| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305 | /** * Copyright (c) 2016 - 2020, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this *    list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic *    Semiconductor ASA integrated circuit in a product or a software update for *    such product, must reproduce the above copyright notice, this list of *    conditions and the following disclaimer in the documentation and/or other *    materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its *    contributors may be used to endorse or promote products derived from this *    software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a *    Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse *    engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */#ifndef SDK_VALIDATION_H#define SDK_VALIDATION_H#include "nrf_peripherals.h"#include "sdk_config.h"#ifdef __cplusplusextern "C" {#endif// Validate peripheral availibility#if ((defined(SAADC_ENABLED)) && (SAADC_ENABLED > 0) && (!defined(SAADC_PRESENT)))#error "SAADC not present in selected MCU."#endif#if ((defined(ADC_ENABLED)) && (ADC_ENABLED > 0) && (!defined(ADC_PRESENT)))#error "SAADC not present in selected MCU."#endif#if ((defined(I2S_ENABLED)) && (I2S_ENABLED > 0) && (!defined(I2S_PRESENT)))#error "I2S not present in selected MCU."#endif#if ((defined(COMP_ENABLED)) && (COMP_ENABLED > 0) && (!defined(COMP_PRESENT)))#error "COMP not present in selected MCU."#endif#if ((defined(LPCOMP_ENABLED)) && (LPCOMP_ENABLED > 0) && (!defined(LPCOMP_PRESENT)))#error "LPCOMP not present in selected MCU."#endif#if ((defined(SPIS0_ENABLED)) && (SPIS0_ENABLED > 0) && (!defined(SPIS_PRESENT)))#error "SPIS0 instance not present in selected MCU."#endif#if ((defined(EGU_ENABLED)) && (EGU_ENABLED > 0) && (!defined(EGU_PRESENT)))#error "EGU instance not present in selected MCU."#endif#if ((defined(NFC_HAL_ENABLED)) && (NFC_HAL_ENABLED > 0) && (!defined(NFCT_PRESENT)))#error "NFC TAG not present in selected MCU."#endif// Validate count of instances#if ((defined(RTC2_ENABLED)) && (RTC2_ENABLED > 0) && (RTC_COUNT < 2))#error "RTC2 not present in selected MCU."#endif#if ((defined(TWIS0_ENABLED) || defined(TWIS1_ENABLED)) &&\    ((TWIS0_ENABLED + TWIS1_ENABLED) > 0) &&\    (!defined(TWIS_PRESENT)))#error "TWIS not present in selected MCU."#endif#if ((defined(SPIS2_ENABLED)) && (SPIS2_ENABLED > 0) && (SPIS_COUNT < 2))#error "SPI2/SPIS2 instance not present in selected MCU."#endif#if ((defined(TIMER3_ENABLED) || defined(TIMER4_ENABLED)) &&\    ((TIMER3_ENABLED + TIMER4_ENABLED ) > 0) &&\    (TIMER_COUNT < 5))#error "TIMER3 and TIMER4 not present in selected MCU."#endif// Validate peripheral sharing feature#if !NRFX_CHECK(NRFX_PRS_ENABLED)#if ((defined(TWIM0_ENABLED) && defined(TWIS0_ENABLED)) &&\    ((TWIM0_ENABLED + TWIS0_ENABLED) > 1))#error "Peripherals overlap. TWIM0, TWIS0 - only one of these can be enabled."#endif#if ((defined(TWIM0_ENABLED) && defined(SPIM0_ENABLED)) &&\    ((TWIM0_ENABLED + SPIM0_ENABLED) > 1))#error "Peripherals overlap. TWIM0, SPIM0 - only one of these can be enabled."#endif#if ((defined(TWIM0_ENABLED) && defined(SPIS0_ENABLED)) &&\    ((TWIM0_ENABLED + SPIS0_ENABLED) > 1))#error "Peripherals overlap. TWIM0, SPIS0 - only one of these can be enabled."