| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908190919101911191219131914191519161917191819191920192119221923192419251926192719281929193019311932193319341935193619371938193919401941194219431944194519461947194819491950195119521953195419551956195719581959196019611962196319641965196619671968196919701971197219731974197519761977197819791980198119821983198419851986198719881989199019911992199319941995199619971998199920002001200220032004200520062007200820092010201120122013201420152016201720182019202020212022202320242025202620272028202920302031203220332034203520362037203820392040204120422043204420452046204720482049205020512052205320542055205620572058205920602061206220632064206520662067206820692070207120722073207420752076207720782079208020812082208320842085208620872088208920902091209220932094209520962097209820992100210121022103210421052106210721082109211021112112211321142115211621172118211921202121212221232124212521262127212821292130213121322133213421352136213721382139214021412142214321442145214621472148214921502151215221532154215521562157215821592160216121622163216421652166216721682169217021712172217321742175217621772178217921802181218221832184218521862187218821892190219121922193219421952196219721982199220022012202220322042205220622072208220922102211221222132214221522162217221822192220222122222223222422252226222722282229223022312232223322342235223622372238223922402241224222432244224522462247224822492250225122522253225422552256225722582259226022612262226322642265226622672268226922702271227222732274227522762277227822792280228122822283228422852286228722882289229022912292229322942295229622972298229923002301230223032304230523062307230823092310231123122313231423152316231723182319232023212322232323242325232623272328232923302331233223332334233523362337233823392340234123422343234423452346234723482349235023512352235323542355235623572358235923602361236223632364236523662367236823692370237123722373237423752376237723782379238023812382238323842385238623872388238923902391239223932394239523962397239823992400240124022403240424052406240724082409241024112412241324142415241624172418241924202421242224232424242524262427242824292430243124322433243424352436243724382439244024412442244324442445244624472448244924502451245224532454245524562457245824592460246124622463246424652466246724682469247024712472247324742475247624772478247924802481248224832484248524862487248824892490249124922493249424952496249724982499250025012502250325042505250625072508250925102511251225132514251525162517251825192520252125222523252425252526252725282529253025312532253325342535253625372538253925402541254225432544254525462547254825492550255125522553255425552556255725582559256025612562256325642565256625672568256925702571257225732574257525762577257825792580258125822583258425852586258725882589259025912592259325942595259625972598259926002601260226032604260526062607260826092610261126122613261426152616261726182619262026212622262326242625262626272628262926302631263226332634263526362637263826392640264126422643264426452646264726482649265026512652265326542655265626572658265926602661266226632664266526662667266826692670267126722673267426752676267726782679268026812682268326842685268626872688268926902691269226932694269526962697269826992700270127022703270427052706270727082709271027112712271327142715271627172718271927202721272227232724272527262727272827292730273127322733273427352736273727382739274027412742274327442745274627472748274927502751275227532754275527562757275827592760276127622763276427652766276727682769277027712772277327742775277627772778277927802781278227832784278527862787278827892790279127922793279427952796279727982799280028012802280328042805280628072808280928102811281228132814281528162817281828192820282128222823282428252826282728282829283028312832283328342835283628372838283928402841284228432844284528462847284828492850285128522853285428552856285728582859286028612862286328642865286628672868286928702871287228732874287528762877287828792880288128822883288428852886288728882889289028912892289328942895289628972898289929002901290229032904290529062907290829092910291129122913291429152916291729182919292029212922292329242925292629272928292929302931293229332934293529362937293829392940294129422943294429452946294729482949295029512952295329542955295629572958295929602961296229632964296529662967296829692970297129722973297429752976297729782979298029812982298329842985298629872988298929902991299229932994299529962997299829993000300130023003300430053006300730083009301030113012301330143015301630173018301930203021302230233024302530263027302830293030303130323033303430353036303730383039304030413042304330443045304630473048304930503051305230533054305530563057305830593060306130623063306430653066306730683069307030713072307330743075307630773078307930803081308230833084308530863087308830893090309130923093309430953096309730983099310031013102310331043105310631073108310931103111311231133114311531163117311831193120312131223123312431253126312731283129313031313132313331343135313631373138313931403141314231433144314531463147314831493150315131523153315431553156315731583159316031613162316331643165316631673168316931703171317231733174317531763177317831793180318131823183318431853186318731883189319031913192319331943195319631973198319932003201320232033204320532063207320832093210321132123213321432153216321732183219322032213222322332243225322632273228322932303231323232333234323532363237323832393240324132423243324432453246324732483249325032513252325332543255325632573258325932603261326232633264326532663267326832693270327132723273327432753276327732783279328032813282328332843285328632873288328932903291329232933294329532963297329832993300330133023303330433053306330733083309331033113312331333143315331633173318331933203321332233233324332533263327332833293330333133323333333433353336333733383339334033413342334333443345334633473348334933503351335233533354335533563357335833593360336133623363336433653366336733683369337033713372337333743375337633773378337933803381338233833384338533863387338833893390339133923393339433953396339733983399340034013402340334043405340634073408340934103411341234133414341534163417341834193420342134223423342434253426342734283429343034313432343334343435343634373438343934403441344234433444344534463447344834493450345134523453345434553456345734583459346034613462346334643465346634673468346934703471347234733474347534763477347834793480348134823483348434853486348734883489349034913492349334943495349634973498349935003501350235033504350535063507350835093510351135123513351435153516351735183519352035213522352335243525352635273528352935303531353235333534353535363537353835393540354135423543354435453546354735483549355035513552355335543555355635573558355935603561356235633564356535663567356835693570357135723573357435753576357735783579358035813582358335843585358635873588358935903591359235933594359535963597359835993600360136023603360436053606360736083609361036113612361336143615361636173618361936203621362236233624362536263627362836293630363136323633363436353636363736383639364036413642364336443645364636473648364936503651365236533654365536563657365836593660366136623663366436653666366736683669367036713672367336743675367636773678367936803681368236833684368536863687368836893690369136923693369436953696369736983699370037013702370337043705370637073708370937103711371237133714371537163717371837193720372137223723372437253726372737283729373037313732373337343735373637373738373937403741374237433744374537463747374837493750375137523753375437553756375737583759376037613762376337643765376637673768376937703771377237733774377537763777377837793780378137823783378437853786378737883789379037913792379337943795379637973798379938003801380238033804380538063807380838093810381138123813381438153816381738183819382038213822382338243825382638273828382938303831383238333834383538363837383838393840384138423843384438453846384738483849385038513852385338543855385638573858385938603861386238633864386538663867386838693870387138723873387438753876387738783879388038813882388338843885388638873888388938903891389238933894389538963897389838993900390139023903390439053906390739083909391039113912391339143915391639173918391939203921392239233924392539263927392839293930393139323933393439353936393739383939394039413942394339443945394639473948394939503951395239533954395539563957395839593960396139623963396439653966396739683969397039713972397339743975397639773978397939803981398239833984398539863987398839893990399139923993399439953996399739983999400040014002400340044005400640074008400940104011401240134014401540164017401840194020402140224023402440254026402740284029403040314032403340344035403640374038403940404041404240434044404540464047404840494050405140524053405440554056405740584059406040614062406340644065406640674068406940704071407240734074407540764077407840794080408140824083408440854086408740884089409040914092409340944095409640974098409941004101410241034104410541064107410841094110411141124113411441154116411741184119412041214122412341244125412641274128412941304131413241334134413541364137413841394140414141424143414441454146414741484149415041514152415341544155415641574158415941604161416241634164416541664167416841694170417141724173417441754176417741784179418041814182418341844185418641874188418941904191419241934194419541964197419841994200420142024203420442054206420742084209421042114212421342144215421642174218421942204221422242234224422542264227422842294230423142324233423442354236423742384239424042414242424342444245424642474248424942504251425242534254425542564257425842594260426142624263426442654266426742684269427042714272427342744275427642774278427942804281428242834284428542864287428842894290429142924293429442954296429742984299430043014302430343044305430643074308430943104311431243134314431543164317431843194320432143224323432443254326432743284329433043314332433343344335433643374338433943404341434243434344434543464347434843494350435143524353435443554356435743584359436043614362436343644365436643674368436943704371437243734374437543764377437843794380438143824383438443854386438743884389439043914392439343944395439643974398439944004401440244034404440544064407440844094410441144124413441444154416441744184419442044214422442344244425442644274428442944304431443244334434443544364437443844394440444144424443444444454446444744484449445044514452445344544455445644574458445944604461446244634464446544664467446844694470447144724473447444754476447744784479448044814482448344844485448644874488448944904491449244934494449544964497449844994500450145024503450445054506450745084509451045114512451345144515451645174518451945204521452245234524452545264527452845294530453145324533453445354536453745384539454045414542454345444545454645474548454945504551455245534554455545564557455845594560456145624563456445654566456745684569457045714572457345744575457645774578457945804581458245834584458545864587458845894590459145924593459445954596459745984599460046014602460346044605460646074608460946104611461246134614461546164617461846194620462146224623462446254626462746284629463046314632463346344635463646374638463946404641464246434644464546464647464846494650465146524653465446554656465746584659466046614662466346644665466646674668466946704671467246734674467546764677467846794680468146824683468446854686468746884689469046914692469346944695469646974698469947004701470247034704470547064707470847094710471147124713471447154716471747184719472047214722472347244725472647274728472947304731473247334734473547364737473847394740474147424743474447454746474747484749475047514752475347544755475647574758475947604761476247634764476547664767476847694770477147724773477447754776477747784779478047814782478347844785478647874788478947904791479247934794479547964797479847994800480148024803480448054806480748084809481048114812481348144815481648174818481948204821482248234824482548264827482848294830483148324833483448354836483748384839484048414842484348444845484648474848484948504851485248534854485548564857485848594860486148624863486448654866486748684869487048714872487348744875487648774878487948804881488248834884488548864887488848894890489148924893489448954896489748984899490049014902490349044905490649074908490949104911491249134914491549164917491849194920492149224923492449254926492749284929493049314932493349344935493649374938493949404941494249434944494549464947494849494950495149524953495449554956495749584959496049614962496349644965496649674968496949704971497249734974497549764977497849794980498149824983498449854986498749884989499049914992499349944995499649974998499950005001500250035004500550065007500850095010501150125013501450155016501750185019502050215022502350245025502650275028502950305031503250335034503550365037503850395040504150425043504450455046504750485049505050515052505350545055505650575058505950605061506250635064506550665067506850695070507150725073507450755076507750785079508050815082508350845085508650875088508950905091509250935094509550965097509850995100510151025103510451055106510751085109511051115112511351145115511651175118511951205121512251235124512551265127512851295130513151325133513451355136513751385139514051415142514351445145514651475148514951505151515251535154515551565157515851595160516151625163516451655166516751685169517051715172517351745175517651775178517951805181518251835184518551865187518851895190519151925193519451955196519751985199520052015202520352045205520652075208520952105211521252135214521552165217521852195220522152225223522452255226522752285229523052315232523352345235523652375238523952405241524252435244524552465247524852495250525152525253525452555256525752585259526052615262526352645265526652675268526952705271527252735274527552765277527852795280528152825283528452855286528752885289529052915292529352945295529652975298529953005301530253035304530553065307530853095310531153125313531453155316531753185319532053215322532353245325532653275328532953305331533253335334533553365337533853395340534153425343534453455346534753485349535053515352535353545355535653575358535953605361536253635364536553665367536853695370537153725373537453755376537753785379538053815382538353845385538653875388538953905391539253935394539553965397539853995400540154025403540454055406540754085409541054115412541354145415541654175418541954205421542254235424542554265427542854295430543154325433543454355436543754385439544054415442544354445445544654475448544954505451545254535454545554565457545854595460546154625463546454655466546754685469547054715472547354745475547654775478547954805481548254835484548554865487548854895490549154925493549454955496549754985499550055015502550355045505550655075508550955105511551255135514551555165517551855195520552155225523552455255526552755285529553055315532553355345535553655375538553955405541554255435544554555465547554855495550555155525553555455555556555755585559556055615562556355645565556655675568556955705571557255735574557555765577557855795580558155825583558455855586558755885589559055915592559355945595559655975598559956005601560256035604560556065607560856095610561156125613561456155616561756185619562056215622562356245625562656275628562956305631563256335634563556365637563856395640564156425643564456455646564756485649565056515652565356545655565656575658565956605661566256635664566556665667566856695670567156725673567456755676567756785679568056815682568356845685568656875688568956905691569256935694569556965697569856995700570157025703570457055706570757085709571057115712571357145715571657175718571957205721572257235724572557265727572857295730573157325733573457355736573757385739574057415742574357445745574657475748574957505751575257535754575557565757575857595760576157625763576457655766576757685769577057715772577357745775577657775778577957805781578257835784578557865787578857895790579157925793579457955796579757985799580058015802580358045805580658075808580958105811581258135814581558165817581858195820582158225823582458255826582758285829583058315832583358345835583658375838583958405841584258435844584558465847584858495850585158525853585458555856585758585859586058615862586358645865586658675868586958705871587258735874587558765877587858795880588158825883588458855886588758885889589058915892589358945895589658975898589959005901590259035904590559065907590859095910591159125913591459155916591759185919592059215922592359245925592659275928592959305931593259335934593559365937593859395940594159425943594459455946594759485949595059515952595359545955595659575958595959605961596259635964596559665967596859695970597159725973597459755976597759785979598059815982598359845985598659875988598959905991599259935994599559965997599859996000600160026003600460056006600760086009601060116012601360146015601660176018601960206021602260236024602560266027602860296030603160326033603460356036603760386039604060416042604360446045604660476048604960506051605260536054605560566057605860596060606160626063606460656066606760686069607060716072607360746075607660776078607960806081608260836084608560866087608860896090609160926093609460956096609760986099610061016102610361046105610661076108610961106111611261136114611561166117611861196120612161226123612461256126612761286129613061316132613361346135613661376138613961406141614261436144614561466147614861496150615161526153615461556156615761586159616061616162616361646165616661676168616961706171617261736174617561766177617861796180618161826183618461856186618761886189619061916192619361946195619661976198619962006201620262036204620562066207620862096210621162126213621462156216621762186219622062216222622362246225622662276228622962306231623262336234623562366237623862396240624162426243624462456246624762486249625062516252625362546255625662576258625962606261626262636264626562666267626862696270627162726273627462756276627762786279628062816282628362846285628662876288628962906291629262936294629562966297629862996300630163026303630463056306630763086309631063116312631363146315631663176318631963206321632263236324632563266327632863296330633163326333633463356336633763386339634063416342634363446345634663476348634963506351635263536354635563566357635863596360636163626363636463656366636763686369637063716372637363746375637663776378637963806381638263836384638563866387638863896390639163926393639463956396639763986399640064016402640364046405640664076408640964106411641264136414641564166417641864196420642164226423642464256426642764286429643064316432643364346435643664376438643964406441644264436444644564466447644864496450645164526453645464556456645764586459646064616462646364646465646664676468646964706471647264736474647564766477647864796480648164826483648464856486648764886489649064916492649364946495649664976498649965006501650265036504650565066507650865096510651165126513651465156516651765186519652065216522652365246525652665276528652965306531653265336534653565366537653865396540654165426543654465456546654765486549655065516552655365546555655665576558655965606561656265636564656565666567656865696570657165726573657465756576657765786579658065816582658365846585658665876588658965906591659265936594659565966597659865996600660166026603660466056606660766086609661066116612661366146615661666176618661966206621662266236624662566266627662866296630663166326633663466356636663766386639664066416642664366446645664666476648664966506651665266536654665566566657665866596660666166626663666466656666666766686669667066716672667366746675667666776678667966806681668266836684668566866687668866896690669166926693669466956696669766986699670067016702670367046705670667076708670967106711671267136714671567166717671867196720672167226723672467256726672767286729673067316732673367346735673667376738673967406741674267436744674567466747674867496750675167526753675467556756675767586759676067616762676367646765676667676768676967706771677267736774677567766777677867796780678167826783678467856786678767886789679067916792679367946795679667976798679968006801680268036804680568066807680868096810681168126813681468156816681768186819682068216822682368246825682668276828682968306831683268336834683568366837683868396840684168426843684468456846684768486849685068516852685368546855685668576858685968606861686268636864686568666867686868696870687168726873687468756876687768786879688068816882688368846885688668876888688968906891689268936894689568966897689868996900690169026903690469056906690769086909691069116912691369146915691669176918691969206921692269236924692569266927692869296930693169326933693469356936693769386939694069416942694369446945694669476948694969506951695269536954695569566957695869596960696169626963696469656966696769686969697069716972697369746975697669776978697969806981698269836984698569866987698869896990699169926993699469956996699769986999700070017002700370047005700670077008700970107011701270137014701570167017701870197020702170227023702470257026702770287029703070317032703370347035703670377038703970407041704270437044704570467047704870497050705170527053705470557056705770587059706070617062706370647065706670677068706970707071707270737074707570767077707870797080708170827083708470857086708770887089709070917092709370947095709670977098709971007101710271037104710571067107710871097110711171127113711471157116711771187119712071217122712371247125712671277128712971307131713271337134713571367137713871397140714171427143714471457146714771487149715071517152715371547155715671577158715971607161716271637164716571667167716871697170717171727173717471757176717771787179718071817182718371847185718671877188718971907191719271937194719571967197719871997200720172027203720472057206720772087209721072117212721372147215721672177218721972207221722272237224722572267227722872297230723172327233723472357236723772387239724072417242724372447245724672477248724972507251725272537254725572567257725872597260726172627263726472657266726772687269727072717272727372747275727672777278727972807281728272837284728572867287728872897290729172927293729472957296729772987299730073017302730373047305730673077308730973107311731273137314731573167317731873197320732173227323732473257326732773287329733073317332733373347335733673377338733973407341734273437344734573467347734873497350735173527353735473557356735773587359736073617362736373647365736673677368736973707371737273737374737573767377737873797380738173827383738473857386738773887389739073917392739373947395739673977398739974007401740274037404740574067407740874097410741174127413741474157416741774187419742074217422742374247425742674277428742974307431743274337434743574367437743874397440744174427443744474457446744774487449745074517452745374547455745674577458745974607461746274637464746574667467746874697470747174727473747474757476747774787479748074817482748374847485748674877488748974907491749274937494749574967497749874997500750175027503750475057506750775087509751075117512751375147515751675177518751975207521752275237524752575267527752875297530753175327533753475357536753775387539754075417542754375447545754675477548754975507551755275537554755575567557755875597560756175627563756475657566756775687569757075717572757375747575757675777578757975807581758275837584758575867587758875897590759175927593759475957596759775987599760076017602760376047605760676077608760976107611761276137614761576167617761876197620762176227623762476257626762776287629763076317632763376347635763676377638763976407641764276437644764576467647764876497650765176527653765476557656765776587659766076617662766376647665766676677668766976707671767276737674767576767677767876797680768176827683768476857686768776887689769076917692769376947695769676977698769977007701770277037704770577067707770877097710771177127713771477157716771777187719772077217722772377247725772677277728772977307731773277337734773577367737773877397740774177427743774477457746774777487749775077517752775377547755775677577758775977607761776277637764776577667767776877697770777177727773777477757776777777787779778077817782778377847785778677877788778977907791779277937794779577967797779877997800780178027803780478057806780778087809781078117812781378147815781678177818781978207821782278237824782578267827782878297830783178327833783478357836783778387839784078417842784378447845784678477848784978507851785278537854785578567857785878597860786178627863786478657866786778687869787078717872787378747875787678777878787978807881788278837884788578867887788878897890789178927893789478957896789778987899790079017902790379047905790679077908790979107911791279137914791579167917791879197920792179227923792479257926792779287929793079317932793379347935793679377938793979407941794279437944794579467947794879497950795179527953795479557956795779587959796079617962796379647965796679677968796979707971797279737974797579767977797879797980798179827983798479857986798779887989799079917992799379947995799679977998799980008001800280038004800580068007800880098010801180128013801480158016801780188019802080218022802380248025802680278028802980308031803280338034803580368037803880398040804180428043804480458046804780488049805080518052805380548055805680578058805980608061806280638064806580668067806880698070807180728073807480758076807780788079808080818082808380848085808680878088808980908091809280938094809580968097809880998100810181028103810481058106810781088109811081118112811381148115811681178118811981208121812281238124812581268127812881298130813181328133813481358136813781388139814081418142814381448145814681478148814981508151815281538154815581568157815881598160816181628163816481658166816781688169817081718172817381748175817681778178817981808181818281838184818581868187818881898190819181928193819481958196819781988199820082018202820382048205820682078208820982108211821282138214821582168217821882198220822182228223822482258226822782288229823082318232823382348235823682378238823982408241824282438244824582468247824882498250825182528253825482558256825782588259826082618262826382648265826682678268826982708271827282738274827582768277827882798280828182828283828482858286828782888289829082918292829382948295829682978298829983008301830283038304830583068307830883098310831183128313831483158316831783188319832083218322832383248325832683278328832983308331833283338334833583368337833883398340834183428343834483458346834783488349835083518352835383548355835683578358835983608361836283638364836583668367836883698370837183728373837483758376837783788379838083818382838383848385838683878388838983908391839283938394839583968397839883998400840184028403840484058406840784088409841084118412841384148415841684178418841984208421842284238424842584268427842884298430843184328433843484358436843784388439844084418442844384448445844684478448844984508451845284538454845584568457845884598460846184628463846484658466846784688469847084718472847384748475847684778478847984808481848284838484848584868487848884898490849184928493849484958496849784988499850085018502850385048505850685078508850985108511851285138514851585168517851885198520852185228523852485258526852785288529853085318532853385348535853685378538853985408541854285438544854585468547854885498550855185528553855485558556855785588559856085618562856385648565856685678568856985708571857285738574857585768577857885798580858185828583858485858586858785888589859085918592859385948595859685978598859986008601860286038604860586068607860886098610861186128613861486158616861786188619862086218622862386248625862686278628862986308631863286338634863586368637863886398640864186428643864486458646864786488649865086518652865386548655865686578658865986608661866286638664866586668667866886698670867186728673867486758676867786788679868086818682868386848685868686878688868986908691869286938694869586968697869886998700870187028703870487058706870787088709871087118712871387148715871687178718871987208721872287238724872587268727872887298730873187328733873487358736873787388739874087418742874387448745874687478748874987508751875287538754875587568757875887598760876187628763876487658766876787688769877087718772877387748775877687778778877987808781878287838784878587868787878887898790879187928793879487958796879787988799880088018802880388048805880688078808880988108811881288138814881588168817881888198820882188228823882488258826882788288829883088318832883388348835883688378838883988408841884288438844884588468847884888498850885188528853885488558856885788588859886088618862886388648865886688678868886988708871887288738874887588768877887888798880888188828883888488858886888788888889889088918892889388948895889688978898889989008901890289038904890589068907890889098910891189128913891489158916891789188919892089218922892389248925892689278928892989308931893289338934893589368937893889398940894189428943894489458946894789488949895089518952895389548955895689578958895989608961896289638964896589668967896889698970897189728973897489758976897789788979898089818982898389848985898689878988898989908991899289938994899589968997899889999000900190029003900490059006900790089009901090119012901390149015901690179018901990209021902290239024902590269027902890299030903190329033903490359036903790389039904090419042904390449045904690479048904990509051905290539054905590569057905890599060906190629063906490659066906790689069907090719072907390749075907690779078907990809081908290839084908590869087908890899090909190929093909490959096909790989099910091019102910391049105910691079108910991109111911291139114911591169117911891199120912191229123912491259126912791289129913091319132913391349135913691379138913991409141914291439144914591469147914891499150915191529153915491559156915791589159916091619162916391649165916691679168916991709171917291739174917591769177917891799180918191829183918491859186918791889189919091919192919391949195919691979198919992009201920292039204920592069207920892099210921192129213921492159216921792189219922092219222922392249225922692279228922992309231923292339234923592369237923892399240924192429243924492459246924792489249925092519252925392549255925692579258925992609261926292639264926592669267926892699270927192729273927492759276927792789279928092819282928392849285928692879288928992909291929292939294929592969297929892999300930193029303930493059306930793089309931093119312931393149315931693179318931993209321932293239324932593269327932893299330933193329333933493359336933793389339934093419342934393449345934693479348934993509351935293539354935593569357935893599360936193629363936493659366936793689369937093719372937393749375937693779378937993809381938293839384938593869387938893899390939193929393939493959396939793989399940094019402940394049405940694079408940994109411941294139414941594169417941894199420942194229423942494259426942794289429943094319432943394349435943694379438943994409441944294439444944594469447944894499450945194529453945494559456945794589459946094619462946394649465946694679468946994709471947294739474947594769477947894799480948194829483948494859486948794889489949094919492949394949495949694979498949995009501950295039504950595069507950895099510951195129513951495159516951795189519952095219522952395249525952695279528952995309531953295339534953595369537953895399540954195429543954495459546954795489549955095519552955395549555955695579558955995609561956295639564956595669567956895699570957195729573957495759576957795789579958095819582958395849585958695879588958995909591959295939594959595969597959895999600960196029603960496059606960796089609961096119612961396149615961696179618961996209621962296239624962596269627962896299630963196329633963496359636963796389639964096419642964396449645964696479648964996509651965296539654965596569657965896599660966196629663966496659666966796689669967096719672967396749675967696779678967996809681968296839684968596869687968896899690969196929693969496959696969796989699970097019702970397049705970697079708970997109711971297139714971597169717971897199720972197229723972497259726972797289729973097319732973397349735973697379738973997409741974297439744974597469747974897499750975197529753975497559756975797589759976097619762976397649765976697679768976997709771977297739774977597769777977897799780978197829783978497859786978797889789979097919792979397949795979697979798979998009801980298039804980598069807980898099810981198129813981498159816981798189819982098219822982398249825982698279828982998309831983298339834983598369837983898399840984198429843984498459846984798489849985098519852985398549855985698579858985998609861986298639864986598669867986898699870987198729873987498759876987798789879988098819882988398849885988698879888988998909891989298939894989598969897989898999900990199029903990499059906990799089909991099119912991399149915991699179918991999209921992299239924992599269927992899299930993199329933993499359936993799389939994099419942994399449945994699479948994999509951995299539954995599569957995899599960996199629963996499659966996799689969997099719972997399749975997699779978997999809981998299839984998599869987998899899990999199929993999499959996999799989999100001000110002100031000410005100061000710008100091001010011100121001310014100151001610017100181001910020100211002210023100241002510026100271002810029100301003110032100331003410035100361003710038100391004010041100421004310044100451004610047100481004910050100511005210053100541005510056100571005810059100601006110062100631006410065100661006710068100691007010071100721007310074100751007610077100781007910080100811008210083100841008510086100871008810089100901009110092100931009410095100961009710098100991010010101101021010310104101051010610107101081010910110101111011210113101141011510116101171011810119101201012110122101231012410125101261012710128101291013010131101321013310134101351013610137101381013910140101411014210143101441014510146101471014810149101501015110152101531015410155101561015710158101591016010161101621016310164101651016610167101681016910170101711017210173101741017510176101771017810179101801018110182101831018410185101861018710188101891019010191101921019310194101951019610197101981019910200102011020210203102041020510206102071020810209102101021110212102131021410215102161021710218102191022010221102221022310224102251022610227102281022910230102311023210233102341023510236102371023810239102401024110242102431024410245102461024710248102491025010251102521025310254102551025610257102581025910260102611026210263102641026510266102671026810269102701027110272102731027410275102761027710278102791028010281102821028310284102851028610287102881028910290102911029210293102941029510296102971029810299103001030110302103031030410305103061030710308103091031010311103121031310314103151031610317103181031910320103211032210323103241032510326103271032810329103301033110332103331033410335103361033710338103391034010341103421034310344103451034610347103481034910350103511035210353103541035510356103571035810359103601036110362103631036410365103661036710368103691037010371103721037310374103751037610377103781037910380103811038210383103841038510386103871038810389103901039110392103931039410395103961039710398103991040010401104021040310404104051040610407104081040910410104111041210413104141041510416104171041810419104201042110422104231042410425104261042710428104291043010431104321043310434104351043610437104381043910440104411044210443104441044510446104471044810449104501045110452104531045410455104561045710458104591046010461104621046310464104651046610467104681046910470104711047210473104741047510476104771047810479104801048110482104831048410485104861048710488104891049010491104921049310494104951049610497104981049910500105011050210503105041050510506105071050810509105101051110512105131051410515105161051710518105191052010521105221052310524105251052610527105281052910530105311053210533105341053510536105371053810539105401054110542105431054410545105461054710548105491055010551105521055310554105551055610557105581055910560105611056210563105641056510566105671056810569105701057110572105731057410575105761057710578105791058010581105821058310584105851058610587105881058910590105911059210593105941059510596105971059810599106001060110602106031060410605106061060710608106091061010611106121061310614106151061610617106181061910620106211062210623106241062510626106271062810629106301063110632106331063410635106361063710638106391064010641106421064310644106451064610647106481064910650106511065210653106541065510656106571065810659106601066110662106631066410665106661066710668106691067010671106721067310674106751067610677106781067910680106811068210683106841068510686106871068810689106901069110692106931069410695106961069710698106991070010701107021070310704107051070610707107081070910710107111071210713107141071510716107171071810719107201072110722107231072410725107261072710728107291073010731107321073310734107351073610737107381073910740107411074210743107441074510746107471074810749107501075110752107531075410755107561075710758107591076010761107621076310764107651076610767107681076910770107711077210773107741077510776107771077810779107801078110782107831078410785107861078710788107891079010791107921079310794107951079610797107981079910800108011080210803108041080510806108071080810809108101081110812108131081410815108161081710818108191082010821108221082310824108251082610827108281082910830108311083210833108341083510836108371083810839108401084110842108431084410845108461084710848108491085010851108521085310854108551085610857108581085910860108611086210863108641086510866108671086810869108701087110872108731087410875108761087710878108791088010881108821088310884108851088610887108881088910890108911089210893108941089510896108971089810899109001090110902109031090410905109061090710908109091091010911109121091310914109151091610917109181091910920109211092210923109241092510926109271092810929109301093110932109331093410935109361093710938109391094010941109421094310944109451094610947109481094910950109511095210953109541095510956109571095810959109601096110962109631096410965109661096710968109691097010971109721097310974109751097610977109781097910980109811098210983109841098510986109871098810989109901099110992109931099410995109961099710998109991100011001110021100311004110051100611007110081100911010110111101211013110141101511016110171101811019110201102111022110231102411025110261102711028110291103011031110321103311034110351103611037110381103911040110411104211043110441104511046110471104811049110501105111052110531105411055110561105711058110591106011061110621106311064110651106611067110681106911070110711107211073110741107511076110771107811079110801108111082110831108411085110861108711088110891109011091110921109311094110951109611097110981109911100111011110211103111041110511106111071110811109111101111111112111131111411115111161111711118111191112011121111221112311124111251112611127111281112911130111311113211133111341113511136111371113811139111401114111142111431114411145111461114711148111491115011151111521115311154111551115611157111581115911160111611116211163111641116511166111671116811169111701117111172111731117411175111761117711178111791118011181111821118311184111851118611187111881118911190111911119211193111941119511196111971119811199112001120111202112031120411205112061120711208112091121011211112121121311214112151121611217112181121911220112211122211223112241122511226112271122811229112301123111232112331123411235112361123711238112391124011241112421124311244112451124611247112481124911250112511125211253112541125511256112571125811259112601126111262112631126411265112661126711268112691127011271112721127311274112751127611277112781127911280112811128211283112841128511286112871128811289112901129111292112931129411295112961129711298112991130011301113021130311304113051130611307113081130911310113111131211313113141131511316113171131811319113201132111322113231132411325113261132711328113291133011331113321133311334113351133611337113381133911340113411134211343113441134511346113471134811349113501135111352113531135411355113561135711358113591136011361113621136311364113651136611367113681136911370113711137211373113741137511376113771137811379113801138111382113831138411385113861138711388113891139011391113921139311394113951139611397113981139911400114011140211403114041140511406114071140811409114101141111412114131141411415114161141711418114191142011421114221142311424114251142611427114281142911430114311143211433114341143511436114371143811439114401144111442114431144411445114461144711448114491145011451114521145311454114551145611457114581145911460114611146211463114641146511466114671146811469114701147111472114731147411475114761147711478114791148011481114821148311484114851148611487114881148911490114911149211493114941149511496114971149811499115001150111502115031150411505115061150711508115091151011511115121151311514115151151611517115181151911520115211152211523115241152511526115271152811529115301153111532115331153411535115361153711538115391154011541115421154311544115451154611547115481154911550115511155211553115541155511556115571155811559115601156111562115631156411565115661156711568115691157011571115721157311574115751157611577115781157911580115811158211583115841158511586115871158811589115901159111592115931159411595115961159711598115991160011601116021160311604116051160611607116081160911610116111161211613116141161511616116171161811619116201162111622116231162411625116261162711628116291163011631116321163311634116351163611637116381163911640116411164211643116441164511646116471164811649116501165111652116531165411655116561165711658116591166011661116621166311664116651166611667116681166911670116711167211673116741167511676116771167811679116801168111682116831168411685116861168711688116891169011691116921169311694116951169611697116981169911700117011170211703117041170511706117071170811709117101171111712117131171411715117161171711718117191172011721117221172311724117251172611727117281172911730117311173211733117341173511736117371173811739117401174111742117431174411745117461174711748117491175011751117521175311754117551175611757117581175911760117611176211763117641176511766117671176811769117701177111772117731177411775117761177711778117791178011781117821178311784117851178611787117881178911790117911179211793117941179511796117971179811799118001180111802118031180411805118061180711808118091181011811118121181311814118151181611817118181181911820118211182211823118241182511826118271182811829118301183111832118331183411835118361183711838118391184011841118421184311844118451184611847118481184911850118511185211853118541185511856118571185811859118601186111862118631186411865118661186711868118691187011871118721187311874118751187611877118781187911880118811188211883118841188511886118871188811889118901189111892118931189411895118961189711898118991190011901119021190311904119051190611907119081190911910119111191211913119141191511916119171191811919119201192111922119231192411925119261192711928119291193011931119321193311934119351193611937119381193911940119411194211943119441194511946119471194811949119501195111952119531195411955119561195711958119591196011961119621196311964119651196611967119681196911970119711197211973119741197511976119771197811979119801198111982119831198411985119861198711988119891199011991119921199311994119951199611997119981199912000120011200212003120041200512006120071200812009120101201112012120131201412015120161201712018120191202012021120221202312024120251202612027120281202912030120311203212033120341203512036120371203812039120401204112042120431204412045120461204712048120491205012051120521205312054120551205612057120581205912060120611206212063120641206512066120671206812069120701207112072120731207412075120761207712078120791208012081120821208312084120851208612087120881208912090120911209212093120941209512096120971209812099121001210112102121031210412105121061210712108121091211012111121121211312114121151211612117121181211912120121211212212123121241212512126121271212812129121301213112132121331213412135121361213712138121391214012141121421214312144121451214612147121481214912150121511215212153121541215512156121571215812159121601216112162121631216412165121661216712168121691217012171121721217312174121751217612177121781217912180121811218212183121841218512186121871218812189121901219112192121931219412195121961219712198121991220012201122021220312204122051220612207122081220912210122111221212213122141221512216122171221812219122201222112222122231222412225122261222712228122291223012231122321223312234122351223612237122381223912240122411224212243122441224512246122471224812249122501225112252122531225412255122561225712258122591226012261122621226312264122651226612267122681226912270122711227212273122741227512276122771227812279122801228112282122831228412285122861228712288122891229012291122921229312294122951229612297122981229912300123011230212303123041230512306123071230812309123101231112312123131231412315123161231712318123191232012321123221232312324123251232612327123281232912330123311233212333123341233512336123371233812339123401234112342123431234412345123461234712348123491235012351123521235312354123551235612357123581235912360123611236212363123641236512366123671236812369123701237112372123731237412375123761237712378123791238012381123821238312384123851238612387123881238912390123911239212393123941239512396123971239812399124001240112402124031240412405124061240712408124091241012411124121241312414124151241612417124181241912420124211242212423124241242512426124271242812429124301243112432124331243412435124361243712438124391244012441124421244312444124451244612447124481244912450124511245212453124541245512456124571245812459124601246112462124631246412465124661246712468124691247012471124721247312474124751247612477124781247912480124811248212483124841248512486124871248812489124901249112492124931249412495124961249712498124991250012501125021250312504125051250612507125081250912510125111251212513125141251512516125171251812519125201252112522125231252412525125261252712528125291253012531125321253312534125351253612537125381253912540125411254212543125441254512546125471254812549125501255112552125531255412555125561255712558125591256012561125621256312564125651256612567125681256912570125711257212573125741257512576125771257812579125801258112582125831258412585125861258712588125891259012591125921259312594125951259612597125981259912600126011260212603126041260512606126071260812609126101261112612126131261412615126161261712618126191262012621126221262312624126251262612627126281262912630126311263212633126341263512636126371263812639126401264112642126431264412645126461264712648126491265012651126521265312654126551265612657126581265912660126611266212663126641266512666126671266812669126701267112672126731267412675126761267712678126791268012681126821268312684126851268612687126881268912690126911269212693126941269512696126971269812699127001270112702127031270412705127061270712708127091271012711127121271312714127151271612717127181271912720127211272212723127241272512726127271272812729127301273112732127331273412735127361273712738127391274012741127421274312744127451274612747127481274912750127511275212753127541275512756127571275812759127601276112762127631276412765127661276712768127691277012771127721277312774127751277612777127781277912780127811278212783127841278512786127871278812789127901279112792127931279412795127961279712798127991280012801128021280312804128051280612807128081280912810128111281212813128141281512816128171281812819128201282112822128231282412825128261282712828128291283012831128321283312834128351283612837128381283912840128411284212843128441284512846128471284812849128501285112852128531285412855128561285712858128591286012861128621286312864128651286612867128681286912870128711287212873128741287512876128771287812879128801288112882128831288412885128861288712888128891289012891128921289312894128951289612897128981289912900129011290212903129041290512906129071290812909129101291112912129131291412915129161291712918129191292012921129221292312924129251292612927129281292912930129311293212933129341293512936129371293812939129401294112942129431294412945129461294712948129491295012951129521295312954129551295612957129581295912960129611296212963129641296512966129671296812969129701297112972129731297412975129761297712978129791298012981129821298312984129851298612987129881298912990129911299212993129941299512996129971299812999130001300113002130031300413005130061300713008130091301013011130121301313014130151301613017130181301913020130211302213023130241302513026130271302813029130301303113032130331303413035130361303713038130391304013041130421304313044130451304613047130481304913050130511305213053130541305513056130571305813059130601306113062130631306413065130661306713068130691307013071130721307313074130751307613077130781307913080130811308213083130841308513086130871308813089130901309113092130931309413095130961309713098130991310013101131021310313104131051310613107131081310913110131111311213113131141311513116131171311813119131201312113122131231312413125131261312713128131291313013131131321313313134131351313613137131381313913140131411314213143131441314513146131471314813149131501315113152131531315413155131561315713158131591316013161131621316313164131651316613167131681316913170131711317213173131741317513176131771317813179131801318113182131831318413185131861318713188131891319013191131921319313194131951319613197131981319913200132011320213203132041320513206132071320813209132101321113212132131321413215132161321713218132191322013221132221322313224132251322613227132281322913230132311323213233132341323513236132371323813239132401324113242132431324413245132461324713248132491325013251132521325313254132551325613257132581325913260132611326213263132641326513266132671326813269132701327113272132731327413275132761327713278132791328013281132821328313284132851328613287132881328913290132911329213293132941329513296132971329813299133001330113302133031330413305133061330713308133091331013311133121331313314133151331613317133181331913320133211332213323133241332513326133271332813329133301333113332133331333413335133361333713338133391334013341133421334313344133451334613347133481334913350133511335213353133541335513356133571335813359133601336113362133631336413365133661336713368133691337013371133721337313374133751337613377133781337913380133811338213383133841338513386133871338813389133901339113392133931339413395133961339713398133991340013401134021340313404134051340613407134081340913410134111341213413134141341513416134171341813419134201342113422134231342413425134261342713428134291343013431134321343313434134351343613437134381343913440134411344213443134441344513446134471344813449134501345113452134531345413455134561345713458134591346013461134621346313464134651346613467134681346913470134711347213473134741347513476134771347813479134801348113482134831348413485134861348713488134891349013491134921349313494134951349613497134981349913500135011350213503135041350513506135071350813509135101351113512135131351413515135161351713518135191352013521135221352313524135251352613527135281352913530135311353213533135341353513536135371353813539135401354113542135431354413545135461354713548135491355013551135521355313554135551355613557135581355913560135611356213563135641356513566135671356813569135701357113572135731357413575135761357713578135791358013581135821358313584135851358613587135881358913590135911359213593135941359513596135971359813599136001360113602136031360413605136061360713608136091361013611136121361313614136151361613617136181361913620136211362213623136241362513626136271362813629136301363113632136331363413635136361363713638136391364013641136421364313644136451364613647136481364913650136511365213653136541365513656136571365813659136601366113662136631366413665136661366713668136691367013671136721367313674136751367613677136781367913680136811368213683136841368513686136871368813689136901369113692136931369413695136961369713698136991370013701137021370313704137051370613707137081370913710137111371213713137141371513716137171371813719137201372113722137231372413725137261372713728137291373013731137321373313734137351373613737137381373913740137411374213743137441374513746137471374813749137501375113752137531375413755137561375713758137591376013761137621376313764137651376613767137681376913770137711377213773137741377513776137771377813779137801378113782137831378413785137861378713788137891379013791137921379313794137951379613797137981379913800138011380213803138041380513806138071380813809138101381113812138131381413815138161381713818138191382013821138221382313824138251382613827138281382913830138311383213833138341383513836138371383813839138401384113842138431384413845138461384713848138491385013851138521385313854138551385613857138581385913860138611386213863138641386513866138671386813869138701387113872138731387413875138761387713878138791388013881138821388313884138851388613887138881388913890138911389213893138941389513896138971389813899139001390113902139031390413905139061390713908139091391013911139121391313914139151391613917139181391913920139211392213923139241392513926139271392813929139301393113932139331393413935139361393713938139391394013941139421394313944139451394613947139481394913950139511395213953139541395513956139571395813959139601396113962139631396413965139661396713968139691397013971139721397313974139751397613977139781397913980139811398213983139841398513986139871398813989139901399113992139931399413995139961399713998139991400014001140021400314004140051400614007140081400914010140111401214013140141401514016140171401814019140201402114022140231402414025140261402714028140291403014031140321403314034140351403614037140381403914040140411404214043140441404514046140471404814049140501405114052140531405414055140561405714058140591406014061140621406314064140651406614067140681406914070140711407214073140741407514076140771407814079140801408114082140831408414085140861408714088140891409014091140921409314094140951409614097140981409914100141011410214103141041410514106141071410814109141101411114112141131411414115141161411714118141191412014121141221412314124141251412614127141281412914130141311413214133141341413514136141371413814139141401414114142141431414414145141461414714148141491415014151141521415314154141551415614157141581415914160141611416214163141641416514166141671416814169141701417114172141731417414175141761417714178141791418014181141821418314184141851418614187141881418914190141911419214193141941419514196141971419814199142001420114202142031420414205142061420714208142091421014211142121421314214142151421614217142181421914220142211422214223142241422514226142271422814229142301423114232142331423414235142361423714238142391424014241142421424314244142451424614247142481424914250142511425214253142541425514256142571425814259142601426114262142631426414265142661426714268142691427014271142721427314274142751427614277142781427914280142811428214283142841428514286142871428814289142901429114292142931429414295142961429714298142991430014301143021430314304143051430614307143081430914310143111431214313143141431514316143171431814319143201432114322143231432414325143261432714328143291433014331143321433314334143351433614337143381433914340143411434214343143441434514346143471434814349143501435114352143531435414355143561435714358143591436014361143621436314364143651436614367143681436914370143711437214373143741437514376143771437814379143801438114382143831438414385143861438714388143891439014391143921439314394143951439614397143981439914400144011440214403144041440514406144071440814409144101441114412144131441414415144161441714418144191442014421144221442314424144251442614427144281442914430144311443214433144341443514436144371443814439144401444114442144431444414445144461444714448144491445014451144521445314454144551445614457144581445914460144611446214463144641446514466144671446814469144701447114472144731447414475144761447714478144791448014481144821448314484144851448614487144881448914490144911449214493144941449514496144971449814499145001450114502145031450414505145061450714508145091451014511145121451314514145151451614517145181451914520145211452214523145241452514526145271452814529145301453114532145331453414535145361453714538145391454014541145421454314544145451454614547145481454914550145511455214553145541455514556145571455814559145601456114562145631456414565145661456714568145691457014571145721457314574145751457614577145781457914580145811458214583145841458514586145871458814589145901459114592145931459414595145961459714598145991460014601146021460314604146051460614607146081460914610146111461214613146141461514616146171461814619146201462114622146231462414625146261462714628146291463014631146321463314634146351463614637146381463914640146411464214643146441464514646146471464814649146501465114652146531465414655146561465714658146591466014661146621466314664146651466614667146681466914670146711467214673146741467514676146771467814679146801468114682146831468414685146861468714688146891469014691146921469314694146951469614697146981469914700147011470214703147041470514706147071470814709147101471114712147131471414715147161471714718147191472014721147221472314724147251472614727147281472914730147311473214733147341473514736147371473814739147401474114742147431474414745147461474714748147491475014751147521475314754147551475614757147581475914760147611476214763147641476514766147671476814769147701477114772147731477414775147761477714778147791478014781147821478314784147851478614787147881478914790147911479214793147941479514796147971479814799148001480114802148031480414805148061480714808148091481014811148121481314814148151481614817148181481914820148211482214823148241482514826148271482814829148301483114832148331483414835148361483714838148391484014841148421484314844148451484614847148481484914850148511485214853148541485514856148571485814859148601486114862148631486414865148661486714868148691487014871148721487314874148751487614877148781487914880148811488214883148841488514886148871488814889148901489114892148931489414895148961489714898148991490014901149021490314904149051490614907149081490914910149111491214913149141491514916149171491814919149201492114922149231492414925149261492714928149291493014931149321493314934149351493614937149381493914940149411494214943149441494514946149471494814949149501495114952149531495414955149561495714958149591496014961149621496314964149651496614967149681496914970149711497214973149741497514976149771497814979149801498114982149831498414985149861498714988149891499014991149921499314994149951499614997149981499915000150011500215003150041500515006150071500815009150101501115012150131501415015150161501715018150191502015021150221502315024150251502615027150281502915030150311503215033150341503515036150371503815039150401504115042150431504415045150461504715048150491505015051150521505315054150551505615057150581505915060150611506215063150641506515066150671506815069150701507115072150731507415075150761507715078150791508015081150821508315084150851508615087150881508915090150911509215093150941509515096150971509815099151001510115102151031510415105151061510715108151091511015111151121511315114151151511615117151181511915120151211512215123151241512515126151271512815129151301513115132151331513415135151361513715138151391514015141151421514315144151451514615147151481514915150151511515215153151541515515156151571515815159151601516115162151631516415165151661516715168151691517015171151721517315174151751517615177151781517915180151811518215183151841518515186151871518815189151901519115192151931519415195151961519715198151991520015201152021520315204152051520615207152081520915210152111521215213152141521515216152171521815219152201522115222152231522415225152261522715228152291523015231152321523315234152351523615237152381523915240152411524215243152441524515246152471524815249152501525115252152531525415255152561525715258152591526015261152621526315264152651526615267152681526915270152711527215273152741527515276152771527815279152801528115282152831528415285152861528715288152891529015291152921529315294152951529615297152981529915300153011530215303153041530515306153071530815309153101531115312153131531415315153161531715318153191532015321153221532315324153251532615327153281532915330153311533215333153341533515336153371533815339153401534115342153431534415345153461534715348153491535015351153521535315354153551535615357153581535915360153611536215363153641536515366153671536815369153701537115372153731537415375153761537715378153791538015381153821538315384153851538615387153881538915390153911539215393153941539515396153971539815399154001540115402154031540415405154061540715408154091541015411154121541315414154151541615417154181541915420154211542215423154241542515426154271542815429154301543115432154331543415435154361543715438154391544015441154421544315444154451544615447154481544915450154511545215453154541545515456154571545815459154601546115462154631546415465154661546715468154691547015471154721547315474154751547615477154781547915480154811548215483154841548515486154871548815489154901549115492154931549415495154961549715498154991550015501155021550315504155051550615507155081550915510155111551215513155141551515516155171551815519155201552115522155231552415525155261552715528155291553015531155321553315534155351553615537155381553915540155411554215543155441554515546155471554815549155501555115552155531555415555155561555715558155591556015561155621556315564155651556615567155681556915570155711557215573155741557515576155771557815579155801558115582155831558415585155861558715588155891559015591155921559315594155951559615597155981559915600156011560215603156041560515606156071560815609156101561115612156131561415615156161561715618156191562015621156221562315624156251562615627156281562915630156311563215633156341563515636156371563815639156401564115642156431564415645156461564715648156491565015651156521565315654156551565615657156581565915660156611566215663156641566515666156671566815669156701567115672156731567415675156761567715678156791568015681156821568315684156851568615687156881568915690156911569215693156941569515696156971569815699157001570115702157031570415705157061570715708157091571015711157121571315714157151571615717157181571915720157211572215723157241572515726157271572815729157301573115732157331573415735157361573715738157391574015741157421574315744157451574615747157481574915750157511575215753157541575515756157571575815759157601576115762157631576415765157661576715768157691577015771157721577315774157751577615777157781577915780157811578215783157841578515786157871578815789157901579115792157931579415795157961579715798157991580015801158021580315804158051580615807158081580915810158111581215813158141581515816158171581815819158201582115822158231582415825158261582715828158291583015831158321583315834158351583615837158381583915840158411584215843158441584515846158471584815849158501585115852158531585415855158561585715858158591586015861158621586315864158651586615867158681586915870158711587215873158741587515876158771587815879158801588115882158831588415885158861588715888158891589015891158921589315894158951589615897158981589915900159011590215903159041590515906159071590815909159101591115912159131591415915159161591715918159191592015921159221592315924159251592615927159281592915930159311593215933159341593515936159371593815939159401594115942159431594415945159461594715948159491595015951159521595315954159551595615957159581595915960159611596215963159641596515966159671596815969159701597115972159731597415975159761597715978159791598015981159821598315984159851598615987159881598915990159911599215993159941599515996159971599815999160001600116002160031600416005160061600716008160091601016011160121601316014160151601616017160181601916020160211602216023160241602516026160271602816029160301603116032160331603416035160361603716038160391604016041160421604316044160451604616047160481604916050160511605216053160541605516056160571605816059160601606116062160631606416065160661606716068160691607016071160721607316074160751607616077160781607916080160811608216083160841608516086160871608816089160901609116092160931609416095160961609716098160991610016101161021610316104161051610616107161081610916110161111611216113161141611516116161171611816119161201612116122161231612416125161261612716128161291613016131161321613316134161351613616137161381613916140161411614216143161441614516146161471614816149161501615116152161531615416155161561615716158161591616016161161621616316164161651616616167161681616916170161711617216173161741617516176161771617816179161801618116182161831618416185161861618716188161891619016191161921619316194161951619616197161981619916200162011620216203162041620516206162071620816209162101621116212162131621416215162161621716218162191622016221162221622316224162251622616227162281622916230162311623216233162341623516236162371623816239162401624116242162431624416245162461624716248162491625016251162521625316254162551625616257162581625916260162611626216263162641626516266162671626816269162701627116272162731627416275162761627716278162791628016281162821628316284162851628616287162881628916290162911629216293162941629516296162971629816299163001630116302163031630416305163061630716308163091631016311163121631316314163151631616317163181631916320163211632216323163241632516326163271632816329163301633116332163331633416335163361633716338163391634016341163421634316344163451634616347163481634916350163511635216353163541635516356163571635816359163601636116362163631636416365163661636716368163691637016371163721637316374163751637616377163781637916380163811638216383163841638516386163871638816389163901639116392163931639416395163961639716398163991640016401164021640316404164051640616407164081640916410164111641216413164141641516416164171641816419164201642116422164231642416425164261642716428164291643016431164321643316434164351643616437164381643916440164411644216443164441644516446164471644816449164501645116452164531645416455164561645716458164591646016461164621646316464164651646616467164681646916470164711647216473164741647516476164771647816479164801648116482164831648416485164861648716488164891649016491164921649316494164951649616497164981649916500165011650216503165041650516506165071650816509165101651116512165131651416515165161651716518165191652016521165221652316524165251652616527165281652916530165311653216533165341653516536165371653816539165401654116542165431654416545165461654716548165491655016551165521655316554165551655616557165581655916560165611656216563165641656516566165671656816569165701657116572165731657416575165761657716578165791658016581165821658316584165851658616587165881658916590165911659216593165941659516596165971659816599166001660116602166031660416605166061660716608166091661016611166121661316614166151661616617166181661916620166211662216623166241662516626166271662816629166301663116632166331663416635166361663716638166391664016641166421664316644166451664616647166481664916650166511665216653166541665516656166571665816659166601666116662166631666416665166661666716668166691667016671166721667316674166751667616677166781667916680166811668216683166841668516686166871668816689166901669116692166931669416695166961669716698166991670016701167021670316704167051670616707167081670916710167111671216713167141671516716167171671816719167201672116722167231672416725167261672716728167291673016731167321673316734167351673616737167381673916740167411674216743167441674516746167471674816749167501675116752167531675416755167561675716758167591676016761167621676316764167651676616767167681676916770167711677216773167741677516776167771677816779167801678116782167831678416785167861678716788167891679016791167921679316794167951679616797167981679916800168011680216803168041680516806168071680816809168101681116812168131681416815168161681716818168191682016821168221682316824168251682616827168281682916830168311683216833168341683516836168371683816839168401684116842168431684416845168461684716848168491685016851168521685316854168551685616857168581685916860168611686216863168641686516866168671686816869168701687116872168731687416875168761687716878168791688016881168821688316884168851688616887168881688916890168911689216893168941689516896168971689816899169001690116902169031690416905169061690716908169091691016911169121691316914169151691616917169181691916920169211692216923169241692516926169271692816929169301693116932169331693416935169361693716938169391694016941169421694316944169451694616947169481694916950169511695216953169541695516956169571695816959169601696116962169631696416965169661696716968169691697016971169721697316974169751697616977169781697916980169811698216983169841698516986169871698816989169901699116992169931699416995169961699716998169991700017001170021700317004170051700617007170081700917010170111701217013170141701517016170171701817019170201702117022170231702417025170261702717028170291703017031170321703317034170351703617037170381703917040170411704217043170441704517046170471704817049170501705117052170531705417055170561705717058170591706017061170621706317064170651706617067170681706917070170711707217073170741707517076170771707817079170801708117082170831708417085170861708717088170891709017091170921709317094170951709617097170981709917100171011710217103171041710517106171071710817109171101711117112171131711417115171161711717118171191712017121171221712317124171251712617127171281712917130171311713217133171341713517136171371713817139171401714117142171431714417145171461714717148171491715017151171521715317154171551715617157171581715917160171611716217163171641716517166171671716817169171701717117172171731717417175171761717717178171791718017181171821718317184171851718617187171881718917190171911719217193171941719517196171971719817199172001720117202172031720417205172061720717208172091721017211172121721317214172151721617217172181721917220172211722217223172241722517226172271722817229172301723117232172331723417235172361723717238172391724017241172421724317244172451724617247172481724917250172511725217253172541725517256172571725817259172601726117262172631726417265172661726717268172691727017271172721727317274172751727617277172781727917280172811728217283172841728517286172871728817289172901729117292172931729417295172961729717298172991730017301173021730317304173051730617307173081730917310173111731217313173141731517316173171731817319173201732117322173231732417325173261732717328173291733017331173321733317334173351733617337173381733917340173411734217343173441734517346173471734817349173501735117352173531735417355173561735717358173591736017361173621736317364173651736617367173681736917370173711737217373173741737517376173771737817379173801738117382173831738417385173861738717388173891739017391173921739317394173951739617397173981739917400174011740217403174041740517406174071740817409174101741117412174131741417415174161741717418174191742017421174221742317424174251742617427174281742917430174311743217433174341743517436174371743817439174401744117442174431744417445174461744717448174491745017451174521745317454174551745617457174581745917460174611746217463174641746517466174671746817469174701747117472174731747417475174761747717478174791748017481174821748317484174851748617487174881748917490174911749217493174941749517496174971749817499175001750117502175031750417505175061750717508175091751017511175121751317514175151751617517175181751917520175211752217523175241752517526175271752817529175301753117532175331753417535175361753717538175391754017541175421754317544175451754617547175481754917550175511755217553175541755517556175571755817559175601756117562175631756417565175661756717568175691757017571175721757317574175751757617577175781757917580175811758217583175841758517586175871758817589175901759117592175931759417595175961759717598175991760017601176021760317604176051760617607176081760917610176111761217613176141761517616176171761817619176201762117622176231762417625176261762717628176291763017631176321763317634176351763617637176381763917640176411764217643176441764517646176471764817649176501765117652176531765417655176561765717658176591766017661176621766317664176651766617667176681766917670176711767217673176741767517676176771767817679176801768117682176831768417685176861768717688176891769017691176921769317694176951769617697176981769917700177011770217703177041770517706177071770817709177101771117712177131771417715177161771717718177191772017721177221772317724177251772617727177281772917730177311773217733177341773517736177371773817739177401774117742177431774417745177461774717748177491775017751177521775317754177551775617757177581775917760177611776217763177641776517766177671776817769177701777117772177731777417775177761777717778177791778017781177821778317784177851778617787177881778917790177911779217793177941779517796177971779817799178001780117802178031780417805178061780717808178091781017811178121781317814178151781617817178181781917820178211782217823178241782517826178271782817829178301783117832178331783417835178361783717838178391784017841178421784317844178451784617847178481784917850178511785217853178541785517856178571785817859178601786117862178631786417865178661786717868178691787017871178721787317874178751787617877178781787917880178811788217883178841788517886178871788817889178901789117892178931789417895178961789717898178991790017901179021790317904179051790617907179081790917910179111791217913179141791517916179171791817919179201792117922179231792417925179261792717928179291793017931179321793317934179351793617937179381793917940179411794217943179441794517946179471794817949179501795117952179531795417955179561795717958179591796017961179621796317964179651796617967179681796917970179711797217973179741797517976179771797817979179801798117982179831798417985179861798717988179891799017991179921799317994179951799617997179981799918000180011800218003180041800518006180071800818009180101801118012180131801418015180161801718018180191802018021180221802318024180251802618027180281802918030180311803218033180341803518036180371803818039180401804118042180431804418045180461804718048180491805018051180521805318054180551805618057180581805918060180611806218063180641806518066180671806818069180701807118072180731807418075180761807718078180791808018081180821808318084180851808618087180881808918090180911809218093180941809518096180971809818099181001810118102181031810418105181061810718108181091811018111181121811318114181151811618117181181811918120181211812218123181241812518126181271812818129181301813118132181331813418135181361813718138181391814018141181421814318144181451814618147181481814918150181511815218153181541815518156181571815818159181601816118162181631816418165181661816718168181691817018171181721817318174181751817618177181781817918180181811818218183181841818518186181871818818189181901819118192181931819418195181961819718198181991820018201182021820318204182051820618207182081820918210182111821218213182141821518216182171821818219182201822118222182231822418225182261822718228182291823018231182321823318234182351823618237182381823918240182411824218243182441824518246182471824818249182501825118252182531825418255182561825718258182591826018261182621826318264182651826618267182681826918270182711827218273182741827518276182771827818279182801828118282182831828418285182861828718288182891829018291182921829318294182951829618297182981829918300183011830218303183041830518306183071830818309183101831118312183131831418315183161831718318183191832018321183221832318324183251832618327183281832918330183311833218333183341833518336183371833818339183401834118342183431834418345183461834718348183491835018351183521835318354183551835618357183581835918360183611836218363183641836518366183671836818369183701837118372183731837418375183761837718378183791838018381183821838318384183851838618387183881838918390183911839218393183941839518396183971839818399184001840118402184031840418405184061840718408184091841018411184121841318414184151841618417184181841918420184211842218423184241842518426184271842818429184301843118432184331843418435184361843718438184391844018441184421844318444184451844618447184481844918450184511845218453184541845518456184571845818459184601846118462184631846418465184661846718468184691847018471184721847318474184751847618477184781847918480184811848218483184841848518486184871848818489184901849118492184931849418495184961849718498184991850018501185021850318504185051850618507185081850918510185111851218513185141851518516185171851818519185201852118522185231852418525185261852718528185291853018531185321853318534185351853618537185381853918540185411854218543185441854518546185471854818549185501855118552185531855418555185561855718558185591856018561185621856318564185651856618567185681856918570185711857218573185741857518576185771857818579185801858118582185831858418585185861858718588185891859018591185921859318594185951859618597185981859918600186011860218603186041860518606186071860818609186101861118612186131861418615186161861718618186191862018621186221862318624186251862618627186281862918630186311863218633186341863518636186371863818639186401864118642186431864418645186461864718648186491865018651186521865318654186551865618657186581865918660186611866218663186641866518666186671866818669186701867118672186731867418675186761867718678186791868018681186821868318684186851868618687186881868918690186911869218693186941869518696186971869818699187001870118702187031870418705187061870718708187091871018711187121871318714187151871618717187181871918720187211872218723187241872518726187271872818729187301873118732187331873418735187361873718738187391874018741187421874318744187451874618747187481874918750187511875218753187541875518756187571875818759187601876118762187631876418765187661876718768187691877018771187721877318774187751877618777187781877918780187811878218783187841878518786187871878818789187901879118792187931879418795187961879718798187991880018801188021880318804188051880618807188081880918810188111881218813188141881518816188171881818819188201882118822188231882418825188261882718828188291883018831188321883318834188351883618837188381883918840188411884218843188441884518846188471884818849188501885118852188531885418855188561885718858188591886018861188621886318864188651886618867188681886918870188711887218873188741887518876188771887818879188801888118882188831888418885188861888718888188891889018891188921889318894188951889618897188981889918900189011890218903189041890518906189071890818909189101891118912189131891418915189161891718918189191892018921189221892318924189251892618927189281892918930189311893218933189341893518936189371893818939189401894118942189431894418945189461894718948189491895018951189521895318954189551895618957189581895918960189611896218963189641896518966189671896818969189701897118972189731897418975189761897718978189791898018981189821898318984189851898618987189881898918990189911899218993189941899518996189971899818999190001900119002190031900419005190061900719008190091901019011190121901319014190151901619017190181901919020190211902219023190241902519026190271902819029190301903119032190331903419035190361903719038190391904019041190421904319044190451904619047190481904919050190511905219053190541905519056190571905819059190601906119062190631906419065190661906719068190691907019071190721907319074190751907619077190781907919080190811908219083190841908519086190871908819089190901909119092190931909419095190961909719098190991910019101191021910319104191051910619107191081910919110191111911219113191141911519116191171911819119191201912119122191231912419125191261912719128191291913019131191321913319134191351913619137191381913919140191411914219143191441914519146191471914819149191501915119152191531915419155191561915719158191591916019161191621916319164191651916619167191681916919170191711917219173191741917519176191771917819179191801918119182191831918419185191861918719188191891919019191191921919319194191951919619197191981919919200192011920219203192041920519206192071920819209192101921119212192131921419215192161921719218192191922019221192221922319224192251922619227192281922919230192311923219233192341923519236192371923819239192401924119242192431924419245192461924719248192491925019251192521925319254192551925619257192581925919260192611926219263192641926519266192671926819269192701927119272192731927419275192761927719278192791928019281192821928319284192851928619287192881928919290192911929219293192941929519296192971929819299193001930119302193031930419305193061930719308193091931019311193121931319314193151931619317193181931919320193211932219323193241932519326193271932819329193301933119332193331933419335193361933719338193391934019341193421934319344193451934619347193481934919350193511935219353193541935519356193571935819359193601936119362193631936419365193661936719368193691937019371193721937319374193751937619377193781937919380193811938219383193841938519386193871938819389193901939119392193931939419395193961939719398193991940019401194021940319404194051940619407194081940919410194111941219413194141941519416194171941819419194201942119422194231942419425194261942719428194291943019431194321943319434194351943619437194381943919440194411944219443194441944519446194471944819449194501945119452194531945419455194561945719458194591946019461194621946319464194651946619467194681946919470194711947219473194741947519476194771947819479194801948119482194831948419485194861948719488194891949019491194921949319494194951949619497194981949919500195011950219503195041950519506195071950819509195101951119512195131951419515195161951719518195191952019521195221952319524195251952619527195281952919530195311953219533195341953519536195371953819539195401954119542195431954419545195461954719548195491955019551195521955319554195551955619557195581955919560195611956219563195641956519566195671956819569195701957119572195731957419575195761957719578195791958019581195821958319584195851958619587195881958919590195911959219593195941959519596195971959819599196001960119602196031960419605196061960719608196091961019611196121961319614196151961619617196181961919620196211962219623196241962519626196271962819629196301963119632196331963419635196361963719638196391964019641196421964319644196451964619647196481964919650196511965219653196541965519656196571965819659196601966119662196631966419665196661966719668196691967019671196721967319674196751967619677196781967919680196811968219683196841968519686196871968819689196901969119692196931969419695196961969719698196991970019701197021970319704197051970619707197081970919710197111971219713197141971519716197171971819719197201972119722197231972419725197261972719728197291973019731197321973319734197351973619737197381973919740197411974219743197441974519746197471974819749197501975119752197531975419755197561975719758197591976019761197621976319764197651976619767197681976919770197711977219773197741977519776197771977819779197801978119782197831978419785197861978719788197891979019791197921979319794197951979619797197981979919800198011980219803198041980519806198071980819809198101981119812198131981419815198161981719818198191982019821198221982319824198251982619827198281982919830198311983219833198341983519836198371983819839198401984119842198431984419845198461984719848198491985019851198521985319854198551985619857198581985919860198611986219863198641986519866198671986819869198701987119872198731987419875198761987719878198791988019881198821988319884198851988619887198881988919890198911989219893198941989519896198971989819899199001990119902199031990419905199061990719908199091991019911199121991319914199151991619917199181991919920199211992219923199241992519926199271992819929199301993119932199331993419935199361993719938199391994019941199421994319944199451994619947199481994919950199511995219953199541995519956199571995819959 | 
							- <?xml version="1.0"?>
 
- <doc>
 
-     <assembly>
 
-         <name>Quartz</name>
 
-     </assembly>
 
-     <members>
 
-         <member name="T:Quartz.Collection.HashSet`1">
 
-             <summary>
 
-             A wrapper for generic HashSet that brings a common interface.
 
-             </summary>
 
-             <typeparam name="T"></typeparam>
 
-         </member>
 
-         <member name="T:Quartz.Collection.ISet`1">
 
-             <summary>
 
-             Represents a collection ob objects that contains no duplicate elements.
 
-             </summary>	
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Collection.ISortedSet`1">
 
-             <summary>
 
-             A sorted set.
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Collection.ISortedSet`1.TailSet(`0)">
 
-             <summary>
 
-             Returns a portion of the list whose elements are greater than the limit object parameter.
 
-             </summary>
 
-             <param name="limit">The start element of the portion to extract.</param>
 
-             <returns>The portion of the collection whose elements are greater than the limit object parameter.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Collection.ISortedSet`1.First">
 
-             <summary>
 
-             Returns the first item in the set.
 
-             </summary>
 
-             <returns>First object.</returns>
 
-         </member>
 
-         <member name="P:Quartz.Collection.ISortedSet`1.Item(System.Int32)">
 
-             <summary>
 
-             Returns the object in the specified index.
 
-             </summary>
 
-             <param name="index"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Collection.ReadOnlySet`1.#ctor(Quartz.Collection.ISet{`0})">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Collection.ReadOnlySet`1"/> class.
 
-             </summary>
 
-             <param name="internalSet">The internal set to wrap.</param>
 
-             <exception cref="T:System.ArgumentNullException">internalSet</exception>
 
-         </member>
 
-         <member name="T:Quartz.Collection.TreeSet`1">
 
-             <summary>
 
-             Simple C5 wrapper for common interface.
 
-             </summary>
 
-             <typeparam name="T"></typeparam>
 
-         </member>
 
-         <member name="M:Quartz.Collection.TreeSet`1.#ctor">
 
-             <summary>
 
-             Default constructor.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Collection.TreeSet`1.#ctor(System.Collections.Generic.IComparer{`0})">
 
-             <summary>
 
-             Constructor that accepts comparer.
 
-             </summary>
 
-             <param name="comparer">Comparer to use.</param>
 
-         </member>
 
-         <member name="M:Quartz.Collection.TreeSet`1.#ctor(System.Collections.Generic.IEnumerable{`0})">
 
-             <summary>
 
-             Constructor that prepolutates.
 
-             </summary>
 
-             <param name="items"></param>
 
-         </member>
 
-         <member name="M:Quartz.Collection.TreeSet`1.First">
 
-             <summary>
 
-             Returns the first element.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Collection.TreeSet`1.TailSet(`0)">
 
-             <summary>
 
-             Return items from given range.
 
-             </summary>
 
-             <param name="limit"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Collection.TreeSet`1.Quartz#Collection#ISortedSet{T}#Item(System.Int32)">
 
-             <summary>
 
-             Indexer.
 
-             </summary>
 
-             <param name="index"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Collection.TreeSet">
 
-             <summary>
 
-             Only for backwards compatibility with serialization!
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Core.IJobRunShellFactory">
 
-             <summary>
 
-             Responsible for creating the instances of <see cref="T:Quartz.Core.JobRunShell"/>
 
-             to be used within the <see cref="T:Quartz.Core.QuartzScheduler"/> instance.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Core.IJobRunShellFactory.Initialize(Quartz.IScheduler)">
 
-             <summary>
 
-             Initialize the factory, providing a handle to the <see cref="T:Quartz.IScheduler"/>
 
-             that should be made available within the <see cref="T:Quartz.Core.JobRunShell"/> and 
 
-             the <see cref="T:Quartz.IJobExecutionContext"/>s within it.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.IJobRunShellFactory.CreateJobRunShell(Quartz.Spi.TriggerFiredBundle)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.Core.QuartzSchedulerThread"/>
 
-             to obtain instances of <see cref="T:Quartz.Core.JobRunShell"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Core.JobRunShell">
 
-             <summary> 
 
-             JobRunShell instances are responsible for providing the 'safe' environment
 
-             for <see cref="T:Quartz.IJob"/> s to run in, and for performing all of the work of
 
-             executing the <see cref="T:Quartz.IJob"/>, catching ANY thrown exceptions, updating
 
-             the <see cref="T:Quartz.ITrigger"/> with the <see cref="T:Quartz.IJob"/>'s completion code,
 
-             etc.
 
-             <para>
 
-             A <see cref="T:Quartz.Core.JobRunShell"/> instance is created by a <see cref="T:Quartz.Core.IJobRunShellFactory"/>
 
-             on behalf of the <see cref="T:Quartz.Core.QuartzSchedulerThread"/> which then runs the
 
-             shell in a thread from the configured <see cref="T:System.Threading.ThreadPool"/> when the
 
-             scheduler determines that a <see cref="T:Quartz.IJob"/> has been triggered.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="T:Quartz.Core.IJobRunShellFactory"/> 
 
-             <seealso cref="T:Quartz.Core.QuartzSchedulerThread"/>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Listener.SchedulerListenerSupport">
 
-             <summary>
 
-              A helpful abstract base class for implementors of 
 
-             <see cref="T:Quartz.ISchedulerListener"/>.
 
-             </summary>
 
-             <remarks>
 
-             The methods in this class are empty so you only need to override the  
 
-             subset for the <see cref="T:Quartz.ISchedulerListener"/> events you care about.
 
-             </remarks>
 
-             <author>Marko Lahma (.NET)</author>
 
-             <seealso cref="T:Quartz.ISchedulerListener"/>
 
-         </member>
 
-         <member name="T:Quartz.ISchedulerListener">
 
-             <summary>
 
-             The interface to be implemented by classes that want to be informed of major
 
-             <see cref="T:Quartz.IScheduler"/> events.
 
-             </summary>
 
-             <seealso cref="T:Quartz.IScheduler"/>
 
-             <seealso cref="T:Quartz.IJobListener"/>
 
-             <seealso cref="T:Quartz.ITriggerListener"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.JobScheduled(Quartz.ITrigger)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             is scheduled.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.JobUnscheduled(Quartz.TriggerKey)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             is unscheduled.
 
-             </summary>
 
-             <seealso cref="M:Quartz.ISchedulerListener.SchedulingDataCleared"/>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.TriggerFinalized(Quartz.ITrigger)">
 
-             <summary> 
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             has reached the condition in which it will never fire again.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.TriggerPaused(Quartz.TriggerKey)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> a <see cref="T:Quartz.ITrigger"/>s has been paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.TriggersPaused(System.String)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> a group of 
 
-             <see cref="T:Quartz.ITrigger"/>s has been paused.
 
-             </summary>
 
-             <remarks>
 
-             If a all groups were paused, then the <see param="triggerName"/> parameter
 
-             will be null.
 
-             </remarks>
 
-             <param name="triggerGroup">The trigger group.</param>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.TriggerResumed(Quartz.TriggerKey)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             has been un-paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.TriggersResumed(System.String)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a
 
-             group of <see cref="T:Quartz.ITrigger"/>s has been un-paused.
 
-             </summary>
 
-             <remarks>
 
-             If all groups were resumed, then the <see param="triggerName"/> parameter
 
-             will be null.
 
-             </remarks>
 
-             <param name="triggerGroup">The trigger group.</param>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.JobAdded(Quartz.IJobDetail)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             has been added.
 
-             </summary>
 
-             <param name="jobDetail"></param>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.JobDeleted(Quartz.JobKey)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             has been deleted.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.JobPaused(Quartz.JobKey)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             has been  paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.JobsPaused(System.String)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a
 
-             group of <see cref="T:Quartz.IJobDetail"/>s has been  paused.
 
-             <para>
 
-             If all groups were paused, then the <see param="jobName"/> parameter will be
 
-             null. If all jobs were paused, then both parameters will be null.
 
-             </para>
 
-             </summary>
 
-             <param name="jobGroup">The job group.</param>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.JobResumed(Quartz.JobKey)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             has been  un-paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.JobsResumed(System.String)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             has been  un-paused.
 
-             </summary>
 
-             <param name="jobGroup">The job group.</param>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.SchedulerError(System.String,Quartz.SchedulerException)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a serious error has
 
-             occurred within the scheduler - such as repeated failures in the <see cref="T:Quartz.Spi.IJobStore"/>,
 
-             or the inability to instantiate a <see cref="T:Quartz.IJob"/> instance when its
 
-             <see cref="T:Quartz.ITrigger"/> has fired.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.SchedulerInStandbyMode">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> to inform the listener
 
-             that it has move to standby mode.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.SchedulerStarted">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> to inform the listener
 
-             that it has started.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.SchedulerStarting">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> to inform the listener that it is starting.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.SchedulerShutdown">
 
-             <summary> 
 
-             Called by the <see cref="T:Quartz.IScheduler"/> to inform the listener
 
-             that it has Shutdown.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.SchedulerShuttingdown">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> to inform the listener
 
-             that it has begun the shutdown sequence.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.SchedulingDataCleared">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> to inform the listener
 
-             that all jobs, triggers and calendars were deleted.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Listener.SchedulerListenerSupport.Log">
 
-             <summary>
 
-             Get the <see cref="T:Common.Logging.ILog"/> for this
 
-             type's category.  This should be used by subclasses for logging.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.IThreadRunnable">
 
-             <summary>
 
-             This interface should be implemented by any class whose instances are intended 
 
-             to be executed by a thread.
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.IThreadRunnable.Run">
 
-             <summary>
 
-             This method has to be implemented in order that starting of the thread causes the object's 
 
-             run method to be called in that separately executing thread.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.JobRunShell.#ctor(Quartz.IScheduler,Quartz.Spi.TriggerFiredBundle)">
 
-             <summary>
 
-             Create a JobRunShell instance with the given settings.
 
-             </summary>
 
-             <param name="scheduler">The <see cref="T:Quartz.IScheduler"/> instance that should be made
 
-             available within the <see cref="T:Quartz.IJobExecutionContext"/>.</param>
 
-             <param name="bundle"></param>
 
-         </member>
 
-         <member name="M:Quartz.Core.JobRunShell.Initialize(Quartz.Core.QuartzScheduler)">
 
-             <summary>
 
-             Initializes the job execution context with given scheduler and bundle.
 
-             </summary>
 
-             <param name="sched">The scheduler.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.JobRunShell.RequestShutdown">
 
-             <summary>
 
-             Requests the Shutdown.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.JobRunShell.Run">
 
-             <summary>
 
-             This method has to be implemented in order that starting of the thread causes the object's
 
-             run method to be called in that separately executing thread.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.JobRunShell.Begin">
 
-             <summary>
 
-             Runs begin procedures on this instance.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.JobRunShell.Complete(System.Boolean)">
 
-             <summary>
 
-             Completes the execution.
 
-             </summary>
 
-             <param name="successfulExecution">if set to <c>true</c> [successful execution].</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.JobRunShell.Passivate">
 
-             <summary>
 
-             Passivates this instance.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Core.ListenerManagerImpl">
 
-             <summary>
 
-             Default concrete implementation of <see cref="T:Quartz.IListenerManager"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.IListenerManager">
 
-             <summary>
 
-             Client programs may be interested in the 'listener' interfaces that are
 
-             available from Quartz. The <see cref="T:Quartz.IJobListener"/> interface
 
-             provides notifications of Job executions. The
 
-             <see cref="T:Quartz.ITriggerListener"/> interface provides notifications of
 
-             <see cref="T:Quartz.ITrigger"/> firings. The <see cref="T:Quartz.ISchedulerListener"/>
 
-             interface provides notifications of scheduler events and
 
-             errors.  Listeners can be associated with local schedulers through the
 
-             <see cref="T:Quartz.IListenerManager"/> interface.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <author>jhouse</author>
 
-             <since>2.0 - previously listeners were managed directly on the Scheduler interface.</since>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.AddJobListener(Quartz.IJobListener,Quartz.IMatcher{Quartz.JobKey}[])">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.IJobListener"/> to the<see cref="T:Quartz.IScheduler"/>,
 
-             and register it to receive events for Jobs that are matched by ANY of the
 
-             given Matchers.
 
-             </summary>
 
-             <remarks>
 
-             If no matchers are provided, the <see cref="T:Quartz.Impl.Matchers.EverythingMatcher`1"/> will be used.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IMatcher`1"/>
 
-             <seealso cref="T:Quartz.Impl.Matchers.EverythingMatcher`1"/>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.AddJobListener(Quartz.IJobListener,System.Collections.Generic.IList{Quartz.IMatcher{Quartz.JobKey}})">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.IJobListener"/> to the<see cref="T:Quartz.IScheduler"/>,
 
-             and register it to receive events for Jobs that are matched by ANY of the
 
-             given Matchers.
 
-             </summary>
 
-             <remarks>
 
-             If no matchers are provided, the <see cref="T:Quartz.Impl.Matchers.EverythingMatcher`1"/> will be used.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IMatcher`1"/>
 
-             <seealso cref="T:Quartz.Impl.Matchers.EverythingMatcher`1"/>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.AddJobListenerMatcher(System.String,Quartz.IMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Add the given Matcher to the set of matchers for which the listener
 
-             will receive events if ANY of the matchers match.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="listenerName">the name of the listener to add the matcher to</param>
 
-             <param name="matcher">the additional matcher to apply for selecting events</param>
 
-             <returns>true if the identified listener was found and updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.RemoveJobListenerMatcher(System.String,Quartz.IMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Remove the given Matcher to the set of matchers for which the listener
 
-             will receive events if ANY of the matchers match.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="listenerName">the name of the listener to add the matcher to</param>
 
-             <param name="matcher">the additional matcher to apply for selecting events</param>
 
-             <returns>true if the given matcher was found and removed from the listener's list of matchers</returns>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.SetJobListenerMatchers(System.String,System.Collections.Generic.IList{Quartz.IMatcher{Quartz.JobKey}})">
 
-             <summary>
 
-             Set the set of Matchers for which the listener
 
-             will receive events if ANY of the matchers match.
 
-             </summary>
 
-             <remarks>
 
-             <para>Removes any existing matchers for the identified listener!</para>
 
-             </remarks>
 
-             <param name="listenerName">the name of the listener to add the matcher to</param>
 
-             <param name="matchers">the matchers to apply for selecting events</param>
 
-             <returns>true if the given matcher was found and removed from the listener's list of matchers</returns>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.GetJobListenerMatchers(System.String)">
 
-             <summary>
 
-             Get the set of Matchers for which the listener
 
-             will receive events if ANY of the matchers match.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="listenerName">the name of the listener to add the matcher to</param>
 
-             <returns>the matchers registered for selecting events for the identified listener</returns>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.RemoveJobListener(System.String)">
 
-             <summary>
 
-             Remove the identified <see cref="T:Quartz.IJobListener"/> from the<see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>true if the identified listener was found in the list, and removed.</returns>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.GetJobListeners">
 
-             <summary>
 
-             Get a List containing all of the <see cref="T:Quartz.IJobListener"/>s in
 
-             the<see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.GetJobListener(System.String)">
 
-             <summary>
 
-             Get the <see cref="T:Quartz.IJobListener"/> that has the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.AddTriggerListener(Quartz.ITriggerListener,Quartz.IMatcher{Quartz.TriggerKey}[])">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.ITriggerListener"/> to the<see cref="T:Quartz.IScheduler"/>,
 
-             and register it to receive events for Triggers that are matched by ANY of the
 
-             given Matchers.
 
-             </summary>
 
-             <remarks>
 
-             If no matcher is provided, the <see cref="T:Quartz.Impl.Matchers.EverythingMatcher`1"/> will be used.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IMatcher`1"/>
 
-             <seealso cref="T:Quartz.Impl.Matchers.EverythingMatcher`1"/>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.AddTriggerListener(Quartz.ITriggerListener,System.Collections.Generic.IList{Quartz.IMatcher{Quartz.TriggerKey}})">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.ITriggerListener"/> to the<see cref="T:Quartz.IScheduler"/>,
 
-             and register it to receive events for Triggers that are matched by ANY of the
 
-             given Matchers.
 
-             </summary>
 
-             <remarks>
 
-             If no matcher is provided, the <see cref="T:Quartz.Impl.Matchers.EverythingMatcher`1"/> will be used.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IMatcher`1"/>
 
-             <seealso cref="T:Quartz.Impl.Matchers.EverythingMatcher`1"/>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.AddTriggerListenerMatcher(System.String,Quartz.IMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Add the given Matcher to the set of matchers for which the listener
 
-             will receive events if ANY of the matchers match.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="listenerName">the name of the listener to add the matcher to</param>
 
-             <param name="matcher">the additional matcher to apply for selecting events</param>
 
-             <returns>true if the identified listener was found and updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.RemoveTriggerListenerMatcher(System.String,Quartz.IMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Remove the given Matcher to the set of matchers for which the listener
 
-             will receive events if ANY of the matchers match.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="listenerName">the name of the listener to add the matcher to</param>
 
-             <param name="matcher">the additional matcher to apply for selecting events</param>
 
-             <returns>true if the given matcher was found and removed from the listener's list of matchers</returns>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.SetTriggerListenerMatchers(System.String,System.Collections.Generic.IList{Quartz.IMatcher{Quartz.TriggerKey}})">
 
-             <summary>
 
-             Set the set of Matchers for which the listener
 
-             will receive events if ANY of the matchers match.
 
-             </summary>
 
-             <remarks>
 
-             <para>Removes any existing matchers for the identified listener!</para>
 
-             </remarks>
 
-             <param name="listenerName">the name of the listener to add the matcher to</param>
 
-             <param name="matchers">the matchers to apply for selecting events</param>
 
-             <returns>true if the given matcher was found and removed from the listener's list of matchers</returns>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.GetTriggerListenerMatchers(System.String)">
 
-             <summary>
 
-             Get the set of Matchers for which the listener
 
-             will receive events if ANY of the matchers match.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="listenerName">the name of the listener to add the matcher to</param>
 
-             <returns>the matchers registered for selecting events for the identified listener</returns>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.RemoveTriggerListener(System.String)">
 
-             <summary>
 
-             Remove the identified <see cref="T:Quartz.ITriggerListener"/> from the<see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>true if the identified listener was found in the list, and</returns>
 
-             removed.
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.GetTriggerListeners">
 
-             <summary>
 
-             Get a List containing all of the <see cref="T:Quartz.ITriggerListener"/>s
 
-             in the<see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.GetTriggerListener(System.String)">
 
-             <summary>
 
-             Get the <see cref="T:Quartz.ITriggerListener"/> that has the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.AddSchedulerListener(Quartz.ISchedulerListener)">
 
-              <summary>
 
-              Register the given <see cref="T:Quartz.ISchedulerListener"/> with the
 
-             <see cref="T:Quartz.IScheduler"/>.
 
