELAY_MS
+#define NRF_BL_RESET_DELAY_MS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Crypto 
+
+//==========================================================
+// <e> NRF_CRYPTO_ENABLED - nrf_crypto - Cryptography library.
+//==========================================================
+#ifndef NRF_CRYPTO_ENABLED
+#define NRF_CRYPTO_ENABLED 1
+#endif
+// <o> NRF_CRYPTO_ALLOCATOR  - Memory allocator
+ 
+
+// <i> Choose memory allocator used by nrf_crypto. Default is alloca if possible or nrf_malloc otherwise. If 'User macros' are selected, the user has to create 'nrf_crypto_allocator.h' file that contains NRF_CRYPTO_ALLOC, NRF_CRYPTO_FREE, and NRF_CRYPTO_ALLOC_ON_STACK.
+// <0=> Default 
+// <1=> User macros 
+// <2=> On stack (alloca) 
+// <3=> C dynamic memory (malloc) 
+// <4=> SDK Memory Manager (nrf_malloc) 
+
+#ifndef NRF_CRYPTO_ALLOCATOR
+#define NRF_CRYPTO_ALLOCATOR 1
+#endif
+
+// <e> NRF_CRYPTO_BACKEND_CC310_BL_ENABLED - Enable the ARM Cryptocell CC310 reduced backend.
+
+// <i> The CC310 hardware-accelerated cryptography backend with reduced functionality and footprint (only available on nRF52840).
+//==========================================================
+#ifndef NRF_CRYPTO_BACKEND_CC310_BL_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_BL_ENABLED 0
+#endif
+// <q> NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP224R1_ENABLED  - Enable the secp224r1 elliptic curve support using CC310_BL.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP224R1_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP224R1_ENABLED 0
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP256R1_ENABLED  - Enable the secp256r1 elliptic curve support using CC310_BL.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP256R1_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP256R1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_BL_HASH_SHA256_ENABLED  - CC310_BL SHA-256 hash functionality.
+ 
+
+// <i> CC310_BL backend implementation for hardware-accelerated SHA-256.
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_BL_HASH_SHA256_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_BL_HASH_SHA256_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_ENABLED  - nrf_cc310_bl buffers to RAM before running hash operation
+ 
+
+// <i> Enabling this makes hashing of addresses in FLASH range possible. Size of buffer allocated for hashing is set by NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_ENABLED 0
+#endif
+
+// <o> NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE - nrf_cc310_bl hash outputs digests in little endian 
+// <i> Makes the nrf_cc310_bl hash functions output digests in little endian format. Only for use in nRF SDK DFU!
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE
+#define NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE 4096
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_BL_INTERRUPTS_ENABLED  - Enable Interrupts while support using CC310 bl.
+ 
+
+// <i> Select a library version compatible with the configuration. When interrupts are disable, a version named _noint must be used
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_BL_INTERRUPTS_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_BL_INTERRUPTS_ENABLED 1
+#endif
+
+// </e>
+
+// <e> NRF_CRYPTO_BACKEND_CC310_ENABLED - Enable the ARM Cryptocell CC310 backend.
+
+// <i> The CC310 hardware-accelerated cryptography backend (only available on nRF52840).
+//==========================================================
+#ifndef NRF_CRYPTO_BACKEND_CC310_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_ENABLED 0
+#endif
+// <q> NRF_CRYPTO_BACKEND_CC310_AES_CBC_ENABLED  - Enable the AES CBC mode using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CBC_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_AES_CBC_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_AES_CTR_ENABLED  - Enable the AES CTR mode using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CTR_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_AES_CTR_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_AES_ECB_ENABLED  - Enable the AES ECB mode using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_AES_ECB_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_AES_ECB_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_AES_CBC_MAC_ENABLED  - Enable the AES CBC_MAC mode using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CBC_MAC_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_AES_CBC_MAC_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_AES_CMAC_ENABLED  - Enable the AES CMAC mode using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CMAC_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_AES_CMAC_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_AES_CCM_ENABLED  - Enable the AES CCM mode using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CCM_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_AES_CCM_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_AES_CCM_STAR_ENABLED  - Enable the AES CCM* mode using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CCM_STAR_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_AES_CCM_STAR_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_CHACHA_POLY_ENABLED  - Enable the CHACHA-POLY mode using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_CHACHA_POLY_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_CHACHA_POLY_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R1_ENABLED  - Enable the secp160r1 elliptic curve support using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R1_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R2_ENABLED  - Enable the secp160r2 elliptic curve support using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R2_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R2_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP192R1_ENABLED  - Enable the secp192r1 elliptic curve support using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP192R1_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP192R1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP224R1_ENABLED  - Enable the secp224r1 elliptic curve support using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP224R1_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP224R1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP256R1_ENABLED  - Enable the secp256r1 elliptic curve support using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP256R1_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP256R1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP384R1_ENABLED  - Enable the secp384r1 elliptic curve support using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP384R1_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP384R1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP521R1_ENABLED  - Enable the secp521r1 elliptic curve support using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP521R1_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP521R1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP160K1_ENABLED  - Enable the secp160k1 elliptic curve support using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP160K1_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP160K1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP192K1_ENABLED  - Enable the secp192k1 elliptic curve support using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP192K1_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP192K1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP224K1_ENABLED  - Enable the secp224k1 elliptic curve support using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP224K1_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP224K1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP256K1_ENABLED  - Enable the secp256k1 elliptic curve support using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP256K1_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP256K1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_ECC_CURVE25519_ENABLED  - Enable the Curve25519 curve support using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_CURVE25519_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_ECC_CURVE25519_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_ECC_ED25519_ENABLED  - Enable the Ed25519 curve support using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_ED25519_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_ECC_ED25519_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_HASH_SHA256_ENABLED  - CC310 SHA-256 hash functionality.
+ 
+
+// <i> CC310 backend implementation for hardware-accelerated SHA-256.
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_HASH_SHA256_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_HASH_SHA256_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_HASH_SHA512_ENABLED  - CC310 SHA-512 hash functionality
+ 
+
+// <i> CC310 backend implementation for SHA-512 (in software).
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_HASH_SHA512_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_HASH_SHA512_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_HMAC_SHA256_ENABLED  - CC310 HMAC using SHA-256
+ 
+
+// <i> CC310 backend implementation for HMAC using hardware-accelerated SHA-256.
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_HMAC_SHA256_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_HMAC_SHA256_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_HMAC_SHA512_ENABLED  - CC310 HMAC using SHA-512
+ 
+
+// <i> CC310 backend implementation for HMAC using SHA-512 (in software).
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_HMAC_SHA512_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_HMAC_SHA512_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_RNG_ENABLED  - Enable RNG support using CC310.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_RNG_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_RNG_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_CC310_INTERRUPTS_ENABLED  - Enable Interrupts while support using CC310.
+ 
+
+// <i> Select a library version compatible with the configuration. When interrupts are disable, a version named _noint must be used
+
+#ifndef NRF_CRYPTO_BACKEND_CC310_INTERRUPTS_ENABLED
+#define NRF_CRYPTO_BACKEND_CC310_INTERRUPTS_ENABLED 1
+#endif
+
+// </e>
+
+// <e> NRF_CRYPTO_BACKEND_CIFRA_ENABLED - Enable the Cifra backend.
+//==========================================================
+#ifndef NRF_CRYPTO_BACKEND_CIFRA_ENABLED
+#define NRF_CRYPTO_BACKEND_CIFRA_ENABLED 0
+#endif
+// <q> NRF_CRYPTO_BACKEND_CIFRA_AES_EAX_ENABLED  - Enable the AES EAX mode using Cifra.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_CIFRA_AES_EAX_ENABLED
+#define NRF_CRYPTO_BACKEND_CIFRA_AES_EAX_ENABLED 1
+#endif
+
+// </e>
+
+// <e> NRF_CRYPTO_BACKEND_MBEDTLS_ENABLED - Enable the mbed TLS backend.
+//==========================================================
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_ENABLED 0
+#endif
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_ENABLED  - Enable the AES CBC mode mbed TLS.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CTR_ENABLED  - Enable the AES CTR mode using mbed TLS.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CTR_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CTR_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CFB_ENABLED  - Enable the AES CFB mode using mbed TLS.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CFB_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CFB_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_ECB_ENABLED  - Enable the AES ECB mode using mbed TLS.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_ECB_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_ECB_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_MAC_ENABLED  - Enable the AES CBC MAC mode using mbed TLS.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_MAC_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_MAC_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CMAC_ENABLED  - Enable the AES CMAC mode using mbed TLS.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CMAC_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CMAC_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CCM_ENABLED  - Enable the AES CCM mode using mbed TLS.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CCM_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CCM_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_GCM_ENABLED  - Enable the AES GCM mode using mbed TLS.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_GCM_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_GCM_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192R1_ENABLED  - Enable secp192r1 (NIST 192-bit) curve
