/**
 * Copyright (c) 2013 - 2020, Nordic Semiconductor ASA
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice, this
 *    list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form, except as embedded into a Nordic
 *    Semiconductor ASA integrated circuit in a product or a software update for
 *    such product, must reproduce the above copyright notice, this list of
 *    conditions and the following disclaimer in the documentation and/or other
 *    materials provided with the distribution.
 *
 * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
 *    contributors may be used to endorse or promote products derived from this
 *    software without specific prior written permission.
 *
 * 4. This software, with or without modification, must only be used with a
 *    Nordic Semiconductor ASA integrated circuit.
 *
 * 5. Any software provided in binary form under this license must not be reverse
 *    engineered, decompiled, modified and/or disassembled.
 *
 * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */
#ifndef BLE_GATTS_APP_H__
#define BLE_GATTS_APP_H__

/**@file
 *
 * @defgroup ble_gatts_app GATTS Application command request encoders and command response decoders
 * @{
 * @ingroup  ser_app_s130_codecs
 *
 * @brief    GATTS Application command request encoders and command response decoders.
 */
#include "ble_gatts.h"
#include "ble.h"

#ifdef __cplusplus
extern "C" {
#endif

/**@brief Encodes @ref sd_ble_gatts_value_get command request.
 *
 * @sa @ref ble_gatts_value_get_rsp_dec for command response decoder.
 *
 * @param[in] conn_handle    Connection handle.
 * @param[in] handle         Attribute handle.
 * @param[in] p_value        Pointer to attribute value information.
 * @param[in] p_buf          Pointer to buffer where encoded data command will be returned.
 * @param[in,out] p_buf_len  \c in: Size of \p p_buf buffer.
 *                           \c out: Length of encoded command packet.
 *
 * @note  \p p_data_len and \p p_data will not be updated by the command
 *        request encoder. Updated values are set by @ref ble_gatts_value_get_rsp_dec.
 *
 * @retval NRF_SUCCESS                Encoding success.
 * @retval NRF_ERROR_NULL             Encoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH   Encoding failure. Incorrect buffer length.
 */
uint32_t ble_gatts_value_get_req_enc(uint16_t                        conn_handle,
                                     uint16_t                        handle,
                                     ble_gatts_value_t const * const p_value,
                                     uint8_t * const                 p_buf,
                                     uint32_t * const                p_buf_len);

/**@brief Decodes response to @ref sd_ble_gatts_value_get command.
 *
 * @sa @ref ble_gatts_value_get_req_enc for command request encoder.
 *
 * @param[in]  p_buf           Pointer to beginning of command response packet.
 * @param[in]  packet_len      Length (in bytes) of response packet.
 * @param[out] p_value         Pointer to structure where the attribute value will be stored.
 * @param[out] p_result_code   Command result code.
 *
 * @retval NRF_SUCCESS               Decoding success.
 * @retval NRF_ERROR_NULL            Decoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH  Decoding failure. Incorrect buffer length.
 * @retval NRF_ERROR_DATA_SIZE       Length of \p p_value is too small to hold decoded
 *                                   value from response.
 */
uint32_t ble_gatts_value_get_rsp_dec(uint8_t const * const      p_buf,
                                     uint32_t                   packet_len,
                                     ble_gatts_value_t *  const p_value,
                                     uint32_t * const           p_result_code);

/**@brief Encodes @ref sd_ble_gatts_hvx command request.
 *
 * @sa @ref ble_gatts_hvx_rsp_dec for command response decoder.
 *
 * @param[in] conn_handle    Connection handle.
 * @param[in] p_hvx_params   Pointer to an HVx parameters structure to be encoded.
 * @param[in] p_buf          Pointer to buffer where encoded data command will be returned.
 * @param[in,out] p_buf_len  \c in: Size of \p p_buf buffer.
 *                           \c out: Length of encoded command packet.
 *
 * @note  \p p_hvx_params will not be updated by the command
 *        request encoder. Updated values are set by @ref ble_gatts_hvx_rsp_dec.
 *
 * @retval NRF_SUCCESS                Encoding success.
 * @retval NRF_ERROR_NULL             Encoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH   Encoding failure. Incorrect buffer length.
 */
uint32_t ble_gatts_hvx_req_enc(uint16_t                             conn_handle,
                               ble_gatts_hvx_params_t const * const p_hvx_params,
                               uint8_t * const                      p_buf,
                               uint32_t * const                     p_buf_len);

