/**
* Copyright (c) 2013 - 2020, Nordic Semiconductor ASA
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form, except as embedded into a Nordic
* Semiconductor ASA integrated circuit in a product or a software update for
* such product, must reproduce the above copyright notice, this list of
* conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* 4. This software, with or without modification, must only be used with a
* Nordic Semiconductor ASA integrated circuit.
*
* 5. Any software provided in binary form under this license must not be reverse
* engineered, decompiled, modified and/or disassembled.
*
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#ifndef BLE_GAP_APP_H__
#define BLE_GAP_APP_H__
/**@file
*
* @defgroup ble_gap_app GAP Application command request encoders and command response decoders
* @{
* @ingroup ser_app_s130_codecs
*
* @brief GAP Application command request encoders and command response decoders.
*/
#include "ble.h"
#include "ble_gap.h"
#ifdef __cplusplus
extern "C" {
#endif
#if defined(NRF_SD_BLE_API_VERSION) && (NRF_SD_BLE_API_VERSION <= 5)
/**
* @brief Encodes @ref sd_ble_gap_adv_data_set command request.
*
* @sa @ref ble_gap_adv_data_set_rsp_dec for command response decoder.
*
* @param[in] p_data Raw data to be placed in advertisement packet. If NULL, no changes
* are made to the current advertisement packet data.
* @param[in] dlen Data length for p_data. Max size: @ref BLE_GAP_ADV_SR_MAX_LEN_DEFAULT octets.
* Should be 0 if p_data is NULL, can be 0 if p_data is not NULL.
* @param[in] p_sr_data Raw data to be placed in scan response packet. If NULL,
* no changes are made to the current scan response packet data.
* @param[in] srdlen Data length for p_sr_data. Max size: @ref BLE_GAP_ADV_SR_MAX_LEN_DEFAULT octets.
* Should be 0 if p_sr_data is NULL, can be 0 if p_data is not NULL.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in,out] p_buf_len \c in: Size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_adv_data_set_req_enc(uint8_t const * const p_data,
uint8_t dlen,
uint8_t const * const p_sr_data,
uint8_t srdlen,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**
* @brief Decodes response to @ref sd_ble_gap_adv_data_set command.
*
* @sa @ref ble_gap_adv_data_set_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match
* expected operation code.
*/
uint32_t ble_gap_adv_data_set_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
#endif
/**
* @brief Encodes @ref sd_ble_gap_adv_start command request.
*
* @sa @ref ble_gap_adv_start_rsp_dec for command response decoder.
*
* @param[in] p_adv_params Pointer to advertising parameters structure.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in,out] p_buf_len \c in: Size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_adv_start_req_enc(
#if NRF_SD_BLE_API_VERSION > 5
uint8_t adv_handle,
#else
ble_gap_adv_params_t const * const p_adv_params,
#endif
#if NRF_SD_BLE_API_VERSION >= 4
uint8_t conn_cfg_tag,
#endif
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**
* @brief Decodes response to @ref sd_ble_gap_adv_start command.
*
* @sa @ref ble_gap_adv_start_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match
* expected operation code.
*/
uint32_t ble_gap_adv_start_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**
* @brief Encodes @ref sd_ble_gap_tx_power_set command request.
*
* @sa @ref ble_gap_tx_power_set_rsp_dec for command response decoder.
*
* @param[in] tx_power Radio transmit power in dBm (accepted values are -40, -30, -20, -16, -12, -8, -4, 0, and 4 dBm).
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in,out] p_buf_len \c in: Size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_tx_power_set_req_enc(
#if NRF_SD_BLE_API_VERSION > 5
uint8_t role, uint16_t handle,
#endif
int8_t tx_power,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**
* @brief Decodes response to @ref sd_ble_gap_tx_power_set command.
*
* @sa @ref ble_gap_tx_power_set_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match
* expected operation code.
*/
uint32_t ble_gap_tx_power_set_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**
* @brief Encodes @ref sd_ble_gap_appearance_get command request.
*
* @sa @ref ble_gap_appearance_get_rsp_dec for command response decoder.
*
* @param[in] p_appearance Appearance (16 bit), see @ref BLE_APPEARANCES.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in,out] p_buf_len \c in: Size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @note \p p_appearance will not be updated by the command
* request encoder. Updated values are set by @ref ble_gap_appearance_get_rsp_dec.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_appearance_get_req_enc(uint16_t const * const p_appearance,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**
* @brief Decodes response to @ref sd_ble_gap_appearance_get command.