+ 
+
+// <i> Enable this setting if you need secp192r1 (NIST 192-bit) support using MBEDTLS
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192R1_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192R1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224R1_ENABLED  - Enable secp224r1 (NIST 224-bit) curve
+ 
+
+// <i> Enable this setting if you need secp224r1 (NIST 224-bit) support using MBEDTLS
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224R1_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224R1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256R1_ENABLED  - Enable secp256r1 (NIST 256-bit) curve
+ 
+
+// <i> Enable this setting if you need secp256r1 (NIST 256-bit) support using MBEDTLS
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256R1_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256R1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP384R1_ENABLED  - Enable secp384r1 (NIST 384-bit) curve
+ 
+
+// <i> Enable this setting if you need secp384r1 (NIST 384-bit) support using MBEDTLS
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP384R1_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP384R1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP521R1_ENABLED  - Enable secp521r1 (NIST 521-bit) curve
+ 
+
+// <i> Enable this setting if you need secp521r1 (NIST 521-bit) support using MBEDTLS
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP521R1_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP521R1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192K1_ENABLED  - Enable secp192k1 (Koblitz 192-bit) curve
+ 
+
+// <i> Enable this setting if you need secp192k1 (Koblitz 192-bit) support using MBEDTLS
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192K1_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192K1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224K1_ENABLED  - Enable secp224k1 (Koblitz 224-bit) curve
+ 
+
+// <i> Enable this setting if you need secp224k1 (Koblitz 224-bit) support using MBEDTLS
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224K1_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224K1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256K1_ENABLED  - Enable secp256k1 (Koblitz 256-bit) curve
+ 
+
+// <i> Enable this setting if you need secp256k1 (Koblitz 256-bit) support using MBEDTLS
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256K1_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256K1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP256R1_ENABLED  - Enable bp256r1 (Brainpool 256-bit) curve
+ 
+
+// <i> Enable this setting if you need bp256r1 (Brainpool 256-bit) support using MBEDTLS
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP256R1_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP256R1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP384R1_ENABLED  - Enable bp384r1 (Brainpool 384-bit) curve
+ 
+
+// <i> Enable this setting if you need bp384r1 (Brainpool 384-bit) support using MBEDTLS
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP384R1_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP384R1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP512R1_ENABLED  - Enable bp512r1 (Brainpool 512-bit) curve
+ 
+
+// <i> Enable this setting if you need bp512r1 (Brainpool 512-bit) support using MBEDTLS
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP512R1_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP512R1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_CURVE25519_ENABLED  - Enable Curve25519 curve
+ 
+
+// <i> Enable this setting if you need Curve25519 support using MBEDTLS
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_CURVE25519_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_CURVE25519_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA256_ENABLED  - Enable mbed TLS SHA-256 hash functionality.
+ 
+
+// <i> mbed TLS backend implementation for SHA-256.
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA256_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA256_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA512_ENABLED  - Enable mbed TLS SHA-512 hash functionality.
+ 
+
+// <i> mbed TLS backend implementation for SHA-512.
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA512_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA512_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA256_ENABLED  - Enable mbed TLS HMAC using SHA-256.
+ 
+
+// <i> mbed TLS backend implementation for HMAC using SHA-256.
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA256_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA256_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA512_ENABLED  - Enable mbed TLS HMAC using SHA-512.
+ 
+
+// <i> mbed TLS backend implementation for HMAC using SHA-512.
+
+#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA512_ENABLED
+#define NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA512_ENABLED 1
+#endif
+
+// </e>
+
+// <e> NRF_CRYPTO_BACKEND_MICRO_ECC_ENABLED - Enable the micro-ecc backend.
+//==========================================================
+#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ENABLED
+#define NRF_CRYPTO_BACKEND_MICRO_ECC_ENABLED 1
+#endif
+// <q> NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP192R1_ENABLED  - Enable secp192r1 (NIST 192-bit) curve
+ 
+
+// <i> Enable this setting if you need secp192r1 (NIST 192-bit) support using micro-ecc
+
+#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP192R1_ENABLED
+#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP192R1_ENABLED 0
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP224R1_ENABLED  - Enable secp224r1 (NIST 224-bit) curve
+ 
+
+// <i> Enable this setting if you need secp224r1 (NIST 224-bit) support using micro-ecc
+
+#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP224R1_ENABLED
+#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP224R1_ENABLED 0
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256R1_ENABLED  - Enable secp256r1 (NIST 256-bit) curve
+ 
+
+// <i> Enable this setting if you need secp256r1 (NIST 256-bit) support using micro-ecc
+
+#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256R1_ENABLED
+#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256R1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256K1_ENABLED  - Enable secp256k1 (Koblitz 256-bit) curve
+ 
+
+// <i> Enable this setting if you need secp256k1 (Koblitz 256-bit) support using micro-ecc
+
+#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256K1_ENABLED
+#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256K1_ENABLED 0
+#endif
+
+// </e>
+
+// <e> NRF_CRYPTO_BACKEND_NRF_HW_RNG_ENABLED - Enable the nRF HW RNG backend.
+
+// <i> The nRF HW backend provide access to RNG peripheral in nRF5x devices.
+//==========================================================
+#ifndef NRF_CRYPTO_BACKEND_NRF_HW_RNG_ENABLED
+#define NRF_CRYPTO_BACKEND_NRF_HW_RNG_ENABLED 0
+#endif
+// <q> NRF_CRYPTO_BACKEND_NRF_HW_RNG_MBEDTLS_CTR_DRBG_ENABLED  - Enable mbed TLS CTR-DRBG algorithm.
+ 
+
+// <i> Enable mbed TLS CTR-DRBG standardized by NIST (NIST SP 800-90A Rev. 1). The nRF HW RNG is used as an entropy source for seeding.
+
+#ifndef NRF_CRYPTO_BACKEND_NRF_HW_RNG_MBEDTLS_CTR_DRBG_ENABLED
+#define NRF_CRYPTO_BACKEND_NRF_HW_RNG_MBEDTLS_CTR_DRBG_ENABLED 1
+#endif
+
+// </e>
+
+// <e> NRF_CRYPTO_BACKEND_NRF_SW_ENABLED - Enable the legacy nRFx sw for crypto.
+
+// <i> The nRF SW cryptography backend (only used in bootloader context).
+//==========================================================
+#ifndef NRF_CRYPTO_BACKEND_NRF_SW_ENABLED
+#define NRF_CRYPTO_BACKEND_NRF_SW_ENABLED 1
+#endif
+// <q> NRF_CRYPTO_BACKEND_NRF_SW_HASH_SHA256_ENABLED  - nRF SW hash backend support for SHA-256
+ 
+
+// <i> The nRF SW backend provide access to nRF SDK legacy hash implementation of SHA-256.
+
+#ifndef NRF_CRYPTO_BACKEND_NRF_SW_HASH_SHA256_ENABLED
+#define NRF_CRYPTO_BACKEND_NRF_SW_HASH_SHA256_ENABLED 1
+#endif
+
+// </e>
+
+// <e> NRF_CRYPTO_BACKEND_OBERON_ENABLED - Enable the Oberon backend
+
+// <i> The Oberon backend
+//==========================================================
+#ifndef NRF_CRYPTO_BACKEND_OBERON_ENABLED
+#define NRF_CRYPTO_BACKEND_OBERON_ENABLED 0
+#endif
+// <q> NRF_CRYPTO_BACKEND_OBERON_CHACHA_POLY_ENABLED  - Enable the CHACHA-POLY mode using Oberon.
+ 
+
+#ifndef NRF_CRYPTO_BACKEND_OBERON_CHACHA_POLY_ENABLED
+#define NRF_CRYPTO_BACKEND_OBERON_CHACHA_POLY_ENABLED 0
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_OBERON_ECC_SECP256R1_ENABLED  - Enable secp256r1 curve
+ 
+
+// <i> Enable this setting if you need secp256r1 curve support using Oberon library
+
+#ifndef NRF_CRYPTO_BACKEND_OBERON_ECC_SECP256R1_ENABLED
+#define NRF_CRYPTO_BACKEND_OBERON_ECC_SECP256R1_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_OBERON_ECC_CURVE25519_ENABLED  - Enable Curve25519 ECDH
+ 
+
+// <i> Enable this setting if you need Curve25519 ECDH support using Oberon library
+
+#ifndef NRF_CRYPTO_BACKEND_OBERON_ECC_CURVE25519_ENABLED
+#define NRF_CRYPTO_BACKEND_OBERON_ECC_CURVE25519_ENABLED 0
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_OBERON_ECC_ED25519_ENABLED  - Enable Ed25519 signature scheme
+ 
+
+// <i> Enable this setting if you need Ed25519 support using Oberon library
+
+#ifndef NRF_CRYPTO_BACKEND_OBERON_ECC_ED25519_ENABLED
+#define NRF_CRYPTO_BACKEND_OBERON_ECC_ED25519_ENABLED 0
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_OBERON_HASH_SHA256_ENABLED  - Oberon SHA-256 hash functionality
+ 
+
+// <i> Oberon backend implementation for SHA-256.
+
+#ifndef NRF_CRYPTO_BACKEND_OBERON_HASH_SHA256_ENABLED
+#define NRF_CRYPTO_BACKEND_OBERON_HASH_SHA256_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_OBERON_HASH_SHA512_ENABLED  - Oberon SHA-512 hash functionality
+ 
+
+// <i> Oberon backend implementation for SHA-512.
+
+#ifndef NRF_CRYPTO_BACKEND_OBERON_HASH_SHA512_ENABLED
+#define NRF_CRYPTO_BACKEND_OBERON_HASH_SHA512_ENABLED 0
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA256_ENABLED  - Oberon HMAC using SHA-256
+ 
+
+// <i> Oberon backend implementation for HMAC using SHA-256.
+
+#ifndef NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA256_ENABLED
+#define NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA256_ENABLED 0
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA512_ENABLED  - Oberon HMAC using SHA-512
+ 
+
+// <i> Oberon backend implementation for HMAC using SHA-512.
+
+#ifndef NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA512_ENABLED
+#define NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA512_ENABLED 0
+#endif
+
+// </e>
+
+// <e> NRF_CRYPTO_BACKEND_OPTIGA_ENABLED - Enable the nrf_crypto Optiga Trust X backend.
+
+// <i> Enables the nrf_crypto backend for Optiga Trust X devices.
+//==========================================================
+#ifndef NRF_CRYPTO_BACKEND_OPTIGA_ENABLED
+#define NRF_CRYPTO_BACKEND_OPTIGA_ENABLED 0
+#endif
+// <q> NRF_CRYPTO_BACKEND_OPTIGA_RNG_ENABLED  - Optiga backend support for RNG
+ 
+
+// <i> The Optiga backend provide external chip RNG.
+
+#ifndef NRF_CRYPTO_BACKEND_OPTIGA_RNG_ENABLED
+#define NRF_CRYPTO_BACKEND_OPTIGA_RNG_ENABLED 0
+#endif
+
+// <q> NRF_CRYPTO_BACKEND_OPTIGA_ECC_SECP256R1_ENABLED  - Optiga backend support for ECC secp256r1
+ 
+
+// <i> The Optiga backend provide external chip ECC using secp256r1.