/**@brief Decodes response to @ref sd_ble_gatts_hvx command.
 *
 * @sa @ref ble_gatts_hvx_req_enc for command request encoder.
 *
 * @param[in]  p_buf            Pointer to beginning of command response packet.
 * @param[in]  packet_len       Length (in bytes) of response packet.
 * @param[out] p_result_code    Command result code.
 * @param[out] pp_bytes_written Pointer to pointer to location where number of bytes is written.
 *
 * @retval NRF_SUCCESS               Decoding success.
 * @retval NRF_ERROR_NULL            Decoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH  Decoding failure. Incorrect buffer length.
 * @retval NRF_ERROR_INVALID_DATA    Decoding failure. Decoded operation code does not match
 *                                   expected operation code.
 */
uint32_t ble_gatts_hvx_rsp_dec(uint8_t const * const p_buf,
                               uint32_t              packet_len,
                               uint32_t * const      p_result_code,
                               uint16_t * * const    pp_bytes_written);

/**@brief Encodes @ref sd_ble_gatts_characteristic_add command request.
 *
 * @sa @ref ble_gatts_characteristic_add_rsp_dec for command response decoder.
 *
 * @param[in] service_handle     Handle of the service where the characteristic is to be placed.
 *                               If @ref BLE_GATT_HANDLE_INVALID is used, it will be placed
 *                               sequentially.
 * @param[in] p_char_md          Pointer to a @ref ble_gatts_char_md_t structure, characteristic
 *                               metadata.
 * @param[in] p_attr_char_value  Pointer to a @ref ble_gatts_attr_t structure, corresponding to
 *                               the characteristic value.
 * @param[in] p_handles          Pointer to a @ref ble_gatts_char_handles_t structure, where the
 *                               assigned handles will be stored.
 * @param[in] p_buf              Pointer to buffer where encoded data command will be returned.
 * @param[in,out] p_buf_len      \c in: Size of \p p_buf buffer.
 *                               \c out: Length of encoded command packet.
 *
 * @note  \p p_handles will not be updated by the command
 *        request encoder. Updated values are set by @ref ble_gatts_characteristic_add_rsp_dec.
 *
 * @retval NRF_SUCCESS                Encoding success.
 * @retval NRF_ERROR_NULL             Encoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH   Encoding failure. Incorrect buffer length.
 */
uint32_t ble_gatts_characteristic_add_req_enc
    (uint16_t                              service_handle,
    ble_gatts_char_md_t const * const      p_char_md,
    ble_gatts_attr_t const * const         p_attr_char_value,
    ble_gatts_char_handles_t const * const p_handles,
    uint8_t * const                        p_buf,
    uint32_t * const                       p_buf_len);

/**@brief Decodes response to @ref sd_ble_gatts_characteristic_add command.
 *
 * @sa @ref ble_gatts_characteristic_add_req_enc for command request encoder.
 *
 * @param[in]  p_buf              Pointer to beginning of command response packet.
 * @param[in]  packet_len         Length (in bytes) of response packet.
 * @param[out] pp_handles         Pointer to pointer to location where handles should be decoded.
 * @param[out] p_result_code      Pointer to command result code decode location.
 *
 * @retval NRF_SUCCESS               Decoding success.
 * @retval NRF_ERROR_NULL            Decoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH  Decoding failure. Incorrect buffer length.
 * @retval NRF_ERROR_INVALID_DATA    Decoding failure. Decoded operation code does not match
 *                                   expected operation code.
 */
uint32_t ble_gatts_characteristic_add_rsp_dec(uint8_t const * const p_buf,
                                              uint32_t              packet_len,
                                              uint16_t * * const    pp_handles,
                                              uint32_t * const      p_result_code);


