/**
 * Copyright (c) 2015 - 2020, Nordic Semiconductor ASA
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice, this
 *    list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form, except as embedded into a Nordic
 *    Semiconductor ASA integrated circuit in a product or a software update for
 *    such product, must reproduce the above copyright notice, this list of
 *    conditions and the following disclaimer in the documentation and/or other
 *    materials provided with the distribution.
 *
 * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
 *    contributors may be used to endorse or promote products derived from this
 *    software without specific prior written permission.
 *
 * 4. This software, with or without modification, must only be used with a
 *    Nordic Semiconductor ASA integrated circuit.
 *
 * 5. Any software provided in binary form under this license must not be reverse
 *    engineered, decompiled, modified and/or disassembled.
 *
 * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */

#ifndef NRFX_TWI_H__
#define NRFX_TWI_H__

#include <nrfx.h>
#include <nrfx_twi_twim.h>
#include <hal/nrf_twi.h>

#ifdef __cplusplus
extern "C" {
#endif

/**
 * @defgroup nrfx_twi TWI driver
 * @{
 * @ingroup nrf_twi
 * @brief   Two Wire Interface master (TWI) peripheral driver.
 */

/**
 * @brief Structure for the TWI master driver instance.
 */
typedef struct
{
    NRF_TWI_Type * p_twi;        ///< Pointer to a structure with TWI registers.
    uint8_t        drv_inst_idx; ///< Index of the driver instance. For internal use only.
} nrfx_twi_t;

/** @brief Macro for creating a TWI master driver instance. */
#define NRFX_TWI_INSTANCE(id)                               \
{                                                           \
    .p_twi        = NRFX_CONCAT_2(NRF_TWI, id),             \
    .drv_inst_idx = NRFX_CONCAT_3(NRFX_TWI, id, _INST_IDX), \
}

#ifndef __NRFX_DOXYGEN__
enum {
#if NRFX_CHECK(NRFX_TWI0_ENABLED)
    NRFX_TWI0_INST_IDX,
#endif
#if NRFX_CHECK(NRFX_TWI1_ENABLED)
    NRFX_TWI1_INST_IDX,
#endif
    NRFX_TWI_ENABLED_COUNT
};
#endif

/** @brief Structure for the configuration of the TWI master driver instance. */
typedef struct
{
    uint32_t            scl;                ///< SCL pin number.
    uint32_t            sda;                ///< SDA pin number.
    nrf_twi_frequency_t frequency;          ///< TWI frequency.
    uint8_t             interrupt_priority; ///< Interrupt priority.
    bool                hold_bus_uninit;    ///< Hold pull up state on GPIO pins after uninit.
} nrfx_twi_config_t;

/** @brief The default configuration of the TWI master driver instance. */
#define NRFX_TWI_DEFAULT_CONFIG                                                   \
{                                                                                 \
    .frequency          = (nrf_twi_frequency_t)NRFX_TWI_DEFAULT_CONFIG_FREQUENCY, \
    .scl                = 31,                                                     \
    .sda                = 31,                                                     \
    .interrupt_priority = NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY,                   \
    .hold_bus_uninit    = NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT,                \
}

/** @brief Flag indicating that the interrupt after each transfer will be suppressed, and the event handler will not be called. */
#define NRFX_TWI_FLAG_NO_XFER_EVT_HANDLER (1UL << 2)
/** @brief Flag indicating that the TX transfer will not end with a stop condition. */
#define NRFX_TWI_FLAG_TX_NO_STOP          (1UL << 5)
/** @brief Flag indicating that the transfer will be suspended. */
#define NRFX_TWI_FLAG_SUSPEND             (1UL << 6)

/** @brief TWI master driver event types. */
typedef enum
{
    NRFX_TWI_EVT_DONE,         ///< Transfer completed event.
    NRFX_TWI_EVT_ADDRESS_NACK, ///< Error event: NACK received after sending the address.
    NRFX_TWI_EVT_DATA_NACK,    ///< Error event: NACK received after sending a data byte.
    NRFX_TWI_EVT_OVERRUN,      ///< Error event: The unread data is replaced by new data.
    NRFX_TWI_EVT_BUS_ERROR     ///< Error event: An unexpected transition occurred on the bus.
} nrfx_twi_evt_type_t;