+
+#ifndef NRF_CRYPTO_BACKEND_OPTIGA_ECC_SECP256R1_ENABLED
+#define NRF_CRYPTO_BACKEND_OPTIGA_ECC_SECP256R1_ENABLED 1
+#endif
+
+// </e>
+
+// <q> NRF_CRYPTO_CURVE25519_BIG_ENDIAN_ENABLED  - Big-endian byte order in raw Curve25519 data
+ 
+
+// <i> Enable big-endian byte order in Curve25519 API, if set to 1. Use little-endian, if set to 0.
+
+#ifndef NRF_CRYPTO_CURVE25519_BIG_ENDIAN_ENABLED
+#define NRF_CRYPTO_CURVE25519_BIG_ENDIAN_ENABLED 0
+#endif
+
+// </e>
+
+// <h> nrf_crypto_rng - RNG Configuration
+
+//==========================================================
+// <q> NRF_CRYPTO_RNG_STATIC_MEMORY_BUFFERS_ENABLED  - Use static memory buffers for context and temporary init buffer.
+ 
+
+// <i> Always recommended when using the nRF HW RNG as the context and temporary buffers are small. Consider disabling if using the CC310 RNG in a RAM constrained application. In this case, memory must be provided to nrf_crypto_rng_init, or it can be allocated internally provided that NRF_CRYPTO_ALLOCATOR does not allocate memory on the stack.
+
+#ifndef NRF_CRYPTO_RNG_STATIC_MEMORY_BUFFERS_ENABLED
+#define NRF_CRYPTO_RNG_STATIC_MEMORY_BUFFERS_ENABLED 1
+#endif
+
+// <q> NRF_CRYPTO_RNG_AUTO_INIT_ENABLED  - Initialize the RNG module automatically when nrf_crypto is initialized.
+ 
+
+// <i> Automatic initialization is only supported with static or internally allocated context and temporary memory.
+
+#ifndef NRF_CRYPTO_RNG_AUTO_INIT_ENABLED
+#define NRF_CRYPTO_RNG_AUTO_INIT_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_DFU 
+
+//==========================================================
+// <h> DFU security - nrf_dfu_validation - DFU validation
+
+//==========================================================
+// <q> NRF_DFU_APP_ACCEPT_SAME_VERSION  - Whether to accept application upgrades with the same version as the current application.
+ 
+
+// <i> This applies to application updates, and possibly to SoftDevice updates.
+// <i> Bootloader upgrades always require higher versions. SoftDevice upgrades
+// <i> look at the sd_req field independently of this config.
+// <i> Disabling this protects against replay attacks wearing out the flash of the device.
+// <i> This config only has an effect when NRF_DFU_APP_DOWNGRADE_PREVENTION is enabled.
+
+#ifndef NRF_DFU_APP_ACCEPT_SAME_VERSION
+#define NRF_DFU_APP_ACCEPT_SAME_VERSION 1
+#endif
+
+// <q> NRF_DFU_APP_DOWNGRADE_PREVENTION  - Check the firmware version and SoftDevice requirements of application (and SoftDevice) updates.
+ 
+
+// <i> Whether to check the incoming version against the version of the existing app and/or
+// <i> the incoming SoftDevice requirements against the existing SoftDevice.
+// <i> This applies to application updates, and possibly to SoftDevice updates.
+// <i> Disabling this causes the checks to always ignore the incoming firmware version and
+// <i> to ignore the SoftDevice requirements if the first requirement is 0.
+// <i> This does not apply the bootloader updates. If the bootloader depends on the SoftDevice
+// <i> e.g. for BLE transport, this does not apply to SoftDevice updates.
+// <i> See @ref lib_bootloader_dfu_validation for more information.
+// <i> When signed updates are required, version checking should always be enabled.
+
+#ifndef NRF_DFU_APP_DOWNGRADE_PREVENTION
+#define NRF_DFU_APP_DOWNGRADE_PREVENTION 1
+#endif
+
+// <q> NRF_DFU_EXTERNAL_APP_VERSIONING  - Require versioning for external applications.
+ 
+
+// <i> This configuration is only used if NRF_DFU_SUPPORTS_EXTERNAL_APP is set to 1.
+// <i> Setting this will require that any FW images using the FW upgrade type 
+// <i> DFU_FW_TYPE_EXTERNAL_APPLICATION must follow a monotonic versioning scheme
+// <i> where the FW version of an upgrade must always be larger than the previously stored 
+// <i> FW version.
+
+#ifndef NRF_DFU_EXTERNAL_APP_VERSIONING
+#define NRF_DFU_EXTERNAL_APP_VERSIONING 1
+#endif
+
+// <q> NRF_DFU_FORCE_DUAL_BANK_APP_UPDATES  - Accept only dual-bank application updates.
+ 
+
+// <i> If not enabled then if there is not enough space to perform dual-bank update
+// <i> application is deleted and single-bank update is performed. In case it is considered
+// <i> security concern user can prefer to discard update request rather than overwrite
+// <i> current application.
+
+#ifndef NRF_DFU_FORCE_DUAL_BANK_APP_UPDATES
+#define NRF_DFU_FORCE_DUAL_BANK_APP_UPDATES 0
+#endif
+
+// <o> NRF_DFU_HW_VERSION - Device hardware version. 
+// <i> This is used to determine if given update is targeting the device.
+// <i> It is checked against the hw_version value in the init packet
+
+#ifndef NRF_DFU_HW_VERSION
+#define NRF_DFU_HW_VERSION 52
+#endif
+
+// <q> NRF_DFU_REQUIRE_SIGNED_APP_UPDATE  - Require a valid signature to update the application or SoftDevice.
+ 
+
+#ifndef NRF_DFU_REQUIRE_SIGNED_APP_UPDATE
+#define NRF_DFU_REQUIRE_SIGNED_APP_UPDATE 1
+#endif
+
+// <q> NRF_DFU_SINGLE_BANK_APP_UPDATES  - Place the application and the SoftDevice directly where they are supposed to be.
+ 
+
+// <i> Note that this creates security concerns when signing and  version checks
+// <i> are enabled. An attacker will be able to delete (but not replace)
+// <i> the current app or SoftDevice without knowing the signature key.
+
+#ifndef NRF_DFU_SINGLE_BANK_APP_UPDATES
+#define NRF_DFU_SINGLE_BANK_APP_UPDATES 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <q> NRF_DFU_SETTINGS_COMPATIBILITY_MODE  - nrf_dfu_settings - DFU Settings
+ 
+
+#ifndef NRF_DFU_SETTINGS_COMPATIBILITY_MODE
+#define NRF_DFU_SETTINGS_COMPATIBILITY_MODE 1
+#endif
+
+// <h> nrf_dfu - Device Firmware Upgrade
+
+//==========================================================
+// <h> DFU transport 
+
+//==========================================================
+// <e> NRF_DFU_TRANSPORT_ANT - ANT transport settings
+//==========================================================
+#ifndef NRF_DFU_TRANSPORT_ANT
+#define NRF_DFU_TRANSPORT_ANT 0
+#endif
+// <o> NRF_DFU_ANT_MTU - MTU size used for firmware bursts. 
+// <i> Sets the maximum burst size used for DFU write commands.
+
+#ifndef NRF_DFU_ANT_MTU
+#define NRF_DFU_ANT_MTU 1024
+#endif
+
+// <h> ANT DFU buffers 
+
+//==========================================================
+// <e> NRF_DFU_ANT_BUFFERS_OVERRIDE 
+
+// <i> Check this option to override the default number of buffers.
+//==========================================================
+#ifndef NRF_DFU_ANT_BUFFERS_OVERRIDE
+#define NRF_DFU_ANT_BUFFERS_OVERRIDE 0
+#endif
+// <o> NRF_DFU_ANT_BUFFERS - Number of buffers in the ANT transport. 
+// <i> Number of buffers to store incoming data while it is being written to flash.
+// <i> Reduce this value to save RAM. If this value is too low, the DFU process will fail.
+
+#ifndef NRF_DFU_ANT_BUFFERS
+#define NRF_DFU_ANT_BUFFERS 8
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> ANT DFU Channel Configuration 
+
+//==========================================================
+// <o> NRF_DFU_ANT_RF_FREQ - DFU RF channel. 
+#ifndef NRF_DFU_ANT_RF_FREQ
+#define NRF_DFU_ANT_RF_FREQ 66
+#endif
+
+// <o> NRF_DFU_ANT_DEV_TYPE - Device type field to use for DFU channel id. 
+#ifndef NRF_DFU_ANT_DEV_TYPE
+#define NRF_DFU_ANT_DEV_TYPE 10
+#endif
+
+// <o> NRF_DFU_ANT_CHANNEL_PERIOD - Channel period of DFU ANT channel. 
+#ifndef NRF_DFU_ANT_CHANNEL_PERIOD
+#define NRF_DFU_ANT_CHANNEL_PERIOD 2048
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <e> NRF_DFU_TRANSPORT_BLE - BLE transport settings
+//==========================================================
+#ifndef NRF_DFU_TRANSPORT_BLE
+#define NRF_DFU_TRANSPORT_BLE 0
+#endif
+// <q> NRF_DFU_BLE_SKIP_SD_INIT  - Skip the SoftDevice and interrupt vector table initialization.
+ 
+
+#ifndef NRF_DFU_BLE_SKIP_SD_INIT
+#define NRF_DFU_BLE_SKIP_SD_INIT 0
+#endif
+
+// <s> NRF_DFU_BLE_ADV_NAME - Default advertising name.
+#ifndef NRF_DFU_BLE_ADV_NAME
+#define NRF_DFU_BLE_ADV_NAME "DfuTarg"
+#endif
+
+// <o> NRF_DFU_BLE_ADV_INTERVAL - Advertising interval (in units of 0.625 ms) 
+#ifndef NRF_DFU_BLE_ADV_INTERVAL
+#define NRF_DFU_BLE_ADV_INTERVAL 40
+#endif
+
+// <h> BLE DFU security 
+
+//==========================================================
+// <q> NRF_DFU_BLE_REQUIRES_BONDS  - Require bond with peer.
+ 
+
+#ifndef NRF_DFU_BLE_REQUIRES_BONDS
+#define NRF_DFU_BLE_REQUIRES_BONDS 0
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> BLE DFU connection 
+
+//==========================================================
+// <o> NRF_DFU_BLE_MIN_CONN_INTERVAL - Minimum connection interval (units). 
+// <i> Minimum GAP connection interval, in 1.25 ms units.
+
+#ifndef NRF_DFU_BLE_MIN_CONN_INTERVAL
+#define NRF_DFU_BLE_MIN_CONN_INTERVAL 12
+#endif
+
+// <o> NRF_DFU_BLE_MAX_CONN_INTERVAL - Maximum connection interval (units). 
+// <i> Maximum GAP connection interval, in 1.25 ms units.
+
+#ifndef NRF_DFU_BLE_MAX_CONN_INTERVAL
+#define NRF_DFU_BLE_MAX_CONN_INTERVAL 12
+#endif
+
+// <o> NRF_DFU_BLE_CONN_SUP_TIMEOUT_MS - Supervision timeout (ms). 
+// <i> GAP connection supervision timeout, in milliseconds.
+
+#ifndef NRF_DFU_BLE_CONN_SUP_TIMEOUT_MS
+#define NRF_DFU_BLE_CONN_SUP_TIMEOUT_MS 6000
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> BLE DFU buffers 
+
+//==========================================================
+// <e> NRF_DFU_BLE_BUFFERS_OVERRIDE 
+
+// <i> Check this option to override the default number of buffers.
+//==========================================================
+#ifndef NRF_DFU_BLE_BUFFERS_OVERRIDE
+#define NRF_DFU_BLE_BUFFERS_OVERRIDE 0
+#endif
+// <o> NRF_DFU_BLE_BUFFERS - Number of buffers in the BLE transport. 
+// <i> Number of buffers to store incoming data while it is being written to flash.
+// <i> Reduce this value to save RAM. If this value is too low, the DFU process will fail.
+
+#ifndef NRF_DFU_BLE_BUFFERS
+#define NRF_DFU_BLE_BUFFERS 8
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> DFU protocol 
+
+//==========================================================
+// <q> NRF_DFU_PROTOCOL_FW_VERSION_MSG  - Firmware version message support.
+ 
+
+// <i> Firmware version message support.
+// <i> If disabled, firmware version requests will return NRF_DFU_RES_CODE_OP_CODE_NOT_SUPPORTED.
+
+#ifndef NRF_DFU_PROTOCOL_FW_VERSION_MSG
+#define NRF_DFU_PROTOCOL_FW_VERSION_MSG 1
+#endif
+
+// <q> NRF_DFU_PROTOCOL_REDUCED  - Reduced protocol opcode selection.
+ 
+
+// <i> Only support a minimal set of opcodes; return NRF_DFU_RES_CODE_OP_CODE_NOT_SUPPORTED 
+// <i> for unsupported opcodes. The supported opcodes are:NRF_DFU_OP_OBJECT_CREATE, 
+// <i> NRF_DFU_OP_OBJECT_EXECUTE, NRF_DFU_OP_OBJECT_SELECT, NRF_DFU_OP_OBJECT_WRITE, 
+// <i> NRF_DFU_OP_CRC_GET, NRF_DFU_OP_RECEIPT_NOTIF_SET, and NRF_DFU_OP_ABORT. 
+// <i> This reduced feature set is used by the BLE transport to reduce flash usage.
+
+#ifndef NRF_DFU_PROTOCOL_REDUCED
+#define NRF_DFU_PROTOCOL_REDUCED 0
+#endif
+
+// <q> NRF_DFU_PROTOCOL_VERSION_MSG  - Protocol version message support.
+ 
+
+// <i> Protocol version message support.
+// <i> If disabled, protocol version requests will return NRF_DFU_RES_CODE_OP_CODE_NOT_SUPPORTED.
+
+#ifndef NRF_DFU_PROTOCOL_VERSION_MSG
+#define NRF_DFU_PROTOCOL_VERSION_MSG 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> Misc DFU settings 
+
+//==========================================================
+// <o> NRF_DFU_APP_DATA_AREA_SIZE - The size (in bytes) of the flash area reserved for application data. 
+// <i> This area is found at the end of the application area, next to the start of
+// <i> the bootloader. This area will not be erased by the bootloader during a
+// <i> firmware upgrade. The size must be a multiple of the flash page size.
+
+#ifndef NRF_DFU_APP_DATA_AREA_SIZE
+#define NRF_DFU_APP_DATA_AREA_SIZE 12288
+#endif
+
+// <q> NRF_DFU_IN_APP  - Specifies that this code is in the app, not the bootloader, so some settings are off-limits.
+ 
+
+// <i> Enable this to disable writing to areas of the settings that are protected
+// <i> by the bootlader. If this is not enabled in the app, certain settings write