*
* @sa @ref ble_gap_appearance_get_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_appearance Appearance (16 bit), see @ref BLE_APPEARANCES.
* @param[out] p_result_code Command result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match
* expected operation code.
*/
uint32_t ble_gap_appearance_get_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint16_t * const p_appearance,
uint32_t * const p_result_code);
/**
* @brief Encodes @ref sd_ble_gap_appearance_set command request.
*
* @sa @ref ble_gap_appearance_set_rsp_dec for command response decoder.
*
* @param[in] appearance Appearance (16 bit), see @ref BLE_APPEARANCES.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in,out] p_buf_len \c in: Size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_appearance_set_req_enc(uint16_t appearance,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**
* @brief Decodes response to @ref sd_ble_gap_appearance_set command.
*
* @sa @ref ble_gap_appearance_set_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match
* expected operation code.
*/
uint32_t ble_gap_appearance_set_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**
* @brief Encodes @ref sd_ble_gap_device_name_get command request.
*
* @sa @ref ble_gap_device_name_get_rsp_dec for command response decoder.
*
* @param[in] p_dev_name Pointer to an empty buffer where the UTF-8 non NULL-terminated
* string will be placed. Set to NULL to obtain the complete device
* name length.
* @param[in] p_dev_name_len Length of the buffer pointed by p_dev_name.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in,out] p_buf_len \c in: Size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @note \p p_dev_name and \p p_len will not be updated by the command
* request encoder. Updated values are set by @ref ble_gap_device_name_get_rsp_dec.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_device_name_get_req_enc(uint8_t const * const p_dev_name,
uint16_t const * const p_dev_name_len,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**
* @brief Decodes response to @ref sd_ble_gap_device_name_get command.
*
* @sa @ref ble_gap_device_name_get_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_dev_name Pointer to an empty buffer where the UTF-8
* non NULL-terminated string will be placed.
* @param[in,out] p_dev_name_len Length of the buffer pointed by p_dev_name, complete device name
* length on output.
* @param[out] p_result_code Command result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match
* expected operation code.
*/
uint32_t ble_gap_device_name_get_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint8_t * const p_dev_name,
uint16_t * const p_dev_name_len,
uint32_t * const p_result_code);
/**
* @brief Encodes @ref sd_ble_gap_device_name_set command request.
*
* @sa @ref ble_gap_device_name_set_rsp_dec for command response decoder.
*
* @param[in] p_write_perm Write permissions for the Device Name characteristic, see
* @ref ble_gap_conn_sec_mode_t.
* @param[in] p_dev_name Pointer to a UTF-8 encoded, non NULL-terminated string.
* @param[in] len Length of the UTF-8, non NULL-terminated string pointed
* to by p_dev_name in octets (must be smaller or equal
* than @ref BLE_GAP_DEVNAME_MAX_LEN).
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in,out] p_buf_len \c in: Size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_device_name_set_req_enc(ble_gap_conn_sec_mode_t const * const p_write_perm,
uint8_t const * const p_dev_name,
uint16_t len,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**
* @brief Decodes response to @ref sd_ble_gap_device_name_set command.
*
* @sa @ref ble_gap_device_name_set_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match
* expected operation code.
*/
uint32_t ble_gap_device_name_set_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**
* @brief Encodes @ref sd_ble_gap_ppcp_set command request.
*
* @sa @ref ble_gap_ppcp_set_rsp_dec for command response decoder.
*
* @param[in] p_conn_params Pointer to a @ref ble_gap_conn_params_t structure with the
* desired parameters.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in,out] p_buf_len \c in: Size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_ppcp_set_req_enc(ble_gap_conn_params_t const * const p_conn_params,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**
* @brief Decodes response to @ref sd_ble_gap_ppcp_set command.
*
* @sa @ref ble_gap_ppcp_set_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match
* expected operation code.
*/
uint32_t ble_gap_ppcp_set_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**@brief Encodes @ref sd_ble_gap_conn_param_update command request.
*
* @sa @ref ble_gap_conn_param_update_rsp_dec for command response decoder.
*
* @param[in] conn_handle Connection handle of the connection.
* @param[in] p_conn_params Pointer to desired connection parameters.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_conn_param_update_req_enc(uint16_t conn_handle,
ble_gap_conn_params_t const * const p_conn_params,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_conn_param_update command.