-              </summary>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.RemoveSchedulerListener(Quartz.ISchedulerListener)">
 
-              <summary>
 
-              Remove the given <see cref="T:Quartz.ISchedulerListener"/> from the
 
-             <see cref="T:Quartz.IScheduler"/>.
 
-              </summary>
 
-              <remarks>
 
-              </remarks>
 
-              <returns>true if the identified listener was found in the list, and removed.</returns>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.GetSchedulerListeners">
 
-             <summary>
 
-             Get a List containing all of the <see cref="T:Quartz.ISchedulerListener"/>s
 
-             registered with the<see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Core.QuartzScheduler">
 
-             <summary>
 
-             This is the heart of Quartz, an indirect implementation of the <see cref="T:Quartz.IScheduler"/>
 
-             interface, containing methods to schedule <see cref="T:Quartz.IJob"/>s,
 
-             register <see cref="T:Quartz.IJobListener"/> instances, etc.
 
-             </summary>
 
-             <seealso cref="T:Quartz.IScheduler"/>
 
-             <seealso cref="T:Quartz.Core.QuartzSchedulerThread"/>
 
-             <seealso cref="T:Quartz.Spi.IJobStore"/>
 
-             <seealso cref="T:Quartz.Spi.IThreadPool"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.IRemotableQuartzScheduler">
 
-             <summary>
 
-             Remote scheduler service interface.
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.IRemotableQuartzScheduler.Start">
 
-             <summary>
 
-             Starts this instance.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.IRemotableQuartzScheduler.Standby">
 
-             <summary>
 
-             Standbies this instance.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.IRemotableQuartzScheduler.Shutdown">
 
-             <summary>
 
-             Shutdowns this instance.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.IRemotableQuartzScheduler.IsJobGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given JobGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.IRemotableQuartzScheduler.IsTriggerGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given TriggerGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.#cctor">
 
-             <summary>
 
-             Initializes the <see cref="T:Quartz.Core.QuartzScheduler"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.AddInternalSchedulerListener(Quartz.ISchedulerListener)">
 
-             <summary>
 
-             Register the given <see cref="T:Quartz.ISchedulerListener"/> with the
 
-             <see cref="T:Quartz.IScheduler"/>'s list of internal listeners.
 
-             </summary>
 
-             <param name="schedulerListener"></param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.RemoveInternalSchedulerListener(Quartz.ISchedulerListener)">
 
-             <summary>
 
-             Remove the given <see cref="T:Quartz.ISchedulerListener"/> from the
 
-             <see cref="T:Quartz.IScheduler"/>'s list of internal listeners.
 
-             </summary>
 
-             <param name="schedulerListener"></param>
 
-             <returns>true if the identified listener was found in the list, andremoved.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.#ctor(Quartz.Core.QuartzSchedulerResources,System.TimeSpan)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Core.QuartzScheduler"/> with the given configuration
 
-             properties.
 
-             </summary>
 
-             <seealso cref="T:Quartz.Core.QuartzSchedulerResources"/>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.Bind">
 
-             <summary>
 
-             Bind the scheduler to remoting infrastructure.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.UnBind">
 
-             <summary>
 
-             Un-bind the scheduler from remoting infrastructure.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.AddNoGCObject(System.Object)">
 
-             <summary>
 
-             Adds an object that should be kept as reference to prevent
 
-             it from being garbage collected.
 
-             </summary>
 
-             <param name="obj">The obj.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.RemoveNoGCObject(System.Object)">
 
-             <summary>
 
-             Removes the object from garbae collection protected list.
 
-             </summary>
 
-             <param name="obj">The obj.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.Start">
 
-             <summary>
 
-             Starts the <see cref="T:Quartz.Core.QuartzScheduler"/>'s threads that fire <see cref="T:Quartz.ITrigger"/>s.
 
-             <para>
 
-             All <see cref="T:Quartz.ITrigger"/>s that have misfired will
 
-             be passed to the appropriate TriggerListener(s).
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.Standby">
 
-             <summary>
 
-             Temporarily halts the <see cref="T:Quartz.Core.QuartzScheduler"/>'s firing of <see cref="T:Quartz.ITrigger"/>s.
 
-             <para>
 
-             The scheduler is not destroyed, and can be re-started at any time.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.Shutdown">
 
-             <summary>
 
-             Halts the <see cref="T:Quartz.Core.QuartzScheduler"/>'s firing of <see cref="T:Quartz.ITrigger"/>s,
 
-             and cleans up all resources associated with the QuartzScheduler.
 
-             Equivalent to <see cref="M:Quartz.Core.QuartzScheduler.Shutdown(System.Boolean)"/>.
 
-             <para>
 
-             The scheduler cannot be re-started.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.Shutdown(System.Boolean)">
 
-             <summary>
 
-             Halts the <see cref="T:Quartz.Core.QuartzScheduler"/>'s firing of <see cref="T:Quartz.ITrigger"/>s,
 
-             and cleans up all resources associated with the QuartzScheduler.
 
-             <para>
 
-             The scheduler cannot be re-started.
 
-             </para>
 
-             </summary>
 
-             <param name="waitForJobsToComplete">
 
-             if <see langword="true"/> the scheduler will not allow this method
 
-             to return until all currently executing jobs have completed.
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.ValidateState">
 
-             <summary>
 
-             Validates the state.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.ScheduleJob(Quartz.IJobDetail,Quartz.ITrigger)">
 
-             <summary> 
 
-             Add the <see cref="T:Quartz.IJob"/> identified by the given
 
-             <see cref="T:Quartz.IJobDetail"/> to the Scheduler, and
 
-             associate the given <see cref="T:Quartz.ITrigger"/> with it.
 
-             <para>
 
-             If the given Trigger does not reference any <see cref="T:Quartz.IJob"/>, then it
 
-             will be set to reference the Job passed with it into this method.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.ScheduleJob(Quartz.ITrigger)">
 
-             <summary>
 
-             Schedule the given <see cref="T:Quartz.ITrigger"/> with the
 
-             <see cref="T:Quartz.IJob"/> identified by the <see cref="T:Quartz.ITrigger"/>'s settings.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.AddJob(Quartz.IJobDetail,System.Boolean)">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.IJob"/> to the Scheduler - with no associated
 
-             <see cref="T:Quartz.ITrigger"/>. The <see cref="T:Quartz.IJob"/> will be 'dormant' until
 
-             it is scheduled with a <see cref="T:Quartz.ITrigger"/>, or <see cref="M:Quartz.IScheduler.TriggerJob(Quartz.JobKey)"/>
 
-             is called for it.
 
-             <para>
 
-             The <see cref="T:Quartz.IJob"/> must by definition be 'durable', if it is not,
 
-             SchedulerException will be thrown.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.DeleteJob(Quartz.JobKey)">
 
-             <summary>
 
-             Delete the identified <see cref="T:Quartz.IJob"/> from the Scheduler - and any
 
-             associated <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-             <returns> true if the Job was found and deleted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.UnscheduleJob(Quartz.TriggerKey)">
 
-             <summary>
 
-             Remove the indicated <see cref="T:Quartz.ITrigger"/> from the
 
-             scheduler.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.RescheduleJob(Quartz.TriggerKey,Quartz.ITrigger)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.ITrigger"/> with the
 
-             given name, and store the new given one - which must be associated
 
-             with the same job.
 
-             </summary>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <param name="newTrigger">The new <see cref="T:Quartz.ITrigger"/> to be stored.</param>
 
-             <returns>
 
-             	<see langword="null"/> if a <see cref="T:Quartz.ITrigger"/> with the given
 
-             name and group was not found and removed from the store, otherwise
 
-             the first fire time of the newly scheduled trigger.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NextLong(System.Random)">
 
-             <summary>
 
-             Creates a new positive random number 
 
-             </summary>
 
-             <param name="random">The last random obtained</param>
 
-             <returns>Returns a new positive random number</returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.TriggerJob(Quartz.JobKey,Quartz.JobDataMap)">
 
-             <summary>
 
-             Trigger the identified <see cref="T:Quartz.IJob"/> (Execute it now) - with a non-volatile trigger.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.TriggerJob(Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Store and schedule the identified <see cref="T:Quartz.Spi.IOperableTrigger"/>
 
-             </summary>
 
-             <param name="trig"></param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.PauseTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Pause the <see cref="T:Quartz.ITrigger"/> with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.ITrigger"/>s in the given group.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.PauseJob(Quartz.JobKey)">
 
-             <summary> 
 
-             Pause the <see cref="T:Quartz.IJobDetail"/> with the given
 
-             name - by pausing all of its current <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.PauseJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.IJobDetail"/>s in the
 
-             given group - by pausing all of their <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.ResumeTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Resume (un-pause) the <see cref="T:Quartz.ITrigger"/> with the given
 
-             name.
 
-             <para>
 
-             If the <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Resume (un-pause) all of the <see cref="T:Quartz.ITrigger"/>s in the
 
-             matching groups.
 
-             <para>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetPausedTriggerGroups">
 
-             <summary>
 
-             Gets the paused trigger groups.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.ResumeJob(Quartz.JobKey)">
 
-             <summary>
 
-             Resume (un-pause) the <see cref="T:Quartz.IJobDetail"/> with
 
-             the given name.
 
-             <para>
 
-             If any of the <see cref="T:Quartz.IJob"/>'s<see cref="T:Quartz.ITrigger"/> s missed one
 
-             or more fire-times, then the <see cref="T:Quartz.ITrigger"/>'s misfire
 
-             instruction will be applied.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.ResumeJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Resume (un-pause) all of the <see cref="T:Quartz.IJobDetail"/>s
 
-             in the matching groups.
 
-             <para>
 
-             If any of the <see cref="T:Quartz.IJob"/> s had <see cref="T:Quartz.ITrigger"/> s that
 
-             missed one or more fire-times, then the <see cref="T:Quartz.ITrigger"/>'s
 
-             misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.PauseAll">
 
-             <summary>
 
-             Pause all triggers - equivalent of calling <see cref="M:Quartz.Core.QuartzScheduler.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             with a matcher matching all known groups.
 
-             <para>
 
-             When <see cref="M:Quartz.Core.QuartzScheduler.ResumeAll"/> is called (to un-pause), trigger misfire
 
-             instructions WILL be applied.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="M:Quartz.Core.QuartzScheduler.ResumeAll"/>
 
-             <seealso cref="M:Quartz.Core.QuartzScheduler.PauseJob(Quartz.JobKey)"/>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.ResumeAll">
 
-             <summary>
 
-             Resume (un-pause) all triggers - equivalent of calling <see cref="M:Quartz.Core.QuartzScheduler.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             on every group.
 
-             <para>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="M:Quartz.Core.QuartzScheduler.PauseAll"/>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetJobGroupNames">
 
-             <summary>
 
-             Get the names of all known <see cref="T:Quartz.IJob"/> groups.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetJobKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Get the names of all the <see cref="T:Quartz.IJob"/>s in the
 
-             given group.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetTriggersOfJob(Quartz.JobKey)">
 
-             <summary> 
 
-             Get all <see cref="T:Quartz.ITrigger"/> s that are associated with the
 
-             identified <see cref="T:Quartz.IJobDetail"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetTriggerGroupNames">
 
-             <summary>
 
-             Get the names of all known <see cref="T:Quartz.ITrigger"/>
 
-             groups.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetTriggerKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Get the names of all the <see cref="T:Quartz.ITrigger"/>s in
 
-             the matching groups.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetJobDetail(Quartz.JobKey)">
 
-             <summary> 
 
-             Get the <see cref="T:Quartz.IJobDetail"/> for the <see cref="T:Quartz.IJob"/>
 
-             instance with the given name and group.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Get the <see cref="T:Quartz.ITrigger"/> instance with the given name and
 
-             group.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.CheckExists(Quartz.JobKey)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.IJob"/> with the given identifier already
 
-             exists within the scheduler.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="jobKey">the identifier to check for</param>
 
-             <returns>true if a Job exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.CheckExists(Quartz.TriggerKey)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.ITrigger"/> with the given identifier already
 
-             exists within the scheduler.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="triggerKey">the identifier to check for</param>
 
-             <returns>true if a Trigger exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.Clear">
 
-             <summary>
 
-             Clears (deletes!) all scheduling data - all <see cref="T:Quartz.IJob"/>s, <see cref="T:Quartz.ITrigger"/>s
 
-             <see cref="T:Quartz.ICalendar"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetTriggerState(Quartz.TriggerKey)">
 
-             <summary>
 
-             Get the current state of the identified <see cref="T:Quartz.ITrigger"/>.  
 
-             </summary>
 
-             <seealso cref="T:Quartz.TriggerState"/>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.AddCalendar(System.String,Quartz.ICalendar,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Add (register) the given <see cref="T:Quartz.ICalendar"/> to the Scheduler.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.DeleteCalendar(System.String)">
 
-             <summary>
 
-             Delete the identified <see cref="T:Quartz.ICalendar"/> from the Scheduler.
 
-             </summary>
 
-             <returns> true if the Calendar was found and deleted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetCalendar(System.String)">
 
-             <summary> 
 
-             Get the <see cref="T:Quartz.ICalendar"/> instance with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetCalendarNames">
 
-             <summary>
 
-             Get the names of all registered <see cref="T:Quartz.ICalendar"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.AddInternalJobListener(Quartz.IJobListener)">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.IJobListener"/> to the
 
-             <see cref="T:Quartz.IScheduler"/>'s <i>internal</i> list.
 
-             </summary>
 
-             <param name="jobListener"></param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.RemoveInternalJobListener(System.String)">
 
-             <summary>
 
-             Remove the identified <see cref="T:Quartz.IJobListener"/> from the <see cref="T:Quartz.IScheduler"/>'s
 
-             list of <i>internal</i> listeners.
 
-             </summary>
 
-             <param name="name"></param>
 
-             <returns>true if the identified listener was found in the list, and removed.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetInternalJobListener(System.String)">
 
-             <summary>
 
-             Get the <i>internal</i> <see cref="T:Quartz.IJobListener"/>
 
-             that has the given name.
 
-             </summary>
 
-             <param name="name"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.AddInternalTriggerListener(Quartz.ITriggerListener)">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.ITriggerListener"/> to the
 
-             <see cref="T:Quartz.IScheduler"/>'s <i>internal</i> list.
 
-             </summary>
 
-             <param name="triggerListener"></param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.RemoveinternalTriggerListener(System.String)">
 
-             <summary>
 
-             Remove the identified <see cref="T:Quartz.ITriggerListener"/> from the <see cref="T:Quartz.IScheduler"/>'s
 
-             list of <i>internal</i> listeners.
 
-             </summary>
 
-             <param name="name"></param>
 
-             <returns>true if the identified listener was found in the list, and removed.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetInternalTriggerListener(System.String)">
 
-             <summary>
 
-             Get the <i>internal</i> <see cref="T:Quartz.ITriggerListener"/> that
 
-             has the given name.
 
-             </summary>
 
-             <param name="name"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifyJobStoreJobComplete(Quartz.Spi.IOperableTrigger,Quartz.IJobDetail,Quartz.SchedulerInstruction)">
 
-             <summary>
 
-             Notifies the job store job complete.
 
-             </summary>
 
-             <param name="trigger">The trigger.</param>
 
-             <param name="detail">The detail.</param>
 
-             <param name="instCode">The instruction code.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerThread(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Notifies the scheduler thread.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifyTriggerListenersFired(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Notifies the trigger listeners about fired trigger.
 
-             </summary>
 
-             <param name="jec">The job execution context.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifyTriggerListenersMisfired(Quartz.ITrigger)">
 
-             <summary>
 
-             Notifies the trigger listeners about misfired trigger.
 
-             </summary>
 
-             <param name="trigger">The trigger.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifyTriggerListenersComplete(Quartz.IJobExecutionContext,Quartz.SchedulerInstruction)">
 
-             <summary>
 
-             Notifies the trigger listeners of completion.
 
-             </summary>
 
-             <param name="jec">The job executution context.</param>
 
-             <param name="instCode">The instruction code to report to triggers.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifyJobListenersToBeExecuted(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Notifies the job listeners about job to be executed.
 
-             </summary>
 
-             <param name="jec">The jec.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifyJobListenersWasVetoed(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Notifies the job listeners that job exucution was vetoed.
 
-             </summary>
 
-             <param name="jec">The job execution context.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifyJobListenersWasExecuted(Quartz.IJobExecutionContext,Quartz.JobExecutionException)">
 
-             <summary>
 
-             Notifies the job listeners that job was executed.
 
-             </summary>
 
-             <param name="jec">The jec.</param>
 
-             <param name="je">The je.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersError(System.String,Quartz.SchedulerException)">
 
-             <summary>
 
-             Notifies the scheduler listeners about scheduler error.
 
-             </summary>
 
-             <param name="msg">The MSG.</param>
 
-             <param name="se">The se.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersScheduled(Quartz.ITrigger)">
 
-             <summary>
 
-             Notifies the scheduler listeners about job that was scheduled.
 
-             </summary>
 
-             <param name="trigger">The trigger.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersUnscheduled(Quartz.TriggerKey)">
 
-             <summary>
 
-             Notifies the scheduler listeners about job that was unscheduled.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersFinalized(Quartz.ITrigger)">
 
-             <summary>
 
-             Notifies the scheduler listeners about finalized trigger.
 
-             </summary>
 
-             <param name="trigger">The trigger.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersPausedTriggers(System.String)">
 
-             <summary>
 
-             Notifies the scheduler listeners about paused trigger.
 
-             </summary>
 
-             <param name="group">The group.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersPausedTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Notifies the scheduler listeners about paused trigger.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersResumedTriggers(System.String)">
 
-             <summary>
 
-             Notifies the scheduler listeners resumed trigger.
 
-             </summary>
 
-             <param name="group">The group.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersResumedTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Notifies the scheduler listeners resumed trigger.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersPausedJob(Quartz.JobKey)">
 
-             <summary>
 
-             Notifies the scheduler listeners about paused job.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersPausedJobs(System.String)">
 
-             <summary>
 
-             Notifies the scheduler listeners about paused job.
 
-             </summary>
 
-             <param name="group">The group.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersResumedJob(Quartz.JobKey)">
 
-             <summary>
 
-             Notifies the scheduler listeners about resumed job.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersResumedJobs(System.String)">
 
-             <summary>
 
-             Notifies the scheduler listeners about resumed job.
 
-             </summary>
 
-             <param name="group">The group.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersShutdown">
 
-             <summary>
 
-             Notifies the scheduler listeners about scheduler shutdown.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.Interrupt(Quartz.JobKey)">
 
-             <summary>
 
-             Interrupt all instances of the identified InterruptableJob.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.Interrupt(System.String)">
 
-             <summary>
 
-             Interrupt all instances of the identified InterruptableJob executing in this Scheduler instance.
 
-             </summary>
 
-             <remarks>
 
-             This method is not cluster aware.  That is, it will only interrupt 
 
-             instances of the identified InterruptableJob currently executing in this 
 
-             Scheduler instance, not across the entire cluster.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.Simpl.IRemotableQuartzScheduler.Interrupt(Quartz.JobKey)"/>
 
-             <param name="fireInstanceId"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.InitializeLifetimeService">
 
-             <summary>
 
-             Obtains a lifetime service object to control the lifetime policy for this instance.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.Version">
 
-             <summary>
 
-             Gets the version of the Quartz Scheduler.
 
-             </summary>
 
-             <value>The version.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.VersionMajor">
 
-             <summary>
 
-             Gets the version major.
 
-             </summary>
 
-             <value>The version major.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.VersionMinor">
 
-             <summary>
 
-             Gets the version minor.
 
-             </summary>
 
-             <value>The version minor.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.VersionIteration">
 
-             <summary>
 
-             Gets the version iteration.
 
-             </summary>
 
-             <value>The version iteration.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.SchedulerSignaler">
 
-             <summary>
 
-             Gets the scheduler signaler.
 
-             </summary>
 
-             <value>The scheduler signaler.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.SchedulerName">
 
-             <summary>
 
-             Returns the name of the <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.SchedulerInstanceId">
 
-             <summary> 
 
-             Returns the instance Id of the <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.SchedulerContext">
 
-             <summary>
 
-             Returns the <see cref="P:Quartz.Core.QuartzScheduler.SchedulerContext"/> of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.SignalOnSchedulingChange">
 
-             <summary>
 
-             Gets or sets a value indicating whether to signal on scheduling change.
 
-             </summary>
 
-             <value>
 
-             	<c>true</c> if schduler should signal on scheduling change; otherwise, <c>false</c>.
 
-             </value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.InStandbyMode">
 
-             <summary>
 
-             Reports whether the <see cref="T:Quartz.IScheduler"/> is paused.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.JobStoreClass">
 
-             <summary>
 
-             Gets the job store class.
 
-             </summary>
 
-             <value>The job store class.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.ThreadPoolClass">
 
-             <summary>
 
-             Gets the thread pool class.
 
-             </summary>
 
-             <value>The thread pool class.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.ThreadPoolSize">
 
-             <summary>
 
-             Gets the size of the thread pool.
 
-             </summary>
 
-             <value>The size of the thread pool.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.IsShutdown">
 
-             <summary>
 
-             Reports whether the <see cref="T:Quartz.IScheduler"/> has been Shutdown.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.CurrentlyExecutingJobs">
 
-             <summary>
 
-             Return a list of <see cref="T:Quartz.IJobExecutionContext"/> objects that
 
-             represent all currently executing Jobs in this Scheduler instance.
 
-             <para>
 
-             This method is not cluster aware.  That is, it will only return Jobs
 
-             currently executing in this Scheduler instance, not across the entire
 
-             cluster.
 
-             </para>
 
-             <para>
 
-             Note that the list returned is an 'instantaneous' snap-shot, and that as
 
-             soon as it's returned, the true list of executing jobs may be different.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.InternalSchedulerListeners">
 
-             <summary>
 
-             Get a List containing all of the <i>internal</i> <see cref="T:Quartz.ISchedulerListener"/>s
 
-             registered with the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.JobFactory">
 
-             <summary>
 
-             Gets or sets the job factory.
 
-             </summary>
 
-             <value>The job factory.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.RunningSince">
 
-             <summary>
 
-             Gets the running since.
 
-             </summary>
 
-             <value>The running since.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.NumJobsExecuted">
 
-             <summary>
 
-             Gets the number of jobs executed.
 
-             </summary>
 
-             <value>The number of jobs executed.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.SupportsPersistence">
 
-             <summary>
 
-             Gets a value indicating whether this scheduler supports persistence.
 
-             </summary>
 
-             <value><c>true</c> if supports persistence; otherwise, <c>false</c>.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.InternalJobListeners">
 
-             <summary>
 
-             Get a List containing all of the <see cref="T:Quartz.IJobListener"/>s
 
-             in the <see cref="T:Quartz.IScheduler"/>'s <i>internal</i> list.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.InternalTriggerListeners">
 
-             <summary>
 
-             Get a list containing all of the <see cref="T:Quartz.ITriggerListener"/>s
 
-             in the <see cref="T:Quartz.IScheduler"/>'s <i>internal</i> list.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Core.QuartzScheduler.DelayedSchedulerStarter">
 
-             <summary>
 
-             Helper class to start scheduler in a delayed fashion.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Core.ErrorLogger">
 
-             <summary>
 
-             ErrorLogger - Scheduler Listener Class
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.IJobListener">
 
-             <summary>
 
-             The interface to be implemented by classes that want to be informed when a
 
-             <see cref="T:Quartz.IJobDetail"/> executes. In general,  applications that use a 
 
-             <see cref="T:Quartz.IScheduler"/> will not have use for this mechanism.
 
-             </summary>
 
-             <seealso cref="M:Quartz.IListenerManager.AddJobListener(Quartz.IJobListener,System.Collections.Generic.IList{Quartz.IMatcher{Quartz.JobKey}})"/>
 
-             <seealso cref="T:Quartz.IMatcher`1"/>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.IJobExecutionContext"/>
 
-             <seealso cref="T:Quartz.JobExecutionException"/>
 
-             <seealso cref="T:Quartz.ITriggerListener"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.IJobListener.JobToBeExecuted(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             is about to be executed (an associated <see cref="T:Quartz.ITrigger"/>
 
-             has occurred).
 
-             <para>
 
-             This method will not be invoked if the execution of the Job was vetoed
 
-             by a <see cref="T:Quartz.ITriggerListener"/>.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="M:Quartz.IJobListener.JobExecutionVetoed(Quartz.IJobExecutionContext)"/>
 
-         </member>
 
-         <member name="M:Quartz.IJobListener.JobExecutionVetoed(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             was about to be executed (an associated <see cref="T:Quartz.ITrigger"/>
 
-             has occurred), but a <see cref="T:Quartz.ITriggerListener"/> vetoed it's 
 
-             execution.
 
-             </summary>
 
-             <seealso cref="M:Quartz.IJobListener.JobToBeExecuted(Quartz.IJobExecutionContext)"/>
 
-         </member>
 
-         <member name="M:Quartz.IJobListener.JobWasExecuted(Quartz.IJobExecutionContext,Quartz.JobExecutionException)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> after a <see cref="T:Quartz.IJobDetail"/>
 
-             has been executed, and be for the associated <see cref="T:Quartz.Spi.IOperableTrigger"/>'s
 
-             <see cref="M:Quartz.Spi.IOperableTrigger.Triggered(Quartz.ICalendar)"/> method has been called.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobListener.Name">
 
-             <summary>
 
-             Get the name of the <see cref="T:Quartz.IJobListener"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Core.QuartzSchedulerResources">
 
-             <summary>
 
-             Contains all of the resources (<see cref="T:Quartz.Spi.IJobStore"/>,<see cref="T:Quartz.Spi.IThreadPool"/>,
 
-             etc.) necessary to create a <see cref="T:Quartz.Core.QuartzScheduler"/> instance.
 
-             </summary>
 
-             <seealso cref="T:Quartz.Core.QuartzScheduler"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzSchedulerResources.GetUniqueIdentifier(System.String,System.String)">
 
-             <summary>
 
-             Gets the unique identifier.
 
-             </summary>
 
-             <param name="schedName">Name of the scheduler.</param>
 
-             <param name="schedInstId">The scheduler instance id.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzSchedulerResources.GetUniqueIdentifier">
 
-             <summary>
 
-             Gets the unique identifier.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzSchedulerResources.AddSchedulerPlugin(Quartz.Spi.ISchedulerPlugin)">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.Spi.ISchedulerPlugin"/> for the 
 
-             <see cref="T:Quartz.Core.QuartzScheduler"/> to use. This method expects the plugin's
 
-             "initialize" method to be invoked externally (either before or after
 
-             this method is called).
 
-             </summary>
 
-             <param name="plugin"></param>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.Name">
 
-             <summary>
 
-             Get or set the name for the <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException">
 
-             if name is null or empty.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.InstanceId">
 
-             <summary>
 
-             Get or set the instance Id for the <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException"> 
 
-             if name is null or empty.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.ThreadName">
 
-             <summary>
 
-             Get or set the name for the <see cref="T:Quartz.Core.QuartzSchedulerThread"/>.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException"> 
 
-             if name is null or empty.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.ThreadPool">
 
-             <summary>
 
-             Get or set the <see cref="P:Quartz.Core.QuartzSchedulerResources.ThreadPool"/> for the <see cref="T:Quartz.Core.QuartzScheduler"/>
 
-             to use.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException"> 
 
-             if threadPool is null.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.JobStore">
 
-             <summary>
 
-             Get or set the <see cref="T:Quartz.Spi.IJobStore"/> for the <see cref="T:Quartz.Core.QuartzScheduler"/>
 
-             to use.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException"> 
 
-             if jobStore is null.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.JobRunShellFactory">
 
-             <summary> 
 
-             Get or set the <see cref="P:Quartz.Core.QuartzSchedulerResources.JobRunShellFactory"/> for the <see cref="T:Quartz.Core.QuartzScheduler"/>
 
-             to use.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException"> 
 
-             if jobRunShellFactory is null.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.SchedulerPlugins">
 
-             <summary>
 
-             Get the <see cref="T:System.Collections.Generic.IList`1"/> of all  <see cref="T:Quartz.Spi.ISchedulerPlugin"/>s for the 
 
-             <see cref="T:Quartz.Core.QuartzScheduler"/> to use.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.MakeSchedulerThreadDaemon">
 
-             <summary>
 
-             Gets or sets a value indicating whether to make scheduler thread daemon.
 
-             </summary>
 
-             <value>
 
-             	<c>true</c> if scheduler should be thread daemon; otherwise, <c>false</c>.
 
-             </value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.SchedulerExporter">
 
-             <summary>
 
-             Gets or sets the scheduler exporter.
 
-             </summary>
 
-             <value>The scheduler exporter.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.ThreadExecutor">
 
-             <summary>
 
-             The ThreadExecutor which runs the QuartzSchedulerThread.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.BatchTimeWindow">
 
-             <summary>
 
-             Gets or sets the batch time window.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Core.QuartzSchedulerThread">
 
-             <summary>
 
-             The thread responsible for performing the work of firing <see cref="T:Quartz.ITrigger"/>
 
-             s that are registered with the <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-             <seealso cref="T:Quartz.Core.QuartzScheduler"/>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.QuartzThread">
 
-             <summary>
 
-             Support class used to handle threads
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.QuartzThread.thread">
 
-             <summary>
 
-             The instance of System.Threading.Thread
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.QuartzThread.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the QuartzThread class
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.QuartzThread.#ctor(System.String)">
 
-             <summary>
 
-             Initializes a new instance of the Thread class.
 
-             </summary>
 
-             <param name="name">The name of the thread</param>
 
-         </member>
 
-         <member name="M:Quartz.QuartzThread.Run">
 
-             <summary>
 
-             This method has no functionality unless the method is overridden
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.QuartzThread.Start">
 
-             <summary>
 
-             Causes the operating system to change the state of the current thread instance to ThreadState.Running
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.QuartzThread.Interrupt">
 
-             <summary>
 
-             Interrupts a thread that is in the WaitSleepJoin thread state
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.QuartzThread.Join">
 
-             <summary>
 
-             Blocks the calling thread until a thread terminates
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.QuartzThread.ToString">
 
-             <summary>
 
-             Obtain a string that represents the current object
 
-             </summary>
 
-             <returns>A string that represents the current object</returns>
 
-         </member>
 
-         <member name="P:Quartz.QuartzThread.Name">
 
-             <summary>
 
-             Gets or sets the name of the thread
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.QuartzThread.Priority">
 
-             <summary>
 
-             Gets or sets a value indicating the scheduling priority of a thread
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.QuartzThread.IsBackground">
 
-             <summary>
 
-             Gets or sets a value indicating whether or not a thread is a background thread.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzSchedulerThread.GetRandomizedIdleWaitTime">
 
-             <summary>
 
-             Gets the randomized idle wait time.
 
-             </summary>
 
-             <value>The randomized idle wait time.</value>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzSchedulerThread.#ctor(Quartz.Core.QuartzScheduler,Quartz.Core.QuartzSchedulerResources)">
 
-             <summary>
 
-             Construct a new <see cref="T:Quartz.Core.QuartzSchedulerThread"/> for the given
 
-             <see cref="T:Quartz.Core.QuartzScheduler"/> as a non-daemon <see cref="T:System.Threading.Thread"/>
 
-             with normal priority.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzSchedulerThread.#ctor(Quartz.Core.QuartzScheduler,Quartz.Core.QuartzSchedulerResources,System.Boolean,System.Int32)">
 
-             <summary>
 
-             Construct a new <see cref="T:Quartz.Core.QuartzSchedulerThread"/> for the given
 
-             <see cref="T:Quartz.Core.QuartzScheduler"/> as a <see cref="T:System.Threading.Thread"/> with the given
 
-             attributes.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzSchedulerThread.TogglePause(System.Boolean)">
 
-             <summary>
 
-             Signals the main processing loop to pause at the next possible point.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzSchedulerThread.Halt(System.Boolean)">
 
-             <summary>
 
-             Signals the main processing loop to pause at the next possible point.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzSchedulerThread.SignalSchedulingChange(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Signals the main processing loop that a change in scheduling has been
 
-             made - in order to interrupt any sleeping that may be occuring while
 
-             waiting for the fire time to arrive.
 
-             </summary>
 
-             <param name="candidateNewNextFireTimeUtc">
 
-             the time when the newly scheduled trigger
 
-             will fire.  If this method is being called do to some other even (rather
 
-             than scheduling a trigger), the caller should pass null.
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzSchedulerThread.Run">
 
-             <summary>
 
-             The main processing loop of the <see cref="T:Quartz.Core.QuartzSchedulerThread"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerThread.Log">
 
-             <summary>
 
-             Gets the log.
 
-             </summary>
 
-             <value>The log.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerThread.IdleWaitTime">
 
-             <summary>
 
-             Sets the idle wait time.
 
-             </summary>
 
-             <value>The idle wait time.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerThread.Paused">
 
-             <summary>
 
-             Gets a value indicating whether this <see cref="T:Quartz.Core.QuartzSchedulerThread"/> is paused.
 
-             </summary>
 
-             <value><c>true</c> if paused; otherwise, <c>false</c>.</value>
 
-         </member>
 
-         <member name="T:Quartz.Core.SchedulerSignalerImpl">
 
-             <summary> 
 
-             An interface to be used by <see cref="T:Quartz.Spi.IJobStore"/> instances in order to
 
-             communicate signals back to the <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Spi.ISchedulerSignaler">
 
-             <summary> 
 
-             An interface to be used by <see cref="T:Quartz.Spi.IJobStore"/> instances in order to
 
-             communicate signals back to the <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ISchedulerSignaler.NotifyTriggerListenersMisfired(Quartz.ITrigger)">
 
-             <summary>
 
-             Notifies the scheduler about misfired trigger.
 
-             </summary>
 
-             <param name="trigger">The trigger that misfired.</param>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ISchedulerSignaler.NotifySchedulerListenersFinalized(Quartz.ITrigger)">
 
-             <summary>
 
-             Notifies the scheduler about finalized trigger.
 
-             </summary>
 
-             <param name="trigger">The trigger that has finalized.</param>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ISchedulerSignaler.SignalSchedulingChange(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Signals the scheduling change.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ISchedulerSignaler.NotifySchedulerListenersError(System.String,Quartz.SchedulerException)">
 
-             <summary>
 
-             Informs scheduler listeners about an exception that has occurred.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.SchedulerSignalerImpl.NotifyTriggerListenersMisfired(Quartz.ITrigger)">
 
-             <summary>
 
-             Notifies the scheduler about misfired trigger.
 
-             </summary>
 
-             <param name="trigger">The trigger that misfired.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.SchedulerSignalerImpl.NotifySchedulerListenersFinalized(Quartz.ITrigger)">
 
-             <summary>
 
-             Notifies the scheduler about finalized trigger.
 
-             </summary>
 
-             <param name="trigger">The trigger that has finalized.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.SchedulerSignalerImpl.SignalSchedulingChange(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Signals the scheduling change.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.Common.ConfigurationBasedDbMetadataFactory">
 
-             <summary>
 
-             The DbMetadata factory based on application configuration
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.Common.DbMetadataFactory">
 
-             <summary>
 
-             Base class for the DbMetadata Factory implentations
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbMetadataFactory.GetProviderNames">
 
-             <summary>
 
-             Gets the supported provider names.
 
-             </summary>
 
-             <returns>The enumeration of the supported provider names</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbMetadataFactory.GetDbMetadata(System.String)">
 
-             <summary>
 
-             Gets the database metadata assotiated to the specified provider name.
 
-             </summary>
 
-             <param name="providerName">Name of the provider.</param>
 
-             <returns>The metadata instance for the requested provider</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.ConfigurationBasedDbMetadataFactory.#ctor(System.String,System.String)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.Common.EmbeddedAssemblyResourceDbMetadataFactory"/> class.
 
-             </summary>
 
-             <param name="sectionName">Name of the configuration section.</param>
 
-             <param name="providerNamePrefix">The provider name prefix.</param>
 
-             <exception cref="T:System.ArgumentNullException">The providerNamePrefix cannot be null or empty.</exception>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.ConfigurationBasedDbMetadataFactory.GetPropertiesParser">
 
-             <summary>
 
-             Gets the properties parser.
 
-             </summary>
 
-             <returns>The properties parser</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.ConfigurationBasedDbMetadataFactory.GetProviderNames">
 
-             <summary>
 
-             Gets the supported provider names.
 
-             </summary>
 
-             <returns>The enumeration of the supported provider names</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.ConfigurationBasedDbMetadataFactory.GetDbMetadata(System.String)">
 
-             <summary>
 
-             Gets the database metadata assotiated to the specified provider name.
 
-             </summary>
 
-             <param name="providerName">Name of the provider.</param>
 
-             <returns>The metadata instance for the specified name</returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.Common.DbMetadata">
 
-             <summary>
 
-             Metadata information about specific ADO.NET driver library. Metadata is used to
 
-             create correct types of object instances to interact with the underlying
 
-             database.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbMetadata.Init">
 
-             <summary>
 
-             Initializes this instance. Parses information and initializes startup
 
-             values.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbMetadata.GetParameterName(System.String)">
 
-             <summary>
 
-             Gets the name of the parameter which includes the parameter prefix for this
 
-             database.
 
-             </summary>
 
-             <param name="parameterName">Name of the parameter.</param>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.AssemblyName">
 
-             <summary>Gets or sets the name of the assembly that holds the connection library.</summary>
 
-             <value>The name of the assembly.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.ProductName">
 
-             <summary>
 
-             Gets or sets the name of the product.
 
-             </summary>
 
-             <value>The name of the product.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.ConnectionType">
 
-             <summary>
 
-             Gets or sets the type of the connection.
 
-             </summary>
 
-             <value>The type of the connection.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.CommandType">
 
-             <summary>
 
-             Gets or sets the type of the command.
 
-             </summary>
 
-             <value>The type of the command.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.ParameterType">
 
-             <summary>
 
-             Gets or sets the type of the parameter.
 
-             </summary>
 
-             <value>The type of the parameter.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.CommandBuilderType">
 
-             <summary>
 
-             Gets the type of the command builder.
 
-             </summary>
 
-             <value>The type of the command builder.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.CommandBuilderDeriveParametersMethod">
 
-             <summary>Gets the command builder's derive parameters method.</summary>
 
-             <value>The command builder derive parameters method.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.ParameterNamePrefix">
 
-             <summary>
 
-             Gets or sets the parameter name prefix.
 
-             </summary>
 
-             <value>The parameter name prefix.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.ExceptionType">
 
-             <summary>
 
-             Gets or sets the type of the exception that is thrown when using driver
 
-             library.
 
-             </summary>
 
-             <value>The type of the exception.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.BindByName">
 
-             <summary>
 
-             Gets or sets a value indicating whether parameters are bind by name when using
 
-             ADO.NET parameters.
 
-             </summary>
 
-             <value><c>true</c> if parameters are bind by name; otherwise, <c>false</c>.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.ParameterDbType">
 
-             <summary>Gets or sets the type of the database parameters.</summary>
 
-             <value>The type of the parameter db.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.ParameterDbTypeProperty">
 
-             <summary>
 
-             Gets the parameter db type property.
 
-             </summary>
 
-             <value>The parameter db type property.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.ParameterIsNullableProperty">
 
-             <summary>
 
-             Gets the parameter is nullable property.
 
-             </summary>
 
-             <value>The parameter is nullable property.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.DbBinaryTypeName">
 
-             <summary>
 
-             Gets or sets the type of the db binary column. This is a string representation of
 
-             Enum element because this information is database driver specific.
 
-             </summary>
 
-             <value>The type of the db binary.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.DbBinaryType">
 
-             <summary>Gets the type of the db binary.</summary>
 
-             <value>The type of the db binary.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.ParameterDbTypePropertyName">
 
-             <summary>
 
-             Sets the name of the parameter db type property.
 
-             </summary>
 
-             <value>The name of the parameter db type property.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.UseParameterNamePrefixInParameterCollection">
 
-             <summary>
 
-             Gets or sets a value indicating whether [use parameter name prefix in parameter collection].
 
-             </summary>
 
-             <value>
 
-             	<c>true</c> if [use parameter name prefix in parameter collection]; otherwise, <c>false</c>.
 
-             </value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.Common.DbProvider">
 
-             <summary>
 
-             Concrete implementation of <see cref="T:Quartz.Impl.AdoJobStore.Common.IDbProvider"/>.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.Common.IDbProvider">
 
-             <summary>
 
-             Data access provider interface.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.IDbProvider.Initialize">
 
-             <summary>
 
-             Initializes the db provider implementation.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.IDbProvider.CreateCommand">
 
-             <summary>
 
-             Returns a new command object for executing SQL statments/Stored Procedures
 
-             against the database.
 
-             </summary>
 
-             <returns>An new <see cref="T:System.Data.IDbCommand"/></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.IDbProvider.CreateCommandBuilder">
 
-             <summary>
 
-             Returns a new instance of the providers CommandBuilder class.
 
-             </summary>
 
-             <remarks>In .NET 1.1 there was no common base class or interface
 
-             for command builders, hence the return signature is object to
 
-             be portable (but more loosely typed) across .NET 1.1/2.0</remarks>
 
-             <returns>A new Command Builder</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.IDbProvider.CreateConnection">
 
-             <summary>
 
-             Returns a new connection object to communicate with the database.
 
-             </summary>
 
-             <returns>A new <see cref="T:System.Data.IDbConnection"/></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.IDbProvider.CreateParameter">
 
-             <summary>
 
-             Returns a new parameter object for binding values to parameter
 
-             placeholders in SQL statements or Stored Procedure variables.
 
-             </summary> 
 
-             <returns>A new <see cref="T:System.Data.IDbDataParameter"/></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.IDbProvider.Shutdown">
 
-             <summary>
 
-             Shutdowns this instance.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.IDbProvider.ConnectionString">
 
-             <summary>
 
-             Connection string used to create connections.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbProvider.#cctor">
 
-             <summary>
 
-             Parse metadata once in static constructor.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbProvider.#ctor(System.String,System.String)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.Common.DbProvider"/> class.
 
-             </summary>
 
-             <param name="dbProviderName">Name of the db provider.</param>
 
-             <param name="connectionString">The connection string.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbProvider.RegisterDbMetadata(System.String,Quartz.Impl.AdoJobStore.Common.DbMetadata)">
 
-             <summary>
 
-              Registers DB metadata information for given provider name.
 
-             </summary>
 
-             <param name="dbProviderName"></param>
 
-             <param name="metadata"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbProvider.GenerateValidProviderNamesInfo">
 
-             <summary>
 
-             Generates the valid provider names information.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbProvider.CreateCommand">
 
-             <summary>
 
-             Returns a new command object for executing SQL statments/Stored Procedures
 
-             against the database.
 
-             </summary>
 
-             <returns>An new <see cref="T:System.Data.IDbCommand"/></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbProvider.CreateCommandBuilder">
 
-             <summary>
 
-             Returns a new instance of the providers CommandBuilder class.
 
-             </summary>
 
-             <returns>A new Command Builder</returns>
 
-             <remarks>In .NET 1.1 there was no common base class or interface
 
-             for command builders, hence the return signature is object to
 
-             be portable (but more loosely typed) across .NET 1.1/2.0</remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbProvider.CreateConnection">
 
-             <summary>
 
-             Returns a new connection object to communicate with the database.
 
-             </summary>
 
-             <returns>A new <see cref="T:System.Data.IDbConnection"/></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbProvider.CreateParameter">
 
-             <summary>
 
-             Returns a new parameter object for binding values to parameter
 
-             placeholders in SQL statements or Stored Procedure variables.
 
-             </summary>
 
-             <returns>A new <see cref="T:System.Data.IDbDataParameter"/></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbProvider.Shutdown">
 
-             <summary>
 
-             Shutdowns this instance.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbProvider.ConnectionString">
 
-             <summary>
 
-             Connection string used to create connections.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbProvider.Metadata">
 
-             <summary>
 
-             Gets the metadata.
 
-             </summary>
 
-             <value>The metadata.</value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.Common.EmbeddedAssemblyResourceDbMetadataFactory">
 
-             <summary>
 
-             The DbMetadata factory based on embedded assembly resource
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.EmbeddedAssemblyResourceDbMetadataFactory.#ctor(System.String,System.String)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.Common.EmbeddedAssemblyResourceDbMetadataFactory"/> class.
 
-             </summary>
 
-             <param name="resourceName">Name of the resource.</param>
 
-             <param name="propertyGroupName">Name of the property group (The prefix of the provider name).</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.EmbeddedAssemblyResourceDbMetadataFactory.GetProviderNames">
 
-             <summary>
 
-             Gets the supported provider names.
 
-             </summary>
 
-             <returns>The enumeration of the supported provider names</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.EmbeddedAssemblyResourceDbMetadataFactory.GetDbMetadata(System.String)">
 
-             <summary>
 
-             Gets the database metadata assotiated to the specified provider name.
 
-             </summary>
 
-             <param name="providerName">Name of the provider.</param>
 
-             <returns>The metadata instance for the specified name</returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.AdoConstants">
 
-             <summary>
 
-             This interface can be implemented by any <see cref="T:Quartz.Impl.AdoJobStore.IDriverDelegate"/>
 
-             class that needs to use the constants contained herein.
 
-             </summary>
 
-             <author><a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-             <author>James House</author>
 
-             <author>Marko Lahma(.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.Impl.AdoJobStore.AdoConstants.TriggerTypeSimple">
 
-             <summary>
 
-             Simple Trigger type.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Impl.AdoJobStore.AdoConstants.TriggerTypeCron">
 
-             <summary>
 
-             Cron Trigger type.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Impl.AdoJobStore.AdoConstants.TriggerTypeCalendarInterval">
 
-             <summary>
 
-             Calendar Interval Trigger type.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Impl.AdoJobStore.AdoConstants.TriggerTypeDailyTimeInterval">
 
-             <summary>
 
-             Daily Time Interval Trigger type.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Impl.AdoJobStore.AdoConstants.TriggerTypeBlob">
 
-             <summary>
 
-             A general blob Trigger type.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.AdoJobStoreUtil">
 
-             <summary> 
 
-             This class contains utility functions for use in all delegate classes.
 
-             </summary>
 
-             <author><a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.AdoJobStoreUtil.ReplaceTablePrefix(System.String,System.String,System.String)">
 
-             <summary>
 
-             Replace the table prefix in a query by replacing any occurrences of
 
-             "{0}" with the table prefix.
 
-             </summary>
 
-             <param name="query">The unsubstitued query</param>
 
-             <param name="tablePrefix">The table prefix</param>
 
-             <param name="schedNameLiteral">the scheduler name</param>
 
-             <returns>The query, with proper table prefix substituted</returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.AdoUtil">
 
-             <summary>
 
-             Common helper methods for working with ADO.NET.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.CalendarIntervalTriggerPersistenceDelegate">
 
-             <summary>
 
-             Persist a CalendarIntervalTriggerImpl by converting internal fields to and from
 
-             SimplePropertiesTriggerProperties.
 
-             </summary>
 
-             <see cref="T:Quartz.CalendarIntervalScheduleBuilder"/>
 
-             <see cref="T:Quartz.ICalendarIntervalTrigger"/>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.SimplePropertiesTriggerPersistenceDelegateSupport">
 
-             <summary>
 
-             A base implementation of <see cref="T:Quartz.Impl.AdoJobStore.ITriggerPersistenceDelegate"/> that persists
 
-             trigger fields in the "QRTZ_SIMPROP_TRIGGERS" table.  This allows extending
 
-             concrete classes to simply implement a couple methods that do the work of
 
-             getting/setting the trigger's fields, and creating the <see cref="T:Quartz.IScheduleBuilder"/>
 
-             for the particular type of trigger.
 
-             </summary>
 
-             <seealso cref="T:Quartz.Impl.AdoJobStore.CalendarIntervalTriggerPersistenceDelegate"/>
 
-             <author>jhouse</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.ITriggerPersistenceDelegate">
 
-             <summary>
 
-             An interface which provides an implementation for storing a particular
 
-             type of <see cref="T:Quartz.ITrigger"/>'s extended properties.
 
-             </summary>
 
-             <author>jhouse</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.ITriggerPersistenceDelegate.Initialize(System.String,System.String,Quartz.Impl.AdoJobStore.IDbAccessor)">
 
-             <summary>
 
-             Initializes the persistence delegate.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.ITriggerPersistenceDelegate.CanHandleTriggerType(Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Returns whether the trigger type can be handled by delegate.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.ITriggerPersistenceDelegate.GetHandledTriggerTypeDiscriminator">
 
-             <summary>
 
-             Returns database discriminator value for trigger type.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.ITriggerPersistenceDelegate.InsertExtendedTriggerProperties(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger,System.String,Quartz.IJobDetail)">
 
-             <summary>
 
-             Inserts trigger's special properties.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.ITriggerPersistenceDelegate.UpdateExtendedTriggerProperties(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger,System.String,Quartz.IJobDetail)">
 
-             <summary>
 
-             Updates trigger's special properties.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.ITriggerPersistenceDelegate.DeleteExtendedTriggerProperties(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Deletes trigger's special properties.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.ITriggerPersistenceDelegate.LoadExtendedTriggerProperties(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Loads trigger's special properties.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.SimplePropertiesTriggerPersistenceDelegateSupport.CanHandleTriggerType(Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Returns whether the trigger type can be handled by delegate.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.SimplePropertiesTriggerPersistenceDelegateSupport.GetHandledTriggerTypeDiscriminator">
 
-             <summary>
 
-             Returns database discriminator value for trigger type.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder">
 
-             <summary>
 
-             Utility class to keep track of both active transaction
 
-             and connection.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder.#ctor(System.Data.IDbConnection,System.Data.IDbTransaction)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder"/> class.
 
-             </summary>
 
-             <param name="connection">The connection.</param>
 
-             <param name="transaction">The transaction.</param>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder.Connection">
 
-             <summary>
 
-             Gets or sets the connection.
 
-             </summary>
 
-             <value>The connection.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder.Transaction">
 
-             <summary>
 
-             Gets or sets the transaction.
 
-             </summary>
 
-             <value>The transaction.</value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.CronTriggerPersistenceDelegate">
 
-             <summary>
 
-             Persist a CronTriggerImpl.
 
-             </summary>
 
-             <see cref="T:Quartz.CronScheduleBuilder"/>
 
-             <see cref="T:Quartz.ICronTrigger"/>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.DailyTimeIntervalTriggerPersistenceDelegate">
 
-             <summary>
 
-             Persist a DailyTimeIntervalTrigger by converting internal fields to and from
 
-             SimplePropertiesTriggerProperties.
 
-             </summary>
 
-             <see cref="T:Quartz.DailyTimeIntervalScheduleBuilder"/>
 
-             <see cref="T:Quartz.IDailyTimeIntervalTrigger"/>
 
-             <author>Zemian Deng saltnlight5@gmail.com</author>
 
-             <author>Nuno Maia (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.DailyTimeIntervalTriggerPersistenceDelegate.GetHandledTriggerTypeDiscriminator">
 
-             <summary>
 
-             
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.DBSemaphore">
 
-             <summary>
 
-             Base class for database based lock handlers for providing thread/resource locking 
 
-             in order to protect resources from being altered by multiple threads at the 
 
-             same time.
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.StdAdoConstants">
 
-             <summary>
 
-             This class extends <see cref="T:Quartz.Impl.AdoJobStore.AdoConstants"/>
 
-             to include the query string constants in use by the <see cref="T:Quartz.Impl.AdoJobStore.StdAdoDelegate"/>
 
-             class.
 
-             </summary>
 
-             <author><a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.ISemaphore">
 
-             <summary> 
 
-             An interface for providing thread/resource locking in order to protect
 
-             resources from being altered by multiple threads at the same time.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.ISemaphore.ObtainLock(Quartz.Impl.AdoJobStore.Common.DbMetadata,Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary> 
 
-             Grants a lock on the identified resource to the calling thread (blocking
 
-             until it is available).
 
-             </summary>
 
-             <returns> true if the lock was obtained.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.ISemaphore.ReleaseLock(System.String)">
 
-             <summary> Release the lock on the identified resource if it is held by the calling
 
-             thread.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.ISemaphore.RequiresConnection">
 
-             <summary>
 
-             Whether this Semaphore implementation requires a database connection for
 
-             its lock management operations.
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.ISemaphore.ObtainLock(Quartz.Impl.AdoJobStore.Common.DbMetadata,Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.ISemaphore.ReleaseLock(System.String)"/>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.ITablePrefixAware">
 
-             <summary>
 
-             Interface for Quartz objects that need to know what the table prefix of
 
-             the tables used by a ADO.NET JobStore is.
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.ITablePrefixAware.TablePrefix">
 
-             <summary>
 
-             Table prefix to use.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.DBSemaphore.#ctor(System.String,System.String,System.String,System.String,Quartz.Impl.AdoJobStore.Common.IDbProvider)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.DBSemaphore"/> class.
 
-             </summary>
 
-             <param name="tablePrefix">The table prefix.</param>
 
-             <param name="schedName">the scheduler name</param>
 
-             <param name="defaultInsertSQL">The SQL.</param>
 
-             <param name="defaultSQL">The default SQL.</param>
 
-             <param name="dbProvider">The db provider.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.DBSemaphore.ExecuteSQL(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String,System.String)">
 
-             <summary>
 
-             Execute the SQL that will lock the proper database row.
 
-             </summary>
 
-             <param name="conn"></param>
 
-             <param name="lockName"></param>
 
-             <param name="expandedSQL"></param>
 
-             <param name="expandedInsertSQL"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.DBSemaphore.ObtainLock(Quartz.Impl.AdoJobStore.Common.DbMetadata,Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Grants a lock on the identified resource to the calling thread (blocking
 
-             until it is available).
 
-             </summary>
 
-             <param name="metadata"></param>
 
-             <param name="conn"></param>
 
-             <param name="lockName"></param>
 
-             <returns>true if the lock was obtained.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.DBSemaphore.ReleaseLock(System.String)">
 
-             <summary>
 
-             Release the lock on the identified resource if it is held by the calling
 
-             thread.
 
-             </summary>
 
-             <param name="lockName"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.DBSemaphore.IsLockOwner(System.String)">
 
-             <summary>
 
-             Determine whether the calling thread owns a lock on the identified
 
-             resource.
 
-             </summary>
 
-             <param name="lockName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DBSemaphore.LockOwners">
 
-             <summary>
 
-             Gets or sets the lock owners.
 
-             </summary>
 
-             <value>The lock owners.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DBSemaphore.Log">
 
-             <summary>
 
-             Gets the log.
 
-             </summary>
 
-             <value>The log.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DBSemaphore.RequiresConnection">
 
-             <summary>
 
-             This Semaphore implementation does use the database.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DBSemaphore.TablePrefix">
 
-             <summary>
 
-             Gets or sets the table prefix.
 
-             </summary>
 
-             <value>The table prefix.</value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.DelegateInitializationArgs">
 
-             <summary>
 
-             Initialization argumens holder for <see cref="T:Quartz.Impl.AdoJobStore.IDriverDelegate"/> implementations.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DelegateInitializationArgs.UseProperties">
 
-             <summary>
 
-             Whether simple <see cref="T:System.Collections.Specialized.NameValueCollection"/> should be used (for serialization safety).
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DelegateInitializationArgs.Logger">
 
-             <summary>
 
-             The logger to use during execution.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DelegateInitializationArgs.TablePrefix">
 
-             <summary>
 
-             The prefix of all table names.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DelegateInitializationArgs.InstanceName">
 
-             <summary>
 
-             The instance's name.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DelegateInitializationArgs.InstanceId">
 
-             <summary>
 
-             The instance id.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DelegateInitializationArgs.DbProvider">
 
-             <summary>
 
-             The db provider.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DelegateInitializationArgs.TypeLoadHelper">
 
-             <summary>
 
-             The type loading strategy.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DelegateInitializationArgs.ObjectSerializer">
 
-             <summary>
 
-             Object serializer and deserializer strategy to use.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DelegateInitializationArgs.InitString">
 
-             <summary>
 
-             Custom driver delegate initialization.
 
-             </summary>
 
-             <remarks>
 
-             initStrings are of the format:
 
-             settingName=settingValue|otherSettingName=otherSettingValue|...
 
-             </remarks>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.FirebirdDelegate">
 
-             <summary>
 
-             Delegate implementation for Firebird.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.StdAdoDelegate">
 
-             <summary>
 
-             This is meant to be an abstract base class for most, if not all, <see cref="T:Quartz.Impl.AdoJobStore.IDriverDelegate"/>
 
-             implementations. Subclasses should override only those methods that need
 
-             special handling for the DBMS driver in question.
 
-             </summary>
 
-             <author><a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.IDriverDelegate">
 
-             <summary>
 
-             This is the base interface for all driver delegate classes.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             This interface is very similar to the <see cref="T:Quartz.Spi.IJobStore"/>
 
-             interface except each method has an additional <see cref="T:Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder"/>
 
-             parameter.
 
-             </para>
 
-             <para>
 
-             Unless a database driver has some <strong>extremely-DB-specific</strong>
 
-             requirements, any IDriverDelegate implementation classes should extend the
 
-             <see cref="T:Quartz.Impl.AdoJobStore.StdAdoDelegate"/> class.
 
-             </para>
 
-             </remarks>
 
-             <author><a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.Initialize(Quartz.Impl.AdoJobStore.DelegateInitializationArgs)">
 
-             <summary>
 
-             Initializes the driver delegate with configuration data.
 
-             </summary>
 
-             <param name="args"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateTriggerStatesFromOtherStates(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String,System.String)">
 
-             <summary>
 
-             Update all triggers having one of the two given states, to the given new
 
-             state.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="newState">The new state for the triggers</param>
 
-             <param name="oldState1">The first old state to update</param>
 
-             <param name="oldState2">The second old state to update</param>
 
-             <returns>Number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectMisfiredTriggers(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.DateTimeOffset)">
 
-             <summary>
 
-             Get the names of all of the triggers that have misfired - according to
 
-             the given timestamp.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="timestamp">The timestamp.</param>
 
-             <returns>An array of <see cref="T:Quartz.TriggerKey"/> objects</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.HasMisfiredTriggersInState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Get the names of all of the triggers in the given state that have
 
-             misfired - according to the given timestamp.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="state">The state.</param>
 
-             <param name="ts">The time stamp.</param>
 
-             <returns>An array of <see cref="T:Quartz.TriggerKey"/> objects</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectMisfiredTriggersInGroupInState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Get the names of all of the triggers in the given group and state that
 
-             have misfired - according to the given timestamp.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <param name="state">The state.</param>
 
-             <param name="ts">The timestamp.</param>
 
-             <returns>An array of <see cref="T:Quartz.TriggerKey"/> objects</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggersForRecoveringJobs(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary> 
 
-             Select all of the triggers for jobs that are requesting recovery. The
 
-             returned trigger objects will have unique "recoverXXX" trigger names and
 
-             will be in the <see cref="F:Quartz.SchedulerConstants.DefaultRecoveryGroup"/> trigger group.
 
-             </summary>
 
-             <remarks>
 
-             In order to preserve the ordering of the triggers, the fire time will be
 
-             set from the <i>ColumnFiredTime</i> column in the <i>TableFiredTriggers</i>
 
-             table. The caller is responsible for calling <see cref="M:Quartz.Spi.IOperableTrigger.ComputeFirstFireTimeUtc(Quartz.ICalendar)"/>
 
-             on each returned trigger. It is also up to the caller to insert the
 
-             returned triggers to ensure that they are fired.
 
-             </remarks>
 
-             <param name="conn">The DB Connection</param>
 
-             <returns>An array of <see cref="T:Quartz.ITrigger"/> objects</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.DeleteFiredTriggers(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Delete all fired triggers.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <returns>The number of rows deleted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.DeleteFiredTriggers(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Delete all fired triggers of the given instance.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="instanceId">The instance id.</param>
 
-             <returns>The number of rows deleted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.InsertJobDetail(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.IJobDetail)">
 
-             <summary>
 
-             Insert the job detail record.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="job">The job to insert.</param>
 
-             <returns>Number of rows inserted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateJobDetail(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.IJobDetail)">
 
-             <summary>
 
-             Update the job detail record.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="job">The job to update.</param>
 
-             <returns>Number of rows updated.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggerNamesForJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary> <para>
 
-             Get the names of all of the triggers associated with the given job.
 
-             </para>
 
-             
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.DeleteJobDetail(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Delete the job detail record for the given job.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns>the number of rows deleted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.IsJobStateful(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Check whether or not the given job is stateful.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns> true if the job exists and is stateful, false otherwise</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.JobExists(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Check whether or not the given job exists.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns>true if the job exists, false otherwise</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateJobData(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.IJobDetail)">
 
-             <summary>
 
-             Update the job data map for the given job.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="job">The job.</param>
 
-             <returns>the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectJobDetail(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey,Quartz.Spi.ITypeLoadHelper)">
 
-             <summary>
 
-             Select the JobDetail object for a given job name / group name.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <param name="classLoadHelper">The class load helper.</param>
 
-             <returns>The populated JobDetail object</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectNumJobs(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select the total number of jobs stored.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <returns> the total number of jobs stored</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectJobGroups(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary> 
 
-             Select all of the job group names that are stored.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <returns> an array of <see cref="T:System.String"/> group names</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectJobsInGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Select all of the jobs contained in a given group.
 
-             </summary>
 
-             <param name="conn">The DB Connection </param>
 
-             <param name="matcher"></param>
 
-             <returns> an array of <see cref="T:System.String"/> job names</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.InsertTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger,System.String,Quartz.IJobDetail)">
 
-             <summary>
 
-             Insert the base trigger data.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="trigger">The trigger to insert.</param>
 
-             <param name="state">The state that the trigger should be stored in.</param>
 
-             <param name="jobDetail">The job detail.</param>
 
-             <returns>The number of rows inserted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.InsertBlobTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Insert the blob trigger data.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="trigger">The trigger to insert</param>
 
-             <returns>The number of rows inserted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger,System.String,Quartz.IJobDetail)">
 
-             <summary>
 
-             Update the base trigger data.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="trigger">The trigger.</param>
 
-             <param name="state">The state.</param>
 
-             <param name="jobDetail">The job detail.</param>
 
-             <returns>the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateBlobTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Update the blob trigger data.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="trigger">The trigger.</param>
 
-             <returns>the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.TriggerExists(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Check whether or not a trigger exists.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <returns>the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateTriggerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,System.String)">
 
-             <summary>
 
-             Update the state for a given trigger.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <param name="state">The new state for the trigger.</param>
 
-             <returns> the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateTriggerStateFromOtherState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,System.String,System.String)">
 
-             <summary>
 
-             Update the given trigger to the given new state, if it is in the given
 
-             old state.
 
-             </summary>
 
-             <param name="conn">The DB connection</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <param name="newState">The new state for the trigger </param>
 
-             <param name="oldState">The old state the trigger must be in</param>
 
-             <returns> int the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateTriggerStateFromOtherStates(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,System.String,System.String,System.String,System.String)">
 
-             <summary>
 
-             Update the given trigger to the given new state, if it is one of the
 
-             given old states.
 
-             </summary>
 
-             <param name="conn">The DB connection</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <param name="newState">The new state for the trigger</param>
 
-             <param name="oldState1">One of the old state the trigger must be in</param>
 
-             <param name="oldState2">One of the old state the trigger must be in</param>
 
-             <param name="oldState3">One of the old state the trigger must be in
 
-             </param>
 
-             <returns> int the number of rows updated
 
-             </returns>
 
-             <throws>  SQLException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateTriggerGroupStateFromOtherStates(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey},System.String,System.String,System.String,System.String)">
 
-             <summary>
 
-             Update all triggers in the given group to the given new state, if they
 
-             are in one of the given old states.
 
-             </summary>
 
-             <param name="conn">The DB connection</param>
 
-             <param name="matcher"></param>
 
-             <param name="newState">The new state for the trigger</param>
 
-             <param name="oldState1">One of the old state the trigger must be in</param>
 
-             <param name="oldState2">One of the old state the trigger must be in</param>
 
-             <param name="oldState3">One of the old state the trigger must be in</param>
 
-             <returns>The number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateTriggerGroupStateFromOtherState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey},System.String,System.String)">
 
-             <summary>
 
-             Update all of the triggers of the given group to the given new state, if
 
-             they are in the given old state.
 
-             </summary>
 
-             <param name="conn">The DB connection</param>
 
-             <param name="matcher"></param>
 
-             <param name="newState">The new state for the trigger group</param>
 
-             <param name="oldState">The old state the triggers must be in.</param>
 
-             <returns> int the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateTriggerStatesForJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey,System.String)">
 
-             <summary>
 
-             Update the states of all triggers associated with the given job.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <param name="state">The new state for the triggers.</param>
 
-             <returns>The number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateTriggerStatesForJobFromOtherState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey,System.String,System.String)">
 
-             <summary>
 
-             Update the states of any triggers associated with the given job, that
 
-             are the given current state.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <param name="state">The new state for the triggers</param>
 
-             <param name="oldState">The old state of the triggers</param>
 
-             <returns> the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.DeleteBlobTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Delete the BLOB trigger data for a trigger.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <returns>The number of rows deleted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.DeleteTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Delete the base trigger data for a trigger.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <returns> the number of rows deleted </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectNumTriggersForJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Select the number of triggers associated with a given job.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns> the number of triggers for the given job </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectJobForTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,Quartz.Spi.ITypeLoadHelper)">
 
-             <summary>
 
-             Select the job to which the trigger is associated.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectJobForTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,Quartz.Spi.ITypeLoadHelper,System.Boolean)">
 
-             <summary>
 
-             Select the job to which the trigger is associated. Allow option to load actual job class or not. When case of
 
-             remove, we do not need to load the type, which in many cases, it's no longer exists.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggersForJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Select the triggers for a job>
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns> an array of <see cref="T:Quartz.ITrigger"/> objects associated with a given job. </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggersForCalendar(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Select the triggers for a calendar
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="calName">Name of the calendar.</param>
 
-             <returns>
 
-             An array of <see cref="T:Quartz.ITrigger"/> objects associated with a given job.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Select a trigger.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <returns>The <see cref="T:Quartz.ITrigger"/> object.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggerJobDataMap(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Select a trigger's JobDataMap.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <returns>The <see cref="T:Quartz.JobDataMap"/> of the Trigger, never null, but possibly empty.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Select a trigger's state value.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <returns>The <see cref="T:Quartz.ITrigger"/> object.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggerStatus(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary> 
 
-             Select a triggers status (state and next fire time).
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <returns>A <see cref="T:Quartz.Impl.AdoJobStore.TriggerStatus"/> object, or null</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectNumTriggers(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select the total number of triggers stored.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <returns>The total number of triggers stored.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggerGroups(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select all of the trigger group names that are stored.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <returns>An array of <see cref="T:System.String"/> group names.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggersInGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Select all of the triggers contained in a given group. 
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="matcher"></param>
 
-             <returns>An array of <see cref="T:System.String"/> trigger names.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggersInState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Select all of the triggers in a given state.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="state">The state the triggers must be in.</param>
 
-             <returns>An array of trigger <see cref="T:Quartz.TriggerKey"/>s.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.InsertPausedTriggerGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Inserts the paused trigger group.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.DeletePausedTriggerGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Deletes the paused trigger group.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.DeleteAllPausedTriggerGroups(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Deletes all paused trigger groups.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.IsTriggerGroupPaused(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Determines whether the specified trigger group is paused.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns>
 
-             	<c>true</c> if trigger group is paused; otherwise, <c>false</c>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectPausedTriggerGroups(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Selects the paused trigger groups.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.IsExistingTriggerGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Determines whether given trigger group already exists.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns>
 
-             	<c>true</c> if trigger group exists; otherwise, <c>false</c>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.InsertCalendar(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,Quartz.ICalendar)">
 
-             <summary>
 
-             Insert a new calendar.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="calendarName">The name for the new calendar.</param>
 
-             <param name="calendar">The calendar.</param>
 
-             <returns>The number of rows inserted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateCalendar(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,Quartz.ICalendar)">
 
-             <summary> 
 
-             Update a calendar.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="calendarName">The name for the new calendar.</param>
 
-             <param name="calendar">The calendar.</param>
 
-             <returns>The number of rows updated.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.CalendarExists(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Check whether or not a calendar exists.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="calendarName">The name of the calendar.</param>
 
-             <returns>true if the trigger exists, false otherwise.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectCalendar(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Select a calendar.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="calendarName">The name of the calendar.</param>
 
-             <returns>The Calendar.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.CalendarIsReferenced(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Check whether or not a calendar is referenced by any triggers.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="calendarName">The name of the calendar.</param>
 
-             <returns>true if any triggers reference the calendar, false otherwise</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.DeleteCalendar(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Delete a calendar.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="calendarName">The name of the trigger.</param>
 
-             <returns>The number of rows deleted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectNumCalendars(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary> 
 
-             Select the total number of calendars stored.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <returns>The total number of calendars stored.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectCalendars(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select all of the stored calendars.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <returns>An array of <see cref="T:System.String"/> calendar names.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggerForFireTime(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.DateTimeOffset)">
 
-             <summary>
 
-             Select the trigger that will be fired at the given fire time.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="fireTime">The time that the trigger will be fired.</param>
 
-             <returns> 
 
-             A <see cref="T:Quartz.TriggerKey"/> representing the
 
-             trigger that will be fired at the given fire time, or null if no
 
-             trigger will be fired at that time
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.InsertFiredTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger,System.String,Quartz.IJobDetail)">
 
-             <summary>
 
-             Insert a fired trigger.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="trigger">The trigger.</param>
 
-             <param name="state">The state that the trigger should be stored in.</param>
 
-             <param name="jobDetail">The job detail.</param>
 
-             <returns>The number of rows inserted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectFiredTriggerRecords(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String)">
 
-             <summary>
 
-             Select the states of all fired-trigger records for a given trigger, or
 
-             trigger group if trigger name is <see langword="null" />.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="triggerName">Name of the trigger.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns>A list of FiredTriggerRecord objects.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectFiredTriggerRecordsByJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String)">
 
-             <summary>
 
-             Select the states of all fired-trigger records for a given job, or job
 
-             group if job name is <see langword="null" />.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobName">Name of the job.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns>A List of FiredTriggerRecord objects.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectInstancesFiredTriggerRecords(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Select the states of all fired-trigger records for a given scheduler
 
-             instance.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="instanceName">Name of the instance.</param>
 
-             <returns>A list of FiredTriggerRecord objects.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.DeleteFiredTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Delete a fired trigger.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="entryId">The fired trigger entry to delete.</param>
 
-             <returns>The number of rows deleted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectJobExecutionCount(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Get the number instances of the identified job currently executing.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns>
 
-             The number instances of the identified job currently executing.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.InsertSchedulerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.DateTimeOffset,System.TimeSpan)">
 
-             <summary>
 
-             Insert a scheduler-instance state record.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="instanceId">The instance id.</param>
 
-             <param name="checkInTime">The check in time.</param>
 
-             <param name="interval">The interval.</param>
 
-             <returns>The number of inserted rows.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.DeleteSchedulerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Delete a scheduler-instance state record.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="instanceId">The instance id.</param>
 
-             <returns>The number of deleted rows.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateSchedulerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Update a scheduler-instance state record.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="instanceId">The instance id.</param>
 
-             <param name="checkInTime">The check in time.</param>
 
-             <returns>The number of updated rows.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectSchedulerStateRecords(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             A List of all current <see cref="T:Quartz.Impl.AdoJobStore.SchedulerStateRecord"/>s.
 
-             <para>
 
-             If instanceId is not null, then only the record for the identified
 
-             instance will be returned.
 
-             </para>
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="instanceName">The instance id.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggerToAcquire(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.DateTimeOffset,System.DateTimeOffset,System.Int32)">
 
-             <summary>
 
-             Select the next trigger which will fire to fire between the two given timestamps 
 
-             in ascending order of fire time, and then descending by priority.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="noLaterThan">highest value of <see cref="M:Quartz.ITrigger.GetNextFireTimeUtc"/> of the triggers (exclusive)</param>
 
-             <param name="noEarlierThan">highest value of <see cref="M:Quartz.ITrigger.GetNextFireTimeUtc"/> of the triggers (inclusive)</param>
 
-             <param name="maxCount">maximum number of trigger keys allow to acquired in the returning list.</param>
 
-             <returns>A (never null, possibly empty) list of the identifiers (Key objects) of the next triggers to be fired.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectFiredTriggerInstanceNames(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select the distinct instance names of all fired-trigger records.
 
-             </summary>
 
-             <remarks>
 
-             This is useful when trying to identify orphaned fired triggers (a 
 
-             fired trigger without a scheduler state record.) 
 
-             </remarks>
 
-             <param name="conn">The conn.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.CountMisfiredTriggersInState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Counts the misfired triggers in states.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="state1">The state1.</param>
 
-             <param name="ts">The ts.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.HasMisfiredTriggersInState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.DateTimeOffset,System.Int32,System.Collections.Generic.IList{Quartz.TriggerKey})">
 
-             <summary>
 
-             Selects the misfired triggers in states.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="state1">The state1.</param>
 
-             <param name="ts">The ts.</param>
 
-             <param name="count">The count.</param>
 
-             <param name="resultList">The result list.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.ClearData(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Clear (delete!) all scheduling data - all <see cref="T:Quartz.IJob"/>s, <see cref="T:Quartz.ITrigger"/>s
 
-             <see cref="T:Quartz.ICalendar"/>s.
 
-             </summary>
 
-             <param name="conn"></param>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.IDbAccessor">
 
-             <summary>
 
-             Service interface or modifying <see cref="T:System.Data.IDbCommand"/> parameters 
 
-             and resultset values.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDbAccessor.PrepareCommand(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Prepares a <see cref="T:System.Data.IDbCommand"/> to be used to access database.
 
-             </summary>
 
-             <param name="cth">Connection and tranasction pair</param>
 
-             <param name="commandText">SQL to run</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDbAccessor.AddCommandParameter(System.Data.IDbCommand,System.String,System.Object)">
 
-             <summary>
 
-             Adds a parameter to <see cref="T:System.Data.IDbCommand"/>.
 
-             </summary>
 
-             <param name="cmd">Command to add parameter to</param>
 
-             <param name="paramName">Parameter's name</param>
 
-             <param name="paramValue">Parameter's value</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDbAccessor.AddCommandParameter(System.Data.IDbCommand,System.String,System.Object,System.Enum)">
 
-             <summary>
 
-             Adds a parameter to <see cref="T:System.Data.IDbCommand"/>.
 
-             </summary>
 
-             <param name="cmd">Command to add parameter to</param>
 
-             <param name="paramName">Parameter's name</param>
 
-             <param name="paramValue">Parameter's value</param>
 
-             <param name="dataType">Parameter's data type</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDbAccessor.GetDbBooleanValue(System.Boolean)">
 
-             <summary>
 
-             Gets the db presentation for boolean value. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="booleanValue">Value to map to database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDbAccessor.GetBooleanFromDbValue(System.Object)">
 
-             <summary>
 
-             Gets the boolean value from db presentation. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="columnValue">Value to map from database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDbAccessor.GetDbDateTimeValue(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Gets the db presentation for date/time value. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="dateTimeValue">Value to map to database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDbAccessor.GetDateTimeFromDbValue(System.Object)">
 
-             <summary>
 
-             Gets the date/time value from db presentation. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="columnValue">Value to map from database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDbAccessor.GetDbTimeSpanValue(System.Nullable{System.TimeSpan})">
 
-             <summary>
 
-             Gets the db presentation for time span value. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="timeSpanValue">Value to map to database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDbAccessor.GetTimeSpanFromDbValue(System.Object)">
 
-             <summary>
 
-             Gets the time span value from db presentation. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="columnValue">Value to map from database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.Initialize(Quartz.Impl.AdoJobStore.DelegateInitializationArgs)">
 
-             <summary>
 
-             Initializes the driver delegate.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateTriggerStatesFromOtherStates(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String,System.String)">
 
-             <summary>
 
-             Insert the job detail record.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="newState">the new state for the triggers</param>
 
-             <param name="oldState1">the first old state to update</param>
 
-             <param name="oldState2">the second old state to update</param>
 
-             <returns>number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectMisfiredTriggers(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.DateTimeOffset)">
 
-             <summary>
 
-             Get the names of all of the triggers that have misfired.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="ts">The ts.</param>
 
-             <returns>an array of <see cref="T:Quartz.TriggerKey"/> objects</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggersInState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary> 
 
-             Select all of the triggers in a given state.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="state">The state the triggers must be in</param>
 
-             <returns> an array of trigger <see cref="T:Quartz.TriggerKey"/>s </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.HasMisfiredTriggersInState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Get the names of all of the triggers in the given state that have
 
-             misfired - according to the given timestamp.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="state">The state.</param>
 
-             <param name="ts">The time stamp.</param>
 
-             <returns>An array of <see cref="T:Quartz.TriggerKey"/> objects</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.HasMisfiredTriggersInState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.DateTimeOffset,System.Int32,System.Collections.Generic.IList{Quartz.TriggerKey})">
 
-             <summary>
 
-             Get the names of all of the triggers in the given state that have
 
-             misfired - according to the given timestamp.  No more than count will
 
-             be returned.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="state1">The state1.</param>
 
-             <param name="ts">The ts.</param>
 
-             <param name="count">The most misfired triggers to return, negative for all</param>
 
-             <param name="resultList">
 
-               Output parameter.  A List of <see cref="T:Quartz.TriggerKey"/> objects.  Must not be null
 
-             </param>
 
-             <returns>Whether there are more misfired triggers left to find beyond the given count.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.CountMisfiredTriggersInState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Get the number of triggers in the given state that have
 
-             misfired - according to the given timestamp.
 
-             </summary>
 
-             <param name="conn"></param>
 
-             <param name="state1"></param>
 
-             <param name="ts"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectMisfiredTriggersInGroupInState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Get the names of all of the triggers in the given group and state that
 
-             have misfired.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <param name="state">The state.</param>
 
-             <param name="ts">The timestamp.</param>
 
-             <returns>an array of <see cref="T:Quartz.TriggerKey"/> objects</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggersForRecoveringJobs(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select all of the triggers for jobs that are requesting recovery. The
 
-             returned trigger objects will have unique "recoverXXX" trigger names and
 
-             will be in the <see cref="F:Quartz.SchedulerConstants.DefaultRecoveryGroup"/>
 
-             trigger group.
 
-             </summary>
 
-             <remarks>
 
-             In order to preserve the ordering of the triggers, the fire time will be
 
-             set from the <i>ColumnFiredTime</i> column in the <i>TableFiredTriggers</i>
 
-             table. The caller is responsible for calling <see cref="M:Quartz.Spi.IOperableTrigger.ComputeFirstFireTimeUtc(Quartz.ICalendar)"/>
 
-             on each returned trigger. It is also up to the caller to insert the
 
-             returned triggers to ensure that they are fired.
 
-             </remarks>
 
-             <param name="conn">The DB Connection</param>
 
-             <returns> an array of <see cref="T:Quartz.ITrigger"/> objects</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.DeleteFiredTriggers(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Delete all fired triggers.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <returns>The number of rows deleted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.DeleteFiredTriggers(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Delete all fired triggers of the given instance.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="instanceName">The instance id.</param>
 
-             <returns>The number of rows deleted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.ClearData(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Clear (delete!) all scheduling data - all <see cref="T:Quartz.IJob"/>s, <see cref="T:Quartz.ITrigger"/>s
 
-             <see cref="T:Quartz.ICalendar"/>s.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.InsertJobDetail(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.IJobDetail)">
 
-             <summary>
 
-             Insert the job detail record.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="job">The job to insert.</param>
 
-             <returns>Number of rows inserted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.GetDbBooleanValue(System.Boolean)">
 
-             <summary>
 
-             Gets the db presentation for boolean value. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="booleanValue">Value to map to database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.GetBooleanFromDbValue(System.Object)">
 
-             <summary>
 
-             Gets the boolean value from db presentation. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="columnValue">Value to map from database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.GetDbDateTimeValue(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Gets the db presentation for date/time value. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="dateTimeValue">Value to map to database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.GetDateTimeFromDbValue(System.Object)">
 
-             <summary>
 
-             Gets the date/time value from db presentation. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="columnValue">Value to map from database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.GetDbTimeSpanValue(System.Nullable{System.TimeSpan})">
 
-             <summary>
 
-             Gets the db presentation for time span value. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="timeSpanValue">Value to map to database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.GetTimeSpanFromDbValue(System.Object)">
 
-             <summary>
 
-             Gets the time span value from db presentation. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="columnValue">Value to map from database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateJobDetail(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.IJobDetail)">
 
-             <summary>
 
-             Update the job detail record.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="job">The job to update.</param>
 
-             <returns>Number of rows updated.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggerNamesForJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Get the names of all of the triggers associated with the given job.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns>An array of <see cref="T:Quartz.TriggerKey"/> objects</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.DeleteJobDetail(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Delete the job detail record for the given job.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns>the number of rows deleted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.IsJobStateful(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Check whether or not the given job is stateful.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns>
 
-             true if the job exists and is stateful, false otherwise
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.JobExists(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Check whether or not the given job exists.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns>true if the job exists, false otherwise</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateJobData(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.IJobDetail)">
 
-             <summary>
 
-             Update the job data map for the given job.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="job">the job to update</param>
 
-             <returns>the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectJobDetail(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey,Quartz.Spi.ITypeLoadHelper)">
 
-             <summary>
 
-             Select the JobDetail object for a given job name / group name.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <param name="loadHelper">The load helper.</param>
 
-             <returns>The populated JobDetail object.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.GetMapFromProperties(System.Data.IDataReader,System.Int32)">
 
-             <summary> build Map from java.util.Properties encoding.</summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectNumJobs(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select the total number of jobs stored.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <returns>The total number of jobs stored.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectJobGroups(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select all of the job group names that are stored.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <returns>An array of <see cref="T:System.String"/> group names.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectJobsInGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Select all of the jobs contained in a given group.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="matcher"></param>
 
-             <returns>An array of <see cref="T:System.String"/> job names.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.InsertTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger,System.String,Quartz.IJobDetail)">
 
-             <summary>
 
-             Insert the base trigger data.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="trigger">the trigger to insert</param>
 
-             <param name="state">the state that the trigger should be stored in</param>
 
-             <param name="jobDetail">The job detail.</param>
 
-             <returns>the number of rows inserted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.InsertBlobTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Insert the blob trigger data.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="trigger">The trigger to insert.</param>
 
-             <returns>The number of rows inserted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger,System.String,Quartz.IJobDetail)">
 
-             <summary>
 
-             Update the base trigger data.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="trigger">The trigger to insert.</param>
 
-             <param name="state">The state that the trigger should be stored in.</param>
 
-             <param name="jobDetail">The job detail.</param>
 
-             <returns>The number of rows updated.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateBlobTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Update the blob trigger data.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="trigger">The trigger to insert.</param>
 
-             <returns>The number of rows updated.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.TriggerExists(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Check whether or not a trigger exists.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <returns>true if the trigger exists, false otherwise</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateTriggerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,System.String)">
 
-             <summary>
 
-             Update the state for a given trigger.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <param name="state">The new state for the trigger.</param>
 
-             <returns>The number of rows updated.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateTriggerStateFromOtherStates(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,System.String,System.String,System.String,System.String)">
 
-             <summary>
 
-             Update the given trigger to the given new state, if it is one of the
 
-             given old states.
 