/** @brief TWI master driver transfer types. */
typedef enum
{
    NRFX_TWI_XFER_TX,   ///< TX transfer.
    NRFX_TWI_XFER_RX,   ///< RX transfer.
    NRFX_TWI_XFER_TXRX, ///< TX transfer followed by RX transfer with repeated start.
    NRFX_TWI_XFER_TXTX  ///< TX transfer followed by TX transfer with repeated start.
} nrfx_twi_xfer_type_t;

/** @brief Structure for a TWI transfer descriptor. */
typedef struct
{
    nrfx_twi_xfer_type_t    type;             ///< Type of transfer.
    uint8_t                 address;          ///< Slave address.
    size_t                  primary_length;   ///< Number of bytes transferred.
    size_t                  secondary_length; ///< Number of bytes transferred.
    uint8_t *               p_primary_buf;    ///< Pointer to transferred data.
    uint8_t *               p_secondary_buf;  ///< Pointer to transferred data.
} nrfx_twi_xfer_desc_t;


/** @brief Macro for setting the TX transfer descriptor. */
#define NRFX_TWI_XFER_DESC_TX(addr, p_data, length) \
{                                                   \
    .type             = NRFX_TWI_XFER_TX,           \
    .address          = (addr),                     \
    .primary_length   = (length),                   \
    .secondary_length = 0,                          \
    .p_primary_buf    = (p_data),                   \
    .p_secondary_buf  = NULL,                       \
}

/** @brief Macro for setting the RX transfer descriptor. */
#define NRFX_TWI_XFER_DESC_RX(addr, p_data, length) \
{                                                   \
    .type             = NRFX_TWI_XFER_RX,           \
    .address          = (addr),                     \
    .primary_length   = (length),                   \
    .secondary_length = 0,                          \
    .p_primary_buf    = (p_data),                   \
    .p_secondary_buf  = NULL,                       \
}

/** @brief Macro for setting the TX-RX transfer descriptor. */
#define NRFX_TWI_XFER_DESC_TXRX(addr, p_tx, tx_len, p_rx, rx_len) \
{                                                                 \
    .type             = NRFX_TWI_XFER_TXRX,                       \
    .address          = (addr),                                   \
    .primary_length   = (tx_len),                                 \
    .secondary_length = (rx_len),                                 \
    .p_primary_buf    = (p_tx),                                   \
    .p_secondary_buf  = (p_rx),                                   \
}

/** @brief Macro for setting the TX-TX transfer descriptor. */
#define NRFX_TWI_XFER_DESC_TXTX(addr, p_tx, tx_len, p_tx2, tx_len2) \
{                                                                   \
    .type             = NRFX_TWI_XFER_TXTX,                         \
    .address          = (addr),                                     \
    .primary_length   = (tx_len),                                   \
    .secondary_length = (tx_len2),                                  \
    .p_primary_buf    = (p_tx),                                     \
    .p_secondary_buf  = (p_tx2),                                    \
}

/** @brief Structure for a TWI event. */
typedef struct
{
    nrfx_twi_evt_type_t  type;      ///< Event type.
    nrfx_twi_xfer_desc_t xfer_desc; ///< Transfer details.
} nrfx_twi_evt_t;

/** @brief TWI event handler prototype. */
typedef void (* nrfx_twi_evt_handler_t)(nrfx_twi_evt_t const * p_event,
                                        void *                 p_context);

/**
 * @brief Function for initializing the TWI driver instance.
 *
 * @param[in] p_instance    Pointer to the driver instance structure.
 * @param[in] p_config      Pointer to the structure with the initial configuration.
 * @param[in] event_handler Event handler provided by the user. If NULL, blocking mode is enabled.
 * @param[in] p_context     Context passed to event handler.
 *
 * @retval NRFX_SUCCESS             Initialization is successful.
 * @retval NRFX_ERROR_INVALID_STATE The driver is in invalid state.
 * @retval NRFX_ERROR_BUSY          Some other peripheral with the same
 *                                  instance ID is already in use. This is
 *                                  possible only if @ref nrfx_prs module
 *                                  is enabled.
 */
nrfx_err_t nrfx_twi_init(nrfx_twi_t const *        p_instance,
                         nrfx_twi_config_t const * p_config,
                         nrfx_twi_evt_handler_t    event_handler,
                         void *                    p_context);

/**
 * @brief Function for uninitializing the TWI instance.
 *
 * @param[in] p_instance Pointer to the driver instance structure.
 */
void nrfx_twi_uninit(nrfx_twi_t const * p_instance);