#endif#if ((defined(TWIM0_ENABLED) && defined(SPI0_ENABLED)) &&\    ((TWIM0_ENABLED + SPI0_ENABLED) > 1))#error "Peripherals overlap. TWIM0, SPI0 - only one of these can be enabled."#endif#if ((defined(TWIM0_ENABLED) && defined(TWI0_ENABLED)) &&\    ((TWIM0_ENABLED + TWI0_ENABLED) > 1))#error "Peripherals overlap. TWIM0, TWI0 - only one of these can be enabled."#endif#if ((defined(TWIS0_ENABLED) && defined(SPIM0_ENABLED)) &&\    ((TWIS0_ENABLED + SPIM0_ENABLED) > 1))#error "Peripherals overlap. TWIS0, SPIM0 - only one of these can be enabled."#endif#if ((defined(TWIS0_ENABLED) && defined(SPIS0_ENABLED)) &&\    ((TWIS0_ENABLED + SPIS0_ENABLED) > 1))#error "Peripherals overlap. TWIS0, SPIS0 - only one of these can be enabled."#endif#if ((defined(TWIS0_ENABLED) && defined(SPI0_ENABLED)) &&\    ((TWIS0_ENABLED + SPI0_ENABLED) > 1))#error "Peripherals overlap. TWIS0, SPI0 - only one of these can be enabled."#endif#if ((defined(TWIS0_ENABLED) && defined(TWI0_ENABLED)) &&\    ((TWIS0_ENABLED + TWI0_ENABLED) > 1))#error "Peripherals overlap. TWIS0, TWI0 - only one of these can be enabled."#endif#if ((defined(SPIM0_ENABLED) && defined(SPIS0_ENABLED)) &&\    ((SPIM0_ENABLED + SPIS0_ENABLED) > 1))#error "Peripherals overlap. SPIM0, SPIS0 - only one of these can be enabled."#endif#if ((defined(SPIM0_ENABLED) && defined(SPI0_ENABLED)) &&\    ((SPIM0_ENABLED + SPI0_ENABLED) > 1))#error "Peripherals overlap. SPIM0, SPI0 - only one of these can be enabled."#endif#if ((defined(SPIM0_ENABLED) && defined(TWI0_ENABLED)) &&\    ((SPIM0_ENABLED + TWI0_ENABLED) > 1))#error "Peripherals overlap. SPIM0, TWI0 - only one of these can be enabled."#endif#if ((defined(SPIS0_ENABLED) && defined(SPI0_ENABLED)) &&\    ((SPIS0_ENABLED + SPI0_ENABLED) > 1))#error "Peripherals overlap. SPIS0, SPI0 - only one of these can be enabled."#endif#if ((defined(SPIS0_ENABLED) && defined(TWI0_ENABLED)) &&\    ((SPIS0_ENABLED + TWI0_ENABLED) > 1))#error "Peripherals overlap. SPIS0, TWI0 - only one of these can be enabled."#endif#if ((defined(SPI0_ENABLED) && defined(TWI0_ENABLED)) &&\    ((SPI0_ENABLED + TWI0_ENABLED) > 1))#error "Peripherals overlap. SPI0, TWI0 - only one of these can be enabled."#endif#if ((defined(TWIM1_ENABLED) && defined(TWIS1_ENABLED)) &&\    ((TWIM1_ENABLED + TWIS1_ENABLED) > 1))#error "Peripherals overlap. TWIM1, TWIS1 - only one of these can be enabled."#endif#if ((defined(TWIM1_ENABLED) && defined(SPIM1_ENABLED)) &&\    ((TWIM1_ENABLED + SPIM1_ENABLED) > 1))#error "Peripherals overlap. TWIM1, SPIM1 - only one of these can be enabled."#endif#if ((defined(TWIM1_ENABLED) && defined(SPIS1_ENABLED)) &&\    ((TWIM1_ENABLED + SPIS1_ENABLED) > 1))#error "Peripherals overlap. TWIM1, SPIS1 - only one of these can be enabled."#endif#if ((defined(TWIM1_ENABLED) && defined(SPI1_ENABLED)) &&\    ((TWIM1_ENABLED + SPI1_ENABLED) > 1))#error "Peripherals overlap. TWIM1, SPI1 - only one of these can be enabled."#endif#if ((defined(TWIM1_ENABLED) && defined(TWI1_ENABLED)) &&\    ((TWIM1_ENABLED + TWI1_ENABLED) > 1))#error "Peripherals overlap. TWIM1, TWI1 - only one of these can be enabled."