-             </summary>
 
-             <param name="conn">The DB connection.</param>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <param name="newState">The new state for the trigger.</param>
 
-             <param name="oldState1">One of the old state the trigger must be in.</param>
 
-             <param name="oldState2">One of the old state the trigger must be in.</param>
 
-             <param name="oldState3">One of the old state the trigger must be in.</param>
 
-             <returns>The number of rows updated.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateTriggerGroupStateFromOtherStates(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey},System.String,System.String,System.String,System.String)">
 
-             <summary>
 
-             Update all triggers in the given group to the given new state, if they
 
-             are in one of the given old states.
 
-             </summary>
 
-             <param name="conn">The DB connection.</param>
 
-             <param name="matcher"></param>
 
-             <param name="newState">The new state for the trigger.</param>
 
-             <param name="oldState1">One of the old state the trigger must be in.</param>
 
-             <param name="oldState2">One of the old state the trigger must be in.</param>
 
-             <param name="oldState3">One of the old state the trigger must be in.</param>
 
-             <returns>The number of rows updated.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateTriggerStateFromOtherState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,System.String,System.String)">
 
-             <summary>
 
-             Update the given trigger to the given new state, if it is in the given
 
-             old state.
 
-             </summary>
 
-             <param name="conn">the DB connection</param>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <param name="newState">the new state for the trigger</param>
 
-             <param name="oldState">the old state the trigger must be in</param>
 
-             <returns>int the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateTriggerGroupStateFromOtherState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey},System.String,System.String)">
 
-             <summary>
 
-             Update all of the triggers of the given group to the given new state, if
 
-             they are in the given old state.
 
-             </summary>
 
-             <param name="conn">the DB connection</param>
 
-             <param name="matcher"></param>
 
-             <param name="newState">the new state for the trigger group</param>
 
-             <param name="oldState">the old state the triggers must be in</param>
 
-             <returns>int the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateTriggerStatesForJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey,System.String)">
 
-             <summary>
 
-             Update the states of all triggers associated with the given job.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="jobKey">the key of the job</param>
 
-             <param name="state">the new state for the triggers</param>
 
-             <returns>the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateTriggerStatesForJobFromOtherState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey,System.String,System.String)">
 
-             <summary>
 
-             Updates the state of the trigger states for job from other.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="jobKey">Key of the job.</param>
 
-             <param name="state">The state.</param>
 
-             <param name="oldState">The old state.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.DeleteBlobTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Delete the cron trigger data for a trigger.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <returns>the number of rows deleted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.DeleteTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Delete the base trigger data for a trigger.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <returns>the number of rows deleted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectNumTriggersForJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Select the number of triggers associated with a given job.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="jobKey">the key of the job</param>
 
-             <returns>the number of triggers for the given job</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggersForJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Select the triggers for a job
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="jobKey">the key of the job</param>
 
-             <returns>
 
-             an array of <see cref="T:Quartz.ITrigger"/> objects
 
-             associated with a given job.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggersForCalendar(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Select the triggers for a calendar
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="calName">Name of the calendar.</param>
 
-             <returns>
 
-             An array of <see cref="T:Quartz.ITrigger"/> objects associated with a given job.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Select a trigger.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <returns>The <see cref="T:Quartz.ITrigger"/> object</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggerJobDataMap(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Select a trigger's JobDataMap.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <returns>The <see cref="T:Quartz.JobDataMap"/> of the Trigger, never null, but possibly empty. </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Select a trigger's state value.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <returns>The <see cref="T:Quartz.ITrigger"/> object</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggerStatus(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Select a trigger status (state and next fire time).
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <returns>
 
-             a <see cref="T:Quartz.Impl.AdoJobStore.TriggerStatus"/> object, or null
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectNumTriggers(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select the total number of triggers stored.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <returns>the total number of triggers stored</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggerGroups(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select all of the trigger group names that are stored.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <returns>
 
-             an array of <see cref="T:System.String"/> group names
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggersInGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Select all of the triggers contained in a given group.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="matcher"></param>
 
-             <returns>
 
-             an array of <see cref="T:System.String"/> trigger names
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.InsertPausedTriggerGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Inserts the paused trigger group.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.DeletePausedTriggerGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Deletes the paused trigger group.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.DeleteAllPausedTriggerGroups(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Deletes all paused trigger groups.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.IsTriggerGroupPaused(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Determines whether the specified trigger group is paused.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns>
 
-             	<c>true</c> if trigger group is paused; otherwise, <c>false</c>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.IsExistingTriggerGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Determines whether given trigger group already exists.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns>
 
-             	<c>true</c> if trigger group exists; otherwise, <c>false</c>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.InsertCalendar(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,Quartz.ICalendar)">
 
-             <summary>
 
-             Insert a new calendar.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="calendarName">The name for the new calendar.</param>
 
-             <param name="calendar">The calendar.</param>
 
-             <returns>the number of rows inserted</returns>
 
-             <throws>  IOException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateCalendar(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,Quartz.ICalendar)">
 
-             <summary>
 
-             Update a calendar.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="calendarName">The name for the new calendar.</param>
 
-             <param name="calendar">The calendar.</param>
 
-             <returns>the number of rows updated</returns>
 
-             <throws>  IOException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.CalendarExists(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Check whether or not a calendar exists.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="calendarName">The name of the calendar.</param>
 
-             <returns>
 
-             true if the trigger exists, false otherwise
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectCalendar(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Select a calendar.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="calendarName">The name of the calendar.</param>
 
-             <returns>the Calendar</returns>
 
-             <throws>  ClassNotFoundException </throws>
 
-             <throws>  IOException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.CalendarIsReferenced(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Check whether or not a calendar is referenced by any triggers.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="calendarName">The name of the calendar.</param>
 
-             <returns>
 
-             true if any triggers reference the calendar, false otherwise
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.DeleteCalendar(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Delete a calendar.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="calendarName">The name of the trigger.</param>
 
-             <returns>the number of rows deleted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectNumCalendars(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select the total number of calendars stored.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <returns>the total number of calendars stored</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectCalendars(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select all of the stored calendars.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <returns>
 
-             an array of <see cref="T:System.String"/> calendar names
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggerForFireTime(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.DateTimeOffset)">
 
-             <summary>
 
-             Select the trigger that will be fired at the given fire time.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="fireTime">the time that the trigger will be fired</param>
 
-             <returns>
 
-             a <see cref="T:Quartz.TriggerKey"/> representing the
 
-             trigger that will be fired at the given fire time, or null if no
 
-             trigger will be fired at that time
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggerToAcquire(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.DateTimeOffset,System.DateTimeOffset,System.Int32)">
 
-             <summary>
 
-             Select the next trigger which will fire to fire between the two given timestamps 
 
-             in ascending order of fire time, and then descending by priority.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="noLaterThan">highest value of <see cref="M:Quartz.ITrigger.GetNextFireTimeUtc"/> of the triggers (exclusive)</param>
 
-             <param name="noEarlierThan">highest value of <see cref="M:Quartz.ITrigger.GetNextFireTimeUtc"/> of the triggers (inclusive)</param>
 
-             <param name="maxCount">maximum number of trigger keys allow to acquired in the returning list.</param>
 
-             <returns>A (never null, possibly empty) list of the identifiers (Key objects) of the next triggers to be fired.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.InsertFiredTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger,System.String,Quartz.IJobDetail)">
 
-             <summary>
 
-             Insert a fired trigger.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="trigger">the trigger</param>
 
-             <param name="state">the state that the trigger should be stored in</param>
 
-             <param name="job">The job.</param>
 
-             <returns>the number of rows inserted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateFiredTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger,System.String,Quartz.IJobDetail)">
 
-             <summary>
 
-             <para>
 
-             Update a fired trigger.
 
-             </para>
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="conn"></param>
 
-             the DB Connection
 
-             <param name="trigger"></param>
 
-             the trigger
 
-             <param name="state"></param>
 
-             <param name="job"></param>
 
-             the state that the trigger should be stored in
 
-             <returns>the number of rows inserted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectFiredTriggerRecords(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String)">
 
-             <summary>
 
-             Select the states of all fired-trigger records for a given trigger, or
 
-             trigger group if trigger name is <see langword="null"/>.
 
-             </summary>
 
-             <param name="conn">The DB connection.</param>
 
-             <param name="triggerName">Name of the trigger.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns>a List of <see cref="T:Quartz.Impl.AdoJobStore.FiredTriggerRecord"/> objects.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectFiredTriggerRecordsByJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String)">
 
-             <summary>
 
-             Select the states of all fired-trigger records for a given job, or job
 
-             group if job name is <see langword="null"/>.
 
-             </summary>
 
-             <param name="conn">The DB connection.</param>
 
-             <param name="jobName">Name of the job.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns>a List of <see cref="T:Quartz.Impl.AdoJobStore.FiredTriggerRecord"/> objects.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectInstancesFiredTriggerRecords(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Select the states of all fired-trigger records for a given scheduler
 
-             instance.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="instanceName">Name of the instance.</param>
 
-             <returns>A list of FiredTriggerRecord objects.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectFiredTriggerInstanceNames(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select the distinct instance names of all fired-trigger records.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <returns></returns>
 
-             <remarks>
 
-             This is useful when trying to identify orphaned fired triggers (a
 
-             fired trigger without a scheduler state record.)
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.DeleteFiredTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Delete a fired trigger.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="entryId">the fired trigger entry to delete</param>
 
-             <returns>the number of rows deleted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectJobExecutionCount(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Selects the job execution count.
 
-             </summary>
 
-             <param name="conn">The DB connection.</param>
 
-             <param name="jobKey">The key of the job.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.InsertSchedulerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.DateTimeOffset,System.TimeSpan)">
 
-             <summary>
 
-             Inserts the state of the scheduler.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="instanceName">The instance id.</param>
 
-             <param name="checkInTime">The check in time.</param>
 
-             <param name="interval">The interval.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.DeleteSchedulerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Deletes the state of the scheduler.
 
-             </summary>
 
-             <param name="conn">The database connection.</param>
 
-             <param name="instanceName">The instance id.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateSchedulerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Updates the state of the scheduler.
 
-             </summary>
 
-             <param name="conn">The database connection.</param>
 
-             <param name="instanceName">The instance id.</param>
 
-             <param name="checkInTime">The check in time.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectSchedulerStateRecords(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             A List of all current <see cref="T:Quartz.Impl.AdoJobStore.SchedulerStateRecord"/>s.
 
-             <para>
 
-             If instanceId is not null, then only the record for the identified
 
-             instance will be returned.
 
-             </para>
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="instanceName">The instance id.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.ReplaceTablePrefix(System.String)">
 
-             <summary>
 
-             Replace the table prefix in a query by replacing any occurrences of
 
-             "{0}" with the table prefix.
 
-             </summary>
 
-             <param name="query">The unsubstitued query</param>
 
-             <returns>The query, with proper table prefix substituted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SerializeObject(System.Object)">
 
-             <summary>
 
-             Create a serialized <see lanword="byte[]"/> version of an Object.
 
-             </summary>
 
-             <param name="obj">the object to serialize</param>
 
-             <returns>Serialized object as byte array.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SerializeJobData(Quartz.JobDataMap)">
 
-             <summary>
 
-             Remove the transient data from and then create a serialized <see cref="T:System.IO.MemoryStream"/>
 
-             version of a <see cref="T:Quartz.JobDataMap"/> and returns the underlying bytes.
 
-             </summary>
 
-             <param name="data">The data.</param>
 
-             <returns>the serialized data as byte array</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SerializeProperties(Quartz.JobDataMap)">
 
-             <summary>
 
-             serialize
 
-             </summary>
 
-             <param name="data">The data.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.ConvertFromProperty(System.Collections.Specialized.NameValueCollection)">
 
-             <summary> 
 
-             Convert the JobDataMap into a list of properties.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.ConvertToProperty(System.Collections.Generic.IDictionary{System.String,System.Object})">
 
-             <summary>
 
-             Convert the JobDataMap into a list of properties.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.GetObjectFromBlob``1(System.Data.IDataReader,System.Int32)">
 
-             <summary>
 
-             This method should be overridden by any delegate subclasses that need
 
-             special handling for BLOBs. The default implementation uses standard
 
-             ADO.NET operations.
 
-             </summary>
 
-             <param name="rs">The data reader, already queued to the correct row.</param>
 
-             <param name="colIndex">The column index for the BLOB.</param>
 
-             <returns>The deserialized object from the DataReader BLOB.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.GetJobDataFromBlob``1(System.Data.IDataReader,System.Int32)">
 
-             <summary>
 
-             This method should be overridden by any delegate subclasses that need
 
-             special handling for BLOBs for job details. 
 
-             </summary>
 
-             <param name="rs">The result set, already queued to the correct row.</param>
 
-             <param name="colIndex">The column index for the BLOB.</param>
 
-             <returns>The deserialized Object from the ResultSet BLOB.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectPausedTriggerGroups(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Selects the paused trigger groups.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.FirebirdDelegate.GetSelectNextTriggerToAcquireSql(System.Int32)">
 
-             <summary>
 
-             Gets the select next trigger to acquire SQL clause.
 
-             FireBird version with ROWS support.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.FiredTriggerRecord">
 
-             <summary>
 
-             Conveys the state of a fired-trigger record.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.FiredTriggerRecord.FireInstanceId">
 
-             <summary>
 
-             Gets or sets the fire instance id.
 
-             </summary>
 
-             <value>The fire instance id.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.FiredTriggerRecord.FireTimestamp">
 
-             <summary>
 
-             Gets or sets the fire timestamp.
 
-             </summary>
 
-             <value>The fire timestamp.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.FiredTriggerRecord.ScheduleTimestamp">
 
-             <summary>
 
-             Gets or sets the scheduled fire timestamp.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.FiredTriggerRecord.JobDisallowsConcurrentExecution">
 
-             <summary>
 
-             Gets or sets a value indicating whether job disallows concurrent execution.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.FiredTriggerRecord.JobKey">
 
-             <summary>
 
-             Gets or sets the job key.
 
-             </summary>
 
-             <value>The job key.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.FiredTriggerRecord.SchedulerInstanceId">
 
-             <summary>
 
-             Gets or sets the scheduler instance id.
 
-             </summary>
 
-             <value>The scheduler instance id.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.FiredTriggerRecord.TriggerKey">
 
-             <summary>
 
-             Gets or sets the trigger key.
 
-             </summary>
 
-             <value>The trigger key.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.FiredTriggerRecord.FireInstanceState">
 
-             <summary>
 
-             Gets or sets the state of the fire instance.
 
-             </summary>
 
-             <value>The state of the fire instance.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.FiredTriggerRecord.JobRequestsRecovery">
 
-             <summary>
 
-             Gets or sets a value indicating whether [job requests recovery].
 
-             </summary>
 
-             <value><c>true</c> if [job requests recovery]; otherwise, <c>false</c>.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.FiredTriggerRecord.Priority">
 
-             <summary>
 
-             Gets or sets the priority.
 
-             </summary>
 
-             <value>The priority.</value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.InvalidConfigurationException">
 
-             <summary>
 
-             Exception class for when a driver delegate cannot be found for a given
 
-             configuration, or lack thereof.
 
-             </summary>
 
-             <author>  <a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.SchedulerException">
 
-             <summary> 
 
-             Base class for exceptions thrown by the Quartz <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-             <remarks>
 
-             SchedulerExceptions may contain a reference to another
 
-             <see cref="T:System.Exception"/>, which was the underlying cause of the SchedulerException.
 
-             </remarks>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerException.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.SchedulerException"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerException.#ctor(System.String)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.SchedulerException"/> class.
 
-             </summary>
 
-             <param name="msg">The MSG.</param>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.SchedulerException"/> class.
 
-             </summary>
 
-             <param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"></see> that holds the serialized object data about the exception being thrown.</param>
 
-             <param name="context">The <see cref="T:System.Runtime.Serialization.StreamingContext"></see> that contains contextual information about the source or destination.</param>
 
-             <exception cref="T:System.Runtime.Serialization.SerializationException">The class name is null or <see cref="P:System.Exception.HResult"></see> is zero (0). </exception>
 
-             <exception cref="T:System.ArgumentNullException">The info parameter is null. </exception>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerException.#ctor(System.Exception)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.SchedulerException"/> class.
 
-             </summary>
 
-             <param name="cause">The cause.</param>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerException.#ctor(System.String,System.Exception)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.SchedulerException"/> class.
 
-             </summary>
 
-             <param name="msg">The MSG.</param>
 
-             <param name="cause">The cause.</param>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerException.ToString">
 
-             <summary>
 
-             Creates and returns a string representation of the current exception.
 
-             </summary>
 
-             <returns>
 
-             A string representation of the current exception.
 
-             </returns>
 
-             <PermissionSet><IPermission class="System.Security.Permissions.FileIOPermission, mscorlib, Version=2.0.3600.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" PathDiscovery="*AllFiles*"/></PermissionSet>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.InvalidConfigurationException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.InvalidConfigurationException"/> class.
 
-             </summary>
 
-             <param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"></see> that holds the serialized object data about the exception being thrown.</param>
 
-             <param name="context">The <see cref="T:System.Runtime.Serialization.StreamingContext"></see> that contains contextual information about the source or destination.</param>
 
-             <exception cref="T:System.Runtime.Serialization.SerializationException">The class name is null or <see cref="P:System.Exception.HResult"></see> is zero (0). </exception>
 
-             <exception cref="T:System.ArgumentNullException">The info parameter is null. </exception>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.JobStoreCMT">
 
-             <summary>
 
-              <see cref="T:Quartz.Impl.AdoJobStore.JobStoreCMT"/> is meant to be used in an application-server
 
-              or other software framework environment that provides 
 
-              container-managed-transactions. No commit / rollback will be handled by this class.
 
-              </summary>
 
-              <remarks>
 
-              If you need commit / rollback, use <see cref="T:Quartz.Impl.AdoJobStore.JobStoreTX"/>
 
-              instead.
 
-              </remarks>
 
-              <author><a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-              <author>James House</author>
 
-              <author>Srinivas Venkatarangaiah</author>
 
-              <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.JobStoreSupport">
 
-             <summary>
 
-             Contains base functionality for ADO.NET-based JobStore implementations.
 
-             </summary>
 
-             <author><a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Spi.IJobStore">
 
-             <summary> 
 
-             The interface to be implemented by classes that want to provide a <see cref="T:Quartz.IJob"/>
 
-             and <see cref="T:Quartz.ITrigger"/> storage mechanism for the
 
-             <see cref="T:Quartz.Core.QuartzScheduler"/>'s use.
 
-             </summary>
 
-             <remarks>
 
-             Storage of <see cref="T:Quartz.IJob"/> s and <see cref="T:Quartz.ITrigger"/> s should be keyed
 
-             on the combination of their name and group for uniqueness.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.Core.QuartzScheduler"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.IJobDetail"/>
 
-             <seealso cref="T:Quartz.JobDataMap"/>
 
-             <seealso cref="T:Quartz.ICalendar"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.Initialize(Quartz.Spi.ITypeLoadHelper,Quartz.Spi.ISchedulerSignaler)">
 
-             <summary>
 
-             Called by the QuartzScheduler before the <see cref="T:Quartz.Spi.IJobStore"/> is
 
-             used, in order to give the it a chance to Initialize.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.SchedulerStarted">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the <see cref="T:Quartz.Spi.IJobStore"/> that
 
-             the scheduler has started.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.SchedulerPaused">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the JobStore that
 
-             the scheduler has been paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.SchedulerResumed">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the JobStore that
 
-             the scheduler has resumed after being paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.Shutdown">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the <see cref="T:Quartz.Spi.IJobStore"/> that
 
-             it should free up all of it's resources because the scheduler is
 
-             shutting down.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.StoreJobAndTrigger(Quartz.IJobDetail,Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.IJobDetail"/> and <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <param name="newJob">The <see cref="T:Quartz.IJobDetail"/> to be stored.</param>
 
-             <param name="newTrigger">The <see cref="T:Quartz.ITrigger"/> to be stored.</param>
 
-             <throws>  ObjectAlreadyExistsException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.IsJobGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given JobGroup is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.IsTriggerGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given TriggerGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.StoreJob(Quartz.IJobDetail,System.Boolean)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.IJobDetail"/>.
 
-             </summary>
 
-             <param name="newJob">The <see cref="T:Quartz.IJobDetail"/> to be stored.</param>
 
-             <param name="replaceExisting">
 
-             If <see langword="true"/>, any <see cref="T:Quartz.IJob"/> existing in the
 
-             <see cref="T:Quartz.Spi.IJobStore"/> with the same name and group should be
 
-             over-written.
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.RemoveJob(Quartz.JobKey)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.IJob"/> with the given
 
-             key, and any <see cref="T:Quartz.ITrigger"/> s that reference
 
-             it.
 
-             </summary>
 
-             <remarks>
 
-             If removal of the <see cref="T:Quartz.IJob"/> results in an empty group, the
 
-             group should be removed from the <see cref="T:Quartz.Spi.IJobStore"/>'s list of
 
-             known group names.
 
-             </remarks>
 
-             <returns>
 
-             	<see langword="true"/> if a <see cref="T:Quartz.IJob"/> with the given name and
 
-             group was found and removed from the store.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.RetrieveJob(Quartz.JobKey)">
 
-             <summary>
 
-             Retrieve the <see cref="T:Quartz.IJobDetail"/> for the given
 
-             <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-             <returns>
 
-             The desired <see cref="T:Quartz.IJob"/>, or null if there is no match.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.StoreTrigger(Quartz.Spi.IOperableTrigger,System.Boolean)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <param name="newTrigger">The <see cref="T:Quartz.ITrigger"/> to be stored.</param>
 
-             <param name="replaceExisting">If <see langword="true"/>, any <see cref="T:Quartz.ITrigger"/> existing in
 
-             the <see cref="T:Quartz.Spi.IJobStore"/> with the same name and group should
 
-             be over-written.</param>
 
-             <throws>  ObjectAlreadyExistsException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.RemoveTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.ITrigger"/> with the given key.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             If removal of the <see cref="T:Quartz.ITrigger"/> results in an empty group, the
 
-             group should be removed from the <see cref="T:Quartz.Spi.IJobStore"/>'s list of
 
-             known group names.
 
-             </para>
 
-             <para>
 
-             If removal of the <see cref="T:Quartz.ITrigger"/> results in an 'orphaned' <see cref="T:Quartz.IJob"/>
 
-             that is not 'durable', then the <see cref="T:Quartz.IJob"/> should be deleted
 
-             also.
 
-             </para>
 
-             </remarks>
 
-             <returns>
 
-             	<see langword="true"/> if a <see cref="T:Quartz.ITrigger"/> with the given
 
-             name and group was found and removed from the store.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.ReplaceTrigger(Quartz.TriggerKey,Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.ITrigger"/> with the
 
-             given name, and store the new given one - which must be associated
 
-             with the same job.
 
-             </summary>
 
-             <param name="triggerKey">The <see cref="T:Quartz.ITrigger"/> to be replaced.</param>
 
-             <param name="newTrigger">The new <see cref="T:Quartz.ITrigger"/> to be stored.</param>
 
-             <returns>
 
-             	<see langword="true"/> if a <see cref="T:Quartz.ITrigger"/> with the given
 
-             name and group was found and removed from the store.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.RetrieveTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Retrieve the given <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <returns>
 
-             The desired <see cref="T:Quartz.ITrigger"/>, or null if there is no
 
-             match.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.CalendarExists(System.String)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.ICalendar"/> with the given identifier already
 
-             exists within the scheduler.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="calName">the identifier to check for</param>
 
-             <returns>true if a calendar exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.CheckExists(Quartz.JobKey)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.IJob"/> with the given identifier already
 
-             exists within the scheduler.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="jobKey">the identifier to check for</param>
 
-             <returns>true if a job exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.CheckExists(Quartz.TriggerKey)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.ITrigger"/> with the given identifier already
 
-             exists within the scheduler.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="triggerKey">the identifier to check for</param>
 
-             <returns>true if a trigger exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.ClearAllSchedulingData">
 
-             <summary>
 
-             Clear (delete!) all scheduling data - all <see cref="T:Quartz.IJob"/>s, <see cref="T:Quartz.ITrigger"/>s
 
-             <see cref="T:Quartz.ICalendar"/>s.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.StoreCalendar(System.String,Quartz.ICalendar,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.ICalendar"/>.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="calendar">The <see cref="T:Quartz.ICalendar"/> to be stored.</param>
 
-             <param name="replaceExisting">If <see langword="true"/>, any <see cref="T:Quartz.ICalendar"/> existing
 
-             in the <see cref="T:Quartz.Spi.IJobStore"/> with the same name and group
 
-             should be over-written.</param>
 
-             <param name="updateTriggers">If <see langword="true"/>, any <see cref="T:Quartz.ITrigger"/>s existing
 
-             in the <see cref="T:Quartz.Spi.IJobStore"/> that reference an existing
 
-             Calendar with the same name with have their next fire time
 
-             re-computed with the new <see cref="T:Quartz.ICalendar"/>.</param>
 
-             <throws>  ObjectAlreadyExistsException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.RemoveCalendar(System.String)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.ICalendar"/> with the
 
-             given name.
 
-             </summary>
 
-             <remarks>
 
-             If removal of the <see cref="T:Quartz.ICalendar"/> would result in
 
-             <see cref="T:Quartz.ITrigger"/>s pointing to non-existent calendars, then a
 
-             <see cref="T:Quartz.JobPersistenceException"/> will be thrown.
 
-             </remarks>
 
-             <param name="calName">The name of the <see cref="T:Quartz.ICalendar"/> to be removed.</param>
 
-             <returns>
 
-             	<see langword="true"/> if a <see cref="T:Quartz.ICalendar"/> with the given name
 
-             was found and removed from the store.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.RetrieveCalendar(System.String)">
 
-             <summary>
 
-             Retrieve the given <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <param name="calName">The name of the <see cref="T:Quartz.ICalendar"/> to be retrieved.</param>
 
-             <returns>
 
-             The desired <see cref="T:Quartz.ICalendar"/>, or null if there is no
 
-             match.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetNumberOfJobs">
 
-             <summary>
 
-             Get the number of <see cref="T:Quartz.IJob"/>s that are
 
-             stored in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetNumberOfTriggers">
 
-             <summary>
 
-             Get the number of <see cref="T:Quartz.ITrigger"/>s that are
 
-             stored in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetNumberOfCalendars">
 
-             <summary>
 
-             Get the number of <see cref="T:Quartz.ICalendar"/> s that are
 
-             stored in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetJobKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.IJob"/> s that
 
-             have the given group name.
 
-             <para>
 
-             If there are no jobs in the given group name, the result should be a
 
-             zero-length array (not <see langword="null"/>).
 
-             </para>
 
-             </summary>
 
-             <param name="matcher"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetTriggerKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.ITrigger"/>s
 
-             that have the given group name.
 
-             <para>
 
-             If there are no triggers in the given group name, the result should be a
 
-             zero-length array (not <see langword="null"/>).
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetJobGroupNames">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.IJob"/>
 
-             groups.
 
-             <para>
 
-             If there are no known group names, the result should be a zero-length
 
-             array (not <see langword="null"/>).
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetTriggerGroupNames">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.ITrigger"/>
 
-             groups.
 
-             <para>
 
-             If there are no known group names, the result should be a zero-length
 
-             array (not <see langword="null"/>).
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetCalendarNames">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.ICalendar"/> s
 
-             in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             
 
-             <para>
 
-             If there are no Calendars in the given group name, the result should be
 
-             a zero-length array (not <see langword="null"/>).
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetTriggersForJob(Quartz.JobKey)">
 
-             <summary>
 
-             Get all of the Triggers that are associated to the given Job.
 
-             </summary>
 
-             <remarks>
 
-             If there are no matches, a zero-length array should be returned.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetTriggerState(Quartz.TriggerKey)">
 
-             <summary>
 
-             Get the current state of the identified <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <seealso cref="T:Quartz.TriggerState"/>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.PauseTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Pause the <see cref="T:Quartz.ITrigger"/> with the given key.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.ITrigger"/>s in the
 
-             given group.
 
-             </summary>
 
-             <remarks>
 
-             The JobStore should "remember" that the group is paused, and impose the
 
-             pause on any new triggers that are added to the group while the group is
 
-             paused.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.PauseJob(Quartz.JobKey)">
 
-             <summary>
 
-             Pause the <see cref="T:Quartz.IJob"/> with the given key - by
 
-             pausing all of its current <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.PauseJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.IJob"/>s in the given
 
-             group - by pausing all of their <see cref="T:Quartz.ITrigger"/>s.
 
-             <para>
 
-             The JobStore should "remember" that the group is paused, and impose the
 
-             pause on any new jobs that are added to the group while the group is
 
-             paused.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="T:System.String">
 
-             </seealso>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.ResumeTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Resume (un-pause) the <see cref="T:Quartz.ITrigger"/> with the
 
-             given key.
 
-             
 
-             <para>
 
-             If the <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="T:System.String">
 
-             </seealso>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Resume (un-pause) all of the <see cref="T:Quartz.ITrigger"/>s
 
-             in the given group.
 
-             <para>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetPausedTriggerGroups">
 
-             <summary>
 
-             Gets the paused trigger groups.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.ResumeJob(Quartz.JobKey)">
 
-             <summary> 
 
-             Resume (un-pause) the <see cref="T:Quartz.IJob"/> with the
 
-             given key.
 
-             <para>
 
-             If any of the <see cref="T:Quartz.IJob"/>'s<see cref="T:Quartz.ITrigger"/> s missed one
 
-             or more fire-times, then the <see cref="T:Quartz.ITrigger"/>'s misfire
 
-             instruction will be applied.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.ResumeJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Resume (un-pause) all of the <see cref="T:Quartz.IJob"/>s in
 
-             the given group.
 
-             <para>
 
-             If any of the <see cref="T:Quartz.IJob"/> s had <see cref="T:Quartz.ITrigger"/> s that
 
-             missed one or more fire-times, then the <see cref="T:Quartz.ITrigger"/>'s
 
-             misfire instruction will be applied.
 
-             </para> 
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.PauseAll">
 
-             <summary>
 
-             Pause all triggers - equivalent of calling <see cref="M:Quartz.Spi.IJobStore.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             on every group.
 
-             <para>
 
-             When <see cref="M:Quartz.Spi.IJobStore.ResumeAll"/> is called (to un-pause), trigger misfire
 
-             instructions WILL be applied.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="M:Quartz.Spi.IJobStore.ResumeAll"/>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.ResumeAll">
 
-             <summary>
 
-             Resume (un-pause) all triggers - equivalent of calling <see cref="M:Quartz.Spi.IJobStore.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             on every group.
 
-             <para>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </para>
 
-             
 
-             </summary>
 
-             <seealso cref="M:Quartz.Spi.IJobStore.PauseAll"/>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.AcquireNextTriggers(System.DateTimeOffset,System.Int32,System.TimeSpan)">
 
-             <summary>
 
-             Get a handle to the next trigger to be fired, and mark it as 'reserved'
 
-             by the calling scheduler.
 
-             </summary>
 
-             <param name="noLaterThan">If > 0, the JobStore should only return a Trigger
 
-             that will fire no later than the time represented in this value as
 
-             milliseconds.</param>
 
-             <param name="maxCount"></param>
 
-             <param name="timeWindow"></param>
 
-             <returns></returns>
 
-             <seealso cref="T:Quartz.ITrigger">
 
-             </seealso>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.ReleaseAcquiredTrigger(Quartz.Spi.IOperableTrigger)">
 
-             <summary> 
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> that the scheduler no longer plans to
 
-             fire the given <see cref="T:Quartz.ITrigger"/>, that it had previously acquired
 
-             (reserved).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.TriggersFired(System.Collections.Generic.IList{Quartz.Spi.IOperableTrigger})">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> that the scheduler is now firing the
 
-             given <see cref="T:Quartz.ITrigger"/> (executing its associated <see cref="T:Quartz.IJob"/>),
 
-             that it had previously acquired (reserved).
 
-             </summary>
 
-             <returns>
 
-             May return null if all the triggers or their calendars no longer exist, or
 
-             if the trigger was not successfully put into the 'executing'
 
-             state.  Preference is to return an empty list if none of the triggers
 
-             could be fired.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.TriggeredJobComplete(Quartz.Spi.IOperableTrigger,Quartz.IJobDetail,Quartz.SchedulerInstruction)">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> that the scheduler has completed the
 
-             firing of the given <see cref="T:Quartz.ITrigger"/> (and the execution its
 
-             associated <see cref="T:Quartz.IJob"/>), and that the <see cref="T:Quartz.JobDataMap"/>
 
-             in the given <see cref="T:Quartz.IJobDetail"/> should be updated if the <see cref="T:Quartz.IJob"/>
 
-             is stateful.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IJobStore.SupportsPersistence">
 
-             <summary>
 
-             Indicates whether job store supports persistence.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IJobStore.EstimatedTimeToReleaseAndAcquireTrigger">
 
-             <summary>
 
-             How long (in milliseconds) the <see cref="T:Quartz.Spi.IJobStore"/> implementation 
 
-             estimates that it will take to release a trigger and acquire a new one. 
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IJobStore.Clustered">
 
-             <summary>
 
-             Whether or not the <see cref="T:Quartz.Spi.IJobStore"/> implementation is clustered.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IJobStore.InstanceId">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> of the Scheduler instance's Id, 
 
-             prior to initialize being invoked.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IJobStore.InstanceName">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> of the Scheduler instance's name, 
 
-             prior to initialize being invoked.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IJobStore.ThreadPoolSize">
 
-             <summary>
 
-             Tells the JobStore the pool size used to execute jobs.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.JobStoreSupport"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetConnection">
 
-             <summary>
 
-             Gets the connection and starts a new transaction.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.Initialize(Quartz.Spi.ITypeLoadHelper,Quartz.Spi.ISchedulerSignaler)">
 
-             <summary>
 
-             Called by the QuartzScheduler before the <see cref="T:Quartz.Spi.IJobStore"/> is
 
-             used, in order to give it a chance to Initialize.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.SchedulerStarted">
 
-             <seealso cref="M:Quartz.Spi.IJobStore.SchedulerStarted"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.SchedulerPaused">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the JobStore that
 
-             the scheduler has been paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.SchedulerResumed">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the JobStore that
 
-             the scheduler has resumed after being paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.Shutdown">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the <see cref="T:Quartz.Spi.IJobStore"/> that
 
-             it should free up all of it's resources because the scheduler is
 
-             shutting down.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RecoverJobs">
 
-             <summary>
 
-             Will recover any failed or misfired jobs and clean up the data store as
 
-             appropriate.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RecoverJobs(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Will recover any failed or misfired jobs and clean up the data store as
 
-             appropriate.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.StoreJobAndTrigger(Quartz.IJobDetail,Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.IJobDetail"/> and <see cref="T:Quartz.Spi.IOperableTrigger"/>.
 
-             </summary>
 
-             <param name="newJob">Job to be stored.</param>
 
-             <param name="newTrigger">Trigger to be stored.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.IsJobGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given JobGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.IsTriggerGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given TriggerGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.StoreJob(Quartz.IJobDetail,System.Boolean)">
 
-             <summary>
 
-             Stores the given <see cref="T:Quartz.IJobDetail"/>.
 
-             </summary>
 
-             <param name="newJob">The <see cref="T:Quartz.IJobDetail"/> to be stored.</param>
 
-             <param name="replaceExisting">
 
-             If <see langword="true"/>, any <see cref="T:Quartz.IJob"/> existing in the
 
-             <see cref="T:Quartz.Spi.IJobStore"/> with the same name & group should be over-written.
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.StoreJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.IJobDetail,System.Boolean)">
 
-             <summary> <para>
 
-             Insert or update a job.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.JobExists(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Check existence of a given job.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.StoreTrigger(Quartz.Spi.IOperableTrigger,System.Boolean)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <param name="newTrigger">The <see cref="T:Quartz.ITrigger"/> to be stored.</param>
 
-             <param name="replaceExisting">
 
-             If <see langword="true"/>, any <see cref="T:Quartz.ITrigger"/> existing in
 
-             the <see cref="T:Quartz.Spi.IJobStore"/> with the same name & group should
 
-             be over-written.
 
-             </param>
 
-             <exception cref="T:Quartz.ObjectAlreadyExistsException">
 
-             if a <see cref="T:Quartz.ITrigger"/> with the same name/group already
 
-             exists, and replaceExisting is set to false.
 
-             </exception>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.StoreTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger,Quartz.IJobDetail,System.Boolean,System.String,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Insert or update a trigger.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.TriggerExists(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Check existence of a given trigger.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RemoveJob(Quartz.JobKey)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.IJob"/> with the given
 
-             name, and any <see cref="T:Quartz.ITrigger"/> s that reference
 
-             it.
 
-             </summary>
 
-             
 
-             <remarks>
 
-             If removal of the <see cref="T:Quartz.IJob"/> results in an empty group, the
 
-             group should be removed from the <see cref="T:Quartz.Spi.IJobStore"/>'s list of
 
-             known group names.
 
-             </remarks>
 
-             <returns>
 
-             <see langword="true"/> if a <see cref="T:Quartz.IJob"/> with the given name &
 
-             group was found and removed from the store.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.DeleteJobAndChildren(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Delete a job and its listeners.
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RemoveJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey,System.Boolean)"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RemoveTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,Quartz.IJobDetail)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.DeleteTriggerAndChildren(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Delete a trigger, its listeners, and its Simple/Cron/BLOB sub-table entry.
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RemoveJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey,System.Boolean)"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RemoveTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,Quartz.IJobDetail)"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ReplaceTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,Quartz.Spi.IOperableTrigger)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RetrieveJob(Quartz.JobKey)">
 
-             <summary>
 
-             Retrieve the <see cref="T:Quartz.IJobDetail"/> for the given
 
-             <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns>The desired <see cref="T:Quartz.IJob"/>, or null if there is no match.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RemoveTrigger(Quartz.TriggerKey)">
 
-              <summary>
 
-              Remove (delete) the <see cref="T:Quartz.ITrigger"/> with the
 
-              given name.
 
-              </summary>
 
-              
 
-              <remarks>
 
-              <para>
 
-              If removal of the <see cref="T:Quartz.ITrigger"/> results in an empty group, the
 
-              group should be removed from the <see cref="T:Quartz.Spi.IJobStore"/>'s list of
 
-              known group names.
 
-              </para>
 
-              
 
-              <para>
 
-              If removal of the <see cref="T:Quartz.ITrigger"/> results in an 'orphaned' <see cref="T:Quartz.IJob"/>
 
-              that is not 'durable', then the <see cref="T:Quartz.IJob"/> should be deleted
 
-              also.
 
-              </para>
 
-              </remarks>
 
-              <param name="triggerKey">The key identifying the trigger.</param>
 
-              <returns>
 
-              <see langword="true"/> if a <see cref="T:Quartz.ITrigger"/> with the given
 
-              name & group was found and removed from the store.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ReplaceTrigger(Quartz.TriggerKey,Quartz.Spi.IOperableTrigger)">
 
-             <see cref="M:Quartz.Spi.IJobStore.ReplaceTrigger(Quartz.TriggerKey,Quartz.Spi.IOperableTrigger)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RetrieveTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Retrieve the given <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <returns>The desired <see cref="T:Quartz.ITrigger"/>, or null if there is no match.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetTriggerState(Quartz.TriggerKey)">
 
-             <summary>
 
-             Get the current state of the identified <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <seealso cref="F:Quartz.TriggerState.Normal"/>
 
-             <seealso cref="F:Quartz.TriggerState.Paused"/>
 
-             <seealso cref="F:Quartz.TriggerState.Complete"/>
 
-             <seealso cref="F:Quartz.TriggerState.Error"/>
 
-             <seealso cref="F:Quartz.TriggerState.None"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetTriggerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Gets the state of the trigger.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.StoreCalendar(System.String,Quartz.ICalendar,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.ICalendar"/>.
 
-             </summary>
 
-             <param name="calName">The name of the calendar.</param>
 
-             <param name="calendar">The <see cref="T:Quartz.ICalendar"/> to be stored.</param>
 
-             <param name="replaceExisting">
 
-             If <see langword="true"/>, any <see cref="T:Quartz.ICalendar"/> existing
 
-             in the <see cref="T:Quartz.Spi.IJobStore"/> with the same name & group
 
-             should be over-written.
 
-             </param>
 
-             <param name="updateTriggers"></param>
 
-             <exception cref="T:Quartz.ObjectAlreadyExistsException">
 
-                       if a <see cref="T:Quartz.ICalendar"/> with the same name already
 
-                       exists, and replaceExisting is set to false.
 
-             </exception>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RemoveCalendar(System.String)">
 
-              <summary>
 
-              Remove (delete) the <see cref="T:Quartz.ICalendar"/> with the given name.
 
-              </summary>
 
-              <remarks>
 
-              If removal of the <see cref="T:Quartz.ICalendar"/> would result in
 
-              <see cref="T:Quartz.ITrigger"/>s pointing to non-existent calendars, then a
 
-              <see cref="T:Quartz.JobPersistenceException"/> will be thrown.
 
-              </remarks>
 
-              <param name="calName">The name of the <see cref="T:Quartz.ICalendar"/> to be removed.</param>
 
-              <returns>
 
-              <see langword="true"/> if a <see cref="T:Quartz.ICalendar"/> with the given name
 
-              was found and removed from the store.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RetrieveCalendar(System.String)">
 
-             <summary>
 
-             Retrieve the given <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <param name="calName">The name of the <see cref="T:Quartz.ICalendar"/> to be retrieved.</param>
 
-             <returns>The desired <see cref="T:Quartz.ICalendar"/>, or null if there is no match.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetNumberOfJobs">
 
-             <summary>
 
-             Get the number of <see cref="T:Quartz.IJob"/> s that are
 
-             stored in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetNumberOfTriggers">
 
-             <summary>
 
-             Get the number of <see cref="T:Quartz.ITrigger"/> s that are
 
-             stored in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetNumberOfCalendars">
 
-             <summary>
 
-             Get the number of <see cref="T:Quartz.ICalendar"/> s that are
 
-             stored in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetJobKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.IJob"/> s that
 
-             have the given group name.
 
-             </summary>
 
-             <remarks>
 
-             If there are no jobs in the given group name, the result should be a
 
-             zero-length array (not <see langword="null"/>).
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.CalendarExists(System.String)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.ICalendar"/> with the given identifier already
 
-             exists within the scheduler.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="calName">the identifier to check for</param>
 
-             <returns>true if a calendar exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.CheckExists(Quartz.JobKey)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.IJob"/> with the given identifier already
 
-             exists within the scheduler.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="jobKey">the identifier to check for</param>
 
-             <returns>true if a Job exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.CheckExists(Quartz.TriggerKey)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.ITrigger"/> with the given identifier already
 
-             exists within the scheduler.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="triggerKey">the identifier to check for</param>
 
-             <returns>true if a Trigger exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ClearAllSchedulingData">
 
-             <summary>
 
-             Clear (delete!) all scheduling data - all <see cref="T:Quartz.IJob"/>s, <see cref="T:Quartz.ITrigger"/>s
 
-             <see cref="T:Quartz.ICalendar"/>s.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetTriggerKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.ITrigger"/> s
 
-             that have the given group name.
 
-             </summary>
 
-             <remarks>
 
-             If there are no triggers in the given group name, the result should be a
 
-             zero-length array (not <see langword="null"/>).
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetJobGroupNames">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.IJob"/>
 
-             groups.
 
-             </summary>
 
-             
 
-             <remarks>
 
-             If there are no known group names, the result should be a zero-length
 
-             array (not <see langword="null"/>).
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetTriggerGroupNames">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.ITrigger"/>
 
-             groups.
 
-             </summary>
 
-             
 
-             <remarks>
 
-             If there are no known group names, the result should be a zero-length
 
-             array (not <see langword="null"/>).
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetCalendarNames">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.ICalendar"/> s
 
-             in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </summary>
 
-             <remarks>
 
-             If there are no Calendars in the given group name, the result should be
 
-             a zero-length array (not <see langword="null"/>).
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetTriggersForJob(Quartz.JobKey)">
 
-             <summary>
 
-             Get all of the Triggers that are associated to the given Job.
 
-             </summary>
 
-             <remarks>
 
-             If there are no matches, a zero-length array should be returned.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Pause the <see cref="T:Quartz.ITrigger"/> with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Pause the <see cref="T:Quartz.ITrigger"/> with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseJob(Quartz.JobKey)">
 
-             <summary>
 
-             Pause the <see cref="T:Quartz.IJob"/> with the given name - by
 
-             pausing all of its current <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeJob(Quartz.JobKey)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.IJob"/>s in the given
 
-             group - by pausing all of their <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.CheckBlockedState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey,System.String)">
 
-             <summary>
 
-             Determines if a Trigger for the given job should be blocked.  
 
-             State can only transition to StatePausedBlocked/StateBlocked from 
 
-             StatePaused/StateWaiting respectively.
 
-             </summary>
 
-             <returns>StatePausedBlocked, StateBlocked, or the currentState. </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Resume (un-pause) the <see cref="T:Quartz.ITrigger"/> with the
 
-             given name.
 
-             </summary>
 
-             <remarks>
 
-             If the <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeJob(Quartz.JobKey)">
 
-             <summary>
 
-             Resume (un-pause) the <see cref="T:Quartz.IJob"/> with the
 
-             given name.
 
-             </summary>
 
-             <remarks>
 
-             If any of the <see cref="T:Quartz.IJob"/>'s <see cref="T:Quartz.ITrigger"/> s missed one
 
-             or more fire-times, then the <see cref="T:Quartz.ITrigger"/>'s misfire
 
-             instruction will be applied.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseJob(Quartz.JobKey)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Resume (un-pause) all of the <see cref="T:Quartz.IJob"/>s in
 
-             the given group.
 
-             </summary>
 
-             <remarks>
 
-             If any of the <see cref="T:Quartz.IJob"/> s had <see cref="T:Quartz.ITrigger"/> s that
 
-             missed one or more fire-times, then the <see cref="T:Quartz.ITrigger"/>'s
 
-             misfire instruction will be applied.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.ITrigger"/>s in the given group.
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseTriggerGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.ITrigger"/>s in the given group.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetPausedTriggerGroups(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary> 
 
-             Pause all of the <see cref="T:Quartz.ITrigger"/>s in the
 
-             given group.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeTriggers(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Resume (un-pause) all of the <see cref="T:Quartz.ITrigger"/>s
 
-             in the given group.
 
-             <para>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseAll(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Pause all triggers - equivalent of calling <see cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             on every group.
 
-             <para>
 
-             When <see cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeAll"/> is called (to un-pause), trigger misfire
 
-             instructions WILL be applied.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeAll"/>
 
-             <seealso cref="T:System.String"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeAll">
 
-             <summary>
 
-             Resume (un-pause) all triggers - equivalent of calling <see cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             on every group.
 
-             </summary>
 
-             <remarks>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseAll"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeAll(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Resume (un-pause) all triggers - equivalent of calling <see cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             on every group.
 
-             <para>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseAll"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.AcquireNextTriggers(System.DateTimeOffset,System.Int32,System.TimeSpan)">
 
-             <summary>
 
-             Get a handle to the next N triggers to be fired, and mark them as 'reserved'
 
-             by the calling scheduler.
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ReleaseAcquiredTrigger(Quartz.Spi.IOperableTrigger)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ReleaseAcquiredTrigger(Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> that the scheduler no longer plans to
 
-             fire the given <see cref="T:Quartz.ITrigger"/>, that it had previously acquired
 
-             (reserved).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.TriggeredJobComplete(Quartz.Spi.IOperableTrigger,Quartz.IJobDetail,Quartz.SchedulerInstruction)">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> that the scheduler has completed the
 
-             firing of the given <see cref="T:Quartz.ITrigger"/> (and the execution its
 
-             associated <see cref="T:Quartz.IJob"/>), and that the <see cref="T:Quartz.JobDataMap"/>
 
-             in the given <see cref="T:Quartz.IJobDetail"/> should be updated if the <see cref="T:Quartz.IJob"/>
 
-             is stateful.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.FindFailedInstances(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Get a list of all scheduler instances in the cluster that may have failed.
 
-             This includes this scheduler if it is checking in for the first time.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.FindOrphanedFailedInstances(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.Collections.Generic.IList{Quartz.Impl.AdoJobStore.SchedulerStateRecord})">
 
-             <summary>
 
-             Create dummy <see cref="T:Quartz.Impl.AdoJobStore.SchedulerStateRecord"/> objects for fired triggers
 
-             that have no scheduler state record.  Checkin timestamp and interval are
 
-             left as zero on these dummy <see cref="T:Quartz.Impl.AdoJobStore.SchedulerStateRecord"/> objects.
 
-             </summary>
 
-             <param name="conn"></param>
 
-             <param name="schedulerStateRecords">List of all current <see cref="T:Quartz.Impl.AdoJobStore.SchedulerStateRecord"/>s</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.CleanupConnection(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Cleanup the given database connection.  This means restoring
 
-             any modified auto commit or transaction isolation connection
 
-             attributes, and then closing the underlying connection.
 
-             </summary>
 
-             
 
-             <remarks>
 
-             This is separate from closeConnection() because the Spring 
 
-             integration relies on being able to overload closeConnection() and
 
-             expects the same connection back that it originally returned
 
-             from the datasource. 
 
-             </remarks>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.CloseConnection(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.CloseConnection(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary> 
 
-             Closes the supplied connection.
 
-             </summary>
 
-             <param name="cth">(Optional)</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RollbackConnection(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Rollback the supplied connection.
 
-             </summary>
 
-             <param name="cth">(Optional)
 
-             </param>
 
-             <throws>  JobPersistenceException thrown if a SQLException occurs when the </throws>
 
-             <summary> connection is rolled back
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.CommitConnection(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.Boolean)">
 
-             <summary>
 
-             Commit the supplied connection.
 
-             </summary>
 
-             <param name="cth">The CTH.</param>
 
-             <param name="openNewTransaction">if set to <c>true</c> opens a new transaction.</param>
 
-             <throws>JobPersistenceException thrown if a SQLException occurs when the </throws>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ExecuteWithoutLock``1(System.Func{Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,``0})">
 
-             <summary>
 
-             Execute the given callback in a transaction. Depending on the JobStore, 
 
-             the surrounding transaction may be assumed to be already present 
 
-             (managed).  
 
-             </summary>
 
-             <remarks>
 
-             This method just forwards to ExecuteInLock() with a null lockName.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ExecuteInLock``1(System.String,System.Func{Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,``0})">
 
-             <summary>
 
-             Execute the given callback having acquired the given lock.  
 
-             Depending on the JobStore, the surrounding transaction may be 
 
-             assumed to be already present (managed).
 
-             </summary> 
 
-             <param name="lockName">
 
-             The name of the lock to acquire, for example 
 
-             "TRIGGER_ACCESS".  If null, then no lock is acquired, but the
 
-             lockCallback is still executed in a transaction. 
 
-             </param>
 
-             <param name="txCallback">
 
-             The callback to excute after having acquired the given lock.
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ExecuteInNonManagedTXLock``1(System.String,System.Func{Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,``0},System.Func{Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,``0,System.Boolean})">
 
-             <summary>
 
-             Execute the given callback having optionally acquired the given lock.
 
-             This uses the non-managed transaction connection.
 
-             </summary>
 
-             <param name="lockName">
 
-             The name of the lock to acquire, for example 
 
-             "TRIGGER_ACCESS".  If null, then no lock is acquired, but the
 
-             lockCallback is still executed in a non-managed transaction. 
 
-             </param>
 
-             <param name="txCallback">
 
-             The callback to excute after having acquired the given lock.
 
-             </param>
 
-             <param name="txValidator"></param>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.DataSource">
 
-             <summary> 
 
-             Get or set the datasource name.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.ConnectionManager">
 
-             <summary> 
 
-             Get or set the database connection manager.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.Log">
 
-             <summary>
 
-             Gets the log.
 
-             </summary>
 
-             <value>The log.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.TablePrefix">
 
-             <summary> 
 
-             Get or sets the prefix that should be pre-pended to all table names.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.UseProperties">
 
-             <summary>
 
-             Set whether string-only properties will be handled in JobDataMaps.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.InstanceId">
 
-             <summary>
 
-             Get or set the instance Id of the Scheduler (must be unique within a cluster).
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.InstanceName">
 
-             <summary>
 
-             Get or set the instance Id of the Scheduler (must be unique within this server instance).
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.RetryableActionErrorLogThreshold">
 
-             <summary>
 
-             Gets or sets the number of retries before an error is logged for recovery operations.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.Clustered">
 
-             <summary> 
 
-             Get or set whether this instance is part of a cluster.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.ClusterCheckinInterval">
 
-             <summary>
 
-             Get or set the frequency at which this instance "checks-in"
 
-             with the other instances of the cluster. -- Affects the rate of
 
-             detecting failed instances.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.MaxMisfiresToHandleAtATime">
 
-             <summary>
 
-             Get or set the maximum number of misfired triggers that the misfire handling
 
-             thread will try to recover at one time (within one transaction).  The
 
-             default is 20.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.DbRetryInterval">
 
-             <summary>
 
-             Gets or sets the database retry interval.
 
-             </summary>
 
-             <value>The db retry interval.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.UseDBLocks">
 
-             <summary>
 
-             Get or set whether this instance should use database-based thread
 
-             synchronization.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.LockOnInsert">
 
-             <summary> 
 
-             Whether or not to obtain locks when inserting new jobs/triggers.  
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             Defaults to <see langword="true" />, which is safest - some db's (such as 
 
-             MS SQLServer) seem to require this to avoid deadlocks under high load,
 
-             while others seem to do fine without.  Settings this to false means 
 
-             isolation guarantees between job scheduling and trigger acquisition are
 
-             entirely enforced by the database.  Depending on the database and it's
 
-             configuration this may cause unusual scheduling behaviors.
 
-             </para>
 
-             <para>
 
-             Setting this property to <see langword="false" /> will provide a 
 
-             significant performance increase during the addition of new jobs 
 
-             and triggers.
 
-             </para>
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.MisfireThreshold">
 
-             <summary> 
 
-             The time span by which a trigger must have missed its
 
-             next-fire-time, in order for it to be considered "misfired" and thus
 
-             have its misfire instruction applied.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.DontSetAutoCommitFalse">
 
-             <summary> 
 
-             Don't call set autocommit(false) on connections obtained from the
 
-             DataSource. This can be helpfull in a few situations, such as if you
 
-             have a driver that complains if it is called when it is already off.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.TxIsolationLevelSerializable">
 
-             <summary> 
 
-             Set the transaction isolation level of DB connections to sequential.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.AcquireTriggersWithinLock">
 
-             <summary>
 
-             Whether or not the query and update to acquire a Trigger for firing
 
-             should be performed after obtaining an explicit DB lock (to avoid 
 
-             possible race conditions on the trigger's db row).  This is
 
-             is considered unnecessary for most databases (due to the nature of
 
-              the SQL update that is performed), and therefore a superfluous performance hit.
 
-             </summary>
 
-             <remarks>
 
-             However, if batch acquisition is used, it is important for this behavior 
 
-             to be used for all dbs.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.DriverDelegateType">
 
-             <summary> 
 
-             Get or set the ADO.NET driver delegate class name.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.DriverDelegateInitString">
 
-             <summary>
 
-             The driver delegate's initialization string.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.SelectWithLockSQL">
 
-             <summary>
 
-             set the SQL statement to use to select and lock a row in the "locks"
 
-             table.
 
-             </summary>
 
-             <seealso cref="T:Quartz.Impl.AdoJobStore.StdRowLockSemaphore"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.MakeThreadsDaemons">
 
-             <summary>
 
-             Get whether the threads spawned by this JobStore should be
 
-             marked as daemon.  Possible threads include the <see cref="T:Quartz.Impl.AdoJobStore.JobStoreSupport.MisfireHandler"/> 
 
-             and the <see cref="T:Quartz.Impl.AdoJobStore.JobStoreSupport.ClusterManager"/>.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.DoubleCheckLockMisfireHandler">
 
-             <summary>
 
-             Get whether to check to see if there are Triggers that have misfired
 
-             before actually acquiring the lock to recover them.  This should be 
 
-             set to false if the majority of the time, there are are misfired
 
-             Triggers.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.Delegate">
 
-             <summary>
 
-             Get the driver delegate for DB operations.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.CanUseProperties">
 
-             <summary>
 
-             Get whether String-only properties will be handled in JobDataMaps.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.SupportsPersistence">
 
-             <summary>
 
-             Indicates whether this job store supports persistence.
 
-             </summary>
 
-             <value></value>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Spi.ITypeLoadHelper">
 
-             <summary> 
 
-             An interface for classes wishing to provide the service of loading classes
 
-             and resources within the scheduler...
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ITypeLoadHelper.Initialize">
 
-             <summary> 
 
-             Called to give the ClassLoadHelper a chance to Initialize itself,
 
-             including the oportunity to "steal" the class loader off of the calling
 
-             thread, which is the thread that is initializing Quartz.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ITypeLoadHelper.LoadType(System.String)">
 
-             <summary> 
 
-             Return the class with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ITypeLoadHelper.GetResource(System.String)">
 
-             <summary> 
 
-             Finds a resource with a given name. This method returns null if no
 
-             resource with this name is found.
 
-             </summary>
 
-             <param name="name">name of the desired resource
 
-             </param>
 
-             <returns> a java.net.URL object
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ITypeLoadHelper.GetResourceAsStream(System.String)">
 
-             <summary> 
 
-             Finds a resource with a given name. This method returns null if no
 
-             resource with this name is found.
 
-             </summary>
 
-             <param name="name">name of the desired resource
 
-             </param>
 
-             <returns> a java.io.InputStream object
 
-             </returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.JobStoreSupport.RecoverMisfiredJobsResult">
 
-             <summary>
 
-             Helper class for returning the composite result of trying
 
-             to recover misfired jobs.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RecoverMisfiredJobsResult.#ctor(System.Boolean,System.Int32,System.DateTimeOffset)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.JobStoreSupport.RecoverMisfiredJobsResult"/> class.
 
-             </summary>
 
-             <param name="hasMoreMisfiredTriggers">if set to <c>true</c> [has more misfired triggers].</param>
 
-             <param name="processedMisfiredTriggerCount">The processed misfired trigger count.</param>
 
-             <param name="earliestNewTimeUtc"></param>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.RecoverMisfiredJobsResult.HasMoreMisfiredTriggers">
 
-             <summary>
 
-             Gets a value indicating whether this instance has more misfired triggers.
 
-             </summary>
 
-             <value>
 
-             	<c>true</c> if this instance has more misfired triggers; otherwise, <c>false</c>.
 
-             </value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.RecoverMisfiredJobsResult.ProcessedMisfiredTriggerCount">
 
-             <summary>
 
-             Gets the processed misfired trigger count.
 
-             </summary>
 
-             <value>The processed misfired trigger count.</value>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreCMT.Initialize(Quartz.Spi.ITypeLoadHelper,Quartz.Spi.ISchedulerSignaler)">
 
-             <summary>
 
-             Called by the QuartzScheduler before the <see cref="T:Quartz.Spi.IJobStore"/> is
 
-             used, in order to give the it a chance to Initialize.
 
-             </summary>
 
-             <param name="loadHelper"></param>
 
-             <param name="signaler"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreCMT.Shutdown">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the <see cref="T:Quartz.Spi.IJobStore"/> that
 
-             it should free up all of it's resources because the scheduler is
 
-             shutting down.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreCMT.GetNonManagedTXConnection">
 
-             <summary>
 
-             Gets the non managed TX connection.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreCMT.ExecuteInLock``1(System.String,System.Func{Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,``0})">
 
-             <summary>
 
-             Execute the given callback having optionally acquired the given lock.  
 
-             Because CMT assumes that the connection is already part of a managed
 
-             transaction, it does not attempt to commit or rollback the 
 
-             enclosing transaction.
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ExecuteInNonManagedTXLock(System.String,System.Action{Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder})"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ExecuteInLock(System.String,System.Action{Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder})"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetNonManagedTXConnection"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetConnection"/>
 
-             <param name="lockName">
 
-             The name of the lock to acquire, for example 
 
-             "TRIGGER_ACCESS".  If null, then no lock is acquired, but the
 
-             txCallback is still executed in a transaction.
 
-             </param>
 
-             <param name="txCallback">Callback to execute.</param>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreCMT.OpenConnection">
 
-             <summary>
 
-             Instructs this job store whether connections should be automatically opened.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.JobStoreTX">
 
-             <summary>
 
-             <see cref="T:Quartz.Impl.AdoJobStore.JobStoreTX"/> is meant to be used in a standalone environment.
 
-             Both commit and rollback will be handled by this class.
 
-             </summary>
 
-             <author><a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreTX.Initialize(Quartz.Spi.ITypeLoadHelper,Quartz.Spi.ISchedulerSignaler)">
 
-             <summary>
 
-             Called by the QuartzScheduler before the <see cref="T:Quartz.Spi.IJobStore"/> is
 
-             used, in order to give the it a chance to Initialize.
 
-             </summary>
 
-             <param name="loadHelper"></param>
 
-             <param name="signaler"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreTX.GetNonManagedTXConnection">
 
-             <summary>
 
-             For <see cref="T:Quartz.Impl.AdoJobStore.JobStoreTX"/>, the non-managed TX connection is just 
 
-             the normal connection because it is not CMT.
 
-             </summary> 
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetConnection"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreTX.ExecuteInLock``1(System.String,System.Func{Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,``0})">
 
-             <summary>
 
-             Execute the given callback having optionally aquired the given lock.
 
-             For <see cref="T:Quartz.Impl.AdoJobStore.JobStoreTX"/>, because it manages its own transactions
 
-             and only has the one datasource, this is the same behavior as 
 
-             <see cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ExecuteInNonManagedTXLock(System.String,System.Action{Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder})"/>.
 
-             </summary>
 
-             <param name="lockName">
 
-             The name of the lock to aquire, for example "TRIGGER_ACCESS". 
 
-             If null, then no lock is aquired, but the lockCallback is still
 
-             executed in a transaction.
 
-             </param>
 
-             <param name="txCallback">Callback to execute.</param>
 
-             <returns></returns>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ExecuteInNonManagedTXLock(System.String,System.Action{Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder})"/>
 
-             <sssseealso crsef="JobStoreCMT.ExecuteInLock(string, ITransactionCallback)"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetNonManagedTXConnection"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetConnection"/>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.LockException">
 
-             <summary>
 
-             Exception class for when there is a failure obtaining or releasing a
 
-             resource lock.
 
-             </summary>
 
-             <seealso cref="T:Quartz.Impl.AdoJobStore.ISemaphore"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.JobPersistenceException">
 
-             <summary>
 
-             An exception that is thrown to indicate that there has been a failure in the
 
-             scheduler's underlying persistence mechanism.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.JobPersistenceException.#ctor(System.String)">
 
-             <summary> <para>
 
-             Create a <see cref="T:Quartz.JobPersistenceException"/> with the given message.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobPersistenceException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.JobPersistenceException"/> class.
 
-             </summary>
 
-             <param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"></see> that holds the serialized object data about the exception being thrown.</param>
 
-             <param name="context">The <see cref="T:System.Runtime.Serialization.StreamingContext"></see> that contains contextual information about the source or destination.</param>
 
-             <exception cref="T:System.Runtime.Serialization.SerializationException">The class name is null or <see cref="P:System.Exception.HResult"></see> is zero (0). </exception>
 
-             <exception cref="T:System.ArgumentNullException">The info parameter is null. </exception>
 
-         </member>
 
-         <member name="M:Quartz.JobPersistenceException.#ctor(System.String,System.Exception)">
 
-             <summary> <para>
 
-             Create a <see cref="T:Quartz.JobPersistenceException"/> with the given message
 
-             and cause.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.LockException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.LockException"/> class.
 
-             </summary>
 
-             <param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"></see> that holds the serialized object data about the exception being thrown.</param>
 
-             <param name="context">The <see cref="T:System.Runtime.Serialization.StreamingContext"></see> that contains contextual information about the source or destination.</param>
 
-             <exception cref="T:System.Runtime.Serialization.SerializationException">The class name is null or <see cref="P:System.Exception.HResult"></see> is zero (0). </exception>
 
-             <exception cref="T:System.ArgumentNullException">The info parameter is null. </exception>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.MySQLDelegate">
 
-             <summary>
 
-             This is a driver delegate for the MySQL ADO.NET driver.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.MySQLDelegate.GetSelectNextTriggerToAcquireSql(System.Int32)">
 
-             <summary>
 
-             Gets the select next trigger to acquire SQL clause.
 
-             MySQL version with LIMIT support.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.NoSuchDelegateException">
 
-             <summary>
 
-             Exception class for when a driver delegate cannot be found for a given
 
-             configuration, or lack thereof.
 
-             </summary>
 
-             <author><a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.NoSuchDelegateException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.NoSuchDelegateException"/> class.
 
-             </summary>
 
-             <param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"></see> that holds the serialized object data about the exception being thrown.</param>
 
-             <param name="context">The <see cref="T:System.Runtime.Serialization.StreamingContext"></see> that contains contextual information about the source or destination.</param>
 
-             <exception cref="T:System.Runtime.Serialization.SerializationException">The class name is null or <see cref="P:System.Exception.HResult"></see> is zero (0). </exception>
 
-             <exception cref="T:System.ArgumentNullException">The info parameter is null. </exception>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.OracleDelegate">
 
-             <summary>
 
-             This is a driver delegate for the Oracle database.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.OracleDelegate.GetSelectNextTriggerToAcquireSql(System.Int32)">
 
-             <summary>
 
-             Creates the SQL for select next trigger to acquire.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.OracleDelegate.GetDbBooleanValue(System.Boolean)">
 
-             <summary>
 
-             Gets the db presentation for boolean value. For Oracle we use true/false of "1"/"0".
 
-             </summary>
 
-             <param name="booleanValue">Value to map to database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.SchedulerStateRecord">
 
-             <summary>
 
-             Conveys a scheduler-instance state record.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.SchedulerStateRecord.CheckinInterval">
 
-             <summary>
 
-             Gets or sets the checkin interval.
 
-             </summary>
 
-             <value>The checkin interval.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.SchedulerStateRecord.CheckinTimestamp">
 
-             <summary>
 
-             Gets or sets the checkin timestamp.
 
-             </summary>
 
-             <value>The checkin timestamp.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.SchedulerStateRecord.SchedulerInstanceId">
 
-             <summary>
 
-             Gets or sets the scheduler instance id.
 
-             </summary>
 
-             <value>The scheduler instance id.</value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.SimpleSemaphore">
 
-             <summary> 
 
-             Internal in-memory lock handler for providing thread/resource locking in 
 
-             order to protect resources from being altered by multiple threads at the 
 
-             same time.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.SimpleSemaphore.ObtainLock(Quartz.Impl.AdoJobStore.Common.DbMetadata,Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary> 
 
-             Grants a lock on the identified resource to the calling thread (blocking
 
-             until it is available).
 
-             </summary>
 
-             <returns>True if the lock was obtained.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.SimpleSemaphore.ReleaseLock(System.String)">
 
-             <summary> Release the lock on the identified resource if it is held by the calling
 
-             thread.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.SimpleSemaphore.IsLockOwner(System.String)">
 
-             <summary> 
 
-             Determine whether the calling thread owns a lock on the identified
 
-             resource.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.SimpleSemaphore.ThreadLocks">
 
-             <summary>
 
-             Gets the thread locks.
 
-             </summary>
 
-             <value>The thread locks.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.SimpleSemaphore.RequiresConnection">
 
-             <summary>
 
-             Whether this Semaphore implementation requires a database connection for
 
-             its lock management operations.
 
-             </summary>
 
-             <value></value>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.SimpleSemaphore.IsLockOwner(System.String)"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.SimpleSemaphore.ObtainLock(Quartz.Impl.AdoJobStore.Common.DbMetadata,Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.SimpleSemaphore.ReleaseLock(System.String)"/>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.SQLiteDelegate">
 
-             <summary>
 
-             This is a driver delegate for the SQLiteDelegate ADO.NET driver.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.SQLiteDelegate.GetSelectNextTriggerToAcquireSql(System.Int32)">
 
-             <summary>
 
-             Gets the select next trigger to acquire SQL clause.
 
-             SQLite version with LIMIT support.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.SqlServerDelegate">
 
-             <summary>
 
-             A SQL Server specific driver delegate.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.SqlServerDelegate.GetSelectNextTriggerToAcquireSql(System.Int32)">
 
-             <summary>
 
-             Gets the select next trigger to acquire SQL clause.
 
-             SQL Server specific version with TOP functionality
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.StdRowLockSemaphore">
 
-             <summary> 
 
-             Internal database based lock handler for providing thread/resource locking 
 
-             in order to protect resources from being altered by multiple threads at the 
 
-             same time.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdRowLockSemaphore.#ctor(Quartz.Impl.AdoJobStore.Common.IDbProvider)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.StdRowLockSemaphore"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdRowLockSemaphore.#ctor(System.String,System.String,System.String,Quartz.Impl.AdoJobStore.Common.IDbProvider)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.StdRowLockSemaphore"/> class.
 
-             </summary>
 
-             <param name="tablePrefix">The table prefix.</param>
 
-             <param name="schedName">the scheduler name</param>
 
-             <param name="selectWithLockSQL">The select with lock SQL.</param>
 
-             <param name="dbProvider"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdRowLockSemaphore.ExecuteSQL(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String,System.String)">
 
-             <summary>
 
-             Execute the SQL select for update that will lock the proper database row.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.TriggerPropertyBundle">
 
-             <summary>
 
-             Property name and value holder for trigger state data.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.TriggerStatus">
 
-             <summary>
 
-             Object representing a job or trigger key.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.TriggerStatus.#ctor(System.String,System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Construct a new TriggerStatus with the status name and nextFireTime.
 
-             </summary>
 
-             <param name="status">The trigger's status</param>
 
-             <param name="nextFireTime">The next time trigger will fire</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.TriggerStatus.ToString">
 
-             <summary>
 
-             Return the string representation of the TriggerStatus.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.UpdateLockRowSemaphore">
 
-             <summary>
 
-             Provide thread/resource locking in order to protect
 
-             resources from being altered by multiple threads at the same time using
 
-             a db row update.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             <b>Note:</b> This Semaphore implementation is useful for databases that do
 
-             not support row locking via "SELECT FOR UPDATE" or SQL Server's type syntax.
 
-             </para>
 
-             <para>
 
-             As of Quartz.NET 2.0 version there is no need to use this implementation for 
 
-             SQL Server databases.
 
-             </para>
 
-             </remarks>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.UpdateLockRowSemaphore.#ctor(Quartz.Impl.AdoJobStore.Common.IDbProvider)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.UpdateLockRowSemaphore"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.UpdateLockRowSemaphore.ExecuteSQL(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String,System.String)">
 
-             <summary>
 
-             Execute the SQL that will lock the proper database row.
 
-             </summary>
 
-             <param name="conn"></param>
 
-             <param name="lockName"></param>
 
-             <param name="expandedSQL"></param>
 
-             <param name="expandedInsertSQL"></param>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Calendar.AnnualCalendar">
 
-             <summary>
 
-             This implementation of the Calendar excludes a set of days of the year. You
 
-             may use it to exclude bank holidays which are on the same date every year.
 
-             </summary>
 
-             <seealso cref="T:Quartz.ICalendar"/>
 
-             <seealso cref="T:Quartz.Impl.Calendar.BaseCalendar"/>
 
-             <author>Juergen Donnerstag</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Calendar.BaseCalendar">
 
-             <summary>
 
-             This implementation of the Calendar may be used (you don't have to) as a
 
-             base class for more sophisticated one's. It merely implements the base
 
-             functionality required by each Calendar.
 
-             </summary>
 
-             <remarks>
 
-             Regarded as base functionality is the treatment of base calendars. Base
 
-             calendar allow you to chain (stack) as much calendars as you may need. For
 
-             example to exclude weekends you may use WeeklyCalendar. In order to exclude
 
-             holidays as well you may define a WeeklyCalendar instance to be the base
 
-             calendar for HolidayCalendar instance.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.ICalendar"/> 
 
-             <author>Juergen Donnerstag</author>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.ICalendar">
 
-             <summary> 
 
-             An interface to be implemented by objects that define spaces of time during 
 
-             which an associated <see cref="T:Quartz.ITrigger"/> may (not) fire. Calendars 
 
-             do not define actual fire times, but rather are used to limit a 
 
-             <see cref="T:Quartz.ITrigger"/> from firing on its normal schedule if necessary. Most 
 
-             Calendars include all times by default and allow the user to specify times 
 
-             to exclude. 
 
-             </summary>
 
-             <remarks>
 
-             As such, it is often useful to think of Calendars as being used to <I>exclude</I> a block
 
-             of time - as opposed to <I>include</I> a block of time. (i.e. the 
 
-             schedule "fire every five minutes except on Sundays" could be 
 
-             implemented with a <see cref="T:Quartz.ISimpleTrigger"/> and a 
 
-             <see cref="T:Quartz.Impl.Calendar.WeeklyCalendar"/> which excludes Sundays)
 
-             <para>
 
-             Implementations MUST take care of being properly cloneable and Serializable.
 
-             </para>
 
-             </remarks>
 
-             <author>James House</author>
 
-             <author>Juergen Donnerstag</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.ICalendar.IsTimeIncluded(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine whether the given UTC time  is 'included' by the
 
-             Calendar.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ICalendar.GetNextIncludedTimeUtc(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine the next UTC time that is 'included' by the
 
-             Calendar after the given UTC time.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ICalendar.Description">
 
-             <summary> 
 
-             Gets or sets a description for the <see cref="T:Quartz.ICalendar"/> instance - may be
 
-             useful for remembering/displaying the purpose of the calendar, though
 
-             the description has no meaning to Quartz.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ICalendar.CalendarBase">
 
-             <summary>
 
-             Set a new base calendar or remove the existing one.
 
-             Get the base calendar.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.BaseCalendar.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.Calendar.BaseCalendar"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.BaseCalendar.#ctor(Quartz.ICalendar)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.Calendar.BaseCalendar"/> class.
 
-             </summary>
 
-             <param name="baseCalendar">The base calendar.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.BaseCalendar.#ctor(System.TimeZoneInfo)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.Calendar.BaseCalendar"/> class.
 
-             </summary>
 
-             <param name="timeZone">The time zone.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.BaseCalendar.#ctor(Quartz.ICalendar,System.TimeZoneInfo)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.Calendar.BaseCalendar"/> class.
 
-             </summary>
 
-             <param name="baseCalendar">The base calendar.</param>
 
-             <param name="timeZone">The time zone.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.BaseCalendar.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.BaseCalendar.ArraysEqualElementsOnEqualPlaces(System.Array,System.Array)">
 
-             <summary>
 
-             checks whether two arrays have 
 
-             the same length and 
 
-             for any given place there are equal elements 
 
-             in both arrays
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.BaseCalendar.GetBaseCalendar">
 
-             <summary>
 
-             Get the base calendar. Will be null, if not set.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.BaseCalendar.IsTimeIncluded(System.DateTimeOffset)">
 
-             <summary>
 
-             Check if date/time represented by timeStamp is included. If included
 
-             return true. The implementation of BaseCalendar simply calls the base
 
-             calendars IsTimeIncluded() method if base calendar is set.
 
-             </summary>
 
-             <seealso cref="M:Quartz.ICalendar.IsTimeIncluded(System.DateTimeOffset)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.BaseCalendar.GetNextIncludedTimeUtc(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine the next UTC time (in milliseconds) that is 'included' by the
 
-             Calendar after the given time. Return the original value if timeStamp is
 
-             included. Return 0 if all days are excluded.
 
-             </summary>
 
-             <seealso cref="M:Quartz.ICalendar.GetNextIncludedTimeUtc(System.DateTimeOffset)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.BaseCalendar.Clone">
 
-             <summary>
 
-             Creates a new object that is a copy of the current instance.
 
-             </summary>
 
-             <returns>A new object that is a copy of this instance.</returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Calendar.BaseCalendar.TimeZone">
 
-             <summary>
 
-             Gets or sets the time zone.
 
-             </summary>
 
-             <value>The time zone.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Calendar.BaseCalendar.Description">
 
-             <summary> 
 
-             Gets or sets the description given to the <see cref="T:Quartz.ICalendar"/> instance by
 
-             its creator (if any).
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Calendar.BaseCalendar.CalendarBase">
 
-             <summary>
 
-             Set a new base calendar or remove the existing one
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.AnnualCalendar.#ctor">
 
-             <summary>
 
-             Constructor
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.AnnualCalendar.#ctor(Quartz.ICalendar)">
 
-             <summary>
 
-             Constructor
 
-             </summary>
 
-             <param name="baseCalendar">The base calendar.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.AnnualCalendar.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.AnnualCalendar.IsDayExcluded(System.DateTimeOffset)">
 
-             <summary>
 
-             Return true, if day is defined to be exluded.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.AnnualCalendar.SetDayExcluded(System.DateTimeOffset,System.Boolean)">
 
-             <summary>
 
-             Redefine a certain day to be excluded (true) or included (false).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.AnnualCalendar.IsTimeIncluded(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine whether the given UTC time (in milliseconds) is 'included' by the
 
-             Calendar.
 
-             <para>
 
-             Note that this Calendar is only has full-day precision.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.AnnualCalendar.GetNextIncludedTimeUtc(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine the next UTC time (in milliseconds) that is 'included' by the
 
-             Calendar after the given time. Return the original value if timeStampUtc is
 
-             included. Return 0 if all days are excluded.
 
-             <para>
 
-             Note that this Calendar is only has full-day precision.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Calendar.AnnualCalendar.DaysExcluded">
 
-             <summary> 
 
-             Get or the array which defines the exclude-value of each day of month.
 
-             Setting will redefine the array of days excluded. The array must of size greater or
 
-             equal 31.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Calendar.CronCalendar">
 
-             <summary>
 
-             This implementation of the Calendar excludes the set of times expressed by a
 
-             given CronExpression. 
 
-             </summary>
 
-             <remarks>
 
-             For example, you could use this calendar to exclude all but business hours (8AM - 5PM) every 
 
-             day using the expression "* * 0-7,18-23 ? * *". 
 
-             <para>
 
-             It is important to remember that the cron expression here describes a set of
 
-             times to be <i>excluded</i> from firing. Whereas the cron expression in 
 
-             CronTrigger describes a set of times that can
 
-             be <i>included</i> for firing. Thus, if a <see cref="T:Quartz.ICronTrigger"/> has a 
 
-             given cron expression and is associated with a <see cref="T:Quartz.Impl.Calendar.CronCalendar"/> with
 
-             the <i>same</i> expression, the calendar will exclude all the times the 
 
-             trigger includes, and they will cancel each other out.
 
-             </para>
 
-             </remarks>
 
-             <author>Aaron Craven</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.CronCalendar.#ctor(System.String)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.Calendar.CronCalendar"/> class.
 
-             </summary>
 
-             <param name="expression">a string representation of the desired cron expression</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.CronCalendar.#ctor(Quartz.ICalendar,System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Calendar.CronCalendar"/> with the given cron expression and 
 
-             <see cref="T:Quartz.Impl.Calendar.BaseCalendar"/>. 
 
-             </summary>
 
-             <param name="baseCalendar">
 
-             the base calendar for this calendar instance 
 
-             see BaseCalendar for more information on base
 
-             calendar functionality
 
-             </param>
 
-             <param name="expression">a string representation of the desired cron expression</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.CronCalendar.#ctor(Quartz.ICalendar,System.String,System.TimeZoneInfo)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Calendar.CronCalendar"/> with the given cron expression and 
 
-             <see cref="T:Quartz.Impl.Calendar.BaseCalendar"/>. 
 
-             </summary>
 
-             <param name="baseCalendar">
 
-             the base calendar for this calendar instance 
 
-             see BaseCalendar for more information on base
 
-             calendar functionality
 
-             </param>
 
-             <param name="expression">a string representation of the desired cron expression</param>
 
-             <param name="timeZone"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.CronCalendar.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.CronCalendar.IsTimeIncluded(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine whether the given time  is 'included' by the
 
-             Calendar.
 
-             </summary>
 
-             <param name="timeUtc">the time to test</param>
 
-             <returns>a boolean indicating whether the specified time is 'included' by the CronCalendar</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.CronCalendar.GetNextIncludedTimeUtc(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine the next time that is 'included' by the
 
-             Calendar after the given time. Return the original value if timeStamp is
 
-             included. Return 0 if all days are excluded.
 
-             </summary>
 
-             <param name="timeUtc"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.CronCalendar.Clone">
 
-             <summary>
 
-             Creates a new object that is a copy of the current instance.
 
-             </summary>
 
-             <returns>A new object that is a copy of this instance.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.CronCalendar.ToString">
 
-             <summary>
 
-             Returns a <see cref="T:System.String"/> that represents the current <see cref="T:System.Object"/>.
 
-             </summary>
 
-             <returns>
 
-             A <see cref="T:System.String"/> that represents the current <see cref="T:System.Object"/>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.CronCalendar.SetCronExpressionString(System.String)">
 
-             <summary>
 
-             Sets the cron expression for the calendar to a new value.
 
-             </summary>
 
-             <param name="expression">The expression.</param>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Calendar.CronCalendar.CronExpression">
 
-             <summary>
 
-              Returns the object representation of the cron expression that defines the
 
-             dates and times this calendar excludes.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Calendar.DailyCalendar">
 
-             <summary>
 
-             This implementation of the Calendar excludes (or includes - see below) a
 
-             specified time range each day. 
 
-             </summary>
 
-             <remarks>
 
-             For example, you could use this calendar to
 
-             exclude business hours (8AM - 5PM) every day. Each <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/>
 
-             only allows a single time range to be specified, and that time range may not
 
-             * cross daily boundaries (i.e. you cannot specify a time range from 8PM - 5AM).
 
-             If the property <see cref="F:Quartz.Impl.Calendar.DailyCalendar.invertTimeRange"/> is <see langword="false"/> (default),
 
-             the time range defines a range of times in which triggers are not allowed to
 
-             * fire. If <see cref="F:Quartz.Impl.Calendar.DailyCalendar.invertTimeRange"/> is <see langword="true"/>, the time range
 
-             is inverted: that is, all times <i>outside</i> the defined time range
 
-             are excluded.
 
-             <para>
 
-             Note when using <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/>, it behaves on the same principals
 
-             as, for example, WeeklyCalendar defines a set of days that are
 
-             excluded <i>every week</i>. Likewise, <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> defines a
 
-             set of times that are excluded <i>every day</i>.
 
-             </para>
 
-             </remarks>
 
-             <author>Mike Funk</author>
 
-             <author>Aaron Craven</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.#ctor(System.String,System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> with a time range defined by the
 
-             specified strings and no baseCalendar. 
 
-             <param name="rangeStartingTime"/> and <param name="rangeEndingTime"/>
 
-             must be in the format "HH:MM[:SS[:mmm]]" where:
 
-             <ul>
 
-                 <li>
 
-                     HH is the hour of the specified time. The hour should be
 
-                      specified using military (24-hour) time and must be in the range
 
-                      0 to 23.
 
-                 </li>
 
-                 <li>
 
-                     MM is the minute of the specified time and must be in the range
 
-                     0 to 59.
 
-                 </li>
 
-                 <li>
 
-                     SS is the second of the specified time and must be in the range
 
-                     0 to 59.
 
-                 </li>
 
-                 <li>
 
-                     mmm is the millisecond of the specified time and must be in the
 
-                     range 0 to 999.
 
-                 </li>
 
-                 <li>items enclosed in brackets ('[', ']') are optional.</li>
 
-                 <li>
 
-                     The time range starting time must be before the time range ending
 
-                     time. Note this means that a time range may not cross daily 
 
-                     boundaries (10PM - 2AM)
 
-                 </li>  
 
-             </ul>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.#ctor(Quartz.ICalendar,System.String,System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> with a time range defined by the
 
-             specified strings and the specified baseCalendar.
 
-             <param name="rangeStartingTime"/> and <param name="rangeEndingTime"/>
 
-             must be in the format "HH:MM[:SS[:mmm]]" where:
 
-             <ul>
 
-             		<li>
 
-             HH is the hour of the specified time. The hour should be
 
-             specified using military (24-hour) time and must be in the range
 
-             0 to 23.
 
-             </li>
 
-             		<li>
 
-             MM is the minute of the specified time and must be in the range
 
-             0 to 59.
 
-             </li>
 
-             		<li>
 
-             SS is the second of the specified time and must be in the range
 
-             0 to 59.
 