/**
 * @brief Function for enabling the TWI instance.
 *
 * @param[in] p_instance Pointer to the driver instance structure.
 */
void nrfx_twi_enable(nrfx_twi_t const * p_instance);

/**
 * @brief Function for disabling the TWI instance.
 *
 * @param[in] p_instance Pointer to the driver instance structure.
 */
void nrfx_twi_disable(nrfx_twi_t const * p_instance);

/**
 * @brief Function for sending data to a TWI slave.
 *
 * The transmission will be stopped when an error occurs. If a transfer is ongoing,
 * the function returns the error code @ref NRFX_ERROR_BUSY.
 *
 * @note This function is deprecated. Use @ref nrfx_twi_xfer instead.
 *
 * @param[in] p_instance Pointer to the driver instance structure.
 * @param[in] address    Address of a specific slave device (only 7 LSB).
 * @param[in] p_data     Pointer to a transmit buffer.
 * @param[in] length     Number of bytes to send.
 * @param[in] no_stop    If set, the stop condition is not generated on the bus
 *                       after the transfer has completed successfully (allowing
 *                       for a repeated start in the next transfer).
 *
 * @retval NRFX_SUCCESS                 The procedure is successful.
 * @retval NRFX_ERROR_BUSY              The driver is not ready for a new transfer.
 * @retval NRFX_ERROR_INTERNAL          An error is detected by hardware.
 * @retval NRFX_ERROR_INVALID_STATE     RX transaction is suspended on bus.
 * @retval NRFX_ERROR_DRV_TWI_ERR_ANACK Negative acknowledgement (NACK) is received after sending
 *                                      the address in polling mode.
 * @retval NRFX_ERROR_DRV_TWI_ERR_DNACK Negative acknowledgement (NACK) is received after sending
 *                                      a data byte in polling mode.
 */
nrfx_err_t nrfx_twi_tx(nrfx_twi_t const * p_instance,
                       uint8_t            address,
                       uint8_t const *    p_data,
                       size_t             length,
                       bool               no_stop);

/**
 * @brief Function for reading data from a TWI slave.
 *
 * The transmission will be stopped when an error occurs. If a transfer is ongoing,
 * the function returns the error code @ref NRFX_ERROR_BUSY.
 *
 * @note This function is deprecated. Use @ref nrfx_twi_xfer instead.
 *
 * @param[in] p_instance Pointer to the driver instance structure.
 * @param[in] address    Address of a specific slave device (only 7 LSB).
 * @param[in] p_data     Pointer to a receive buffer.
 * @param[in] length     Number of bytes to be received.
 *
 * @retval NRFX_SUCCESS                   The procedure is successful.
 * @retval NRFX_ERROR_BUSY                The driver is not ready for a new transfer.
 * @retval NRFX_ERROR_INTERNAL            An error is detected by hardware.
 * @retval NRFX_ERROR_INVALID_STATE       TX transaction is suspended on bus.
 * @retval NRFX_ERROR_DRV_TWI_ERR_OVERRUN The unread data is replaced by new data.
 * @retval NRFX_ERROR_DRV_TWI_ERR_ANACK   Negative acknowledgement (NACK) is received after sending
 *                                        the address in polling mode.
 * @retval NRFX_ERROR_DRV_TWI_ERR_DNACK   Negative acknowledgement (NACK) is received after sending
 *                                        a data byte in polling mode.
 */
nrfx_err_t nrfx_twi_rx(nrfx_twi_t const * p_instance,
                       uint8_t            address,
                       uint8_t *          p_data,
                       size_t             length);