/**@brief Encodes @ref sd_ble_gatts_service_add command request.
 *
 * @sa @ref ble_gatts_service_add_rsp_dec for command response decoder.
 *
 * @param[in] type           Toggles between primary and secondary services,
 *                           see @ref BLE_GATTS_SRVC_TYPES.
 * @param[in] p_uuid         Pointer to service UUID.
 * @param[in] p_conn_handle  Pointer to a 16-bit word where the assigned handle will be stored.
 * @param[in] p_buf          Pointer to buffer where encoded data command will be returned.
 * @param[in,out] p_buf_len  \c in: Size of \p p_buf buffer.
 *                           \c out: Length of encoded command packet.
 *
 * @note  \p p_conn_handle will not be updated by the command
 *        request encoder. Updated values are set by @ref ble_gatts_service_add_rsp_dec.
 *
 * @retval NRF_SUCCESS                Encoding success.
 * @retval NRF_ERROR_NULL             Encoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH   Encoding failure. Incorrect buffer length.
 */
uint32_t ble_gatts_service_add_req_enc(uint8_t                  type,
                                       ble_uuid_t const * const p_uuid,
                                       uint16_t const * const   p_conn_handle,
                                       uint8_t * const          p_buf,
                                       uint32_t * const         p_buf_len);

/**@brief Decodes response to @ref sd_ble_gatts_service_add command.
 *
 * @sa @ref ble_gatts_service_add_req_enc for command request encoder.
 *
 * @param[in]  p_buf          Pointer to beginning of command response packet.
 * @param[in]  packet_len     Length (in bytes) of response packet.
 * @param[out] p_conn_handle  Connection handle.
 * @param[out] p_result_code  Command result code.
 *
 * @retval NRF_SUCCESS               Decoding success.
 * @retval NRF_ERROR_NULL            Decoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH  Decoding failure. Incorrect buffer length.
 * @retval NRF_ERROR_INVALID_DATA    Decoding failure. Decoded operation code does not match
 *                                   expected operation code.
 */
uint32_t ble_gatts_service_add_rsp_dec(uint8_t const * const p_buf,
                                       uint32_t              packet_len,
                                       uint16_t * const      p_conn_handle,
                                       uint32_t * const      p_result_code);

/**@brief Encodes @ref sd_ble_gatts_sys_attr_set command request.
 *
 * @sa @ref ble_gatts_sys_attr_set_rsp_dec for command response decoder.
 *
 * @param[in] conn_handle        Connection handle.
 * @param[in] p_sys_attr_data    Pointer to a buffer (at least \p sys_attr_data_len bytes long)
 *                               containing the attribute value to write.
 * @param[in] sys_attr_data_len  Length (in bytes) of \p p_sys_attr_data.
 * @param[in] flags              Optional additional flags.
 * @param[in] p_buf              Pointer to buffer where encoded data command will be returned.
 * @param[in,out] p_buf_len      \c in: Size of \p p_buf buffer.
 *                               \c out: Length of encoded command packet.
 *
 * @retval NRF_SUCCESS                Encoding success.
 * @retval NRF_ERROR_NULL             Encoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH   Encoding failure. Incorrect buffer length.
 */
uint32_t ble_gatts_sys_attr_set_req_enc(uint16_t              conn_handle,
                                        uint8_t const * const p_sys_attr_data,
                                        uint16_t              sys_attr_data_len,
                                        uint32_t              flags,
                                        uint8_t * const       p_buf,
                                        uint32_t * const      p_buf_len);