-             </li>
 
-             		<li>
 
-             mmm is the millisecond of the specified time and must be in the
 
-             range 0 to 999.
 
-             </li>
 
-             		<li>
 
-             items enclosed in brackets ('[', ']') are optional.
 
-             </li>
 
-             		<li>
 
-             The time range starting time must be before the time range ending
 
-             time. Note this means that a time range may not cross daily
 
-             boundaries (10PM - 2AM)
 
-             </li>
 
-             	</ul>
 
-             </summary>
 
-             <param name="baseCalendar">The base calendar for this calendar instance see BaseCalendar for more
 
-             information on base calendar functionality.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> with a time range defined by the
 
-             specified values and no baseCalendar. Values are subject to
 
-             the following validations:
 
-             <ul>
 
-                 <li>
 
-                     Hours must be in the range 0-23 and are expressed using military
 
-             	    (24-hour) time.
 
-                 </li>
 
-             	<li>Minutes must be in the range 0-59</li>
 
-             	<li>Seconds must be in the range 0-59</li>
 
-             	<li>Milliseconds must be in the range 0-999</li>
 
-             	<li>
 
-                     The time range starting time must be before the time range ending
 
-             	    time. Note this means that a time range may not cross daily 
 
-             	    boundaries (10PM - 2AM)
 
-                 </li>  
 
-             </ul>
 
-             </summary>
 
-             <param name="rangeStartingHourOfDay">The range starting hour of day.</param>
 
-             <param name="rangeStartingMinute">The range starting minute.</param>
 
-             <param name="rangeStartingSecond">The range starting second.</param>
 
-             <param name="rangeStartingMillis">The range starting millis.</param>
 
-             <param name="rangeEndingHourOfDay">The range ending hour of day.</param>
 
-             <param name="rangeEndingMinute">The range ending minute.</param>
 
-             <param name="rangeEndingSecond">The range ending second.</param>
 
-             <param name="rangeEndingMillis">The range ending millis.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.#ctor(Quartz.ICalendar,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> with a time range defined by the
 
-             specified values and the specified <param name="baseCalendar"/>. Values are
 
-             subject to the following validations:
 
-             <ul>
 
-             		<li>
 
-             Hours must be in the range 0-23 and are expressed using military
 
-             (24-hour) time.
 
-             </li>
 
-             		<li>Minutes must be in the range 0-59</li>
 
-             		<li>Seconds must be in the range 0-59</li>
 
-             		<li>Milliseconds must be in the range 0-999</li>
 
-             		<li>
 
-             The time range starting time must be before the time range ending
 
-             time. Note this means that a time range may not cross daily
 
-             boundaries (10PM - 2AM)
 
-             </li>
 
-             	</ul>
 
-             </summary>
 
-             <param name="rangeStartingHourOfDay">The range starting hour of day.</param>
 
-             <param name="rangeStartingMinute">The range starting minute.</param>
 
-             <param name="rangeStartingSecond">The range starting second.</param>
 
-             <param name="rangeStartingMillis">The range starting millis.</param>
 
-             <param name="rangeEndingHourOfDay">The range ending hour of day.</param>
 
-             <param name="rangeEndingMinute">The range ending minute.</param>
 
-             <param name="rangeEndingSecond">The range ending second.</param>
 
-             <param name="rangeEndingMillis">The range ending millis.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.#ctor(System.DateTime,System.DateTime)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> with a time range defined by the
 
-             specified <see cref="T:System.DateTime"/>s and no 
 
-             baseCalendar. The Calendars are subject to the following
 
-             considerations:
 
-             <ul>
 
-                 <li>
 
-                     Only the time-of-day fields of the specified Calendars will be
 
-             	    used (the date fields will be ignored)
 
-                 </li>
 
-             	<li>
 
-                     The starting time must be before the ending time of the defined
 
-             	    time range. Note this means that a time range may not cross
 
-             	    daily boundaries (10PM - 2AM). <i>(because only time fields are
 
-             	    are used, it is possible for two Calendars to represent a valid
 
-             	    time range and 
 
-             	    <c>rangeStartingCalendar.after(rangeEndingCalendar) ==  true</c>)
 
-             		</i>
 
-                 </li>  
 
-             </ul> 
 
-             </summary>
 
-             <param name="rangeStartingCalendarUtc">The range starting calendar.</param>
 
-             <param name="rangeEndingCalendarUtc">The range ending calendar.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.#ctor(Quartz.ICalendar,System.DateTime,System.DateTime)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> with a time range defined by the
 
-             specified <see cref="T:System.DateTime"/>s and the specified
 
-             <param name="baseCalendar"/>. The Calendars are subject to the following
 
-             considerations:
 
-             <ul>
 
-             		<li>
 
-             Only the time-of-day fields of the specified Calendars will be
 
-             used (the date fields will be ignored)
 
-             </li>
 
-             		<li>
 
-             The starting time must be before the ending time of the defined
 
-             time range. Note this means that a time range may not cross
 
-             daily boundaries (10PM - 2AM). <i>(because only time fields are
 
-             are used, it is possible for two Calendars to represent a valid
 
-             time range and
 
-             <c>rangeStartingCalendarUtc > rangeEndingCalendarUtc == true</c>)</i>
 
-             		</li>
 
-             	</ul>
 
-             </summary>
 
-             <param name="rangeStartingCalendarUtc">The range starting calendar.</param>
 
-             <param name="rangeEndingCalendarUtc">The range ending calendar.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.#ctor(System.Int64,System.Int64)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> with a time range defined by the
 
-             specified values and no baseCalendar. The values are 
 
-             subject to the following considerations:
 
-             <ul>
 
-                 <li>
 
-                     Only the time-of-day portion of the specified values will be
 
-             	    used
 
-                 </li>
 
-             	<li>
 
-                     The starting time must be before the ending time of the defined
 
-             	    time range. Note this means that a time range may not cross
 
-             	    daily boundaries (10PM - 2AM). <i>(because only time value are
 
-             	    are used, it is possible for the two values to represent a valid
 
-             	    time range and <c>rangeStartingTime > rangeEndingTime</c>)</i>
 
-                 </li>  
 
-             </ul> 
 
-             </summary>
 
-             <param name="rangeStartingTimeInMillis">The range starting time in millis.</param>
 
-             <param name="rangeEndingTimeInMillis">The range ending time in millis.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.#ctor(Quartz.ICalendar,System.Int64,System.Int64)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> with a time range defined by the
 
-             specified values and the specified <param name="baseCalendar"/>. The values
 
-             are subject to the following considerations:
 
-             <ul>
 
-             		<li>
 
-             Only the time-of-day portion of the specified values will be
 
-             used
 
-             </li>
 
-             		<li>
 
-             The starting time must be before the ending time of the defined
 
-             time range. Note this means that a time range may not cross
 
-             daily boundaries (10PM - 2AM). <i>(because only time value are
 
-             are used, it is possible for the two values to represent a valid
 
-             time range and <c>rangeStartingTime > rangeEndingTime</c>)</i>
 
-             		</li>
 
-             	</ul>
 
-             </summary>
 
-             <param name="rangeStartingTimeInMillis">The range starting time in millis.</param>
 
-             <param name="rangeEndingTimeInMillis">The range ending time in millis.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.IsTimeIncluded(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine whether the given time  is 'included' by the
 
-             Calendar.
 
-             </summary>
 
-             <param name="timeUtc"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.GetNextIncludedTimeUtc(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine the next time (in milliseconds) that is 'included' by the
 
-             Calendar after the given time. Return the original value if timeStamp is
 
-             included. Return 0 if all days are excluded.
 
-             </summary>
 
-             <param name="timeUtc"></param>
 
-             <returns></returns>
 
-             <seealso cref="M:Quartz.ICalendar.GetNextIncludedTimeUtc(System.DateTimeOffset)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.GetTimeRangeStartingTimeUtc(System.DateTimeOffset)">
 
-             <summary>
 
-             Returns the start time of the time range of the day 
 
-             specified in <param name="timeUtc" />.
 
-             </summary>
 
-             <returns>
 
-                 a DateTime representing the start time of the
 
-                 time range for the specified date.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.GetTimeRangeEndingTimeUtc(System.DateTimeOffset)">
 
-             <summary>
 
-             Returns the end time of the time range of the day
 
-             specified in <param name="timeUtc" />
 
-             </summary>
 
-             <returns>
 
-             A DateTime representing the end time of the
 
-             time range for the specified date.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.ToString">
 
-             <summary>
 
-             Returns a <see cref="T:System.String"></see> that represents the current <see cref="T:System.Object"></see>.
 
-             </summary>
 
-             <returns>
 
-             A <see cref="T:System.String"></see> that represents the current <see cref="T:System.Object"></see>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.SetTimeRange(System.String,System.String)">
 
-             <summary>
 
-             Sets the time range for the <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> to the times 
 
-             represented in the specified Strings. 
 
-             </summary>
 
-             <param name="rangeStartingTimeString">The range starting time string.</param>
 
-             <param name="rangeEndingTimeString">The range ending time string.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.SetTimeRange(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Sets the time range for the <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> to the times
 
-             represented in the specified values. 
 
-             </summary>
 
-             <param name="rangeStartingHourOfDay">The range starting hour of day.</param>
 
-             <param name="rangeStartingMinute">The range starting minute.</param>
 
-             <param name="rangeStartingSecond">The range starting second.</param>
 
-             <param name="rangeStartingMillis">The range starting millis.</param>
 
-             <param name="rangeEndingHourOfDay">The range ending hour of day.</param>
 
-             <param name="rangeEndingMinute">The range ending minute.</param>
 
-             <param name="rangeEndingSecond">The range ending second.</param>
 
-             <param name="rangeEndingMillis">The range ending millis.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.SetTimeRange(System.DateTime,System.DateTime)">
 
-             <summary>
 
-             Sets the time range for the <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> to the times
 
-             represented in the specified <see cref="T:System.DateTime"/>s. 
 
-             </summary>
 
-             <param name="rangeStartingCalendarUtc">The range starting calendar.</param>
 
-             <param name="rangeEndingCalendarUtc">The range ending calendar.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.SetTimeRange(System.Int64,System.Int64)">
 
-             <summary>
 
-             Sets the time range for the <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> to the times
 
-             represented in the specified values. 
 
-             </summary>
 
-             <param name="rangeStartingTime">The range starting time.</param>
 
-             <param name="rangeEndingTime">The range ending time.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.GetStartOfDay(System.DateTimeOffset)">
 
-             <summary>
 
-             Gets the start of day, practically zeroes time part.
 
-             </summary>
 
-             <param name="time">The time.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.GetEndOfDay(System.DateTimeOffset)">
 
-             <summary>
 
-             Gets the end of day, pratically sets time parts to maximum allowed values.
 
-             </summary>
 
-             <param name="time">The time.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.Validate(System.Int32,System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Checks the specified values for validity as a set of time values.
 
-             </summary>
 
-             <param name="hourOfDay">The hour of day.</param>
 
-             <param name="minute">The minute.</param>
 
-             <param name="second">The second.</param>
 
-             <param name="millis">The millis.</param>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Calendar.DailyCalendar.InvertTimeRange">
 
-             <summary>
 
-             Indicates whether the time range represents an inverted time range (see
 
-             class description).
 
-             </summary>
 
-             <value><c>true</c> if invert time range; otherwise, <c>false</c>.</value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Calendar.HolidayCalendar">
 
-             <summary>
 
-             This implementation of the Calendar stores a list of holidays (full days
 
-             that are excluded from scheduling).
 
-             </summary>
 
-             <remarks>
 
-             The implementation DOES take the year into consideration, so if you want to
 
-             exclude July 4th for the next 10 years, you need to add 10 entries to the
 
-             exclude list.
 
-             </remarks>
 
-             <author>Sharada Jambula</author>
 
-             <author>Juergen Donnerstag</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.HolidayCalendar.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.Calendar.HolidayCalendar"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.HolidayCalendar.#ctor(Quartz.ICalendar)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.Calendar.HolidayCalendar"/> class.
 
-             </summary>
 
-             <param name="baseCalendar">The base calendar.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.HolidayCalendar.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.HolidayCalendar.IsTimeIncluded(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine whether the given time (in milliseconds) is 'included' by the
 
-             Calendar.
 
-             <para>
 
-             Note that this Calendar is only has full-day precision.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.HolidayCalendar.GetNextIncludedTimeUtc(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine the next time (in milliseconds) that is 'included' by the
 
-             Calendar after the given time.
 
-             <para>
 
-             Note that this Calendar is only has full-day precision.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.HolidayCalendar.Clone">
 
-             <summary>
 
-             Creates a new object that is a copy of the current instance.
 
-             </summary>
 
-             <returns>A new object that is a copy of this instance.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.HolidayCalendar.AddExcludedDate(System.DateTime)">
 
-             <summary>
 
-             Add the given Date to the list of excluded days. Only the month, day and
 
-             year of the returned dates are significant.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.HolidayCalendar.RemoveExcludedDate(System.DateTime)">
 
-             <summary>
 
-             Removes the excluded date.
 
-             </summary>
 
-             <param name="dateToRemoveUtc">The date to remove.</param>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Calendar.HolidayCalendar.ExcludedDates">
 
-             <summary>
 
-             Returns a <see cref="T:Quartz.Collection.ISortedSet`1"/> of Dates representing the excluded
 
-             days. Only the month, day and year of the returned dates are
 
-             significant.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Calendar.MonthlyCalendar">
 
-             <summary>
 
-             This implementation of the Calendar excludes a set of days of the month. You
 
-             may use it to exclude every 1. of each month for example. But you may define
 
-             any day of a month.
 
-             </summary>
 
-             <seealso cref="T:Quartz.ICalendar"/>
 
-             <seealso cref="T:Quartz.Impl.Calendar.BaseCalendar"/>
 
-             <author>Juergen Donnerstag</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.MonthlyCalendar.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.Calendar.MonthlyCalendar"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.MonthlyCalendar.#ctor(Quartz.ICalendar)">
 
-             <summary>
 
-             Constructor
 
-             </summary>
 
-             <param name="baseCalendar">The base calendar.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.MonthlyCalendar.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.MonthlyCalendar.Init">
 
-             <summary> 
 
-             Initialize internal variables
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.MonthlyCalendar.IsDayExcluded(System.Int32)">
 
-             <summary>
 
-             Return true, if mday is defined to be exluded.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.MonthlyCalendar.SetDayExcluded(System.Int32,System.Boolean)">
 
-             <summary>
 
-             Redefine a certain day of the month to be excluded (true) or included
 
-             (false).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.MonthlyCalendar.AreAllDaysExcluded">
 
-             <summary>
 
-             Check if all days are excluded. That is no day is included.
 
-             </summary>
 
-             <returns> boolean
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.MonthlyCalendar.IsTimeIncluded(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine whether the given time (in milliseconds) is 'included' by the
 
-             Calendar.
 
-             <para>
 
-             Note that this Calendar is only has full-day precision.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.MonthlyCalendar.GetNextIncludedTimeUtc(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine the next time (in milliseconds) that is 'included' by the
 
-             Calendar after the given time. Return the original value if timeStamp is
 
-             included. Return DateTime.MinValue if all days are excluded.
 
-             <para>
 
-             Note that this Calendar is only has full-day precision.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.MonthlyCalendar.Clone">
 
-             <summary>
 
-             Creates a new object that is a copy of the current instance.
 
-             </summary>
 
-             <returns>A new object that is a copy of this instance.</returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Calendar.MonthlyCalendar.DaysExcluded">
 
-             <summary>
 
-             Get or set the array which defines the exclude-value of each day of month
 
-             Setting will redefine the array of days excluded. The array must of size greater or
 
-             equal 31.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Calendar.WeeklyCalendar">
 
-             <summary>
 
-             This implementation of the Calendar excludes a set of days of the week. You
 
-             may use it to exclude weekends for example. But you may define any day of
 
-             the week.
 
-             </summary>
 
-             <seealso cref="T:Quartz.ICalendar"/>
 
-             <seealso cref="T:Quartz.Impl.Calendar.BaseCalendar"/>
 
-             <author>Juergen Donnerstag</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.WeeklyCalendar.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.Calendar.WeeklyCalendar"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.WeeklyCalendar.#ctor(Quartz.ICalendar)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.Calendar.WeeklyCalendar"/> class.
 
-             </summary>
 
-             <param name="baseCalendar">The base calendar.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.WeeklyCalendar.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.WeeklyCalendar.Init">
 
-             <summary>
 
-             Initialize internal variables
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.WeeklyCalendar.IsDayExcluded(System.DayOfWeek)">
 
-             <summary> 
 
-             Return true, if wday is defined to be exluded. E. g.
 
-             saturday and sunday.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.WeeklyCalendar.SetDayExcluded(System.DayOfWeek,System.Boolean)">
 
-             <summary>
 
-             Redefine a certain day of the week to be excluded (true) or included
 
-             (false). Use <see cref="T:System.DayOfWeek"/> enum to determine the weekday.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.WeeklyCalendar.AreAllDaysExcluded">
 
-             <summary>
 
-             Check if all week ays are excluded. That is no day is included.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.WeeklyCalendar.IsTimeIncluded(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine whether the given time (in milliseconds) is 'included' by the
 
-             Calendar.
 
-             <para>
 
-             Note that this Calendar is only has full-day precision.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.WeeklyCalendar.GetNextIncludedTimeUtc(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine the next time (in milliseconds) that is 'included' by the
 
-             Calendar after the given time. Return the original value if timeStamp is
 
-             included. Return DateTime.MinValue if all days are excluded.
 
-             <para>
 
-             Note that this Calendar is only has full-day precision.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Calendar.WeeklyCalendar.DaysExcluded">
 
-             <summary> 
 
-             Get the array with the week days.
 
-             Setting will redefine the array of days excluded. The array must of size greater or
 
-             equal 8. java.util.Calendar's constants like MONDAY should be used as
 
-             index. A value of true is regarded as: exclude it.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Matchers.AndMatcher`1">
 
-             <summary>
 
-             Matches using an AND operator on two Matcher operands. 
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.IMatcher`1">
 
-             <summary>
 
-             Matchers can be used in various <see cref="T:Quartz.IScheduler"/> API methods to 
 
-             select the entities that should be operated upon.
 
-             </summary>
 
-             <author>James House</author>
 
-             <typeparam name="T"></typeparam>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.AndMatcher`1.And``1(Quartz.IMatcher{``0},Quartz.IMatcher{``0})">
 
-             <summary>
 
-             Create an AndMatcher that depends upon the result of both of the given matchers.
 
-             </summary>
 
-             <typeparam name="T"></typeparam>
 
-             <param name="leftOperand"></param>
 
-             <param name="rightOperand"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Matchers.EverythingMatcher`1">
 
-             <summary>
 
-             Matches on the complete key being equal (both name and group).
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <author>jhouse</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.EverythingMatcher`1.AllJobs">
 
-             <summary>
 
-             Create an EverythingMatcher that matches all jobs.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.EverythingMatcher`1.AllTriggers">
 
-             <summary>
 
-             Create an EverythingMatcher that matches all triggers.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Matchers.GroupMatcher`1">
 
-             <summary>
 
-             Matches on group (ignores name) property of Keys.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Matchers.StringMatcher`1">
 
-             <summary>
 
-             An abstract base class for some types of matchers.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.GroupMatcher`1.GroupEquals(System.String)">
 
-             <summary>
 
-             Create a GroupMatcher that matches groups equaling the given string.
 
-             </summary>
 
-             <param name="compareTo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.GroupMatcher`1.GroupStartsWith(System.String)">
 
-             <summary>
 
-             Create a GroupMatcher that matches groups starting with the given string.
 
-             </summary>
 
-             <param name="compareTo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.GroupMatcher`1.GroupEndsWith(System.String)">
 
-             <summary>
 
-             Create a GroupMatcher that matches groups ending with the given string.
 
-             </summary>
 
-             <param name="compareTo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.GroupMatcher`1.GroupContains(System.String)">
 
-             <summary>
 
-             Create a GroupMatcher that matches groups containing the given string.
 
-             </summary>
 
-             <param name="compareTo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.GroupMatcher`1.AnyGroup">
 
-             <summary>
 
-             Create a GroupMatcher that matches all.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Matchers.KeyMatcher`1">
 
-             <summary>
 
-             Matches on the complete key being equal (both name and group). 
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.KeyMatcher`1.KeyEquals``1(``0)">
 
-             <summary>
 
-             Create a KeyMatcher that matches Keys that equal the given key. 
 
-             </summary>
 
-             <typeparam name="T"></typeparam>
 
-             <param name="compareTo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Matchers.NameMatcher`1">
 
-             <summary>
 
-             Matches on name (ignores group) property of Keys.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.NameMatcher`1.NameEquals(System.String)">
 
-             <summary>
 
-             Create a NameMatcher that matches names equaling the given string.
 
-             </summary>
 
-             <param name="compareTo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.NameMatcher`1.NameStartsWith(System.String)">
 
-             <summary>
 
-             Create a NameMatcher that matches names starting with the given string.
 
-             </summary>
 
-             <param name="compareTo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.NameMatcher`1.NameEndsWith(System.String)">
 
-             <summary>
 
-             Create a NameMatcher that matches names ending with the given string.
 
-             </summary>
 
-             <param name="compareTo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.NameMatcher`1.NameContains(System.String)">
 
-             <summary>
 
-             Create a NameMatcher that matches names containing the given string.
 
-             </summary>
 
-             <param name="compareTo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Matchers.NotMatcher`1">
 
-             <summary>
 
-             Matches using an NOT operator on another Matcher. 
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.NotMatcher`1.Not``1(Quartz.IMatcher{``0})">
 
-             <summary>
 
-             Create a NotMatcher that reverses the result of the given matcher.
 
-             </summary>
 
-             <typeparam name="T"></typeparam>
 
-             <param name="operand"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Matchers.OrMatcher`1">
 
-             <summary>
 
-             Matches using an OR operator on two Matcher operands. 
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.OrMatcher`1.Or``1(Quartz.IMatcher{``0},Quartz.IMatcher{``0})">
 
-             <summary>
 
-             Create an OrMatcher that depends upon the result of at least one of the given matchers.
 
-             </summary>
 
-             <typeparam name="T"></typeparam>
 
-             <param name="leftOperand"></param>
 
-             <param name="rightOperand"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Matchers.StringOperator">
 
-             <summary>
 
-             Operators available for comparing string values.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Triggers.AbstractTrigger">
 
-             <summary>
 
-             The base abstract class to be extended by all triggers.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             <see cref="T:Quartz.ITrigger"/>s have a name and group associated with them, which
 
-             should uniquely identify them within a single <see cref="T:Quartz.IScheduler"/>.
 
-             </para>
 
-             
 
-             <para>
 
-             <see cref="T:Quartz.ITrigger"/>s are the 'mechanism' by which <see cref="T:Quartz.IJob"/> s
 
-             are scheduled. Many <see cref="T:Quartz.ITrigger"/> s can point to the same <see cref="T:Quartz.IJob"/>,
 
-             but a single <see cref="T:Quartz.ITrigger"/> can only point to one <see cref="T:Quartz.IJob"/>.
 
-             </para>
 
-             
 
-             <para>
 
-             Triggers can 'send' parameters/data to <see cref="T:Quartz.IJob"/>s by placing contents
 
-             into the <see cref="P:Quartz.Impl.Triggers.AbstractTrigger.JobDataMap"/> on the <see cref="T:Quartz.ITrigger"/>.
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.ISimpleTrigger"/>
 
-             <seealso cref="T:Quartz.ICronTrigger"/>
 
-             <seealso cref="T:Quartz.IDailyTimeIntervalTrigger"/>
 
-             <seealso cref="P:Quartz.Impl.Triggers.AbstractTrigger.JobDataMap"/>
 
-             <seealso cref="T:Quartz.IJobExecutionContext"/>
 
-             <author>James House</author>
 
-             <author>Sharada Jambula</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Spi.IOperableTrigger">
 
-             <summary>
 
-             Internal interface for managing triggers. This interface should not be used by the Quartz client.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Spi.IMutableTrigger">
 
-             <summary>
 
-             Should not be used by end users.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.ITrigger">
 
-             <summary>
 
-             The base interface with properties common to all <see cref="T:Quartz.ITrigger"/>s - 
 
-             use <see cref="T:Quartz.TriggerBuilder"/> to instantiate an actual Trigger.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             <see cref="T:Quartz.ITrigger"/>s have a <see cref="T:Quartz.TriggerKey"/> associated with them, which
 
-             should uniquely identify them within a single <see cref="T:Quartz.IScheduler"/>.
 
-             </para>
 
-             
 
-             <para>
 
-             <see cref="T:Quartz.ITrigger"/>s are the 'mechanism' by which <see cref="T:Quartz.IJob"/> s
 
-             are scheduled. Many <see cref="T:Quartz.ITrigger"/> s can point to the same <see cref="T:Quartz.IJob"/>,
 
-             but a single <see cref="T:Quartz.ITrigger"/> can only point to one <see cref="T:Quartz.IJob"/>.
 
-             </para>
 
-             
 
-             <para>
 
-             Triggers can 'send' parameters/data to <see cref="T:Quartz.IJob"/>s by placing contents
 
-             into the <see cref="P:Quartz.ITrigger.JobDataMap"/> on the <see cref="T:Quartz.ITrigger"/>.
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.TriggerBuilder"/>
 
-             <seealso cref="T:Quartz.ICalendarIntervalTrigger"/>
 
-             <seealso cref="T:Quartz.ISimpleTrigger"/>
 
-             <seealso cref="T:Quartz.ICronTrigger"/>
 
-             <seealso cref="T:Quartz.IDailyTimeIntervalTrigger"/>
 
-             <seealso cref="P:Quartz.ITrigger.JobDataMap"/>
 
-             <seealso cref="T:Quartz.IJobExecutionContext"/>
 
-             <author>James House</author>
 
-             <author>Sharada Jambula</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.ITrigger.GetTriggerBuilder">
 
-             <summary>
 
-             Get a <see cref="T:Quartz.TriggerBuilder"/> that is configured to produce a 
 
-             trigger identical to this one.
 
-             </summary>
 
-             <seealso cref="M:Quartz.ITrigger.GetScheduleBuilder"/>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.ITrigger.GetScheduleBuilder">
 
-             <summary>
 
-             Get a <see cref="T:Quartz.IScheduleBuilder"/> that is configured to produce a 
 
-             schedule identical to this trigger's schedule.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.ITrigger.GetMayFireAgain">
 
-             <summary> 
 
-             Used by the <see cref="T:Quartz.IScheduler"/> to determine whether or not
 
-             it is possible for this <see cref="T:Quartz.ITrigger"/> to fire again.
 
-             <para>
 
-             If the returned value is <see langword="false"/> then the <see cref="T:Quartz.IScheduler"/>
 
-             may remove the <see cref="T:Quartz.ITrigger"/> from the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ITrigger.GetNextFireTimeUtc">
 
-              <summary>
 
-              Returns the next time at which the <see cref="T:Quartz.ITrigger"/> is scheduled to fire. If
 
-              the trigger will not fire again, <see langword="null"/> will be returned.  Note that
 
-              the time returned can possibly be in the past, if the time that was computed
 
-              for the trigger to next fire has already arrived, but the scheduler has not yet
 
-              been able to fire the trigger (which would likely be due to lack of resources
 
-              e.g. threads).
 
-              </summary>
 
-             <remarks>
 
-              The value returned is not guaranteed to be valid until after the <see cref="T:Quartz.ITrigger"/>
 
-              has been added to the scheduler.
 
-              </remarks>
 
-              <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.ITrigger.GetPreviousFireTimeUtc">
 
-             <summary>
 
-             Returns the previous time at which the <see cref="T:Quartz.ITrigger"/> fired.
 
-             If the trigger has not yet fired, <see langword="null"/> will be returned.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ITrigger.GetFireTimeAfter(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Returns the next time at which the <see cref="T:Quartz.ITrigger"/> will fire,
 
-             after the given time. If the trigger will not fire after the given time,
 
-             <see langword="null"/> will be returned.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ITrigger.Description">
 
-             <summary>
 
-             Get or set the description given to the <see cref="T:Quartz.ITrigger"/> instance by
 
-             its creator (if any).
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ITrigger.CalendarName">
 
-             <summary>
 
-             Get or set  the <see cref="T:Quartz.ICalendar"/> with the given name with
 
-             this Trigger. Use <see langword="null"/> when setting to dis-associate a Calendar.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ITrigger.JobDataMap">
 
-             <summary>
 
-             Get or set the <see cref="P:Quartz.ITrigger.JobDataMap"/> that is associated with the 
 
-             <see cref="T:Quartz.ITrigger"/>.
 
-             <para>
 
-             Changes made to this map during job execution are not re-persisted, and
 
-             in fact typically result in an illegal state.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ITrigger.FinalFireTimeUtc">
 
-             <summary>
 
-             Returns the last UTC time at which the <see cref="T:Quartz.ITrigger"/> will fire, if
 
-             the Trigger will repeat indefinitely, null will be returned.
 
-             <para>
 
-             Note that the return time *may* be in the past.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ITrigger.MisfireInstruction">
 
-             <summary>
 
-             Get or set the instruction the <see cref="T:Quartz.IScheduler"/> should be given for
 
-             handling misfire situations for this <see cref="T:Quartz.ITrigger"/>- the
 
-             concrete <see cref="T:Quartz.ITrigger"/> type that you are using will have
 
-             defined a set of additional MISFIRE_INSTRUCTION_XXX
 
-             constants that may be set to this property.
 
-             <para>
 
-             If not explicitly set, the default value is <see cref="F:Quartz.MisfireInstruction.InstructionNotSet"/>.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="F:Quartz.MisfireInstruction.InstructionNotSet"/>
 
-             <seealso cref="T:Quartz.ISimpleTrigger"/>
 
-             <seealso cref="T:Quartz.ICronTrigger"/>
 
-         </member>
 
-         <member name="P:Quartz.ITrigger.EndTimeUtc">
 
-             <summary>
 
-             Gets and sets the date/time on which the trigger must stop firing. This 
 
-             defines the final boundary for trigger firings 舒 the trigger will
 
-             not fire after to this date and time. If this value is null, no end time
 
-             boundary is assumed, and the trigger can continue indefinitely.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ITrigger.StartTimeUtc">
 
-             <summary>
 
-             The time at which the trigger's scheduling should start.  May or may not
 
-             be the first actual fire time of the trigger, depending upon the type of
 
-             trigger and the settings of the other properties of the trigger.  However
 
-             the first actual first time will not be before this date.
 
-             </summary>
 
-             <remarks>
 
-             Setting a value in the past may cause a new trigger to compute a first
 
-             fire time that is in the past, which may cause an immediate misfire
 
-             of the trigger.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.ITrigger.Priority">
 
-             <summary>
 
-             The priority of a <see cref="T:Quartz.ITrigger"/> acts as a tie breaker such that if 
 
-             two <see cref="T:Quartz.ITrigger"/>s have the same scheduled fire time, then Quartz
 
-             will do its best to give the one with the higher priority first access 
 
-             to a worker thread.
 
-             </summary>
 
-             <remarks>
 
-             If not explicitly set, the default value is <i>5</i>.
 
-             </remarks>
 
-             <returns></returns>
 
-             <see cref="F:Quartz.TriggerConstants.DefaultPriority"/>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IMutableTrigger.Description">
 
-             <summary>
 
-             Set a description for the <see cref="T:Quartz.ITrigger"/> instance - may be
 
-             useful for remembering/displaying the purpose of the trigger, though the
 
-             description has no meaning to Quartz.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IMutableTrigger.CalendarName">
 
-             <summary>
 
-             Associate the <see cref="T:Quartz.ICalendar"/> with the given name with this Trigger.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IMutableTrigger.JobDataMap">
 
-             <summary>
 
-             Set the <see cref="P:Quartz.Spi.IMutableTrigger.JobDataMap"/> to be associated with the
 
-             <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IMutableTrigger.Priority">
 
-             <summary>
 
-             The priority of a <see cref="T:Quartz.ITrigger"/> acts as a tie breaker such that if
 
-             two <see cref="T:Quartz.ITrigger"/>s have the same scheduled fire time, then Quartz
 
-             will do its best to give the one with the higher priority first access
 
-             to a worker thread.
 
-             </summary>
 
-             <remarks>
 
-             If not explicitly set, the default value is 5.
 
-             </remarks>
 
-             <seealso cref="F:Quartz.TriggerConstants.DefaultPriority"/>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IMutableTrigger.StartTimeUtc">
 
-             <summary>
 
-             <para>
 
-             The time at which the trigger's scheduling should start.  May or may not
 
-             be the first actual fire time of the trigger, depending upon the type of
 
-             trigger and the settings of the other properties of the trigger.  However
 
-             the first actual first time will not be before this date.
 
-             </para>
 
-             <para>
 
-             Setting a value in the past may cause a new trigger to compute a first
 
-             fire time that is in the past, which may cause an immediate misfire
 
-             of the trigger.
 
-             </para>
 
-             ew DateTimeOffset StartTimeUtc {  get; set; }
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IMutableTrigger.EndTimeUtc">
 
-             <summary>
 
-             <para>
 
-             Set the time at which the <see cref="T:Quartz.ITrigger"/> should quit repeating -
 
-             regardless of any remaining repeats (based on the trigger's particular
 
-             repeat settings).
 
-             </para>
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IMutableTrigger.MisfireInstruction">
 
-             <summary>
 
-             Set the instruction the <see cref="T:Quartz.IScheduler"/> should be given for
 
-             handling misfire situations for this <see cref="T:Quartz.ITrigger"/>- the
 
-             concrete <see cref="T:Quartz.ITrigger"/> type that you are using will have
 
-             defined a set of additional MisfireInstruction.XXX
 
-             constants that may be passed to this method.
 
-             </summary>
 
-             <remarks>
 
-             If not explicitly set, the default value is <see cref="F:Quartz.MisfireInstruction.SmartPolicy"/>.
 
-             </remarks>
 
-             <seealso cref="F:Quartz.MisfireInstruction.SmartPolicy"/>
 
-             <seealso cref="T:Quartz.ISimpleTrigger"/>
 
-             <seealso cref="T:Quartz.ICronTrigger"/>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IOperableTrigger.Triggered(Quartz.ICalendar)">
 
-             <summary>
 
-             This method should not be used by the Quartz client.
 
-             </summary>
 
-             <remarks>
 
-             Called when the <see cref="T:Quartz.IScheduler"/> has decided to 'fire'
 
-             the trigger (Execute the associated <see cref="T:Quartz.IJob"/>), in order to
 
-             give the <see cref="T:Quartz.ITrigger"/> a chance to update itself for its next
 
-             triggering (if any).
 
-             </remarks>
 
-             <seealso cref="T:Quartz.JobExecutionException"/>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IOperableTrigger.ComputeFirstFireTimeUtc(Quartz.ICalendar)">
 
-             <summary>
 
-             This method should not be used by the Quartz client.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             Called by the scheduler at the time a <see cref="T:Quartz.ITrigger"/> is first
 
-             added to the scheduler, in order to have the <see cref="T:Quartz.ITrigger"/>
 
-             compute its first fire time, based on any associated calendar.
 
-             </para>
 
-             
 
-             <para>
 
-             After this method has been called, <see cref="M:Quartz.ITrigger.GetNextFireTimeUtc"/>
 
-             should return a valid answer.
 
-             </para>
 
-             </remarks>
 
-             <returns> 
 
-             The first time at which the <see cref="T:Quartz.ITrigger"/> will be fired
 
-             by the scheduler, which is also the same value <see cref="M:Quartz.ITrigger.GetNextFireTimeUtc"/>
 
-             will return (until after the first firing of the <see cref="T:Quartz.ITrigger"/>).
 
-             </returns>     
 
-         </member>
 
-         <member name="M:Quartz.Spi.IOperableTrigger.ExecutionComplete(Quartz.IJobExecutionContext,Quartz.JobExecutionException)">
 
-             <summary>
 
-             This method should not be used by the Quartz client.
 
-             </summary>
 
-             <remarks>
 
-             Called after the <see cref="T:Quartz.IScheduler"/> has executed the
 
-             <see cref="T:Quartz.IJobDetail"/> associated with the <see cref="T:Quartz.ITrigger"/>
 
-             in order to get the final instruction code from the trigger.
 
-             </remarks>
 
-             <param name="context">
 
-             is the <see cref="T:Quartz.IJobExecutionContext"/> that was used by the
 
-             <see cref="T:Quartz.IJob"/>'s<see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> method.</param>
 
-             <param name="result">is the <see cref="T:Quartz.JobExecutionException"/> thrown by the
 
-             <see cref="T:Quartz.IJob"/>, if any (may be null).
 
-             </param>
 
-             <returns>
 
-             One of the <see cref="T:Quartz.SchedulerInstruction"/> members.
 
-             </returns>
 
-             <seealso cref="F:Quartz.SchedulerInstruction.NoInstruction"/>
 
-             <seealso cref="F:Quartz.SchedulerInstruction.ReExecuteJob"/>
 
-             <seealso cref="F:Quartz.SchedulerInstruction.DeleteTrigger"/>
 
-             <seealso cref="F:Quartz.SchedulerInstruction.SetTriggerComplete"/>
 
-             <seealso cref="M:Quartz.Spi.IOperableTrigger.Triggered(Quartz.ICalendar)"/>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IOperableTrigger.UpdateAfterMisfire(Quartz.ICalendar)">
 
-             <summary> 
 
-             This method should not be used by the Quartz client.
 
-             <para>
 
-             To be implemented by the concrete classes that extend this class.
 
-             </para>
 
-             <para>
 
-             The implementation should update the <see cref="T:Quartz.ITrigger"/>'s state
 
-             based on the MISFIRE_INSTRUCTION_XXX that was selected when the <see cref="T:Quartz.ITrigger"/>
 
-             was created.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IOperableTrigger.UpdateWithNewCalendar(Quartz.ICalendar,System.TimeSpan)">
 
-             <summary> 
 
-             This method should not be used by the Quartz client.
 
-             <para>
 
-             The implementation should update the <see cref="T:Quartz.ITrigger"/>'s state
 
-             based on the given new version of the associated <see cref="T:Quartz.ICalendar"/>
 
-             (the state should be updated so that it's next fire time is appropriate
 
-             given the Calendar's new settings). 
 
-             </para>
 
-             </summary>
 
-             <param name="cal"> </param>
 
-             <param name="misfireThreshold"></param>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IOperableTrigger.Validate">
 
-             <summary>
 
-             Validates whether the properties of the <see cref="T:Quartz.IJobDetail"/> are
 
-             valid for submission into a <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IOperableTrigger.FireInstanceId">
 
-             <summary> 
 
-             This method should not be used by the Quartz client.
 
-             </summary>
 
-             <remarks>
 
-             Usable by <see cref="T:Quartz.Spi.IJobStore"/>
 
-             implementations, in order to facilitate 'recognizing' instances of fired
 
-             <see cref="T:Quartz.ITrigger"/> s as their jobs complete execution.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.GetPreviousFireTimeUtc">
 
-             <summary>
 
-             Returns the previous time at which the <see cref="T:Quartz.ITrigger"/> fired.
 
-             If the trigger has not yet fired, <see langword="null"/> will be returned.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.#ctor">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ITrigger"/> with no specified name, group, or <see cref="T:Quartz.IJobDetail"/>.
 
-             </summary>
 
-             <remarks>
 
-             Note that the <see cref="P:Quartz.Impl.Triggers.AbstractTrigger.Name"/>, <see cref="P:Quartz.Impl.Triggers.AbstractTrigger.Group"/> and
 
-             the <see cref="P:Quartz.Impl.Triggers.AbstractTrigger.JobName"/> and <see cref="P:Quartz.Impl.Triggers.AbstractTrigger.JobGroup"/> properties
 
-             must be set before the <see cref="T:Quartz.ITrigger"/> can be placed into a
 
-             <see cref="T:Quartz.IScheduler"/>.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.#ctor(System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ITrigger"/> with the given name, and default group.
 
-             </summary>
 
-             <remarks>
 
-             Note that the <see cref="P:Quartz.Impl.Triggers.AbstractTrigger.JobName"/> and <see cref="P:Quartz.Impl.Triggers.AbstractTrigger.JobGroup"/>
 
-             properties must be set before the <see cref="T:Quartz.ITrigger"/>
 
-             can be placed into a <see cref="T:Quartz.IScheduler"/>.
 
-             </remarks>
 
-             <param name="name">The name.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.#ctor(System.String,System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ITrigger"/> with the given name, and group.
 
-             </summary>
 
-             <remarks>
 
-             Note that the <see cref="P:Quartz.Impl.Triggers.AbstractTrigger.JobName"/> and <see cref="P:Quartz.Impl.Triggers.AbstractTrigger.JobGroup"/>
 
-             properties must be set before the <see cref="T:Quartz.ITrigger"/>
 
-             can be placed into a <see cref="T:Quartz.IScheduler"/>.
 
-             </remarks>
 
-             <param name="name">The name.</param>
 
-             <param name="group">if <see langword="null"/>, Scheduler.DefaultGroup will be used.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.#ctor(System.String,System.String,System.String,System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ITrigger"/> with the given name, and group.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="group">if <see langword="null"/>, Scheduler.DefaultGroup will be used.</param>
 
-             <param name="jobName">Name of the job.</param>
 
-             <param name="jobGroup">The job group.</param>
 
-             <exception cref="T:System.ArgumentException"> ArgumentException
 
-             if name is null or empty, or the group is an empty string.
 
-             </exception>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.Triggered(Quartz.ICalendar)">
 
-             <summary>
 
-             This method should not be used by the Quartz client.
 
-             </summary>
 
-             <remarks>
 
-             Called when the <see cref="T:Quartz.IScheduler"/> has decided to 'fire'
 
-             the trigger (Execute the associated <see cref="T:Quartz.IJob"/>), in order to
 
-             give the <see cref="T:Quartz.ITrigger"/> a chance to update itself for its next
 
-             triggering (if any).
 
-             </remarks>
 
-             <seealso cref="T:Quartz.JobExecutionException"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.ComputeFirstFireTimeUtc(Quartz.ICalendar)">
 
-             <summary>
 
-             This method should not be used by the Quartz client.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             Called by the scheduler at the time a <see cref="T:Quartz.ITrigger"/> is first
 
-             added to the scheduler, in order to have the <see cref="T:Quartz.ITrigger"/>
 
-             compute its first fire time, based on any associated calendar.
 
-             </para>
 
-             
 
-             <para>
 
-             After this method has been called, <see cref="M:Quartz.Impl.Triggers.AbstractTrigger.GetNextFireTimeUtc"/>
 
-             should return a valid answer.
 
-             </para>
 
-             </remarks>
 
-             <returns> 
 
-             The first time at which the <see cref="T:Quartz.ITrigger"/> will be fired
 
-             by the scheduler, which is also the same value <see cref="M:Quartz.Impl.Triggers.AbstractTrigger.GetNextFireTimeUtc"/>
 
-             will return (until after the first firing of the <see cref="T:Quartz.ITrigger"/>).
 
-             </returns>        
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.ExecutionComplete(Quartz.IJobExecutionContext,Quartz.JobExecutionException)">
 
-             <summary>
 
-             This method should not be used by the Quartz client.
 
-             </summary>
 
-             <remarks>
 
-             Called after the <see cref="T:Quartz.IScheduler"/> has executed the
 
-             <see cref="T:Quartz.IJobDetail"/> associated with the <see cref="T:Quartz.ITrigger"/>
 
-             in order to get the final instruction code from the trigger.
 
-             </remarks>
 
-             <param name="context">
 
-             is the <see cref="T:Quartz.IJobExecutionContext"/> that was used by the
 
-             <see cref="T:Quartz.IJob"/>'s<see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> method.</param>
 
-             <param name="result">is the <see cref="T:Quartz.JobExecutionException"/> thrown by the
 
-             <see cref="T:Quartz.IJob"/>, if any (may be null).
 
-             </param>
 
-             <returns>
 
-             One of the <see cref="T:Quartz.SchedulerInstruction"/> members.
 
-             </returns>
 
-             <seealso cref="T:Quartz.SchedulerInstruction"/>
 
-             <seealso cref="M:Quartz.Impl.Triggers.AbstractTrigger.Triggered(Quartz.ICalendar)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.GetMayFireAgain">
 
-             <summary> 
 
-             Used by the <see cref="T:Quartz.IScheduler"/> to determine whether or not
 
-             it is possible for this <see cref="T:Quartz.ITrigger"/> to fire again.
 
-             <para>
 
-             If the returned value is <see langword="false"/> then the <see cref="T:Quartz.IScheduler"/>
 
-             may remove the <see cref="T:Quartz.ITrigger"/> from the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.GetNextFireTimeUtc">
 
-              <summary>
 
-              Returns the next time at which the <see cref="T:Quartz.ITrigger"/> is scheduled to fire. If
 
-              the trigger will not fire again, <see langword="null"/> will be returned.  Note that
 
-              the time returned can possibly be in the past, if the time that was computed
 
-              for the trigger to next fire has already arrived, but the scheduler has not yet
 
-              been able to fire the trigger (which would likely be due to lack of resources
 
-              e.g. threads).
 
-              </summary>
 
-             <remarks>
 
-              The value returned is not guaranteed to be valid until after the <see cref="T:Quartz.ITrigger"/>
 
-              has been added to the scheduler.
 
-              </remarks>
 
-              <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.GetFireTimeAfter(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Returns the next time at which the <see cref="T:Quartz.ITrigger"/> will fire,
 
-             after the given time. If the trigger will not fire after the given time,
 
-             <see langword="null"/> will be returned.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.ValidateMisfireInstruction(System.Int32)">
 
-             <summary>
 
-             Validates the misfire instruction.
 
-             </summary>
 
-             <param name="misfireInstruction">The misfire instruction.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.UpdateAfterMisfire(Quartz.ICalendar)">
 
-             <summary> 
 
-             This method should not be used by the Quartz client.
 
-             <para>
 
-             To be implemented by the concrete classes that extend this class.
 
-             </para>
 
-             <para>
 
-             The implementation should update the <see cref="T:Quartz.ITrigger"/>'s state
 
-             based on the MISFIRE_INSTRUCTION_XXX that was selected when the <see cref="T:Quartz.ITrigger"/>
 
-             was created.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.UpdateWithNewCalendar(Quartz.ICalendar,System.TimeSpan)">
 
-             <summary> 
 
-             This method should not be used by the Quartz client.
 
-             <para>
 
-             The implementation should update the <see cref="T:Quartz.ITrigger"/>'s state
 
-             based on the given new version of the associated <see cref="T:Quartz.ICalendar"/>
 
-             (the state should be updated so that it's next fire time is appropriate
 
-             given the Calendar's new settings). 
 
-             </para>
 
-             </summary>
 
-             <param name="cal"> </param>
 
-             <param name="misfireThreshold"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.Validate">
 
-             <summary>
 
-             Validates whether the properties of the <see cref="T:Quartz.IJobDetail"/> are
 
-             valid for submission into a <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.ToString">
 
-             <summary>
 
-             Return a simple string representation of this object.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.CompareTo(Quartz.ITrigger)">
 
-             <summary>
 
-             Compare the next fire time of this <see cref="T:Quartz.ITrigger"/> to that of
 
-             another by comparing their keys, or in other words, sorts them
 
-             according to the natural (i.e. alphabetical) order of their keys.
 
-             </summary>
 
-             <param name="other"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.Equals(System.Object)">
 
-             <summary>
 
-             Determines whether the specified <see cref="T:System.Object"></see> is equal to the current <see cref="T:System.Object"></see>.
 
-             </summary>
 
-             <param name="obj">The <see cref="T:System.Object"></see> to compare with the current <see cref="T:System.Object"></see>.</param>
 
-             <returns>
 
-             true if the specified <see cref="T:System.Object"></see> is equal to the current <see cref="T:System.Object"></see>; otherwise, false.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.Equals(Quartz.Impl.Triggers.AbstractTrigger)">
 
-             <summary>
 
-             Trigger equality is based upon the equality of the TriggerKey.
 
-             </summary>
 
-             <param name="trigger"></param>
 
-             <returns>true if the key of this Trigger equals that of the given Trigger</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.GetHashCode">
 
-             <summary>
 
-             Serves as a hash function for a particular type. <see cref="M:System.Object.GetHashCode"></see> is suitable for use in hashing algorithms and data structures like a hash table.
 
-             </summary>
 
-             <returns>
 
-             A hash code for the current <see cref="T:System.Object"></see>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.Clone">
 
-             <summary>
 
-             Creates a new object that is a copy of the current instance.
 
-             </summary>
 
-             <returns>
 
-             A new object that is a copy of this instance.
 
-             </returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.Name">
 
-             <summary>
 
-             Get or sets the name of this <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException">If name is null or empty.</exception>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.Group">
 
-             <summary>
 
-             Get the group of this <see cref="T:Quartz.ITrigger"/>. If <see langword="null"/>, Scheduler.DefaultGroup will be used.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException"> 
 
-             if group is an empty string.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.JobName">
 
-             <summary>
 
-             Get or set the name of the associated <see cref="T:Quartz.IJobDetail"/>.
 
-             </summary> 
 
-             <exception cref="T:System.ArgumentException"> 
 
-             if jobName is null or empty.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.JobGroup">
 
-             <summary>
 
-             Gets or sets the name of the associated <see cref="T:Quartz.IJobDetail"/>'s
 
-             group. If set with <see langword="null"/>, Scheduler.DefaultGroup will be used.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException"> ArgumentException
 
-             if group is an empty string.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.FullName">
 
-             <summary>
 
-             Returns the 'full name' of the <see cref="T:Quartz.ITrigger"/> in the format
 
-             "group.name".
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.Key">
 
-             <summary>
 
-             Gets the key.
 
-             </summary>
 
-             <value>The key.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.FullJobName">
 
-             <summary>
 
-             Returns the 'full name' of the <see cref="T:Quartz.IJob"/> that the <see cref="T:Quartz.ITrigger"/>
 
-             points to, in the format "group.name".
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.Description">
 
-             <summary>
 
-             Get or set the description given to the <see cref="T:Quartz.ITrigger"/> instance by
 
-             its creator (if any).
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.CalendarName">
 
-             <summary>
 
-             Get or set  the <see cref="T:Quartz.ICalendar"/> with the given name with
 
-             this Trigger. Use <see langword="null"/> when setting to dis-associate a Calendar.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.JobDataMap">
 
-             <summary>
 
-             Get or set the <see cref="P:Quartz.Impl.Triggers.AbstractTrigger.JobDataMap"/> that is associated with the 
 
-             <see cref="T:Quartz.ITrigger"/>.
 
-             <para>
 
-             Changes made to this map during job execution are not re-persisted, and
 
-             in fact typically result in an illegal state.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.FinalFireTimeUtc">
 
-             <summary>
 
-             Returns the last UTC time at which the <see cref="T:Quartz.ITrigger"/> will fire, if
 
-             the Trigger will repeat indefinitely, null will be returned.
 
-             <para>
 
-             Note that the return time *may* be in the past.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.MisfireInstruction">
 
-             <summary>
 
-             Get or set the instruction the <see cref="T:Quartz.IScheduler"/> should be given for
 
-             handling misfire situations for this <see cref="T:Quartz.ITrigger"/>- the
 
-             concrete <see cref="T:Quartz.ITrigger"/> type that you are using will have
 
-             defined a set of additional MISFIRE_INSTRUCTION_XXX
 
-             constants that may be passed to this method.
 
-             <para>
 
-             If not explicitly set, the default value is <see cref="F:Quartz.MisfireInstruction.InstructionNotSet"/>.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="F:Quartz.MisfireInstruction.InstructionNotSet"/>
 
-             <seealso cref="M:Quartz.Impl.Triggers.AbstractTrigger.UpdateAfterMisfire(Quartz.ICalendar)"/>
 
-             <seealso cref="T:Quartz.ISimpleTrigger"/>
 
-             <seealso cref="T:Quartz.ICronTrigger"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.FireInstanceId">
 
-             <summary> 
 
-             This method should not be used by the Quartz client.
 
-             </summary>
 
-             <remarks>
 
-             Usable by <see cref="T:Quartz.Spi.IJobStore"/>
 
-             implementations, in order to facilitate 'recognizing' instances of fired
 
-             <see cref="T:Quartz.ITrigger"/> s as their jobs complete execution.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.EndTimeUtc">
 
-             <summary>
 
-             Gets and sets the date/time on which the trigger must stop firing. This 
 
-             defines the final boundary for trigger firings 舒 the trigger will
 
-             not fire after to this date and time. If this value is null, no end time
 
-             boundary is assumed, and the trigger can continue indefinitely.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.StartTimeUtc">
 
-             <summary>
 
-             The time at which the trigger's scheduling should start.  May or may not
 
-             be the first actual fire time of the trigger, depending upon the type of
 
-             trigger and the settings of the other properties of the trigger.  However
 
-             the first actual first time will not be before this date.
 
-             </summary>
 
-             <remarks>
 
-             Setting a value in the past may cause a new trigger to compute a first
 
-             fire time that is in the past, which may cause an immediate misfire
 
-             of the trigger.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.HasMillisecondPrecision">
 
-             <summary>
 
-             Tells whether this Trigger instance can handle events
 
-             in millisecond precision.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.Priority">
 
-             <summary>
 
-             The priority of a <see cref="T:Quartz.ITrigger"/> acts as a tie breaker such that if 
 
-             two <see cref="T:Quartz.ITrigger"/>s have the same scheduled fire time, then Quartz
 
-             will do its best to give the one with the higher priority first access 
 
-             to a worker thread.
 
-             </summary>
 
-             <remarks>
 
-             If not explicitly set, the default value is <i>5</i>.
 
-             </remarks>
 
-             <returns></returns>
 
-             <see cref="F:Quartz.TriggerConstants.DefaultPriority"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.HasAdditionalProperties">
 
-             <summary>
 
-             Gets a value indicating whether this instance has additional properties
 
-             that should be considered when for example saving to database. 
 
-             </summary>
 
-             <remarks>
 
-             If trigger implementation has additional properties that need to be saved 
 
-             with base properties you need to make your class override this property with value true.
 
-             Returning true will effectively mean that ADOJobStore needs to serialize 
 
-             this trigger instance to make sure additional properties are also saved.
 
-             </remarks>
 
-             <value>
 
-             	<c>true</c> if this instance has additional properties; otherwise, <c>false</c>.
 
-             </value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl">
 
-             <summary>
 
-              A concrete <see cref="T:Quartz.ITrigger"/> that is used to fire a <see cref="T:Quartz.IJobDetail"/>
 
-              based upon repeating calendar time intervals.
 
-              </summary>
 
-             <remarks>
 
-             The trigger will fire every N (see <see cref="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.RepeatInterval"/>) units of calendar time
 
-             (see <see cref="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.RepeatIntervalUnit"/>) as specified in the trigger's definition.  
 
-             This trigger can achieve schedules that are not possible with <see cref="T:Quartz.ISimpleTrigger"/> (e.g 
 
-             because months are not a fixed number of seconds) or <see cref="T:Quartz.ICronTrigger"/> (e.g. because
 
-             "every 5 months" is not an even divisor of 12).
 
-             <para>
 
-             If you use an interval unit of <see cref="F:Quartz.IntervalUnit.Month"/> then care should be taken when setting
 
-             a <see cref="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.StartTimeUtc"/> value that is on a day near the end of the month.  For example,
 
-             if you choose a start time that occurs on January 31st, and have a trigger with unit
 
-             <see cref="F:Quartz.IntervalUnit.Month"/> and interval 1, then the next fire time will be February 28th, 
 
-             and the next time after that will be March 28th - and essentially each subsequent firing will 
 
-             occur on the 28th of the month, even if a 31st day exists.  If you want a trigger that always
 
-             fires on the last day of the month - regardless of the number of days in the month, 
 
-             you should use <see cref="T:Quartz.ICronTrigger"/>.
 
-             </para> 
 
-             </remarks>
 
-             <see cref="T:Quartz.ITrigger"/>
 
-             <see cref="T:Quartz.ICronTrigger"/>
 
-             <see cref="T:Quartz.ISimpleTrigger"/>
 
-             <see cref="T:Quartz.IDailyTimeIntervalTrigger"/>
 
-             <since>2.0</since>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.ICalendarIntervalTrigger">
 
-             <summary>
 
-              A <see cref="T:Quartz.ITrigger"/> that is used to fire a <see cref="T:Quartz.IJobDetail"/>
 
-              based upon repeating calendar time intervals.
 
-              </summary>
 
-         </member>
 
-         <member name="P:Quartz.ICalendarIntervalTrigger.RepeatIntervalUnit">
 
-             <summary>
 
-             Get or set the interval unit - the time unit on with the interval applies.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ICalendarIntervalTrigger.RepeatInterval">
 
-             <summary>
 
-             Get the the time interval that will be added to the <see cref="T:Quartz.ICalendarIntervalTrigger"/>'s
 
-             fire time (in the set repeat interval unit) in order to calculate the time of the 
 
-             next trigger repeat.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ICalendarIntervalTrigger.TimesTriggered">
 
-             <summary>
 
-             Get the number of times the <see cref="T:Quartz.ICalendarIntervalTrigger"/> has already fired.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ICalendarIntervalTrigger.TimeZone">
 
-             <summary>
 
-             Gets the time zone within which time calculations related to this trigger will be performed.
 
-             </summary>
 
-             <remarks>
 
-             If null, the system default TimeZone will be used.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.ICalendarIntervalTrigger.PreserveHourOfDayAcrossDaylightSavings">
 
-             <summary>
 
-              If intervals are a day or greater, this property (set to true) will 
 
-              cause the firing of the trigger to always occur at the same time of day,
 
-              (the time of day of the startTime) regardless of daylight saving time 
 
-              transitions.  Default value is false.
 
-              </summary>
 
-              <remarks>
 
-              <para>
 
-              For example, without the property set, your trigger may have a start 
 
-              time of 9:00 am on March 1st, and a repeat interval of 2 days.  But 
 
-              after the daylight saving transition occurs, the trigger may start 
 
-              firing at 8:00 am every other day.
 
-              </para>
 
-              <para>
 
-              If however, the time of day does not exist on a given day to fire
 
-              (e.g. 2:00 am in the United States on the days of daylight saving
 
-              transition), the trigger will go ahead and fire one hour off on 
 
-              that day, and then resume the normal hour on other days.  If
 
-              you wish for the trigger to never fire at the "wrong" hour, then
 
-              you should set the property skipDayIfHourDoesNotExist.
 
-              </para>
 
-             </remarks>
 
-              <seealso cref="P:Quartz.ICalendarIntervalTrigger.SkipDayIfHourDoesNotExist"/>
 
-              <seealso cref="P:Quartz.ICalendarIntervalTrigger.TimeZone"/>
 
-              <seealso cref="M:Quartz.TriggerBuilder.StartAt(System.DateTimeOffset)"/>
 
-         </member>
 
-         <member name="P:Quartz.ICalendarIntervalTrigger.SkipDayIfHourDoesNotExist">
 
-             <summary>
 
-             If intervals are a day or greater, and 
 
-             preserveHourOfDayAcrossDaylightSavings property is set to true, and the
 
-             hour of the day does not exist on a given day for which the trigger 
 
-             would fire, the day will be skipped and the trigger advanced a second
 
-             interval if this property is set to true.  Defaults to false.
 
-             </summary>
 
-             <remarks>
 
-             <b>CAUTION!</b>  If you enable this property, and your hour of day happens 
 
-             to be that of daylight savings transition (e.g. 2:00 am in the United 
 
-             States) and the trigger's interval would have had the trigger fire on
 
-             that day, then you may actually completely miss a firing on the day of 
 
-             transition if that hour of day does not exist on that day!  In such a 
 
-             case the next fire time of the trigger will be computed as double (if 
 
-             the interval is 2 days, then a span of 4 days between firings will 
 
-             occur).
 
-             </remarks>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.PreserveHourOfDayAcrossDaylightSavings"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.#ctor">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ICalendarIntervalTrigger"/> with no settings.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.#ctor(System.String,Quartz.IntervalUnit,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl"/> that will occur immediately, and
 
-             repeat at the the given interval.
 
-             </summary>
 
-             <param name="name">Name for the trigger instance.</param>
 
-             <param name="intervalUnit">The repeat interval unit (minutes, days, months, etc).</param>
 
-             <param name="repeatInterval">The number of milliseconds to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.#ctor(System.String,System.String,Quartz.IntervalUnit,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ICalendarIntervalTrigger"/> that will occur immediately, and
 
-             repeat at the the given interval
 
-             </summary>
 
-             <param name="name">Name for the trigger instance.</param>
 
-             <param name="group">Group for the trigger instance.</param>
 
-             <param name="intervalUnit">The repeat interval unit (minutes, days, months, etc).</param>
 
-             <param name="repeatInterval">The number of milliseconds to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.#ctor(System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},Quartz.IntervalUnit,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ICalendarIntervalTrigger"/> that will occur at the given time,
 
-             and repeat at the the given interval until the given end time.
 
-             </summary>
 
-             <param name="name">Name for the trigger instance.</param>
 
-             <param name="startTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/> to fire.</param>
 
-             <param name="endTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/> to quit repeat firing.</param>
 
-             <param name="intervalUnit">The repeat interval unit (minutes, days, months, etc).</param>
 
-             <param name="repeatInterval">The number of milliseconds to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.#ctor(System.String,System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},Quartz.IntervalUnit,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ICalendarIntervalTrigger"/> that will occur at the given time,
 
-             and repeat at the the given interval until the given end time.
 
-             </summary>
 
-             <param name="name">Name for the trigger instance.</param>
 
-             <param name="group">Group for the trigger instance.</param>
 
-             <param name="startTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/> to fire.</param>
 
-             <param name="endTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/> to quit repeat firing.</param>
 
-             <param name="intervalUnit">The repeat interval unit (minutes, days, months, etc).</param>
 
-             <param name="repeatInterval">The number of milliseconds to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.#ctor(System.String,System.String,System.String,System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},Quartz.IntervalUnit,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ICalendarIntervalTrigger"/> that will occur at the given time,
 
-             and repeat at the the given interval until the given end time.
 
-             </summary>
 
-             <param name="name">Name for the trigger instance.</param>
 
-             <param name="group">Group for the trigger instance.</param>
 
-             <param name="jobName">Name of the associated job.</param>
 
-             <param name="jobGroup">Group of the associated job.</param>
 
-             <param name="startTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/> to fire.</param>
 
-             <param name="endTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/> to quit repeat firing.</param>
 
-             <param name="intervalUnit">The repeat interval unit (minutes, days, months, etc).</param>
 
-             <param name="repeatInterval">The number of milliseconds to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.ValidateMisfireInstruction(System.Int32)">
 
-             <summary>
 
-             Validates the misfire instruction.
 
-             </summary>
 
-             <param name="misfireInstruction">The misfire instruction.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.UpdateAfterMisfire(Quartz.ICalendar)">
 
-             <summary> 
 
-             Updates the <see cref="T:Quartz.ICalendarIntervalTrigger"/>'s state based on the
 
-             MisfireInstruction.XXX that was selected when the <see cref="T:Quartz.ICalendarIntervalTrigger"/>
 
-             was created.
 
-             </summary>
 
-             <remarks>
 
-             If the misfire instruction is set to <see cref="F:Quartz.MisfireInstruction.SmartPolicy"/>,
 
-             then the following scheme will be used:
 
-             <ul>
 
-                 <li>The instruction will be interpreted as <see cref="F:Quartz.MisfireInstruction.CalendarIntervalTrigger.FireOnceNow"/></li>
 
-             </ul>
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.Triggered(Quartz.ICalendar)">
 
-             <summary>
 
-             This method should not be used by the Quartz client.
 
-             <para>
 
-             Called when the <see cref="T:Quartz.IScheduler"/> has decided to 'fire'
 
-             the trigger (Execute the associated <see cref="T:Quartz.IJob"/>), in order to
 
-             give the <see cref="T:Quartz.ITrigger"/> a chance to update itself for its next
 
-             triggering (if any).
 
-             </para>
 
-             </summary>
 
-             <seealso cref="T:Quartz.JobExecutionException"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.UpdateWithNewCalendar(Quartz.ICalendar,System.TimeSpan)">
 
-             <summary> 
 
-             This method should not be used by the Quartz client.
 
-             <para>
 
-             The implementation should update the <see cref="T:Quartz.ITrigger"/>'s state
 
-             based on the given new version of the associated <see cref="T:Quartz.ICalendar"/>
 
-             (the state should be updated so that it's next fire time is appropriate
 
-             given the Calendar's new settings). 
 
-             </para>
 
-             </summary>
 
-             <param name="calendar"> </param>
 
-             <param name="misfireThreshold"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.ComputeFirstFireTimeUtc(Quartz.ICalendar)">
 
-             <summary>
 
-             This method should not be used by the Quartz client.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             Called by the scheduler at the time a <see cref="T:Quartz.ITrigger"/> is first
 
-             added to the scheduler, in order to have the <see cref="T:Quartz.ITrigger"/>
 
-             compute its first fire time, based on any associated calendar.
 
-             </para>
 
-             
 
-             <para>
 
-             After this method has been called, <see cref="M:Quartz.ITrigger.GetNextFireTimeUtc"/>
 
-             should return a valid answer.
 
-             </para>
 
-             </remarks>
 
-             <returns> 
 
-             The first time at which the <see cref="T:Quartz.ITrigger"/> will be fired
 
-             by the scheduler, which is also the same value <see cref="M:Quartz.ITrigger.GetNextFireTimeUtc"/>
 
-             will return (until after the first firing of the <see cref="T:Quartz.ITrigger"/>).
 
-             </returns>        
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.GetNextFireTimeUtc">
 
-              <summary>
 
-              Returns the next time at which the <see cref="T:Quartz.ITrigger"/> is scheduled to fire. If
 
-              the trigger will not fire again, <see langword="null"/> will be returned.  Note that
 
-              the time returned can possibly be in the past, if the time that was computed
 
-              for the trigger to next fire has already arrived, but the scheduler has not yet
 
-              been able to fire the trigger (which would likely be due to lack of resources
 
-              e.g. threads).
 
-              </summary>
 
-             <remarks>
 
-              The value returned is not guaranteed to be valid until after the <see cref="T:Quartz.ITrigger"/>
 
-              has been added to the scheduler.
 
-              </remarks>
 
-              <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.GetPreviousFireTimeUtc">
 
-             <summary>
 
-             Returns the previous time at which the <see cref="T:Quartz.ICalendarIntervalTrigger"/> fired.
 
-             If the trigger has not yet fired, <see langword="null"/> will be returned.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.GetFireTimeAfter(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Returns the next time at which the <see cref="T:Quartz.ICalendarIntervalTrigger"/> will fire,
 
-             after the given time. If the trigger will not fire after the given time,
 
-             <see langword="null"/> will be returned.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.GetMayFireAgain">
 
-             <summary>
 
-             Determines whether or not the <see cref="T:Quartz.ICalendarIntervalTrigger"/> will occur
 
-             again.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.Validate">
 
-             <summary>
 
-             Validates whether the properties of the <see cref="T:Quartz.IJobDetail"/> are
 
-             valid for submission into a <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.StartTimeUtc">
 
-             <summary>
 
-             Get the time at which the <see cref="T:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl"/> should occur.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.HasMillisecondPrecision">
 
-             <summary>
 
-             Tells whether this Trigger instance can handle events
 
-             in millisecond precision.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.EndTimeUtc">
 
-             <summary>
 
-             Get the time at which the <see cref="T:Quartz.ICalendarIntervalTrigger"/> should quit
 
-             repeating.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.RepeatIntervalUnit">
 
-             <summary>
 
-             Get or set the interval unit - the time unit on with the interval applies.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.RepeatInterval">
 
-             <summary>
 
-             Get the the time interval that will be added to the <see cref="T:Quartz.ICalendarIntervalTrigger"/>'s
 
-             fire time (in the set repeat interval unit) in order to calculate the time of the 
 
-             next trigger repeat.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.PreserveHourOfDayAcrossDaylightSavings">
 
-             <summary>
 
-              If intervals are a day or greater, this property (set to true) will 
 
-              cause the firing of the trigger to always occur at the same time of day,
 
-              (the time of day of the startTime) regardless of daylight saving time 
 
-              transitions.  Default value is false.
 
-              </summary>
 
-              <remarks>
 
-              <para>
 
-              For example, without the property set, your trigger may have a start 
 
-              time of 9:00 am on March 1st, and a repeat interval of 2 days.  But 
 
-              after the daylight saving transition occurs, the trigger may start 
 
-              firing at 8:00 am every other day.
 
-              </para>
 
-              <para>
 
-              If however, the time of day does not exist on a given day to fire
 
-              (e.g. 2:00 am in the United States on the days of daylight saving
 
-              transition), the trigger will go ahead and fire one hour off on 
 
-              that day, and then resume the normal hour on other days.  If
 
-              you wish for the trigger to never fire at the "wrong" hour, then
 
-              you should set the property skipDayIfHourDoesNotExist.
 
-              </para>
 
-             </remarks>
 
-              <seealso cref="P:Quartz.ICalendarIntervalTrigger.SkipDayIfHourDoesNotExist"/>
 
-              <seealso cref="P:Quartz.ICalendarIntervalTrigger.TimeZone"/>
 
-              <seealso cref="M:Quartz.TriggerBuilder.StartAt(System.DateTimeOffset)"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.SkipDayIfHourDoesNotExist">
 
-             <summary>
 
-             If intervals are a day or greater, and 
 
-             preserveHourOfDayAcrossDaylightSavings property is set to true, and the
 
-             hour of the day does not exist on a given day for which the trigger 
 
-             would fire, the day will be skipped and the trigger advanced a second
 
-             interval if this property is set to true.  Defaults to false.
 
-             </summary>
 
-             <remarks>
 
-             <b>CAUTION!</b>  If you enable this property, and your hour of day happens 
 
-             to be that of daylight savings transition (e.g. 2:00 am in the United 
 
-             States) and the trigger's interval would have had the trigger fire on
 
-             that day, then you may actually completely miss a firing on the day of 
 
-             transition if that hour of day does not exist on that day!  In such a 
 
-             case the next fire time of the trigger will be computed as double (if 
 
-             the interval is 2 days, then a span of 4 days between firings will 
 
-             occur).
 
-             </remarks>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.PreserveHourOfDayAcrossDaylightSavings"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.TimesTriggered">
 
-             <summary>
 
-             Get the number of times the <see cref="T:Quartz.ICalendarIntervalTrigger"/> has already fired.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.FinalFireTimeUtc">
 
-             <summary>
 
-             Returns the final time at which the <see cref="T:Quartz.ICalendarIntervalTrigger"/> will
 
-             fire, if there is no end time set, null will be returned.
 
-             </summary>
 
-             <value></value>
 
-             <remarks>Note that the return time may be in the past.</remarks>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Triggers.CronTriggerImpl">
 
-             <summary>
 
-             A concrete <see cref="T:Quartz.ITrigger"/> that is used to fire a <see cref="T:Quartz.IJobDetail"/>
 
-             at given moments in time, defined with Unix 'cron-like' definitions.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             For those unfamiliar with "cron", this means being able to create a firing
 
-             schedule such as: "At 8:00am every Monday through Friday" or "At 1:30am
 
-             every last Friday of the month".
 
-             </para>
 
-             
 
-             <para>
 
-             The format of a "Cron-Expression" string is documented on the 
 
-             <see cref="P:Quartz.Impl.Triggers.CronTriggerImpl.CronExpression"/> class.
 
-             </para>
 
-             
 
-             <para>
 
-             Here are some full examples: <br/>
 
-             <table cellspacing="8">
 
-             <tr>
 
-             <th align="left">Expression</th>
 
-             <th align="left"> </th>
 
-             <th align="left">Meaning</th>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 0 12 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 12pm (noon) every day" /></td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * *"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am every day" /></td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am every day" /></td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 * * ? *"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am every day" /></td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 * * ? 2005"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am every day during the year 2005" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 * 14 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire every minute starting at 2pm and ending at 2:59pm, every day" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 0/5 14 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire every 5 minutes starting at 2pm and ending at 2:55pm, every day" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 0/5 14,18 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire every 5 minutes starting at 2pm and ending at 2:55pm, AND fire every 5 minutes starting at 6pm and ending at 6:55pm, every day" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 0-5 14 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire every minute starting at 2pm and ending at 2:05pm, every day" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 10,44 14 ? 3 WED"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 2:10pm and at 2:44pm every Wednesday in the month of March." />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * MON-FRI"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am every Monday, Tuesday, Wednesday, Thursday and Friday" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 15 * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on the 15th day of every month" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 L * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on the last day of every month" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * 6L"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on the last Friday of every month" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * 6L"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on the last Friday of every month" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * 6L 2002-2005"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on every last Friday of every month during the years 2002, 2003, 2004 and 2005" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * 6#3"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on the third Friday of every month" />
 
-             </td>
 
-             </tr>
 
-             </table>
 
-             </para>
 
-             
 
-             <para>
 
-             Pay attention to the effects of '?' and '*' in the day-of-week and
 
-             day-of-month fields!
 
-             </para>
 
-             
 
-             <para>
 
-             <b>NOTES:</b>
 
-             <ul>
 
-             <li>Support for specifying both a day-of-week and a day-of-month value is
 
-             not complete (you'll need to use the '?' character in on of these fields).
 
-             </li>
 
-             <li>Be careful when setting fire times between mid-night and 1:00 AM -
 
-             "daylight savings" can cause a skip or a repeat depending on whether the
 
-             time moves back or jumps forward.</li>
 
-             </ul>
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <seealso cref="T:Quartz.ISimpleTrigger"/>
 
-             <author>Sharada Jambula</author>
 
-             <author>James House</author>
 
-             <author>Contributions from Mads Henderson</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.ICronTrigger">
 
-             <summary>
 
-             The public interface for inspecting settings specific to a CronTrigger, 
 
-             which is used to fire a <see cref="T:Quartz.IJob"/>
 
-             at given moments in time, defined with Unix 'cron-like' schedule definitions.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             For those unfamiliar with "cron", this means being able to create a firing
 
-             schedule such as: "At 8:00am every Monday through Friday" or "At 1:30am
 
-             every last Friday of the month".
 
-             </para>
 
-             
 
-             <para>
 
-             The format of a "Cron-Expression" string is documented on the 
 
-             <see cref="T:Quartz.CronExpression"/> class.
 
-             </para>
 
-             
 
-             <para>
 
-             Here are some full examples: <br/>
 
-             <table cellspacing="8">
 
-             <tr>
 
-             <th align="left">Expression</th>
 
-             <th align="left"> </th>
 
-             <th align="left">Meaning</th>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 0 12 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 12pm (noon) every day" /></td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * *"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am every day" /></td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am every day" /></td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 * * ? *"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am every day" /></td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 * * ? 2005"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am every day during the year 2005" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 * 14 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire every minute starting at 2pm and ending at 2:59pm, every day" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 0/5 14 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire every 5 minutes starting at 2pm and ending at 2:55pm, every day" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 0/5 14,18 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire every 5 minutes starting at 2pm and ending at 2:55pm, AND fire every 5 minutes starting at 6pm and ending at 6:55pm, every day" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 0-5 14 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire every minute starting at 2pm and ending at 2:05pm, every day" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 10,44 14 ? 3 WED"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 2:10pm and at 2:44pm every Wednesday in the month of March." />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * MON-FRI"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am every Monday, Tuesday, Wednesday, Thursday and Friday" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 15 * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on the 15th day of every month" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 L * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on the last day of every month" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * 6L"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on the last Friday of every month" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * 6L"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on the last Friday of every month" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * 6L 2002-2005"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on every last Friday of every month during the years 2002, 2003, 2004 and 2005" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * 6#3"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on the third Friday of every month" />
 
-             </td>
 
-             </tr>
 
-             </table>
 
-             </para>
 
-             
 
-             <para>
 
-             Pay attention to the effects of '?' and '*' in the day-of-week and
 
-             day-of-month fields!
 
-             </para>
 
-             
 
-             <para>
 
-             <b>NOTES:</b>
 
-             <ul>
 
-             <li>Support for specifying both a day-of-week and a day-of-month value is
 
-             not complete (you'll need to use the '?' character in on of these fields).
 
-             </li>
 
-             <li>Be careful when setting fire times between mid-night and 1:00 AM -
 
-             "daylight savings" can cause a skip or a repeat depending on whether the
 
-             time moves back or jumps forward.</li>
 
-             </ul>
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <seealso cref="T:Quartz.ISimpleTrigger"/>
 
-             <author>Sharada Jambula</author>
 
-             <author>James House</author>
 
-             <author>Contributions from Mads Henderson</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.ICronTrigger.GetExpressionSummary">
 
-             <summary>
 
-             Gets the expression summary.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.ICronTrigger.CronExpressionString">
 
-             <summary>
 
-             Gets or sets the cron expression string.
 
-             </summary>
 
-             <value>The cron expression string.</value>
 
-         </member>
 
-         <member name="P:Quartz.ICronTrigger.TimeZone">
 
-             <summary>
 
-             Sets the time zone for which the <see cref="P:Quartz.ICronTrigger.CronExpressionString"/> of this
 
-             <see cref="T:Quartz.ICronTrigger"/> will be resolved.
 
-             </summary>
 
-             <remarks>
 
-             If <see cref="P:Quartz.ICronTrigger.CronExpressionString"/> is set after this
 
-             property, the TimeZone setting on the CronExpression will "win".  However
 
-             if <see cref="P:Quartz.ICronTrigger.CronExpressionString"/> is set after this property, the
 
-             time zone applied by this method will remain in effect, since the 
 
-             string cron expression does not carry a time zone!
 
-             </remarks>
 
-             <value>The time zone.</value>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.#ctor">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.CronTriggerImpl"/> with no settings.
 
-             </summary>
 
-             <remarks>
 
-             The start-time will also be set to the current time, and the time zone
 
-             will be set the the system's default time zone.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.#ctor(System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.CronTriggerImpl"/> with the given name and default group.
 
-             </summary>
 
-             <remarks>
 
-             The start-time will also be set to the current time, and the time zone
 
-             will be set the the system's default time zone.
 
-             </remarks>
 
-             <param name="name">The name of the <see cref="T:Quartz.ITrigger"/></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.#ctor(System.String,System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.CronTriggerImpl"/> with the given name and group.
 
-             </summary>
 
-             <remarks>
 
-             The start-time will also be set to the current time, and the time zone
 
-             will be set the the system's default time zone.
 
-             </remarks>
 
-             <param name="name">The name of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="group">The group of the <see cref="T:Quartz.ITrigger"/></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.#ctor(System.String,System.String,System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.CronTriggerImpl"/> with the given name, group and
 
-             expression.
 
-             </summary>
 
-             <remarks>
 
-             The start-time will also be set to the current time, and the time zone
 
-             will be set the the system's default time zone.
 
-             </remarks>
 
-             <param name="name">The name of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="group">The group of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="cronExpression"> A cron expression dictating the firing sequence of the <see cref="T:Quartz.ITrigger"/></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.#ctor(System.String,System.String,System.String,System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.CronTriggerImpl"/> with the given name and group, and
 
-             associated with the identified <see cref="T:Quartz.IJobDetail"/>.
 
-             </summary>
 
-             <remarks>
 
-             The start-time will also be set to the current time, and the time zone
 
-             will be set the the system's default time zone.
 
-             </remarks>
 
-             <param name="name">The name of the <see cref="T:Quartz.ITrigger"/>.</param>
 
-             <param name="group">The group of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="jobName">name of the <see cref="T:Quartz.IJobDetail"/> executed on firetime</param>
 
-             <param name="jobGroup">Group of the <see cref="T:Quartz.IJobDetail"/> executed on firetime</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.#ctor(System.String,System.String,System.String,System.String,System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ICronTrigger"/> with the given name and group,
 
-             associated with the identified <see cref="T:Quartz.IJobDetail"/>,
 
-             and with the given "cron" expression.
 
-             </summary>
 
-             <remarks>
 
-             The start-time will also be set to the current time, and the time zone
 
-             will be set the the system's default time zone.
 
-             </remarks>
 
-             <param name="name">The name of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="group">The group of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="jobName">name of the <see cref="T:Quartz.IJobDetail"/> executed on firetime</param>
 
-             <param name="jobGroup">Group of the <see cref="T:Quartz.IJobDetail"/> executed on firetime</param>
 
-             <param name="cronExpression"> A cron expression dictating the firing sequence of the <see cref="T:Quartz.ITrigger"/></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.#ctor(System.String,System.String,System.String,System.String,System.String,System.TimeZoneInfo)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ICronTrigger"/> with the given name and group,
 
-             associated with the identified <see cref="T:Quartz.IJobDetail"/>,
 
-             and with the given "cron" expression resolved with respect to the <see cref="P:Quartz.Impl.Triggers.CronTriggerImpl.TimeZone"/>.
 
-             </summary>
 
-             <param name="name">The name of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="group">The group of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="jobName">name of the <see cref="T:Quartz.IJobDetail"/> executed on firetime</param>
 
-             <param name="jobGroup">Group of the <see cref="T:Quartz.IJobDetail"/> executed on firetime</param>
 
-             <param name="cronExpression"> A cron expression dictating the firing sequence of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="timeZone">
 
-             Specifies for which time zone the cronExpression should be interpreted, 
 
-             i.e. the expression 0 0 10 * * ?, is resolved to 10:00 am in this time zone.
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.#ctor(System.String,System.String,System.String,System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ICronTrigger"/> that will occur at the given time,
 
-             until the given end time.
 
-             <para>
 
-             If null, the start-time will also be set to the current time, the time
 
-             zone will be set the the system's default.
 
-             </para>
 
-             </summary>
 
-             <param name="name">The name of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="group">The group of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="jobName">name of the <see cref="T:Quartz.IJobDetail"/> executed on firetime</param>
 
-             <param name="jobGroup">Group of the <see cref="T:Quartz.IJobDetail"/> executed on firetime</param>
 
-             <param name="startTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the earliest time for the  <see cref="T:Quartz.ITrigger"/> to start firing.</param>
 
-             <param name="endTime">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/> to quit repeat firing.</param>
 
-             <param name="cronExpression"> A cron expression dictating the firing sequence of the <see cref="T:Quartz.ITrigger"/></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.#ctor(System.String,System.String,System.String,System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},System.String,System.TimeZoneInfo)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.CronTriggerImpl"/> with fire time dictated by the
 
-             <param name="cronExpression"/> resolved with respect to the specified
 
-             <param name="timeZone"/> occurring from the <see cref="F:Quartz.Impl.Triggers.CronTriggerImpl.startTimeUtc"/> until
 
-             the given <paran name="endTimeUtc"/>.
 
-             </summary>
 
-             <param name="name">The name of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="group">The group of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="jobName">name of the <see cref="T:Quartz.IJobDetail"/> executed on firetime</param>
 
-             <param name="jobGroup">Group of the <see cref="T:Quartz.IJobDetail"/> executed on firetime</param>
 
-             <param name="startTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the earliest time for the  <see cref="T:Quartz.ITrigger"/> to start firing.</param>
 
-             <param name="endTime">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/> to quit repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.Clone">
 
-             <summary>
 
-             Clones this instance.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.GetNextFireTimeUtc">
 
-              <summary>
 
-              Returns the next time at which the <see cref="T:Quartz.ITrigger"/> is scheduled to fire. If
 
-              the trigger will not fire again, <see langword="null"/> will be returned.  Note that
 
-              the time returned can possibly be in the past, if the time that was computed
 
-              for the trigger to next fire has already arrived, but the scheduler has not yet
 
-              been able to fire the trigger (which would likely be due to lack of resources
 
-              e.g. threads).
 
-              </summary>
 
-             <remarks>
 
-              The value returned is not guaranteed to be valid until after the <see cref="T:Quartz.ITrigger"/>
 
-              has been added to the scheduler.
 
-              </remarks>
 
-              <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.GetPreviousFireTimeUtc">
 
-             <summary>
 
-             Returns the previous time at which the <see cref="T:Quartz.ITrigger"/> fired.
 
-             If the trigger has not yet fired, <see langword="null"/> will be returned.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.SetNextFireTimeUtc(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Sets the next fire time.
 
-             <para>
 
-             <b>This method should not be invoked by client code.</b>
 
-             </para>
 
-             </summary>
 
-             <param name="fireTime">The fire time.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.SetPreviousFireTimeUtc(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Sets the previous fire time.
 