*
* @sa @ref ble_gap_conn_param_update_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_conn_param_update_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**@brief Encodes @ref sd_ble_gap_disconnect command request.
*
* @sa @ref ble_gap_disconnect_rsp_dec for command response decoder.
*
* @param[in] conn_handle Connection handle of the connection.
* @param[in] hci_status_code HCI status code, see @ref BLE_HCI_STATUS_CODES.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_disconnect_req_enc(uint16_t conn_handle,
uint8_t hci_status_code,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_disconnect command.
*
* @sa @ref ble_gap_disconnect_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_disconnect_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**@brief Encodes @ref sd_ble_gap_rssi_stop command request.
*
* @sa @ref ble_gap_rssi_stop_rsp_dec for command response decoder.
*
* @param[in] conn_handle Connection handle of the connection.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_rssi_stop_req_enc(uint16_t conn_handle,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_rssi_stop command.
*
* @sa @ref ble_gap_rssi_stop_rsp_dec for command response decoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_rssi_stop_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**@brief Encodes @ref sd_ble_gap_ppcp_get command request.
*
* @sa @ref ble_gap_ppcp_get_rsp_dec for command response decoder.
*
* @param[in] p_conn_params Pointer to a @ref ble_gap_conn_params_t structure where the
* parameters will be stored.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @note \p p_conn_params will not be updated by the command request encoder. Updated values are
* set by @ref ble_gap_ppcp_get_rsp_dec.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_ppcp_get_req_enc(ble_gap_conn_params_t const * const p_conn_params,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_ppcp_get command.
*
* @sa @ref ble_gap_ppcp_get_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_conn_params Pointer to a @ref ble_gap_conn_params_t structure where the parameters
* will be stored.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_ppcp_get_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
ble_gap_conn_params_t * const p_conn_params,
uint32_t * const p_result_code);
/**@brief Encodes @ref sd_ble_gap_auth_key_reply command request.
*
* @sa @ref ble_gap_auth_key_reply_rsp_dec for command response decoder.
*
* @param[in] conn_handle Connection handle of the connection.
* @param[in] key_type Key type which defines length of key data as defined for
* @ref sd_ble_gap_auth_key_reply .
* @param[in] p_key Pointer to a buffer which contains key
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_PARAM Encoding failure. Incorrect param provided (key_type).
*/
uint32_t ble_gap_auth_key_reply_req_enc(uint16_t conn_handle,
uint8_t key_type,
uint8_t const * const p_key,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_auth_key_reply command.
*
* @sa @ref ble_gap_auth_key_reply_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_auth_key_reply_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**@brief Encodes @ref sd_ble_gap_sec_info_reply command request.
*
* @sa @ref ble_gap_sec_info_reply_rsp_dec for command response decoder.
*
* @param[in] conn_handle Connection handle of the connection.
* @param[in] p_enc_info Pointer to a @ref ble_gap_enc_info_t encryption information
* structure.
* @param[in] p_id_info Pointer to a @ref ble_gap_irk_t id information
* structure.
* @param[in] p_sign_info Pointer to a @ref ble_gap_sign_info_t signing information
* structure.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_sec_info_reply_req_enc(uint16_t conn_handle,
ble_gap_enc_info_t const * p_enc_info,
ble_gap_irk_t const * p_id_info,
ble_gap_sign_info_t const * p_sign_info,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_sec_info_reply command.
*
* @sa @ref ble_gap_sec_info_reply_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_sec_info_reply_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**@brief Encodes @ref sd_ble_gap_sec_params_reply command request.
*
* @sa @ref ble_gap_sec_params_reply_rsp_dec for command response decoder.
*
* @param[in] conn_handle Connection handle of the connection.
* @param[in] sec_status Security status, see @ref BLE_GAP_SEC_STATUS.
* @param[in] p_sec_params Pointer to @ref ble_gap_sec_params_t security parameters
* structure.
* @param[in] p_sec_keyset Pointer to @ref ble_gap_sec_keyset_t security keys
* structure.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_sec_params_reply_req_enc(uint16_t conn_handle,
uint8_t sec_status,
ble_gap_sec_params_t const * const p_sec_params,
ble_gap_sec_keyset_t const * const p_sec_keyset,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_sec_params_reply command.