+// <i> operations will cause HardFaults or will be ignored. Enabling this option
+// <i> also causes postvalidation to be disabled since this is meant to be done
+// <i> in the bootloader. NRF_BL_DFU_ALLOW_UPDATE_FROM_APP must be enabled in the bootloader.
+
+#ifndef NRF_DFU_IN_APP
+#define NRF_DFU_IN_APP 0
+#endif
+
+// <q> NRF_DFU_SAVE_PROGRESS_IN_FLASH  - Save DFU progress in flash.
+ 
+
+// <i> Save DFU progress to flash so that it can be resumed if interrupted, instead of being restarted.
+// <i> Keep this setting disabled to maximize transfer speed and minimize flash wear.
+// <i> The init packet is always saved in flash, regardless of this setting.
+
+#ifndef NRF_DFU_SAVE_PROGRESS_IN_FLASH
+#define NRF_DFU_SAVE_PROGRESS_IN_FLASH 0
+#endif
+
+// <q> NRF_DFU_SUPPORTS_EXTERNAL_APP  - [Experimental] Support for external app.
+ 
+
+// <i> External apps are apps that will not be activated. They can 
+// <i> e.g. be apps to be sent to a third party. External app updates 
+// <i> are verified upon reception, but will remain in bank 1, and 
+// <i> will never be booted. An external app will be overwritten if 
+// <i> a new DFU procedure is performed. Note: This functionality is 
+// <i> experimental and not yet used in any examples.
+
+#ifndef NRF_DFU_SUPPORTS_EXTERNAL_APP
+#define NRF_DFU_SUPPORTS_EXTERNAL_APP 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nrf_dfu_serial_uart - UART DFU transport
+
+//==========================================================
+// <q> NRF_DFU_SERIAL_UART_USES_HWFC  - HWFC configuration
+ 
+
+#ifndef NRF_DFU_SERIAL_UART_USES_HWFC
+#define NRF_DFU_SERIAL_UART_USES_HWFC 0
+#endif
+
+// <o> NRF_DFU_SERIAL_UART_RX_BUFFERS - Number of RX buffers. 
+// <i> Number of buffers depends on flash access vs.
+// <i> transport throughtput. If value is too low it may lead
+// <i> to received packets being dropped.
+
+#ifndef NRF_DFU_SERIAL_UART_RX_BUFFERS
+#define NRF_DFU_SERIAL_UART_RX_BUFFERS 3
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Drivers 
+
+//==========================================================
+// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
+//==========================================================
+#ifndef NRFX_PRS_ENABLED
+#define NRFX_PRS_ENABLED 1
+#endif
+// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_0_ENABLED
+#define NRFX_PRS_BOX_0_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_1_ENABLED
+#define NRFX_PRS_BOX_1_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_2_ENABLED
+#define NRFX_PRS_BOX_2_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_3_ENABLED
+#define NRFX_PRS_BOX_3_ENABLED 0
+#endif
+
+// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
+ 
+
+#ifndef NRFX_PRS_BOX_4_ENABLED
+#define NRFX_PRS_BOX_4_ENABLED 1
+#endif
+
+// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
+#define NRFX_PRS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
+#define NRFX_PRS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_INFO_COLOR
+#define NRFX_PRS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
+#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
+//==========================================================
+#ifndef NRFX_UARTE_ENABLED
+#define NRFX_UARTE_ENABLED 1
+#endif
+// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance 
+#ifndef NRFX_UARTE0_ENABLED
+#define NRFX_UARTE0_ENABLED 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
+#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
+#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10289152=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
+//#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 9600
+
+#endif
+
+// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 6
+#endif
+
+// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
+#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning  
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
+#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
+#define NRFX_UARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
+#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
+//==========================================================
+#ifndef NRFX_UART_ENABLED
+#define NRFX_UART_ENABLED 1
+#endif
+// <o> NRFX_UART0_ENABLED - Enable UART0 instance 
+#ifndef NRFX_UART0_ENABLED
+#define NRFX_UART0_ENABLED 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
+#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
+#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3866624=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7729152=> 28800 baud 
+// <8388608=> 31250 baud 
+// <10309632=> 38400 baud 
+// <15007744=> 56000 baud 
+// <15462400=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30924800=> 115200 baud 
+// <61845504=> 230400 baud 
+// <67108864=> 250000 baud 
+// <123695104=> 460800 baud 
+// <247386112=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
+#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
+#endif
+
+// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 6
+#endif
+
+// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRFX_UART_CONFIG_LOG_ENABLED
+#define NRFX_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_UART_CONFIG_LOG_LEVEL
+#define NRFX_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_INFO_COLOR
+#define NRFX_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
+#define NRFX_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
+//==========================================================
+#ifndef UART_ENABLED
+#define UART_ENABLED 1
+#endif
+// <o> UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
+ 
+// <0=> Disabled 
+// <1=> Enabled 
+
+#ifndef UART_DEFAULT_CONFIG_HWFC
+#define UART_DEFAULT_CONFIG_HWFC 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_PARITY  - Parity
+ 
+// <0=> Excluded 
+// <14=> Included 
+
+#ifndef UART_DEFAULT_CONFIG_PARITY
+#define UART_DEFAULT_CONFIG_PARITY 0
+#endif
+
+// <o> UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef UART_DEFAULT_CONFIG_BAUDRATE
+#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
+#endif
+
+// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
+ 
+
+// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
+// <0=> 0 (highest) 
+// <1=> 1 
+// <2=> 2 
+// <3=> 3 
+// <4=> 4 
+// <5=> 5 
+// <6=> 6 
+// <7=> 7 
+
+#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
+#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 6
+#endif
+
+// <q> UART_EASY_DMA_SUPPORT  - Driver supporting EasyDMA
+ 
+
+#ifndef UART_EASY_DMA_SUPPORT
+#define UART_EASY_DMA_SUPPORT 1
+#endif
+
+// <q> UART_LEGACY_SUPPORT  - Driver supporting Legacy mode
+ 
+
+#ifndef UART_LEGACY_SUPPORT
+#define UART_LEGACY_SUPPORT 0
+#endif
+
+// <e> UART0_ENABLED - Enable UART0 instance
+//==========================================================
+#ifndef UART0_ENABLED
+#define UART0_ENABLED 1
+#endif
+// <q> UART0_CONFIG_USE_EASY_DMA  - Default setting for using EasyDMA
+ 
+
+#ifndef UART0_CONFIG_USE_EASY_DMA
+#define UART0_CONFIG_USE_EASY_DMA 1
+#endif
+
+// </e>
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Libraries 
+
+//==========================================================
+// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
+//==========================================================
+#ifndef APP_SCHEDULER_ENABLED
+#define APP_SCHEDULER_ENABLED 1
+#endif
+// <q> APP_SCHEDULER_WITH_PAUSE  - Enabling pause feature
+ 
+
+#ifndef APP_SCHEDULER_WITH_PAUSE
+#define APP_SCHEDULER_WITH_PAUSE 0
+#endif
+
+// <q> APP_SCHEDULER_WITH_PROFILER  - Enabling scheduler profiling
+ 
+
+#ifndef APP_SCHEDULER_WITH_PROFILER
+#define APP_SCHEDULER_WITH_PROFILER 0
+#endif
+
+// </e>
+
+// <q> CRC32_ENABLED  - crc32 - CRC32 calculation routines
+ 
+
+#ifndef CRC32_ENABLED
+#define CRC32_ENABLED 1
+#endif
+
+// <e> MEM_MANAGER_ENABLED - mem_manager - Dynamic memory allocator
+//==========================================================
+#ifndef MEM_MANAGER_ENABLED
+#define MEM_MANAGER_ENABLED 1
+#endif
+// <o> MEMORY_MANAGER_SMALL_BLOCK_COUNT - Size of each memory blocks identified as 'small' block.  <0-255> 
+
+
+#ifndef MEMORY_MANAGER_SMALL_BLOCK_COUNT
+#define MEMORY_MANAGER_SMALL_BLOCK_COUNT 1
+#endif
+
+// <o> MEMORY_MANAGER_SMALL_BLOCK_SIZE -  Size of each memory blocks identified as 'small' block. 
+// <i>  Size of each memory blocks identified as 'small' block. Memory block are recommended to be word-sized.
+
+#ifndef MEMORY_MANAGER_SMALL_BLOCK_SIZE
+#define MEMORY_MANAGER_SMALL_BLOCK_SIZE 32
+#endif
+
+// <o> MEMORY_MANAGER_MEDIUM_BLOCK_COUNT - Size of each memory blocks identified as 'medium' block.  <0-255> 
+
+
+#ifndef MEMORY_MANAGER_MEDIUM_BLOCK_COUNT
+#define MEMORY_MANAGER_MEDIUM_BLOCK_COUNT 0
+#endif
+
+// <o> MEMORY_MANAGER_MEDIUM_BLOCK_SIZE -  Size of each memory blocks identified as 'medium' block. 
+// <i>  Size of each memory blocks identified as 'medium' block. Memory block are recommended to be word-sized.
+
+#ifndef MEMORY_MANAGER_MEDIUM_BLOCK_SIZE
+#define MEMORY_MANAGER_MEDIUM_BLOCK_SIZE 256
+#endif
+
+// <o> MEMORY_MANAGER_LARGE_BLOCK_COUNT - Size of each memory blocks identified as 'large' block.  <0-255> 
+
+
+#ifndef MEMORY_MANAGER_LARGE_BLOCK_COUNT
+#define MEMORY_MANAGER_LARGE_BLOCK_COUNT 0
+#endif
+
+// <o> MEMORY_MANAGER_LARGE_BLOCK_SIZE -  Size of each memory blocks identified as 'large' block. 
+// <i>  Size of each memory blocks identified as 'large' block. Memory block are recommended to be word-sized.
+
+#ifndef MEMORY_MANAGER_LARGE_BLOCK_SIZE
+#define MEMORY_MANAGER_LARGE_BLOCK_SIZE 256
+#endif
+
+// <o> MEMORY_MANAGER_XLARGE_BLOCK_COUNT - Size of each memory blocks identified as 'extra large' block.  <0-255> 
+
+
+#ifndef MEMORY_MANAGER_XLARGE_BLOCK_COUNT
+#define MEMORY_MANAGER_XLARGE_BLOCK_COUNT 0
+#endif
+
+// <o> MEMORY_MANAGER_XLARGE_BLOCK_SIZE -  Size of each memory blocks identified as 'extra large' block. 
+// <i>  Size of each memory blocks identified as 'extra large' block. Memory block are recommended to be word-sized.
+
+#ifndef MEMORY_MANAGER_XLARGE_BLOCK_SIZE
+#define MEMORY_MANAGER_XLARGE_BLOCK_SIZE 1320
+#endif
+
+// <o> MEMORY_MANAGER_XXLARGE_BLOCK_COUNT - Size of each memory blocks identified as 'extra extra large' block.  <0-255> 
+
+
+#ifndef MEMORY_MANAGER_XXLARGE_BLOCK_COUNT
+#define MEMORY_MANAGER_XXLARGE_BLOCK_COUNT 0
+#endif
+
+// <o> MEMORY_MANAGER_XXLARGE_BLOCK_SIZE -  Size of each memory blocks identified as 'extra extra large' block. 
+// <i>  Size of each memory blocks identified as 'extra extra large' block. Memory block are recommended to be word-sized.
+
+#ifndef MEMORY_MANAGER_XXLARGE_BLOCK_SIZE
+#define MEMORY_MANAGER_XXLARGE_BLOCK_SIZE 3444
+#endif
+
+// <o> MEMORY_MANAGER_XSMALL_BLOCK_COUNT - Size of each memory blocks identified as 'extra small' block.  <0-255> 
+
+
+#ifndef MEMORY_MANAGER_XSMALL_BLOCK_COUNT
+#define MEMORY_MANAGER_XSMALL_BLOCK_COUNT 0
+#endif
+
+// <o> MEMORY_MANAGER_XSMALL_BLOCK_SIZE -  Size of each memory blocks identified as 'extra small' block. 
+// <i>  Size of each memory blocks identified as 'extra large' block. Memory block are recommended to be word-sized.
+
+#ifndef MEMORY_MANAGER_XSMALL_BLOCK_SIZE
+#define MEMORY_MANAGER_XSMALL_BLOCK_SIZE 64
+#endif
+
+// <o> MEMORY_MANAGER_XXSMALL_BLOCK_COUNT - Size of each memory blocks identified as 'extra extra small' block.  <0-255> 
+
+
+#ifndef MEMORY_MANAGER_XXSMALL_BLOCK_COUNT
+#define MEMORY_MANAGER_XXSMALL_BLOCK_COUNT 0
+#endif
+
+// <o> MEMORY_MANAGER_XXSMALL_BLOCK_SIZE -  Size of each memory blocks identified as 'extra extra small' block. 
+// <i>  Size of each memory blocks identified as 'extra extra small' block. Memory block are recommended to be word-sized.
+
+#ifndef MEMORY_MANAGER_XXSMALL_BLOCK_SIZE
+#define MEMORY_MANAGER_XXSMALL_BLOCK_SIZE 32
+#endif
+
+// <e> MEM_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef MEM_MANAGER_CONFIG_LOG_ENABLED
+#define MEM_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> MEM_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef MEM_MANAGER_CONFIG_LOG_LEVEL