-             <para>
 
-             <b>This method should not be invoked by client code.</b>
 
-             </para>
 
-             </summary>
 
-             <param name="fireTime">The fire time.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.GetFireTimeAfter(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Returns the next time at which the <see cref="T:Quartz.ITrigger"/> will fire,
 
-             after the given time. If the trigger will not fire after the given time,
 
-             <see langword="null"/> will be returned.
 
-             </summary>
 
-             <param name="afterTimeUtc"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.GetMayFireAgain">
 
-             <summary>
 
-             Used by the <see cref="T:Quartz.IScheduler"/> to determine whether or not
 
-             it is possible for this <see cref="T:Quartz.ITrigger"/> to fire again.
 
-             <para>
 
-             If the returned value is <see langword="false"/> then the <see cref="T:Quartz.IScheduler"/>
 
-             may remove the <see cref="T:Quartz.ITrigger"/> from the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </para>
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.ValidateMisfireInstruction(System.Int32)">
 
-             <summary>
 
-             Validates the misfire instruction.
 
-             </summary>
 
-             <param name="misfireInstruction">The misfire instruction.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.UpdateAfterMisfire(Quartz.ICalendar)">
 
-             <summary>
 
-             This method should not be used by the Quartz client.
 
-             <para>
 
-             To be implemented by the concrete classes that extend this class.
 
-             </para>
 
-             <para>
 
-             The implementation should update the <see cref="T:Quartz.ITrigger"/>'s state
 
-             based on the MISFIRE_INSTRUCTION_XXX that was selected when the <see cref="T:Quartz.ITrigger"/>
 
-             was created.
 
-             </para>
 
-             </summary>
 
-             <param name="cal"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.WillFireOn(System.DateTimeOffset)">
 
-             <summary>
 
-             <para>
 
-             Determines whether the date and (optionally) time of the given Calendar 
 
-             instance falls on a scheduled fire-time of this trigger.
 
-             </para>
 
-             
 
-             <para>
 
-             Equivalent to calling <see cref="M:Quartz.Impl.Triggers.CronTriggerImpl.WillFireOn(System.DateTimeOffset,System.Boolean)"/>.
 
-             </para>
 
-             </summary>
 
-             <param name="test">The date to compare.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.WillFireOn(System.DateTimeOffset,System.Boolean)">
 
-             <summary>
 
-             Determines whether the date and (optionally) time of the given Calendar 
 
-             instance falls on a scheduled fire-time of this trigger.
 
-             <para>
 
-             Note that the value returned is NOT validated against the related
 
-             ICalendar (if any).
 
-             </para>
 
-             </summary>
 
-             <param name="test">The date to compare</param>
 
-             <param name="dayOnly">If set to true, the method will only determine if the
 
-             trigger will fire during the day represented by the given Calendar
 
-             (hours, minutes and seconds will be ignored).</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.Triggered(Quartz.ICalendar)">
 
-             <summary>
 
-             Called when the <see cref="T:Quartz.IScheduler"/> has decided to 'fire'
 
-             the trigger (Execute the associated <see cref="T:Quartz.IJob"/>), in order to
 
-             give the <see cref="T:Quartz.ITrigger"/> a chance to update itself for its next
 
-             triggering (if any).
 
-             </summary>
 
-             <param name="cal"></param>
 
-             <seealso cref="T:Quartz.JobExecutionException"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.UpdateWithNewCalendar(Quartz.ICalendar,System.TimeSpan)">
 
-             <summary>
 
-             Updates the trigger with new calendar.
 
-             </summary>
 
-             <param name="calendar">The calendar to update with.</param>
 
-             <param name="misfireThreshold">The misfire threshold.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.ComputeFirstFireTimeUtc(Quartz.ICalendar)">
 
-             <summary>
 
-             Called by the scheduler at the time a <see cref="T:Quartz.ITrigger"/> is first
 
-             added to the scheduler, in order to have the <see cref="T:Quartz.ITrigger"/>
 
-             compute its first fire time, based on any associated calendar.
 
-             <para>
 
-             After this method has been called, <see cref="M:Quartz.Impl.Triggers.CronTriggerImpl.GetNextFireTimeUtc"/>
 
-             should return a valid answer.
 
-             </para>
 
-             </summary>
 
-             <param name="cal"></param>
 
-             <returns>
 
-             the first time at which the <see cref="T:Quartz.ITrigger"/> will be fired
 
-             by the scheduler, which is also the same value <see cref="M:Quartz.Impl.Triggers.CronTriggerImpl.GetNextFireTimeUtc"/>
 
-             will return (until after the first firing of the <see cref="T:Quartz.ITrigger"/>).
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.GetExpressionSummary">
 
-             <summary>
 
-             Gets the expression summary.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.GetTimeAfter(System.DateTimeOffset)">
 
-             <summary>
 
-             Gets the next time to fire after the given time.
 
-             </summary>
 
-             <param name="afterTime">The time to compute from.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.GetTimeBefore(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             NOT YET IMPLEMENTED: Returns the time before the given time
 
-             that this <see cref="T:Quartz.ICronTrigger"/> will fire.
 
-             </summary>
 
-             <param name="date">The date.</param>
 
-             <returns></returns> 
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CronTriggerImpl.CronExpressionString">
 
-             <summary>
 
-             Gets or sets the cron expression string.
 
-             </summary>
 
-             <value>The cron expression string.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CronTriggerImpl.CronExpression">
 
-             <summary>
 
-             Set the CronExpression to the given one.  The TimeZone on the passed-in
 
-             CronExpression over-rides any that was already set on the Trigger.
 
-             </summary>
 
-             <value>The cron expression.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CronTriggerImpl.StartTimeUtc">
 
-             <summary>
 
-             Returns the date/time on which the trigger may begin firing. This
 
-             defines the initial boundary for trigger firings the trigger
 
-             will not fire prior to this date and time.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CronTriggerImpl.EndTimeUtc">
 
-             <summary>
 
-             Get or sets the time at which the <c>CronTrigger</c> should quit
 
-             repeating - even if repeastCount isn't yet satisfied. 
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CronTriggerImpl.TimeZone">
 
-             <summary>
 
-             Sets the time zone for which the <see cref="P:Quartz.ICronTrigger.CronExpressionString"/> of this
 
-             <see cref="T:Quartz.ICronTrigger"/> will be resolved.
 
-             </summary>
 
-             <remarks>
 
-             If <see cref="P:Quartz.ICronTrigger.CronExpressionString"/> is set after this
 
-             property, the TimeZone setting on the CronExpression will "win".  However
 
-             if <see cref="P:Quartz.Impl.Triggers.CronTriggerImpl.CronExpressionString"/> is set after this property, the
 
-             time zone applied by this method will remain in effect, since the 
 
-             string cron expression does not carry a time zone!
 
-             </remarks>
 
-             <value>The time zone.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CronTriggerImpl.FinalFireTimeUtc">
 
-             <summary>
 
-             Returns the last UTC time at which the <see cref="T:Quartz.ITrigger"/> will fire, if
 
-             the Trigger will repeat indefinitely, null will be returned.
 
-             <para>
 
-             Note that the return time *may* be in the past.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CronTriggerImpl.HasMillisecondPrecision">
 
-             <summary>
 
-             Tells whether this Trigger instance can handle events
 
-             in millisecond precision.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl">
 
-             <summary>
 
-             A concrete implementation of DailyTimeIntervalTrigger that is used to fire a <see cref="T:Quartz.IJobDetail"/>
 
-             based upon daily repeating time intervals.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The trigger will fire every N (<see cref="P:Quartz.IDailyTimeIntervalTrigger.RepeatInterval"/> ) seconds, minutes or hours
 
-             (see <see cref="P:Quartz.IDailyTimeIntervalTrigger.RepeatInterval"/>) during a given time window on specified days of the week.
 
-             </para>
 
-             <para>
 
-             For example#1, a trigger can be set to fire every 72 minutes between 8:00 and 11:00 everyday. It's fire times would
 
-             be 8:00, 9:12, 10:24, then next day would repeat: 8:00, 9:12, 10:24 again.
 
-             </para>
 
-             <para>
 
-             For example#2, a trigger can be set to fire every 23 minutes between 9:20 and 16:47 Monday through Friday.
 
-             </para>
 
-             <para>
 
-             On each day, the starting fire time is reset to startTimeOfDay value, and then it will add repeatInterval value to it until
 
-             the endTimeOfDay is reached. If you set daysOfWeek values, then fire time will only occur during those week days period. Again,
 
-             remember this trigger will reset fire time each day with startTimeOfDay, regardless of your interval or endTimeOfDay!
 
-             </para>
 
-             <para>
 
-             The default values for fields if not set are: startTimeOfDay defaults to 00:00:00, the endTimeOfDay default to 23:59:59,
 
-             and daysOfWeek is default to every day. The startTime default to current time-stamp now, while endTime has not value.
 
-             </para>
 
-             <para>
 
-             If startTime is before startTimeOfDay, then startTimeOfDay will be used and startTime has no affect other than to specify
 
-             the first day of firing. Else if startTime is  after startTimeOfDay, then the first fire time for that day will be the next
 
-             interval after the startTime. For example, if you set startingTimeOfDay=9am, endingTimeOfDay=11am, interval=15 mins, and startTime=9:33am, 
 
-             then the next fire time will be 9:45pm. Note also that if you do not set startTime value, the trigger builder will default to current time, and current time 
 
-             maybe before or after the startTimeOfDay! So be aware how you set your startTime.
 
-             </para>
 
-             <para>
 
-             This trigger also supports "repeatCount" feature to end the trigger fire time after
 
-             a certain number of count is reached. Just as the SimpleTrigger, setting repeatCount=0 
 
-             means trigger will fire once only! Setting any positive count then the trigger will repeat 
 
-             count + 1 times. Unlike SimpleTrigger, the default value of repeatCount of this trigger
 
-             is set to REPEAT_INDEFINITELY instead of 0 though.
 
-             </para>
 
-             </remarks>
 
-             <see cref="T:Quartz.IDailyTimeIntervalTrigger"/>
 
-             <see cref="T:Quartz.DailyTimeIntervalScheduleBuilder"/>
 
-             <since>2.0</since>
 
-             <author>James House</author>
 
-             <author>Zemian Deng saltnlight5@gmail.com</author>
 
-             <author>Nuno Maia (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.IDailyTimeIntervalTrigger">
 
-             <summary>
 
-             A <see cref="T:Quartz.ITrigger"/> that is used to fire a <see cref="T:Quartz.IJobDetail"/>
 
-             based upon daily repeating time intervals.
 
-             </summary>
 
-             <remarks>
 
-             <para>The trigger will fire every N (see <see cref="P:Quartz.IDailyTimeIntervalTrigger.RepeatInterval"/> ) seconds, minutes or hours
 
-             (see <see cref="P:Quartz.IDailyTimeIntervalTrigger.RepeatIntervalUnit"/> during a given time window on specified days of the week.</para>
 
-             
 
-             <para>For example#1, a trigger can be set to fire every 72 minutes between 8:00 and 11:00 everyday. It's fire times 
 
-             be 8:00, 9:12, 10:24, then next day would repeat: 8:00, 9:12, 10:24 again.</para>
 
-             
 
-             <para>For example#2, a trigger can be set to fire every 23 minutes between 9:20 and 16:47 Monday through Friday. </para>
 
-             
 
-             <para>On each day, the starting fire time is reset to startTimeOfDay value, and then it will add repeatInterval value to it until
 
-             the endTimeOfDay is reached. If you set daysOfWeek values, then fire time will only occur during those week days period.</para>
 
-             
 
-             <para>The default values for fields if not set are: startTimeOfDay defaults to 00:00:00, the endTimeOfDay default to 23:59:59, 
 
-             and daysOfWeek is default to every day. The startTime default to current time-stamp now, while endTime has not value.</para>
 
-             
 
-             <para>If startTime is before startTimeOfDay, then it has no affect. Else if startTime after startTimeOfDay, then the first fire time
 
-             for that day will be normal startTimeOfDay incremental values after startTime value. Same reversal logic is applied to endTime
 
-             with endTimeOfDay.</para>
 
-             </remarks>
 
-             <see cref="T:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl"/>
 
-             <see cref="T:Quartz.DailyTimeIntervalScheduleBuilder"/>
 
-             <author>James House</author>
 
-             <author>Zemian Deng saltnlight5@gmail.com</author>
 
-             <author>Nuno Maia (.NET)</author>
 
-         </member>
 
-         <member name="P:Quartz.IDailyTimeIntervalTrigger.RepeatCount">
 
-             <summary>
 
-             Get the the number of times for interval this trigger should repeat, 
 
-             after which it will be automatically deleted.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IDailyTimeIntervalTrigger.RepeatIntervalUnit">
 
-             <summary>
 
-             Get the interval unit - the time unit on with the interval applies.
 
-             The only intervals that are valid for this type of trigger are <see cref="F:Quartz.IntervalUnit.Second"/>,
 
-             <see cref="F:Quartz.IntervalUnit.Minute"/>, and <see cref="F:Quartz.IntervalUnit.Hour"/>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IDailyTimeIntervalTrigger.RepeatInterval">
 
-             <summary>
 
-             Get the the time interval that will be added to the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/>'s
 
-             fire time (in the set repeat interval unit) in order to calculate the time of the
 
-             next trigger repeat.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IDailyTimeIntervalTrigger.StartTimeOfDay">
 
-             <summary>
 
-             The time of day to start firing at the given interval.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IDailyTimeIntervalTrigger.EndTimeOfDay">
 
-             <summary>
 
-             The time of day to complete firing at the given interval.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IDailyTimeIntervalTrigger.DaysOfWeek">
 
-             <summary>
 
-             The days of the week upon which to fire.
 
-             </summary>
 
-             <returns>
 
-             A Set containing the integers representing the days of the week, per the values 0-6 as defined by
 
-             DayOfWees.Sunday - DayOfWeek.Saturday. 
 
-             </returns>
 
-         </member>
 
-         <member name="P:Quartz.IDailyTimeIntervalTrigger.TimesTriggered">
 
-             <summary>
 
-             Get the number of times the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> has already fired.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IDailyTimeIntervalTrigger.TimeZone">
 
-             <summary>
 
-             Gets the time zone within which time calculations related to this trigger will be performed.
 
-             </summary>
 
-             <remarks>
 
-             If null, the system default TimeZone will be used.
 
-             </remarks>
 
-         </member>
 
-         <member name="F:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.RepeatIndefinitely">
 
-             <summary>
 
-             Used to indicate the 'repeat count' of the trigger is indefinite. Or in
 
-             other words, the trigger should repeat continually until the trigger's
 
-             ending timestamp.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.#ctor">
 
-             <summary>
 
-             Create a  <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> with no settings.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.#ctor(System.String,Quartz.TimeOfDay,Quartz.TimeOfDay,Quartz.IntervalUnit,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> that will occur immediately, and
 
-             repeat at the the given interval.
 
-             </summary>
 
-             <param name="name"></param>
 
-             <param name="startTimeOfDayUtc">The <see cref="T:Quartz.TimeOfDay"/> that the repeating should begin occurring.</param>
 
-             <param name="endTimeOfDayUtc">The <see cref="T:Quartz.TimeOfDay"/> that the repeating should stop occurring.</param>
 
-             <param name="intervalUnit">The repeat interval unit. The only intervals that are valid for this type of trigger are
 
-             <see cref="F:Quartz.IntervalUnit.Second"/>, <see cref="F:Quartz.IntervalUnit.Minute"/>, and <see cref="F:Quartz.IntervalUnit.Hour"/>.</param>
 
-             <param name="repeatInterval"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.#ctor(System.String,System.String,Quartz.TimeOfDay,Quartz.TimeOfDay,Quartz.IntervalUnit,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> that will occur immediately, and
 
-             repeat at the the given interval.
 
-             </summary>
 
-             <param name="name"></param>
 
-             <param name="group"></param>
 
-             <param name="startTimeOfDayUtc">The <see cref="T:Quartz.TimeOfDay"/> that the repeating should begin occurring.</param>
 
-             <param name="endTimeOfDayUtc">The <see cref="T:Quartz.TimeOfDay"/> that the repeating should stop occurring.</param>
 
-             <param name="intervalUnit">The repeat interval unit. The only intervals that are valid for this type of trigger are
 
-             <see cref="F:Quartz.IntervalUnit.Second"/>, <see cref="F:Quartz.IntervalUnit.Minute"/>, and <see cref="F:Quartz.IntervalUnit.Hour"/>.</param>
 
-             <param name="repeatInterval"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.#ctor(System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},Quartz.TimeOfDay,Quartz.TimeOfDay,Quartz.IntervalUnit,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> that will occur at the given time,
 
-             and repeat at the the given interval until the given end time.
 
-             </summary>
 
-             <param name="name"></param>
 
-             <param name="startTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/>to fire.</param>
 
-             <param name="endTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/>to quit repeat firing.</param>
 
-             <param name="startTimeOfDayUtc">The <see cref="T:Quartz.TimeOfDay"/> that the repeating should begin occurring.</param>
 
-             <param name="endTimeOfDayUtc">The <see cref="T:Quartz.TimeOfDay"/> that the repeating should stop occurring.</param>
 
-             <param name="intervalUnit">The repeat interval unit. The only intervals that are valid for this type of trigger are
 
-             <see cref="F:Quartz.IntervalUnit.Second"/>, <see cref="F:Quartz.IntervalUnit.Minute"/>, and <see cref="F:Quartz.IntervalUnit.Hour"/>.</param>
 
-             <param name="repeatInterval">The number of milliseconds to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.#ctor(System.String,System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},Quartz.TimeOfDay,Quartz.TimeOfDay,Quartz.IntervalUnit,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> that will occur at the given time,
 
-             and repeat at the the given interval until the given end time.
 
-             </summary>
 
-             <param name="name"></param>
 
-             <param name="group"></param>
 
-             <param name="startTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/>to fire.</param>
 
-             <param name="endTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/>to quit repeat firing.</param>
 
-             <param name="startTimeOfDayUtc">The <see cref="T:Quartz.TimeOfDay"/> that the repeating should begin occurring.</param>
 
-             <param name="endTimeOfDayUtc">The <see cref="T:Quartz.TimeOfDay"/> that the repeating should stop occurring.</param>
 
-             <param name="intervalUnit">The repeat interval unit. The only intervals that are valid for this type of trigger are
 
-             <see cref="F:Quartz.IntervalUnit.Second"/>, <see cref="F:Quartz.IntervalUnit.Minute"/>, and <see cref="F:Quartz.IntervalUnit.Hour"/>.</param>
 
-             <param name="repeatInterval">The number of milliseconds to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.#ctor(System.String,System.String,System.String,System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},Quartz.TimeOfDay,Quartz.TimeOfDay,Quartz.IntervalUnit,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> that will occur at the given time,
 
-             fire the identified job and repeat at the the given
 
-             interval until the given end time.
 
-             </summary>
 
-             <param name="name"></param>
 
-             <param name="group"></param>
 
-             <param name="jobName"></param>
 
-             <param name="jobGroup"></param>
 
-             <param name="startTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/>to fire.</param>
 
-             <param name="endTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/>to quit repeat firing.</param>
 
-             <param name="startTimeOfDayUtc">The <see cref="T:Quartz.TimeOfDay"/> that the repeating should begin occurring.</param>
 
-             <param name="endTimeOfDayUtc">The <see cref="T:Quartz.TimeOfDay"/> that the repeating should stop occurring.</param>
 
-             <param name="intervalUnit">The repeat interval unit. The only intervals that are valid for this type of trigger are
 
-             <see cref="F:Quartz.IntervalUnit.Second"/>, <see cref="F:Quartz.IntervalUnit.Minute"/>, and <see cref="F:Quartz.IntervalUnit.Hour"/>.</param>
 
-             <param name="repeatInterval">The number of milliseconds to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.UpdateAfterMisfire(Quartz.ICalendar)">
 
-             <summary> 
 
-             Updates the <see cref="T:Quartz.ICalendarIntervalTrigger"/>'s state based on the
 
-             MisfireInstruction.XXX that was selected when the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/>
 
-             was created.
 
-             </summary>
 
-             <remarks>
 
-             If the misfire instruction is set to <see cref="F:Quartz.MisfireInstruction.SmartPolicy"/>,
 
-             then the following scheme will be used:
 
-             <ul>
 
-                 <li>The instruction will be interpreted as <see cref="F:Quartz.MisfireInstruction.DailyTimeIntervalTrigger.FireOnceNow"/></li>
 
-             </ul>
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.Triggered(Quartz.ICalendar)">
 
-             <summary>
 
-             Called when the scheduler has decided to 'fire'
 
-             the trigger (execute the associated job), in order to
 
-             give the trigger a chance to update itself for its next
 
-             triggering (if any).
 
-             </summary>
 
-             <param name="calendar"></param>
 
-             <see cref="M:Quartz.Impl.Triggers.AbstractTrigger.ExecutionComplete(Quartz.IJobExecutionContext,Quartz.JobExecutionException)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.UpdateWithNewCalendar(Quartz.ICalendar,System.TimeSpan)">
 
-             <summary>
 
-             
 
-             </summary>
 
-             <param name="calendar"></param>
 
-             <param name="misfireThreshold"></param>
 
-             <see cref="M:Quartz.Impl.Triggers.AbstractTrigger.UpdateWithNewCalendar(Quartz.ICalendar,System.TimeSpan)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.ComputeFirstFireTimeUtc(Quartz.ICalendar)">
 
-             <summary>
 
-             This method should not be used by the Quartz client.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             Called by the scheduler at the time a <see cref="T:Quartz.ITrigger"/> is first
 
-             added to the scheduler, in order to have the <see cref="T:Quartz.ITrigger"/>
 
-             compute its first fire time, based on any associated calendar.
 
-             </para>
 
-             
 
-             <para>
 
-             After this method has been called, <see cref="M:Quartz.ITrigger.GetNextFireTimeUtc"/>
 
-             should return a valid answer.
 
-             </para>
 
-             </remarks>
 
-             <returns> 
 
-             The first time at which the <see cref="T:Quartz.ITrigger"/> will be fired
 
-             by the scheduler, which is also the same value <see cref="M:Quartz.ITrigger.GetNextFireTimeUtc"/>
 
-             will return (until after the first firing of the <see cref="T:Quartz.ITrigger"/>).
 
-             </returns>        
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.GetNextFireTimeUtc">
 
-              <summary>
 
-              Returns the next time at which the <see cref="T:Quartz.ITrigger"/> is scheduled to fire. If
 
-              the trigger will not fire again, <see langword="null"/> will be returned.  Note that
 
-              the time returned can possibly be in the past, if the time that was computed
 
-              for the trigger to next fire has already arrived, but the scheduler has not yet
 
-              been able to fire the trigger (which would likely be due to lack of resources
 
-              e.g. threads).
 
-              </summary>
 
-             <remarks>
 
-              The value returned is not guaranteed to be valid until after the <see cref="T:Quartz.ITrigger"/>
 
-              has been added to the scheduler.
 
-              </remarks>
 
-              <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.GetPreviousFireTimeUtc">
 
-             <summary>
 
-             Returns the previous time at which the <see cref="T:Quartz.ICalendarIntervalTrigger"/> fired.
 
-             If the trigger has not yet fired, <see langword="null"/> will be returned.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.SetNextFireTimeUtc(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Set the next time at which the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> should fire.
 
-             </summary>
 
-             <remarks>
 
-             This method should not be invoked by client code.
 
-             </remarks>
 
-             <param name="value"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.SetPreviousFireTimeUtc(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Set the previous time at which the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> fired.
 
-             </summary>
 
-             <remarks>
 
-             This method should not be invoked by client code.
 
-             </remarks>
 
-             <param name="previousFireTimeUtc"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.GetFireTimeAfter(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Returns the next time at which the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> will
 
-             fire, after the given time. If the trigger will not fire after the given
 
-             time, <see langword="null"/> will be returned.
 
-             </summary>
 
-             <param name="afterTime"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.AdvanceToNextDayOfWeekIfNecessary(System.DateTimeOffset,System.Boolean)">
 
-             <summary>
 
-             Given fireTime time determine if it is on a valid day of week. If so, simply return it unaltered,
 
-             if not, advance to the next valid week day, and set the time of day to the start time of day.
 
-             </summary>
 
-             <param name="fireTime">given next fireTime.</param>
 
-             <param name="forceToAdvanceNextDay">flag to whether to advance day without check existing week day. This scenario
 
-             can happen when a caller determine fireTime has passed the endTimeOfDay that fireTime should move to next day anyway.
 
-             </param>
 
-             <returns>a next day fireTime.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.GetMayFireAgain">
 
-             <summary>
 
-             Determines whether or not the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> will occur
 
-             again.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.Validate">
 
-             <summary>
 
-             Validates whether the properties of the <see cref="T:Quartz.IJobDetail"/> are
 
-             valid for submission into a <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.GetScheduleBuilder">
 
-             <summary>
 
-             Get a <see cref="T:Quartz.IScheduleBuilder"/> that is configured to produce a 
 
-             schedule identical to this trigger's schedule.
 
-             </summary>
 
-             <returns></returns>
 
-             <see cref="T:Quartz.TriggerBuilder"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.StartTimeUtc">
 
-             <summary>
 
-             The time at which the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> should occur.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.EndTimeUtc">
 
-             <summary>
 
-             the time at which the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> should quit repeating.
 
-             </summary>
 
-             <see cref="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.FinalFireTimeUtc"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.RepeatCount">
 
-             <summary>
 
-             Get the the number of times for interval this trigger should repeat, 
 
-             after which it will be automatically deleted.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.RepeatIntervalUnit">
 
-             <summary>
 
-             the interval unit - the time unit on with the interval applies.
 
-             </summary>
 
-             <remarks>
 
-             The repeat interval unit. The only intervals that are valid for this type of trigger are
 
-             <see cref="F:Quartz.IntervalUnit.Second"/>, <see cref="F:Quartz.IntervalUnit.Minute"/>, and <see cref="F:Quartz.IntervalUnit.Hour"/>.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.RepeatInterval">
 
-             <summary>
 
-             the the time interval that will be added to the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/>'s
 
-             fire time (in the set repeat interval unit) in order to calculate the time of the
 
-             next trigger repeat.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.TimesTriggered">
 
-             <summary>
 
-             the number of times the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> has already
 
-             fired.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.FinalFireTimeUtc">
 
-             <summary>
 
-             Returns the final time at which the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> will
 
-             fire, if there is no end time set, null will be returned.
 
-             </summary>
 
-             <remarks>Note that the return time may be in the past.</remarks>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.DaysOfWeek">
 
-             <summary>
 
-             The days of the week upon which to fire.
 
-             </summary>
 
-             <returns>
 
-             A Set containing the integers representing the days of the week, per the values 0-6 as defined by
 
-             DayOfWees.Sunday - DayOfWeek.Saturday. 
 
-             </returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.StartTimeOfDay">
 
-             <summary>
 
-             The time of day to start firing at the given interval.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.EndTimeOfDay">
 
-             <summary>
 
-             The time of day to complete firing at the given interval.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.HasAdditionalProperties">
 
-             <summary>
 
-             This trigger has no additional properties besides what's defined in this class.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.HasMillisecondPrecision">
 
-             <summary>
 
-             Tells whether this Trigger instance can handle events
 
-             in millisecond precision.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Triggers.SimpleTriggerImpl">
 
-             <summary> 
 
-             A concrete <see cref="T:Quartz.ITrigger"/> that is used to fire a <see cref="T:Quartz.IJobDetail"/>
 
-             at a given moment in time, and optionally repeated at a specified interval.
 
-             </summary>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <seealso cref="T:Quartz.ICronTrigger"/>
 
-             <author>James House</author>
 
-             <author>Contributions by Lieven Govaerts of Ebitec Nv, Belgium.</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.ISimpleTrigger">
 
-             <summary> 
 
-             A <see cref="T:Quartz.ITrigger"/> that is used to fire a <see cref="T:Quartz.IJob"/>
 
-             at a given moment in time, and optionally repeated at a specified interval.
 
-             </summary>
 
-             <seealso cref="T:Quartz.TriggerBuilder"/>
 
-             <seealso cref="T:Quartz.SimpleScheduleBuilder"/>
 
-             <author>James House</author>
 
-             <author>Contributions by Lieven Govaerts of Ebitec Nv, Belgium.</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="P:Quartz.ISimpleTrigger.RepeatCount">
 
-             <summary>
 
-             Get or set thhe number of times the <see cref="T:Quartz.ISimpleTrigger"/> should
 
-             repeat, after which it will be automatically deleted.
 
-             </summary>
 
-             <seealso cref="F:Quartz.Impl.Triggers.SimpleTriggerImpl.RepeatIndefinitely"/>
 
-         </member>
 
-         <member name="P:Quartz.ISimpleTrigger.RepeatInterval">
 
-             <summary>
 
-             Get or set the the time interval at which the <see cref="T:Quartz.ISimpleTrigger"/> should repeat.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ISimpleTrigger.TimesTriggered">
 
-             <summary>
 
-             Get or set the number of times the <see cref="T:Quartz.ISimpleTrigger"/> has already
 
-             fired.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Impl.Triggers.SimpleTriggerImpl.RepeatIndefinitely">
 
-             <summary>
 
-             Used to indicate the 'repeat count' of the trigger is indefinite. Or in
 
-             other words, the trigger should repeat continually until the trigger's
 
-             ending timestamp.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.#ctor">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> with no settings.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.#ctor(System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> that will occur immediately, and
 
-             not repeat.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.#ctor(System.String,System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> that will occur immediately, and
 
-             not repeat.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.#ctor(System.String,System.Int32,System.TimeSpan)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> that will occur immediately, and
 
-             repeat at the the given interval the given number of times.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.#ctor(System.String,System.String,System.Int32,System.TimeSpan)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> that will occur immediately, and
 
-             repeat at the the given interval the given number of times.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.#ctor(System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> that will occur at the given time,
 
-             and not repeat.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.#ctor(System.String,System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> that will occur at the given time,
 
-             and not repeat.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.#ctor(System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},System.Int32,System.TimeSpan)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> that will occur at the given time,
 
-             and repeat at the the given interval the given number of times, or until
 
-             the given end time.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="startTimeUtc">A UTC <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/> to fire.</param>
 
-             <param name="endTimeUtc">A UTC <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/>
 
-             to quit repeat firing.</param>
 
-             <param name="repeatCount">The number of times for the <see cref="T:Quartz.ITrigger"/> to repeat
 
-             firing, use <see cref="F:Quartz.Impl.Triggers.SimpleTriggerImpl.RepeatIndefinitely"/> for unlimited times.</param>
 
-             <param name="repeatInterval">The time span to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.#ctor(System.String,System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},System.Int32,System.TimeSpan)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> that will occur at the given time,
 
-             and repeat at the the given interval the given number of times, or until
 
-             the given end time.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="group">The group.</param>
 
-             <param name="startTimeUtc">A UTC <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/> to fire.</param>
 
-             <param name="endTimeUtc">A UTC <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/>
 
-             to quit repeat firing.</param>
 
-             <param name="repeatCount">The number of times for the <see cref="T:Quartz.ITrigger"/> to repeat
 
-             firing, use <see cref="F:Quartz.Impl.Triggers.SimpleTriggerImpl.RepeatIndefinitely"/> for unlimited times.</param>
 
-             <param name="repeatInterval">The time span to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.#ctor(System.String,System.String,System.String,System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},System.Int32,System.TimeSpan)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> that will occur at the given time,
 
-             fire the identified <see cref="T:Quartz.IJob"/> and repeat at the the given
 
-             interval the given number of times, or until the given end time.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="group">The group.</param>
 
-             <param name="jobName">Name of the job.</param>
 
-             <param name="jobGroup">The job group.</param>
 
-             <param name="startTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/>
 
-             to fire.</param>
 
-             <param name="endTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/>
 
-             to quit repeat firing.</param>
 
-             <param name="repeatCount">The number of times for the <see cref="T:Quartz.ITrigger"/> to repeat
 
-             firing, use RepeatIndefinitely for unlimited times.</param>
 
-             <param name="repeatInterval">The time span to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.ValidateMisfireInstruction(System.Int32)">
 
-             <summary>
 
-             Validates the misfire instruction.
 
-             </summary>
 
-             <param name="misfireInstruction">The misfire instruction.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.UpdateAfterMisfire(Quartz.ICalendar)">
 
-             <summary>
 
-             Updates the <see cref="T:Quartz.ISimpleTrigger"/>'s state based on the
 
-             MisfireInstruction value that was selected when the <see cref="T:Quartz.ISimpleTrigger"/>
 
-             was created.
 
-             </summary>
 
-             <remarks>
 
-             If MisfireSmartPolicyEnabled is set to true,
 
-             then the following scheme will be used: <br/>
 
-             <ul>
 
-             <li>If the Repeat Count is 0, then the instruction will
 
-             be interpreted as <see cref="F:Quartz.MisfireInstruction.SimpleTrigger.FireNow"/>.</li>
 
-             <li>If the Repeat Count is <see cref="F:Quartz.Impl.Triggers.SimpleTriggerImpl.RepeatIndefinitely"/>, then
 
-             the instruction will be interpreted as <see cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNowWithRemainingRepeatCount"/>.
 
-             <b>WARNING:</b> using MisfirePolicy.SimpleTrigger.RescheduleNowWithRemainingRepeatCount 
 
-             with a trigger that has a non-null end-time may cause the trigger to 
 
-             never fire again if the end-time arrived during the misfire time span. 
 
-             </li>
 
-             <li>If the Repeat Count is > 0, then the instruction
 
-             will be interpreted as <see cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNowWithExistingRepeatCount"/>.
 
-             </li>
 
-             </ul>
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.Triggered(Quartz.ICalendar)">
 
-             <summary>
 
-             Called when the <see cref="T:Quartz.IScheduler"/> has decided to 'fire'
 
-             the trigger (Execute the associated <see cref="T:Quartz.IJob"/>), in order to
 
-             give the <see cref="T:Quartz.ITrigger"/> a chance to update itself for its next
 
-             triggering (if any).
 
-             </summary>
 
-             <seealso cref="T:Quartz.JobExecutionException"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.UpdateWithNewCalendar(Quartz.ICalendar,System.TimeSpan)">
 
-             <summary>
 
-             Updates the instance with new calendar.
 
-             </summary>
 
-             <param name="calendar">The calendar.</param>
 
-             <param name="misfireThreshold">The misfire threshold.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.ComputeFirstFireTimeUtc(Quartz.ICalendar)">
 
-             <summary>
 
-             Called by the scheduler at the time a <see cref="T:Quartz.ITrigger"/> is first
 
-             added to the scheduler, in order to have the <see cref="T:Quartz.ITrigger"/>
 
-             compute its first fire time, based on any associated calendar.
 
-             <para>
 
-             After this method has been called, <see cref="M:Quartz.Impl.Triggers.SimpleTriggerImpl.GetNextFireTimeUtc"/>
 
-             should return a valid answer.
 
-             </para>
 
-             </summary>
 
-             <returns> 
 
-             The first time at which the <see cref="T:Quartz.ITrigger"/> will be fired
 
-             by the scheduler, which is also the same value <see cref="M:Quartz.Impl.Triggers.SimpleTriggerImpl.GetNextFireTimeUtc"/>
 
-             will return (until after the first firing of the <see cref="T:Quartz.ITrigger"/>).
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.GetNextFireTimeUtc">
 
-             <summary>
 
-             Returns the next time at which the <see cref="T:Quartz.ISimpleTrigger"/> will
 
-             fire. If the trigger will not fire again, <see langword="null"/> will be
 
-             returned. The value returned is not guaranteed to be valid until after
 
-             the <see cref="T:Quartz.ITrigger"/> has been added to the scheduler.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.GetPreviousFireTimeUtc">
 
-             <summary>
 
-             Returns the previous time at which the <see cref="T:Quartz.ISimpleTrigger"/> fired.
 
-             If the trigger has not yet fired, <see langword="null"/> will be
 
-             returned.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.GetFireTimeAfter(System.Nullable{System.DateTimeOffset})">
 
-             <summary> 
 
-             Returns the next UTC time at which the <see cref="T:Quartz.ISimpleTrigger"/> will
 
-             fire, after the given UTC time. If the trigger will not fire after the given
 
-             time, <see langword="null"/> will be returned.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.GetFireTimeBefore(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Returns the last UTC time at which the <see cref="T:Quartz.ISimpleTrigger"/> will
 
-             fire, before the given time. If the trigger will not fire before the
 
-             given time, <see langword="null"/> will be returned.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.ComputeNumTimesFiredBetween(System.Nullable{System.DateTimeOffset},System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Computes the number of times fired between the two UTC date times.
 
-             </summary>
 
-             <param name="startTimeUtc">The UTC start date and time.</param>
 
-             <param name="endTimeUtc">The UTC end date and time.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.GetMayFireAgain">
 
-             <summary> 
 
-             Determines whether or not the <see cref="T:Quartz.ISimpleTrigger"/> will occur
 
-             again.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.Validate">
 
-             <summary>
 
-             Validates whether the properties of the <see cref="T:Quartz.IJobDetail"/> are
 
-             valid for submission into a <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.SimpleTriggerImpl.RepeatCount">
 
-             <summary>
 
-             Get or set thhe number of times the <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> should
 
-             repeat, after which it will be automatically deleted.
 
-             </summary>
 
-             <seealso cref="F:Quartz.Impl.Triggers.SimpleTriggerImpl.RepeatIndefinitely"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.SimpleTriggerImpl.RepeatInterval">
 
-             <summary>
 
-             Get or set the the time interval at which the <see cref="T:Quartz.ISimpleTrigger"/> should repeat.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.SimpleTriggerImpl.TimesTriggered">
 
-             <summary>
 
-             Get or set the number of times the <see cref="T:Quartz.ISimpleTrigger"/> has already
 
-             fired.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.SimpleTriggerImpl.FinalFireTimeUtc">
 
-             <summary> 
 
-             Returns the final UTC time at which the <see cref="T:Quartz.ISimpleTrigger"/> will
 
-             fire, if repeatCount is RepeatIndefinitely, null will be returned.
 
-             <para>
 
-             Note that the return time may be in the past.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.SimpleTriggerImpl.HasMillisecondPrecision">
 
-             <summary>
 
-             Tells whether this Trigger instance can handle events
 
-             in millisecond precision.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.DefaultThreadExecutor">
 
-             <summary>
 
-             Schedules work on a newly spawned thread. This is the default Quartz behavior.
 
-             </summary>
 
-             <author>matt.accola</author>
 
-         </member>
 
-         <member name="T:Quartz.Spi.IThreadExecutor">
 
-              <summary>
 
-              Allows different strategies for scheduling threads. The <see cref="M:Quartz.Spi.IThreadExecutor.Initialize"/>
 
-              method is required to be called before the first call to
 
-              <see cref="M:Quartz.Spi.IThreadExecutor.Execute(Quartz.QuartzThread)"/>. The Thread containing the work to be performed is
 
-              passed to execute and the work is scheduled by the underlying implementation.
 
-             </summary>
 
-              <author>matt.accola</author> 
 
-         </member>
 
-         <member name="M:Quartz.Spi.IThreadExecutor.Execute(Quartz.QuartzThread)">
 
-             <summary>
 
-             Submit a task for execution.
 
-             </summary>
 
-             <param name="thread">Thread to execute.</param>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IThreadExecutor.Initialize">
 
-             <summary>
 
-             Initialize any state prior to calling <see cref="M:Quartz.Spi.IThreadExecutor.Execute(Quartz.QuartzThread)"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.DirectSchedulerFactory">
 
-             <summary>
 
-             A singleton implementation of <see cref="T:Quartz.ISchedulerFactory"/>.
 
-             </summary>
 
-             <remarks>
 
-             Here are some examples of using this class:
 
-             <para>
 
-             To create a scheduler that does not write anything to the database (is not
 
-             persistent), you can call <see cref="M:Quartz.Impl.DirectSchedulerFactory.CreateVolatileScheduler(System.Int32)"/>:
 
-             </para>
 
-             <code>
 
-             DirectSchedulerFactory.Instance.CreateVolatileScheduler(10); // 10 threads 
 
-             // don't forget to start the scheduler: 
 
-             DirectSchedulerFactory.Instance.GetScheduler().Start();
 
-             </code>
 
-             <para>
 
-             Several create methods are provided for convenience. All create methods
 
-             eventually end up calling the create method with all the parameters:
 
-             </para>
 
-             <code>
 
-             public void CreateScheduler(string schedulerName, string schedulerInstanceId, IThreadPool threadPool, IJobStore jobStore)
 
-             </code>
 
-             <para>
 
-             Here is an example of using this method:
 
-             </para>
 
-             <code>
 
-             // create the thread pool 
 
-             SimpleThreadPool threadPool = new SimpleThreadPool(maxThreads, ThreadPriority.Normal); 
 
-             threadPool.Initialize(); 
 
-             // create the job store 
 
-             JobStore jobStore = new RAMJobStore(); 
 
-             
 
-             DirectSchedulerFactory.Instance.CreateScheduler("My Quartz Scheduler", "My Instance", threadPool, jobStore); 
 
-             // don't forget to start the scheduler: 
 
-             DirectSchedulerFactory.Instance.GetScheduler("My Quartz Scheduler", "My Instance").Start();
 
-             </code>
 
-             </remarks>>
 
-             <author>Mohammad Rezaei</author>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-             <seealso cref="T:Quartz.Spi.IJobStore"/>
 
-             <seealso cref="T:System.Threading.ThreadPool"/>
 
-         </member>
 
-         <member name="T:Quartz.ISchedulerFactory">
 
-             <summary>
 
-             Provides a mechanism for obtaining client-usable handles to <see cref="T:Quartz.IScheduler"/>
 
-             instances.
 
-             </summary>
 
-             <seealso cref="T:Quartz.IScheduler"/>
 
-             <seealso cref="T:Quartz.Impl.StdSchedulerFactory"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerFactory.GetScheduler">
 
-             <summary>
 
-             Returns a client-usable handle to a <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerFactory.GetScheduler(System.String)">
 
-             <summary>
 
-             Returns a handle to the Scheduler with the given name, if it exists.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ISchedulerFactory.AllSchedulers">
 
-             <summary>
 
-             Returns handles to all known Schedulers (made by any SchedulerFactory
 
-             within this app domain.).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.DirectSchedulerFactory"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.CreateVolatileScheduler(System.Int32)">
 
-             <summary>
 
-             Creates an in memory job store (<see cref="T:Quartz.Simpl.RAMJobStore"/>)
 
-             The thread priority is set to Thread.NORM_PRIORITY
 
-             </summary>
 
-             <param name="maxThreads">The number of threads in the thread pool</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.CreateRemoteScheduler(System.String)">
 
-             <summary>
 
-             Creates a proxy to a remote scheduler. This scheduler can be retrieved
 
-             via <see cref="M:Quartz.Impl.DirectSchedulerFactory.GetScheduler"/>.
 
-             </summary>
 
-             <throws>  SchedulerException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.CreateRemoteScheduler(System.String,System.String,System.String)">
 
-             <summary>
 
-             Same as <see cref="M:Quartz.Impl.DirectSchedulerFactory.CreateRemoteScheduler(System.String)"/>,
 
-             with the addition of specifying the scheduler name and instance ID. This
 
-             scheduler can only be retrieved via <see cref="M:Quartz.Impl.DirectSchedulerFactory.GetScheduler(System.String)"/>.
 
-             </summary>
 
-             <param name="schedulerName">The name for the scheduler.</param>
 
-             <param name="schedulerInstanceId">The instance ID for the scheduler.</param>
 
-             <param name="proxyAddress"></param>
 
-             <throws>  SchedulerException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.CreateScheduler(Quartz.Spi.IThreadPool,Quartz.Spi.IJobStore)">
 
-             <summary> 
 
-             Creates a scheduler using the specified thread pool and job store. This
 
-             scheduler can be retrieved via DirectSchedulerFactory#GetScheduler()
 
-             </summary>
 
-             <param name="threadPool">
 
-             The thread pool for executing jobs
 
-             </param>
 
-             <param name="jobStore">
 
-             The type of job store
 
-             </param>
 
-             <throws>  SchedulerException </throws>
 
-             <summary>           if initialization failed
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.CreateScheduler(System.String,System.String,Quartz.Spi.IThreadPool,Quartz.Spi.IJobStore)">
 
-             <summary>
 
-             Same as DirectSchedulerFactory#createScheduler(ThreadPool threadPool, JobStore jobStore),
 
-             with the addition of specifying the scheduler name and instance ID. This
 
-             scheduler can only be retrieved via DirectSchedulerFactory#getScheduler(String)
 
-             </summary>
 
-             <param name="schedulerName">The name for the scheduler.</param>
 
-             <param name="schedulerInstanceId">The instance ID for the scheduler.</param>
 
-             <param name="threadPool">The thread pool for executing jobs</param>
 
-             <param name="jobStore">The type of job store</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.CreateScheduler(System.String,System.String,Quartz.Spi.IThreadPool,Quartz.Spi.IJobStore,System.TimeSpan,System.TimeSpan)">
 
-             <summary>
 
-             Creates a scheduler using the specified thread pool and job store and
 
-             binds it for remote access.
 
-             </summary>
 
-             <param name="schedulerName">The name for the scheduler.</param>
 
-             <param name="schedulerInstanceId">The instance ID for the scheduler.</param>
 
-             <param name="threadPool">The thread pool for executing jobs</param>
 
-             <param name="jobStore">The type of job store</param>
 
-             <param name="idleWaitTime">The idle wait time. You can specify "-1" for
 
-             the default value, which is currently 30000 ms.</param>
 
-             <param name="dbFailureRetryInterval">The db failure retry interval.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.CreateScheduler(System.String,System.String,Quartz.Spi.IThreadPool,Quartz.Spi.IJobStore,System.Collections.Generic.IDictionary{System.String,Quartz.Spi.ISchedulerPlugin},System.TimeSpan,System.TimeSpan)">
 
-             <summary>
 
-             Creates a scheduler using the specified thread pool and job store and
 
-             binds it for remote access.
 
-             </summary>
 
-             <param name="schedulerName">The name for the scheduler.</param>
 
-             <param name="schedulerInstanceId">The instance ID for the scheduler.</param>
 
-             <param name="threadPool">The thread pool for executing jobs</param>
 
-             <param name="jobStore">The type of job store</param>
 
-             <param name="schedulerPluginMap"></param>
 
-             <param name="idleWaitTime">The idle wait time. You can specify TimeSpan.Zero for
 
-             the default value, which is currently 30000 ms.</param>
 
-             <param name="dbFailureRetryInterval">The db failure retry interval.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.CreateScheduler(System.String,System.String,Quartz.Spi.IThreadPool,Quartz.Spi.IThreadExecutor,Quartz.Spi.IJobStore,System.Collections.Generic.IDictionary{System.String,Quartz.Spi.ISchedulerPlugin},System.TimeSpan,System.TimeSpan)">
 
-             <summary>
 
-             Creates a scheduler using the specified thread pool and job store and
 
-             binds it for remote access.
 
-             </summary>
 
-             <param name="schedulerName">The name for the scheduler.</param>
 
-             <param name="schedulerInstanceId">The instance ID for the scheduler.</param>
 
-             <param name="threadPool">The thread pool for executing jobs</param>
 
-             <param name="threadExecutor">Thread executor.</param>
 
-             <param name="jobStore">The type of job store</param>
 
-             <param name="schedulerPluginMap"></param>
 
-             <param name="idleWaitTime">The idle wait time. You can specify TimeSpan.Zero for
 
-             the default value, which is currently 30000 ms.</param>
 
-             <param name="dbFailureRetryInterval">The db failure retry interval.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.CreateScheduler(System.String,System.String,Quartz.Spi.IThreadPool,Quartz.Spi.IThreadExecutor,Quartz.Spi.IJobStore,System.Collections.Generic.IDictionary{System.String,Quartz.Spi.ISchedulerPlugin},System.TimeSpan,System.Int32,System.TimeSpan)">
 
-             <summary>
 
-             Creates a scheduler using the specified thread pool and job store and
 
-             binds it for remote access.
 
-             </summary>
 
-             <param name="schedulerName">The name for the scheduler.</param>
 
-             <param name="schedulerInstanceId">The instance ID for the scheduler.</param>
 
-             <param name="threadPool">The thread pool for executing jobs</param>
 
-             <param name="threadExecutor">Thread executor.</param>
 
-             <param name="jobStore">The type of job store</param>
 
-             <param name="schedulerPluginMap"></param>
 
-             <param name="idleWaitTime">The idle wait time. You can specify TimeSpan.Zero for
 
-                 the default value, which is currently 30000 ms.</param>
 
-             <param name="maxBatchSize">The maximum batch size of triggers, when acquiring them</param>
 
-             <param name="batchTimeWindow">The time window for which it is allowed to "pre-acquire" triggers to fire</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.CreateScheduler(System.String,System.String,Quartz.Spi.IThreadPool,Quartz.Spi.IThreadExecutor,Quartz.Spi.IJobStore,System.Collections.Generic.IDictionary{System.String,Quartz.Spi.ISchedulerPlugin},System.TimeSpan,System.Int32,System.TimeSpan,Quartz.Spi.ISchedulerExporter)">
 
-             <summary>
 
-             Creates a scheduler using the specified thread pool and job store and
 
-             binds it for remote access.
 
-             </summary>
 
-             <param name="schedulerName">The name for the scheduler.</param>
 
-             <param name="schedulerInstanceId">The instance ID for the scheduler.</param>
 
-             <param name="threadPool">The thread pool for executing jobs</param>
 
-             <param name="threadExecutor">Thread executor.</param>
 
-             <param name="jobStore">The type of job store</param>
 
-             <param name="schedulerPluginMap"></param>
 
-             <param name="idleWaitTime">The idle wait time. You can specify TimeSpan.Zero for
 
-                 the default value, which is currently 30000 ms.</param>
 
-             <param name="maxBatchSize">The maximum batch size of triggers, when acquiring them</param>
 
-             <param name="batchTimeWindow">The time window for which it is allowed to "pre-acquire" triggers to fire</param>
 
-             <param name="schedulerExporter">The scheduler exporter to use</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.GetScheduler">
 
-             <summary>
 
-             Returns a handle to the Scheduler produced by this factory.
 
-             <para>
 
-             you must call createRemoteScheduler or createScheduler methods before
 
-             calling getScheduler()
 
-             </para>
 
-             </summary>
 
-             <returns></returns>
 
-             <throws>  SchedulerException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.GetScheduler(System.String)">
 
-             <summary>
 
-             Returns a handle to the Scheduler with the given name, if it exists.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.DirectSchedulerFactory.Log">
 
-             <summary>
 
-             Gets the log.
 
-             </summary>
 
-             <value>The log.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.DirectSchedulerFactory.Instance">
 
-             <summary>
 
-             Gets the instance.
 
-             </summary>
 
-             <value>The instance.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.DirectSchedulerFactory.AllSchedulers">
 
-             <summary> <para>
 
-             Returns a handle to all known Schedulers (made by any
 
-             StdSchedulerFactory instance.).
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.JobDetailImpl">
 
-             <summary>
 
-             Conveys the detail properties of a given job instance. 
 
-             </summary>
 
-             <remarks>
 
-             Quartz does not store an actual instance of a <see cref="T:Quartz.IJob"/> type, but
 
-             instead allows you to define an instance of one, through the use of a <see cref="T:Quartz.IJobDetail"/>.
 
-             <para>
 
-             <see cref="T:Quartz.IJob"/>s have a name and group associated with them, which
 
-             should uniquely identify them within a single <see cref="T:Quartz.IScheduler"/>.
 
-             </para>
 
-             <para>
 
-             <see cref="T:Quartz.ITrigger"/> s are the 'mechanism' by which <see cref="T:Quartz.IJob"/> s
 
-             are scheduled. Many <see cref="T:Quartz.ITrigger"/> s can point to the same <see cref="T:Quartz.IJob"/>,
 
-             but a single <see cref="T:Quartz.ITrigger"/> can only point to one <see cref="T:Quartz.IJob"/>.
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.DisallowConcurrentExecutionAttribute"/>
 
-             <seealso cref="T:Quartz.PersistJobDataAfterExecutionAttribute"/>
 
-             <seealso cref="P:Quartz.Impl.JobDetailImpl.JobDataMap"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.IJobDetail">
 
-             <summary>
 
-             Conveys the detail properties of a given job instance. 
 
-             JobDetails are to be created/defined with <see cref="T:Quartz.JobBuilder"/>.
 
-             </summary>
 
-             <remarks>
 
-             Quartz does not store an actual instance of a <see cref="T:Quartz.IJob"/> type, but
 
-             instead allows you to define an instance of one, through the use of a <see cref="T:Quartz.IJobDetail"/>.
 
-             <para>
 
-             <see cref="T:Quartz.IJob"/>s have a name and group associated with them, which
 
-             should uniquely identify them within a single <see cref="T:Quartz.IScheduler"/>.
 
-             </para>
 
-             <para>
 
-             <see cref="T:Quartz.ITrigger"/> s are the 'mechanism' by which <see cref="T:Quartz.IJob"/> s
 
-             are scheduled. Many <see cref="T:Quartz.ITrigger"/> s can point to the same <see cref="T:Quartz.IJob"/>,
 
-             but a single <see cref="T:Quartz.ITrigger"/> can only point to one <see cref="T:Quartz.IJob"/>.
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.DisallowConcurrentExecutionAttribute"/>
 
-             <seealso cref="T:Quartz.PersistJobDataAfterExecutionAttribute"/>
 
-             <seealso cref="T:Quartz.JobDataMap"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.IJobDetail.GetJobBuilder">
 
-             <summary>
 
-             Get a <see cref="T:Quartz.JobBuilder"/> that is configured to produce a 
 
-             <see cref="T:Quartz.IJobDetail"/> identical to this one.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobDetail.Key">
 
-             <summary>
 
-             The key that identifies this jobs uniquely.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobDetail.Description">
 
-             <summary>
 
-             Get or set the description given to the <see cref="T:Quartz.IJob"/> instance by its
 
-             creator (if any).
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobDetail.JobType">
 
-             <summary>
 
-             Get or sets the instance of <see cref="T:Quartz.IJob"/> that will be executed.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobDetail.JobDataMap">
 
-             <summary>
 
-             Get or set the <see cref="P:Quartz.IJobDetail.JobDataMap"/> that is associated with the <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobDetail.Durable">
 
-             <summary>
 
-             Whether or not the <see cref="T:Quartz.IJob"/> should remain stored after it is
 
-             orphaned (no <see cref="T:Quartz.ITrigger"/>s point to it).
 
-             </summary>
 
-             <remarks>
 
-             If not explicitly set, the default value is <see langword="false"/>.
 
-             </remarks>
 
-             <returns> 
 
-             <see langword="true"/> if the Job should remain persisted after being orphaned.
 
-             </returns>
 
-         </member>
 
-         <member name="P:Quartz.IJobDetail.PersistJobDataAfterExecution">
 
-             <summary>
 
-             Whether the associated Job class carries the <see cref="T:Quartz.PersistJobDataAfterExecutionAttribute"/>.
 
-             </summary>
 
-             <seealso cref="T:Quartz.PersistJobDataAfterExecutionAttribute"/>
 
-         </member>
 
-         <member name="P:Quartz.IJobDetail.ConcurrentExecutionDisallowed">
 
-             <summary>
 
-             Whether the associated Job class carries the <see cref="T:Quartz.DisallowConcurrentExecutionAttribute"/>.
 
-             </summary>
 
-             <seealso cref="T:Quartz.DisallowConcurrentExecutionAttribute"/>
 
-         </member>
 
-         <member name="P:Quartz.IJobDetail.RequestsRecovery">
 
-             <summary>
 
-             Set whether or not the the <see cref="T:Quartz.IScheduler"/> should re-Execute
 
-             the <see cref="T:Quartz.IJob"/> if a 'recovery' or 'fail-over' situation is
 
-             encountered.
 
-             </summary>
 
-             <remarks>
 
-             If not explicitly set, the default value is <see langword="false"/>.
 
-             </remarks>
 
-             <seealso cref="P:Quartz.IJobExecutionContext.Recovering"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.#ctor">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.IJobDetail"/> with no specified name or group, and
 
-             the default settings of all the other properties.
 
-             <para>
 
-             Note that the <see cref="P:Quartz.Impl.JobDetailImpl.Name"/>,<see cref="P:Quartz.Impl.JobDetailImpl.Group"/> and
 
-             <see cref="P:Quartz.Impl.JobDetailImpl.JobType"/> properties must be set before the job can be
 
-             placed into a <see cref="T:Quartz.IScheduler"/>.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.#ctor(System.String,System.Type)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.IJobDetail"/> with the given name, default group, and
 
-             the default settings of all the other properties.
 
-             If <see langword="null"/>, SchedulerConstants.DefaultGroup will be used.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException">
 
-             If name is null or empty, or the group is an empty string.
 
-             </exception>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.#ctor(System.String,System.String,System.Type)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.IJobDetail"/> with the given name, and group, and
 
-             the default settings of all the other properties.
 
-             If <see langword="null"/>, SchedulerConstants.DefaultGroup will be used.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException">
 
-             If name is null or empty, or the group is an empty string.
 
-             </exception>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.#ctor(System.String,System.String,System.Type,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.IJobDetail"/> with the given name, and group, and
 
-             the given settings of all the other properties.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="group">if <see langword="null"/>, SchedulerConstants.DefaultGroup will be used.</param>
 
-             <param name="jobType">Type of the job.</param>
 
-             <param name="isDurable">if set to <c>true</c>, job will be durable.</param>
 
-             <param name="requestsRecovery">if set to <c>true</c>, job will request recovery.</param>
 
-             <exception cref="T:System.ArgumentException"> 
 
-             ArgumentException if name is null or empty, or the group is an empty string.
 
-             </exception>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.Validate">
 
-             <summary> 
 
-             Validates whether the properties of the <see cref="T:Quartz.IJobDetail"/> are
 
-             valid for submission into a <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.ToString">
 
-             <summary>
 
-             Return a simple string representation of this object.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.Clone">
 
-             <summary>
 
-             Creates a new object that is a copy of the current instance.
 
-             </summary>
 
-             <returns>
 
-             A new object that is a copy of this instance.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.IsEqual(Quartz.Impl.JobDetailImpl)">
 
-             <summary>
 
-             Determines whether the specified detail is equal to this instance.
 
-             </summary>
 
-             <param name="detail">The detail to examine.</param>
 
-             <returns>
 
-             	<c>true</c> if the specified detail is equal; otherwise, <c>false</c>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.Equals(System.Object)">
 
-             <summary>
 
-             Determines whether the specified <see cref="T:System.Object"/> is equal to the current <see cref="T:System.Object"/>.
 
-             </summary>
 
-             <param name="obj">The <see cref="T:System.Object"/> to compare with the current <see cref="T:System.Object"/>.</param>
 
-             <returns>
 
-             	<see langword="true"/> if the specified <see cref="T:System.Object"/> is equal to the
 
-             current <see cref="T:System.Object"/>; otherwise, <see langword="false"/>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.Equals(Quartz.Impl.JobDetailImpl)">
 
-             <summary>
 
-             Checks equality between given job detail and this instance.
 
-             </summary>
 
-             <param name="detail">The detail to compare this instance with.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.GetHashCode">
 
-             <summary>
 
-             Serves as a hash function for a particular type, suitable
 
-             for use in hashing algorithms and data structures like a hash table.
 
-             </summary>
 
-             <returns>
 
-             A hash code for the current <see cref="T:System.Object"/>.
 
-             </returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.Name">
 
-             <summary>
 
-             Get or sets the name of this <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException"> 
 
-             if name is null or empty.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.Group">
 
-             <summary>
 
-             Get or sets the group of this <see cref="T:Quartz.IJob"/>. 
 
-             If <see langword="null"/>, <see cref="F:Quartz.SchedulerConstants.DefaultGroup"/> will be used.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException"> 
 
-             If the group is an empty string.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.FullName">
 
-             <summary> 
 
-             Returns the 'full name' of the <see cref="T:Quartz.ITrigger"/> in the format
 
-             "group.name".
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.Key">
 
-             <summary>
 
-             Gets the key.
 
-             </summary>
 
-             <value>The key.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.Description">
 
-             <summary>
 
-             Get or set the description given to the <see cref="T:Quartz.IJob"/> instance by its
 
-             creator (if any).
 
-             </summary>
 
-             <remarks>
 
-             May be useful for remembering/displaying the purpose of the job, though the
 
-             description has no meaning to Quartz.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.JobType">
 
-             <summary>
 
-             Get or sets the instance of <see cref="T:Quartz.IJob"/> that will be executed.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException"> 
 
-             if jobType is null or the class is not a <see cref="T:Quartz.IJob"/>.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.JobDataMap">
 
-             <summary>
 
-             Get or set the <see cref="P:Quartz.Impl.JobDetailImpl.JobDataMap"/> that is associated with the <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.RequestsRecovery">
 
-             <summary>
 
-             Set whether or not the the <see cref="T:Quartz.IScheduler"/> should re-Execute
 
-             the <see cref="T:Quartz.IJob"/> if a 'recovery' or 'fail-over' situation is
 
-             encountered.
 
-             <para>
 
-             If not explicitly set, the default value is <see langword="false"/>.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="P:Quartz.IJobExecutionContext.Recovering"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.Durable">
 
-             <summary>
 
-             Whether or not the <see cref="T:Quartz.IJob"/> should remain stored after it is
 
-             orphaned (no <see cref="T:Quartz.ITrigger"/>s point to it).
 
-             <para>
 
-             If not explicitly set, the default value is <see langword="false"/>.
 
-             </para>
 
-             </summary>
 
-             <returns> 
 
-             <see langword="true"/> if the Job should remain persisted after
 
-             being orphaned.
 
-             </returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.PersistJobDataAfterExecution">
 
-             <summary>
 
-             Whether the associated Job class carries the <see cref="P:Quartz.Impl.JobDetailImpl.PersistJobDataAfterExecution"/> attribute.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.ConcurrentExecutionDisallowed">
 
-             <summary>
 
-             Whether the associated Job class carries the <see cref="T:Quartz.DisallowConcurrentExecutionAttribute"/> attribute.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.JobExecutionContextImpl">
 
-             <summary>
 
-             A context bundle containing handles to various environment information, that
 
-             is given to a <see cref="P:Quartz.Impl.JobExecutionContextImpl.JobDetail"/> instance as it is
 
-             executed, and to a <see cref="T:Quartz.ITrigger"/> instance after the
 
-             execution completes.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The <see cref="T:Quartz.JobDataMap"/> found on this object (via the 
 
-             <see cref="P:Quartz.Impl.JobExecutionContextImpl.MergedJobDataMap"/> method) serves as a convenience -
 
-             it is a merge of the <see cref="T:Quartz.JobDataMap"/> found on the 
 
-             <see cref="P:Quartz.Impl.JobExecutionContextImpl.JobDetail"/> and the one found on the <see cref="T:Quartz.ITrigger"/>, with 
 
-             the value in the latter overriding any same-named values in the former.
 
-             <i>It is thus considered a 'best practice' that the Execute code of a Job
 
-             retrieve data from the JobDataMap found on this object</i> 
 
-             </para>
 
-             <para>
 
-             NOTE: Do not
 
-             expect value 'set' into this JobDataMap to somehow be set back onto a
 
-             job's own JobDataMap.
 
-             </para>
 
-             
 
-             <para>
 
-             <see cref="T:Quartz.IJobExecutionContext"/> s are also returned from the 
 
-             <see cref="M:Quartz.IScheduler.GetCurrentlyExecutingJobs"/>
 
-             method. These are the same instances as those past into the jobs that are
 
-             currently executing within the scheduler. The exception to this is when your
 
-             application is using Quartz remotely (i.e. via remoting or WCF) - in which case you get
 
-             a clone of the <see cref="T:Quartz.IJobExecutionContext"/>s, and their references to
 
-             the <see cref="T:Quartz.IScheduler"/> and <see cref="T:Quartz.IJob"/> instances have been lost (a
 
-             clone of the <see cref="P:Quartz.Impl.JobExecutionContextImpl.JobDetail"/> is still available - just not a handle
 
-             to the job instance that is running).
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="P:Quartz.Impl.JobExecutionContextImpl.JobDetail"/> 
 
-             <seealso cref="T:Quartz.IScheduler"/>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <seealso cref="T:Quartz.JobDataMap"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.IJobExecutionContext">
 
-             <summary>
 
-             A context bundle containing handles to various environment information, that
 
-             is given to a <see cref="P:Quartz.IJobExecutionContext.JobDetail"/> instance as it is
 
-             executed, and to a <see cref="T:Quartz.ITrigger"/> instance after the
 
-             execution completes.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IJobExecutionContext.Put(System.Object,System.Object)">
 
-             <summary> 
 
-             Put the specified value into the context's data map with the given key.
 
-             Possibly useful for sharing data between listeners and jobs.
 
-             <para>
 
-             NOTE: this data is volatile - it is lost after the job execution
 
-             completes, and all TriggerListeners and JobListeners have been 
 
-             notified.
 
-             </para> 
 
-             </summary>
 
-             <param name="key">
 
-             </param>
 
-             <param name="objectValue">
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.IJobExecutionContext.Get(System.Object)">
 
-             <summary> 
 
-             Get the value with the given key from the context's data map.
 
-             </summary>
 
-             <param name="key">
 
-             </param>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.Scheduler">
 
-             <summary>
 
-             Get a handle to the <see cref="T:Quartz.IScheduler"/> instance that fired the
 
-             <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.Trigger">
 
-             <summary>
 
-             Get a handle to the <see cref="T:Quartz.ITrigger"/> instance that fired the
 
-             <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.Calendar">
 
-             <summary>
 
-             Get a handle to the <see cref="T:Quartz.ICalendar"/> referenced by the <see cref="T:Quartz.ITrigger"/>
 
-             instance that fired the <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.Recovering">
 
-             <summary>
 
-             If the <see cref="T:Quartz.IJob"/> is being re-executed because of a 'recovery'
 
-             situation, this method will return <see langword="true"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.RecoveringTriggerKey">
 
-             <summary>
 
-             Returns the <see cref="T:Quartz.TriggerKey"/> of the originally scheduled and now recovering job.
 
-             </summary>
 
-             <remarks>
 
-             When recovering a previously failed job execution this property returns the identity
 
-             of the originally firing trigger. This recovering job will have been scheduled for 
 
-             the same firing time as the original job, and so is available via the
 
-             <see cref="P:Quartz.IJobExecutionContext.ScheduledFireTimeUtc"/> property. The original firing time of the job can be 
 
-             accessed via the <see cref="F:Quartz.SchedulerConstants.FailedJobOriginalTriggerFiretime"/>
 
-             element of this job's <see cref="T:Quartz.JobDataMap"/>.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.RefireCount">
 
-             <summary>
 
-             Gets the refire count.
 
-             </summary>
 
-             <value>The refire count.</value>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.MergedJobDataMap">
 
-             <summary>
 
-             Get the convenience <see cref="T:Quartz.JobDataMap"/> of this execution context.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The <see cref="T:Quartz.JobDataMap"/> found on this object serves as a convenience -
 
-             it is a merge of the <see cref="T:Quartz.JobDataMap"/> found on the 
 
-             <see cref="P:Quartz.IJobExecutionContext.JobDetail"/> and the one found on the <see cref="T:Quartz.ITrigger"/>, with 
 
-             the value in the latter overriding any same-named values in the former.
 
-             <i>It is thus considered a 'best practice' that the Execute code of a Job
 
-             retrieve data from the JobDataMap found on this object.</i>
 
-             </para>
 
-             <para>
 
-             NOTE: Do not expect value 'set' into this JobDataMap to somehow be 
 
-             set back onto a job's own JobDataMap.
 
-             </para>
 
-             <para>
 
-             Attempts to change the contents of this map typically result in an 
 
-             illegal state.
 
-             </para>
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.JobDetail">
 
-             <summary>
 
-             Get the <see cref="P:Quartz.IJobExecutionContext.JobDetail"/> associated with the <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.JobInstance">
 
-             <summary>
 
-             Get the instance of the <see cref="T:Quartz.IJob"/> that was created for this
 
-             execution.
 
-             <para>
 
-             Note: The Job instance is not available through remote scheduler
 
-             interfaces.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.FireTimeUtc">
 
-             <summary>
 
-             The actual time the trigger fired. For instance the scheduled time may
 
-             have been 10:00:00 but the actual fire time may have been 10:00:03 if
 
-             the scheduler was too busy.
 
-             </summary>
 
-             <returns> Returns the fireTimeUtc.</returns>
 
-             <seealso cref="P:Quartz.IJobExecutionContext.ScheduledFireTimeUtc"/>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.ScheduledFireTimeUtc">
 
-             <summary> 
 
-             The scheduled time the trigger fired for. For instance the scheduled
 
-             time may have been 10:00:00 but the actual fire time may have been
 
-             10:00:03 if the scheduler was too busy.
 
-             </summary>
 
-             <returns> Returns the scheduledFireTimeUtc.</returns>
 
-             <seealso cref="P:Quartz.IJobExecutionContext.FireTimeUtc"/>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.PreviousFireTimeUtc">
 
-             <summary>
 
-             Gets the previous fire time.
 
-             </summary>
 
-             <value>The previous fire time.</value>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.NextFireTimeUtc">
 
-             <summary>
 
-             Gets the next fire time.
 
-             </summary>
 
-             <value>The next fire time.</value>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.FireInstanceId">
 
-             <summary>
 
-             Get the unique Id that identifies this particular firing instance of the
 
-             trigger that triggered this job execution.  It is unique to this 
 
-             JobExecutionContext instance as well.
 
-             </summary>
 
-              <returns>the unique fire instance id</returns>
 
-             <seealso cref="M:Quartz.IScheduler.Interrupt(System.String)"/>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.Result">
 
-             <summary>
 
-             Returns the result (if any) that the <see cref="T:Quartz.IJob"/> set before its 
 
-             execution completed (the type of object set as the result is entirely up 
 
-             to the particular job).
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The result itself is meaningless to Quartz, but may be informative
 
-             to <see cref="T:Quartz.IJobListener"/>s or 
 
-             <see cref="T:Quartz.ITriggerListener"/>s that are watching the job's 
 
-             execution.
 
-             </para> 
 
-             
 
-             Set the result (if any) of the <see cref="T:Quartz.IJob"/>'s execution (the type of 
 
-             object set as the result is entirely up to the particular job).
 
-             
 
-             <para>
 
-             The result itself is meaningless to Quartz, but may be informative
 
-             to <see cref="T:Quartz.IJobListener"/>s or 
 
-             <see cref="T:Quartz.ITriggerListener"/>s that are watching the job's 
 
-             execution.
 
-             </para> 
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.JobRunTime">
 
-             <summary> 
 
-             The amount of time the job ran for.  The returned 
 
-             value will be <see cref="F:System.TimeSpan.MinValue"/> until the job has actually completed (or thrown an 
 
-             exception), and is therefore generally only useful to 
 
-             <see cref="T:Quartz.IJobListener"/>s and <see cref="T:Quartz.ITriggerListener"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobExecutionContextImpl.#ctor(Quartz.IScheduler,Quartz.Spi.TriggerFiredBundle,Quartz.IJob)">
 
-             <summary>
 
-             Create a JobExcecutionContext with the given context data.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobExecutionContextImpl.IncrementRefireCount">
 
-             <summary>
 
-             Increments the refire count.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobExecutionContextImpl.ToString">
 
-             <summary>
 
-             Returns a <see cref="T:System.String"/> that represents the current <see cref="T:System.Object"/>.
 
-             </summary>
 
-             <returns>
 
-             A <see cref="T:System.String"/> that represents the current <see cref="T:System.Object"/>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobExecutionContextImpl.Put(System.Object,System.Object)">
 
-             <summary> 
 
-             Put the specified value into the context's data map with the given key.
 
-             Possibly useful for sharing data between listeners and jobs.
 
-             <para>
 
-             NOTE: this data is volatile - it is lost after the job execution
 
-             completes, and all TriggerListeners and JobListeners have been 
 
-             notified.
 
-             </para> 
 
-             </summary>
 
-             <param name="key">
 
-             </param>
 
-             <param name="objectValue">
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobExecutionContextImpl.Get(System.Object)">
 
-             <summary> 
 
-             Get the value with the given key from the context's data map.
 
-             </summary>
 
-             <param name="key">
 
-             </param>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.Scheduler">
 
-             <summary>
 
-             Get a handle to the <see cref="T:Quartz.IScheduler"/> instance that fired the
 
-             <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.Trigger">
 
-             <summary>
 
-             Get a handle to the <see cref="T:Quartz.ITrigger"/> instance that fired the
 
-             <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.Calendar">
 
-             <summary>
 
-             Get a handle to the <see cref="T:Quartz.ICalendar"/> referenced by the <see cref="T:Quartz.ITrigger"/>
 
-             instance that fired the <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.Recovering">
 
-             <summary>
 
-             If the <see cref="T:Quartz.IJob"/> is being re-executed because of a 'recovery'
 
-             situation, this method will return <see langword="true"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.RefireCount">
 
-             <summary>
 
-             Gets the refire count.
 
-             </summary>
 
-             <value>The refire count.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.MergedJobDataMap">
 
-             <summary>
 
-             Get the convenience <see cref="T:Quartz.JobDataMap"/> of this execution context.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The <see cref="T:Quartz.JobDataMap"/> found on this object serves as a convenience -
 
-             it is a merge of the <see cref="T:Quartz.JobDataMap"/> found on the 
 
-             <see cref="P:Quartz.Impl.JobExecutionContextImpl.JobDetail"/> and the one found on the <see cref="T:Quartz.ITrigger"/>, with 
 
-             the value in the latter overriding any same-named values in the former.
 
-             <i>It is thus considered a 'best practice' that the Execute code of a Job
 
-             retrieve data from the JobDataMap found on this object.</i>
 
-             </para>
 
-             <para>
 
-             NOTE: Do not expect value 'set' into this JobDataMap to somehow be 
 
-             set back onto a job's own JobDataMap.
 
-             </para>
 
-             <para>
 
-             Attempts to change the contents of this map typically result in an 
 
-             illegal state.
 
-             </para>
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.JobDetail">
 
-             <summary>
 
-             Get the <see cref="P:Quartz.Impl.JobExecutionContextImpl.JobDetail"/> associated with the <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.JobInstance">
 
-             <summary>
 
-             Get the instance of the <see cref="T:Quartz.IJob"/> that was created for this
 
-             execution.
 
-             <para>
 
-             Note: The Job instance is not available through remote scheduler
 
-             interfaces.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.FireTimeUtc">
 
-             <summary>
 
-             The actual time the trigger fired. For instance the scheduled time may
 
-             have been 10:00:00 but the actual fire time may have been 10:00:03 if
 
-             the scheduler was too busy.
 
-             </summary>
 
-             <returns> Returns the fireTimeUtc.</returns>
 
-             <seealso cref="P:Quartz.Impl.JobExecutionContextImpl.ScheduledFireTimeUtc"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.ScheduledFireTimeUtc">
 
-             <summary> 
 
-             The scheduled time the trigger fired for. For instance the scheduled
 
-             time may have been 10:00:00 but the actual fire time may have been
 
-             10:00:03 if the scheduler was too busy.
 
-             </summary>
 
-             <returns> Returns the scheduledFireTimeUtc.</returns>
 
-             <seealso cref="P:Quartz.Impl.JobExecutionContextImpl.FireTimeUtc"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.PreviousFireTimeUtc">
 
-             <summary>
 
-             Gets the previous fire time.
 
-             </summary>
 
-             <value>The previous fire time.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.NextFireTimeUtc">
 
-             <summary>
 
-             Gets the next fire time.
 
-             </summary>
 
-             <value>The next fire time.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.Result">
 
-             <summary>
 
-             Returns the result (if any) that the <see cref="T:Quartz.IJob"/> set before its 
 
-             execution completed (the type of object set as the result is entirely up 
 
-             to the particular job).
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The result itself is meaningless to Quartz, but may be informative
 
-             to <see cref="T:Quartz.IJobListener"/>s or 
 
-             <see cref="T:Quartz.ITriggerListener"/>s that are watching the job's 
 
-             execution.
 
-             </para> 
 
-             
 
-             Set the result (if any) of the <see cref="T:Quartz.IJob"/>'s execution (the type of 
 
-             object set as the result is entirely up to the particular job).
 
-             
 
-             <para>
 
-             The result itself is meaningless to Quartz, but may be informative
 
-             to <see cref="T:Quartz.IJobListener"/>s or 
 
-             <see cref="T:Quartz.ITriggerListener"/>s that are watching the job's 
 
-             execution.
 
-             </para> 
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.JobRunTime">
 
-             <summary> 
 
-             The amount of time the job ran for.  The returned 
 
-             value will be <see cref="F:System.TimeSpan.MinValue"/> until the job has actually completed (or thrown an 
 
-             exception), and is therefore generally only useful to 
 
-             <see cref="T:Quartz.IJobListener"/>s and <see cref="T:Quartz.ITriggerListener"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.FireInstanceId">
 
-             <summary>
 
-             Returns the fire instace id.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.RemoteScheduler">
 
-             <summary>
 
-             An implementation of the <see cref="T:Quartz.IScheduler"/> interface that remotely
 
-             proxies all method calls to the equivalent call on a given <see cref="T:Quartz.Core.QuartzScheduler"/>
 
-             instance, via remoting or similar technology.
 
-             </summary>
 
-             <seealso cref="T:Quartz.IScheduler"/>
 
-             <seealso cref="T:Quartz.Core.QuartzScheduler"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.IScheduler">
 
-             <summary>
 
-             This is the main interface of a Quartz Scheduler.
 
-             </summary>
 
-             <remarks>
 
-             	<para>
 
-                     A <see cref="T:Quartz.IScheduler"/> maintains a registry of
 
-                     <see cref="T:Quartz.IJobDetail"/>s and <see cref="T:Quartz.ITrigger"/>s. Once
 
-                     registered, the <see cref="T:Quartz.IScheduler"/> is responsible for executing
 
-                     <see cref="T:Quartz.IJob"/> s when their associated <see cref="T:Quartz.ITrigger"/> s
 
-                     fire (when their scheduled time arrives).
 
-                 </para>
 
-             	<para>
 
-             		<see cref="T:Quartz.IScheduler"/> instances are produced by a
 
-                     <see cref="T:Quartz.ISchedulerFactory"/>. A scheduler that has already been
 
-                     created/initialized can be found and used through the same factory that
 
-                     produced it. After a <see cref="T:Quartz.IScheduler"/> has been created, it is in
 
-                     "stand-by" mode, and must have its <see cref="M:Quartz.IScheduler.Start"/> method
 
-                     called before it will fire any <see cref="T:Quartz.IJob"/>s.
 
-                 </para>
 
-             	<para>
 
-             		<see cref="T:Quartz.IJob"/> s are to be created by the 'client program', by
 
-                     defining a class that implements the <see cref="T:Quartz.IJob"/> interface.
 
-                     <see cref="T:Quartz.IJobDetail"/> objects are then created (also by the client) to
 
-                     define a individual instances of the <see cref="T:Quartz.IJob"/>.
 
-                     <see cref="T:Quartz.IJobDetail"/> instances can then be registered with the
 
-                     <see cref="T:Quartz.IScheduler"/> via the %IScheduler.ScheduleJob(JobDetail,
 
-                     Trigger)% or %IScheduler.AddJob(JobDetail, bool)% method.
 
-                 </para>
 
-             	<para>
 
-             		<see cref="T:Quartz.ITrigger"/> s can then be defined to fire individual
 
-                     <see cref="T:Quartz.IJob"/> instances based on given schedules.
 
-                     <see cref="T:Quartz.ISimpleTrigger"/> s are most useful for one-time firings, or
 
-                     firing at an exact moment in time, with N repeats with a given delay between
 
-                     them. <see cref="T:Quartz.ICronTrigger"/> s allow scheduling based on time of day,
 
-                     day of week, day of month, and month of year.
 
-                 </para>
 
-             	<para>
 
-             		<see cref="T:Quartz.IJob"/> s and <see cref="T:Quartz.ITrigger"/> s have a name and
 
-                     group associated with them, which should uniquely identify them within a single
 
-                     <see cref="T:Quartz.IScheduler"/>. The 'group' feature may be useful for creating
 
-                     logical groupings or categorizations of <see cref="T:Quartz.IJob"/>s and
 
-                     <see cref="T:Quartz.ITrigger"/>s. If you don't have need for assigning a group to a
 
-                     given <see cref="T:Quartz.IJob"/>s of <see cref="T:Quartz.ITrigger"/>s, then you can use
 
-                     the <see cref="F:Quartz.SchedulerConstants.DefaultGroup"/> constant defined on
 
-                     this interface.
 
-                 </para>
 
-             	<para>
 
-                     Stored <see cref="T:Quartz.IJob"/> s can also be 'manually' triggered through the
 
-                     use of the %IScheduler.TriggerJob(string, string)% function.
 
-                 </para>
 
-             	<para>
 
-                     Client programs may also be interested in the 'listener' interfaces that are
 
-                     available from Quartz. The <see cref="T:Quartz.IJobListener"/> interface provides
 
-                     notifications of <see cref="T:Quartz.IJob"/> executions. The
 
-                     <see cref="T:Quartz.ITriggerListener"/> interface provides notifications of
 
-                     <see cref="T:Quartz.ITrigger"/> firings. The <see cref="T:Quartz.ISchedulerListener"/>
 
-                     interface provides notifications of <see cref="T:Quartz.IScheduler"/> events and
 
-                     errors.  Listeners can be associated with local schedulers through the
 
-                     <see cref="T:Quartz.IListenerManager"/> interface.  
 
-                 </para>
 
-             	<para>
 
-                     The setup/configuration of a <see cref="T:Quartz.IScheduler"/> instance is very
 
-                     customizable. Please consult the documentation distributed with Quartz.
 
-                 </para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.IJobDetail"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <seealso cref="T:Quartz.IJobListener"/>
 
-             <seealso cref="T:Quartz.ITriggerListener"/>
 
-             <seealso cref="T:Quartz.ISchedulerListener"/>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.IsJobGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given JobGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.IsTriggerGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given TriggerGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetMetaData">
 
-             <summary>
 
-             Get a <see cref="T:Quartz.SchedulerMetaData"/> object describing the settings
 
-             and capabilities of the scheduler instance.
 
-             </summary>
 
-             <remarks>
 
-             Note that the data returned is an 'instantaneous' snap-shot, and that as
 
-             soon as it's returned, the meta data values may be different.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetCurrentlyExecutingJobs">
 
-             <summary>
 
-             Return a list of <see cref="T:Quartz.IJobExecutionContext"/> objects that
 
-             represent all currently executing Jobs in this Scheduler instance.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             This method is not cluster aware.  That is, it will only return Jobs
 
-             currently executing in this Scheduler instance, not across the entire
 
-             cluster.
 
-             </para>
 
-             <para>
 
-             Note that the list returned is an 'instantaneous' snap-shot, and that as
 
-             soon as it's returned, the true list of executing jobs may be different.
 
-             Also please read the doc associated with <see cref="T:Quartz.IJobExecutionContext"/>-
 
-             especially if you're using remoting.
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IJobExecutionContext"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetJobGroupNames">
 
-             <summary>
 
-             Get the names of all known <see cref="T:Quartz.IJobDetail"/> groups.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetTriggerGroupNames">
 
-             <summary>
 
-             Get the names of all known <see cref="T:Quartz.ITrigger"/> groups.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetPausedTriggerGroups">
 
-             <summary> 
 
-             Get the names of all <see cref="T:Quartz.ITrigger"/> groups that are paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.Start">
 
-             <summary>
 
-             Starts the <see cref="T:Quartz.IScheduler"/>'s threads that fire <see cref="T:Quartz.ITrigger"/>s.
 
-             When a scheduler is first created it is in "stand-by" mode, and will not
 
-             fire triggers.  The scheduler can also be put into stand-by mode by
 
-             calling the <see cref="M:Quartz.IScheduler.Standby"/> method.
 
-             </summary>
 
-             <remarks>
 
-             The misfire/recovery process will be started, if it is the initial call
 
-             to this method on this scheduler instance.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IScheduler.StartDelayed(System.TimeSpan)"/>
 
-             <seealso cref="M:Quartz.IScheduler.Standby"/>
 
-             <seealso cref="M:Quartz.IScheduler.Shutdown(System.Boolean)"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.StartDelayed(System.TimeSpan)">
 
-             <summary>
 
-             Calls <see cref="M:Quartz.IScheduler.Start"/> after the indicated delay.
 