#endif#if ((defined(TWIS1_ENABLED) && defined(SPIM1_ENABLED)) &&\    ((TWIS1_ENABLED + SPIM1_ENABLED) > 1))#error "Peripherals overlap. TWIS1, SPIM1 - only one of these can be enabled."#endif#if ((defined(TWIS1_ENABLED) && defined(SPIS1_ENABLED)) &&\    ((TWIS1_ENABLED + SPIS1_ENABLED) > 1))#error "Peripherals overlap. TWIS1, SPIS1 - only one of these can be enabled."#endif#if ((defined(TWIS1_ENABLED) && defined(SPI1_ENABLED)) &&\    ((TWIS1_ENABLED + SPI1_ENABLED) > 1))#error "Peripherals overlap. TWIS1, SPI1 - only one of these can be enabled."#endif#if ((defined(TWIS1_ENABLED) && defined(TWI1_ENABLED)) &&\    ((TWIS1_ENABLED + TWI1_ENABLED) > 1))#error "Peripherals overlap. TWIS1, TWI1 - only one of these can be enabled."#endif#if ((defined(SPIM1_ENABLED) && defined(SPIS1_ENABLED)) &&\    ((SPIM1_ENABLED + SPIS1_ENABLED) > 1))#error "Peripherals overlap. SPIM1, SPIS1 - only one of these can be enabled."#endif#if ((defined(SPIM1_ENABLED) && defined(SPI1_ENABLED)) &&\    ((SPIM1_ENABLED + SPI1_ENABLED) > 1))#error "Peripherals overlap. SPIM1, SPI1 - only one of these can be enabled."#endif#if ((defined(SPIM1_ENABLED) && defined(TWI1_ENABLED)) &&\    ((SPIM1_ENABLED + TWI1_ENABLED) > 1))#error "Peripherals overlap. SPIM1, TWI1 - only one of these can be enabled."#endif#if ((defined(SPIS1_ENABLED) && defined(SPI1_ENABLED)) &&\    ((SPIS1_ENABLED + SPI1_ENABLED) > 1))#error "Peripherals overlap. SPIS1, SPI1 - only one of these can be enabled."#endif#if ((defined(SPIS1_ENABLED) && defined(TWI1_ENABLED)) &&\    ((SPIS1_ENABLED + TWI1_ENABLED) > 1))#error "Peripherals overlap. SPIS1, TWI1 - only one of these can be enabled."#endif#if ((defined(SPI1_ENABLED) && defined(TWI1_ENABLED)) &&\    ((SPI1_ENABLED + TWI1_ENABLED) > 1))#error "Peripherals overlap. SPI1, TWI1 - only one of these can be enabled."#endif#if ((defined(SPI2_ENABLED) && defined(SPIS2_ENABLED)) &&\    ((SPI2_ENABLED + SPIS2_ENABLED) > 1))#error "Peripherals overlap. SPI2, SPIS2 - only one of these can be enabled."#endif#if ((defined(SPIM2_ENABLED) && defined(SPIS2_ENABLED)) &&\    ((SPI2_ENABLED + SPIS2_ENABLED) > 1))#error "Peripherals overlap. SPIM2, SPIS2 - only one of these can be enabled."#endif#if ((defined(SPIM2_ENABLED) && defined(SPI2_ENABLED)) &&\    ((SPI2_ENABLED + SPIS2_ENABLED) > 1))#error "Peripherals overlap. SPIM2, SPI2 - only one of these can be enabled."#endif#endif // !NRFX_CHECK(NRFX_PRS_ENABLED)#ifdef NFCT_PRESENT#if ((defined(NFC_HAL_ENABLED) && defined(NRF_CLOCK_ENABLED)) &&\    ((NFC_HAL_ENABLED) && (!NRF_CLOCK_ENABLED)))#error "NFC_HAL requires CLOCK to work. NFC_HAL can not be enabled without CLOCK."#endif#if ((defined(NFC_HAL_ENABLED) && defined(TIMER4_ENABLED)) &&\    ((NFC_HAL_ENABLED + TIMER4_ENABLED) > 1))#error "TIMER4 is used by NFC_HAL. NFC_HAL, TIMER4 - only one of these can be enabled."#endif#endif// Complex driver validation#ifdef LPCOMP_PRESENT#if ((defined(COMP_ENABLED) && defined(LPCOMP_ENABLED)) && \     (!NRFX_CHECK(NRFX_PRS_ENABLED)) && \     ((COMP_ENABLED + LPCOMP_ENABLED) > 1))#error "Peripherals overlap. COMP, LPCOMP - only one of these can be enabled."#endif#endif#ifdef __cplusplus}#endif#endif // SDK_VALIDATION_H
 |