/**@brief Decodes response to @ref sd_ble_gatts_sys_attr_set command.
 *
 * @sa @ref ble_gatts_sys_attr_set_req_enc for command request encoder.
 *
 * @param[in]  p_buf          Pointer to beginning of command response packet.
 * @param[in]  packet_len     Length (in bytes) of response packet.
 * @param[out] p_result_code  Command result code.
 *
 * @retval NRF_SUCCESS               Decoding success.
 * @retval NRF_ERROR_NULL            Decoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH  Decoding failure. Incorrect buffer length.
 * @retval NRF_ERROR_INVALID_DATA    Decoding failure. Decoded operation code does not match
 *                                   expected operation code.
 */
uint32_t ble_gatts_sys_attr_set_rsp_dec(uint8_t const * const p_buf,
                                        uint32_t              packet_len,
                                        uint32_t * const      p_result_code);

/**@brief Encodes @ref sd_ble_gatts_value_set command request.
 *
 * @sa @ref ble_gatts_value_set_rsp_dec for command response decoder.
 *
 * @param[in] conn_handle    Connection handle.
 * @param[in] handle         Attribute handle.
 * @param[in] p_value        Pointer to attribute value information.
 * @param[in] p_buf          Pointer to buffer where encoded data command will be returned.
 * @param[in,out] p_buf_len  \c in: Size of \p p_buf buffer.
 *                           \c out: Length of encoded command packet.
 *
 * @retval NRF_SUCCESS                Encoding success.
 * @retval NRF_ERROR_NULL             Encoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH   Encoding failure. Incorrect buffer length.
 */
uint32_t ble_gatts_value_set_req_enc(uint16_t             conn_handle,
                                     uint16_t             handle,
                                     ble_gatts_value_t *  p_value,
                                     uint8_t * const      p_buf,
                                     uint32_t * const     p_buf_len);

/**@brief Decodes response to @ref sd_ble_gatts_value_set command.
 *
 * @sa @ref ble_gatts_value_set_req_enc for command request encoder.
 *
 * @param[in]  p_buf          Pointer to beginning of command response packet.
 * @param[in]  packet_len     Length (in bytes) of response packet.
 * @param[out] p_value        Pointer to attribute value information.
 * @param[out] p_result_code  Command result code.
 *
 * @retval NRF_SUCCESS               Decoding success.
 * @retval NRF_ERROR_NULL            Decoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH  Decoding failure. Incorrect buffer length.
 * @retval NRF_ERROR_INVALID_DATA    Decoding failure. Decoded operation code does not match
 *                                   expected operation code.
 */
uint32_t ble_gatts_value_set_rsp_dec(uint8_t const * const       p_buf,
                                     uint32_t                    packet_len,
                                     ble_gatts_value_t * const   p_value,
                                     uint32_t * const            p_result_code);

/**@brief Encodes @ref sd_ble_gatts_sys_attr_get command request.
 *
 * @sa @ref ble_gatts_sys_attr_get_rsp_dec for command response decoder.
 *
 * @param[in]     conn_handle          Connection handle of the connection.
 * @param[in]     p_sys_attr_data      Pointer to buffer where updated information about system
 *                                     attributes will be stored. Can be NULL to calculate required
 *                                     size.
 * @param[in]     p_sys_attr_data_len  Size of p_sys_attr_data buffer if \p p_sys_attr_data is
 *                                     not NULL.
 * @param[in]     flags                Additional optional flags.
 * @param[in,out] p_buf                Pointer to buffer where encoded data command will
 *                                     be returned.
 * @param[in,out] p_buf_len            \c in: size of \p p_buf buffer.
 *                                     \c out: Length of encoded command packet.
 *
 * @note  \p p_sys_attr_data and \p p_sys_attr_data_len will not be updated by the command
 *        request encoder. Updated values are set by @ref ble_gatts_sys_attr_get_rsp_dec.
 *
 * @retval NRF_SUCCESS               Encoding success.
 * @retval NRF_ERROR_NULL            Encoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH  Encoding failure. Incorrect buffer length.
 */
uint32_t ble_gatts_sys_attr_get_req_enc(uint16_t               conn_handle,
                                        uint8_t const * const  p_sys_attr_data,
                                        uint16_t const * const p_sys_attr_data_len,
                                        uint32_t               flags,
                                        uint8_t * const        p_buf,
                                        uint32_t *             p_buf_len);