-             (This call does not block). This can be useful within applications that
 
-             have initializers that create the scheduler immediately, before the
 
-             resources needed by the executing jobs have been fully initialized.
 
-             </summary>
 
-             <seealso cref="M:Quartz.IScheduler.Start"/>
 
-             <seealso cref="M:Quartz.IScheduler.Standby"/>
 
-             <seealso cref="M:Quartz.IScheduler.Shutdown(System.Boolean)"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.Standby">
 
-             <summary>
 
-             Temporarily halts the <see cref="T:Quartz.IScheduler"/>'s firing of <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             When <see cref="M:Quartz.IScheduler.Start"/> is called (to bring the scheduler out of 
 
-             stand-by mode), trigger misfire instructions will NOT be applied
 
-             during the execution of the <see cref="M:Quartz.IScheduler.Start"/> method - any misfires 
 
-             will be detected immediately afterward (by the <see cref="T:Quartz.Spi.IJobStore"/>'s 
 
-             normal process).
 
-             </para>
 
-             <para>
 
-             The scheduler is not destroyed, and can be re-started at any time.
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IScheduler.Start"/>
 
-             <seealso cref="M:Quartz.IScheduler.PauseAll"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.Shutdown">
 
-             <summary> 
 
-             Halts the <see cref="T:Quartz.IScheduler"/>'s firing of <see cref="T:Quartz.ITrigger"/>s,
 
-             and cleans up all resources associated with the Scheduler. Equivalent to Shutdown(false).
 
-             </summary>
 
-             <remarks>
 
-             The scheduler cannot be re-started.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IScheduler.Shutdown(System.Boolean)"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.Shutdown(System.Boolean)">
 
-             <summary>
 
-             Halts the <see cref="T:Quartz.IScheduler"/>'s firing of <see cref="T:Quartz.ITrigger"/>s,
 
-             and cleans up all resources associated with the Scheduler. 
 
-             </summary>
 
-             <remarks>
 
-             The scheduler cannot be re-started.
 
-             </remarks>
 
-             <param name="waitForJobsToComplete">
 
-             if <see langword="true"/> the scheduler will not allow this method
 
-             to return until all currently executing jobs have completed.
 
-             </param>
 
-             <seealso cref="M:Quartz.IScheduler.Shutdown"/> 
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.ScheduleJob(Quartz.IJobDetail,Quartz.ITrigger)">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.IJobDetail"/> to the
 
-             Scheduler, and associate the given <see cref="T:Quartz.ITrigger"/> with
 
-             it.
 
-             </summary>
 
-             <remarks>
 
-             If the given Trigger does not reference any <see cref="T:Quartz.IJob"/>, then it
 
-             will be set to reference the Job passed with it into this method.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.ScheduleJob(Quartz.ITrigger)">
 
-             <summary>
 
-             Schedule the given <see cref="T:Quartz.ITrigger"/> with the
 
-             <see cref="T:Quartz.IJob"/> identified by the <see cref="T:Quartz.ITrigger"/>'s settings.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.ScheduleJobs(System.Collections.Generic.IDictionary{Quartz.IJobDetail,Quartz.Collection.ISet{Quartz.ITrigger}},System.Boolean)">
 
-             <summary>
 
-             Schedule all of the given jobs with the related set of triggers.
 
-             </summary>
 
-             <remarks>
 
-             <para>If any of the given jobs or triggers already exist (or more
 
-             specifically, if the keys are not unique) and the replace
 
-             parameter is not set to true then an exception will be thrown.</para>
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.ScheduleJob(Quartz.IJobDetail,Quartz.Collection.ISet{Quartz.ITrigger},System.Boolean)">
 
-             <summary>
 
-             Schedule the given job with the related set of triggers.
 
-             </summary>
 
-             <remarks>
 
-             If any of the given job or triggers already exist (or more
 
-             specifically, if the keys are not unique) and the replace 
 
-             parameter is not set to true then an exception will be thrown.
 
-             </remarks>
 
-             <param name="jobDetail"></param>
 
-             <param name="triggersForJob"></param>
 
-             <param name="replace"></param>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.UnscheduleJob(Quartz.TriggerKey)">
 
-             <summary>
 
-             Remove the indicated <see cref="T:Quartz.ITrigger"/> from the scheduler.
 
-             <para>If the related job does not have any other triggers, and the job is
 
-             not durable, then the job will also be deleted.</para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.UnscheduleJobs(System.Collections.Generic.IList{Quartz.TriggerKey})">
 
-             <summary>
 
-             Remove all of the indicated <see cref="T:Quartz.ITrigger"/>s from the scheduler.
 
-             </summary>
 
-             <remarks>
 
-             <para>If the related job does not have any other triggers, and the job is
 
-             not durable, then the job will also be deleted.</para>
 
-             Note that while this bulk operation is likely more efficient than
 
-             invoking <see cref="M:Quartz.IScheduler.UnscheduleJob(Quartz.TriggerKey)"/> several
 
-             times, it may have the adverse affect of holding data locks for a
 
-             single long duration of time (rather than lots of small durations
 
-             of time).
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.RescheduleJob(Quartz.TriggerKey,Quartz.ITrigger)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.ITrigger"/> with the
 
-             given key, and store the new given one - which must be associated
 
-             with the same job (the new trigger must have the job name & group specified) 
 
-             - however, the new trigger need not have the same name as the old trigger.
 
-             </summary>
 
-             <param name="triggerKey">The <see cref="T:Quartz.ITrigger"/> to be replaced.</param>
 
-             <param name="newTrigger">
 
-             The new <see cref="T:Quartz.ITrigger"/> to be stored.
 
-             </param>
 
-             <returns> 
 
-             <see langword="null"/> if a <see cref="T:Quartz.ITrigger"/> with the given
 
-             name and group was not found and removed from the store (and the 
 
-             new trigger is therefore not stored),  otherwise
 
-             the first fire time of the newly scheduled trigger.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.AddJob(Quartz.IJobDetail,System.Boolean)">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.IJob"/> to the Scheduler - with no associated
 
-             <see cref="T:Quartz.ITrigger"/>. The <see cref="T:Quartz.IJob"/> will be 'dormant' until
 
-             it is scheduled with a <see cref="T:Quartz.ITrigger"/>, or <see cref="M:Quartz.IScheduler.TriggerJob(Quartz.JobKey)"/>
 
-             is called for it.
 
-             </summary>
 
-             <remarks>
 
-             The <see cref="T:Quartz.IJob"/> must by definition be 'durable', if it is not,
 
-             SchedulerException will be thrown.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.AddJob(Quartz.IJobDetail,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.IJob"/> to the Scheduler - with no associated
 
-             <see cref="T:Quartz.ITrigger"/>. The <see cref="T:Quartz.IJob"/> will be 'dormant' until
 
-             it is scheduled with a <see cref="T:Quartz.ITrigger"/>, or <see cref="M:Quartz.IScheduler.TriggerJob(Quartz.JobKey)"/>
 
-             is called for it.
 
-             </summary>
 
-             <remarks>
 
-             With the <paramref name="storeNonDurableWhileAwaitingScheduling"/> parameter
 
-             set to <code>true</code>, a non-durable job can be stored.  Once it is
 
-             scheduled, it will resume normal non-durable behavior (i.e. be deleted
 
-             once there are no remaining associated triggers).
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.DeleteJob(Quartz.JobKey)">
 
-             <summary>
 
-             Delete the identified <see cref="T:Quartz.IJob"/> from the Scheduler - and any
 
-             associated <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-             <returns> true if the Job was found and deleted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.DeleteJobs(System.Collections.Generic.IList{Quartz.JobKey})">
 
-             <summary>
 
-             Delete the identified jobs from the Scheduler - and any
 
-             associated <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-             <remarks>
 
-             <para>Note that while this bulk operation is likely more efficient than
 
-             invoking <see cref="M:Quartz.IScheduler.DeleteJob(Quartz.JobKey)"/> several
 
-             times, it may have the adverse affect of holding data locks for a
 
-             single long duration of time (rather than lots of small durations
 
-             of time).</para>
 
-             </remarks>
 
-             <returns>
 
-             true if all of the Jobs were found and deleted, false if
 
-             one or more were not deleted.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.TriggerJob(Quartz.JobKey)">
 
-             <summary>
 
-             Trigger the identified <see cref="T:Quartz.IJobDetail"/>
 
-             (Execute it now).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.TriggerJob(Quartz.JobKey,Quartz.JobDataMap)">
 
-             <summary>
 
-             Trigger the identified <see cref="T:Quartz.IJobDetail"/> (Execute it now).
 
-             </summary>
 
-             <param name="data">
 
-             the (possibly <see langword="null"/>) JobDataMap to be
 
-             associated with the trigger that fires the job immediately.
 
-             </param>
 
-             <param name="jobKey">
 
-             The <see cref="T:Quartz.JobKey"/> of the <see cref="T:Quartz.IJob"/> to be executed.
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.PauseJob(Quartz.JobKey)">
 
-             <summary>
 
-             Pause the <see cref="T:Quartz.IJobDetail"/> with the given
 
-             key - by pausing all of its current <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.PauseJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.IJobDetail"/>s in the
 
-             matching groups - by pausing all of their <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The Scheduler will "remember" that the groups are paused, and impose the
 
-             pause on any new jobs that are added to any of those groups until it is resumed.
 
-             </para>
 
-             <para>NOTE: There is a limitation that only exactly matched groups
 
-             can be remembered as paused.  For example, if there are pre-existing
 
-             job in groups "aaa" and "bbb" and a matcher is given to pause
 
-             groups that start with "a" then the group "aaa" will be remembered
 
-             as paused and any subsequently added jobs in group "aaa" will be paused,
 
-             however if a job is added to group "axx" it will not be paused,
 
-             as "axx" wasn't known at the time the "group starts with a" matcher 
 
-             was applied.  HOWEVER, if there are pre-existing groups "aaa" and
 
-             "bbb" and a matcher is given to pause the group "axx" (with a
 
-             group equals matcher) then no jobs will be paused, but it will be 
 
-             remembered that group "axx" is paused and later when a job is added 
 
-             in that group, it will become paused.</para>
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IScheduler.ResumeJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.PauseTrigger(Quartz.TriggerKey)">
 
-             <summary> 
 
-             Pause the <see cref="T:Quartz.ITrigger"/> with the given key.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.ITrigger"/>s in the groups matching.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The Scheduler will "remember" all the groups paused, and impose the
 
-             pause on any new triggers that are added to any of those groups until it is resumed.
 
-             </para>
 
-             <para>NOTE: There is a limitation that only exactly matched groups
 
-             can be remembered as paused.  For example, if there are pre-existing
 
-             triggers in groups "aaa" and "bbb" and a matcher is given to pause
 
-             groups that start with "a" then the group "aaa" will be remembered as
 
-             paused and any subsequently added triggers in that group be paused,
 
-             however if a trigger is added to group "axx" it will not be paused,
 
-             as "axx" wasn't known at the time the "group starts with a" matcher 
 
-             was applied.  HOWEVER, if there are pre-existing groups "aaa" and
 
-             "bbb" and a matcher is given to pause the group "axx" (with a
 
-             group equals matcher) then no triggers will be paused, but it will be 
 
-             remembered that group "axx" is paused and later when a trigger is added
 
-             in that group, it will become paused.</para>
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IScheduler.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.ResumeJob(Quartz.JobKey)">
 
-             <summary>
 
-             Resume (un-pause) the <see cref="T:Quartz.IJobDetail"/> with
 
-             the given key.
 
-             </summary>
 
-             <remarks>
 
-             If any of the <see cref="T:Quartz.IJob"/>'s<see cref="T:Quartz.ITrigger"/> s missed one
 
-             or more fire-times, then the <see cref="T:Quartz.ITrigger"/>'s misfire
 
-             instruction will be applied.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.ResumeJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Resume (un-pause) all of the <see cref="T:Quartz.IJobDetail"/>s
 
-             in matching groups.
 
-             </summary>
 
-             <remarks>
 
-             If any of the <see cref="T:Quartz.IJob"/> s had <see cref="T:Quartz.ITrigger"/> s that
 
-             missed one or more fire-times, then the <see cref="T:Quartz.ITrigger"/>'s
 
-             misfire instruction will be applied.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IScheduler.PauseJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.ResumeTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Resume (un-pause) the <see cref="T:Quartz.ITrigger"/> with the given
 
-             key.
 
-             </summary>
 
-             <remarks>
 
-             If the <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Resume (un-pause) all of the <see cref="T:Quartz.ITrigger"/>s in matching groups.
 
-             </summary>
 
-             <remarks>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IScheduler.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.PauseAll">
 
-             <summary>
 
-             Pause all triggers - similar to calling <see cref="M:Quartz.IScheduler.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             on every group, however, after using this method <see cref="M:Quartz.IScheduler.ResumeAll"/> 
 
-             must be called to clear the scheduler's state of 'remembering' that all 
 
-             new triggers will be paused as they are added. 
 
-             </summary>
 
-             <remarks>
 
-             When <see cref="M:Quartz.IScheduler.ResumeAll"/> is called (to un-pause), trigger misfire
 
-             instructions WILL be applied.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IScheduler.ResumeAll"/>
 
-             <seealso cref="M:Quartz.IScheduler.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             <seealso cref="M:Quartz.IScheduler.Standby"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.ResumeAll">
 
-             <summary> 
 
-             Resume (un-pause) all triggers - similar to calling 
 
-             <see cref="M:Quartz.IScheduler.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/> on every group.
 
-             </summary>
 
-             <remarks>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IScheduler.PauseAll"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetJobKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Get the keys of all the <see cref="T:Quartz.IJobDetail"/>s in the matching groups.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetTriggersOfJob(Quartz.JobKey)">
 
-             <summary>
 
-             Get all <see cref="T:Quartz.ITrigger"/> s that are associated with the
 
-             identified <see cref="T:Quartz.IJobDetail"/>.
 
-             </summary>
 
-             <remarks>
 
-             The returned Trigger objects will be snap-shots of the actual stored
 
-             triggers.  If you wish to modify a trigger, you must re-store the
 
-             trigger afterward (e.g. see <see cref="M:Quartz.IScheduler.RescheduleJob(Quartz.TriggerKey,Quartz.ITrigger)"/>).
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetTriggerKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Get the names of all the <see cref="T:Quartz.ITrigger"/>s in the given
 
-             groups.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetJobDetail(Quartz.JobKey)">
 
-             <summary>
 
-             Get the <see cref="T:Quartz.IJobDetail"/> for the <see cref="T:Quartz.IJob"/>
 
-             instance with the given key .
 
-             </summary>
 
-             <remarks>
 
-             The returned JobDetail object will be a snap-shot of the actual stored
 
-             JobDetail.  If you wish to modify the JobDetail, you must re-store the
 
-             JobDetail afterward (e.g. see <see cref="M:Quartz.IScheduler.AddJob(Quartz.IJobDetail,System.Boolean)"/>).
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Get the <see cref="T:Quartz.ITrigger"/> instance with the given key.
 
-             </summary>
 
-             <remarks>
 
-             The returned Trigger object will be a snap-shot of the actual stored
 
-             trigger.  If you wish to modify the trigger, you must re-store the
 
-             trigger afterward (e.g. see <see cref="M:Quartz.IScheduler.RescheduleJob(Quartz.TriggerKey,Quartz.ITrigger)"/>).
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetTriggerState(Quartz.TriggerKey)">
 
-             <summary>
 
-             Get the current state of the identified <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <seealso cref="F:Quartz.TriggerState.Normal"/>
 
-             <seealso cref="F:Quartz.TriggerState.Paused"/>
 
-             <seealso cref="F:Quartz.TriggerState.Complete"/>
 
-             <seealso cref="F:Quartz.TriggerState.Blocked"/>
 
-             <seealso cref="F:Quartz.TriggerState.Error"/>
 
-             <seealso cref="F:Quartz.TriggerState.None"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.AddCalendar(System.String,Quartz.ICalendar,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Add (register) the given <see cref="T:Quartz.ICalendar"/> to the Scheduler.
 
-             </summary>
 
-             <param name="calName">Name of the calendar.</param>
 
-             <param name="calendar">The calendar.</param>
 
-             <param name="replace">if set to <c>true</c> [replace].</param>
 
-             <param name="updateTriggers">whether or not to update existing triggers that
 
-             referenced the already existing calendar so that they are 'correct'
 
-             based on the new trigger.</param>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.DeleteCalendar(System.String)">
 
-             <summary>
 
-             Delete the identified <see cref="T:Quartz.ICalendar"/> from the Scheduler.
 
-             </summary>
 
-             <remarks>
 
-             If removal of the <code>Calendar</code> would result in
 
-             <see cref="T:Quartz.ITrigger"/>s pointing to non-existent calendars, then a
 
-             <see cref="T:Quartz.SchedulerException"/> will be thrown.
 
-             </remarks>
 
-             <param name="calName">Name of the calendar.</param>
 
-             <returns>true if the Calendar was found and deleted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetCalendar(System.String)">
 
-             <summary>
 
-             Get the <see cref="T:Quartz.ICalendar"/> instance with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetCalendarNames">
 
-             <summary>
 
-             Get the names of all registered <see cref="T:Quartz.ICalendar"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.Interrupt(Quartz.JobKey)">
 
-             <summary>
 
-             Request the interruption, within this Scheduler instance, of all 
 
-             currently executing instances of the identified <see cref="T:Quartz.IJob"/>, which 
 
-             must be an implementor of the <see cref="T:Quartz.IInterruptableJob"/> interface.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             If more than one instance of the identified job is currently executing,
 
-             the <see cref="M:Quartz.IInterruptableJob.Interrupt"/> method will be called on
 
-             each instance.  However, there is a limitation that in the case that  
 
-             <see cref="M:Quartz.IScheduler.Interrupt(Quartz.JobKey)"/> on one instances throws an exception, all 
 
-             remaining  instances (that have not yet been interrupted) will not have 
 
-             their <see cref="M:Quartz.IScheduler.Interrupt(Quartz.JobKey)"/> method called.
 
-             </para>
 
-             
 
-             <para>
 
-             If you wish to interrupt a specific instance of a job (when more than
 
-             one is executing) you can do so by calling 
 
-             <see cref="M:Quartz.IScheduler.GetCurrentlyExecutingJobs"/> to obtain a handle 
 
-             to the job instance, and then invoke <see cref="M:Quartz.IScheduler.Interrupt(Quartz.JobKey)"/> on it
 
-             yourself.
 
-             </para>
 
-             <para>
 
-             This method is not cluster aware.  That is, it will only interrupt 
 
-             instances of the identified InterruptableJob currently executing in this 
 
-             Scheduler instance, not across the entire cluster.
 
-             </para>
 
-             </remarks>
 
-             <returns> 
 
-             true is at least one instance of the identified job was found and interrupted.
 
-             </returns>
 
-             <seealso cref="T:Quartz.IInterruptableJob"/>
 
-             <seealso cref="M:Quartz.IScheduler.GetCurrentlyExecutingJobs"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.Interrupt(System.String)">
 
-             <summary>
 
-             Request the interruption, within this Scheduler instance, of the 
 
-             identified executing job instance, which 
 
-             must be an implementor of the <see cref="T:Quartz.IInterruptableJob"/> interface.
 
-             </summary>
 
-             <remarks>
 
-             This method is not cluster aware.  That is, it will only interrupt 
 
-             instances of the identified InterruptableJob currently executing in this 
 
-             Scheduler instance, not across the entire cluster.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IInterruptableJob.Interrupt"/>
 
-             <seealso cref="M:Quartz.IScheduler.GetCurrentlyExecutingJobs"/>
 
-             <seealso cref="P:Quartz.IJobExecutionContext.FireInstanceId"/>
 
-             <seealso cref="M:Quartz.IScheduler.Interrupt(Quartz.JobKey)"/>
 
-             <param nane="fireInstanceId">
 
-             the unique identifier of the job instance to  be interrupted (see <see cref="P:Quartz.IJobExecutionContext.FireInstanceId"/>
 
-             </param>
 
-             <param name="fireInstanceId"> </param>
 
-             <returns>true if the identified job instance was found and interrupted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.CheckExists(Quartz.JobKey)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.IJob"/> with the given identifier already 
 
-             exists within the scheduler.
 
-             </summary>
 
-             <param name="jobKey">the identifier to check for</param>
 
-             <returns>true if a Job exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.CheckExists(Quartz.TriggerKey)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.ITrigger"/> with the given identifier already 
 
-             exists within the scheduler.
 
-             </summary>
 
-             <param name="triggerKey">the identifier to check for</param>
 
-             <returns>true if a Trigger exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.Clear">
 
-             <summary>
 
-             Clears (deletes!) all scheduling data - all <see cref="T:Quartz.IJob"/>s, <see cref="T:Quartz.ITrigger"/>s
 
-             <see cref="T:Quartz.ICalendar"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IScheduler.SchedulerName">
 
-             <summary> 
 
-             Returns the name of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IScheduler.SchedulerInstanceId">
 
-             <summary>
 
-             Returns the instance Id of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IScheduler.Context">
 
-             <summary>
 
-             Returns the <see cref="T:Quartz.SchedulerContext"/> of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IScheduler.InStandbyMode">
 
-             <summary>
 
-             Reports whether the <see cref="T:Quartz.IScheduler"/> is in stand-by mode.
 
-             </summary>
 
-             <seealso cref="M:Quartz.IScheduler.Standby"/>
 
-             <seealso cref="M:Quartz.IScheduler.Start"/>
 
-         </member>
 
-         <member name="P:Quartz.IScheduler.IsShutdown">
 
-             <summary>
 
-             Reports whether the <see cref="T:Quartz.IScheduler"/> has been Shutdown.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IScheduler.JobFactory">
 
-             <summary>
 
-             Set the <see cref="P:Quartz.IScheduler.JobFactory"/> that will be responsible for producing 
 
-             instances of <see cref="T:Quartz.IJob"/> classes.
 
-             </summary>
 
-             <remarks>
 
-             JobFactories may be of use to those wishing to have their application
 
-             produce <see cref="T:Quartz.IJob"/> instances via some special mechanism, such as to
 
-             give the opportunity for dependency injection.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.Spi.IJobFactory"/>
 
-         </member>
 
-         <member name="P:Quartz.IScheduler.ListenerManager">
 
-             <summary>
 
-             Get a reference to the scheduler's <see cref="T:Quartz.IListenerManager"/>,
 
-             through which listeners may be registered.
 
-             </summary>
 
-             <returns>the scheduler's <see cref="T:Quartz.IListenerManager"/></returns>
 
-             <seealso cref="P:Quartz.IScheduler.ListenerManager"/>
 
-             <seealso cref="T:Quartz.IJobListener"/>
 
-             <seealso cref="T:Quartz.ITriggerListener"/>
 
-             <seealso cref="T:Quartz.ISchedulerListener"/>
 
-         </member>
 
-         <member name="P:Quartz.IScheduler.IsStarted">
 
-             <summary>
 
-             Whether the scheduler has been started.  
 
-             </summary>
 
-             <remarks>
 
-             Note: This only reflects whether <see cref="M:Quartz.IScheduler.Start"/> has ever
 
-             been called on this Scheduler, so it will return <see langword="true"/> even 
 
-             if the <see cref="T:Quartz.IScheduler"/> is currently in standby mode or has been 
 
-             since shutdown.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IScheduler.Start"/>
 
-             <seealso cref="P:Quartz.IScheduler.IsShutdown"/>
 
-             <seealso cref="P:Quartz.IScheduler.InStandbyMode"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.#ctor(System.String,Quartz.Spi.IRemotableSchedulerProxyFactory)">
 
-             <summary>
 
-             Construct a <see cref="T:Quartz.Impl.RemoteScheduler"/> instance to proxy the given
 
-             RemoteableQuartzScheduler instance.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.IsJobGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given JobGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.IsTriggerGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given TriggerGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetMetaData">
 
-             <summary>
 
-             Get a <see cref="T:Quartz.SchedulerMetaData"/> object describiing the settings
 
-             and capabilities of the scheduler instance.
 
-             <para>
 
-             Note that the data returned is an 'instantaneous' snap-shot, and that as
 
-             soon as it's returned, the meta data values may be different.
 
-             </para>
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetCurrentlyExecutingJobs">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetJobGroupNames">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetTriggerGroupNames">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetPausedTriggerGroups">
 
-             <summary>
 
-             Get the names of all <see cref="T:Quartz.ITrigger"/> groups that are paused.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.Start">
 
-             <summary> 
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.StartDelayed(System.TimeSpan)">
 
-             <summary> 
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.Standby">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.Shutdown">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.Shutdown(System.Boolean)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.ScheduleJob(Quartz.IJobDetail,Quartz.ITrigger)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.ScheduleJob(Quartz.ITrigger)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.AddJob(Quartz.IJobDetail,System.Boolean)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.AddJob(Quartz.IJobDetail,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.DeleteJob(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.UnscheduleJob(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.RescheduleJob(Quartz.TriggerKey,Quartz.ITrigger)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.TriggerJob(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.TriggerJob(Quartz.JobKey,Quartz.JobDataMap)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.PauseTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.PauseJob(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.PauseJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.ResumeTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.ResumeJob(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.ResumeJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.PauseAll">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.ResumeAll">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetJobKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetTriggersOfJob(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetTriggerKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetJobDetail(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.CheckExists(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.CheckExists(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.Clear">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetTriggerState(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.AddCalendar(System.String,Quartz.ICalendar,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.DeleteCalendar(System.String)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetCalendar(System.String)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetCalendarNames">
 
-             <summary>
 
-             Get the names of all registered <see cref="T:Quartz.ICalendar"/>.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.Interrupt(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.RemoteScheduler.SchedulerName">
 
-             <summary>
 
-             Returns the name of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.RemoteScheduler.SchedulerInstanceId">
 
-             <summary>
 
-             Returns the instance Id of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.RemoteScheduler.Context">
 
-             <summary> 
 
-             Returns the <see cref="T:Quartz.SchedulerContext"/> of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.RemoteScheduler.InStandbyMode">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.RemoteScheduler.IsShutdown">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.RemoteScheduler.JobFactory">
 
-             <summary>
 
-             Set the <see cref="P:Quartz.Impl.RemoteScheduler.JobFactory"/> that will be responsible for producing
 
-             instances of <see cref="T:Quartz.IJob"/> classes.
 
-             <para>
 
-             JobFactories may be of use to those wishing to have their application
 
-             produce <see cref="T:Quartz.IJob"/> instances via some special mechanism, such as to
 
-             give the opertunity for dependency injection.
 
-             </para>
 
-             </summary>
 
-             <value></value>
 
-             <seealso cref="T:Quartz.Spi.IJobFactory"/>
 
-             <throws>  SchedulerException </throws>
 
-         </member>
 
-         <member name="P:Quartz.Impl.RemoteScheduler.IsStarted">
 
-             <summary>
 
-             Whether the scheduler has been started.
 
-             </summary>
 
-             <value></value>
 
-             <remarks>
 
-             Note: This only reflects whether <see cref="M:Quartz.Impl.RemoteScheduler.Start"/> has ever
 
-             been called on this Scheduler, so it will return <see langword="true"/> even
 
-             if the <see cref="T:Quartz.IScheduler"/> is currently in standby mode or has been
 
-             since shutdown.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.Impl.RemoteScheduler.Start"/>
 
-             <seealso cref="P:Quartz.Impl.RemoteScheduler.IsShutdown"/>
 
-             <seealso cref="P:Quartz.Impl.RemoteScheduler.InStandbyMode"/>
 
-         </member>
 
-         <member name="T:Quartz.Impl.SchedulerDetailsSetter">
 
-             <summary>
 
-             This utility calls methods reflectively on the given objects even though the
 
-             methods are likely on a proper interface (ThreadPool, JobStore, etc). The
 
-             motivation is to be tolerant of older implementations that have not been
 
-             updated for the changes in the interfaces (eg. LocalTaskExecutorThreadPool in
 
-             spring quartz helpers)
 
-             </summary>
 
-             <author>teck</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Impl.SchedulerRepository">
 
-             <summary>
 
-             Holds references to Scheduler instances - ensuring uniqueness, and
 
-             preventing garbage collection, and allowing 'global' lookups.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.SchedulerRepository.Bind(Quartz.IScheduler)">
 
-             <summary>
 
-             Binds the specified sched.
 
-             </summary>
 
-             <param name="sched">The sched.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.SchedulerRepository.Remove(System.String)">
 
-             <summary>
 
-             Removes the specified sched name.
 
-             </summary>
 
-             <param name="schedName">Name of the sched.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.SchedulerRepository.Lookup(System.String)">
 
-             <summary>
 
-             Lookups the specified sched name.
 
-             </summary>
 
-             <param name="schedName">Name of the sched.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.SchedulerRepository.LookupAll">
 
-             <summary>
 
-             Lookups all.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.SchedulerRepository.Instance">
 
-             <summary>
 
-             Gets the singleton instance.
 
-             </summary>
 
-             <value>The instance.</value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.StdJobRunShellFactory">
 
-             <summary> 
 
-             Responsible for creating the instances of <see cref="T:Quartz.Core.JobRunShell"/>
 
-             to be used within the <see cref="T:Quartz.Core.QuartzScheduler"/> instance.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdJobRunShellFactory.Initialize(Quartz.IScheduler)">
 
-             <summary>
 
-             Initialize the factory, providing a handle to the <see cref="T:Quartz.IScheduler"/>
 
-             that should be made available within the <see cref="T:Quartz.Core.JobRunShell"/> and
 
-             the <see cref="T:Quartz.IJobExecutionContext"/> s within it.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdJobRunShellFactory.CreateJobRunShell(Quartz.Spi.TriggerFiredBundle)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.Core.QuartzSchedulerThread"/> to obtain instances of 
 
-             <see cref="T:Quartz.Core.JobRunShell"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.StdScheduler">
 
-             <summary>
 
-             An implementation of the <see cref="T:Quartz.IScheduler"/> interface that directly
 
-             proxies all method calls to the equivalent call on a given <see cref="T:Quartz.Core.QuartzScheduler"/>
 
-             instance.
 
-             </summary>
 
-             <seealso cref="T:Quartz.IScheduler"/>
 
-             <seealso cref="T:Quartz.Core.QuartzScheduler"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.#ctor(Quartz.Core.QuartzScheduler)">
 
-             <summary>
 
-             Construct a <see cref="T:Quartz.Impl.StdScheduler"/> instance to proxy the given
 
-             <see cref="T:Quartz.Core.QuartzScheduler"/> instance.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.IsJobGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given JobGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.IsTriggerGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given TriggerGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetMetaData">
 
-             <summary>
 
-             Get a <see cref="T:Quartz.SchedulerMetaData"/> object describiing the settings
 
-             and capabilities of the scheduler instance.
 
-             <para>
 
-             Note that the data returned is an 'instantaneous' snap-shot, and that as
 
-             soon as it's returned, the meta data values may be different.
 
-             </para>
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetCurrentlyExecutingJobs">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.Clear">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetPausedTriggerGroups">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetJobGroupNames">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetTriggerGroupNames">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.Start">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.StartDelayed(System.TimeSpan)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.Standby">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.Shutdown">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.Shutdown(System.Boolean)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.ScheduleJob(Quartz.IJobDetail,Quartz.ITrigger)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.ScheduleJob(Quartz.ITrigger)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.AddJob(Quartz.IJobDetail,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.AddJob(Quartz.IJobDetail,System.Boolean)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.DeleteJob(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.UnscheduleJob(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.RescheduleJob(Quartz.TriggerKey,Quartz.ITrigger)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.TriggerJob(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.TriggerJob(Quartz.JobKey,Quartz.JobDataMap)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.CheckExists(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.CheckExists(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.PauseTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.PauseJob(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.PauseJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.ResumeTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.ResumeJob(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.ResumeJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.PauseAll">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.ResumeAll">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetTriggersOfJob(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetJobKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetTriggerKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetJobDetail(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetTriggerState(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.AddCalendar(System.String,Quartz.ICalendar,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.DeleteCalendar(System.String)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetCalendar(System.String)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetCalendarNames">
 
-             <summary>
 
-             Get the names of all registered <see cref="T:Quartz.ICalendar"/>.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.Interrupt(Quartz.JobKey)">
 
-             <summary>
 
-             Request the interruption, within this Scheduler instance, of all
 
-             currently executing instances of the identified <see cref="T:Quartz.IJob"/>, which
 
-             must be an implementor of the <see cref="T:Quartz.IInterruptableJob"/> interface.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             If more than one instance of the identified job is currently executing,
 
-             the <see cref="M:Quartz.IInterruptableJob.Interrupt"/> method will be called on
 
-             each instance.  However, there is a limitation that in the case that
 
-             <see cref="M:Quartz.Impl.StdScheduler.Interrupt(Quartz.JobKey)"/> on one instances throws an exception, all
 
-             remaining  instances (that have not yet been interrupted) will not have
 
-             their <see cref="M:Quartz.Impl.StdScheduler.Interrupt(Quartz.JobKey)"/> method called.
 
-             </para>
 
-             <para>
 
-             If you wish to interrupt a specific instance of a job (when more than
 
-             one is executing) you can do so by calling
 
-             <see cref="M:Quartz.Impl.StdScheduler.GetCurrentlyExecutingJobs"/> to obtain a handle
 
-             to the job instance, and then invoke <see cref="M:Quartz.Impl.StdScheduler.Interrupt(Quartz.JobKey)"/> on it
 
-             yourself.
 
-             </para>
 
-             <para>
 
-             This method is not cluster aware.  That is, it will only interrupt
 
-             instances of the identified InterruptableJob currently executing in this
 
-             Scheduler instance, not across the entire cluster.
 
-             </para>
 
-             </remarks>
 
-             <returns>true is at least one instance of the identified job was found and interrupted.</returns>
 
-             <throws>  UnableToInterruptJobException if the job does not implement </throws>
 
-             <seealso cref="T:Quartz.IInterruptableJob"/>
 
-             <seealso cref="M:Quartz.Impl.StdScheduler.GetCurrentlyExecutingJobs"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.StdScheduler.SchedulerName">
 
-             <summary>
 
-             Returns the name of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.StdScheduler.SchedulerInstanceId">
 
-             <summary>
 
-             Returns the instance Id of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.StdScheduler.Context">
 
-             <summary>
 
-             Returns the <see cref="T:Quartz.SchedulerContext"/> of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.StdScheduler.IsStarted">
 
-             <summary>
 
-             Whether the scheduler has been started.
 
-             </summary>
 
-             <value></value>
 
-             <remarks>
 
-             Note: This only reflects whether <see cref="M:Quartz.Impl.StdScheduler.Start"/> has ever
 
-             been called on this Scheduler, so it will return <see langword="true"/> even
 
-             if the <see cref="T:Quartz.IScheduler"/> is currently in standby mode or has been
 
-             since shutdown.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.Impl.StdScheduler.Start"/>
 
-             <seealso cref="P:Quartz.Impl.StdScheduler.IsShutdown"/>
 
-             <seealso cref="P:Quartz.Impl.StdScheduler.InStandbyMode"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.StdScheduler.InStandbyMode">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.StdScheduler.IsShutdown">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.StdScheduler.ListenerManager">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.StdScheduler.JobFactory">
 
-             <seealso cref="P:Quartz.IScheduler.JobFactory">
 
-             </seealso>
 
-         </member>
 
-         <member name="T:Quartz.Impl.StdSchedulerFactory">
 
-             <summary>
 
-             An implementation of <see cref="T:Quartz.ISchedulerFactory"/> that
 
-             does all of it's work of creating a <see cref="T:Quartz.Core.QuartzScheduler"/> instance
 
-             based on the contents of a properties file.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             By default a properties are loaded from App.config's quartz section. 
 
-             If that fails, then the file is loaded "quartz.properties". If file does not exist,
 
-             default configration located (as a embedded resource) in Quartz.dll is loaded. If you
 
-             wish to use a file other than these defaults, you must define the system
 
-             property 'quartz.properties' to point to the file you want.
 
-             </para>
 
-             <para>
 
-             See the sample properties that are distributed with Quartz for
 
-             information about the various settings available within the file.
 
-             </para>
 
-             <para>
 
-             Alternativly, you can explicitly Initialize the factory by calling one of
 
-             the <see cref="M:Quartz.Impl.StdSchedulerFactory.Initialize"/> methods before calling <see cref="M:Quartz.Impl.StdSchedulerFactory.GetScheduler"/>.
 
-             </para>
 
-             <para>
 
-             Instances of the specified <see cref="T:Quartz.Spi.IJobStore"/>,
 
-             <see cref="T:Quartz.Spi.IThreadPool"/>, classes will be created
 
-             by name, and then any additional properties specified for them in the config
 
-             file will be set on the instance by calling an equivalent 'set' method. For
 
-             example if the properties file contains the property 'quartz.jobStore.
 
-             myProp = 10' then after the JobStore class has been instantiated, the property
 
-             'MyProp' will be set with the value. Type conversion to primitive CLR types
 
-             (int, long, float, double, boolean, enum and string) are performed before calling
 
-             the property's setter method.
 
-             </para>
 
-             </remarks>
 
-             <author>James House</author>
 
-             <author>Anthony Eden</author>
 
-             <author>Mohammad Rezaei</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdSchedulerFactory.GetDefaultScheduler">
 
-             <summary>
 
-             Returns a handle to the default Scheduler, creating it if it does not
 
-             yet exist.
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.StdSchedulerFactory.Initialize">
 
-             </seealso>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdSchedulerFactory.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.StdSchedulerFactory"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdSchedulerFactory.#ctor(System.Collections.Specialized.NameValueCollection)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.StdSchedulerFactory"/> class.
 
-             </summary>
 
-             <param name="props">The props.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdSchedulerFactory.Initialize">
 
-             <summary>
 
-             Initialize the <see cref="T:Quartz.ISchedulerFactory"/>.
 
-             </summary>
 
-             <remarks>
 
-             By default a properties file named "quartz.properties" is loaded from
 
-             the 'current working directory'. If that fails, then the
 
-             "quartz.properties" file located (as an embedded resource) in the Quartz.NET
 
-             assembly is loaded. If you wish to use a file other than these defaults,
 
-             you must define the system property 'quartz.properties' to point to
 
-             the file you want.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdSchedulerFactory.OverrideWithSysProps(System.Collections.Specialized.NameValueCollection)">
 
-             <summary>
 
-             Creates a new name value collection and overrides its values
 
-             with system values (environment variables).
 
-             </summary>
 
-             <param name="props">The base properties to override.</param>
 
-             <returns>A new NameValueCollection instance.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdSchedulerFactory.Initialize(System.Collections.Specialized.NameValueCollection)">
 
-             <summary> 
 
-             Initialize the <see cref="T:Quartz.ISchedulerFactory"/> with
 
-             the contents of the given key value collection object.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdSchedulerFactory.Instantiate">
 
-             <summary>  </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdSchedulerFactory.LoadType(System.String)">
 
-             <summary>
 
-             Needed while loadhelper is not constructed.
 
-             </summary>
 
-             <param name="typeName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdSchedulerFactory.GetScheduler">
 
-             <summary>
 
-             Returns a handle to the Scheduler produced by this factory.
 
-             </summary>
 
-             <remarks>
 
-             If one of the <see cref="M:Quartz.Impl.StdSchedulerFactory.Initialize"/> methods has not be previously
 
-             called, then the default (no-arg) <see cref="M:Quartz.Impl.StdSchedulerFactory.Initialize"/> method
 
-             will be called by this method.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdSchedulerFactory.GetScheduler(System.String)">
 
-             <summary> <para>
 
-             Returns a handle to the Scheduler with the given name, if it exists (if
 
-             it has already been instantiated).
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.StdSchedulerFactory.AllSchedulers">
 
-             <summary> <para>
 
-             Returns a handle to all known Schedulers (made by any
 
-             StdSchedulerFactory instance.).
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Job.DirectoryScanJob">
 
-             <summary>
 
-              Inspects a directory and compares whether any files' "last modified dates" 
 
-              have changed since the last time it was inspected.  If one or more files 
 
-              have been updated (or created), the job invokes a "call-back" method on an 
 
-              identified <see cref="T:Quartz.Job.IDirectoryScanListener"/> that can be found in the
 
-              <see cref="T:Quartz.SchedulerContext"/>.
 
-              </summary>
 
-              <author>pl47ypus</author>
 
-              <author>James House</author>
 
-              <author>Marko Lahma (.NET)</author>
 
-              
 
-         </member>
 
-         <member name="T:Quartz.IJob">
 
-             <summary> 
 
-             The interface to be implemented by classes which represent a 'job' to be
 
-             performed.
 
-             </summary>
 
-             <remarks>
 
-             Instances of this interface must have a <see langword="public"/>
 
-             no-argument constructor. <see cref="T:Quartz.JobDataMap"/> provides a mechanism for 'instance member data'
 
-             that may be required by some implementations of this interface.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IJobDetail"/>
 
-             <seealso cref="T:Quartz.JobBuilder"/>
 
-             <seealso cref="T:Quartz.DisallowConcurrentExecutionAttribute"/>
 
-             <seealso cref="T:Quartz.PersistJobDataAfterExecutionAttribute"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <seealso cref="T:Quartz.IScheduler"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             fires that is associated with the <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-             <remarks>
 
-             The implementation may wish to set a  result object on the 
 
-             JobExecutionContext before this method exits.  The result itself
 
-             is meaningless to Quartz, but may be informative to 
 
-             <see cref="T:Quartz.IJobListener"/>s or 
 
-             <see cref="T:Quartz.ITriggerListener"/>s that are watching the job's 
 
-             execution.
 
-             </remarks>
 
-             <param name="context">The execution context.</param>
 
-         </member>
 
-         <member name="F:Quartz.Job.DirectoryScanJob.DirectoryName">
 
-             <see cref="T:Quartz.JobDataMap"/> key with which to specify the directory to be 
 
-              monitored - an absolute path is recommended. 
 
-         </member>
 
-         <member name="F:Quartz.Job.DirectoryScanJob.DirectoryScanListenerName">
 
-             <see cref="T:Quartz.JobDataMap"/> key with which to specify the 
 
-             <see cref="T:Quartz.Job.IDirectoryScanListener"/> to be 
 
-             notified when the directory contents change.  
 
-         </member>
 
-         <member name="F:Quartz.Job.DirectoryScanJob.MinimumUpdateAge">
 
-             <see cref="T:Quartz.JobDataMap"/> key with which to specify a <see cref="T:System.Int64"/>
 
-             value that represents the minimum number of milliseconds that must have
 
-             passed since the file's last modified time in order to consider the file
 
-             new/altered.  This is necessary because another process may still be
 
-             in the middle of writing to the file when the scan occurs, and the
 
-              file may therefore not yet be ready for processing.
 
-             <para>If this parameter is not specified, a default value of 5000 (five seconds) will be used.</para>
 
-         </member>
 
-         <member name="M:Quartz.Job.DirectoryScanJob.Execute(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             This is the main entry point for job execution. The scheduler will call this method on the 
 
-             job once it is triggered.
 
-             </summary>
 
-             <param name="context">The <see cref="T:Quartz.IJobExecutionContext"/> that 
 
-             the job will use during execution.</param>
 
-         </member>
 
-         <member name="T:Quartz.Job.FileScanJob">
 
-             <summary> 
 
-             Inspects a file and compares whether it's "last modified date" has changed
 
-             since the last time it was inspected.  If the file has been updated, the
 
-             job invokes a "call-back" method on an identified 
 
-             <see cref="T:Quartz.Job.IFileScanListener"/> that can be found in the 
 
-             <see cref="T:Quartz.SchedulerContext"/>.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-             <seealso cref="T:Quartz.Job.IFileScanListener"/>
 
-         </member>
 
-         <member name="F:Quartz.Job.FileScanJob.FileName">
 
-             <summary>
 
-             JobDataMap key with which to specify the name of the file to monitor.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.FileScanJob.FileScanListenerName">
 
-             <summary>
 
-             JobDataMap key with which to specify the <see cref="T:Quartz.Job.IFileScanListener"/>
 
-             to be notified when the file contents change. 
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.FileScanJob.MinimumUpdateAge">
 
-             <summary>
 
-             <see cref="T:Quartz.JobDataMap"/> key with which to specify a long
 
-             value that represents the minimum number of milliseconds that must have
 
-             past since the file's last modified time in order to consider the file
 
-             new/altered.  This is necessary because another process may still be
 
-             in the middle of writing to the file when the scan occurs, and the
 
-             file may therefore not yet be ready for processing.
 
-             
 
-             <para>If this parameter is not specified, a default value of 
 
-             5000 (five seconds) will be used.</para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Job.FileScanJob.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Job.FileScanJob"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Job.FileScanJob.Execute(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             fires that is associated with the <see cref="T:Quartz.IJob"/>.
 
-             <para>
 
-             The implementation may wish to set a  result object on the
 
-             JobExecutionContext before this method exits.  The result itself
 
-             is meaningless to Quartz, but may be informative to
 
-             <see cref="T:Quartz.IJobListener"/>s or
 
-             <see cref="T:Quartz.ITriggerListener"/>s that are watching the job's
 
-             execution.
 
-             </para>
 
-             </summary>
 
-             <param name="context">The execution context.</param>
 
-             <seealso cref="T:Quartz.IJob">
 
-             </seealso>
 
-         </member>
 
-         <member name="M:Quartz.Job.FileScanJob.GetLastModifiedDate(System.String)">
 
-             <summary>
 
-             Gets the last modified date.
 
-             </summary>
 
-             <param name="fileName">Name of the file.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Job.FileScanJob.Log">
 
-             <summary>
 
-             Gets the log.
 
-             </summary>
 
-             <value>The log.</value>
 
-         </member>
 
-         <member name="T:Quartz.Job.IDirectoryScanListener">
 
-             <summary>Interface for objects wishing to receive a 'call-back' from a <see cref="T:Quartz.Job.DirectoryScanJob"/></summary>
 
-             <remarks><para>Instances should be stored in the <see cref="T:Quartz.SchedulerContext"/> such that the
 
-             <see cref="T:Quartz.Job.DirectoryScanJob"/> can find it.</para></remarks>
 
-             <author>James House</author>
 
-              <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Job.IDirectoryScanListener.FilesUpdatedOrAdded(System.Collections.Generic.IEnumerable{System.IO.FileInfo})">
 
-             <param name="updatedFiles">An array of <see cref="T:System.IO.FileInfo"/> objects that were updated/added 
 
-             since the last scan of the directory</param>
 
-         </member>
 
-         <member name="T:Quartz.Job.IFileScanListener">
 
-             <summary> 
 
-             Interface for objects wishing to receive a 'call-back' from a 
 
-             <see cref="T:Quartz.Job.FileScanJob"/>.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-             <seealso cref="T:Quartz.Job.FileScanJob"/>
 
-         </member>
 
-         <member name="M:Quartz.Job.IFileScanListener.FileUpdated(System.String)">
 
-             <summary>
 
-             Ïnforms that certain file has been updated.
 
-             </summary>
 
-             <param name="fileName">Name of the file.</param>
 
-         </member>
 
-         <member name="T:Quartz.Job.NativeJob">
 
-             <summary>
 
-             Built in job for executing native executables in a separate process.
 
-             </summary>
 
-             <remarks>
 
-             <example>
 
-                 JobDetail job = new JobDetail("dumbJob", null, typeof(Quartz.Jobs.NativeJob));
 
-                 job.JobDataMap.Put(Quartz.Jobs.NativeJob.PropertyCommand, "echo \"hi\" >> foobar.txt");
 
-                 Trigger trigger = TriggerUtils.MakeSecondlyTrigger(5);
 
-                 trigger.Name = "dumbTrigger";
 
-                 sched.ScheduleJob(job, trigger);
 
-             </example>
 
-             If PropertyWaitForProcess is true, then the integer exit value of the process
 
-             will be saved as the job execution result in the JobExecutionContext.
 
-             </remarks>
 
-             <author>Matthew Payne</author>
 
-             <author>James House</author>
 
-             <author>Steinar Overbeck Cook</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.Job.NativeJob.PropertyCommand">
 
-             <summary> 
 
-             Required parameter that specifies the name of the command (executable) 
 
-             to be ran.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.NativeJob.PropertyParameters">
 
-             <summary> 
 
-             Optional parameter that specifies the parameters to be passed to the
 
-             executed command.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.NativeJob.PropertyWaitForProcess">
 
-             <summary> 
 
-             Optional parameter (value should be 'true' or 'false') that specifies 
 
-             whether the job should wait for the execution of the native process to 
 
-             complete before it completes.
 
-             
 
-             <para>Defaults to <see langword="true" />.</para>  
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.NativeJob.PropertyConsumeStreams">
 
-             <summary> 
 
-             Optional parameter (value should be 'true' or 'false') that specifies 
 
-             whether the spawned process's stdout and stderr streams should be 
 
-             consumed.  If the process creates output, it is possible that it might
 
-             'hang' if the streams are not consumed.
 
-             
 
-             <para>Defaults to <see langword="false" />.</para>  
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.NativeJob.PropertyWorkingDirectory">
 
-             <summary> 
 
-             Optional parameter that specifies the workling directory to be used by 
 
-             the executed command.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Job.NativeJob.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Job.NativeJob"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Job.NativeJob.Execute(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             fires that is associated with the <see cref="T:Quartz.IJob"/>.
 
-             <para>
 
-             The implementation may wish to set a  result object on the
 
-             JobExecutionContext before this method exits.  The result itself
 
-             is meaningless to Quartz, but may be informative to
 
-             <see cref="T:Quartz.IJobListener"/>s or
 
-             <see cref="T:Quartz.ITriggerListener"/>s that are watching the job's
 
-             execution.
 
-             </para>
 
-             </summary>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="P:Quartz.Job.NativeJob.Log">
 
-             <summary>
 
-             Gets the log.
 
-             </summary>
 
-             <value>The log.</value>
 
-         </member>
 
-         <member name="T:Quartz.Job.NativeJob.StreamConsumer">
 
-             <summary> 
 
-             Consumes data from the given input stream until EOF and prints the data to stdout
 
-             </summary>
 
-             <author>cooste</author>
 
-             <author>James House</author>
 
-         </member>
 
-         <member name="M:Quartz.Job.NativeJob.StreamConsumer.#ctor(Quartz.Job.NativeJob,System.IO.Stream,System.String)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Job.NativeJob.StreamConsumer"/> class.
 
-             </summary>
 
-             <param name="enclosingInstance">The enclosing instance.</param>
 
-             <param name="inputStream">The input stream.</param>
 
-             <param name="type">The type.</param>
 
-         </member>
 
-         <member name="M:Quartz.Job.NativeJob.StreamConsumer.Run">
 
-             <summary> 
 
-             Runs this object as a separate thread, printing the contents of the input stream
 
-             supplied during instantiation, to either Console. or stderr
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Job.NoOpJob">
 
-             <summary>
 
-             An implementation of Job, that does absolutely nothing - useful for system
 
-             which only wish to use <see cref="T:Quartz.ITriggerListener"/>s
 
-             and <see cref="T:Quartz.IJobListener"/>s, rather than writing
 
-             Jobs that perform work.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Job.NoOpJob.Execute(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Do nothing.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Job.SendMailJob">
 
-             <summary>
 
-             A Job which sends an e-mail with the configured content to the configured
 
-             recipient.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertySmtpHost">
 
-             <summary> The host name of the smtp server. REQUIRED.</summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertySmtpPort">
 
-             <summary> The port of the smtp server. Optional.</summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertyUsername">
 
-             <summary> Username for authenticated session. Password must also be set if username is used. Optional.</summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertyPassword">
 
-             <summary> Password for authenticated session. Optional.</summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertyRecipient">
 
-             <summary> The e-mail address to send the mail to. REQUIRED.</summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertyCcRecipient">
 
-             <summary> The e-mail address to cc the mail to. Optional.</summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertySender">
 
-             <summary> The e-mail address to claim the mail is from. REQUIRED.</summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertyReplyTo">
 
-             <summary> The e-mail address the message should say to reply to. Optional.</summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertySubject">
 
-             <summary> The subject to place on the e-mail. REQUIRED.</summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertyMessage">
 
-             <summary> The e-mail message body. REQUIRED.</summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertyEncoding">
 
-             <summary> The message subject and body content type. Optional.</summary>
 
-         </member>
 
-         <member name="M:Quartz.Job.SendMailJob.Execute(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Executes the job.
 
-             </summary>
 
-             <param name="context">The job execution context.</param>
 
-         </member>
 
-         <member name="T:Quartz.Listener.BroadcastJobListener">
 
-             <summary>
 
-             Holds a List of references to JobListener instances and broadcasts all
 
-             events to them (in order).
 
-             </summary>
 
-             <remarks>
 
-             <para>The broadcasting behavior of this listener to delegate listeners may be
 
-             more convenient than registering all of the listeners directly with the
 
-             Scheduler, and provides the flexibility of easily changing which listeners
 
-             get notified.</para>
 
-             </remarks>
 
-             <seealso cref="M:Quartz.Listener.BroadcastJobListener.AddListener(Quartz.IJobListener)"/>
 
-             <seealso cref="M:Quartz.Listener.BroadcastJobListener.RemoveListener(Quartz.IJobListener)"/>
 
-             <seealso cref="M:Quartz.Listener.BroadcastJobListener.RemoveListener(System.String)"/>
 
-             <author>James House (jhouse AT revolition DOT net)</author>
 
-         </member>
 
-         <member name="M:Quartz.Listener.BroadcastJobListener.#ctor(System.String)">
 
-             <summary>
 
-             Construct an instance with the given name.
 
-             </summary>
 
-             <remarks>
 
-             (Remember to add some delegate listeners!)
 
-             </remarks>
 
-             <param name="name">the name of this instance</param>
 
-         </member>
 
-         <member name="M:Quartz.Listener.BroadcastJobListener.#ctor(System.String,System.Collections.Generic.List{Quartz.IJobListener})">
 
-             <summary>
 
-             Construct an instance with the given name, and List of listeners.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="name">the name of this instance</param>
 
-             <param name="listeners">the initial List of JobListeners to broadcast to.</param>
 
-         </member>
 
-         <member name="T:Quartz.Listener.BroadcastSchedulerListener">
 
-              <summary>
 
-              Holds a List of references to SchedulerListener instances and broadcasts all
 
-               events to them (in order).
 
-             </summary>
 
-              <remarks>
 
-              This may be more convenient than registering all of the listeners
 
-              directly with the Scheduler, and provides the flexibility of easily changing
 
-              which listeners get notified.
 
-              </remarks>
 
-              <see cref="M:Quartz.Listener.BroadcastSchedulerListener.AddListener(Quartz.ISchedulerListener)"/>
 
-              <see cref="M:Quartz.Listener.BroadcastSchedulerListener.RemoveListener(Quartz.ISchedulerListener)"/>
 
-              <author>James House</author>
 
-              <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Listener.BroadcastSchedulerListener.#ctor(System.Collections.Generic.IEnumerable{Quartz.ISchedulerListener})">
 
-             <summary>
 
-             Construct an instance with the given List of listeners.
 
-             </summary>
 
-             <param name="listeners">The initial List of SchedulerListeners to broadcast to.</param>
 
-         </member>
 
-         <member name="T:Quartz.Listener.BroadcastTriggerListener">
 
-             <summary>
 
-             Holds a List of references to TriggerListener instances and broadcasts all
 
-             events to them (in order).
 
-             </summary>
 
-             <remarks>
 
-             <para>The broadcasting behavior of this listener to delegate listeners may be
 
-             more convenient than registering all of the listeners directly with the
 
-             Scheduler, and provides the flexibility of easily changing which listeners
 
-             get notified.</para>
 
-             </remarks>
 
-             <seealso cref="M:Quartz.Listener.BroadcastTriggerListener.AddListener(Quartz.ITriggerListener)"/>
 
-             <seealso cref="M:Quartz.Listener.BroadcastTriggerListener.RemoveListener(Quartz.ITriggerListener)"/>
 
-             <seealso cref="M:Quartz.Listener.BroadcastTriggerListener.RemoveListener(System.String)"/>
 
-             <author>James House (jhouse AT revolition DOT net)</author>
 
-         </member>
 
-         <member name="T:Quartz.ITriggerListener">
 
-             <summary>
 
-             The interface to be implemented by classes that want to be informed when a
 
-             <see cref="T:Quartz.ITrigger"/> fires. In general, applications that use a
 
-             <see cref="T:Quartz.IScheduler"/> will not have use for this mechanism.
 
-             </summary>
 
-             <seealso cref="T:Quartz.IListenerManager"/>
 
-             <seealso cref="T:Quartz.IMatcher`1"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <seealso cref="T:Quartz.IJobListener"/>
 
-             <seealso cref="T:Quartz.IJobExecutionContext"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.ITriggerListener.TriggerFired(Quartz.ITrigger,Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             has fired, and it's associated <see cref="T:Quartz.IJobDetail"/>
 
-             is about to be executed.
 
-             <para>
 
-             It is called before the <see cref="M:Quartz.ITriggerListener.VetoJobExecution(Quartz.ITrigger,Quartz.IJobExecutionContext)"/> method of this
 
-             interface.
 
-             </para>
 
-             </summary>
 
-             <param name="trigger">The <see cref="T:Quartz.ITrigger"/> that has fired.</param>
 
-             <param name="context">
 
-                 The <see cref="T:Quartz.IJobExecutionContext"/> that will be passed to the <see cref="T:Quartz.IJob"/>'s<see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> method.
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.ITriggerListener.VetoJobExecution(Quartz.ITrigger,Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             has fired, and it's associated <see cref="T:Quartz.IJobDetail"/>
 
-             is about to be executed.
 
-             <para>
 
-             It is called after the <see cref="M:Quartz.ITriggerListener.TriggerFired(Quartz.ITrigger,Quartz.IJobExecutionContext)"/> method of this
 
-             interface.  If the implementation vetos the execution (via
 
-             returning <see langword="true"/>), the job's execute method will not be called.
 
-             </para>
 
-             </summary>
 
-             <param name="trigger">The <see cref="T:Quartz.ITrigger"/> that has fired.</param>
 
-             <param name="context">The <see cref="T:Quartz.IJobExecutionContext"/> that will be passed to
 
-             the <see cref="T:Quartz.IJob"/>'s<see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> method.</param>
 
-             <returns>Returns true if job execution should be vetoed, false otherwise.</returns>
 
-         </member>
 
-         <member name="M:Quartz.ITriggerListener.TriggerMisfired(Quartz.ITrigger)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             has misfired.
 
-             <para>
 
-             Consideration should be given to how much time is spent in this method,
 
-             as it will affect all triggers that are misfiring.  If you have lots
 
-             of triggers misfiring at once, it could be an issue it this method
 
-             does a lot.
 
-             </para>
 
-             </summary>
 
-             <param name="trigger">The <see cref="T:Quartz.ITrigger"/> that has misfired.</param>
 
-         </member>
 
-         <member name="M:Quartz.ITriggerListener.TriggerComplete(Quartz.ITrigger,Quartz.IJobExecutionContext,Quartz.SchedulerInstruction)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             has fired, it's associated <see cref="T:Quartz.IJobDetail"/>
 
-             has been executed, and it's <see cref="M:Quartz.Spi.IOperableTrigger.Triggered(Quartz.ICalendar)"/> method has been
 
-             called.
 
-             </summary>
 
-             <param name="trigger">The <see cref="T:Quartz.ITrigger"/> that was fired.</param>
 
-             <param name="context">
 
-             The <see cref="T:Quartz.IJobExecutionContext"/> that was passed to the
 
-             <see cref="T:Quartz.IJob"/>'s<see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> method.
 
-             </param>
 
-             <param name="triggerInstructionCode">
 
-             The result of the call on the <see cref="T:Quartz.ITrigger"/>'s<see cref="M:Quartz.Spi.IOperableTrigger.Triggered(Quartz.ICalendar)"/>  method.
 
-             </param>
 
-         </member>
 
-         <member name="P:Quartz.ITriggerListener.Name">
 
-             <summary>
 
-             Get the name of the <see cref="T:Quartz.ITriggerListener"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Listener.BroadcastTriggerListener.#ctor(System.String)">
 
-             <summary>
 
-             Construct an instance with the given name.
 
-             </summary>
 
-             <remarks>
 
-             (Remember to add some delegate listeners!)
 
-             </remarks>
 
-             <param name="name">the name of this instance</param>
 
-         </member>
 
-         <member name="M:Quartz.Listener.BroadcastTriggerListener.#ctor(System.String,System.Collections.Generic.IList{Quartz.ITriggerListener})">
 
-             <summary>
 
-             Construct an instance with the given name, and List of listeners.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="name">the name of this instance</param>
 
-             <param name="listeners">the initial List of TriggerListeners to broadcast to.</param>
 
-         </member>
 
-         <member name="T:Quartz.Listener.JobChainingJobListener">
 
-              <summary>
 
-              Keeps a collection of mappings of which Job to trigger after the completion
 
-              of a given job.  If this listener is notified of a job completing that has a
 
-              mapping, then it will then attempt to trigger the follow-up job.  This
 
-              achieves "job chaining", or a "poor man's workflow".
 
-             </summary>
 
-              <remarks>
 
-              <para>
 
-              Generally an instance of this listener would be registered as a global
 
-              job listener, rather than being registered directly to a given job.
 
-              </para>
 
-              <para>
 
-              If for some reason there is a failure creating the trigger for the
 
-              follow-up job (which would generally only be caused by a rare serious
 
-              failure in the system, or the non-existence of the follow-up job), an error
 
-              messsage is logged, but no other action is taken. If you need more rigorous
 
-              handling of the error, consider scheduling the triggering of the flow-up
 
-              job within your job itself.
 
-              </para>
 
-             </remarks>
 
-              <author>James House</author>
 
-              <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Listener.JobListenerSupport">
 
-             <summary>
 
-             A helpful abstract base class for implementors of <see cref="T:Quartz.IJobListener"/>.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The methods in this class are empty so you only need to override the  
 
-             subset for the <see cref="T:Quartz.IJobListener"/> events you care about.
 
-             </para>
 
-             
 
-             <para>
 
-             You are required to implement <see cref="P:Quartz.IJobListener.Name"/> 
 
-             to return the unique name of your <see cref="T:Quartz.IJobListener"/>.  
 
-             </para>
 
-             </remarks>
 
-             <author>Marko Lahma (.NET)</author>
 
-             <seealso cref="T:Quartz.IJobListener"/>
 
-         </member>
 
-         <member name="M:Quartz.Listener.JobListenerSupport.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Listener.JobListenerSupport"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Listener.JobListenerSupport.JobToBeExecuted(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             is about to be executed (an associated <see cref="T:Quartz.ITrigger"/>
 
-             has occured).
 
-             <para>
 
-             This method will not be invoked if the execution of the Job was vetoed
 
-             by a <see cref="T:Quartz.ITriggerListener"/>.
 
-             </para>
 
-             </summary>
 
-             <param name="context"></param>
 
-             <seealso cref="M:Quartz.Listener.JobListenerSupport.JobExecutionVetoed(Quartz.IJobExecutionContext)"/>
 
-         </member>
 
-         <member name="M:Quartz.Listener.JobListenerSupport.JobExecutionVetoed(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             was about to be executed (an associated <see cref="T:Quartz.ITrigger"/>
 
-             has occured), but a <see cref="T:Quartz.ITriggerListener"/> vetoed it's
 
-             execution.
 
-             </summary>
 
-             <param name="context"></param>
 
-             <seealso cref="M:Quartz.Listener.JobListenerSupport.JobToBeExecuted(Quartz.IJobExecutionContext)"/>
 
-         </member>
 
-         <member name="M:Quartz.Listener.JobListenerSupport.JobWasExecuted(Quartz.IJobExecutionContext,Quartz.JobExecutionException)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> after a <see cref="T:Quartz.IJobDetail"/>
 
-             has been executed, and be for the associated <see cref="T:Quartz.ITrigger"/>'s
 
-             <see cref="M:Quartz.Spi.IOperableTrigger.Triggered(Quartz.ICalendar)"/> method has been called.
 
-             </summary>
 
-             <param name="context"></param>
 
-             <param name="jobException"></param>
 
-         </member>
 
-         <member name="P:Quartz.Listener.JobListenerSupport.Log">
 
-             <summary>
 
-             Get the <see cref="T:Common.Logging.ILog"/> for this  class's category.  
 
-             This should be used by subclasses for logging.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Listener.JobListenerSupport.Name">
 
-             <summary>
 
-             Get the name of the <see cref="T:Quartz.IJobListener"/>.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="M:Quartz.Listener.JobChainingJobListener.#ctor(System.String)">
 
-             <summary>
 
-             Construct an instance with the given name.
 
-             </summary>
 
-             <param name="name">The name of this instance.</param>
 
-         </member>
 
-         <member name="M:Quartz.Listener.JobChainingJobListener.AddJobChainLink(Quartz.JobKey,Quartz.JobKey)">
 
-             <summary>
 
-             Add a chain mapping - when the Job identified by the first key completes
 
-             the job identified by the second key will be triggered.
 
-             </summary>
 
-             <param name="firstJob">a JobKey with the name and group of the first job</param>
 
-             <param name="secondJob">a JobKey with the name and group of the follow-up job</param>
 
-         </member>
 
-         <member name="T:Quartz.Listener.TriggerListenerSupport">
 
-              <summary>
 
-               A helpful abstract base class for implementors of 
 
-              <see cref="T:Quartz.ITriggerListener"/>.
 
-               </summary>
 
-              <remarks>
 
-              <para>
 
-              The methods in this class are empty so you only need to override the  
 
-              subset for the <see cref="T:Quartz.ITriggerListener"/> events
 
-              you care about.
 
-              </para>
 
-              
 
-              <para>
 
-              You are required to implement <see cref="P:Quartz.ITriggerListener.Name"/> 
 
-              to return the unique name of your <see cref="T:Quartz.ITriggerListener"/>.  
 
-              </para>
 
-             </remarks>
 
-              <author>Marko Lahma (.NET)</author>
 
-              <seealso cref="T:Quartz.ITriggerListener"/>
 
-         </member>
 
-         <member name="P:Quartz.Listener.TriggerListenerSupport.Log">
 
-             <summary>
 
-             Get the <see cref="T:Common.Logging.ILog"/> for this
 
-             class's category.  This should be used by subclasses for logging.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Listener.TriggerListenerSupport.Name">
 
-             <summary>
 
-             Get the name of the <see cref="T:Quartz.ITriggerListener"/>.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="T:Quartz.Plugin.History.LoggingJobHistoryPlugin">
 
-             <summary>
 
-             Logs a history of all job executions (and execution vetos) via common
 
-             logging.
 
-             </summary>
 
-             <remarks>
 
-             	<para>
 
-             The logged message is customizable by setting one of the following message
 
-             properties to a string that conforms to the syntax of <see cref="M:System.String.Format(System.String,System.Object)"/>.
 
-             </para>
 
-             	<para>
 
-             JobToBeFiredMessage - available message data are: <table>
 
-             			<tr>
 
-             				<th>Element</th>
 
-             				<th>Data Type</th>
 
-             				<th>Description</th>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>0</td>
 
-             				<td>String</td>
 
-             				<td>The Job's Name.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>1</td>
 
-             				<td>String</td>
 
-             				<td>The Job's Group.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>2</td>
 
-             				<td>Date</td>
 
-             				<td>The current time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>3</td>
 
-             				<td>String</td>
 
-             				<td>The Trigger's name.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>4</td>
 
-             				<td>String</td>
 
-             				<td>The Triggers's group.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>5</td>
 
-             				<td>Date</td>
 
-             				<td>The scheduled fire time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>6</td>
 
-             				<td>Date</td>
 
-             				<td>The next scheduled fire time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>7</td>
 
-             				<td>Integer</td>
 
-             				<td>The re-fire count from the JobExecutionContext.</td>
 
-             			</tr>
 
-             		</table>
 
-             The default message text is <i>"Job {1}.{0} fired (by trigger {4}.{3}) at: {2:HH:mm:ss MM/dd/yyyy}"</i>
 
-             	</para>
 
-             	<para>
 
-             JobSuccessMessage - available message data are: <table>
 
-             			<tr>
 
-             				<th>Element</th>
 
-             				<th>Data Type</th>
 
-             				<th>Description</th>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>0</td>
 
-             				<td>String</td>
 
-             				<td>The Job's Name.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>1</td>
 
-             				<td>String</td>
 
-             				<td>The Job's Group.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>2</td>
 
-             				<td>Date</td>
 
-             				<td>The current time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>3</td>
 
-             				<td>String</td>
 
-             				<td>The Trigger's name.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>4</td>
 
-             				<td>String</td>
 
-             				<td>The Triggers's group.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>5</td>
 
-             				<td>Date</td>
 
-             				<td>The scheduled fire time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>6</td>
 
-             				<td>Date</td>
 
-             				<td>The next scheduled fire time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>7</td>
 
-             				<td>Integer</td>
 
-             				<td>The re-fire count from the JobExecutionContext.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>8</td>
 
-             				<td>Object</td>
 
-             				<td>The string value (toString() having been called) of the result (if any) 
 
-             that the Job set on the JobExecutionContext, with on it.  "NULL" if no 
 
-             result was set.</td>
 
-             			</tr>
 
-             		</table>
 
-             The default message text is <i>"Job {1}.{0} execution complete at {2:HH:mm:ss MM/dd/yyyy} and reports: {8}"</i>
 
-             	</para>
 
-             	<para>
 
-             JobFailedMessage - available message data are: <table>
 
-             			<tr>
 
-             				<th>Element</th>
 
-             				<th>Data Type</th>
 
-             				<th>Description</th>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>0</td>
 
-             				<td>String</td>
 
-             				<td>The Job's Name.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>1</td>
 
-             				<td>String</td>
 
-             				<td>The Job's Group.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>2</td>
 
-             				<td>Date</td>
 
-             				<td>The current time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>3</td>
 
-             				<td>String</td>
 
-             				<td>The Trigger's name.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>4</td>
 
-             				<td>String</td>
 
-             				<td>The Triggers's group.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>5</td>
 
-             				<td>Date</td>
 
-             				<td>The scheduled fire time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>6</td>
 
-             				<td>Date</td>
 
-             				<td>The next scheduled fire time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>7</td>
 
-             				<td>Integer</td>
 
-             				<td>The re-fire count from the JobExecutionContext.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>8</td>
 
-             				<td>String</td>
 
-             				<td>The message from the thrown JobExecution Exception.
 
-             </td>
 
-             			</tr>
 
-             		</table>
 
-             The default message text is <i>"Job {1}.{0} execution failed at {2:HH:mm:ss MM/dd/yyyy} and reports: {8}"</i>
 
-             	</para>
 
-             	<para>
 
-             JobWasVetoedMessage - available message data are: <table>
 
-             			<tr>
 
-             				<th>Element</th>
 
-             				<th>Data Type</th>
 
-             				<th>Description</th>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>0</td>
 
-             				<td>String</td>
 
-             				<td>The Job's Name.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>1</td>
 
-             				<td>String</td>
 
-             				<td>The Job's Group.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>2</td>
 
-             				<td>Date</td>
 
-             				<td>The current time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>3</td>
 
-             				<td>String</td>
 
-             				<td>The Trigger's name.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>4</td>
 
-             				<td>String</td>
 
-             				<td>The Triggers's group.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>5</td>
 
-             				<td>Date</td>
 
-             				<td>The scheduled fire time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>6</td>
 
-             				<td>Date</td>
 
-             				<td>The next scheduled fire time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>7</td>
 
-             				<td>Integer</td>
 
-             				<td>The re-fire count from the JobExecutionContext.</td>
 
-             			</tr>
 
-             		</table>
 
-             The default message text is <i>"Job {1}.{0} was vetoed.  It was to be fired 
 
-             (by trigger {4}.{3}) at: {2:HH:mm:ss MM/dd/yyyy}"</i>
 
-             	</para>
 
-             </remarks>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Spi.ISchedulerPlugin">
 
-             <summary>
 
-             Provides an interface for a class to become a "plugin" to Quartz.
 
-             </summary>
 
-             <remarks>
 
-             Plugins can do virtually anything you wish, though the most interesting ones
 
-             will obviously interact with the scheduler in some way - either actively: by
 
-             invoking actions on the scheduler, or passively: by being a <see cref="T:Quartz.IJobListener"/>,
 
-             <see cref="T:Quartz.ITriggerListener"/>, and/or <see cref="T:Quartz.ISchedulerListener"/>.
 
-             <para>
 
-             If you use <see cref="T:Quartz.Impl.StdSchedulerFactory"/> to
 
-             Initialize your Scheduler, it can also create and Initialize your plugins -
 
-             look at the configuration docs for details.
 
-             </para>
 
-             <para>
 
-             If you need direct access your plugin, you can have it explicitly put a 
 
-             reference to itself in the <see cref="T:Quartz.IScheduler"/>'s 
 
-             <see cref="T:Quartz.SchedulerContext"/> as part of its
 
-             <see cref="M:Quartz.Spi.ISchedulerPlugin.Initialize(System.String,Quartz.IScheduler)"/> method.
 
-             </para>
 
-             </remarks>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ISchedulerPlugin.Initialize(System.String,Quartz.IScheduler)">
 
-             <summary>
 
-             Called during creation of the <see cref="T:Quartz.IScheduler"/> in order to give
 
-             the <see cref="T:Quartz.Spi.ISchedulerPlugin"/> a chance to Initialize.
 
-             </summary>
 
-             <remarks>
 
-             At this point, the Scheduler's <see cref="T:Quartz.Spi.IJobStore"/> is not yet
 
-             <para>
 
-             If you need direct access your plugin, you can have it explicitly put a 
 
-             reference to itself in the <see cref="T:Quartz.IScheduler"/>'s 
 
-             <see cref="T:Quartz.SchedulerContext"/> as part of its
 
-             <see cref="M:Quartz.Spi.ISchedulerPlugin.Initialize(System.String,Quartz.IScheduler)"/> method.
 
-             </para>
 
-             </remarks>
 
-             <param name="pluginName">
 
-             The name by which the plugin is identified.
 
-             </param>
 
-             <param name="sched">
 
-             The scheduler to which the plugin is registered.
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ISchedulerPlugin.Start">
 
-             <summary>
 
-             Called when the associated <see cref="T:Quartz.IScheduler"/> is started, in order
 
-             to let the plug-in know it can now make calls into the scheduler if it
 
-             needs to.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ISchedulerPlugin.Shutdown">
 
-             <summary>
 
-             Called in order to inform the <see cref="T:Quartz.Spi.ISchedulerPlugin"/> that it
 
-             should free up all of it's resources because the scheduler is shutting
 
-             down.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingJobHistoryPlugin.Initialize(System.String,Quartz.IScheduler)">
 
-             <summary>
 
-             Called during creation of the <see cref="T:Quartz.IScheduler"/> in order to give
 
-             the <see cref="T:Quartz.Spi.ISchedulerPlugin"/> a chance to Initialize.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingJobHistoryPlugin.Start">
 
-             <summary>
 
-             Called when the associated <see cref="T:Quartz.IScheduler"/> is started, in order
 
-             to let the plug-in know it can now make calls into the scheduler if it
 
-             needs to.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingJobHistoryPlugin.Shutdown">
 
-             <summary> 
 
-             Called in order to inform the <see cref="T:Quartz.Spi.ISchedulerPlugin"/> that it
 
-             should free up all of it's resources because the scheduler is shutting
 
-             down.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingJobHistoryPlugin.JobToBeExecuted(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-                 Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/> is
 
-                 about to be executed (an associated <see cref="T:Quartz.ITrigger"/> has occurred). 
 
-                 <para>
 
-                     This method will not be invoked if the execution of the Job was vetoed by a
 
-                     <see cref="T:Quartz.ITriggerListener"/>.
 
-                 </para>
 
-             </summary>
 
-             <seealso cref="M:Quartz.Plugin.History.LoggingJobHistoryPlugin.JobExecutionVetoed(Quartz.IJobExecutionContext)"/>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingJobHistoryPlugin.JobWasExecuted(Quartz.IJobExecutionContext,Quartz.JobExecutionException)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> after a <see cref="T:Quartz.IJobDetail"/>
 
-             has been executed, and be for the associated <see cref="T:Quartz.ITrigger"/>'s
 
-             <see cref="M:Quartz.Spi.IOperableTrigger.Triggered(Quartz.ICalendar)"/> method has been called.
 
-             </summary>
 
-             <param name="context"></param>
 
-             <param name="jobException"></param>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingJobHistoryPlugin.JobExecutionVetoed(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             was about to be executed (an associated <see cref="T:Quartz.ITrigger"/>
 
-             has occured), but a <see cref="T:Quartz.ITriggerListener"/> vetoed it's
 
-             execution.
 
-             </summary>
 
-             <param name="context"></param>
 
-             <seealso cref="M:Quartz.Plugin.History.LoggingJobHistoryPlugin.JobToBeExecuted(Quartz.IJobExecutionContext)"/>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingJobHistoryPlugin.Log">
 
-             <summary>
 
-             Logger instance to use. Defaults to common logging.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingJobHistoryPlugin.JobSuccessMessage">
 
-             <summary> 
 
-             Get or sets the message that is logged when a Job successfully completes its 
 
-             execution.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingJobHistoryPlugin.JobFailedMessage">
 
-             <summary> 
 
-             Get or sets the message that is logged when a Job fails its 
 
-             execution.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingJobHistoryPlugin.JobToBeFiredMessage">
 
-             <summary> 
 
-             Gets or sets the message that is logged when a Job is about to Execute.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingJobHistoryPlugin.JobWasVetoedMessage">
 
-             <summary> 
 
-             Gets or sets the message that is logged when a Job execution is vetoed by a
 
-             trigger listener.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingJobHistoryPlugin.Name">
 
-             <summary>
 
-             Get the name of the <see cref="T:Quartz.IJobListener"/>.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="T:Quartz.Plugin.History.LoggingTriggerHistoryPlugin">
 
-             <summary> 
 
-             Logs a history of all trigger firings via the Jakarta Commons-Logging
 
-             framework.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The logged message is customizable by setting one of the following message
 
-             properties to a string that conforms to the syntax of <see cref="M:System.String.Format(System.String,System.Object[])"/>.
 
-             </para>
 
-             
 
-             <para>
 
-             TriggerFiredMessage - available message data are: <table>
 
-             <tr>
 
-             <th>Element</th>
 
-             <th>Data Type</th>
 
-             <th>Description</th>
 
-             </tr>
 
-             <tr>
 
-             <td>0</td>
 
-             <td>String</td>
 
-             <td>The Trigger's Name.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>1</td>
 
-             <td>String</td>
 
-             <td>The Trigger's Group.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>2</td>
 
-             <td>Date</td>
 
-             <td>The scheduled fire time.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>3</td>
 
-             <td>Date</td>
 
-             <td>The next scheduled fire time.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>4</td>
 
-             <td>Date</td>
 
-             <td>The actual fire time.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>5</td>
 
-             <td>String</td>
 
-             <td>The Job's name.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>6</td>
 
-             <td>String</td>
 
-             <td>The Job's group.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>7</td>
 
-             <td>Integer</td>
 
-             <td>The re-fire count from the JobExecutionContext.</td>
 
-             </tr>
 
-             </table>
 
-             
 
-             The default message text is <i>"Trigger {1}.{0} fired job {6}.{5} at: {4,
 
-             date, HH:mm:ss MM/dd/yyyy"</i>
 
-             </para>
 
-             
 
-             <para>
 
-             TriggerMisfiredMessage - available message data are: <table>
 
-             <tr>
 
-             <th>Element</th>
 
-             <th>Data Type</th>
 
-             <th>Description</th>
 
-             </tr>
 
-             <tr>
 
-             <td>0</td>
 
-             <td>String</td>
 
-             <td>The Trigger's Name.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>1</td>
 
-             <td>String</td>
 
-             <td>The Trigger's Group.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>2</td>
 
-             <td>Date</td>
 
-             <td>The scheduled fire time.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>3</td>
 
-             <td>Date</td>
 
-             <td>The next scheduled fire time.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>4</td>
 
-             <td>Date</td>
 
-             <td>The actual fire time. (the time the misfire was detected/handled)</td>
 
-             </tr>
 
-             <tr>
 
-             <td>5</td>
 
-             <td>String</td>
 
-             <td>The Job's name.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>6</td>
 
-             <td>String</td>
 
-             <td>The Job's group.</td>
 
-             </tr>
 
-             </table>
 
-             
 
-             The default message text is <i>"Trigger {1}.{0} misfired job {6}.{5} at:
 
-             {4, date, HH:mm:ss MM/dd/yyyy}. Should have fired at: {3, date, HH:mm:ss
 
-             MM/dd/yyyy"</i>
 
-             </para>
 
-             
 
-             <para>
 
-             TriggerCompleteMessage - available message data are: <table>
 
-             <tr>
 
-             <th>Element</th>
 
-             <th>Data Type</th>
 
-             <th>Description</th>
 
-             </tr>
 
-             <tr>
 
-             <td>0</td>
 
-             <td>String</td>
 
-             <td>The Trigger's Name.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>1</td>
 
-             <td>String</td>
 
-             <td>The Trigger's Group.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>2</td>
 
-             <td>Date</td>
 
-             <td>The scheduled fire time.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>3</td>
 
-             <td>Date</td>
 
-             <td>The next scheduled fire time.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>4</td>
 
-             <td>Date</td>
 
-             <td>The job completion time.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>5</td>
 
-             <td>String</td>
 
-             <td>The Job's name.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>6</td>
 
-             <td>String</td>
 
-             <td>The Job's group.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>7</td>
 
-             <td>Integer</td>
 
-             <td>The re-fire count from the JobExecutionContext.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>8</td>
 
-             <td>Integer</td>
 
-             <td>The trigger's resulting instruction code.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>9</td>
 
-             <td>String</td>
 
-             <td>A human-readable translation of the trigger's resulting instruction
 
-             code.</td>
 
-             </tr>
 
-             </table>
 
-             
 
-             The default message text is <i>"Trigger {1}.{0} completed firing job
 
-             {6}.{5} at {4, date, HH:mm:ss MM/dd/yyyy} with resulting trigger instruction
 
-             code: {9"</i>
 
-             </para>
 
-             </remarks>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.Initialize(System.String,Quartz.IScheduler)">
 
-             <summary>
 
-             Called during creation of the <see cref="T:Quartz.IScheduler"/> in order to give
 
-             the <see cref="T:Quartz.Spi.ISchedulerPlugin"/> a chance to Initialize.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.Start">
 
-             <summary>
 
-             Called when the associated <see cref="T:Quartz.IScheduler"/> is started, in order
 
-             to let the plug-in know it can now make calls into the scheduler if it
 
-             needs to.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.Shutdown">
 
-             <summary>
 
-             Called in order to inform the <see cref="T:Quartz.Spi.ISchedulerPlugin"/> that it
 
-             should free up all of it's resources because the scheduler is shutting
 
-             down.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.TriggerFired(Quartz.ITrigger,Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             has fired, and it's associated <see cref="T:Quartz.IJobDetail"/>
 
-             is about to be executed.
 
-             <para>
 
-             It is called before the <see cref="M:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.VetoJobExecution(Quartz.ITrigger,Quartz.IJobExecutionContext)"/> method of this
 
-             interface.
 
-             </para>
 
-             </summary>
 
-             <param name="trigger">The <see cref="T:Quartz.ITrigger"/> that has fired.</param>
 
-             <param name="context">The <see cref="T:Quartz.IJobExecutionContext"/> that will be passed to the <see cref="T:Quartz.IJob"/>'s <see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> method.</param>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.TriggerMisfired(Quartz.ITrigger)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             has misfired.
 
-             <para>
 
-             Consideration should be given to how much time is spent in this method,
 
-             as it will affect all triggers that are misfiring.  If you have lots
 
-             of triggers misfiring at once, it could be an issue it this method
 
-             does a lot.
 
-             </para>
 
-             </summary>
 
-             <param name="trigger">The <see cref="T:Quartz.ITrigger"/> that has misfired.</param>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.TriggerComplete(Quartz.ITrigger,Quartz.IJobExecutionContext,Quartz.SchedulerInstruction)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             has fired, it's associated <see cref="T:Quartz.IJobDetail"/>
 
-             has been executed, and it's <see cref="M:Quartz.Spi.IOperableTrigger.Triggered(Quartz.ICalendar)"/> method has been
 
-             called.
 