*
* @sa @ref ble_gap_sec_params_reply_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[in] p_sec_keyset Pointer to @ref ble_gap_sec_keyset_t security keys
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_sec_params_reply_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
ble_gap_sec_keyset_t const * const p_sec_keyset,
uint32_t * const p_result_code);
/**@brief Encodes @ref sd_ble_gap_authenticate command request.
*
* @sa @ref ble_gap_authenticate_rsp_dec for command response decoder.
*
* @param[in] conn_handle Connection handle of the connection.
* @param[in] p_sec_params Pointer to a @ref ble_gap_sec_params_t security parameters
* structure.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_authenticate_req_enc(uint16_t conn_handle,
ble_gap_sec_params_t const * const p_sec_params,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_authenticate command.
*
* @sa @ref ble_gap_authenticate_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_authenticate_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**@brief Encodes @ref sd_ble_gap_adv_stop command request.
*
* @sa @ref ble_gap_adv_stop_rsp_dec for command response decoder.
*
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_adv_stop_req_enc(
#if NRF_SD_BLE_API_VERSION > 5
uint8_t adv_handle,
#endif
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_adv_stop command.
*
* @sa @ref ble_gap_adv_stop_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_adv_stop_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**@brief Encodes @ref sd_ble_gap_conn_sec_get command request.
*
* @sa @ref ble_gap_conn_sec_get_rsp_dec for command response decoder.
*
* @param[in] conn_handle Connection handle of the connection.
* @param[in] p_conn_sec Pointer to \ref ble_gap_conn_sec_t which will be filled in
* response.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_conn_sec_get_req_enc(uint16_t conn_handle,
ble_gap_conn_sec_t const * const p_conn_sec,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_conn_sec_get command.
*
* @sa @ref ble_gap_conn_sec_get_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] pp_conn_sec Pointer to pointer to \ref ble_gap_conn_sec_t which will be filled by
* the decoded data (if present).
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_conn_sec_get_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
ble_gap_conn_sec_t * * const pp_conn_sec,
uint32_t * const p_result_code);
/**@brief Encodes @ref sd_ble_gap_rssi_start command request.
*
* @sa @ref ble_gap_rssi_start_rsp_dec for command response decoder.
*
* @param[in] conn_handle Connection handle of the connection.
* @param[in] threshold_dbm Threshold in dBm.
* @param[in] skip_count Sample skip count.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_rssi_start_req_enc(uint16_t conn_handle,
uint8_t threshold_dbm,
uint8_t skip_count,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_rssi_start command.
*
* @sa @ref ble_gap_rssi_start_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_rssi_start_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
#ifndef S112
/**@brief Encodes @ref sd_ble_gap_scan_stop command request.
*
* @sa @ref ble_gap_scan_stop_rsp_dec for command response decoder.
*
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_scan_stop_req_enc(uint8_t * const p_buf, uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_scan_stop command.
*
* @sa @ref ble_gap_scan_stop_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_scan_stop_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**@brief Encodes @ref sd_ble_gap_scan_start command request.
*
* @sa @ref ble_gap_scan_start_rsp_dec for command response decoder.
*
* @param[in] p_scan_params Pointer to scan params structure.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_scan_start_req_enc(ble_gap_scan_params_t const * p_scan_params,
#if defined(NRF_SD_BLE_API_VERSION) && NRF_SD_BLE_API_VERSION > 5
ble_data_t const * p_adv_report_buffer,
#endif
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_scan_start command.
*
* @sa @ref ble_gap_scan_start_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_scan_start_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**@brief Encodes @ref sd_ble_gap_connect command request.
*
* @sa @ref ble_gap_connect_rsp_dec for command response decoder.
*
* @param[in] p_peer_addr Pointer to peer address.
* @param[in] p_scan_params Pointer to scan params structure.
* @param[in] p_conn_params Pointer to desired connection parameters.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_connect_req_enc(ble_gap_addr_t const * const p_peer_addr,
ble_gap_scan_params_t const * const p_scan_params,
ble_gap_conn_params_t const * const p_conn_params,
#if NRF_SD_BLE_API_VERSION >= 4
uint8_t conn_cfg_tag,
#endif
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_connect command.
*
* @sa @ref ble_gap_connect_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_connect_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**@brief Encodes @ref sd_ble_gap_connect_cancel command request.
*
* @sa @ref ble_gap_connect_cancel_rsp_dec for command response decoder.
*
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_connect_cancel_req_enc(uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_connect_cancel command.
