123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118 |
- /**
- * Copyright (c) 2014 - 2020, Nordic Semiconductor ASA
- *
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form, except as embedded into a Nordic
- * Semiconductor ASA integrated circuit in a product or a software update for
- * such product, must reproduce the above copyright notice, this list of
- * conditions and the following disclaimer in the documentation and/or other
- * materials provided with the distribution.
- *
- * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
- * contributors may be used to endorse or promote products derived from this
- * software without specific prior written permission.
- *
- * 4. This software, with or without modification, must only be used with a
- * Nordic Semiconductor ASA integrated circuit.
- *
- * 5. Any software provided in binary form under this license must not be reverse
- * engineered, decompiled, modified and/or disassembled.
- *
- * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
- * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
- #ifndef CONN_MW_NRF_SOC_H__
- #define CONN_MW_NRF_SOC_H__
- /**
- * @addtogroup ser_mw_common_codecs
- * @{
- */
- #include <stdint.h>
- #ifdef __cplusplus
- extern "C" {
- #endif
- /**@brief Handles @ref sd_power_system_off command request.
- *
- * @param[in] p_rx_buf Pointer to input buffer.
- * @param[in] rx_buf_len Size of @p p_rx_buf.
- * @param[out] p_tx_buf Pointer to output buffer.
- * @param[in,out] p_tx_buf_len \c in: Size of \p p_tx_buf buffer.
- * \c out: Length of valid data in \p p_tx_buf.
- *
- * @retval NRF_SUCCESS Handler success.
- * @retval NRF_ERROR_NULL Handler failure. NULL pointer supplied.
- * @retval NRF_ERROR_INVALID_LENGTH Handler failure. Incorrect buffer length.
- * @retval NRF_ERROR_INVALID_PARAM Handler failure. Invalid operation type.
- * @retval NRF_ERROR_NOT_SUPPORTED Handler failure. Opcode not supported.
- */
- uint32_t conn_mw_power_system_off(uint8_t const * const p_rx_buf,
- uint32_t rx_buf_len,
- uint8_t * const p_tx_buf,
- uint32_t * const p_tx_buf_len);
- /**@brief Handles @ref sd_temp_get command request and prepares response.
- *
- * @param[in] p_rx_buf Pointer to input buffer.
- * @param[in] rx_buf_len Size of @p p_rx_buf.
- * @param[out] p_tx_buf Pointer to output buffer.
- * @param[in,out] p_tx_buf_len \c in: Size of \p p_tx_buf buffer.
- * \c out: Length of valid data in \p p_tx_buf.
- *
- * @retval NRF_SUCCESS Handler success.
- * @retval NRF_ERROR_NULL Handler failure. NULL pointer supplied.
- * @retval NRF_ERROR_INVALID_LENGTH Handler failure. Incorrect buffer length.
- * @retval NRF_ERROR_INVALID_PARAM Handler failure. Invalid operation type.
- * @retval NRF_ERROR_NOT_SUPPORTED Handler failure. Opcode not supported.
- */
- uint32_t conn_mw_temp_get(uint8_t const * const p_rx_buf,
- uint32_t rx_buf_len,
- uint8_t * const p_tx_buf,
- uint32_t * const p_tx_buf_len);
- /**@brief Handles @ref sd_ecb_block_encrypt command request and prepares response.
- *
- * @param[in] p_rx_buf Pointer to input buffer.
- * @param[in] rx_buf_len Size of @p p_rx_buf.
- * @param[out] p_tx_buf Pointer to output buffer.
- * @param[in,out] p_tx_buf_len \c in: Size of \p p_tx_buf buffer.
- * \c out: Length of valid data in \p p_tx_buf.
- *
- * @retval NRF_SUCCESS Handler success.
- * @retval NRF_ERROR_NULL Handler failure. NULL pointer supplied.
- * @retval NRF_ERROR_INVALID_LENGTH Handler failure. Incorrect buffer length.
- * @retval NRF_ERROR_INVALID_PARAM Handler failure. Invalid operation type.
- * @retval NRF_ERROR_NOT_SUPPORTED Handler failure. Opcode not supported.
- */
- uint32_t conn_mw_ecb_block_encrypt(uint8_t const * const p_rx_buf,
- uint32_t rx_buf_len,
- uint8_t * const p_tx_buf,
- uint32_t * const p_tx_buf_len);
- #ifdef __cplusplus
- }
- #endif
- /** @} */
- #endif
|