+#define MEM_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> MEM_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef MEM_MANAGER_CONFIG_INFO_COLOR
+#define MEM_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> MEM_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef MEM_MANAGER_CONFIG_DEBUG_COLOR
+#define MEM_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <q> MEM_MANAGER_DISABLE_API_PARAM_CHECK  - Disable API parameter checks in the module.
+ 
+
+#ifndef MEM_MANAGER_DISABLE_API_PARAM_CHECK
+#define MEM_MANAGER_DISABLE_API_PARAM_CHECK 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
+//==========================================================
+#ifndef NRF_BALLOC_ENABLED
+#define NRF_BALLOC_ENABLED 1
+#endif
+// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
+#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
+#endif
+
+// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard.  <0-255> 
+
+
+#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
+#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
+#endif
+
+// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED  - Enables basic checks in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
+#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED  - Enables double memory free check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED  - Enables free memory corruption check in this module.
+ 
+
+#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
+#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
+#endif
+
+// <q> NRF_BALLOC_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_BALLOC_CLI_CMDS
+#define NRF_BALLOC_CLI_CMDS 0
+#endif
+
+// </e>
+
+// </e>
+
+// <e> NRF_FSTORAGE_ENABLED - nrf_fstorage - Flash abstraction library
+//==========================================================
+#ifndef NRF_FSTORAGE_ENABLED
+#define NRF_FSTORAGE_ENABLED 1
+#endif
+// <h> nrf_fstorage - Common settings
+
+// <i> Common settings to all fstorage implementations
+//==========================================================
+// <q> NRF_FSTORAGE_PARAM_CHECK_DISABLED  - Disable user input validation
+ 
+
+// <i> If selected, use ASSERT to validate user input.
+// <i> This effectively removes user input validation in production code.
+// <i> Recommended setting: OFF, only enable this setting if size is a major concern.
+
+#ifndef NRF_FSTORAGE_PARAM_CHECK_DISABLED
+#define NRF_FSTORAGE_PARAM_CHECK_DISABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nrf_fstorage_sd - Implementation using the SoftDevice
+
+// <i> Configuration options for the fstorage implementation using the SoftDevice
+//==========================================================
+// <o> NRF_FSTORAGE_SD_QUEUE_SIZE - Size of the internal queue of operations 
+// <i> Increase this value if API calls frequently return the error @ref NRF_ERROR_NO_MEM.
+
+#ifndef NRF_FSTORAGE_SD_QUEUE_SIZE
+#define NRF_FSTORAGE_SD_QUEUE_SIZE 16
+#endif
+
+// <o> NRF_FSTORAGE_SD_MAX_RETRIES - Maximum number of attempts at executing an operation when the SoftDevice is busy 
+// <i> Increase this value if events frequently return the @ref NRF_ERROR_TIMEOUT error.
+// <i> The SoftDevice might fail to schedule flash access due to high BLE activity.
+
+#ifndef NRF_FSTORAGE_SD_MAX_RETRIES
+#define NRF_FSTORAGE_SD_MAX_RETRIES 8
+#endif
+
+// <o> NRF_FSTORAGE_SD_MAX_WRITE_SIZE - Maximum number of bytes to be written to flash in a single operation 
+// <i> This value must be a multiple of four.
+// <i> Lowering this value can increase the chances of the SoftDevice being able to execute flash operations in between radio activity.
+// <i> This value is bound by the maximum number of bytes that can be written to flash in a single call to @ref sd_flash_write.
+// <i> That is 1024 bytes for nRF51 ICs and 4096 bytes for nRF52 ICs.
+
+#ifndef NRF_FSTORAGE_SD_MAX_WRITE_SIZE
+#define NRF_FSTORAGE_SD_MAX_WRITE_SIZE 20
+#endif
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <q> NRF_MEMOBJ_ENABLED  - nrf_memobj - Linked memory allocator module
+ 
+
+#ifndef NRF_MEMOBJ_ENABLED
+#define NRF_MEMOBJ_ENABLED 1
+#endif
+
+// <e> NRF_QUEUE_ENABLED - nrf_queue - Queue module
+//==========================================================
+#ifndef NRF_QUEUE_ENABLED
+#define NRF_QUEUE_ENABLED 0
+#endif
+// <q> NRF_QUEUE_CLI_CMDS  - Enable CLI commands specific to the module
+ 
+
+#ifndef NRF_QUEUE_CLI_CMDS
+#define NRF_QUEUE_CLI_CMDS 0
+#endif
+
+// </e>
+
+// <q> NRF_STRERROR_ENABLED  - nrf_strerror - Library for converting error code to string.
+ 
+
+#ifndef NRF_STRERROR_ENABLED
+#define NRF_STRERROR_ENABLED 1
+#endif
+
+// <q> SLIP_ENABLED  - slip - SLIP encoding and decoding
+ 
+
+#ifndef SLIP_ENABLED
+#define SLIP_ENABLED 1
+#endif
+
+// <h> nrf_fprintf - fprintf function.
+
+//==========================================================
+// <q> NRF_FPRINTF_ENABLED  - Enable/disable fprintf module.
+ 
+
+#ifndef NRF_FPRINTF_ENABLED
+#define NRF_FPRINTF_ENABLED 1
+#endif
+
+// <q> NRF_FPRINTF_FLAG_AUTOMATIC_CR_ON_LF_ENABLED  - For each printed LF, function will add CR.
+ 
+
+#ifndef NRF_FPRINTF_FLAG_AUTOMATIC_CR_ON_LF_ENABLED
+#define NRF_FPRINTF_FLAG_AUTOMATIC_CR_ON_LF_ENABLED 1
+#endif
+
+// <q> NRF_FPRINTF_DOUBLE_ENABLED  - Enable IEEE-754 double precision formatting.
+ 
+
+#ifndef NRF_FPRINTF_DOUBLE_ENABLED
+#define NRF_FPRINTF_DOUBLE_ENABLED 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Log 
+
+//==========================================================
+// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_RTT_ENABLED
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
+#endif
+// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT 
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1
+#endif
+
+// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. 
+// <i> If RTT fails to accept any new data after retries
+// <i> module assumes that host is not active and on next
+// <i> request it will perform only one write attempt.
+// <i> On successful writing, module assumes that host is active
+// <i> and scheme with retry is applied again.
+
+#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
+#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3
+#endif
+
+// </e>
+
+// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
+//==========================================================
+#ifndef NRF_LOG_BACKEND_UART_ENABLED
+#define NRF_LOG_BACKEND_UART_ENABLED 0
+#endif
+// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
+#ifndef NRF_LOG_BACKEND_UART_TX_PIN
+#define NRF_LOG_BACKEND_UART_TX_PIN 6
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
+ 
+// <323584=> 1200 baud 
+// <643072=> 2400 baud 
+// <1290240=> 4800 baud 
+// <2576384=> 9600 baud 
+// <3862528=> 14400 baud 
+// <5152768=> 19200 baud 
+// <7716864=> 28800 baud 
+// <10289152=> 38400 baud 
+// <15400960=> 57600 baud 
+// <20615168=> 76800 baud 
+// <30801920=> 115200 baud 
+// <61865984=> 230400 baud 
+// <67108864=> 250000 baud 
+// <121634816=> 460800 baud 
+// <251658240=> 921600 baud 
+// <268435456=> 1000000 baud 
+
+#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
+#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
+#endif
+
+// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. 
+// <i> Size of the buffer is a trade-off between RAM usage and processing.
+// <i> if buffer is smaller then strings will often be fragmented.
+// <i> It is recommended to use size which will fit typical log and only the
+// <i> longer one will be fragmented.
+
+#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
+#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
+#endif
+
+// </e>
+
+// <e> NRF_LOG_ENABLED - nrf_log - Logger
+//==========================================================
+#ifndef NRF_LOG_ENABLED
+#define NRF_LOG_ENABLED 1
+#endif
+// <h> Log message pool - Configuration of log message pool
+
+//==========================================================
+// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. 
+// <i> If a small value is set, then performance of logs processing
+// <i> is degraded because data is fragmented. Bigger value impacts
+// <i> RAM memory utilization. The size is set to fit a message with
+// <i> a timestamp and up to 2 arguments in a single memory object.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
+#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
+#endif
+
+// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects 
+// <i> If a small value is set, then it may lead to a deadlock
+// <i> in certain cases if backend has high latency and holds
+// <i> multiple messages for long time. Bigger value impacts
+// <i> RAM memory usage.
+
+#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
+#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
+#endif
+
+// </h> 
+//==========================================================
+
+// <q> NRF_LOG_ALLOW_OVERFLOW  - Configures behavior when circular buffer is full.
+ 
+
+// <i> If set then oldest logs are overwritten. Otherwise a 
+// <i> marker is injected informing about overflow.
+
+#ifndef NRF_LOG_ALLOW_OVERFLOW
+#define NRF_LOG_ALLOW_OVERFLOW 1
+#endif
+
+// <o> NRF_LOG_BUFSIZE  - Size of the buffer for storing logs (in bytes).
+ 
+
+// <i> Must be power of 2 and multiple of 4.
+// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+// <2048=> 2048 
+// <4096=> 4096 
+// <8192=> 8192 
+// <16384=> 16384 
+
+#ifndef NRF_LOG_BUFSIZE
+#define NRF_LOG_BUFSIZE 4096
+#endif
+
+// <q> NRF_LOG_CLI_CMDS  - Enable CLI commands for the module.
+ 
+
+#ifndef NRF_LOG_CLI_CMDS
+#define NRF_LOG_CLI_CMDS 0
+#endif
+
+// <o> NRF_LOG_DEFAULT_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LOG_DEFAULT_LEVEL
+#define NRF_LOG_DEFAULT_LEVEL 4
+#endif
+
+// <q> NRF_LOG_DEFERRED  - Enable deffered logger.
+ 
+
+// <i> Log data is buffered and can be processed in idle.
+
+#ifndef NRF_LOG_DEFERRED
+#define NRF_LOG_DEFERRED 1
+#endif
+
+// <q> NRF_LOG_FILTERS_ENABLED  - Enable dynamic filtering of logs.
+ 
+
+#ifndef NRF_LOG_FILTERS_ENABLED
+#define NRF_LOG_FILTERS_ENABLED 0
+#endif
+
+// <q> NRF_LOG_NON_DEFFERED_CRITICAL_REGION_ENABLED  - Enable use of critical region for non deffered mode when flushing logs.
+ 
+
+// <i> When enabled NRF_LOG_FLUSH is called from critical section when non deffered mode is used.
+// <i> Log output will never be corrupted as access to the log backend is exclusive
+// <i> but system will spend significant amount of time in critical section
+
+#ifndef NRF_LOG_NON_DEFFERED_CRITICAL_REGION_ENABLED
+#define NRF_LOG_NON_DEFFERED_CRITICAL_REGION_ENABLED 0
+#endif
+
+// <o> NRF_LOG_STR_PUSH_BUFFER_SIZE  - Size of the buffer dedicated for strings stored using @ref NRF_LOG_PUSH.
+ 
+// <16=> 16 
+// <32=> 32 
+// <64=> 64 
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+
+#ifndef NRF_LOG_STR_PUSH_BUFFER_SIZE
+#define NRF_LOG_STR_PUSH_BUFFER_SIZE 128
+#endif
+
+// <o> NRF_LOG_STR_PUSH_BUFFER_SIZE  - Size of the buffer dedicated for strings stored using @ref NRF_LOG_PUSH.
+ 
+// <16=> 16 
+// <32=> 32 
+// <64=> 64 
+// <128=> 128 
+// <256=> 256 
+// <512=> 512 
+// <1024=> 1024 
+
+#ifndef NRF_LOG_STR_PUSH_BUFFER_SIZE
+#define NRF_LOG_STR_PUSH_BUFFER_SIZE 128
+#endif
+
+// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
+//==========================================================
+#ifndef NRF_LOG_USES_COLORS
+#define NRF_LOG_USES_COLORS 0
+#endif
+// <o> NRF_LOG_COLOR_DEFAULT  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_COLOR_DEFAULT
+#define NRF_LOG_COLOR_DEFAULT 0
+#endif
+
+// <o> NRF_LOG_ERROR_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_ERROR_COLOR
+#define NRF_LOG_ERROR_COLOR 2
+#endif
+
+// <o> NRF_LOG_WARNING_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LOG_WARNING_COLOR
+#define NRF_LOG_WARNING_COLOR 4
+#endif
+
+// </e>
+
+// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
+
+// <i> Function for getting the timestamp is provided by the user
+//==========================================================
+#ifndef NRF_LOG_USES_TIMESTAMP
+#define NRF_LOG_USES_TIMESTAMP 0
+#endif
+// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) or 0 to use app_timer frequency. 
+#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
+#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 0
+#endif
+
+// </e>
+
+// <h> nrf_log module configuration 
+
+//==========================================================
+// <h> nrf_log in nRF_Core 
+
+//==========================================================
+// <e> NRF_MPU_LIB_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MPU_LIB_CONFIG_LOG_ENABLED
+#define NRF_MPU_LIB_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MPU_LIB_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MPU_LIB_CONFIG_LOG_LEVEL
+#define NRF_MPU_LIB_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MPU_LIB_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_LIB_CONFIG_INFO_COLOR
+#define NRF_MPU_LIB_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MPU_LIB_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MPU_LIB_CONFIG_DEBUG_COLOR
+#define NRF_MPU_LIB_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
+#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
+#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
+#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
+#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
+#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TASK_MANAGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
+#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TASK_MANAGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
+#define TASK_MANAGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
+#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Drivers 
+
+//==========================================================
+// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef CLOCK_CONFIG_LOG_ENABLED
+#define CLOCK_CONFIG_LOG_ENABLED 0
+#endif
+// <o> CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef CLOCK_CONFIG_LOG_LEVEL
+#define CLOCK_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_INFO_COLOR
+#define CLOCK_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef CLOCK_CONFIG_DEBUG_COLOR
+#define CLOCK_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef COMP_CONFIG_LOG_ENABLED
+#define COMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> COMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef COMP_CONFIG_LOG_LEVEL
+#define COMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_INFO_COLOR
+#define COMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef COMP_CONFIG_DEBUG_COLOR
+#define COMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef GPIOTE_CONFIG_LOG_ENABLED
+#define GPIOTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef GPIOTE_CONFIG_LOG_LEVEL
+#define GPIOTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_INFO_COLOR
+#define GPIOTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef GPIOTE_CONFIG_DEBUG_COLOR
+#define GPIOTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef LPCOMP_CONFIG_LOG_ENABLED
+#define LPCOMP_CONFIG_LOG_ENABLED 0
+#endif
+// <o> LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef LPCOMP_CONFIG_LOG_LEVEL
+#define LPCOMP_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_INFO_COLOR
+#define LPCOMP_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef LPCOMP_CONFIG_DEBUG_COLOR
+#define LPCOMP_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> MAX3421E_HOST_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef MAX3421E_HOST_CONFIG_LOG_ENABLED
+#define MAX3421E_HOST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> MAX3421E_HOST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef MAX3421E_HOST_CONFIG_LOG_LEVEL
+#define MAX3421E_HOST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> MAX3421E_HOST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef MAX3421E_HOST_CONFIG_INFO_COLOR
+#define MAX3421E_HOST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> MAX3421E_HOST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef MAX3421E_HOST_CONFIG_DEBUG_COLOR
+#define MAX3421E_HOST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRFX_USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef NRFX_USBD_CONFIG_LOG_ENABLED
+#define NRFX_USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRFX_USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRFX_USBD_CONFIG_LOG_LEVEL
+#define NRFX_USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRFX_USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_USBD_CONFIG_INFO_COLOR
+#define NRFX_USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRFX_USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRFX_USBD_CONFIG_DEBUG_COLOR
+#define NRFX_USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PDM_CONFIG_LOG_ENABLED
+#define PDM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PDM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PDM_CONFIG_LOG_LEVEL
+#define PDM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_INFO_COLOR
+#define PDM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PDM_CONFIG_DEBUG_COLOR
+#define PDM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PPI_CONFIG_LOG_ENABLED
+#define PPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PPI_CONFIG_LOG_LEVEL
+#define PPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_INFO_COLOR
+#define PPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PPI_CONFIG_DEBUG_COLOR
+#define PPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef PWM_CONFIG_LOG_ENABLED
+#define PWM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> PWM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PWM_CONFIG_LOG_LEVEL
+#define PWM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_INFO_COLOR
+#define PWM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PWM_CONFIG_DEBUG_COLOR
+#define PWM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef QDEC_CONFIG_LOG_ENABLED
+#define QDEC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> QDEC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef QDEC_CONFIG_LOG_LEVEL
+#define QDEC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_INFO_COLOR
+#define QDEC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef QDEC_CONFIG_DEBUG_COLOR
+#define QDEC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RNG_CONFIG_LOG_ENABLED
+#define RNG_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RNG_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RNG_CONFIG_LOG_LEVEL
+#define RNG_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_INFO_COLOR
+#define RNG_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RNG_CONFIG_DEBUG_COLOR
+#define RNG_CONFIG_DEBUG_COLOR 0
+#endif
+
+// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED  - Enables logging of random numbers.
+ 
+
+#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
+#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
+#endif
+
+// </e>
+
+// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef RTC_CONFIG_LOG_ENABLED
+#define RTC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> RTC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef RTC_CONFIG_LOG_LEVEL
+#define RTC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_INFO_COLOR
+#define RTC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef RTC_CONFIG_DEBUG_COLOR
+#define RTC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SAADC_CONFIG_LOG_ENABLED
+#define SAADC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SAADC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SAADC_CONFIG_LOG_LEVEL
+#define SAADC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_INFO_COLOR
+#define SAADC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SAADC_CONFIG_DEBUG_COLOR
+#define SAADC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPIS_CONFIG_LOG_ENABLED
+#define SPIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPIS_CONFIG_LOG_LEVEL
+#define SPIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_INFO_COLOR
+#define SPIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPIS_CONFIG_DEBUG_COLOR
+#define SPIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SPI_CONFIG_LOG_ENABLED
+#define SPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SPI_CONFIG_LOG_LEVEL
+#define SPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_INFO_COLOR
+#define SPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SPI_CONFIG_DEBUG_COLOR
+#define SPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TIMER_CONFIG_LOG_ENABLED
+#define TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TIMER_CONFIG_LOG_LEVEL
+#define TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_INFO_COLOR
+#define TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TIMER_CONFIG_DEBUG_COLOR
+#define TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWIS_CONFIG_LOG_ENABLED
+#define TWIS_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWIS_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWIS_CONFIG_LOG_LEVEL
+#define TWIS_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_INFO_COLOR
+#define TWIS_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWIS_CONFIG_DEBUG_COLOR
+#define TWIS_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef TWI_CONFIG_LOG_ENABLED
+#define TWI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> TWI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef TWI_CONFIG_LOG_LEVEL
+#define TWI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_INFO_COLOR
+#define TWI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef TWI_CONFIG_DEBUG_COLOR
+#define TWI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef UART_CONFIG_LOG_ENABLED
+#define UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef UART_CONFIG_LOG_LEVEL
+#define UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_INFO_COLOR
+#define UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef UART_CONFIG_DEBUG_COLOR
+#define UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
+//==========================================================
+#ifndef USBD_CONFIG_LOG_ENABLED
+#define USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef USBD_CONFIG_LOG_LEVEL
+#define USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_INFO_COLOR
+#define USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef USBD_CONFIG_DEBUG_COLOR
+#define USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef WDT_CONFIG_LOG_ENABLED
+#define WDT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> WDT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef WDT_CONFIG_LOG_LEVEL
+#define WDT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_INFO_COLOR
+#define WDT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef WDT_CONFIG_DEBUG_COLOR
+#define WDT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Libraries 
+
+//==========================================================
+// <e> APP_BUTTON_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_BUTTON_CONFIG_LOG_ENABLED
+#define APP_BUTTON_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_BUTTON_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_BUTTON_CONFIG_LOG_LEVEL
+#define APP_BUTTON_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_BUTTON_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_BUTTON_CONFIG_INITIAL_LOG_LEVEL
+#define APP_BUTTON_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_BUTTON_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_BUTTON_CONFIG_INFO_COLOR
+#define APP_BUTTON_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_BUTTON_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_BUTTON_CONFIG_DEBUG_COLOR
+#define APP_BUTTON_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_TIMER_CONFIG_LOG_ENABLED
+#define APP_TIMER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_LOG_LEVEL
+#define APP_TIMER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
+#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> APP_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_INFO_COLOR
+#define APP_TIMER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
+#define APP_TIMER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