/**@brief Decodes response to @ref sd_ble_gatts_sys_attr_get command.
 *
 * @sa @ref ble_gatts_sys_attr_get_req_enc for command request encoder.
 *
 * @param[in] p_buf                    Pointer to beginning of command response packet.
 * @param[in] packet_len               Length (in bytes) of response packet.
 * @param[out] pp_sys_attr_data        Pointer to a buffer where updated information about system
 *                                     attributes will be stored.
 * @param[in,out] pp_sys_attr_data_len \c in: Size (in bytes) of \p p_sys_attr_data buffer.
 *                                     \c out: Length of decoded contents of \p p_sys_attr_data.
 * @param[out] p_result_code           Command result code.
 *
 * @retval NRF_SUCCESS               Decoding success.
 * @retval NRF_ERROR_NULL            Decoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH  Decoding failure. Incorrect buffer length.
 * @retval NRF_ERROR_DATA_SIZE       Length of \p p_sys_attr_data is too small to hold decoded
 *                                   value from response.
 * @retval NRF_ERROR_INVALID_DATA    Decoding failure. Decoded operation code does not match
 *                                   expected operation code.
 */
uint32_t ble_gatts_sys_attr_get_rsp_dec(uint8_t const * const p_buf,
                                        uint32_t              packet_len,
                                        uint8_t * * const     pp_sys_attr_data,
                                        uint16_t * * const    pp_sys_attr_data_len,
                                        uint32_t * const      p_result_code);

/**@brief Encodes @ref sd_ble_gatts_descriptor_add command request.
 *
 * @sa @ref ble_gatts_descriptor_add_rsp_dec for command response decoder.
 *
 * @param[in] char_handle        Handle of the characteristic where the description is to be placed.
 *                               If @ref BLE_GATT_HANDLE_INVALID is used, it will be placed
 *                               sequentially.
 * @param[in] p_attr             Pointer to a @ref ble_gatts_attr_t structure, characteristic
 *                               metadata.
 * @param[in] p_handle           Pointer to a @ref ble_gatts_char_handles_t structure, where the
 *                               assigned handles will be stored.
 * @param[in] p_buf              Pointer to buffer where encoded data command will be returned.
 * @param[in,out] p_buf_len      \c in: Size of \p p_buf buffer.
 *                               \c out: Length of encoded command packet.
 *
 * @retval NRF_SUCCESS                Encoding success.
 * @retval NRF_ERROR_NULL             Encoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH   Encoding failure. Incorrect buffer length.
 */
uint32_t ble_gatts_descriptor_add_req_enc(uint16_t                       char_handle,
                                          ble_gatts_attr_t const * const p_attr,
                                          uint16_t * const               p_handle,
                                          uint8_t * const                p_buf,
                                          uint32_t * const               p_buf_len);

/**@brief Decodes response to @ref sd_ble_gatts_descriptor_add command.
 *
 * @sa @ref ble_gatts_descriptor_add_req_enc for command request encoder.
 *
 * @param[in]  p_buf              Pointer to beginning of command response packet.
 * @param[in]  packet_len         Length (in bytes) of response packet.
 * @param[out] p_handle           Pointer to bufer where descriptor handle will be
                                  returned.
 * @param[out] p_result_code      Pointer to command result code decode location.
 *
 * @retval NRF_SUCCESS               Decoding success.
 * @retval NRF_ERROR_NULL            Decoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH  Decoding failure. Incorrect buffer length.
 * @retval NRF_ERROR_INVALID_DATA    Decoding failure. Decoded operation code does not match
 *                                   expected operation code.
 */
uint32_t ble_gatts_descriptor_add_rsp_dec(uint8_t const * const p_buf,
                                          uint32_t              packet_len,
                                          uint16_t * const      p_handle,
                                          uint32_t * const      p_result_code);