-             </summary>
 
-             <param name="trigger">The <see cref="T:Quartz.ITrigger"/> that was fired.</param>
 
-             <param name="context">The <see cref="T:Quartz.IJobExecutionContext"/> that was passed to the
 
-             <see cref="T:Quartz.IJob"/>'s <see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> method.</param>
 
-             <param name="triggerInstructionCode">The result of the call on the <see cref="T:Quartz.Spi.IOperableTrigger"/>'s <see cref="M:Quartz.Spi.IOperableTrigger.Triggered(Quartz.ICalendar)"/>  method.</param>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.VetoJobExecution(Quartz.ITrigger,Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             has fired, and it's associated <see cref="T:Quartz.IJobDetail"/>
 
-             is about to be executed.
 
-             <para>
 
-             It is called after the <see cref="M:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.TriggerFired(Quartz.ITrigger,Quartz.IJobExecutionContext)"/> method of this
 
-             interface.
 
-             </para>
 
-             </summary>
 
-             <param name="trigger">The <see cref="T:Quartz.ITrigger"/> that has fired.</param>
 
-             <param name="context">The <see cref="T:Quartz.IJobExecutionContext"/> that will be passed to
 
-             the <see cref="T:Quartz.IJob"/>'s <see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> method.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.Log">
 
-             <summary>
 
-             Logger instance to use. Defaults to common logging.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.TriggerCompleteMessage">
 
-             <summary> 
 
-             Get or set the message that is printed upon the completion of a trigger's
 
-             firing.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.TriggerFiredMessage">
 
-             <summary> 
 
-             Get or set the message that is printed upon a trigger's firing.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.TriggerMisfiredMessage">
 
-             <summary> 
 
-             Get or set the message that is printed upon a trigger's mis-firing.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.Name">
 
-             <summary>
 
-             Get the name of the <see cref="T:Quartz.ITriggerListener"/>.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="T:Quartz.Plugin.Management.ShutdownHookPlugin">
 
-             <summary> 
 
-             This plugin catches the event of the VM terminating (such as upon a CRTL-C)
 
-             and tells the scheuler to Shutdown.
 
-             </summary>
 
-             <seealso cref="M:Quartz.IScheduler.Shutdown(System.Boolean)"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.Management.ShutdownHookPlugin.Initialize(System.String,Quartz.IScheduler)">
 
-             <summary>
 
-             Called during creation of the <see cref="T:Quartz.IScheduler"/> in order to give
 
-             the <see cref="T:Quartz.Spi.ISchedulerPlugin"/> a chance to Initialize.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.Management.ShutdownHookPlugin.Start">
 
-             <summary>
 
-             Called when the associated <see cref="T:Quartz.IScheduler"/> is started, in order
 
-             to let the plug-in know it can now make calls into the scheduler if it
 
-             needs to.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.Management.ShutdownHookPlugin.Shutdown">
 
-             <summary>
 
-             Called in order to inform the <see cref="T:Quartz.Spi.ISchedulerPlugin"/> that it
 
-             should free up all of it's resources because the scheduler is shutting
 
-             down.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.Management.ShutdownHookPlugin.CleanShutdown">
 
-             <summary> 
 
-             Determine whether or not the plug-in is configured to cause a clean
 
-             Shutdown of the scheduler.
 
-             <para>
 
-             The default value is <see langword="true"/>.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="M:Quartz.IScheduler.Shutdown(System.Boolean)"/>
 
-         </member>
 
-         <member name="T:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin">
 
-              <summary> 
 
-              This plugin loads XML file(s) to add jobs and schedule them with triggers
 
-              as the scheduler is initialized, and can optionally periodically scan the
 
-              file for changes.
 
-             </summary>
 
-              <remarks>
 
-              The periodically scanning of files for changes is not currently supported in a 
 
-              clustered environment.
 
-              </remarks> 
 
-              <author>James House</author>
 
-              <author>Pierre Awaragi</author>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.FileUpdated(System.String)">
 
-             <summary>
 
-             
 
-             </summary>
 
-             <param name="fName"></param>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.Initialize(System.String,Quartz.IScheduler)">
 
-             <summary>
 
-             Called during creation of the <see cref="T:Quartz.IScheduler"/> in order to give
 
-             the <see cref="T:Quartz.Spi.ISchedulerPlugin"/> a chance to initialize.
 
-             </summary>
 
-             <param name="pluginName">The name.</param>
 
-             <param name="sched">The scheduler.</param>
 
-             <throws>SchedulerConfigException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.Start">
 
-             <summary>
 
-             Called when the associated <see cref="T:Quartz.IScheduler"/> is started, in order
 
-             to let the plug-in know it can now make calls into the scheduler if it
 
-             needs to.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.BuildJobTriggerName(System.String)">
 
-             <summary>
 
-             Helper method for generating unique job/trigger name for the  
 
-             file scanning jobs (one per FileJob).  The unique names are saved
 
-             in jobTriggerNameSet.
 
-             </summary>
 
-             <param name="fileBasename"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.Shutdown">
 
-             <summary>
 
-             Called in order to inform the <see cref="T:Quartz.Spi.ISchedulerPlugin"/> that it
 
-             should free up all of it's resources because the scheduler is shutting
 
-             down.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.Log">
 
-             <summary>
 
-             Gets the log.
 
-             </summary>
 
-             <value>The log.</value>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.FileNames">
 
-             <summary> 
 
-             Comma separated list of file names (with paths) to the XML files that should be read.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.ScanInterval">
 
-             <summary> 
 
-             The interval at which to scan for changes to the file.  
 
-             If the file has been changed, it is re-loaded and parsed.   The default 
 
-             value for the interval is 0, which disables scanning.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.FailOnFileNotFound">
 
-             <summary> 
 
-             Whether or not initialization of the plugin should fail (throw an
 
-             exception) if the file cannot be found. Default is <see langword="true" />.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.JobFile">
 
-             <summary>
 
-             Information about a file that should be processed by <see cref="T:Quartz.Xml.XMLSchedulingDataProcessor"/>. 
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.DefaultObjectSerializer">
 
-             <summary>
 
-             Default object serialization strategy that uses <see cref="T:System.Runtime.Serialization.Formatters.Binary.BinaryFormatter"/> 
 
-             under the hood.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="T:Quartz.Spi.IObjectSerializer">
 
-             <summary>
 
-             Interface for object serializers.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-             <seealso cref="T:Quartz.Simpl.DefaultObjectSerializer"/>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IObjectSerializer.Serialize``1(``0)">
 
-             <summary>
 
-             Serializes given object as bytes 
 
-             that can be stored to permanent stores.
 
-             </summary>
 
-             <param name="obj">Object to serialize, always non-null.</param>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IObjectSerializer.DeSerialize``1(System.Byte[])">
 
-             <summary>
 
-             Deserializes object from byte array presentation.
 
-             </summary>
 
-             <param name="data">Data to deserialize object from, always non-null and non-empty.</param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.DefaultObjectSerializer.Serialize``1(``0)">
 
-             <summary>
 
-             Serializes given object as bytes 
 
-             that can be stored to permanent stores.
 
-             </summary>
 
-             <param name="obj">Object to serialize.</param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.DefaultObjectSerializer.DeSerialize``1(System.Byte[])">
 
-             <summary>
 
-             Deserializes object from byte array presentation.
 
-             </summary>
 
-             <param name="data">Data to deserialize object from.</param>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.HostNameBasedIdGenerator">
 
-             <summary>
 
-             Helper base class for host name lookup requiring instance id generators.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="T:Quartz.Spi.IInstanceIdGenerator">
 
-             <summary>
 
-             An IInstanceIdGenerator is responsible for generating the clusterwide unique 
 
-             instance id for a <see cref="T:Quartz.IScheduler"/> node.
 
-             </summary>
 
-             <remarks>
 
-             This interface may be of use to those wishing to have specific control over 
 
-             the mechanism by which the <see cref="T:Quartz.IScheduler"/> instances in their 
 
-             application are named.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.Simpl.SimpleInstanceIdGenerator"/>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IInstanceIdGenerator.GenerateInstanceId">
 
-             <summary>
 
-             Generate the instance id for a <see cref="T:Quartz.IScheduler"/>
 
-             </summary>
 
-             <returns> The clusterwide unique instance id.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.HostNameBasedIdGenerator.GenerateInstanceId">
 
-             <summary>
 
-             Generate the instance id for a <see cref="T:Quartz.IScheduler"/>
 
-             </summary>
 
-             <returns> The clusterwide unique instance id.
 
-             </returns>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.HostnameInstanceIdGenerator">
 
-             <summary>
 
-             <see cref="T:Quartz.Spi.IInstanceIdGenerator"/> that names the scheduler instance using 
 
-             just the machine hostname.
 
-             </summary>
 
-             <remarks>
 
-             This class is useful when you know that your scheduler instance will be the 
 
-             only one running on a particular machine.  Each time the scheduler is 
 
-             restarted, it will get the same instance id as long as the machine is not 
 
-             renamed.
 
-             </remarks>
 
-             <author>Marko Lahma (.NET)</author>
 
-             <seealso cref="T:Quartz.Spi.IInstanceIdGenerator"/>
 
-             <seealso cref="T:Quartz.Simpl.SimpleInstanceIdGenerator"/>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.HostnameInstanceIdGenerator.GenerateInstanceId">
 
-             <summary>
 
-             Generate the instance id for a <see cref="T:Quartz.IScheduler"/>
 
-             </summary>
 
-             <returns>The clusterwide unique instance id.</returns>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.PropertySettingJobFactory">
 
-             <summary> 
 
-             A JobFactory that instantiates the Job instance (using the default no-arg
 
-             constructor, or more specifically: <see cref="M:Quartz.Util.ObjectUtils.InstantiateType``1(System.Type)"/>), and
 
-             then attempts to set all values from the <see cref="T:Quartz.IJobExecutionContext"/> and
 
-             the <see cref="T:Quartz.IJobExecutionContext"/>'s merged <see cref="T:Quartz.JobDataMap"/> onto 
 
-             properties of the job.
 
-             </summary>
 
-             <remarks>   
 
-             Set the WarnIfPropertyNotFound property to true if you'd like noisy logging in
 
-             the case of values in the <see cref="T:Quartz.JobDataMap"/> not mapping to properties on your job
 
-             class. This may be useful for troubleshooting typos of property names, etc.
 
-             but very noisy if you regularly (and purposely) have extra things in your
 
-              <see cref="T:Quartz.JobDataMap"/>.
 
-             Also of possible interest is the ThrowIfPropertyNotFound property which
 
-             will throw exceptions on unmatched JobDataMap keys.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.Spi.IJobFactory"/>
 
-             <seealso cref="T:Quartz.Simpl.SimpleJobFactory"/>
 
-             <seealso cref="T:Quartz.SchedulerContext"/>
 
-             <seealso cref="P:Quartz.IJobExecutionContext.MergedJobDataMap"/>
 
-             <seealso cref="P:Quartz.Simpl.PropertySettingJobFactory.WarnIfPropertyNotFound"/>
 
-             <seealso cref="P:Quartz.Simpl.PropertySettingJobFactory.ThrowIfPropertyNotFound"/>
 
-             <author>James Houser</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.SimpleJobFactory">
 
-             <summary> 
 
-             The default JobFactory used by Quartz - simply calls 
 
-             <see cref="M:Quartz.Util.ObjectUtils.InstantiateType``1(System.Type)"/> on the job class.
 
-             </summary>
 
-             <seealso cref="T:Quartz.Spi.IJobFactory"/>
 
-             <seealso cref="T:Quartz.Simpl.PropertySettingJobFactory"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Spi.IJobFactory">
 
-             <summary>
 
-             A JobFactory is responsible for producing instances of <see cref="T:Quartz.IJob"/>
 
-             classes.
 
-             </summary>
 
-             <remarks>
 
-             This interface may be of use to those wishing to have their application
 
-             produce <see cref="T:Quartz.IJob"/> instances via some special mechanism, such as to
 
-             give the opertunity for dependency injection.
 
-             </remarks>
 
-             <seealso cref="P:Quartz.IScheduler.JobFactory"/>
 
-             <seealso cref="T:Quartz.Simpl.SimpleJobFactory"/>
 
-             <seealso cref="T:Quartz.Simpl.PropertySettingJobFactory"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobFactory.NewJob(Quartz.Spi.TriggerFiredBundle,Quartz.IScheduler)">
 
-             <summary> 
 
-             Called by the scheduler at the time of the trigger firing, in order to
 
-             produce a <see cref="T:Quartz.IJob"/> instance on which to call Execute.
 
-             </summary>
 
-             <remarks>
 
-             It should be extremely rare for this method to throw an exception -
 
-             basically only the the case where there is no way at all to instantiate
 
-             and prepare the Job for execution.  When the exception is thrown, the
 
-             Scheduler will move all triggers associated with the Job into the
 
-             <see cref="F:Quartz.TriggerState.Error"/> state, which will require human
 
-             intervention (e.g. an application restart after fixing whatever 
 
-             configuration problem led to the issue wih instantiating the Job. 
 
-             </remarks>
 
-             <param name="bundle">
 
-               The TriggerFiredBundle from which the <see cref="T:Quartz.IJobDetail"/>
 
-               and other info relating to the trigger firing can be obtained.
 
-             </param>
 
-             <param name="scheduler">a handle to the scheduler that is about to execute the job</param>
 
-             <throws>  SchedulerException if there is a problem instantiating the Job. </throws>
 
-             <returns> the newly instantiated Job
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobFactory.ReturnJob(Quartz.IJob)">
 
-             <summary>
 
-             Allows the the job factory to destroy/cleanup the job if needed.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleJobFactory.NewJob(Quartz.Spi.TriggerFiredBundle,Quartz.IScheduler)">
 
-             <summary>
 
-             Called by the scheduler at the time of the trigger firing, in order to
 
-             produce a <see cref="T:Quartz.IJob"/> instance on which to call Execute.
 
-             </summary>
 
-             <remarks>
 
-             It should be extremely rare for this method to throw an exception -
 
-             basically only the the case where there is no way at all to instantiate
 
-             and prepare the Job for execution.  When the exception is thrown, the
 
-             Scheduler will move all triggers associated with the Job into the
 
-             <see cref="F:Quartz.TriggerState.Error"/> state, which will require human
 
-             intervention (e.g. an application restart after fixing whatever
 
-             configuration problem led to the issue wih instantiating the Job.
 
-             </remarks>
 
-             <param name="bundle">The TriggerFiredBundle from which the <see cref="T:Quartz.IJobDetail"/>
 
-               and other info relating to the trigger firing can be obtained.</param>
 
-             <param name="scheduler"></param>
 
-             <returns>the newly instantiated Job</returns>
 
-             <throws>  SchedulerException if there is a problem instantiating the Job. </throws>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleJobFactory.ReturnJob(Quartz.IJob)">
 
-             <summary>
 
-             Allows the the job factory to destroy/cleanup the job if needed. 
 
-             No-op when using SimpleJobFactory.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.PropertySettingJobFactory.NewJob(Quartz.Spi.TriggerFiredBundle,Quartz.IScheduler)">
 
-             <summary>
 
-             Called by the scheduler at the time of the trigger firing, in order to
 
-             produce a <see cref="T:Quartz.IJob"/> instance on which to call Execute.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             It should be extremely rare for this method to throw an exception -
 
-             basically only the the case where there is no way at all to instantiate
 
-             and prepare the Job for execution.  When the exception is thrown, the
 
-             Scheduler will move all triggers associated with the Job into the
 
-             <see cref="F:Quartz.TriggerState.Error"/> state, which will require human
 
-             intervention (e.g. an application restart after fixing whatever
 
-             configuration problem led to the issue wih instantiating the Job.
 
-             </para>
 
-             </remarks>
 
-             <param name="bundle">The TriggerFiredBundle from which the <see cref="T:Quartz.IJobDetail"/>
 
-               and other info relating to the trigger firing can be obtained.</param>
 
-             <param name="scheduler"></param>
 
-             <returns>the newly instantiated Job</returns>
 
-             <throws>  SchedulerException if there is a problem instantiating the Job. </throws>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.PropertySettingJobFactory.SetObjectProperties(System.Object,Quartz.JobDataMap)">
 
-             <summary>
 
-             Sets the object properties.
 
-             </summary>
 
-             <param name="obj">The object to set properties to.</param>
 
-             <param name="data">The data to set.</param>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.PropertySettingJobFactory.ThrowIfPropertyNotFound">
 
-             <summary> 
 
-             Whether the JobInstantiation should fail and throw and exception if
 
-             a key (name) and value (type) found in the JobDataMap does not 
 
-             correspond to a proptery setter on the Job class.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.PropertySettingJobFactory.WarnIfPropertyNotFound">
 
-             <summary> 
 
-             Get or set whether a warning should be logged if
 
-             a key (name) and value (type) found in the JobDataMap does not 
 
-             correspond to a proptery setter on the Job class.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.RAMJobStore">
 
-             <summary>
 
-             This class implements a <see cref="T:Quartz.Spi.IJobStore"/> that
 
-             utilizes RAM as its storage device.
 
-             <para>
 
-             As you should know, the ramification of this is that access is extrememly
 
-             fast, but the data is completely volatile - therefore this <see cref="T:Quartz.Spi.IJobStore"/>
 
-             should not be used if true persistence between program shutdowns is
 
-             required.
 
-             </para>
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Sharada Jambula</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Simpl.RAMJobStore"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetFiredTriggerRecordId">
 
-             <summary>
 
-             Gets the fired trigger record id.
 
-             </summary>
 
-             <returns>The fired trigger record id.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.Initialize(Quartz.Spi.ITypeLoadHelper,Quartz.Spi.ISchedulerSignaler)">
 
-             <summary>
 
-             Called by the QuartzScheduler before the <see cref="T:Quartz.Spi.IJobStore"/> is
 
-             used, in order to give the it a chance to Initialize.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.SchedulerStarted">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the <see cref="T:Quartz.Spi.IJobStore"/> that
 
-             the scheduler has started.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.SchedulerPaused">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the JobStore that
 
-             the scheduler has been paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.SchedulerResumed">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the JobStore that
 
-             the scheduler has resumed after being paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.Shutdown">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the <see cref="T:Quartz.Spi.IJobStore"/> that
 
-             it should free up all of it's resources because the scheduler is
 
-             shutting down.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.ClearAllSchedulingData">
 
-             <summary>
 
-             Clears (deletes!) all scheduling data - all <see cref="T:Quartz.IJob"/>s, <see cref="T:Quartz.ITrigger"/>s
 
-             <see cref="T:Quartz.ICalendar"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.StoreJobAndTrigger(Quartz.IJobDetail,Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.IJobDetail"/> and <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <param name="newJob">The <see cref="T:Quartz.IJobDetail"/> to be stored.</param>
 
-             <param name="newTrigger">The <see cref="T:Quartz.ITrigger"/> to be stored.</param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.IsJobGroupPaused(System.String)">
 
-             <summary>
 
-             Returns true if the given job group is paused.
 
-             </summary>
 
-             <param name="groupName">Job group name</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.IsTriggerGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given TriggerGroup is paused.
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.StoreJob(Quartz.IJobDetail,System.Boolean)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-             <param name="newJob">The <see cref="T:Quartz.IJob"/> to be stored.</param>
 
-             <param name="replaceExisting">If <see langword="true"/>, any <see cref="T:Quartz.IJob"/> existing in the
 
-             <see cref="T:Quartz.Spi.IJobStore"/> with the same name and group should be
 
-             over-written.</param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.RemoveJob(Quartz.JobKey)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.IJob"/> with the given
 
-             name, and any <see cref="T:Quartz.ITrigger"/> s that reference
 
-             it.
 
-             </summary>
 
-             <returns>
 
-             	<see langword="true"/> if a <see cref="T:Quartz.IJob"/> with the given name and
 
-             group was found and removed from the store.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.RemoveTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.ITrigger"/> with the
 
-             given name.
 
-             </summary>
 
-             <returns>
 
-             	<see langword="true"/> if a <see cref="T:Quartz.ITrigger"/> with the given
 
-             name and group was found and removed from the store.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.StoreTrigger(Quartz.Spi.IOperableTrigger,System.Boolean)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <param name="newTrigger">The <see cref="T:Quartz.ITrigger"/> to be stored.</param>
 
-             <param name="replaceExisting">If <see langword="true"/>, any <see cref="T:Quartz.ITrigger"/> existing in
 
-             the <see cref="T:Quartz.Spi.IJobStore"/> with the same name and group should
 
-             be over-written.</param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.RemoveTrigger(Quartz.TriggerKey,System.Boolean)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.ITrigger"/> with the
 
-             given name.
 
-             
 
-             </summary>
 
-             <returns>
 
-             	<see langword="true"/> if a <see cref="T:Quartz.ITrigger"/> with the given
 
-             name and group was found and removed from the store.
 
-             </returns>
 
-             <param name="key">The <see cref="T:Quartz.ITrigger"/> to be removed.</param>
 
-             <param name="removeOrphanedJob">Whether to delete orpahaned job details from scheduler if job becomes orphaned from removing the trigger.</param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.ReplaceTrigger(Quartz.TriggerKey,Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Replaces the trigger.
 
-             </summary>
 
-             <param name="triggerKey">The <see cref="T:Quartz.TriggerKey"/> of the <see cref="T:Quartz.ITrigger"/> to be replaced.</param>
 
-             <param name="newTrigger">The new trigger.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.RetrieveJob(Quartz.JobKey)">
 
-             <summary>
 
-             Retrieve the <see cref="T:Quartz.IJobDetail"/> for the given
 
-             <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-             <returns>
 
-             The desired <see cref="T:Quartz.IJob"/>, or null if there is no match.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.RetrieveTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Retrieve the given <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <returns>
 
-             The desired <see cref="T:Quartz.ITrigger"/>, or null if there is no match.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.CalendarExists(System.String)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.ICalendar"/> with the given identifier already
 
-             exists within the scheduler.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="calName">the identifier to check for</param>
 
-             <returns>true if a calendar exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.CheckExists(Quartz.JobKey)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.IJob"/> with the given identifier already 
 
-             exists within the scheduler.
 
-             </summary>
 
-             <param name="jobKey">the identifier to check for</param>
 
-             <returns>true if a Job exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.CheckExists(Quartz.TriggerKey)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.ITrigger"/> with the given identifier already 
 
-             exists within the scheduler.
 
-             </summary>
 
-             <param name="triggerKey">triggerKey the identifier to check for</param>
 
-             <returns>true if a Trigger exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetTriggerState(Quartz.TriggerKey)">
 
-             <summary>
 
-             Get the current state of the identified <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <seealso cref="F:Quartz.TriggerState.Normal"/>
 
-             <seealso cref="F:Quartz.TriggerState.Paused"/>
 
-             <seealso cref="F:Quartz.TriggerState.Complete"/>
 
-             <seealso cref="F:Quartz.TriggerState.Error"/>
 
-             <seealso cref="F:Quartz.TriggerState.Blocked"/>
 
-             <seealso cref="F:Quartz.TriggerState.None"/>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.StoreCalendar(System.String,Quartz.ICalendar,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.ICalendar"/>.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="calendar">The <see cref="T:Quartz.ICalendar"/> to be stored.</param>
 
-             <param name="replaceExisting">If <see langword="true"/>, any <see cref="T:Quartz.ICalendar"/> existing
 
-             in the <see cref="T:Quartz.Spi.IJobStore"/> with the same name and group
 
-             should be over-written.</param>
 
-             <param name="updateTriggers">If <see langword="true"/>, any <see cref="T:Quartz.ITrigger"/>s existing
 
-             in the <see cref="T:Quartz.Spi.IJobStore"/> that reference an existing
 
-             Calendar with the same name with have their next fire time
 
-             re-computed with the new <see cref="T:Quartz.ICalendar"/>.</param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.RemoveCalendar(System.String)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.ICalendar"/> with the
 
-             given name.
 
-             <para>
 
-             If removal of the <see cref="T:Quartz.ICalendar"/> would result in
 
-             <see cref="T:Quartz.ITrigger"/>s pointing to non-existent calendars, then a
 
-             <see cref="T:Quartz.JobPersistenceException"/> will be thrown.</para>
 
-             </summary>
 
-             <param name="calName">The name of the <see cref="T:Quartz.ICalendar"/> to be removed.</param>
 
-             <returns>
 
-             	<see langword="true"/> if a <see cref="T:Quartz.ICalendar"/> with the given name
 
-             was found and removed from the store.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.RetrieveCalendar(System.String)">
 
-             <summary>
 
-             Retrieve the given <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <param name="calName">The name of the <see cref="T:Quartz.ICalendar"/> to be retrieved.</param>
 
-             <returns>
 
-             The desired <see cref="T:Quartz.ICalendar"/>, or null if there is no match.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetNumberOfJobs">
 
-             <summary>
 
-             Get the number of <see cref="T:Quartz.IJobDetail"/> s that are
 
-             stored in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetNumberOfTriggers">
 
-             <summary>
 
-             Get the number of <see cref="T:Quartz.ITrigger"/> s that are
 
-             stored in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetNumberOfCalendars">
 
-             <summary>
 
-             Get the number of <see cref="T:Quartz.ICalendar"/> s that are
 
-             stored in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetJobKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.IJob"/> s that
 
-             match the given group matcher.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetCalendarNames">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.ICalendar"/> s
 
-             in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             <para>
 
-             If there are no ICalendars in the given group name, the result should be
 
-             a zero-length array (not <see langword="null"/>).
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetTriggerKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.ITrigger"/> s
 
-             that have the given group name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetJobGroupNames">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.IJob"/>
 
-             groups.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetTriggerGroupNames">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.ITrigger"/> groups.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetTriggersForJob(Quartz.JobKey)">
 
-             <summary>
 
-             Get all of the Triggers that are associated to the given Job.
 
-             <para>
 
-             If there are no matches, a zero-length array should be returned.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetTriggerWrappersForJob(Quartz.JobKey)">
 
-             <summary>
 
-             Gets the trigger wrappers for job.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetTriggerWrappersForCalendar(System.String)">
 
-             <summary>
 
-             Gets the trigger wrappers for calendar.
 
-             </summary>
 
-             <param name="calName">Name of the cal.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.PauseTrigger(Quartz.TriggerKey)">
 
-             <summary> 
 
-             Pause the <see cref="T:Quartz.ITrigger"/> with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.ITrigger"/>s in the given group.
 
-             <para>
 
-             The JobStore should "remember" that the group is paused, and impose the
 
-             pause on any new triggers that are added to the group while the group is
 
-             paused.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.PauseJob(Quartz.JobKey)">
 
-             <summary> 
 
-             Pause the <see cref="T:Quartz.IJobDetail"/> with the given
 
-             name - by pausing all of its current <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.PauseJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.IJobDetail"/>s in the
 
-             given group - by pausing all of their <see cref="T:Quartz.ITrigger"/>s.
 
-             <para>
 
-             The JobStore should "remember" that the group is paused, and impose the
 
-             pause on any new jobs that are added to the group while the group is
 
-             paused.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.ResumeTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Resume (un-pause) the <see cref="T:Quartz.ITrigger"/> with the given key.
 
-             </summary>
 
-             <remarks>
 
-             If the <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Resume (un-pause) all of the <see cref="T:Quartz.ITrigger"/>s in the
 
-             given group.
 
-             <para>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.ResumeJob(Quartz.JobKey)">
 
-             <summary>
 
-             Resume (un-pause) the <see cref="T:Quartz.IJobDetail"/> with
 
-             the given name.
 
-             <para>
 
-             If any of the <see cref="T:Quartz.IJob"/>'s<see cref="T:Quartz.ITrigger"/> s missed one
 
-             or more fire-times, then the <see cref="T:Quartz.ITrigger"/>'s misfire
 
-             instruction will be applied.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.ResumeJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Resume (un-pause) all of the <see cref="T:Quartz.IJobDetail"/>s
 
-             in the given group.
 
-             <para>
 
-             If any of the <see cref="T:Quartz.IJob"/> s had <see cref="T:Quartz.ITrigger"/> s that
 
-             missed one or more fire-times, then the <see cref="T:Quartz.ITrigger"/>'s
 
-             misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.PauseAll">
 
-             <summary>
 
-             Pause all triggers - equivalent of calling <see cref="M:Quartz.Simpl.RAMJobStore.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             on every group.
 
-             <para>
 
-             When <see cref="M:Quartz.Simpl.RAMJobStore.ResumeAll"/> is called (to un-pause), trigger misfire
 
-             instructions WILL be applied.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="M:Quartz.Simpl.RAMJobStore.ResumeAll"/> 
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.ResumeAll">
 
-             <summary>
 
-             Resume (un-pause) all triggers - equivalent of calling <see cref="M:Quartz.Simpl.RAMJobStore.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             on every trigger group and setting all job groups unpaused />.
 
-             <para>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="M:Quartz.Simpl.RAMJobStore.PauseAll"/>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.ApplyMisfire(Quartz.Simpl.TriggerWrapper)">
 
-             <summary>
 
-             Applies the misfire.
 
-             </summary>
 
-             <param name="tw">The trigger wrapper.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.AcquireNextTriggers(System.DateTimeOffset,System.Int32,System.TimeSpan)">
 
-             <summary>
 
-             Get a handle to the next trigger to be fired, and mark it as 'reserved'
 
-             by the calling scheduler.
 
-             </summary>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.ReleaseAcquiredTrigger(Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> that the scheduler no longer plans to
 
-             fire the given <see cref="T:Quartz.ITrigger"/>, that it had previously acquired
 
-             (reserved).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.TriggersFired(System.Collections.Generic.IList{Quartz.Spi.IOperableTrigger})">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> that the scheduler is now firing the
 
-             given <see cref="T:Quartz.ITrigger"/> (executing its associated <see cref="T:Quartz.IJob"/>),
 
-             that it had previously acquired (reserved).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.TriggeredJobComplete(Quartz.Spi.IOperableTrigger,Quartz.IJobDetail,Quartz.SchedulerInstruction)">
 
-             <summary> 
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> that the scheduler has completed the
 
-             firing of the given <see cref="T:Quartz.ITrigger"/> (and the execution its
 
-             associated <see cref="T:Quartz.IJob"/>), and that the <see cref="T:Quartz.JobDataMap"/>
 
-             in the given <see cref="T:Quartz.IJobDetail"/> should be updated if the <see cref="T:Quartz.IJob"/>
 
-             is stateful.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.SetAllTriggersOfJobToState(Quartz.JobKey,Quartz.Simpl.InternalTriggerState)">
 
-             <summary>
 
-             Sets the state of all triggers of job to specified state.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.PeekTriggers">
 
-             <summary>
 
-             Peeks the triggers.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetPausedTriggerGroups">
 
-             <seealso cref="M:Quartz.Spi.IJobStore.GetPausedTriggerGroups"/>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RAMJobStore.MisfireThreshold">
 
-             <summary> 
 
-             The time span by which a trigger must have missed its
 
-             next-fire-time, in order for it to be considered "misfired" and thus
 
-             have its misfire instruction applied.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RAMJobStore.SupportsPersistence">
 
-             <summary>
 
-             Returns whether this instance supports persistence.
 
-             </summary>
 
-             <value></value>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RAMJobStore.InstanceId">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> of the Scheduler instance's Id, 
 
-             prior to initialize being invoked.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RAMJobStore.InstanceName">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> of the Scheduler instance's name, 
 
-             prior to initialize being invoked.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.TriggerWrapperComparator">
 
-             <summary>
 
-             Comparer for trigger wrappers.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.TriggerWrapperComparator.Equals(Quartz.Simpl.TriggerWrapperComparator)">
 
-             <summary>
 
-             Indicates whether the current object is equal to another object of the same type.
 
-             </summary>
 
-             <returns>
 
-             true if the current object is equal to the <paramref name="other"/> parameter; otherwise, false.
 
-             </returns>
 
-             <param name="other">An object to compare with this object.</param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.TriggerWrapperComparator.GetHashCode">
 
-             <summary>
 
-             Serves as a hash function for a particular type. 
 
-             </summary>
 
-             <returns>
 
-             A hash code for the current <see cref="T:System.Object"/>.
 
-             </returns>
 
-             <filterpriority>2</filterpriority>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.InternalTriggerState">
 
-             <summary>
 
-             Possible internal trigger states 
 
-             in RAMJobStore
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.InternalTriggerState.Waiting">
 
-             <summary>
 
-             Waiting 
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.InternalTriggerState.Acquired">
 
-             <summary>
 
-             Acquired
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.InternalTriggerState.Executing">
 
-             <summary>
 
-             Executing
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.InternalTriggerState.Complete">
 
-             <summary>
 
-             Complete
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.InternalTriggerState.Paused">
 
-             <summary>
 
-             Paused
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.InternalTriggerState.Blocked">
 
-             <summary>
 
-             Blocked
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.InternalTriggerState.PausedAndBlocked">
 
-             <summary>
 
-             Paused and Blocked
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.InternalTriggerState.Error">
 
-             <summary>
 
-             Error
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.TriggerWrapper">
 
-             <summary>
 
-             Helper wrapper class
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.TriggerWrapper.key">
 
-             <summary>
 
-             The key used
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.TriggerWrapper.jobKey">
 
-             <summary>
 
-             Job's key
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.TriggerWrapper.trigger">
 
-             <summary>
 
-             The trigger
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.TriggerWrapper.state">
 
-             <summary>
 
-             Current state
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.TriggerWrapper.Equals(System.Object)">
 
-             <summary>
 
-             Determines whether the specified <see cref="T:System.Object"></see> is equal to the current <see cref="T:System.Object"></see>.
 
-             </summary>
 
-             <param name="obj">The <see cref="T:System.Object"></see> to compare with the current <see cref="T:System.Object"></see>.</param>
 
-             <returns>
 
-             true if the specified <see cref="T:System.Object"></see> is equal to the current <see cref="T:System.Object"></see>; otherwise, false.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.TriggerWrapper.GetHashCode">
 
-             <summary>
 
-             Serves as a hash function for a particular type. <see cref="M:System.Object.GetHashCode"></see> is suitable for use in hashing algorithms and data structures like a hash table.
 
-             </summary>
 
-             <returns>
 
-             A hash code for the current <see cref="T:System.Object"></see>.
 
-             </returns>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.RemotingSchedulerExporter">
 
-             <summary>
 
-             Scheduler exporter that exports scheduler to remoting context.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="T:Quartz.Spi.ISchedulerExporter">
 
-             <summary>
 
-             Service interface for scheduler exporters.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ISchedulerExporter.Bind(Quartz.Simpl.IRemotableQuartzScheduler)">
 
-             <summary>
 
-             Binds (exports) scheduler to external context.
 
-             </summary>
 
-             <param name="scheduler"></param>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ISchedulerExporter.UnBind(Quartz.Simpl.IRemotableQuartzScheduler)">
 
-             <summary>
 
-             Unbinds scheduler from external context.
 
-             </summary>
 
-             <param name="scheduler"></param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RemotingSchedulerExporter.RegisterRemotingChannelIfNeeded">
 
-             <summary>
 
-             Registers remoting channel if needed. This is determined
 
-             by checking whether there is a positive value for port.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RemotingSchedulerExporter.Port">
 
-             <summary>
 
-             Gets or sets the port used for remoting.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RemotingSchedulerExporter.BindName">
 
-             <summary>
 
-             Gets or sets the name to use when exporting
 
-             scheduler to remoting context.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RemotingSchedulerExporter.ChannelName">
 
-             <summary>
 
-             Gets or sets the name to use when binding to 
 
-             tcp channel.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RemotingSchedulerExporter.ChannelType">
 
-             <summary>
 
-             Sets the channel type when registering remoting.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RemotingSchedulerExporter.TypeFilterLevel">
 
-             <summary>
 
-             Sets the <see cref="P:Quartz.Simpl.RemotingSchedulerExporter.TypeFilterLevel"/> used when
 
-             exporting to remoting context. Defaults to
 
-             <see cref="F:System.Runtime.Serialization.Formatters.TypeFilterLevel.Full"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RemotingSchedulerExporter.RejectRemoteRequests">
 
-             <summary>
 
-             A Boolean value (true or false) that specifies whether to refuse requests from other computers. 
 
-             Specifying true allows only remoting calls from the local computer. The default is false.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.RemotingSchedulerProxyFactory">
 
-             <summary>
 
-             A <see cref="T:Quartz.Spi.IRemotableSchedulerProxyFactory"/> implementation that creates
 
-             connection to remote scheduler using remoting.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Spi.IRemotableSchedulerProxyFactory">
 
-             <summary>
 
-             Client Proxy to a IRemotableQuartzScheduler
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IRemotableSchedulerProxyFactory.GetProxy">
 
-             <summary>
 
-             Returns a client proxy to a remote <see cref="T:Quartz.Simpl.IRemotableQuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RemotingSchedulerProxyFactory.GetProxy">
 
-             <summary>
 
-             Returns a client proxy to a remote <see cref="T:Quartz.Simpl.IRemotableQuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RemotingSchedulerProxyFactory.Address">
 
-             <summary>
 
-             Gets or sets the remote scheduler address.
 
-             </summary>
 
-             <value>The remote scheduler address.</value>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.SimpleInstanceIdGenerator">
 
-             <summary> 
 
-             The default InstanceIdGenerator used by Quartz when instance id is to be
 
-             automatically generated.  Instance id is of the form HOSTNAME + CURRENT_TIME.
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-             <seealso cref="T:Quartz.Spi.IInstanceIdGenerator"/>
 
-             <seealso cref="T:Quartz.Simpl.HostnameInstanceIdGenerator"/>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleInstanceIdGenerator.GenerateInstanceId">
 
-             <summary>
 
-             Generate the instance id for a <see cref="T:Quartz.IScheduler"/>
 
-             </summary>
 
-             <returns>The clusterwide unique instance id.</returns>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.SimpleThreadPool">
 
-             <summary>
 
-             This is class is a simple implementation of a thread pool, based on the
 
-             <see cref="T:Quartz.Spi.IThreadPool"/> interface.
 
-             </summary>
 
-             <remarks>
 
-             <see cref="T:Quartz.IThreadRunnable"/> objects are sent to the pool with the <see cref="M:Quartz.Simpl.SimpleThreadPool.RunInThread(Quartz.IThreadRunnable)"/>
 
-             method, which blocks until a <see cref="T:System.Threading.Thread"/> becomes available.
 
-             
 
-             The pool has a fixed number of <see cref="T:System.Threading.Thread"/>s, and does not grow or
 
-             shrink based on demand.
 
-             </remarks>
 
-             <author>James House</author>
 
-             <author>Juergen Donnerstag</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Spi.IThreadPool">
 
-             <summary>
 
-             The interface to be implemented by classes that want to provide a thread
 
-             pool for the <see cref="T:Quartz.IScheduler"/>'s use.
 
-             </summary>
 
-             <remarks>
 
-             <see cref="T:Quartz.Spi.IThreadPool"/> implementation instances should ideally be made
 
-             for the sole use of Quartz.  Most importantly, when the method
 
-              <see cref="M:Quartz.Spi.IThreadPool.BlockForAvailableThreads"/> returns a value of 1 or greater,
 
-             there must still be at least one available thread in the pool when the
 
-             method  <see cref="M:Quartz.Spi.IThreadPool.RunInThread(Quartz.IThreadRunnable)"/> is called a few moments (or
 
-             many moments) later.  If this assumption does not hold true, it may
 
-             result in extra JobStore queries and updates, and if clustering features
 
-             are being used, it may result in greater imballance of load.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.Core.QuartzScheduler"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IThreadPool.RunInThread(Quartz.IThreadRunnable)">
 
-             <summary>
 
-             Execute the given <see cref="T:Quartz.IThreadRunnable"/> in the next
 
-             available <see cref="T:System.Threading.Thread"/>.
 
-             </summary>
 
-             <remarks>
 
-             The implementation of this interface should not throw exceptions unless
 
-             there is a serious problem (i.e. a serious misconfiguration). If there
 
-             are no available threads, rather it should either queue the Runnable, or
 
-             block until a thread is available, depending on the desired strategy.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IThreadPool.BlockForAvailableThreads">
 
-              <summary>
 
-              Determines the number of threads that are currently available in in
 
-              the pool.  Useful for determining the number of times
 
-              <see cref="M:Quartz.Spi.IThreadPool.RunInThread(Quartz.IThreadRunnable)"/>  can be called before returning
 
-              false.
 
-              </summary>
 
-             <remarks>
 
-              The implementation of this method should block until there is at
 
-              least one available thread.
 
-             </remarks>
 
-              <returns>the number of currently available threads</returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IThreadPool.Initialize">
 
-             <summary>
 
-             Must be called before the <see cref="T:System.Threading.ThreadPool"/> is
 
-             used, in order to give the it a chance to Initialize.
 
-             </summary>
 
-             <remarks>
 
-             Typically called by the <see cref="T:Quartz.ISchedulerFactory"/>.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IThreadPool.Shutdown(System.Boolean)">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the <see cref="T:System.Threading.ThreadPool"/>
 
-             that it should free up all of it's resources because the scheduler is
 
-             shutting down.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IThreadPool.PoolSize">
 
-             <summary>
 
-             Get the current number of threads in the <see cref="T:Quartz.Spi.IThreadPool"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IThreadPool.InstanceId">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IThreadPool"/> of the Scheduler instance's Id, 
 
-             prior to initialize being invoked.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IThreadPool.InstanceName">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IThreadPool"/> of the Scheduler instance's name, 
 
-             prior to initialize being invoked.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.#ctor">
 
-             <summary> 
 
-             Create a new (unconfigured) <see cref="T:Quartz.Simpl.SimpleThreadPool"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.#ctor(System.Int32,System.Threading.ThreadPriority)">
 
-             <summary>
 
-             Create a new <see cref="T:Quartz.Simpl.SimpleThreadPool"/> with the specified number
 
-             of <see cref="T:System.Threading.Thread"/> s that have the given priority.
 
-             </summary>
 
-             <param name="threadCount">
 
-             the number of worker <see cref="T:System.Threading.Thread"/>s in the pool, must
 
-             be > 0.
 
-             </param>
 
-             <param name="threadPriority">
 
-             the thread priority for the worker threads.
 
-             
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.Initialize">
 
-             <summary>
 
-             Called by the QuartzScheduler before the <see cref="T:System.Threading.ThreadPool"/> is
 
-             used, in order to give the it a chance to Initialize.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.Shutdown(System.Boolean)">
 
-             <summary>
 
-             Terminate any worker threads in this thread group.
 
-             Jobs currently in progress will complete.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.RunInThread(Quartz.IThreadRunnable)">
 
-             <summary>
 
-             Run the given <see cref="T:Quartz.IThreadRunnable"/> object in the next available
 
-             <see cref="T:System.Threading.Thread"/>. If while waiting the thread pool is asked to
 
-             shut down, the Runnable is executed immediately within a new additional
 
-             thread.
 
-             </summary>
 
-             <param name="runnable">The <see cref="T:Quartz.IThreadRunnable"/> to be added.</param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.CreateWorkerThreads(System.Int32)">
 
-             <summary>
 
-             Creates the worker threads.
 
-             </summary>
 
-             <param name="threadCount">The thread count.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.Shutdown">
 
-             <summary>
 
-             Terminate any worker threads in this thread group.
 
-             Jobs currently in progress will complete.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.SimpleThreadPool.ThreadCount">
 
-             <summary>
 
-             Gets or sets the number of worker threads in the pool.
 
-             Set  has no effect after <see cref="M:Quartz.Simpl.SimpleThreadPool.Initialize"/> has been called.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.SimpleThreadPool.ThreadPriority">
 
-             <summary>
 
-             Get or set the thread priority of worker threads in the pool.
 
-             Set operation has no effect after <see cref="M:Quartz.Simpl.SimpleThreadPool.Initialize"/> has been called.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.SimpleThreadPool.ThreadNamePrefix">
 
-             <summary>
 
-             Gets or sets the thread name prefix.
 
-             </summary>
 
-             <value>The thread name prefix.</value>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.SimpleThreadPool.MakeThreadsDaemons">
 
-             <summary> 
 
-             Gets or sets the value of makeThreadsDaemons.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.SimpleThreadPool.PoolSize">
 
-             <summary>
 
-             Gets the size of the pool.
 
-             </summary>
 
-             <value>The size of the pool.</value>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.SimpleThreadPool.InstanceId">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IThreadPool"/> of the Scheduler instance's Id, 
 
-             prior to initialize being invoked.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.SimpleThreadPool.InstanceName">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IThreadPool"/> of the Scheduler instance's name, 
 
-             prior to initialize being invoked.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.SimpleThreadPool.WorkerThread">
 
-             <summary>
 
-             A Worker loops, waiting to Execute tasks.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.WorkerThread.#ctor(Quartz.Simpl.SimpleThreadPool,System.String,System.Threading.ThreadPriority,System.Boolean)">
 
-             <summary>
 
-             Create a worker thread and start it. Waiting for the next Runnable,
 
-             executing it, and waiting for the next Runnable, until the Shutdown
 
-             flag is set.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.WorkerThread.#ctor(Quartz.Simpl.SimpleThreadPool,System.String,System.Threading.ThreadPriority,System.Boolean,Quartz.IThreadRunnable)">
 
-             <summary>
 
-             Create a worker thread, start it, Execute the runnable and terminate
 
-             the thread (one time execution).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.WorkerThread.Shutdown">
 
-             <summary>
 
-             Signal the thread that it should terminate.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.WorkerThread.Run">
 
-             <summary>
 
-             Loop, executing targets as they are received.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.SimpleTypeLoadHelper">
 
-             <summary> 
 
-             A <see cref="T:Quartz.Spi.ITypeLoadHelper"/> that simply calls <see cref="M:System.Type.GetType(System.String)"/>.
 
-             </summary>
 
-             <seealso cref="T:Quartz.Spi.ITypeLoadHelper"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleTypeLoadHelper.Initialize">
 
-             <summary> 
 
-             Called to give the ClassLoadHelper a chance to Initialize itself,
 
-             including the oportunity to "steal" the class loader off of the calling
 
-             thread, which is the thread that is initializing Quartz.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleTypeLoadHelper.LoadType(System.String)">
 
-             <summary> Return the class with the given name.</summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleTypeLoadHelper.GetResource(System.String)">
 
-             <summary>
 
-             Finds a resource with a given name. This method returns null if no
 
-             resource with this name is found.
 
-             </summary>
 
-             <param name="name">name of the desired resource
 
-             </param>
 
-             <returns> a Uri object</returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleTypeLoadHelper.GetResourceAsStream(System.String)">
 
-             <summary>
 
-             Finds a resource with a given name. This method returns null if no
 
-             resource with this name is found.
 
-             </summary>
 
-             <param name="name">name of the desired resource
 
-             </param>
 
-             <returns> a Stream object
 
-             </returns>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.SystemPropertyInstanceIdGenerator">
 
-             <summary>
 
-             InstanceIdGenerator that will use a <see cref="F:Quartz.Simpl.SystemPropertyInstanceIdGenerator.SystemProperty"/> to configure the scheduler.
 
-             If no value set for the property, a <see cref="T:Quartz.SchedulerException"/> is thrown.
 
-             <author>Alex Snaps</author>
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.SystemPropertyInstanceIdGenerator.SystemProperty">
 
-             <summary>
 
-             System property to read the instanceId from.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SystemPropertyInstanceIdGenerator.GenerateInstanceId">
 
-             <summary>
 
-             Returns the cluster wide value for this scheduler instance's id, based on a system property.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.SystemPropertyInstanceIdGenerator.Prepend">
 
-             <summary>
 
-             A string of text to prepend (add to the beginning) to the instanceId found in the system property.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.SystemPropertyInstanceIdGenerator.Postpend">
 
-             <summary>
 
-             A string of text to postpend (add to the end) to the instanceId found in the system property.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.SystemPropertyInstanceIdGenerator.SystemPropertyName">
 
-             <summary>
 
-             The name of the system property from which to obtain the instanceId.
 
-             </summary>
 
-             <remarks>
 
-             Defaults to <see cref="F:Quartz.Simpl.SystemPropertyInstanceIdGenerator.SystemProperty"/>.
 
-             </remarks>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.ZeroSizeThreadPool">
 
-             <summary>
 
-             This is class is a simple implementation of a zero size thread pool, based on the
 
-             <see cref="T:Quartz.Spi.IThreadPool"/> interface.
 
-             </summary>
 
-             <remarks>
 
-             The pool has zero <see cref="T:System.Threading.Thread"/>s and does not grow or shrink based on demand.
 
-             Which means it is obviously not useful for most scenarios.  When it may be useful
 
-             is to prevent creating any worker threads at all - which may be desirable for
 
-             the sole purpose of preserving system resources in the case where the scheduler
 
-             instance only exists in order to schedule jobs, but which will never execute
 
-             jobs (e.g. will never have Start() called on it).
 
-             </remarks>
 
-             <author>Wayne Fay</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.ZeroSizeThreadPool.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Simpl.ZeroSizeThreadPool"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.ZeroSizeThreadPool.Initialize">
 
-             <summary>
 
-             Called by the QuartzScheduler before the <see cref="T:System.Threading.ThreadPool"/> is
 
-             used, in order to give the it a chance to Initialize.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.ZeroSizeThreadPool.Shutdown">
 
-             <summary>
 
-             Shutdowns this instance.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.ZeroSizeThreadPool.Shutdown(System.Boolean)">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the <see cref="T:System.Threading.ThreadPool"/>
 
-             that it should free up all of it's resources because the scheduler is
 
-             shutting down.
 
-             </summary>
 
-             <param name="waitForJobsToComplete"></param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.ZeroSizeThreadPool.RunInThread(Quartz.IThreadRunnable)">
 
-             <summary>
 
-             Execute the given <see cref="T:Quartz.IThreadRunnable"/> in the next
 
-             available <see cref="T:System.Threading.Thread"/>.
 
-             </summary>
 
-             <param name="runnable"></param>
 
-             <returns></returns>
 
-             <remarks>
 
-             The implementation of this interface should not throw exceptions unless
 
-             there is a serious problem (i.e. a serious misconfiguration). If there
 
-             are no available threads, rather it should either queue the Runnable, or
 
-             block until a thread is available, depending on the desired strategy.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.ZeroSizeThreadPool.BlockForAvailableThreads">
 
-             <summary>
 
-             Determines the number of threads that are currently available in in
 
-             the pool.  Useful for determining the number of times
 
-             <see cref="M:Quartz.Simpl.ZeroSizeThreadPool.RunInThread(Quartz.IThreadRunnable)"/>  can be called before returning
 
-             false.
 
-             </summary>
 
-             <returns>
 
-             the number of currently available threads
 
-             </returns>
 
-             <remarks>
 
-             The implementation of this method should block until there is at
 
-             least one available thread.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.ZeroSizeThreadPool.Log">
 
-             <summary>
 
-             Gets the log.
 
-             </summary>
 
-             <value>The log.</value>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.ZeroSizeThreadPool.PoolSize">
 
-             <summary>
 
-             Gets the size of the pool.
 
-             </summary>
 
-             <value>The size of the pool.</value>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.ZeroSizeThreadPool.InstanceId">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IThreadPool"/> of the Scheduler instance's Id, 
 
-             prior to initialize being invoked.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.ZeroSizeThreadPool.InstanceName">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IThreadPool"/> of the Scheduler instance's name, 
 
-             prior to initialize being invoked.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Spi.TriggerFiredBundle">
 
-             <summary>
 
-             A simple class (structure) used for returning execution-time data from the
 
-             JobStore to the <see cref="T:Quartz.Core.QuartzSchedulerThread"/>.
 
-             </summary>
 
-             <seealso cref="T:Quartz.Core.QuartzScheduler"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Spi.TriggerFiredBundle.#ctor(Quartz.IJobDetail,Quartz.Spi.IOperableTrigger,Quartz.ICalendar,System.Boolean,System.Nullable{System.DateTimeOffset},System.Nullable{System.DateTimeOffset},System.Nullable{System.DateTimeOffset},System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Spi.TriggerFiredBundle"/> class.
 
-             </summary>
 
-             <param name="job">The job.</param>
 
-             <param name="trigger">The trigger.</param>
 
-             <param name="cal">The calendar.</param>
 
-             <param name="jobIsRecovering">if set to <c>true</c> [job is recovering].</param>
 
-             <param name="fireTimeUtc">The fire time.</param>
 
-             <param name="scheduledFireTimeUtc">The scheduled fire time.</param>
 
-             <param name="prevFireTimeUtc">The previous fire time.</param>
 
-             <param name="nextFireTimeUtc">The next fire time.</param>
 
-         </member>
 
-         <member name="P:Quartz.Spi.TriggerFiredBundle.JobDetail">
 
-             <summary>
 
-             Gets the job detail.
 
-             </summary>
 
-             <value>The job detail.</value>
 
-         </member>
 
-         <member name="P:Quartz.Spi.TriggerFiredBundle.Trigger">
 
-             <summary>
 
-             Gets the trigger.
 
-             </summary>
 
-             <value>The trigger.</value>
 
-         </member>
 
-         <member name="P:Quartz.Spi.TriggerFiredBundle.Calendar">
 
-             <summary>
 
-             Gets the calendar.
 
-             </summary>
 
-             <value>The calendar.</value>
 
-         </member>
 
-         <member name="P:Quartz.Spi.TriggerFiredBundle.Recovering">
 
-             <summary>
 
-             Gets a value indicating whether this <see cref="T:Quartz.Spi.TriggerFiredBundle"/> is recovering.
 
-             </summary>
 
-             <value><c>true</c> if recovering; otherwise, <c>false</c>.</value>
 
-         </member>
 
-         <member name="P:Quartz.Spi.TriggerFiredBundle.FireTimeUtc">
 
-             <returns> 
 
-             Returns the UTC fire time.
 
-             </returns>
 
-         </member>
 
-         <member name="P:Quartz.Spi.TriggerFiredBundle.NextFireTimeUtc">
 
-             <summary>
 
-             Gets the next UTC fire time.
 
-             </summary>
 
-             <value>The next fire time.</value>
 
-             <returns> Returns the nextFireTimeUtc.</returns>
 
-         </member>
 
-         <member name="P:Quartz.Spi.TriggerFiredBundle.PrevFireTimeUtc">
 
-             <summary>
 
-             Gets the previous UTC fire time.
 
-             </summary>
 
-             <value>The previous fire time.</value>
 
-             <returns> Returns the previous fire time. </returns>
 
-         </member>
 
-         <member name="P:Quartz.Spi.TriggerFiredBundle.ScheduledFireTimeUtc">
 
-             <returns> 
 
-             Returns the scheduled UTC fire time.
 
-             </returns>
 
-         </member>
 
-         <member name="T:Quartz.Spi.TriggerFiredResult">
 
-             <summary>
 
-             Result holder for trigger firing event.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.TriggerFiredResult.#ctor(Quartz.Spi.TriggerFiredBundle)">
 
-             <summary>
 
-              Constructor.
 
-             </summary>
 
-             <param name="triggerFiredBundle"></param>
 
-         </member>
 
-         <member name="M:Quartz.Spi.TriggerFiredResult.#ctor(System.Exception)">
 
-             <summary>
 
-              Constructor.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.TriggerFiredResult.TriggerFiredBundle">
 
-             <summary>
 
-              Bundle.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.TriggerFiredResult.Exception">
 
-             <summary>
 
-             Possible exception.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Util.DictionaryExtensions">
 
-             <summary>
 
-             Extension methods for <see cref="T:System.Collections.Generic.IDictionary`2"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DictionaryExtensions.TryGetAndReturn``2(System.Collections.Generic.IDictionary{``0,``1},``0)">
 
-             <summary>
 
-             Tries to read value and returns the value if successfully read. Otherwise return default value
 
-             for value's type.
 
-             </summary>
 
-             <typeparam name="TKey"></typeparam>
 
-             <typeparam name="TValue"></typeparam>
 
-             <param name="dictionary"></param>
 
-             <param name="key"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Util.DataReaderExtensions">
 
-             <summary>
 
-             Extension methods for simplified <see cref="T:System.Data.IDataReader"/> access.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DataReaderExtensions.GetString(System.Data.IDataReader,System.String)">
 
-             <summary>
 
-             Returns string from given column name, or null if DbNull.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DataReaderExtensions.GetInt32(System.Data.IDataReader,System.String)">
 
-             <summary>
 
-             Returns int from given column name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DataReaderExtensions.GetInt64(System.Data.IDataReader,System.String)">
 
-             <summary>
 
-             Returns long from given column name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DataReaderExtensions.GetNullableInt64(System.Data.IDataReader,System.String)">
 
-             <summary>
 
-             Returns long from given column name, or null if DbNull.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DataReaderExtensions.GetDecimal(System.Data.IDataReader,System.String)">
 
-             <summary>
 
-             Returns decimal from given column name.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Util.DBConnectionManager">
 
-             <summary>
 
-             Manages a collection of IDbProviders, and provides transparent access
 
-             to their database.
 
-             </summary>
 
-             <seealso cref="T:Quartz.Impl.AdoJobStore.Common.IDbProvider"/>
 
-             <author>James House</author>
 
-             <author>Sharada Jambula</author>
 
-             <author>Mohammad Rezaei</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Util.IDbConnectionManager">
 
-             <summary>
 
-             Manages a collection of IDbProviders, and provides transparent access
 
-             to their database.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.IDbConnectionManager.Shutdown(System.String)">
 
-             <summary> 
 
-             Shuts down database connections from the data source with the given name,
 
-             if applicable for the underlying provider.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.IDbConnectionManager.GetConnection(System.String)">
 
-             <summary>
 
-             Get a database connection from the data source with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.IDbConnectionManager.GetDbMetadata(System.String)">
 
-             <summary>
 
-             Returns meta data for data source with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.IDbConnectionManager.GetDbProvider(System.String)">
 
-             <summary>
 
-             Gets db provider for data source with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.IDbConnectionManager.AddConnectionProvider(System.String,Quartz.Impl.AdoJobStore.Common.IDbProvider)">
 
-             <summary>
 
-             Adds a connection provider to data source with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DBConnectionManager.#ctor">
 
-             <summary> 
 
-             Private constructor
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DBConnectionManager.AddConnectionProvider(System.String,Quartz.Impl.AdoJobStore.Common.IDbProvider)">
 
-             <summary>
 
-             Adds the connection provider.
 
-             </summary>
 
-             <param name="dataSourceName">Name of the data source.</param>
 
-             <param name="provider">The provider.</param>
 
-         </member>
 
-         <member name="M:Quartz.Util.DBConnectionManager.GetConnection(System.String)">
 
-             <summary>
 
-             Get a database connection from the DataSource with the given name.
 
-             </summary>
 
-             <returns> a database connection </returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.DBConnectionManager.Shutdown(System.String)">
 
-             <summary> 
 
-             Shuts down database connections from the DataSource with the given name,
 
-             if applicable for the underlying provider.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DBConnectionManager.GetDbProvider(System.String)">
 
-             <summary>
 
-             Gets the db provider.
 
-             </summary>
 
-             <param name="dsName">Name of the ds.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Util.DBConnectionManager.Instance">
 
-             <summary> 
 
-             Get the class instance.
 
-             </summary>
 
-             <returns> an instance of this class
 
-             </returns>
 
-         </member>
 
-         <member name="T:Quartz.Util.DirtyFlagMap`2">
 
-             <summary>
 
-             An implementation of <see cref="T:System.Collections.IDictionary"/> that wraps another <see cref="T:System.Collections.IDictionary"/>
 
-             and flags itself 'dirty' when it is modified.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.#ctor">
 
-             <summary>
 
-             Create a DirtyFlagMap that 'wraps' a <see cref="T:System.Collections.Hashtable"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.#ctor(System.Int32)">
 
-             <summary>
 
-             Create a DirtyFlagMap that 'wraps' a <see cref="T:System.Collections.Hashtable"/> that has the
 
-             given initial capacity.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.Clone">
 
-             <summary>
 
-             Creates a new object that is a copy of the current instance.
 
-             </summary>
 
-             <returns>
 
-             A new object that is a copy of this instance.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.Get(`0)">
 
-             <summary>
 
-             Gets the value behind the specified key.
 
-             </summary>
 
-             <param name="key">The key.</param>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.Clear">
 
-             <summary>
 
-             When implemented by a class, removes all elements from the <see cref="T:System.Collections.IDictionary"/>.
 
-             </summary>
 
-             <exception cref="T:System.NotSupportedException">
 
-             The <see cref="T:System.Collections.IDictionary"/> is read-only.
 
-             </exception>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.ContainsKey(`0)">
 
-             <summary>
 
-             When implemented by a class, determines whether the <see cref="T:System.Collections.IDictionary"/> contains an element with the specified key.
 
-             </summary>
 
-             <param name="key">The key to locate in the <see cref="T:System.Collections.IDictionary"/>.</param>
 
-             <returns>
 
-             	<see langword="true"/> if the <see cref="T:System.Collections.IDictionary"/> contains an element with the key; otherwise, <see langword="false"/>.
 
-             </returns>
 
-             <exception cref="T:System.ArgumentNullException">
 
-             	<paramref name="key "/>is <see langword="null"/>.</exception>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.Remove(`0)">
 
-             <summary>
 
-             When implemented by a class, removes the element with the
 
-             specified key from the <see cref="T:System.Collections.IDictionary"/>.
 
-             </summary>
 
-             <param name="key">The key of the element to remove.</param>
 
-             <exception cref="T:System.ArgumentNullException">
 
-             	<paramref name="key "/> is <see langword="null"/>.</exception>
 
-             <exception cref="T:System.NotSupportedException">
 
-             	<para>The <see cref="T:System.Collections.IDictionary"/> is read-only.</para>
 
-             	<para>-or-</para>
 
-             	<para>The <see cref="T:System.Collections.IDictionary"/> has a fixed size.</para>
 
-             </exception>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.GetEnumerator">
 
-             <summary>
 
-             When implemented by a class, returns an
 
-             <see cref="T:System.Collections.IDictionaryEnumerator"/> for the <see cref="T:System.Collections.IDictionary"/>.
 
-             </summary>
 
-             <returns>
 
-             An <see cref="T:System.Collections.IDictionaryEnumerator"/> for the <see cref="T:System.Collections.IDictionary"/>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.Add(`0,`1)">
 
-             <summary>
 
-             When implemented by a class, adds an element with the provided key and value to the <see cref="T:System.Collections.IDictionary"/>.
 
-             </summary>
 
-             <param name="key">The <see cref="T:System.Object"/> to use as the key of the element to add.</param>
 
-             <param name="value">The <see cref="T:System.Object"/> to use as the value of the element to add.</param>
 
-             <exception cref="T:System.ArgumentNullException"><paramref name="key"/> is <see langword="null"/>.</exception>
 
-             <exception cref="T:System.ArgumentException">
 
-             An element with the same key already exists in the <see cref="T:System.Collections.IDictionary"/>.
 
-             </exception>
 
-             <exception cref="T:System.NotSupportedException">
 
-             	<para>The <see cref="T:System.Collections.IDictionary"/> is read-only.</para>
 
-             	<para>-or-</para>
 
-             	<para>The <see cref="T:System.Collections.IDictionary"/> has a fixed size.</para>
 
-             </exception>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.CopyTo(System.Array,System.Int32)">
 
-             <summary>
 
-             When implemented by a class, copies the elements of
 
-             the <see cref="T:System.Collections.ICollection"/> to an <see cref="T:System.Array"/>, starting at a particular <see cref="T:System.Array"/> index.
 
-             </summary>
 
-             <param name="array">The one-dimensional <see cref="T:System.Array"/> that is the destination of the elements copied from <see cref="T:System.Collections.ICollection"/>. The <see cref="T:System.Array"/> must have zero-based indexing.</param>
 
-             <param name="index">The zero-based index in <paramref name="array"/> at which copying begins.</param>
 
-             <exception cref="T:System.ArgumentNullException">
 
-             	<paramref name="array"/> is <see langword="null"/>.</exception>
 
-             <exception cref="T:System.ArgumentOutOfRangeException">
 
-             	<paramref name="index"/> is less than zero.</exception>
 
-             <exception cref="T:System.ArgumentException">
 
-             	<para>
 
-             		<paramref name="array"/> is multidimensional.</para>
 
-             	<para>-or-</para>
 
-             	<para>
 
-             		<paramref name="index"/> is equal to or greater than the length of <paramref name="array"/>.</para>
 
-             	<para>-or-</para>
 
-             	<para>The number of elements in the source <see cref="T:System.Collections.ICollection"/> is greater than the available space from <paramref name="index"/> to the end of the destination <paramref name="array"/>.</para>
 
-             </exception>
 
-             <exception cref="T:System.InvalidCastException">The type of the source <see cref="T:System.Collections.ICollection"/> cannot be cast automatically to the type of the destination <paramref name="array"/>.</exception>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.ClearDirtyFlag">
 
-             <summary>
 
-             Clear the 'dirty' flag (set dirty flag to <see langword="false" />).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.ContainsValue(`1)">
 
-             <summary>
 
-             Determines whether the specified obj contains value.
 
-             </summary>
 
-             <param name="obj">The obj.</param>
 
-             <returns>
 
-             	<c>true</c> if the specified obj contains value; otherwise, <c>false</c>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.EntrySet">
 
-             <summary>
 
-             Gets the entries as a set.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.Equals(System.Object)">
 
-             <summary>
 
-             Determines whether the specified <see cref="T:System.Object"/> is equal to the current <see cref="T:System.Object"/>.
 
-             </summary>
 
-             <param name="obj">The <see cref="T:System.Object"/> to compare with the current <see cref="T:System.Object"/>.</param>
 
-             <returns>
 
-             	<see langword="true"/> if the specified <see cref="T:System.Object"/> is equal to the
 
-             current <see cref="T:System.Object"/>; otherwise, <see langword="false"/>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.GetHashCode">
 
-             <summary>
 
-             Serves as a hash function for a particular type, suitable
 
-             for use in hashing algorithms and data structures like a hash table.
 
-             </summary>
 
-             <returns>
 
-             A hash code for the current <see cref="T:System.Object"/>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.KeySet">
 
-             <summary>
 
-             Gets keyset for this map.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.Put(`0,`1)">
 
-             <summary>
 
-             Puts the value behind a specified key.
 
-             </summary>
 
-             <param name="key">The key.</param>
 
-             <param name="val">The val.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.PutAll(System.Collections.Generic.IDictionary{`0,`1})">
 
-             <summary>
 
-             Puts all.
 
-             </summary>
 
-             <param name="t">The t.</param>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.Dirty">
 
-             <summary>
 
-             Determine whether the <see cref="T:System.Collections.IDictionary"/> is flagged dirty.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.WrappedMap">
 
-             <summary>
 
-             Get a direct handle to the underlying Map.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.IsEmpty">
 
-             <summary>
 
-             Gets a value indicating whether this instance is empty.
 
-             </summary>
 
-             <value><c>true</c> if this instance is empty; otherwise, <c>false</c>.</value>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.Item(`0)">
 
-             <summary>
 
-             Gets or sets the <see cref="T:System.Object"/> with the specified key.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.Count">
 
-             <summary>
 
-             When implemented by a class, gets the number of
 
-             elements contained in the <see cref="T:System.Collections.ICollection"/>.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.Values">
 
-             <summary>
 
-             When implemented by a class, gets an <see cref="T:System.Collections.ICollection"/> containing the values in the <see cref="T:System.Collections.IDictionary"/>.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.Keys">
 
-             <summary>
 
-             When implemented by a class, gets an <see cref="T:System.Collections.ICollection"/> containing the keys of the <see cref="T:System.Collections.IDictionary"/>.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.IsReadOnly">
 
-             <summary>
 
-             When implemented by a class, gets a value indicating whether the <see cref="T:System.Collections.IDictionary"/>
 
-             is read-only.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.IsFixedSize">
 
-             <summary>
 
-             When implemented by a class, gets a value indicating whether the <see cref="T:System.Collections.IDictionary"/>
 
-             has a fixed size.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.SyncRoot">
 
-             <summary>
 
-             When implemented by a class, gets an object that
 
-             can be used to synchronize access to the <see cref="T:System.Collections.ICollection"/>.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.IsSynchronized">
 
-             <summary>
 
-             When implemented by a class, gets a value
 
-             indicating whether access to the <see cref="T:System.Collections.ICollection"/> is synchronized
 
-             (thread-safe).
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="T:Quartz.Util.FileUtil">
 
-             <summary>
 
-             Utility class for file handling related things.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="M:Quartz.Util.FileUtil.ResolveFile(System.String)">
 
-             <summary>
 
-             Resolves file to actual file if for example relative '~' used.
 
-             </summary>
 
-             <param name="fName">File name to check</param>
 
-             <returns>Expanded file name or actual no resolving was done.</returns>
 
-         </member>
 
-         <member name="T:Quartz.Util.Key`1">
 
-             <summary>
 
-             Object representing a job or trigger key.
 
-             </summary>
 
-             <author>  <a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.Util.Key`1.DefaultGroup">
 
-             <summary>
 
-             The default group for scheduling entities, with the value "DEFAULT".
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.Key`1.#ctor(System.String,System.String)">
 
-             <summary> 
 
-             Construct a new key with the given name and group.
 
-             </summary>
 
-             <param name="name">the name</param>
 
-             <param name="group">the group</param>
 
-         </member>
 
-         <member name="M:Quartz.Util.Key`1.ToString">
 
-             <summary> <para>
 
-             Return the string representation of the key. The format will be:
 
-             <group>.<name>.
 
-             </para>
 
-             
 
-             </summary>
 
-             <returns> the string representation of the key
 
-             </returns>
 
-         </member>
 
-         <member name="P:Quartz.Util.Key`1.Name">
 
-             <summary>
 
-             Get the name portion of the key.
 
-             </summary>
 
-             <returns> the name
 
-             </returns>
 
-         </member>
 
-         <member name="P:Quartz.Util.Key`1.Group">
 
-             <summary> <para>
 
-             Get the group portion of the key.
 
-             </para>
 
-             
 
-             </summary>
 
-             <returns> the group
 
-             </returns>
 
-         </member>
 
-         <member name="T:Quartz.Util.LogicalThreadContext">
 
-             <summary>
 
-             Wrapper class to access thread local data.
 
-             Data is either accessed from thread or HTTP Context's 
 
-             data if HTTP Context is avaiable.
 
-             </summary>
 
-             <author>Marko Lahma .NET</author>
 
-         </member>
 
-         <member name="M:Quartz.Util.LogicalThreadContext.GetData``1(System.String)">
 
-             <summary>
 
-             Retrieves an object with the specified name.
 
-             </summary>
 
-             <param name="name">The name of the item.</param>
 
-             <returns>The object in the call context associated with the specified name or null if no object has been stored previously</returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.LogicalThreadContext.SetData(System.String,System.Object)">
 
-             <summary>
 
-             Stores a given object and associates it with the specified name.
 
-             </summary>
 
-             <param name="name">The name with which to associate the new item.</param>
 
-             <param name="value">The object to store in the call context.</param>
 
-         </member>
 
-         <member name="M:Quartz.Util.LogicalThreadContext.FreeNamedDataSlot(System.String)">
 
-             <summary>
 
-             Empties a data slot with the specified name.
 
-             </summary>
 
-             <param name="name">The name of the data slot to empty.</param>
 
-         </member>
 
-         <member name="T:Quartz.Util.ObjectExtensions">
 
-             <summary>
 
-             Generic extension methods for objects.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.ObjectExtensions.DeepClone``1(``0)">
 
-             <summary>
 
-             Creates a deep copy of object by serializing to memory stream.
 
-             </summary>
 
-             <param name="obj"></param>
 
-         </member>
 
-         <member name="T:Quartz.Util.ObjectUtils">
 
-             <summary>
 
-             Utility methods that are used to convert objects from one type into another.
 
-             </summary>
 
-             <author>Aleksandar Seovic</author>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="M:Quartz.Util.ObjectUtils.ConvertValueIfNecessary(System.Type,System.Object)">
 
-             <summary>
 
-             Convert the value to the required <see cref="T:System.Type"/> (if necessary from a string).
 
-             </summary>
 
-             <param name="newValue">The proposed change value.</param>
 
-             <param name="requiredType">
 
-             The <see cref="T:System.Type"/> we must convert to.
 
-             </param>
 
-             <returns>The new value, possibly the result of type conversion.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.ObjectUtils.IsAssignableFrom(System.Object,System.Type)">
 
-             <summary>
 
-             Determines whether value is assignable to required type.
 
-             </summary>
 
-             <param name="value">The value to check.</param>
 
-             <param name="requiredType">Type of the required.</param>
 
-             <returns>
 
-             	<c>true</c> if value can be assigned as given type; otherwise, <c>false</c>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.ObjectUtils.InstantiateType``1(System.Type)">
 
-             <summary>
 
-             Instantiates an instance of the type specified.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.ObjectUtils.SetObjectProperties(System.Object,System.String[],System.Object[])">
 
-             <summary>
 
-             Sets the object properties using reflection.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.ObjectUtils.SetObjectProperties(System.Object,System.Collections.Specialized.NameValueCollection)">
 
-             <summary>
 
-             Sets the object properties using reflection.
 
-             </summary>
 
-             <param name="obj">The object to set values to.</param>
 
-             <param name="props">The properties to set to object.</param>
 
-         </member>
 
-         <member name="T:Quartz.Util.PropertiesParser">
 
-             <summary>
 
-             This is an utility class used to parse the properties.
 
-             </summary>
 
-             <author> James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.#ctor(System.Collections.Specialized.NameValueCollection)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Util.PropertiesParser"/> class.
 
-             </summary>
 
-             <param name="props">The props.</param>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetStringProperty(System.String)">
 
-             <summary>
 
-             Gets the string property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetStringProperty(System.String,System.String)">
 
-             <summary>
 
-             Gets the string property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="defaultValue">The default value.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetStringArrayProperty(System.String)">
 
-             <summary>
 
-             Gets the string array property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetStringArrayProperty(System.String,System.String[])">
 
-             <summary>
 
-             Gets the string array property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="defaultValue">The default value.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetBooleanProperty(System.String)">
 
-             <summary>
 
-             Gets the boolean property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetBooleanProperty(System.String,System.Boolean)">
 
-             <summary>
 
-             Gets the boolean property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="defaultValue">if set to <c>true</c> [defaultValue].</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetByteProperty(System.String)">
 
-             <summary>
 
-             Gets the byte property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetByteProperty(System.String,System.Byte)">
 
-             <summary>
 
-             Gets the byte property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="defaultValue">The default value.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetCharProperty(System.String)">
 
-             <summary>
 
-             Gets the char property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetCharProperty(System.String,System.Char)">
 
-             <summary>
 
-             Gets the char property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="defaultValue">The default value.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetDoubleProperty(System.String)">
 
-             <summary>
 
-             Gets the double property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetDoubleProperty(System.String,System.Double)">
 
-             <summary>
 
-             Gets the double property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="defaultValue">The default value.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetFloatProperty(System.String)">
 
-             <summary>
 
-             Gets the float property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetFloatProperty(System.String,System.Single)">
 
-             <summary>
 
-             Gets the float property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="defaultValue">The default value.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetIntProperty(System.String)">
 
-             <summary>
 
-             Gets the int property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetIntProperty(System.String,System.Int32)">
 
-             <summary>
 
-             Gets the int property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="defaultValue">The default value.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetIntArrayProperty(System.String)">
 
-             <summary>
 
-             Gets the int array property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetIntArrayProperty(System.String,System.Collections.Generic.IList{System.Int32})">
 
-             <summary>
 
-             Gets the int array property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="defaultValue">The default value.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetLongProperty(System.String)">
 
-             <summary>
 
-             Gets the long property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetLongProperty(System.String,System.Int64)">
 
-             <summary>
 
-             Gets the long property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="def">The def.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetTimeSpanProperty(System.String,System.TimeSpan)">
 
-             <summary>
 
-             Gets the TimeSpan property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="def">The def.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetShortProperty(System.String)">
 
-             <summary>
 
-             Gets the short property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetShortProperty(System.String,System.Int16)">
 
-             <summary>
 
-             Gets the short property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="defaultValue">The default value.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetPropertyGroups(System.String)">
 
-             <summary>
 
-             Gets the property groups.
 
-             </summary>
 
-             <param name="prefix">The prefix.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetPropertyGroup(System.String)">
 
-             <summary>
 
-             Gets the property group.
 
-             </summary>
 
-             <param name="prefix">The prefix.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetPropertyGroup(System.String,System.Boolean)">
 
-             <summary>
 
-             Gets the property group.
 
-             </summary>
 
-             <param name="prefix">The prefix.</param>
 
-             <param name="stripPrefix">if set to <c>true</c> [strip prefix].</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetPropertyGroup(System.String,System.Boolean,System.String[])">
 
-             <summary>
 
-             Get all properties that start with the given prefix.  
 
-             </summary>
 
-             <param name="prefix">The prefix for which to search.  If it does not end in a "." then one will be added to it for search purposes.</param>
 
-             <param name="stripPrefix">Whether to strip off the given <paramref name="prefix"/> in the result's keys.</param>
 
-             <param name="excludedPrefixes">Optional array of fully qualified prefixes to exclude.  For example if <see paramfref="prefix"/> is "a.b.c", then <see paramref="excludedPrefixes"/> might be "a.b.c.ignore".</param>
 
-             <returns>Group of <see cref="T:System.Collections.Specialized.NameValueCollection"/> that start with the given prefix, optionally have that prefix removed, and do not include properties that start with one of the given excluded prefixes.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.ReadFromEmbeddedAssemblyResource(System.String)">
 
-             <summary>
 
-             Reads the properties from assembly (embedded resource).
 
-             </summary>
 
-             <param name="resourceName">The file name to read resources from.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.ReadFromFileResource(System.String)">
 
-             <summary>
 
-             Reads the properties from file system.
 
-             </summary>
 
-             <param name="fileName">The file name to read resources from.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Util.PropertiesParser.UnderlyingProperties">
 
-             <summary>
 
-             Gets the underlying properties.
 
-             </summary>
 
-             <value>The underlying properties.</value>
 
-         </member>
 
-         <member name="T:Quartz.Util.QuartzEnvironment">
 
-             <summary>
 
-             Environment access helpers that fail gracefully if under medium trust.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.QuartzEnvironment.GetEnvironmentVariable(System.String)">
 
-             <summary>
 
-             Retrieves the value of an environment variable from the current process.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.QuartzEnvironment.GetEnvironmentVariables">
 
-             <summary>
 
-             Retrieves all environment variable names and their values from the current process.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Util.QuartzEnvironment.IsRunningOnMono">
 
-             <summary>
 
-             Return whether we are currently running under Mono runtime.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Util.StringExtensions">
 
-             <summary>
 
-             Extension methods for <see cref="T:System.String"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringExtensions.NullSafeTrim(System.String)">
 
-             <summary>
 
-             Allows null-safe trimming of string.
 
-             </summary>
 
-             <param name="s"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringExtensions.TrimEmptyToNull(System.String)">
 
-             <summary>
 
-             Trims string and if resulting string is empty, null is returned.
 
-             </summary>
 
-             <param name="s"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Util.StringKeyDirtyFlagMap">
 
-             <summary>
 
-             An implementation of <see cref="T:System.Collections.IDictionary"/> that wraps another <see cref="T:System.Collections.IDictionary"/>
 
-             and flags itself 'dirty' when it is modified, enforces that all keys are
 
-             strings. 
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Util.StringKeyDirtyFlagMap"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.#ctor(System.Int32)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Util.StringKeyDirtyFlagMap"/> class.
 
-             </summary>
 
-             <param name="initialCapacity">The initial capacity.</param>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.Equals(System.Object)">
 
-             <summary>
 
-             Determines whether the specified <see cref="T:System.Object"/> is equal to the current <see cref="T:System.Object"/>.
 
-             </summary>
 
-             <param name="obj">The <see cref="T:System.Object"/> to compare with the current <see cref="T:System.Object"/>.</param>
 
-             <returns>
 
-             	<see langword="true"/> if the specified <see cref="T:System.Object"/> is equal to the
 
-             current <see cref="T:System.Object"/>; otherwise, <see langword="false"/>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetHashCode">
 
-             <summary>
 
-             Serves as a hash function for a particular type, suitable
 
-             for use in hashing algorithms and data structures like a hash table.
 
-             </summary>
 
-             <returns>
 
-             A hash code for the current <see cref="T:System.Object"/>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetKeys">
 
-             <summary>
 
-             Gets the keys.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.PutAll(System.Collections.Generic.IDictionary{System.String,System.Object})">
 
-             <summary>
 
-             Adds the name-value pairs in the given <see cref="T:System.Collections.IDictionary"/> to the <see cref="T:Quartz.JobDataMap"/>.
 
-             <para>
 
-             All keys must be <see cref="T:System.String"/>s, and all values must be serializable.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.Put(System.String,System.Int32)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Int32"/> value to the <see cref="T:Quartz.IJob"/>'s
 
-             data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.Put(System.String,System.Int64)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Int64"/> value to the <see cref="T:Quartz.IJob"/>'s
 
-             data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.Put(System.String,System.Single)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Single"/> value to the <see cref="T:Quartz.IJob"/>'s
 
-             data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.Put(System.String,System.Double)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Double"/> value to the <see cref="T:Quartz.IJob"/>'s
 
-             data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.Put(System.String,System.Boolean)">
 
-             <summary> 
 
-             Adds the given <see cref="T:System.Boolean"/> value to the <see cref="T:Quartz.IJob"/>'s
 
-             data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.Put(System.String,System.Char)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Char"/> value to the <see cref="T:Quartz.IJob"/>'s
 
-             data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.Put(System.String,System.String)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.String"/> value to the <see cref="T:Quartz.IJob"/>'s
 
-             data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetInt(System.String)">
 
-             <summary> 
 
-             Retrieve the identified <see cref="T:System.Int32"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetLong(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Int64"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetFloat(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Single"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetDouble(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Double"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetBoolean(System.String)">
 
-             <summary> 
 
-             Retrieve the identified <see cref="T:System.Boolean"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetChar(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Char"/> value from the <see cref="T:Quartz.JobDataMap"/>. 
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetString(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.String"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetDateTime(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.DateTime"/> value from the <see cref="T:Quartz.JobDataMap"/>. 
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetDateTimeOffset(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.DateTimeOffset"/> value from the <see cref="T:Quartz.JobDataMap"/>. 
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetTimeSpan(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.TimeSpan"/> value from the <see cref="T:Quartz.JobDataMap"/>. 
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.TimeZoneUtil.ConvertTime(System.DateTimeOffset,System.TimeZoneInfo)">
 
-             <summary>
 
-             TimeZoneInfo.ConvertTime is not supported under mono
 
-             </summary>
 
-             <param name="dateTimeOffset"></param>
 
-             <param name="timeZoneInfo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.TimeZoneUtil.GetUtcOffset(System.DateTimeOffset,System.TimeZoneInfo)">
 
-             <summary>
 
-             TimeZoneInfo.GetUtcOffset(DateTimeOffset) is not supported under mono
 
-             </summary>
 
-             <param name="dateTimeOffset"></param>
 
-             <param name="timeZoneInfo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.TimeZoneUtil.FindTimeZoneById(System.String)">
 
-             <summary>
 
-             Tries to find time zone with given id, has ability do some fallbacks when necessary.
 