*
* @sa @ref ble_gap_connect_cancel_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_connect_cancel_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**@brief Encodes @ref sd_ble_gap_encrypt command request.
*
* @sa @ref ble_gap_encrypt_rsp_dec for command response decoder.
*
* @param[in] conn_handle Connection handle.
* @param[in] p_master_id Pointer to a master identification structure.
* @param[in] p_enc_info Pointer to desired connection parameters.
* @param[in] p_buf Pointer to a ble_gap_enc_info_t encryption information structure.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_encrypt_req_enc(uint16_t conn_handle,
ble_gap_master_id_t const * const p_master_id,
ble_gap_enc_info_t const * const p_enc_info,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_encrypt command.
*
* @sa @ref ble_gap_encrypt_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_encrypt_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
#endif //!S112
/**@brief Encodes @ref sd_ble_gap_rssi_get command request.
*
* @sa @ref ble_gap_rssi_get_rsp_dec for command response decoder.
*
* @param[in] conn_handle Connection handle.
* @param[in] p_rssi Pointer to the RSSI value.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_rssi_get_req_enc(uint16_t conn_handle,
int8_t const * const p_rssi,
#if NRF_SD_BLE_API_VERSION > 5
uint8_t const * const p_ch_index,
#endif
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_rssi_get command.
*
* @sa @ref ble_gap_rssi_get_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_rssi Pointer to RSSI value.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_rssi_get_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
int8_t * const p_rssi,
#if NRF_SD_BLE_API_VERSION > 5
uint8_t * const p_ch_index,
#endif
uint32_t * const p_result_code);
/**@brief Encodes @ref sd_ble_gap_keypress_notify command request.
*
* @sa @ref ble_gap_keypress_notify_rsp_dec for command response decoder.
*
* @param[in] conn_handle Connection handle.
* @param[in] kp_not See @ref sd_ble_gap_keypress_notify.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_keypress_notify_req_enc(uint16_t conn_handle,
uint8_t kp_not,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_keypress_notify command.
*
* @sa @ref ble_gap_keypress_notify_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_keypress_notify_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**@brief Encodes @ref sd_ble_gap_lesc_dhkey_reply command request.
*
* @sa @ref ble_gap_lesc_dhkey_reply_rsp_dec for command response decoder.
*
* @param[in] conn_handle Connection handle.
* @param[in] p_dhkey See @ref sd_ble_gap_lesc_dhkey_reply.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_lesc_dhkey_reply_req_enc(uint16_t conn_handle,
ble_gap_lesc_dhkey_t const *p_dhkey,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_lesc_dhkey_reply command.
*
* @sa @ref ble_gap_lesc_dhkey_reply_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_lesc_dhkey_reply_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**@brief Encodes @ref sd_ble_gap_lesc_oob_data_set command request.
*
* @sa @ref ble_gap_lesc_oob_data_set_rsp_dec for command response decoder.
*
* @param[in] conn_handle Connection handle.
* @param[in] p_oobd_own See @ref sd_ble_gap_lesc_oob_data_set.
* @param[in] p_oobd_peer See @ref sd_ble_gap_lesc_oob_data_set.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_lesc_oob_data_set_req_enc(uint16_t conn_handle,
ble_gap_lesc_oob_data_t const *p_oobd_own,
ble_gap_lesc_oob_data_t const *p_oobd_peer,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_lesc_oob_data_set command.
*
* @sa @ref ble_gap_lesc_oob_data_set_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_lesc_oob_data_set_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**@brief Encodes @ref sd_ble_gap_lesc_oob_data_get command request.
*
* @sa @ref ble_gap_lesc_oob_data_get_rsp_dec for command response decoder.
*
* @param[in] conn_handle Connection handle.
* @param[in] p_pk_own See @ref sd_ble_gap_lesc_oob_data_get.
* @param[in] p_oobd_own See @ref sd_ble_gap_lesc_oob_data_get.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_lesc_oob_data_get_req_enc(uint16_t conn_handle,
ble_gap_lesc_p256_pk_t const *p_pk_own,
ble_gap_lesc_oob_data_t *p_oobd_own,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_lesc_oob_data_get command.
*
* @sa @ref ble_gap_lesc_oob_data_get_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] pp_oobd_own Pointer to pointer to location where OOB data is decoded.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_lesc_oob_data_get_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
ble_gap_lesc_oob_data_t * *pp_oobd_own,
uint32_t * const p_result_code);
/**
* @brief Encodes @ref sd_ble_gap_addr_get command request.