/**@brief Encodes @ref sd_ble_gatts_include_add command request.
 *
 * @sa @ref ble_gatts_include_add_rsp_dec for command response decoder.
 *
 * @param[in] service_handle     Handle of the service where the included service is to be placed.
 * @param[in] inc_srvc_handle    Handle of the included service
 * @param[in] p_include_handle   Pointer to Pointer to a 16-bit word where the assigned handle will be stored.
 * @param[in] p_buf              Pointer to buffer where encoded data command will be returned.
 * @param[in,out] p_buf_len      \c in: Size of \p p_buf buffer.
 *                               \c out: Length of encoded command packet.
 *
 * @retval NRF_SUCCESS                Encoding success.
 * @retval NRF_ERROR_NULL             Encoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH   Encoding failure. Incorrect buffer length.
 */
uint32_t ble_gatts_include_add_req_enc(uint16_t         service_handle,
                                       uint16_t         inc_srvc_handle,
                                       uint16_t * const p_include_handle,
                                       uint8_t * const  p_buf,
                                       uint32_t * const p_buf_len);

/**@brief Decodes response to @ref sd_ble_gatts_include_add command.
 *
 * @sa @ref ble_gatts_include_add_req_enc for command request encoder.
 *
 * @param[in]  p_buf              Pointer to beginning of command response packet.
 * @param[in]  packet_len         Length (in bytes) of response packet.
 * @param[out] p_include_handle   Pointer to a 16-bit word where the assigned handle will be stored.
 * @param[out] p_result_code      Pointer to command result code decode location.
 *
 * @retval NRF_SUCCESS               Decoding success.
 * @retval NRF_ERROR_NULL            Decoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH  Decoding failure. Incorrect buffer length.
 * @retval NRF_ERROR_INVALID_DATA    Decoding failure. Decoded operation code does not match
 *                                   expected operation code.
 */
uint32_t ble_gatts_include_add_rsp_dec(uint8_t const * const p_buf,
                                       uint32_t              packet_len,
                                       uint16_t * const      p_include_handle,
                                       uint32_t * const      p_result_code);


/**@brief Encodes @ref sd_ble_gatts_rw_authorize_reply command request.
 *
 * @sa @ref ble_gatts_rw_authorize_reply_rsp_dec for command response decoder.
 *
 * @param[in] conn_handle    Connection handle.
 * @param[in] p_reply_params Pointer to \ref ble_gatts_rw_authorize_reply_params_t
 * @param[in] p_buf          Pointer to buffer where encoded data command will be returned.
 * @param[in,out] p_buf_len  \c in: Size of \p p_buf buffer.
 *                           \c out: Length of encoded command packet.
 *
 * @retval NRF_SUCCESS                Encoding success.
 * @retval NRF_ERROR_NULL             Encoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH   Encoding failure. Incorrect buffer length.
 * @retval NRF_ERROR_INVALID_PARAM    Encoding failure. Invalid param provided in p_reply_params.
 */
uint32_t ble_gatts_rw_authorize_reply_req_enc(
    uint16_t conn_handle,
    ble_gatts_rw_authorize_reply_params_t const * const
    p_reply_params,
    uint8_t * const
    p_buf,
    uint32_t * const
    p_buf_len);

/**@brief Decodes response to @ref sd_ble_gatts_rw_authorize_reply command.
 *
 * @sa @ref ble_gatts_rw_authorize_reply_req_enc for command request encoder.
 *
 * @param[in]  p_buf          Pointer to beginning of command response packet.
 * @param[in]  packet_len     Length (in bytes) of response packet.
 * @param[out] p_result_code  Command result code.
 *
 * @retval NRF_SUCCESS               Decoding success.
 * @retval NRF_ERROR_NULL            Decoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH  Decoding failure. Incorrect buffer length.
 * @retval NRF_ERROR_INVALID_DATA    Decoding failure. Decoded operation code does not match
 *                                   expected operation code.
 */
uint32_t ble_gatts_rw_authorize_reply_rsp_dec(uint8_t const * const p_buf,
                                              uint32_t              packet_len,
                                              uint32_t * const      p_result_code);