+#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
+#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
+#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_CONFIG_LOG_ENABLED - Enable logging in the module.
+//==========================================================
+#ifndef APP_USBD_CONFIG_LOG_ENABLED
+#define APP_USBD_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_CONFIG_LOG_LEVEL
+#define APP_USBD_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CONFIG_INFO_COLOR
+#define APP_USBD_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_CONFIG_DEBUG_COLOR
+#define APP_USBD_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
+#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
+#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
+#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
+#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
+#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
+#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
+#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
+#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
+#endif
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
+#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
+#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
+#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
+#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
+#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BALLOC_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL  - Initial severity level if dynamic filtering is enabled.
+ 
+
+// <i> If module generates a lot of logs, initial log level can
+// <i> be decreased to prevent flooding. Severity level can be
+// <i> increased on instance basis.
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
+#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BALLOC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
+#define NRF_BALLOC_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
+#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_ENABLED
+#define NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_LEVEL
+#define NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_BLOCK_DEV_EMPTY_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BLOCK_DEV_EMPTY_CONFIG_INFO_COLOR
+#define NRF_BLOCK_DEV_EMPTY_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BLOCK_DEV_EMPTY_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BLOCK_DEV_EMPTY_CONFIG_DEBUG_COLOR
+#define NRF_BLOCK_DEV_EMPTY_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BLOCK_DEV_QSPI_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BLOCK_DEV_QSPI_CONFIG_LOG_ENABLED
+#define NRF_BLOCK_DEV_QSPI_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BLOCK_DEV_QSPI_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BLOCK_DEV_QSPI_CONFIG_LOG_LEVEL
+#define NRF_BLOCK_DEV_QSPI_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BLOCK_DEV_QSPI_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BLOCK_DEV_QSPI_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_BLOCK_DEV_QSPI_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_BLOCK_DEV_QSPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BLOCK_DEV_QSPI_CONFIG_INFO_COLOR
+#define NRF_BLOCK_DEV_QSPI_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BLOCK_DEV_QSPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BLOCK_DEV_QSPI_CONFIG_DEBUG_COLOR
+#define NRF_BLOCK_DEV_QSPI_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_BLOCK_DEV_RAM_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_BLOCK_DEV_RAM_CONFIG_LOG_ENABLED
+#define NRF_BLOCK_DEV_RAM_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_BLOCK_DEV_RAM_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BLOCK_DEV_RAM_CONFIG_LOG_LEVEL
+#define NRF_BLOCK_DEV_RAM_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_BLOCK_DEV_RAM_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_BLOCK_DEV_RAM_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_BLOCK_DEV_RAM_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_BLOCK_DEV_RAM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BLOCK_DEV_RAM_CONFIG_INFO_COLOR
+#define NRF_BLOCK_DEV_RAM_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_BLOCK_DEV_RAM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_BLOCK_DEV_RAM_CONFIG_DEBUG_COLOR
+#define NRF_BLOCK_DEV_RAM_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
+#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
+#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
+#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
+#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
+#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
+#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
+#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
+#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
+#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
+#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
+#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
+#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
+#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
+#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
+#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
+#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
+#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_QUEUE_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL  - Initial severity level if dynamic filtering is enabled
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
+#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
+#endif
+
+// <o> NRF_QUEUE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
+#define NRF_QUEUE_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
+#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
+//==========================================================
+#ifndef NRF_SDH_ANT_LOG_ENABLED
+#define NRF_SDH_ANT_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_ANT_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_ANT_LOG_LEVEL
+#define NRF_SDH_ANT_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_ANT_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_INFO_COLOR
+#define NRF_SDH_ANT_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_ANT_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_ANT_DEBUG_COLOR
+#define NRF_SDH_ANT_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
+//==========================================================
+#ifndef NRF_SDH_BLE_LOG_ENABLED
+#define NRF_SDH_BLE_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_BLE_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_BLE_LOG_LEVEL
+#define NRF_SDH_BLE_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_BLE_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_INFO_COLOR
+#define NRF_SDH_BLE_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_BLE_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_BLE_DEBUG_COLOR
+#define NRF_SDH_BLE_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
+//==========================================================
+#ifndef NRF_SDH_LOG_ENABLED
+#define NRF_SDH_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_LOG_LEVEL
+#define NRF_SDH_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_INFO_COLOR
+#define NRF_SDH_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_DEBUG_COLOR
+#define NRF_SDH_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
+//==========================================================
+#ifndef NRF_SDH_SOC_LOG_ENABLED
+#define NRF_SDH_SOC_LOG_ENABLED 0
+#endif
+// <o> NRF_SDH_SOC_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SDH_SOC_LOG_LEVEL
+#define NRF_SDH_SOC_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SDH_SOC_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_INFO_COLOR
+#define NRF_SDH_SOC_INFO_COLOR 0
+#endif
+
+// <o> NRF_SDH_SOC_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SDH_SOC_DEBUG_COLOR
+#define NRF_SDH_SOC_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
+#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
+#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
+#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
+#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
+#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
+#endif
+// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
+#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
+#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
+#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// <e> PM_LOG_ENABLED - Enable logging in Peer Manager and its submodules.
+//==========================================================
+#ifndef PM_LOG_ENABLED
+#define PM_LOG_ENABLED 1
+#endif
+// <o> PM_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef PM_LOG_LEVEL
+#define PM_LOG_LEVEL 3
+#endif
+
+// <o> PM_LOG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PM_LOG_INFO_COLOR
+#define PM_LOG_INFO_COLOR 0
+#endif
+
+// <o> PM_LOG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef PM_LOG_DEBUG_COLOR
+#define PM_LOG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// <h> nrf_log in nRF_Serialization 
+
+//==========================================================
+// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
+//==========================================================
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
+#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
+#endif
+// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL  - Default Severity level
+ 
+// <0=> Off 
+// <1=> Error 
+// <2=> Warning 
+// <3=> Info 
+// <4=> Debug 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
+#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
+#endif
+
+// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
+ 
+// <0=> Default 
+// <1=> Black 
+// <2=> Red 
+// <3=> Green 
+// <4=> Yellow 
+// <5=> Blue 
+// <6=> Magenta 
+// <7=> Cyan 
+// <8=> White 
+
+#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
+#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
+#endif
+
+// </e>
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// </e>
+
+// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED  - nrf_log_str_formatter - Log string formatter
+ 
+
+#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
+#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
+#endif
+
+// </h> 
+//==========================================================
+
+// <h> nRF_Segger_RTT 
+
+//==========================================================
+// <h> segger_rtt - SEGGER RTT
+
+//==========================================================
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. 
+// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
+// <i> or this value is actually used. It depends on which one is bigger.
+
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 4096
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Maximum number of upstream buffers. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of downstream buffer. 
+#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
+#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
+#endif
+
+// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Maximum number of downstream buffers. 
+#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
+#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
+#endif
+
+// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE  - RTT behavior if the buffer is full.
+ 
+
+// <i> The following modes are supported:
+// <i> - SKIP  - Do not block, output nothing.
+// <i> - TRIM  - Do not block, output as much as fits.
+// <i> - BLOCK - Wait until there is space in the buffer.
+// <0=> SKIP 
+// <1=> TRIM 
+// <2=> BLOCK_IF_FIFO_FULL 
+
+#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
+#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
+#endif
+
+// </h> 
+//==========================================================
+
+// </h> 
+//==========================================================
+
+// <<< end of configuration section >>>
+#endif //SDK_CONFIG_H
+