*
* @sa @ref ble_gap_addr_get_rsp_dec for command response decoder.
*
* @param[in] p_address Pointer to address.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in,out] p_buf_len \c in: Size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @note \p p_address will not be updated by the command
* request encoder. Updated values are set by @ref ble_gap_addr_get_rsp_dec.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_addr_get_req_enc(ble_gap_addr_t const * const p_address,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**
* @brief Decodes response to @ref sd_ble_gap_addr_get command.
*
* @sa @ref ble_gap_addr_get_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_address Pointer to address.
* @param[out] p_result_code Command result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match
* expected operation code.
*/
uint32_t ble_gap_addr_get_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
ble_gap_addr_t * const p_address,
uint32_t * const p_result_code);
/**
* @brief Encodes @ref sd_ble_gap_addr_set command request.
*
* @sa @ref ble_gap_addr_set_rsp_dec for command response decoder.
*
* @param[in] p_addr Pointer to address structure.
* @param[in,out] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_addr_set_req_enc(ble_gap_addr_t const * const p_addr,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**
* @brief Decodes response to @ref sd_ble_gap_addr_set command.
*
* @sa @ref ble_gap_addr_set_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match
* expected operation code.
*/
uint32_t ble_gap_addr_set_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**
* @brief Encodes @ref sd_ble_gap_privacy_set command request.
*
* @sa @ref ble_gap_privacy_set_rsp_dec for command response decoder.
*
* @param[in] p_privacy_params Pointer to privacy settings structure.
* @param[in,out] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_privacy_set_req_enc(ble_gap_privacy_params_t const * p_privacy_params,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**
* @brief Decodes response to @ref sd_ble_gap_privacy_set command.
*
* @sa @ref ble_gap_privacy_set_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match
* expected operation code.
*/
uint32_t ble_gap_privacy_set_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**
* @brief Encodes @ref sd_ble_gap_privacy_get command request.
*
* @sa @ref ble_gap_privacy_get_rsp_dec for command response decoder.
*
* @param[in] p_privacy_params Pointer to privacy settings structure.
* @param[in,out] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_privacy_get_req_enc(ble_gap_privacy_params_t const * const p_privacy_params,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**
* @brief Decodes response to @ref sd_ble_gap_privacy_get command.
*
* @sa @ref ble_gap_privacy_get_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_privacy_params Pointer to privacy settings structure.
* @param[out] p_result_code Command result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match
* expected operation code.
*/
uint32_t ble_gap_privacy_get_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
ble_gap_privacy_params_t const * const p_privacy_params,
uint32_t * const p_result_code);
/**
* @brief Encodes @ref sd_ble_gap_whitelist_set command request.
*
* @sa @ref ble_gap_whitelist_set_rsp_dec for command response decoder.
*
* @param[in] pp_wl_addrs Pointer to a whitelist of peer addresses.
* @param[out] len Pointer to a length of the whitelist.
* @param[in,out] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_whitelist_set_req_enc(ble_gap_addr_t const * const * const pp_wl_addrs,
uint8_t const len,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**
* @brief Decodes response to @ref sd_ble_gap_whitelist_set command.
*
* @sa @ref ble_gap_whitelist_set_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match
* expected operation code.
*/
uint32_t ble_gap_whitelist_set_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**
* @brief Encodes @ref sd_ble_gap_device_identities_set command request.
*
* @sa @ref ble_gap_device_identities_set_rsp_dec for command response decoder.
*
* @param[in] pp_id_keys Pointer to an array of peer identity addresses and peer IRKs.
* @param[in] pp_local_irks Pointer to an array of local IRKs.
* @param[out] len Pointer to a length of the device identity list.
* @param[in,out] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_device_identities_set_req_enc(ble_gap_id_key_t const * const * const pp_id_keys,
ble_gap_irk_t const * const * const pp_local_irks,
uint8_t const len,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**
* @brief Decodes response to @ref sd_ble_gap_device_identities_set command.
*
* @sa @ref ble_gap_device_identities_set_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match
* expected operation code.
*/
uint32_t ble_gap_device_identities_set_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
#if NRF_SD_BLE_API_VERSION >= 4 && !defined(S112)
/**
* @brief Encodes @ref sd_ble_gap_data_length_update command request.