/**@brief Encodes @ref sd_ble_gatts_service_changed command request.
 *
 * @sa @ref ble_gatts_service_changed_rsp_dec for command response decoder.
 *
 * @param[in] conn_handle    Connection handle.
 * @param[in] start_handle   Start of affected attribute handle range.
 * @param[in] end_handle     End of affected attribute handle range.
 * @param[in] p_buf          Pointer to buffer where encoded data command will be returned.
 * @param[in,out] p_buf_len  \c in: Size of \p p_buf buffer.
 *                           \c out: Length of encoded command packet.
 *
 * @retval NRF_SUCCESS                Encoding success.
 * @retval NRF_ERROR_NULL             Encoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH   Encoding failure. Incorrect buffer length.
 * @retval NRF_ERROR_INVALID_PARAM    Encoding failure. Invalid param provided in p_reply_params.
 */
uint32_t ble_gatts_service_changed_req_enc(uint16_t         conn_handle,
                                           uint16_t         start_handle,
                                           uint16_t         end_handle,
                                           uint8_t * const  p_buf,
                                           uint32_t * const p_buf_len);

/**@brief Decodes response to @ref sd_ble_gatts_service_changed command.
 *
 * @sa @ref ble_gatts_service_changed_req_enc for command request encoder.
 *
 * @param[in]  p_buf          Pointer to beginning of command response packet.
 * @param[in]  packet_len     Length (in bytes) of response packet.
 * @param[out] p_result_code  Command result code.
 *
 * @retval NRF_SUCCESS               Decoding success.
 * @retval NRF_ERROR_NULL            Decoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH  Decoding failure. Incorrect buffer length.
 * @retval NRF_ERROR_INVALID_DATA    Decoding failure. Decoded operation code does not match
 *                                   expected operation code.
 */
uint32_t ble_gatts_service_changed_rsp_dec(uint8_t const * const p_buf,
                                           uint32_t              packet_len,
                                           uint32_t * const      p_result_code);

/**@brief Encodes @ref sd_ble_gatts_attr_get command request.
 *
 * @sa  @ref ble_gatts_attr_get_rsp_dec for command response decoder.
 *
 * @param[in]     handle      See @ref sd_ble_gatts_attr_get.
 * @param[in]     p_uuid      See @ref sd_ble_gatts_attr_get.
 * @param[out]    p_md        See @ref sd_ble_gatts_attr_get.
 * @param[in,out] p_buf       Pointer to buffer where encoded data command will be returned.
 * @param[in,out] p_buf_len   \c in: size of \p p_buf buffer.
 *                            \c out: Length of encoded command packet.
 *
 * @retval NRF_SUCCESS               Encoding success.
 * @retval NRF_ERROR_NULL            Encoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH  Encoding failure. Incorrect buffer length.
 */
uint32_t ble_gatts_attr_get_req_enc(uint16_t              handle,
                                    ble_uuid_t          * p_uuid,
                                    ble_gatts_attr_md_t * p_md,
                                    uint8_t * const       p_buf,
                                    uint32_t *            p_buf_len);

/**@brief Decodes response to @ref sd_ble_gatts_attr_get command.
 *
 * @sa @ref ble_gatts_attr_get_req_enc for command request encoder.
 *
 * @param[in] p_buf                  Pointer to beginning of command response packet.
 * @param[in] packet_len             Length (in bytes) of response packet.
 * @param[out] pp_uuid               Pointer to address where to put output data.
 * @param[out] pp_md                 Pointer to address where to put output data.
 * @param[out] p_result_code         Command result code.
 *
 * @retval NRF_SUCCESS               Decoding success.
 * @retval NRF_ERROR_NULL            Decoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH  Decoding failure. Incorrect buffer length.
 * @retval NRF_ERROR_INVALID_DATA    Decoding failure. Decoded operation code does not match
 *                                   expected operation code.
 */
uint32_t ble_gatts_attr_get_rsp_dec(uint8_t const * const  p_buf,
                                    uint32_t               packet_len,
                                    ble_uuid_t          ** pp_uuid,
                                    ble_gatts_attr_md_t ** pp_md,
                                    uint32_t * const       p_result_code);