+ 7 - 0
IES-600RB-Bootloader.si4project/IES-600RB-BootLoader.snippets.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SourceInsightCodeSnippets
+	AppVer="4.00.0106"
+	AppVerMinReader="4.00.0019"
+	>
+	<SnippetList/>
+</SourceInsightCodeSnippets>

+ 9 - 0
IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.SearchResults

@@ -0,0 +1,9 @@
+---- #define NRF_BL_DFU_INACTIVITY_TIMEOUT_MS Matches (3 in 2 files) ----
+sdk_config.h (examples\dfu\secure_bootloader\pca10040_uart\config) line 190 : #define NRF_BL_DFU_INACTIVITY_TIMEOUT_MS 120000
+sdk_config.h (examples\dfu\secure_bootloader\pca10040_uart_debug\config) line 190 : //#define NRF_BL_DFU_INACTIVITY_TIMEOUT_MS 120000
+sdk_config.h (examples\dfu\secure_bootloader\pca10040_uart_debug\config) line 191 : #define NRF_BL_DFU_INACTIVITY_TIMEOUT_MS 30000
+---- Bad result code Matches (0 in 0 files) ----
+---- #define NRF_BL_DFU_INACTIVITY_TIMEOUT_MS Matches (3 in 2 files) ----
+sdk_config.h (examples\dfu\secure_bootloader\pca10040_uart\config) line 190 : #define NRF_BL_DFU_INACTIVITY_TIMEOUT_MS 120000
+sdk_config.h (examples\dfu\secure_bootloader\pca10040_uart_debug\config) line 190 : //#define NRF_BL_DFU_INACTIVITY_TIMEOUT_MS 120000
+sdk_config.h (examples\dfu\secure_bootloader\pca10040_uart_debug\config) line 191 : #define NRF_BL_DFU_INACTIVITY_TIMEOUT_MS 90000

+ 7 - 0
IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.bookmarks.xml

@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="utf-8"?>
+<SourceInsightBookmarks
+	AppVer="4.00.0106"
+	AppVerMinReader="4.00.0009"
+	>
+	<Bookmarks/>
+</SourceInsightBookmarks>

BIN
IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.sip_sym


BIN
IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.sip_xab


BIN
IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.sip_xad


BIN
IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.sip_xc


BIN
IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.sip_xf


BIN
IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.sip_xm


BIN
IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.sip_xr


BIN
IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.sip_xsb


BIN
IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.sip_xsd


BIN
IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.siproj


+ 22 - 0
IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.siproj_settings.xml

@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<ProjectSettings
+	AppVer="4.00.0106"
+	AppVerMinReader="4.00.0034"
+	GlobalConfiguration="1"
+	GlobalWorkspace="0"
+	LocalsInDb="0"
+	IndexMembers="1"
+	IndexFragments="1"
+	UseMasterFileList="0"
+	SourceDir="..\"
+	BackupDir="%PROJECT_DATA_DIR%\Backup"
+	MasterFileList="%PROJECT_SOURCE_DIR%\%PROJECT_NAME%_filelist.txt"
+	IsImportProject="0"
+	>
+	<Imports>
+		<ImportedLibs/>
+	</Imports>
+	<ParseConditions>
+		<Defines/>
+	</ParseConditions>
+</ProjectSettings>

BIN
IES-600RB-Bootloader.si4project/IES-600RB-Bootloader.siwork


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_atomic.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_clock.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_debug_interface.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_delay.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_led.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_mutex.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_rng.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_sleep.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_task_scheduler.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_timer.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_timer_critical.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_trace_interface.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_uart.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_hal_uart_task_scheduler.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_nrf52_soc_hal_nrf52_exceptions.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_nrf52_soc_hal_nrf52_rtc.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_HAL_nrf52_soc_hal_nrf52_timer.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_auto_request.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_common.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mcps_data.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mcps_purge.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_associate.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_beacon_notify.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_comm_status.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_disassociate.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_gts.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_orphan.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_pib.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_poll.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_reset.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_rx_enable.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_scan.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_start.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_mlme_sync.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_panid_conflict.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_security.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_task_scheduler.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_MAC_mac_time.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_PHY_phy_common.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_PHY_phy_pd_data.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_PHY_phy_plme_cca.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_PHY_phy_plme_ed.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_PHY_phy_plme_pib.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_PHY_phy_plme_trx.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_RAL_nrf52_soc_ral_api_spec.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_RAL_nrf52_soc_ral_fsm.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_RAL_nrf52_soc_ral_fsm_private.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_RAL_nrf52_soc_ral_irq_handlers.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_RAL_nrf52_soc_ral_rf_init.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_RAL_ral_api.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SecAL_sec_aes_ccm.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SecAL_sec_aes_entity.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_crc.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_debug.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_events.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_fsm.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_init.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_list.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_memory_manager.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_queue.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_ringbuffer.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_slab_allocator.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_sleep.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_task_scheduler.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_time.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_api_SysAL_sys_utils.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_raw_802_15_4_config.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_secure_802_15_4_config.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_src_rng_entity.c.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_802_15_4_src_sec_aes_entity.c.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_channel_config_ant_channel_config.c.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_channel_config_ant_channel_config.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_encryption_ant_encrypt_config.c.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_encryption_ant_encrypt_config.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_encryption_ant_encrypt_negotiation_slave.c.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_encryption_ant_encrypt_negotiation_slave.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_fs_antfs.c.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_fs_antfs.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_fs_crc.c.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_fs_crc.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_fs_defines.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_key_manager_ant_key_manager.c.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_key_manager_ant_key_manager.h.sisc


BIN
IES-600RB-Bootloader.si4project/cache/parse/components_ant_ant_key_manager_config_ant_key_manager_config.h.sisc


Algunos archivos no se mostraron porque demasiados archivos cambiaron en este cambio