*
* @sa @ref ble_gap_data_length_update_rsp_dec for command response decoder.
*
* @param[in] conn_handle Connection handle.
* @param[in] p_dl_params Pointer to a data length params structure.
* @param[out] p_dl_limitation Pointer to a data length limitation structure.
* @param[in,out] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in,out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_data_length_update_req_enc(uint16_t conn_handle,
ble_gap_data_length_params_t const * p_dl_params,
ble_gap_data_length_limitation_t * p_dl_limitation,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**
* @brief Decodes response to @ref sd_ble_gap_data_length_update command.
*
* @sa @ref ble_gap_data_length_update_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_dl_limitation Pointer to a data length limitation structure.
* @param[out] p_result_code Command result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match
* expected operation code.
*/
uint32_t ble_gap_data_length_update_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
ble_gap_data_length_limitation_t * p_dl_limitation,
uint32_t * const p_result_code);
#endif
#if NRF_SD_BLE_API_VERSION >= 5
/**@brief Encodes @ref sd_ble_gap_phy_update command request.
*
* @sa @ref ble_gap_phy_update_rsp_dec for command response decoder.
*
* @param[in] conn_handle Connection handle of the connection.
* @param[in] p_gap_phys Pointer to a @ref ble_gap_phys_t
* structure.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_phy_update_req_enc(uint16_t conn_handle,
ble_gap_phys_t const * p_gap_phys,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_phy_update command.
*
* @sa @ref ble_gap_phy_update_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_phy_update_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
#endif
#if NRF_SD_BLE_API_VERSION >= 6
/**@brief Encodes @ref sd_ble_gap_adv_set_configure command request.
*
* @sa @ref ble_gap_adv_set_configure_rsp_dec for command response decoder.
*
* @param[in] p_adv_handle Advertising handle.
* @param[in] p_adv_data Pointer to a @ref ble_gap_adv_data_t structure.
* @param[in] p_adv_params Pointer to a @ref ble_gap_adv_params_t structure.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_adv_set_configure_req_enc(uint8_t * p_adv_handle,
ble_gap_adv_data_t const * p_adv_data,
ble_gap_adv_params_t const *p_adv_params,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_adv_set_configure command.
*
* @sa @ref ble_gap_adv_set_configure_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_adv_handle Advertising handle.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_adv_set_configure_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint8_t * p_adv_handle,
uint32_t * const p_result_code);
/**@brief Encodes @ref sd_ble_gap_qos_channel_survey_start command request.
*
* @sa @ref ble_gap_qos_channel_survey_start_rsp_dec for command response decoder.
*
* @param[in] interval_us Interval.
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_qos_channel_survey_start_req_enc(uint32_t interval_us,
uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_qos_channel_survey_start command.
*
* @sa @ref ble_gap_qos_channel_survey_start_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_qos_channel_survey_start_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
/**@brief Encodes @ref sd_ble_gap_qos_channel_survey_stop command request.
*
* @sa @ref ble_gap_qos_channel_survey_stop_rsp_dec for command response decoder.
*
* @param[in] p_buf Pointer to buffer where encoded data command will be returned.
* @param[in, out] p_buf_len \c in: size of \p p_buf buffer.
* \c out: Length of encoded command packet.
*
* @retval NRF_SUCCESS Encoding success.
* @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied.
* @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length.
*/
uint32_t ble_gap_qos_channel_survey_stop_req_enc(uint8_t * const p_buf,
uint32_t * const p_buf_len);
/**@brief Decodes response to @ref sd_ble_gap_qos_channel_survey_stop command.
*
* @sa @ref ble_gap_qos_channel_survey_stop_req_enc for command request encoder.
*
* @param[in] p_buf Pointer to beginning of command response packet.
* @param[in] packet_len Length (in bytes) of response packet.
* @param[out] p_result_code Command response result code.
*
* @retval NRF_SUCCESS Decoding success.
* @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied.
* @retval NRF_ERROR_DATA_SIZE Decoding failure. Incorrect buffer length.
* @retval NRF_ERROR_INVALID_DATA Decoding failure. Decoded operation code does not match expected
* operation code.
*/
uint32_t ble_gap_qos_channel_survey_stop_rsp_dec(uint8_t const * const p_buf,
uint32_t packet_len,
uint32_t * const p_result_code);
#endif
/** @} */
#ifdef __cplusplus
}
#endif
#endif