/**
 * @brief Function for performing a TWI transfer.
 *
 * The following transfer types can be configured (@ref nrfx_twi_xfer_desc_t::type):
 * - @ref NRFX_TWI_XFER_TXRX - Write operation followed by a read operation (without STOP condition in between).
 * - @ref NRFX_TWI_XFER_TXTX - Write operation followed by a write operation (without STOP condition in between).
 * - @ref NRFX_TWI_XFER_TX - Write operation (with or without STOP condition).
 * - @ref NRFX_TWI_XFER_RX - Read operation  (with STOP condition).
 *
 * @note TX-RX and TX-TX transfers are supported only in non-blocking mode.
 *
 * Additional options are provided using the flags parameter:
 * - @ref NRFX_TWI_FLAG_NO_XFER_EVT_HANDLER - No user event handler after transfer completion. In most cases, this also means no interrupt at the end of the transfer.
 * - @ref NRFX_TWI_FLAG_TX_NO_STOP - No stop condition after TX transfer.
 * - @ref NRFX_TWI_FLAG_SUSPEND - Transfer will be suspended. This allows for combining multiple transfers into one transaction.
 *                                Only transactions with the same direction can be combined. To finish the transaction, call the function without this flag.
 *
 * @note
 * Some flag combinations are invalid:
 * - @ref NRFX_TWI_FLAG_TX_NO_STOP with @ref nrfx_twi_xfer_desc_t::type different than @ref NRFX_TWI_XFER_TX
 *
 * @param[in] p_instance  Pointer to the driver instance structure.
 * @param[in] p_xfer_desc Pointer to the transfer descriptor.
 * @param[in] flags       Transfer options (0 for default settings).
 *
 * @retval NRFX_SUCCESS                   The procedure is successful.
 * @retval NRFX_ERROR_BUSY                The driver is not ready for a new transfer.
 * @retval NRFX_ERROR_NOT_SUPPORTED       The provided parameters are not supported.
 * @retval NRFX_ERROR_INTERNAL            An unexpected transition occurred on the bus.
 * @retval NRFX_ERROR_INVALID_STATE       Other direction of transaction is suspended on the bus.
 * @retval NRFX_ERROR_DRV_TWI_ERR_OVERRUN The unread data is replaced by new data (TXRX and RX)
 * @retval NRFX_ERROR_DRV_TWI_ERR_ANACK   Negative acknowledgement (NACK) is received after sending
 *                                        the address in polling mode.
 * @retval NRFX_ERROR_DRV_TWI_ERR_DNACK   Negative acknowledgement (NACK) is received after sending
 *                                        a data byte in polling mode.
 */
nrfx_err_t nrfx_twi_xfer(nrfx_twi_t           const * p_instance,
                         nrfx_twi_xfer_desc_t const * p_xfer_desc,
                         uint32_t                     flags);

/**
 * @brief Function for checking the TWI driver state.
 *
 * @param[in] p_instance TWI instance.
 *
 * @retval true  The TWI driver is currently busy performing a transfer.
 * @retval false The TWI driver is ready for a new transfer.
 */
bool nrfx_twi_is_busy(nrfx_twi_t const * p_instance);

/**
 * @brief Function for getting the transferred data count.
 *
 * @param[in] p_instance Pointer to the driver instance structure.
 *
 * @return Data count.
 */
size_t nrfx_twi_data_count_get(nrfx_twi_t const * const p_instance);

/**
 * @brief Function for returning the address of a STOPPED TWI event.
 *
 * A STOPPED event can be used to detect the end of a transfer if the @ref NRFX_TWI_FLAG_NO_XFER_EVT_HANDLER
 * option is used.
 *
 * @param[in] p_instance Pointer to the driver instance structure.
 *
 * @return STOPPED event address.
 */
uint32_t nrfx_twi_stopped_event_get(nrfx_twi_t const * p_instance);

/**
 * @brief Function for recovering the bus.
 *
 * This function checks if the bus is not stuck because of a slave holding the SDA line in the low state,
 * and if needed it performs required number of pulses on the SCL line to make the slave release the SDA line.
 * Finally, the function generates a STOP condition on the bus to put it into a known state.
 *
 * @note This function can be used only if the TWI driver is uninitialized.
 *
 * @param[in] scl_pin SCL pin number.
 * @param[in] sda_pin SDA pin number.
 *
 * @retval NRFX_SUCCESS        Bus recovery was successful.
 * @retval NRFX_ERROR_INTERNAL Bus recovery failed.
 */
__STATIC_INLINE nrfx_err_t nrfx_twi_bus_recover(uint32_t scl_pin, uint32_t sda_pin);

#ifndef SUPPRESS_INLINE_IMPLEMENTATION
__STATIC_INLINE nrfx_err_t nrfx_twi_bus_recover(uint32_t scl_pin, uint32_t sda_pin)
{
    return nrfx_twi_twim_bus_recover(scl_pin, sda_pin);
}
#endif

/** @} */


void nrfx_twi_0_irq_handler(void);
void nrfx_twi_1_irq_handler(void);


#ifdef __cplusplus
}
#endif

#endif // NRFX_TWI_H__