/**@brief Encodes @ref sd_ble_gatts_initial_user_handle_get command request.
 *
 * @sa  @ref ble_gatts_initial_user_handle_get_rsp_dec for command response decoder.
 *
 * @param[out]    p_handle    See @ref sd_ble_gatts_initial_user_handle_get.
 * @param[in,out] p_buf       Pointer to buffer where encoded data command will be returned.
 * @param[in,out] p_buf_len   \c in: size of \p p_buf buffer.
 *                            \c out: Length of encoded command packet.
 *
 * @retval NRF_SUCCESS               Encoding success.
 * @retval NRF_ERROR_NULL            Encoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH  Encoding failure. Incorrect buffer length.
 */
uint32_t ble_gatts_initial_user_handle_get_req_enc(uint16_t      * p_handle,
                                                   uint8_t * const p_buf,
                                                   uint32_t *      p_buf_len);

/**@brief Decodes response to @ref sd_ble_gatts_initial_user_handle_get command.
 *
 * @sa @ref ble_gatts_initial_user_handle_get_req_enc for command request encoder.
 *
 * @param[in] p_buf                  Pointer to beginning of command response packet.
 * @param[in] packet_len             Length (in bytes) of response packet.
 * @param[out] pp_handle             Pointer to address where to put output data.
 * @param[out] p_result_code         Command result code.
 *
 * @retval NRF_SUCCESS               Decoding success.
 * @retval NRF_ERROR_NULL            Decoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH  Decoding failure. Incorrect buffer length.
 * @retval NRF_ERROR_INVALID_DATA    Decoding failure. Decoded operation code does not match
 *                                   expected operation code.
 */
uint32_t ble_gatts_initial_user_handle_get_rsp_dec(uint8_t const * const  p_buf,
                                                   uint32_t               packet_len,
                                                   uint16_t ** pp_handle,
                                                   uint32_t * const       p_result_code);

/**@brief Encodes @ref sd_ble_gatts_exchange_mtu_reply command request.
 *
 * @sa  @ref ble_gatts_exchange_mtu_reply_rsp_dec for command response decoder.
 *
 * @param[in] conn_handle    Connection handle.
 * @param[in] server_rx_mtu  Server MTU Size.
 * @param[in] p_buf          Pointer to buffer where encoded data command will be returned.
 * @param[in,out] p_buf_len  \c in: Size of \p p_buf buffer.
 *                           \c out: Length of encoded command packet.
 *
 * @retval NRF_SUCCESS                Encoding success.
 * @retval NRF_ERROR_NULL             Encoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH   Encoding failure. Incorrect buffer length.
 * @retval NRF_ERROR_INVALID_PARAM    Encoding failure. Invalid param provided in p_reply_params.
 */
uint32_t ble_gatts_exchange_mtu_reply_req_enc(uint16_t          conn_handle,
                                              uint16_t          server_rx_mtu,
                                              uint8_t * const   p_buf,
                                              uint32_t * const  p_buf_len);

/**@brief Decodes response to @ref sd_ble_gatts_exchange_mtu_reply command.
 *
 * @sa @ref ble_gatts_exchange_mtu_reply_req_enc for command request encoder.
 *
 * @param[in] p_buf                  Pointer to beginning of command response packet.
 * @param[in] packet_len             Length (in bytes) of response packet.
 * @param[out] p_result_code         Command result code.
 *
 * @retval NRF_SUCCESS               Decoding success.
 * @retval NRF_ERROR_NULL            Decoding failure. NULL pointer supplied.
 * @retval NRF_ERROR_INVALID_LENGTH  Decoding failure. Incorrect buffer length.
 * @retval NRF_ERROR_INVALID_DATA    Decoding failure. Decoded operation code does not match
 *                                   expected operation code.
 */
uint32_t ble_gatts_exchange_mtu_reply_rsp_dec(uint8_t const * const p_buf,
                                              uint32_t              packet_len,
                                              uint32_t * const      p_result_code);

/** @} */

#ifdef __cplusplus
}
#endif

#endif //BLE_GATTS_APP_H__