-             </summary>
 
-             <param name="id">System id of the time zone.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.QuartzXmlConfiguration20">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.QuartzXmlConfiguration20.preprocessingcommands">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.QuartzXmlConfiguration20.processingdirectives">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.QuartzXmlConfiguration20.schedule">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.QuartzXmlConfiguration20.version">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.preprocessingcommandsType">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.preprocessingcommandsType.deletejobsingroup">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.preprocessingcommandsType.deletetriggersingroup">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.preprocessingcommandsType.deletejob">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.preprocessingcommandsType.deletetrigger">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.preprocessingcommandsTypeDeletejob">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.preprocessingcommandsTypeDeletejob.name">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.preprocessingcommandsTypeDeletejob.group">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.abstractTriggerType">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.name">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.group">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.description">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.jobname">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.jobgroup">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.priority">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.calendarname">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.jobdatamap">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.Item">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.endtime">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.endtimeSpecified">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.jobdatamapType">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.jobdatamapType.entry">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.entryType">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.entryType.key">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.entryType.value">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.calendarIntervalTriggerType">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.calendarIntervalTriggerType.misfireinstruction">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.calendarIntervalTriggerType.repeatinterval">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.calendarIntervalTriggerType.repeatintervalunit">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.cronTriggerType">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.cronTriggerType.misfireinstruction">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.cronTriggerType.cronexpression">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.cronTriggerType.timezone">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.simpleTriggerType">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.simpleTriggerType.misfireinstruction">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.simpleTriggerType.repeatcount">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.simpleTriggerType.repeatinterval">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.triggerType">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.triggerType.Item">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.jobdetailType">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.jobdetailType.name">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.jobdetailType.group">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.jobdetailType.description">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.jobdetailType.jobtype">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.jobdetailType.durable">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.jobdetailType.recover">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.jobdetailType.jobdatamap">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.processingdirectivesType">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.processingdirectivesType.overwriteexistingdata">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.processingdirectivesType.ignoreduplicates">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.processingdirectivesType.scheduletriggerrelativetoreplacedtrigger">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.preprocessingcommandsTypeDeletetrigger">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.preprocessingcommandsTypeDeletetrigger.name">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.preprocessingcommandsTypeDeletetrigger.group">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.jobschedulingdataSchedule">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.jobschedulingdataSchedule.job">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.jobschedulingdataSchedule.trigger">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.ValidationException">
 
-             <summary> 
 
-             Reports JobSchedulingDataProcessor validation exceptions.
 
-             </summary>
 
-             <author> <a href="mailto:bonhamcm@thirdeyeconsulting.com">Chris Bonham</a></author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Xml.ValidationException.#ctor">
 
-             <summary>
 
-             Constructor for ValidationException.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Xml.ValidationException.#ctor(System.String)">
 
-             <summary>
 
-             Constructor for ValidationException.
 
-             </summary>
 
-             <param name="message">exception message.</param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.ValidationException.#ctor(System.Collections.Generic.IEnumerable{System.Exception})">
 
-             <summary>
 
-             Constructor for ValidationException.
 
-             </summary>
 
-             <param name="errors">collection of validation exceptions.</param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.ValidationException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.SchedulerException"/> class.
 
-             </summary>
 
-             <param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"></see> that holds the serialized object data about the exception being thrown.</param>
 
-             <param name="context">The <see cref="T:System.Runtime.Serialization.StreamingContext"></see> that contains contextual information about the source or destination.</param>
 
-             <exception cref="T:System.Runtime.Serialization.SerializationException">The class name is null or <see cref="P:System.Exception.HResult"></see> is zero (0). </exception>
 
-             <exception cref="T:System.ArgumentNullException">The info parameter is null. </exception>
 
-         </member>
 
-         <member name="P:Quartz.Xml.ValidationException.ValidationExceptions">
 
-             <summary>
 
-             Gets the validation exceptions.
 
-             </summary>
 
-             <value>The validation exceptions.</value>
 
-         </member>
 
-         <member name="P:Quartz.Xml.ValidationException.Message">
 
-             <summary>
 
-             Returns the detail message string.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Xml.XMLSchedulingDataProcessor">
 
-             <summary> 
 
-             Parses an XML file that declares Jobs and their schedules (Triggers).
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The xml document must conform to the format defined in "job_scheduling_data_2_0.xsd"
 
-             </para>
 
-             
 
-             <para>
 
-             After creating an instance of this class, you should call one of the <see cref="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessFile"/>
 
-             functions, after which you may call the ScheduledJobs()
 
-             function to get a handle to the defined Jobs and Triggers, which can then be
 
-             scheduled with the <see cref="T:Quartz.IScheduler"/>. Alternatively, you could call
 
-             the <see cref="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessFileAndScheduleJobs(Quartz.IScheduler)"/> function to do all of this
 
-             in one step.
 
-             </para>
 
-             
 
-             <para>
 
-             The same instance can be used again and again, with the list of defined Jobs
 
-             being cleared each time you call a <see cref="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessFile"/> method,
 
-             however a single instance is not thread-safe.
 
-             </para>
 
-             </remarks>
 
-             <author><a href="mailto:bonhamcm@thirdeyeconsulting.com">Chris Bonham</a></author>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-             <author>Christian Krumm (.NET Bugfix)</author>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.#ctor(Quartz.Spi.ITypeLoadHelper)">
 
-             <summary>
 
-             Constructor for XMLSchedulingDataProcessor.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessFile">
 
-             <summary> 
 
-             Process the xml file in the default location (a file named
 
-             "quartz_jobs.xml" in the current working directory).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessFile(System.String)">
 
-             <summary>
 
-             Process the xml file named <see param="fileName" />.
 
-             </summary>
 
-             <param name="fileName">meta data file name.</param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessFile(System.String,System.String)">
 
-             <summary>
 
-             Process the xmlfile named <see param="fileName" /> with the given system
 
-             ID.
 
-             </summary>
 
-             <param name="fileName">Name of the file.</param>
 
-             <param name="systemId">The system id.</param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessStream(System.IO.Stream,System.String)">
 
-             <summary>
 
-             Process the xmlfile named <see param="fileName" /> with the given system
 
-             ID.
 
-             </summary>
 
-             <param name="stream">The stream.</param>
 
-             <param name="systemId">The system id.</param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessFileAndScheduleJobs(Quartz.IScheduler,System.Boolean)">
 
-             <summary>
 
-             Process the xml file in the default location, and schedule all of the jobs defined within it.
 
-             </summary>
 
-             <remarks>Note that we will set overWriteExistingJobs after the default xml is parsed.</remarks>
 
-             <param name="sched"></param>
 
-             <param name="overWriteExistingJobs"></param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessFileAndScheduleJobs(Quartz.IScheduler)">
 
-             <summary> 
 
-             Process the xml file in the default location, and schedule all of the
 
-             jobs defined within it.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessFileAndScheduleJobs(System.String,Quartz.IScheduler)">
 
-             <summary>
 
-             Process the xml file in the given location, and schedule all of the
 
-             jobs defined within it.
 
-             </summary>
 
-             <param name="fileName">meta data file name.</param>
 
-             <param name="sched">The scheduler.</param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessFileAndScheduleJobs(System.String,System.String,Quartz.IScheduler)">
 
-             <summary>
 
-             Process the xml file in the given location, and schedule all of the
 
-             jobs defined within it.
 
-             </summary>
 
-             <param name="fileName">Name of the file.</param>
 
-             <param name="systemId">The system id.</param>
 
-             <param name="sched">The sched.</param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessStreamAndScheduleJobs(System.IO.Stream,Quartz.IScheduler)">
 
-             <summary>
 
-             Process the xml file in the given location, and schedule all of the
 
-             jobs defined within it.
 
-             </summary>
 
-             <param name="stream">stream to read XML data from.</param>
 
-             <param name="sched">The sched.</param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ScheduleJobs(Quartz.IScheduler)">
 
-             <summary>
 
-             Schedules the given sets of jobs and triggers.
 
-             </summary>
 
-             <param name="sched">The sched.</param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.AddValidationException(System.Xml.XmlException)">
 
-             <summary>
 
-             Adds a detected validation exception.
 
-             </summary>
 
-             <param name="e">The exception.</param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ClearValidationExceptions">
 
-             <summary>
 
-             Resets the the number of detected validation exceptions.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.MaybeThrowValidationException">
 
-             <summary>
 
-             Throws a ValidationException if the number of validationExceptions
 
-             detected is greater than zero.
 
-             </summary>
 
-             <exception cref="T:Quartz.Xml.ValidationException"> 
 
-             DTD validation exception.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Xml.XMLSchedulingDataProcessor.OverWriteExistingData">
 
-             <summary>
 
-             Whether the existing scheduling data (with same identifiers) will be 
 
-             overwritten. 
 
-             </summary>
 
-             <remarks>
 
-             If false, and <see cref="P:Quartz.Xml.XMLSchedulingDataProcessor.IgnoreDuplicates"/> is not false, and jobs or 
 
-             triggers with the same names already exist as those in the file, an 
 
-             error will occur.
 
-             </remarks> 
 
-             <seealso cref="P:Quartz.Xml.XMLSchedulingDataProcessor.IgnoreDuplicates"/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.XMLSchedulingDataProcessor.IgnoreDuplicates">
 
-             <summary>
 
-             If true (and <see cref="P:Quartz.Xml.XMLSchedulingDataProcessor.OverWriteExistingData"/> is false) then any 
 
-             job/triggers encountered in this file that have names that already exist 
 
-             in the scheduler will be ignored, and no error will be produced.
 
-             </summary>
 
-             <seealso cref="P:Quartz.Xml.XMLSchedulingDataProcessor.OverWriteExistingData"/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.XMLSchedulingDataProcessor.ScheduleTriggerRelativeToReplacedTrigger">
 
-             <summary>
 
-             If true (and <see cref="P:Quartz.Xml.XMLSchedulingDataProcessor.OverWriteExistingData"/> is true) then any 
 
-             job/triggers encountered in this file that already exist is scheduler
 
-             will be updated with start time relative to old trigger. Effectively
 
-             new trigger's last fire time will be updated to old trigger's last fire time
 
-             and trigger's next fire time will updated to be next from this last fire time.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Xml.XMLSchedulingDataProcessor.Log">
 
-             <summary>
 
-             Gets the log.
 
-             </summary>
 
-             <value>The log.</value>
 
-         </member>
 
-         <member name="T:Quartz.Xml.XMLSchedulingDataProcessor.Constants">
 
-             <summary>
 
-             Helper class to map constant names to their values.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.CalendarIntervalScheduleBuilder">
 
-             <summary>
 
-             CalendarIntervalScheduleBuilder is a <see cref="T:Quartz.IScheduleBuilder"/>
 
-             that defines calendar time (day, week, month, year) interval-based
 
-             schedules for Triggers.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             Quartz provides a builder-style API for constructing scheduling-related
 
-             entities via a Domain-Specific Language (DSL).  The DSL can best be
 
-             utilized through the usage of static imports of the methods on the classes
 
-             <see cref="T:Quartz.TriggerBuilder"/>, <see cref="T:Quartz.JobBuilder"/>,
 
-             <see cref="T:Quartz.DateBuilder"/>, <see cref="T:Quartz.JobKey"/>, <see cref="T:Quartz.TriggerKey"/>
 
-             and the various <see cref="T:Quartz.IScheduleBuilder"/> implementations.
 
-             </para>
 
-             <para>Client code can then use the DSL to write code such as this:</para>
 
-             <code>
 
-             JobDetail job = JobBuilder.Create<MyJob>()
 
-                 .WithIdentity("myJob")
 
-                 .Build();
 
-             Trigger trigger = TriggerBuilder.Create()
 
-                 .WithIdentity("myTrigger", "myTriggerGroup")
 
-                 .WithSimpleSchedule(x => x
 
-                     .WithIntervalInHours(1)
 
-                     .RepeatForever())
 
-                 .StartAt(DateBuilder.FutureDate(10, IntervalUnit.Minute))
 
-                 .Build();
 
-             scheduler.scheduleJob(job, trigger);
 
-             </code>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.ICalendarIntervalTrigger"/>
 
-             <seealso cref="T:Quartz.CronScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.IScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.SimpleScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.TriggerBuilder"/>
 
-         </member>
 
-         <member name="T:Quartz.ScheduleBuilder`1">
 
-             <summary>
 
-             Base class for <see cref="T:Quartz.IScheduleBuilder"/> implementors.
 
-             </summary>
 
-             <typeparam name="T"></typeparam>
 
-         </member>
 
-         <member name="T:Quartz.IScheduleBuilder">
 
-             <summary>
 
-             Schedule builders offer fluent interface and are responsible for creating schedules.
 
-             </summary>
 
-             <seealso cref="T:Quartz.SimpleScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.CalendarIntervalScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.CronScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.DailyTimeIntervalScheduleBuilder"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduleBuilder.Build">
 
-             <summary>
 
-             Build the actual Trigger -- NOT intended to be invoked by end users,
 
-             but will rather be invoked by a TriggerBuilder which this
 
-             ScheduleBuilder is given to.
 
-             </summary>
 
-             <seealso cref="M:Quartz.TriggerBuilder.WithSchedule(Quartz.IScheduleBuilder)"/>
 
-         </member>
 
-         <member name="M:Quartz.ScheduleBuilder`1.Build">
 
-             <summary>
 
-             Build the actual Trigger -- NOT intended to be invoked by end users,
 
-             but will rather be invoked by a TriggerBuilder which this
 
-             ScheduleBuilder is given to.
 
-             </summary>
 
-             <seealso cref="M:Quartz.TriggerBuilder.WithSchedule(Quartz.IScheduleBuilder)"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.Create">
 
-             <summary>
 
-             Create a CalendarIntervalScheduleBuilder.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.Build">
 
-             <summary>
 
-             Build the actual Trigger -- NOT intended to be invoked by end users,
 
-             but will rather be invoked by a TriggerBuilder which this 
 
-             ScheduleBuilder is given to.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithInterval(System.Int32,Quartz.IntervalUnit)">
 
-             <summary>
 
-             Specify the time unit and interval for the Trigger to be produced.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="interval">the interval at which the trigger should repeat.</param>
 
-             <param name="unit"> the time unit (IntervalUnit) of the interval.</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatInterval"/>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithIntervalInSeconds(System.Int32)">
 
-             <summary>
 
-             Specify an interval in the IntervalUnit.SECOND that the produced
 
-             Trigger will repeat at.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="intervalInSeconds">the number of seconds at which the trigger should repeat.</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatInterval"/>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithIntervalInMinutes(System.Int32)">
 
-             <summary>
 
-             Specify an interval in the IntervalUnit.MINUTE that the produced
 
-             Trigger will repeat at.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="intervalInMinutes">the number of minutes at which the trigger should repeat.</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatInterval"/>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithIntervalInHours(System.Int32)">
 
-             <summary>
 
-             Specify an interval in the IntervalUnit.HOUR that the produced
 
-             Trigger will repeat at.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="intervalInHours">the number of hours at which the trigger should repeat.</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatInterval"/>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithIntervalInDays(System.Int32)">
 
-             <summary>
 
-             Specify an interval in the IntervalUnit.DAY that the produced
 
-             Trigger will repeat at.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="intervalInDays">the number of days at which the trigger should repeat.</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatInterval"/>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithIntervalInWeeks(System.Int32)">
 
-             <summary>
 
-             Specify an interval in the IntervalUnit.WEEK that the produced
 
-             Trigger will repeat at.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="intervalInWeeks">the number of weeks at which the trigger should repeat.</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatInterval"/>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithIntervalInMonths(System.Int32)">
 
-             <summary>
 
-             Specify an interval in the IntervalUnit.MONTH that the produced
 
-             Trigger will repeat at.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="intervalInMonths">the number of months at which the trigger should repeat.</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatInterval"/>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithIntervalInYears(System.Int32)">
 
-             <summary>
 
-             Specify an interval in the IntervalUnit.YEAR that the produced
 
-             Trigger will repeat at.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="intervalInYears">the number of years at which the trigger should repeat.</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatInterval"/>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithMisfireHandlingInstructionIgnoreMisfires">
 
-             <summary>
 
-             If the Trigger misfires, use the
 
-             <see cref="F:Quartz.MisfireInstruction.IgnoreMisfirePolicy"/> instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated CronScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.IgnoreMisfirePolicy"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithMisfireHandlingInstructionDoNothing">
 
-             <summary>
 
-             If the Trigger misfires, use the
 
-             <see cref="F:Quartz.MisfireInstruction.CalendarIntervalTrigger.DoNothing"/> instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.CalendarIntervalTrigger.DoNothing"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithMisfireHandlingInstructionFireAndProceed">
 
-             <summary>
 
-             If the Trigger misfires, use the
 
-             <see cref="F:Quartz.MisfireInstruction.CalendarIntervalTrigger.FireOnceNow"/> instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.CalendarIntervalTrigger.FireOnceNow"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.InTimeZone(System.TimeZoneInfo)">
 
-             <summary>
 
-             TimeZone in which to base the schedule.
 
-             </summary>
 
-             <param name="timezone">the time-zone for the schedule</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.TimeZone"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.PreserveHourOfDayAcrossDaylightSavings(System.Boolean)">
 
-             <summary>
 
-              If intervals are a day or greater, this property (set to true) will 
 
-              cause the firing of the trigger to always occur at the same time of day,
 
-              (the time of day of the startTime) regardless of daylight saving time 
 
-              transitions.  Default value is false.
 
-              </summary>
 
-              <remarks>
 
-              <para>
 
-              For example, without the property set, your trigger may have a start 
 
-              time of 9:00 am on March 1st, and a repeat interval of 2 days.  But 
 
-              after the daylight saving transition occurs, the trigger may start 
 
-              firing at 8:00 am every other day.
 
-              </para>
 
-              <para>
 
-              If however, the time of day does not exist on a given day to fire
 
-              (e.g. 2:00 am in the United States on the days of daylight saving
 
-              transition), the trigger will go ahead and fire one hour off on 
 
-              that day, and then resume the normal hour on other days.  If
 
-              you wish for the trigger to never fire at the "wrong" hour, then
 
-              you should set the property skipDayIfHourDoesNotExist.
 
-              </para>
 
-             </remarks>
 
-              <seealso cref="M:Quartz.CalendarIntervalScheduleBuilder.SkipDayIfHourDoesNotExist(System.Boolean)"/>
 
-              <seealso cref="T:System.TimeZone"/>
 
-              <seealso cref="M:Quartz.CalendarIntervalScheduleBuilder.InTimeZone(System.TimeZoneInfo)"/>
 
-              <seealso cref="M:Quartz.TriggerBuilder.StartAt(System.DateTimeOffset)"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.SkipDayIfHourDoesNotExist(System.Boolean)">
 
-             <summary>
 
-             If intervals are a day or greater, and 
 
-             preserveHourOfDayAcrossDaylightSavings property is set to true, and the
 
-             hour of the day does not exist on a given day for which the trigger 
 
-             would fire, the day will be skipped and the trigger advanced a second
 
-             interval if this property is set to true.  Defaults to false.
 
-             </summary>
 
-             <remarks>
 
-             <b>CAUTION!</b>  If you enable this property, and your hour of day happens 
 
-             to be that of daylight savings transition (e.g. 2:00 am in the United 
 
-             States) and the trigger's interval would have had the trigger fire on
 
-             that day, then you may actually completely miss a firing on the day of 
 
-             transition if that hour of day does not exist on that day!  In such a 
 
-             case the next fire time of the trigger will be computed as double (if 
 
-             the interval is 2 days, then a span of 4 days between firings will 
 
-             occur).
 
-             </remarks>
 
-             <seealso cref="M:Quartz.CalendarIntervalScheduleBuilder.PreserveHourOfDayAcrossDaylightSavings(System.Boolean)"/>
 
-         </member>
 
-         <member name="T:Quartz.CalendarIntervalTriggerBuilderExtensions">
 
-             <summary>
 
-             Extension methods that attach <see cref="T:Quartz.CalendarIntervalScheduleBuilder"/> to <see cref="T:Quartz.TriggerBuilder"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.CronExpression">
 
-             <summary>
 
-             Provides a parser and evaluator for unix-like cron expressions. Cron 
 
-             expressions provide the ability to specify complex time combinations such as
 
-             "At 8:00am every Monday through Friday" or "At 1:30am every 
 
-             last Friday of the month". 
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             Cron expressions are comprised of 6 required fields and one optional field
 
-             separated by white space. The fields respectively are described as follows:
 
-             </para>
 
-             <table cellspacing="8">
 
-             <tr>
 
-             <th align="left">Field Name</th>
 
-             <th align="left"> </th>
 
-             <th align="left">Allowed Values</th>
 
-             <th align="left"> </th>
 
-             <th align="left">Allowed Special Characters</th>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">Seconds</td>
 
-             <td align="left"> </td>
 
-             <td align="left">0-59</td>
 
-             <td align="left"> </td>
 
-             <td align="left">, - /// /</td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">Minutes</td>
 
-             <td align="left"> </td>
 
-             <td align="left">0-59</td>
 
-             <td align="left"> </td>
 
-             <td align="left">, - /// /</td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">Hours</td>
 
-             <td align="left"> </td>
 
-             <td align="left">0-23</td>
 
-             <td align="left"> </td>
 
-             <td align="left">, - /// /</td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">Day-of-month</td>
 
-             <td align="left"> </td>
 
-             <td align="left">1-31</td>
 
-             <td align="left"> </td>
 
-             <td align="left">, - /// ? / L W C</td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">Month</td>
 
-             <td align="left"> </td>
 
-             <td align="left">1-12 or JAN-DEC</td>
 
-             <td align="left"> </td>
 
-             <td align="left">, - /// /</td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">Day-of-Week</td>
 
-             <td align="left"> </td>
 
-             <td align="left">1-7 or SUN-SAT</td>
 
-             <td align="left"> </td>
 
-             <td align="left">, - /// ? / L #</td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">Year (Optional)</td>
 
-             <td align="left"> </td>
 
-             <td align="left">empty, 1970-2199</td>
 
-             <td align="left"> </td>
 
-             <td align="left">, - /// /</td>
 
-             </tr>
 
-             </table>
 
-             <para>
 
-             The '*' character is used to specify all values. For example, "*" 
 
-             in the minute field means "every minute".
 
-             </para>
 
-             <para>
 
-             The '?' character is allowed for the day-of-month and day-of-week fields. It
 
-             is used to specify 'no specific value'. This is useful when you need to
 
-             specify something in one of the two fields, but not the other.
 
-             </para>
 
-             <para>
 
-             The '-' character is used to specify ranges For example "10-12" in
 
-             the hour field means "the hours 10, 11 and 12".
 
-             </para>
 
-             <para>
 
-             The ',' character is used to specify additional values. For example
 
-             "MON,WED,FRI" in the day-of-week field means "the days Monday,
 
-             Wednesday, and Friday".
 
-             </para>
 
-             <para>
 
-             The '/' character is used to specify increments. For example "0/15"
 
-             in the seconds field means "the seconds 0, 15, 30, and 45". And 
 
-             "5/15" in the seconds field means "the seconds 5, 20, 35, and
 
-             50".  Specifying '*' before the  '/' is equivalent to specifying 0 is
 
-             the value to start with. Essentially, for each field in the expression, there
 
-             is a set of numbers that can be turned on or off. For seconds and minutes, 
 
-             the numbers range from 0 to 59. For hours 0 to 23, for days of the month 0 to
 
-             31, and for months 1 to 12. The "/" character simply helps you turn
 
-             on every "nth" value in the given set. Thus "7/6" in the
 
-             month field only turns on month "7", it does NOT mean every 6th 
 
-             month, please note that subtlety.  
 
-             </para>
 
-             <para>
 
-             The 'L' character is allowed for the day-of-month and day-of-week fields.
 
-             This character is short-hand for "last", but it has different 
 
-             meaning in each of the two fields. For example, the value "L" in 
 
-             the day-of-month field means "the last day of the month" - day 31 
 
-             for January, day 28 for February on non-leap years. If used in the 
 
-             day-of-week field by itself, it simply means "7" or 
 
-             "SAT". But if used in the day-of-week field after another value, it
 
-             means "the last xxx day of the month" - for example "6L"
 
-             means "the last friday of the month". You can also specify an offset 
 
-             from the last day of the month, such as "L-3" which would mean the third-to-last 
 
-             day of the calendar month. <i>When using the 'L' option, it is important not to 
 
-             specify lists, or ranges of values, as you'll get confusing/unexpected results.</i>
 
-             </para>
 
-             <para>
 
-             The 'W' character is allowed for the day-of-month field.  This character 
 
-             is used to specify the weekday (Monday-Friday) nearest the given day.  As an 
 
-             example, if you were to specify "15W" as the value for the 
 
-             day-of-month field, the meaning is: "the nearest weekday to the 15th of
 
-             the month". So if the 15th is a Saturday, the trigger will fire on 
 
-             Friday the 14th. If the 15th is a Sunday, the trigger will fire on Monday the
 
-             16th. If the 15th is a Tuesday, then it will fire on Tuesday the 15th. 
 
-             However if you specify "1W" as the value for day-of-month, and the
 
-             1st is a Saturday, the trigger will fire on Monday the 3rd, as it will not 
 
-             'jump' over the boundary of a month's days.  The 'W' character can only be 
 
-             specified when the day-of-month is a single day, not a range or list of days.
 
-             </para>
 
-             <para>
 
-             The 'L' and 'W' characters can also be combined for the day-of-month 
 
-             expression to yield 'LW', which translates to "last weekday of the 
 
-             month".
 
-             </para>
 
-             <para>
 
-             The '#' character is allowed for the day-of-week field. This character is
 
-             used to specify "the nth" XXX day of the month. For example, the 
 
-             value of "6#3" in the day-of-week field means the third Friday of 
 
-             the month (day 6 = Friday and "#3" = the 3rd one in the month). 
 
-             Other examples: "2#1" = the first Monday of the month and 
 
-             "4#5" = the fifth Wednesday of the month. Note that if you specify
 
-             "#5" and there is not 5 of the given day-of-week in the month, then
 
-             no firing will occur that month. If the '#' character is used, there can
 
-             only be one expression in the day-of-week field ("3#1,6#3" is 
 
-             not valid, since there are two expressions).
 
-             </para>
 
-             <para>
 
-             <!--The 'C' character is allowed for the day-of-month and day-of-week fields.
 
-             This character is short-hand for "calendar". This means values are
 
-             calculated against the associated calendar, if any. If no calendar is
 
-             associated, then it is equivalent to having an all-inclusive calendar. A
 
-             value of "5C" in the day-of-month field means "the first day included by the
 
-             calendar on or after the 5th". A value of "1C" in the day-of-week field
 
-             means "the first day included by the calendar on or after Sunday". -->
 
-             </para>
 
-             <para>
 
-             The legal characters and the names of months and days of the week are not
 
-             case sensitive.
 
-             </para>
 
-             <para>
 
-             <b>NOTES:</b>
 
-             <ul>
 
-             <li>Support for specifying both a day-of-week and a day-of-month value is
 
-             not complete (you'll need to use the '?' character in one of these fields).
 
-             </li>
 
-             <li>Overflowing ranges is supported - that is, having a larger number on 
 
-             the left hand side than the right. You might do 22-2 to catch 10 o'clock 
 
-             at night until 2 o'clock in the morning, or you might have NOV-FEB. It is 
 
-             very important to note that overuse of overflowing ranges creates ranges 
 
-             that don't make sense and no effort has been made to determine which 
 
-             interpretation CronExpression chooses. An example would be 
 
-             "0 0 14-6 ? * FRI-MON". </li>
 
-             </ul>
 
-             </para>
 
-             </remarks>
 
-             <author>Sharada Jambula</author>
 
-             <author>James House</author>
 
-             <author>Contributions from Mads Henderson</author>
 
-             <author>Refactoring from CronTrigger to CronExpression by Aaron Craven</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.Second">
 
-             <summary>
 
-             Field specification for second.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.Minute">
 
-             <summary>
 
-             Field specification for minute.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.Hour">
 
-             <summary>
 
-             Field specification for hour.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.DayOfMonth">
 
-             <summary>
 
-             Field specification for day of month.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.Month">
 
-             <summary>
 
-             Field specification for month.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.DayOfWeek">
 
-             <summary>
 
-             Field specification for day of week.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.Year">
 
-             <summary>
 
-             Field specification for year.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.AllSpecInt">
 
-             <summary>
 
-             Field specification for all wildcard value '*'.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.NoSpecInt">
 
-             <summary>
 
-             Field specification for not specified value '?'.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.AllSpec">
 
-             <summary>
 
-             Field specification for wildcard '*'.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.NoSpec">
 
-             <summary>
 
-             Field specification for no specification at all '?'.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.seconds">
 
-             <summary>
 
-             Seconds.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.minutes">
 
-             <summary>
 
-             minutes.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.hours">
 
-             <summary>
 
-             Hours.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.daysOfMonth">
 
-             <summary>
 
-             Days of month.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.months">
 
-             <summary>
 
-             Months.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.daysOfWeek">
 
-             <summary>
 
-             Days of week.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.years">
 
-             <summary>
 
-             Years.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.lastdayOfWeek">
 
-             <summary>
 
-             Last day of week.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.nthdayOfWeek">
 
-             <summary>
 
-             Nth day of week.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.lastdayOfMonth">
 
-             <summary>
 
-             Last day of month.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.nearestWeekday">
 
-             <summary>
 
-             Nearest weekday.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.calendardayOfWeek">
 
-             <summary>
 
-             Calendar day of week.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.calendardayOfMonth">
 
-             <summary>
 
-             Calendar day of month.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.expressionParsed">
 
-             <summary>
 
-             Expression parsed.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.#ctor(System.String)">
 
-             <summary>
 
-              Constructs a new <see cref="P:Quartz.CronExpression.CronExpressionString"/> based on the specified 
 
-              parameter.
 
-              </summary>
 
-              <param name="cronExpression">
 
-              String representation of the cron expression the new object should represent
 
-              </param>
 
-              <see cref="P:Quartz.CronExpression.CronExpressionString"/>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.IsSatisfiedBy(System.DateTimeOffset)">
 
-             <summary>
 
-             Indicates whether the given date satisfies the cron expression. 
 
-             </summary>
 
-             <remarks>
 
-             Note that  milliseconds are ignored, so two Dates falling on different milliseconds
 
-             of the same second will always have the same result here.
 
-             </remarks>
 
-             <param name="dateUtc">The date to evaluate.</param>
 
-             <returns>a boolean indicating whether the given date satisfies the cron expression</returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetNextValidTimeAfter(System.DateTimeOffset)">
 
-             <summary>
 
-             Returns the next date/time <i>after</i> the given date/time which
 
-             satisfies the cron expression.
 
-             </summary>
 
-             <param name="date">the date/time at which to begin the search for the next valid date/time</param>
 
-             <returns>the next valid date/time</returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetNextInvalidTimeAfter(System.DateTimeOffset)">
 
-             <summary>
 
-             Returns the next date/time <i>after</i> the given date/time which does
 
-             <i>not</i> satisfy the expression.
 
-             </summary>
 
-             <param name="date">the date/time at which to begin the search for the next invalid date/time</param>
 
-             <returns>the next valid date/time</returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.ToString">
 
-             <summary>
 
-             Returns the string representation of the <see cref="T:Quartz.CronExpression"/>
 
-             </summary>
 
-             <returns>The string representation of the <see cref="T:Quartz.CronExpression"/></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.IsValidExpression(System.String)">
 
-             <summary>
 
-             Indicates whether the specified cron expression can be parsed into a 
 
-             valid cron expression
 
-             </summary>
 
-             <param name="cronExpression">the expression to evaluate</param>
 
-             <returns>a boolean indicating whether the given expression is a valid cron
 
-                     expression</returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.BuildExpression(System.String)">
 
-             <summary>
 
-             Builds the expression.
 
-             </summary>
 
-             <param name="expression">The expression.</param>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.StoreExpressionVals(System.Int32,System.String,System.Int32)">
 
-             <summary>
 
-             Stores the expression values.
 
-             </summary>
 
-             <param name="pos">The position.</param>
 
-             <param name="s">The string to traverse.</param>
 
-             <param name="type">The type of value.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.CheckNext(System.Int32,System.String,System.Int32,System.Int32)">
 
-             <summary>
 
-             Checks the next value.
 
-             </summary>
 
-             <param name="pos">The position.</param>
 
-             <param name="s">The string to check.</param>
 
-             <param name="val">The value.</param>
 
-             <param name="type">The type to search.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetExpressionSummary">
 
-             <summary>
 
-             Gets the expression summary.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetExpressionSetSummary(Quartz.Collection.ISet{System.Int32})">
 
-             <summary>
 
-             Gets the expression set summary.
 
-             </summary>
 
-             <param name="data">The data.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.SkipWhiteSpace(System.Int32,System.String)">
 
-             <summary>
 
-             Skips the white space.
 
-             </summary>
 
-             <param name="i">The i.</param>
 
-             <param name="s">The s.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.FindNextWhiteSpace(System.Int32,System.String)">
 
-             <summary>
 
-             Finds the next white space.
 
-             </summary>
 
-             <param name="i">The i.</param>
 
-             <param name="s">The s.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.AddToSet(System.Int32,System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Adds to set.
 
-             </summary>
 
-             <param name="val">The val.</param>
 
-             <param name="end">The end.</param>
 
-             <param name="incr">The incr.</param>
 
-             <param name="type">The type.</param>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetSet(System.Int32)">
 
-             <summary>
 
-             Gets the set of given type.
 
-             </summary>
 
-             <param name="type">The type of set to get.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetValue(System.Int32,System.String,System.Int32)">
 
-             <summary>
 
-             Gets the value.
 
-             </summary>
 
-             <param name="v">The v.</param>
 
-             <param name="s">The s.</param>
 
-             <param name="i">The i.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetNumericValue(System.String,System.Int32)">
 
-             <summary>
 
-             Gets the numeric value from string.
 
-             </summary>
 
-             <param name="s">The string to parse from.</param>
 
-             <param name="i">The i.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetMonthNumber(System.String)">
 
-             <summary>
 
-             Gets the month number.
 
-             </summary>
 
-             <param name="s">The string to map with.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetDayOfWeekNumber(System.String)">
 
-             <summary>
 
-             Gets the day of week number.
 
-             </summary>
 
-             <param name="s">The s.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetTime(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Gets the time from given time parts.
 
-             </summary>
 
-             <param name="sc">The seconds.</param>
 
-             <param name="mn">The minutes.</param>
 
-             <param name="hr">The hours.</param>
 
-             <param name="dayofmn">The day of month.</param>
 
-             <param name="mon">The month.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetTimeAfter(System.DateTimeOffset)">
 
-             <summary>
 
-             Gets the next fire time after the given time.
 
-             </summary>
 
-             <param name="afterTimeUtc">The UTC time to start searching from.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.CreateDateTimeWithoutMillis(System.DateTimeOffset)">
 
-             <summary>
 
-             Creates the date time without milliseconds.
 
-             </summary>
 
-             <param name="time">The time.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.SetCalendarHour(System.DateTimeOffset,System.Int32)">
 
-             <summary>
 
-             Advance the calendar to the particular hour paying particular attention
 
-             to daylight saving problems.
 
-             </summary>
 
-             <param name="date">The date.</param>
 
-             <param name="hour">The hour.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetTimeBefore(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Gets the time before.
 
-             </summary>
 
-             <param name="endTime">The end time.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetFinalFireTime">
 
-             <summary>
 
-             NOT YET IMPLEMENTED: Returns the final time that the 
 
-             <see cref="T:Quartz.CronExpression"/> will match.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.IsLeapYear(System.Int32)">
 
-             <summary>
 
-             Determines whether given year is a leap year.
 
-             </summary>
 
-             <param name="year">The year.</param>
 
-             <returns>
 
-             	<c>true</c> if the specified year is a leap year; otherwise, <c>false</c>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetLastDayOfMonth(System.Int32,System.Int32)">
 
-             <summary>
 
-             Gets the last day of month.
 
-             </summary>
 
-             <param name="monthNum">The month num.</param>
 
-             <param name="year">The year.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.Clone">
 
-             <summary>
 
-             Creates a new object that is a copy of the current instance.
 
-             </summary>
 
-             <returns>
 
-             A new object that is a copy of this instance.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.Equals(Quartz.CronExpression)">
 
-             <summary>
 
-             Determines whether the specified <see cref="T:Quartz.CronExpression"/> is equal to the current <see cref="T:Quartz.CronExpression"/>.
 
-             </summary>
 
-             <returns>
 
-             true if the specified <see cref="T:Quartz.CronExpression"/> is equal to the current <see cref="T:Quartz.CronExpression"/>; otherwise, false.
 
-             </returns>
 
-             <param name="other">The <see cref="T:Quartz.CronExpression"/> to compare with the current <see cref="T:Quartz.CronExpression"/>. </param>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.Equals(System.Object)">
 
-             <summary>
 
-             Determines whether the specified <see cref="T:System.Object"/> is equal to the current <see cref="T:System.Object"/>.
 
-             </summary>
 
-             <returns>
 
-             true if the specified <see cref="T:System.Object"/> is equal to the current <see cref="T:System.Object"/>; otherwise, false.
 
-             </returns>
 
-             <param name="obj">The <see cref="T:System.Object"/> to compare with the current <see cref="T:System.Object"/>. </param>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetHashCode">
 
-             <summary>
 
-             Serves as a hash function for a particular type. 
 
-             </summary>
 
-             <returns>
 
-             A hash code for the current <see cref="T:System.Object"/>.
 
-             </returns>
 
-             <filterpriority>2</filterpriority>
 
-         </member>
 
-         <member name="P:Quartz.CronExpression.TimeZone">
 
-             <summary>
 
-             Sets or gets the time zone for which the <see cref="T:Quartz.CronExpression"/> of this
 
-             <see cref="T:Quartz.ICronTrigger"/> will be resolved.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.CronExpression.CronExpressionString">
 
-             <summary>
 
-             Gets the cron expression string.
 
-             </summary>
 
-             <value>The cron expression string.</value>
 
-         </member>
 
-         <member name="T:Quartz.ValueSet">
 
-             <summary>
 
-             Helper class for cron expression handling.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.ValueSet.theValue">
 
-             <summary>
 
-             The value.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.ValueSet.pos">
 
-             <summary>
 
-             The position.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.CronScheduleBuilder">
 
-             <summary>
 
-             CronScheduleBuilder is a <see cref="T:Quartz.IScheduleBuilder"/> that defines
 
-             <see cref="T:Quartz.CronExpression"/>-based schedules for <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             Quartz provides a builder-style API for constructing scheduling-related
 
-             entities via a Domain-Specific Language (DSL).  The DSL can best be
 
-             utilized through the usage of static imports of the methods on the classes
 
-             <see cref="T:Quartz.TriggerBuilder"/>, <see cref="T:Quartz.JobBuilder"/>,
 
-             <see cref="T:Quartz.DateBuilder"/>, <see cref="T:Quartz.JobKey"/>, <see cref="T:Quartz.TriggerKey"/>
 
-             and the various <see cref="T:Quartz.IScheduleBuilder"/> implementations.
 
-             </para>
 
-             <para>
 
-             Client code can then use the DSL to write code such as this:
 
-             </para>
 
-             <code>
 
-             IJobDetail job = JobBuilder.Create<MyJob>()
 
-               .WithIdentity("myJob")
 
-               .Build();
 
-             ITrigger trigger = newTrigger()
 
-              .WithIdentity(triggerKey("myTrigger", "myTriggerGroup"))
 
-              .WithSimpleSchedule(x => x.WithIntervalInHours(1).RepeatForever())
 
-              .StartAt(DateBuilder.FutureDate(10, IntervalUnit.Minute))
 
-              .Build();
 
-             scheduler.scheduleJob(job, trigger);
 
-             </code>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.CronExpression"/>
 
-             <seealso cref="T:Quartz.ICronTrigger"/>
 
-             <seealso cref="T:Quartz.IScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.SimpleScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.CalendarIntervalScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.TriggerBuilder"/>
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.Build">
 
-             <summary>
 
-             Build the actual Trigger -- NOT intended to be invoked by end users,
 
-             but will rather be invoked by a TriggerBuilder which this
 
-             ScheduleBuilder is given to.
 
-             </summary>
 
-             <seealso cref="M:Quartz.TriggerBuilder.WithSchedule(Quartz.IScheduleBuilder)"/>
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.CronSchedule(System.String)">
 
-             <summary>
 
-             Create a CronScheduleBuilder with the given cron-expression - which
 
-             is presumed to b e valid cron expression (and hence only a RuntimeException
 
-             will be thrown if it is not).
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="cronExpression">the cron expression to base the schedule on.</param>
 
-             <returns>the new CronScheduleBuilder</returns>
 
-             <seealso cref="T:Quartz.CronExpression"/>
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.CronScheduleNoParseException(System.String)">
 
-             <summary>
 
-             Create a CronScheduleBuilder with the given cron-expression string - which
 
-             may not be a valid cron expression (and hence a ParseException will be thrown
 
-             f it is not).
 
-             </summary>
 
-             <param name="presumedValidCronExpression">the cron expression string to base the schedule on</param>
 
-             <returns>the new CronScheduleBuilder</returns>
 
-             <seealso cref="T:Quartz.CronExpression"/> 
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.CronSchedule(Quartz.CronExpression)">
 
-             <summary>
 
-             Create a CronScheduleBuilder with the given cron-expression.
 
-             </summary>
 
-             <param name="cronExpression">the cron expression to base the schedule on.</param>
 
-             <returns>the new CronScheduleBuilder</returns>
 
-             <seealso cref="T:Quartz.CronExpression"/> 
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.DailyAtHourAndMinute(System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a CronScheduleBuilder with a cron-expression that sets the
 
-             schedule to fire every day at the given time (hour and minute).
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="hour">the hour of day to fire</param>
 
-             <param name="minute">the minute of the given hour to fire</param>
 
-             <returns>the new CronScheduleBuilder</returns>
 
-             <seealso cref="T:Quartz.CronExpression"/>
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.AtHourAndMinuteOnGivenDaysOfWeek(System.Int32,System.Int32,System.DayOfWeek[])">
 
-             <summary>
 
-             Create a CronScheduleBuilder with a cron-expression that sets the
 
-             schedule to fire at the given day at the given time (hour and minute) on the given days of the week.
 
-             </summary>
 
-             <param name="hour">the hour of day to fire</param>
 
-             <param name="minute">the minute of the given hour to fire</param>
 
-             <param name="daysOfWeek">the days of the week to fire</param>
 
-             <returns>the new CronScheduleBuilder</returns>
 
-             <seealso cref="T:Quartz.CronExpression"/>
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.WeeklyOnDayAndHourAndMinute(System.DayOfWeek,System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a CronScheduleBuilder with a cron-expression that sets the
 
-             schedule to fire one per week on the given day at the given time
 
-             (hour and minute).
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="dayOfWeek">the day of the week to fire</param>
 
-             <param name="hour">the hour of day to fire</param>
 
-             <param name="minute">the minute of the given hour to fire</param>
 
-             <returns>the new CronScheduleBuilder</returns>
 
-             <seealso cref="T:Quartz.CronExpression"/>
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.MonthlyOnDayAndHourAndMinute(System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a CronScheduleBuilder with a cron-expression that sets the
 
-             schedule to fire one per month on the given day of month at the given
 
-             time (hour and minute).
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="dayOfMonth">the day of the month to fire</param>
 
-             <param name="hour">the hour of day to fire</param>
 
-             <param name="minute">the minute of the given hour to fire</param>
 
-             <returns>the new CronScheduleBuilder</returns>
 
-             <seealso cref="T:Quartz.CronExpression"/>
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.InTimeZone(System.TimeZoneInfo)">
 
-             <summary>
 
-             The <see cref="T:System.TimeZoneInfo"/> in which to base the schedule.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="tz">the time-zone for the schedule.</param>
 
-             <returns>the updated CronScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.CronExpression.TimeZone"/>
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.WithMisfireHandlingInstructionIgnoreMisfires">
 
-             <summary>
 
-             If the Trigger misfires, use the
 
-             <see cref="F:Quartz.MisfireInstruction.IgnoreMisfirePolicy"/> instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated CronScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.IgnoreMisfirePolicy"/>
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.WithMisfireHandlingInstructionDoNothing">
 
-             <summary>
 
-             If the Trigger misfires, use the <see cref="F:Quartz.MisfireInstruction.CronTrigger.DoNothing"/>
 
-             instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated CronScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.CronTrigger.DoNothing"/>
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.WithMisfireHandlingInstructionFireAndProceed">
 
-             <summary>
 
-             If the Trigger misfires, use the <see cref="F:Quartz.MisfireInstruction.CronTrigger.FireOnceNow"/>
 
-             instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated CronScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.CronTrigger.FireOnceNow"/>
 
-         </member>
 
-         <member name="T:Quartz.CronScheduleTriggerBuilderExtensions">
 
-             <summary>
 
-             Extension methods that attach <see cref="T:Quartz.CronScheduleBuilder"/> to <see cref="T:Quartz.TriggerBuilder"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.DailyTimeIntervalScheduleBuilder">
 
-             <summary>
 
-             A <see cref="T:Quartz.IScheduleBuilder"/> implementation that build schedule for DailyTimeIntervalTrigger.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             This builder provide an extra convenient method for you to set the trigger's EndTimeOfDay. You may
 
-             use either endingDailyAt() or EndingDailyAfterCount() to set the value. The later will auto calculate
 
-             your EndTimeOfDay by using the interval, IntervalUnit and StartTimeOfDay to perform the calculation.
 
-             </para>
 
-             <para>
 
-             When using EndingDailyAfterCount(), you should note that it is used to calculating EndTimeOfDay. So
 
-             if your startTime on the first day is already pass by a time that would not add up to the count you
 
-             expected, until the next day comes. Remember that DailyTimeIntervalTrigger will use StartTimeOfDay
 
-             and endTimeOfDay as fresh per each day!
 
-             </para>
 
-             <para>
 
-             Quartz provides a builder-style API for constructing scheduling-related
 
-             entities via a Domain-Specific Language (DSL).  The DSL can best be
 
-             utilized through the usage of static imports of the methods on the classes
 
-             <see cref="T:Quartz.TriggerBuilder"/>, <see cref="T:Quartz.JobBuilder"/>,
 
-             <see cref="T:Quartz.DateBuilder"/>, <see cref="T:Quartz.JobKey"/>, <see cref="T:Quartz.TriggerKey"/>
 
-             and the various <see cref="T:Quartz.IScheduleBuilder"/> implementations.
 
-             </para>
 
-             <para>Client code can then use the DSL to write code such as this:</para>
 
-             <code>
 
-                     IJobDetail job = JobBuilder.Create<MyJob>()
 
-                         .WithIdentity("myJob")
 
-                         .Build();
 
-                         
 
-                     ITrigger trigger = TriggerBuilder.Create() 
 
-                         .WithIdentity(triggerKey("myTrigger", "myTriggerGroup"))
 
-                         .WithDailyTimeIntervalSchedule(x => 
 
-                                    x.WithIntervalInMinutes(15)
 
-                                    .StartingDailyAt(TimeOfDay.HourAndMinuteOfDay(8, 0))
 
-                         .Build();
 
-                     
 
-                     scheduler.scheduleJob(job, trigger);
 
-             </code>
 
-             </remarks>
 
-             <author>James House</author>
 
-             <author>Zemian Deng saltnlight5@gmail.com</author>
 
-             <author>Nuno Maia (.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.DailyTimeIntervalScheduleBuilder.AllDaysOfTheWeek">
 
-             <summary>
 
-             A set of all days of the week.
 
-             </summary>
 
-             <remarks>
 
-             The set contains all values between <see cref="F:System.DayOfWeek.Sunday"/> and <see cref="F:System.DayOfWeek.Saturday"/>
 
-             </remarks>
 
-         </member>
 
-         <member name="F:Quartz.DailyTimeIntervalScheduleBuilder.MondayThroughFriday">
 
-             <summary>
 
-             A set of the business days of the week (for locales similar to the USA).
 
-             </summary>
 
-             <remarks>
 
-             The set contains all values between <see cref="F:System.DayOfWeek.Monday"/> and <see cref="F:System.DayOfWeek.Friday"/> 
 
-             </remarks>
 
-         </member>
 
-         <member name="F:Quartz.DailyTimeIntervalScheduleBuilder.SaturdayAndSunday">
 
-             <summary>
 
-             A set of the weekend days of the week (for locales similar to the USA).
 
-             </summary>
 
-             <remarks>
 
-             The set contains <see cref="F:System.DayOfWeek.Saturday"/> and <see cref="F:System.DayOfWeek.Sunday"/>
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.Create">
 
-             <summary>
 
-             Create a DailyTimeIntervalScheduleBuilder
 
-             </summary>
 
-             <returns>The new DailyTimeIntervalScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.Build">
 
-             <summary>
 
-             Build the actual Trigger -- NOT intended to be invoked by end users,
 
-             but will rather be invoked by a TriggerBuilder which this 
 
-             ScheduleBuilder is given to.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.WithInterval(System.Int32,Quartz.IntervalUnit)">
 
-             <summary>
 
-             Specify the time unit and interval for the Trigger to be produced.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="interval">the interval at which the trigger should repeat.</param>
 
-             <param name="unit"> the time unit (IntervalUnit) of the interval.</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatInterval"/>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.WithIntervalInSeconds(System.Int32)">
 
-             <summary>
 
-             Specify an interval in the IntervalUnit.Second that the produced
 
-             Trigger will repeat at.
 
-             </summary>
 
-             <param name="intervalInSeconds">The number of seconds at which the trigger should repeat.</param>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder></returns>
 
-             <see cref="P:Quartz.IDailyTimeIntervalTrigger.RepeatInterval"/>
 
-             <see cref="P:Quartz.IDailyTimeIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.WithIntervalInMinutes(System.Int32)">
 
-             <summary>
 
-             Specify an interval in the IntervalUnit.Minute that the produced
 
-             Trigger will repeat at.
 
-             </summary>
 
-             <param name="intervalInMinutes">The number of minutes at which the trigger should repeat.</param>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder></returns>
 
-             <see cref="P:Quartz.IDailyTimeIntervalTrigger.RepeatInterval"/>
 
-             <see cref="P:Quartz.IDailyTimeIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.WithIntervalInHours(System.Int32)">
 
-             <summary>
 
-             Specify an interval in the IntervalUnit.Hour that the produced
 
-             Trigger will repeat at.
 
-             </summary>
 
-             <param name="intervalInHours">The number of hours at which the trigger should repeat.</param>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder></returns>
 
-             <see cref="P:Quartz.IDailyTimeIntervalTrigger.RepeatInterval"/>
 
-             <see cref="P:Quartz.IDailyTimeIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.OnDaysOfTheWeek(Quartz.Collection.ISet{System.DayOfWeek})">
 
-             <summary>
 
-             Set the trigger to fire on the given days of the week.
 
-             </summary>
 
-             <param name="onDaysOfWeek">a Set containing the integers representing the days of the week, defined by <see cref="F:System.DayOfWeek.Sunday"/> - <see cref="F:System.DayOfWeek.Saturday"/>. 
 
-             </param>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.OnDaysOfTheWeek(System.DayOfWeek[])">
 
-             <summary>
 
-             Set the trigger to fire on the given days of the week.
 
-             </summary>
 
-             <param name="onDaysOfWeek">a variable length list of week days representing the days of the week</param>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.OnMondayThroughFriday">
 
-             <summary>
 
-             Set the trigger to fire on the days from Monday through Friday.
 
-             </summary>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.OnSaturdayAndSunday">
 
-             <summary>
 
-             Set the trigger to fire on the days Saturday and Sunday.
 
-             </summary>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.OnEveryDay">
 
-             <summary>
 
-             Set the trigger to fire on all days of the week.
 
-             </summary>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.StartingDailyAt(Quartz.TimeOfDay)">
 
-             <summary>
 
-             Set the trigger to begin firing each day at the given time.
 
-             </summary>
 
-             <param name="timeOfDayUtc"></param>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.EndingDailyAt(Quartz.TimeOfDay)">
 
-             <summary>
 
-             Set the startTimeOfDay for this trigger to end firing each day at the given time.
 
-             </summary>
 
-             <param name="timeOfDayUtc"></param>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.EndingDailyAfterCount(System.Int32)">
 
-             <summary>
 
-             Calculate and set the EndTimeOfDay using count, interval and StarTimeOfDay. This means
 
-             that these must be set before this method is call.
 
-             </summary>
 
-             <param name="count"></param>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.WithMisfireHandlingInstructionIgnoreMisfires">
 
-             <summary>
 
-             If the Trigger misfires, use the 
 
-             <see cref="F:Quartz.MisfireInstruction.IgnoreMisfirePolicy"/> instruction.
 
-             </summary>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.IgnoreMisfirePolicy"/>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.WithMisfireHandlingInstructionDoNothing">
 
-             <summary>
 
-             If the Trigger misfires, use the 
 
-             <see cref="F:Quartz.MisfireInstruction.DailyTimeIntervalTrigger.DoNothing"/> instruction.
 
-             </summary>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.DailyTimeIntervalTrigger.DoNothing"/>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.WithMisfireHandlingInstructionFireAndProceed">
 
-             <summary>
 
-             If the Trigger misfires, use the 
 
-             <see cref="F:Quartz.MisfireInstruction.DailyTimeIntervalTrigger.FireOnceNow"/> instruction.
 
-             </summary>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.DailyTimeIntervalTrigger.FireOnceNow"/>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.WithRepeatCount(System.Int32)">
 
-             <summary>
 
-             Set number of times for interval to repeat.
 
-             </summary>
 
-             <remarks>
 
-             Note: if you want total count = 1 (at start time) + repeatCount
 
-             </remarks>
 
-             <param name="repeatCount"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.InTimeZone(System.TimeZoneInfo)">
 
-             <summary>
 
-             TimeZone in which to base the schedule.
 
-             </summary>
 
-             <param name="timezone">the time-zone for the schedule</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.TimeZone"/>
 
-         </member>
 
-         <member name="T:Quartz.DailyTimeIntervalTriggerBuilderExtensions">
 
-             <summary>
 
-             Extension methods that attach <see cref="T:Quartz.DailyTimeIntervalScheduleBuilder"/> to <see cref="T:Quartz.TriggerBuilder"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.DateBuilder">
 
-             <summary>
 
-             DateBuilder is used to conveniently create
 
-             <see cref="T:System.DateTimeOffset"/> instances that meet particular criteria.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             Quartz provides a builder-style API for constructing scheduling-related
 
-             entities via a Domain-Specific Language (DSL).  The DSL can best be
 
-             utilized through the usage of static imports of the methods on the classes
 
-             <see cref="T:Quartz.TriggerBuilder"/>, <see cref="T:Quartz.JobBuilder"/>,
 
-             <see cref="T:Quartz.DateBuilder"/>, <see cref="T:Quartz.JobKey"/>, <see cref="T:Quartz.TriggerKey"/>
 
-             and the various <see cref="T:Quartz.IScheduleBuilder"/> implementations.
 
-             </para>
 
-             <para>Client code can then use the DSL to write code such as this:</para>
 
-             <code>
 
-             IJobDetail job = JobBuilder.Create<MyJob>()
 
-                 .WithIdentity("myJob")
 
-                 .Build();
 
-             ITrigger trigger = newTrigger()
 
-                 .WithIdentity(triggerKey("myTrigger", "myTriggerGroup"))
 
-                 .WithSimpleSchedule(x => x
 
-                     .WithIntervalInHours(1)
 
-                     .RepeatForever())
 
-                 .StartAt(DateBuilder.FutureDate(10, IntervalUnit.Minutes))
 
-                 .Build();
 
-             scheduler.scheduleJob(job, trigger);
 
-             </code>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.TriggerBuilder"/>
 
-             <seealso cref="T:Quartz.JobBuilder"/>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.#ctor">
 
-             <summary>
 
-             Create a DateBuilder, with initial settings for the current date 
 
-             and time in the system default timezone.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.#ctor(System.TimeZoneInfo)">
 
-             <summary>
 
-             Create a DateBuilder, with initial settings for the current date and time in the given timezone.
 
-             </summary>
 
-             <param name="tz"></param>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.NewDate">
 
-             <summary>
 
-             Create a DateBuilder, with initial settings for the current date and time in the system default timezone.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.NewDateInTimeZone(System.TimeZoneInfo)">
 
-             <summary>
 
-             Create a DateBuilder, with initial settings for the current date and time in the given timezone.
 
-             </summary>
 
-             <param name="tz">Time zone to use.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.Build">
 
-             <summary>
 
-             Build the <see cref="T:System.DateTimeOffset"/> defined by this builder instance. 
 
-             </summary>
 
-             <returns>New date time based on builder parameters.</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.AtHourOfDay(System.Int32)">
 
-             <summary>
 
-             Set the hour (0-23) for the Date that will be built by this builder.
 
-             </summary>
 
-             <param name="hour"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.AtMinute(System.Int32)">
 
-             <summary>
 
-             Set the minute (0-59) for the Date that will be built by this builder.
 
-             </summary>
 
-             <param name="minute"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.AtSecond(System.Int32)">
 
-             <summary>
 
-             Set the second (0-59) for the Date that will be built by this builder, and truncate the milliseconds to 000.
 
-             </summary>
 
-             <param name="second"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.OnDay(System.Int32)">
 
-             <summary>
 
-             Set the day of month (1-31) for the Date that will be built by this builder.
 
-             </summary>
 
-             <param name="day"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.InMonth(System.Int32)">
 
-             <summary>
 
-             Set the month (1-12) for the Date that will be built by this builder.
 
-             </summary>
 
-             <param name="month"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.InYear(System.Int32)">
 
-             <summary>
 
-             Set the year for the Date that will be built by this builder.
 
-             </summary>
 
-             <param name="year"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.InTimeZone(System.TimeZoneInfo)">
 
-             <summary>
 
-             Set the TimeZoneInfo for the Date that will be built by this builder (if "null", system default will be used)
 
-             </summary>
 
-             <param name="tz"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.TomorrowAt(System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Get a <see cref="T:System.DateTimeOffset"/> object that represents the given time, on
 
-             tomorrow's date.
 
-             </summary>
 
-             <param name="hour"></param>
 
-             <param name="minute"></param>
 
-             <param name="second"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.TodayAt(System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Get a <see cref="T:System.DateTimeOffset"/> object that represents the given time, on
 
-             today's date (equivalent to <see cref="M:Quartz.DateBuilder.DateOf(System.Int32,System.Int32,System.Int32)"/>.
 
-             </summary>
 
-             <param name="hour"></param>
 
-             <param name="minute"></param>
 
-             <param name="second"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.DateOf(System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Get a <see cref="T:System.DateTimeOffset"/> object that represents the given time, on today's date.
 
-             </summary>
 
-             <param name="second">The value (0-59) to give the seconds field of the date</param>
 
-             <param name="minute">The value (0-59) to give the minutes field of the date</param>
 
-             <param name="hour">The value (0-23) to give the hours field of the date</param>
 
-             <returns>the new date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.DateOf(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Get a <see cref="T:System.DateTimeOffset"/> object that represents the given time, on the
 
-             given date.
 
-             </summary>
 
-             <param name="second">The value (0-59) to give the seconds field of the date</param>
 
-             <param name="minute">The value (0-59) to give the minutes field of the date</param>
 
-             <param name="hour">The value (0-23) to give the hours field of the date</param>
 
-             <param name="dayOfMonth">The value (1-31) to give the day of month field of the date</param>
 
-             <param name="month">The value (1-12) to give the month field of the date</param>
 
-             <returns>the new date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.DateOf(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Get a <see cref="T:System.DateTimeOffset"/> object that represents the given time, on the
 
-             given date.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="second">The value (0-59) to give the seconds field of the date</param>
 
-             <param name="minute">The value (0-59) to give the minutes field of the date</param>
 
-             <param name="hour">The value (0-23) to give the hours field of the date</param>
 
-             <param name="dayOfMonth">The value (1-31) to give the day of month field of the date</param>
 
-             <param name="month">The value (1-12) to give the month field of the date</param>
 
-             <param name="year">The value (1970-2099) to give the year field of the date</param>
 
-             <returns>the new date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.EvenHourDateAfterNow">
 
-             <summary>
 
-             Returns a date that is rounded to the next even hour after the current time.
 
-             </summary>
 
-             <remarks>
 
-             For example a current time of 08:13:54 would result in a date
 
-             with the time of 09:00:00. If the date's time is in the 23rd hour, the
 
-             date's 'day' will be promoted, and the time will be set to 00:00:00.
 
-             </remarks>
 
-             <returns>the new rounded date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.EvenHourDate(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Returns a date that is rounded to the next even hour above the given date.
 
-             </summary>
 
-             <remarks>
 
-             For example an input date with a time of 08:13:54 would result in a date
 
-             with the time of 09:00:00. If the date's time is in the 23rd hour, the
 
-             date's 'day' will be promoted, and the time will be set to 00:00:00.
 
-             </remarks>
 
-             <param name="date">the Date to round, if <see langword="null" /> the current time will
 
-             be used</param>
 
-             <returns>the new rounded date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.EvenHourDateBefore(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Returns a date that is rounded to the previous even hour below the given date.
 
-             </summary>
 
-             <remarks>
 
-             For example an input date with a time of 08:13:54 would result in a date
 
-             with the time of 08:00:00.
 
-             </remarks>
 
-             <param name="date">the Date to round, if <see langword="null" /> the current time will
 
-             be used</param>
 
-             <returns>the new rounded date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.EvenMinuteDateAfterNow">
 
-             <summary>
 
-             <para>
 
-             Returns a date that is rounded to the next even minute after the current time.
 
-             </para>
 
-             </summary>
 
-             <remarks>
 
-             For example a current time of 08:13:54 would result in a date
 
-             with the time of 08:14:00. If the date's time is in the 59th minute,
 
-             then the hour (and possibly the day) will be promoted.
 
-             </remarks>
 
-             <returns>the new rounded date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.EvenMinuteDate(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Returns a date that is rounded to the next even minute above the given date.
 
-             </summary>
 
-             <remarks>
 
-             For example an input date with a time of 08:13:54 would result in a date
 
-             with the time of 08:14:00. If the date's time is in the 59th minute,
 
-             then the hour (and possibly the day) will be promoted.
 
-             </remarks>
 
-             <param name="date">The Date to round, if <see langword="null" /> the current time will  be used</param>
 
-             <returns>The new rounded date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.EvenMinuteDateBefore(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Returns a date that is rounded to the previous even minute below the given date.
 
-             </summary>
 
-             <remarks>
 
-             For example an input date with a time of 08:13:54 would result in a date
 
-             with the time of 08:13:00.
 
-             </remarks>
 
-             <param name="date">the Date to round, if <see langword="null" /> the current time will
 
-             be used</param>
 
-             <returns>the new rounded date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.EvenSecondDateAfterNow">
 
-             <summary>
 
-             Returns a date that is rounded to the next even second after the current time.
 
-             </summary>
 
-             <returns>the new rounded date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.EvenSecondDate(System.DateTimeOffset)">
 
-             <summary>
 
-             Returns a date that is rounded to the next even second above the given date.
 
-             </summary>
 
-             <param name="date"></param>
 
-             the Date to round, if <see langword="null" /> the current time will
 
-             be used
 
-             <returns>the new rounded date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.EvenSecondDateBefore(System.DateTimeOffset)">
 
-             <summary>
 
-             Returns a date that is rounded to the previous even second below the
 
-             given date.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             For example an input date with a time of 08:13:54.341 would result in a
 
-             date with the time of 08:13:00.000.
 
-             </para>
 
-             </remarks>
 
-             <param name="date"></param>
 
-             the Date to round, if <see langword="null" /> the current time will
 
-             be used
 
-             <returns>the new rounded date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.NextGivenMinuteDate(System.Nullable{System.DateTimeOffset},System.Int32)">
 
-             <summary>
 
-             Returns a date that is rounded to the next even multiple of the given
 
-             minute.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             For example an input date with a time of 08:13:54, and an input
 
-             minute-base of 5 would result in a date with the time of 08:15:00. The
 
-             same input date with an input minute-base of 10 would result in a date
 
-             with the time of 08:20:00. But a date with the time 08:53:31 and an
 
-             input minute-base of 45 would result in 09:00:00, because the even-hour
 
-             is the next 'base' for 45-minute intervals.
 
-             </para>
 
-             <para>
 
-             More examples: <table>
 
-             <tr>
 
-             <th>Input Time</th>
 
-             <th>Minute-Base</th>
 
-             <th>Result Time</th>
 
-             </tr>
 
-             <tr>
 
-             <td>11:16:41</td>
 
-             <td>20</td>
 
-             <td>11:20:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:36:41</td>
 
-             <td>20</td>
 
-             <td>11:40:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:46:41</td>
 
-             <td>20</td>
 
-             <td>12:00:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:26:41</td>
 
-             <td>30</td>
 
-             <td>11:30:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:36:41</td>
 
-             <td>30</td>
 
-             <td>12:00:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:16:41</td>
 
-             <td>17</td>
 
-             <td>11:17:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:17:41</td>
 
-             <td>17</td>
 
-             <td>11:34:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:52:41</td>
 
-             <td>17</td>
 
-             <td>12:00:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:52:41</td>
 
-             <td>5</td>
 
-             <td>11:55:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:57:41</td>
 
-             <td>5</td>
 
-             <td>12:00:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:17:41</td>
 
-             <td>0</td>
 
-             <td>12:00:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:17:41</td>
 
-             <td>1</td>
 
-             <td>11:08:00</td>
 
-             </tr>
 
-             </table>
 
-             </para>
 
-             </remarks>
 
-             <param name="date"></param>
 
-             the Date to round, if <see langword="null"/> the current time will
 
-             be used
 
-             <param name="minuteBase"></param>
 
-             the base-minute to set the time on
 
-             <returns>the new rounded date</returns>
 
-             <seealso cref="M:Quartz.DateBuilder.NextGivenSecondDate(System.Nullable{System.DateTimeOffset},System.Int32)"/>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.NextGivenSecondDate(System.Nullable{System.DateTimeOffset},System.Int32)">
 
-             <summary>
 
-             Returns a date that is rounded to the next even multiple of the given
 
-             minute.
 
-             </summary>
 
-             <remarks>
 
-             The rules for calculating the second are the same as those for
 
-             calculating the minute in the method <see cref="M:Quartz.DateBuilder.NextGivenMinuteDate(System.Nullable{System.DateTimeOffset},System.Int32)"/>.
 
-             </remarks>
 
-             <param name="date">the Date to round, if <see langword="null"/> the current time will</param>
 
-             be used
 
-             <param name="secondBase">the base-second to set the time on</param>
 
-             <returns>the new rounded date</returns>
 
-             <seealso cref="M:Quartz.DateBuilder.NextGivenMinuteDate(System.Nullable{System.DateTimeOffset},System.Int32)"/>
 
-         </member>
 
-         <member name="T:Quartz.DisallowConcurrentExecutionAttribute">
 
-             <summary>
 
-             An attribute that marks a <see cref="T:Quartz.IJob"/> class as one that must not have multiple
 
-             instances executed concurrently (where instance is based-upon a <see cref="T:Quartz.IJobDetail"/> 
 
-             definition - or in other words based upon a <see cref="T:Quartz.JobKey"/>. 
 
-             </summary>
 
-             <remarks>
 
-             <para>This can be used in lieu of implementing the StatefulJob marker interface that 
 
-             was used prior to Quartz 2.0</para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.PersistJobDataAfterExecutionAttribute"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.IInterruptableJob">
 
-             <summary>
 
-             The interface to be implemented by <see cref="T:Quartz.IJob"/>s that provide a 
 
-             mechanism for having their execution interrupted.  It is NOT a requirement
 
-             for jobs to implement this interface - in fact, for most people, none of
 
-             their jobs will.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The means of actually interrupting the Job must be implemented within the
 
-             <see cref="T:Quartz.IJob"/> itself (the <see cref="M:Quartz.IInterruptableJob.Interrupt"/> method of this 
 
-             interface is simply a means for the scheduler to inform the <see cref="T:Quartz.IJob"/>
 
-             that a request has been made for it to be interrupted). The mechanism that
 
-             your jobs use to interrupt themselves might vary between implementations.
 
-             However the principle idea in any implementation should be to have the
 
-             body of the job's <see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> periodically check some flag to
 
-             see if an interruption has been requested, and if the flag is set, somehow
 
-             abort the performance of the rest of the job's work.  An example of 
 
-             interrupting a job can be found in the source for the class Example7's DumbInterruptableJob 
 
-             It is legal to use
 
-             some combination of <see cref="M:System.Threading.Monitor.Wait(System.Object)"/> and <see cref="M:System.Threading.Monitor.Pulse(System.Object)"/> 
 
-             synchronization within <see cref="M:System.Threading.Thread.Interrupt"/> and <see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/>
 
-             in order to have the <see cref="M:System.Threading.Thread.Interrupt"/> method block until the
 
-             <see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> signals that it has noticed the set flag.
 
-             </para>
 
-             
 
-             <para>
 
-             If the Job performs some form of blocking I/O or similar functions, you may
 
-             want to consider having the <see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> method store a
 
-             reference to the calling <see cref="T:System.Threading.Thread"/> as a member variable.  Then the
 
-             implementation of this interfaces <see cref="M:System.Threading.Thread.Interrupt"/> method can call 
 
-             <see cref="M:System.Threading.Thread.Interrupt"/> on that Thread.   Before attempting this, make
 
-             sure that you fully understand what <see cref="M:System.Threading.Thread.Interrupt"/> 
 
-             does and doesn't do.  Also make sure that you clear the Job's member 
 
-             reference to the Thread when the Execute(..) method exits (preferably in a
 
-             <see langword="finally"/> block.
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="M:Quartz.IScheduler.Interrupt(Quartz.JobKey)"/>
 
-             <seealso cref="M:Quartz.IScheduler.Interrupt(System.String)"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.IInterruptableJob.Interrupt">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a user
 
-             interrupts the <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-             <returns> void (nothing) if job interrupt is successful.</returns>
 
-         </member>
 
-         <member name="T:Quartz.IntervalUnit">
 
-             <summary>
 
-             Supported interval units used by <see cref="T:Quartz.ICalendarIntervalTrigger"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.IStatefulJob">
 
-             <summary>
 
-             A marker interface for <see cref="T:Quartz.IJobDetail"/> s that
 
-             wish to have their state maintained between executions.
 
-             </summary>
 
-             <remarks>
 
-             <see cref="T:Quartz.IStatefulJob"/> instances follow slightly different rules from
 
-             regular <see cref="T:Quartz.IJob"/> instances. The key difference is that their
 
-             associated <see cref="T:Quartz.JobDataMap"/> is re-persisted after every
 
-             execution of the job, thus preserving state for the next execution. The
 
-             other difference is that stateful jobs are not allowed to Execute
 
-             concurrently, which means new triggers that occur before the completion of
 
-             the <see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> method will be delayed.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.DisallowConcurrentExecutionAttribute"/>
 
-             <seealso cref="T:Quartz.PersistJobDataAfterExecutionAttribute"/>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.IJobDetail"/>
 
-             <seealso cref="T:Quartz.JobDataMap"/>
 
-             <seealso cref="T:Quartz.IScheduler"/> 
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.JobBuilder">
 
-             <summary>
 
-             JobBuilder is used to instantiate <see cref="T:Quartz.IJobDetail"/>s.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The builder will always try to keep itself in a valid state, with 
 
-             reasonable defaults set for calling Build() at any point.  For instance
 
-             if you do not invoke <i>WithIdentity(..)</i> a job name will be generated
 
-             for you.
 
-             </para>
 
-             <para>
 
-             Quartz provides a builder-style API for constructing scheduling-related
 
-             entities via a Domain-Specific Language (DSL).  The DSL can best be
 
-             utilized through the usage of static imports of the methods on the classes
 
-             <see cref="T:Quartz.TriggerBuilder"/>, <see cref="T:Quartz.JobBuilder"/>,
 
-             <see cref="T:Quartz.DateBuilder"/>, <see cref="T:Quartz.JobKey"/>, <see cref="T:Quartz.TriggerKey"/>
 
-             and the various <see cref="T:Quartz.IScheduleBuilder"/> implementations.
 
-             </para>
 
-             <para>
 
-             Client code can then use the DSL to write code such as this:
 
-             </para>
 
-             <code>
 
-                     IJobDetail job = JobBuilder.Create<MyJob>()
 
-                         .WithIdentity("myJob")
 
-                         .Build();
 
-                         
 
-                     ITrigger trigger = TriggerBuilder.Create() 
 
-                         .WithIdentity("myTrigger", "myTriggerGroup")
 
-                         .WithSimpleSchedule(x => x.WithIntervalInHours(1).RepeatForever())
 
-                         .StartAt(DateBuilder.FutureDate(10, IntervalUnit.Minute))
 
-                         .Build();
 
-                     
 
-                     scheduler.scheduleJob(job, trigger);
 
-             </code>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.TriggerBuilder"/>
 
-             <seealso cref="T:Quartz.DateBuilder"/>
 
-             <seealso cref="T:Quartz.IJobDetail"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.Create">
 
-             <summary>
 
-             Create a JobBuilder with which to define a <see cref="T:Quartz.IJobDetail"/>.
 
-             </summary>
 
-             <returns>a new JobBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.Create(System.Type)">
 
-             <summary>
 
-             Create a JobBuilder with which to define a <see cref="T:Quartz.IJobDetail"/>,
 
-             and set the class name of the job to be executed.
 
-             </summary>
 
-             <returns>a new JobBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.Create``1">
 
-             <summary>
 
-             Create a JobBuilder with which to define a <see cref="T:Quartz.IJobDetail"/>,
 
-             and set the class name of the job to be executed.
 
-             </summary>
 
-             <returns>a new JobBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.Build">
 
-             <summary>
 
-             Produce the <see cref="T:Quartz.IJobDetail"/> instance defined by this JobBuilder.
 
-             </summary>
 
-             <returns>the defined JobDetail.</returns>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.WithIdentity(System.String)">
 
-             <summary>
 
-             Use a <see cref="T:Quartz.JobKey"/> with the given name and default group to
 
-             identify the JobDetail.
 
-             </summary>
 
-             <remarks>
 
-             <para>If none of the 'withIdentity' methods are set on the JobBuilder,
 
-             then a random, unique JobKey will be generated.</para>
 
-             </remarks>
 
-             <param name="name">the name element for the Job's JobKey</param>
 
-             <returns>the updated JobBuilder</returns>
 
-             <seealso cref="T:Quartz.JobKey"/> 
 
-             <seealso cref="P:Quartz.IJobDetail.Key"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.WithIdentity(System.String,System.String)">
 
-             <summary>
 
-             Use a <see cref="T:Quartz.JobKey"/> with the given name and group to
 
-             identify the JobDetail.
 
-             </summary>
 
-             <remarks>
 
-             <para>If none of the 'withIdentity' methods are set on the JobBuilder,
 
-             then a random, unique JobKey will be generated.</para>
 
-             </remarks>
 
-             <param name="name">the name element for the Job's JobKey</param>
 
-             <param name="group"> the group element for the Job's JobKey</param>
 
-             <returns>the updated JobBuilder</returns>
 
-             <seealso cref="T:Quartz.JobKey"/>
 
-             <seealso cref="P:Quartz.IJobDetail.Key"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.WithIdentity(Quartz.JobKey)">
 
-             <summary>
 
-             Use a <see cref="T:Quartz.JobKey"/> to identify the JobDetail.
 
-             </summary>
 
-             <remarks>
 
-             <para>If none of the 'withIdentity' methods are set on the JobBuilder,
 
-             then a random, unique JobKey will be generated.</para>
 
-             </remarks>
 
-             <param name="key">the Job's JobKey</param>
 
-             <returns>the updated JobBuilder</returns>
 
-             <seealso cref="T:Quartz.JobKey"/>
 
-             <seealso cref="P:Quartz.IJobDetail.Key"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.WithDescription(System.String)">
 
-             <summary>
 
-             Set the given (human-meaningful) description of the Job.
 
-             </summary>
 
-             <param name="description"> the description for the Job</param>
 
-             <returns>the updated JobBuilder</returns>
 
-             <seealso cref="P:Quartz.IJobDetail.Description"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.OfType``1">
 
-             <summary>
 
-             Set the class which will be instantiated and executed when a
 
-             Trigger fires that is associated with this JobDetail.
 
-             </summary>
 
-             <returns>the updated JobBuilder</returns>
 
-             <seealso cref="P:Quartz.IJobDetail.JobType"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.OfType(System.Type)">
 
-             <summary>
 
-             Set the class which will be instantiated and executed when a
 
-             Trigger fires that is associated with this JobDetail.
 
-             </summary>
 
-             <returns>the updated JobBuilder</returns>
 
-             <seealso cref="P:Quartz.IJobDetail.JobType"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.RequestRecovery">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> whether or not the job
 
-             should be re-executed if a 'recovery' or 'fail-over' situation is
 
-             encountered.
 
-             </summary>
 
-             <remarks>
 
-             If not explicitly set, the default value is <see langword="false"/>.
 
-             </remarks>
 
-             <returns>the updated JobBuilder</returns>
 
-             <seealso cref="P:Quartz.IJobDetail.RequestsRecovery"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.RequestRecovery(System.Boolean)">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> whether or not the job
 
-             should be re-executed if a 'recovery' or 'fail-over' situation is
 
-             encountered.
 
-             </summary>
 
-             <remarks>
 
-             If not explicitly set, the default value is <see langword="false"/>.
 
-             </remarks>
 
-             <param name="shouldRecover"></param>
 
-             <returns>the updated JobBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.StoreDurably">
 
-             <summary>
 
-             Whether or not the job should remain stored after it is
 
-             orphaned (no <see cref="T:Quartz.ITrigger"/>s point to it).
 
-             </summary>
 
-             <remarks>
 
-             If not explicitly set, the default value is <see langword="false"/>
 
-             - this method sets the value to <code>true</code>.
 
-             </remarks>
 
-             <returns>the updated JobBuilder</returns>
 
-             <seealso cref="P:Quartz.IJobDetail.Durable"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.StoreDurably(System.Boolean)">
 
-              <summary>
 
-              Whether or not the job should remain stored after it is
 
-              orphaned (no <see cref="T:Quartz.ITrigger"/>s point to it).
 
-              </summary>
 
-              <remarks>
 
-              If not explicitly set, the default value is <see langword="false"/>.
 
-              </remarks>
 
-              <param name="durability">the value to set for the durability property.</param>
 
-             <returns>the updated JobBuilder</returns>
 
-              <seealso cref="P:Quartz.IJobDetail.Durable"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.UsingJobData(System.String,System.String)">
 
-              <summary>
 
-              Add the given key-value pair to the JobDetail's <see cref="T:Quartz.JobDataMap"/>.
 
-              </summary>
 
-             <returns>the updated JobBuilder</returns>
 
-              <seealso cref="P:Quartz.IJobDetail.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.UsingJobData(System.String,System.Int32)">
 
-              <summary>
 
-              Add the given key-value pair to the JobDetail's <see cref="T:Quartz.JobDataMap"/>.
 
-              </summary>
 
-             <returns>the updated JobBuilder</returns>
 
-              <seealso cref="P:Quartz.IJobDetail.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.UsingJobData(System.String,System.Int64)">
 
-              <summary>
 
-              Add the given key-value pair to the JobDetail's <see cref="T:Quartz.JobDataMap"/>.
 
-              </summary>
 
-             <returns>the updated JobBuilder</returns>
 
-              <seealso cref="P:Quartz.IJobDetail.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.UsingJobData(System.String,System.Single)">
 
-              <summary>
 
-              Add the given key-value pair to the JobDetail's <see cref="T:Quartz.JobDataMap"/>.
 
-              </summary>
 
-             <returns>the updated JobBuilder</returns>
 
-              <seealso cref="P:Quartz.IJobDetail.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.UsingJobData(System.String,System.Double)">
 
-              <summary>
 
-              Add the given key-value pair to the JobDetail's <see cref="T:Quartz.JobDataMap"/>.
 
-              </summary>
 
-             <returns>the updated JobBuilder</returns>
 
-              <seealso cref="P:Quartz.IJobDetail.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.UsingJobData(System.String,System.Boolean)">
 
-              <summary>
 
-              Add the given key-value pair to the JobDetail's <see cref="T:Quartz.JobDataMap"/>.
 
-              </summary>
 
-             <returns>the updated JobBuilder</returns>
 
-              <seealso cref="P:Quartz.IJobDetail.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.UsingJobData(Quartz.JobDataMap)">
 
-              <summary>
 
-              Add all the data from the given <see cref="T:Quartz.JobDataMap"/> to the 
 
-              <see cref="T:Quartz.IJobDetail"/>'s <see cref="T:Quartz.JobDataMap"/>.
 
-              </summary>
 
-             <returns>the updated JobBuilder</returns>
 
-              <seealso cref="P:Quartz.IJobDetail.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.SetJobData(Quartz.JobDataMap)">
 
-             <summary>
 
-             Replace the <see cref="T:Quartz.IJobDetail"/>'s <see cref="T:Quartz.JobDataMap"/> with the
 
-             given <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-             <param name="newJobDataMap"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.JobDataMap">
 
-             <summary>
 
-             Holds state information for <see cref="T:Quartz.IJob"/> instances.
 
-             </summary>
 
-             <remarks>
 
-             <see cref="T:Quartz.JobDataMap"/> instances are stored once when the <see cref="T:Quartz.IJob"/>
 
-             is added to a scheduler. They are also re-persisted after every execution of
 
-             instances that have <see cref="T:Quartz.PersistJobDataAfterExecutionAttribute"/> present.
 
-             <para>
 
-             <see cref="T:Quartz.JobDataMap"/> instances can also be stored with a 
 
-             <see cref="T:Quartz.ITrigger"/>.  This can be useful in the case where you have a Job
 
-             that is stored in the scheduler for regular/repeated use by multiple 
 
-             Triggers, yet with each independent triggering, you want to supply the
 
-             Job with different data inputs.  
 
-             </para>
 
-             <para>
 
-             The <see cref="T:Quartz.IJobExecutionContext"/> passed to a Job at execution time 
 
-             also contains a convenience <see cref="T:Quartz.JobDataMap"/> that is the result
 
-             of merging the contents of the trigger's JobDataMap (if any) over the
 
-             Job's JobDataMap (if any).  
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.PersistJobDataAfterExecutionAttribute"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <seealso cref="T:Quartz.IJobExecutionContext"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.#ctor">
 
-             <summary>
 
-             Create an empty <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.#ctor(System.Collections.Generic.IDictionary{System.String,System.Object})">
 
-             <summary> 
 
-             Create a <see cref="T:Quartz.JobDataMap"/> with the given data.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.#ctor(System.Collections.IDictionary)">
 
-             <summary> 
 
-             Create a <see cref="T:Quartz.JobDataMap"/> with the given data.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.PutAsString(System.String,System.Boolean)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Boolean"/> value as a string version to the
 
-             <see cref="T:Quartz.IJob"/>'s data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.PutAsString(System.String,System.Char)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Char"/> value as a string version to the
 
-             <see cref="T:Quartz.IJob"/>'s data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.PutAsString(System.String,System.Double)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Double"/> value as a string version to the
 
-             <see cref="T:Quartz.IJob"/>'s data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.PutAsString(System.String,System.Single)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Single"/> value as a string version to the
 
-             <see cref="T:Quartz.IJob"/>'s data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.PutAsString(System.String,System.Int32)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Int32"/> value as a string version to the
 
-             <see cref="T:Quartz.IJob"/>'s data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.PutAsString(System.String,System.Int64)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Int64"/> value as a string version to the
 
-             <see cref="T:Quartz.IJob"/>'s data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.PutAsString(System.String,System.DateTime)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.DateTime"/> value as a string version to the
 
-             <see cref="T:Quartz.IJob"/>'s data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.PutAsString(System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.DateTimeOffset"/> value as a string version to the
 
-             <see cref="T:Quartz.IJob"/>'s data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.PutAsString(System.String,System.TimeSpan)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.TimeSpan"/> value as a string version to the
 
-             <see cref="T:Quartz.IJob"/>'s data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetIntValueFromString(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Int32"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetIntValue(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Int32"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetBooleanValueFromString(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Boolean"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetBooleanValue(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Boolean"/> value from the 
 
-             <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetCharFromString(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Char"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetDoubleValueFromString(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Double"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetDoubleValue(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Double"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetFloatValueFromString(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Single"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetFloatValue(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Single"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetLongValueFromString(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Int64"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetDateTimeValueFromString(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.DateTime"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetDateTimeOffsetValueFromString(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.DateTimeOffset"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetTimeSpanValueFromString(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.TimeSpan"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetLongValue(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Int64"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetDateTimeValue(System.String)">
 
-             <summary>
 
-             Gets the date time.
 
-             </summary>
 
-             <param name="key">The key.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetDateTimeOffsetValue(System.String)">
 
-             <summary>
 
-             Gets the date time offset.
 
-             </summary>
 
-             <param name="key">The key.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetTimeSpanValue(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.TimeSpan"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.JobExecutionException">
 
-             <summary>
 
-             An exception that can be thrown by a <see cref="T:Quartz.IJob"/>
 
-             to indicate to the Quartz <see cref="T:Quartz.IScheduler"/> that an error
 
-             occurred while executing, and whether or not the <see cref="T:Quartz.IJob"/> requests
 
-             to be re-fired immediately (using the same <see cref="T:Quartz.IJobExecutionContext"/>,
 
-             or whether it wants to be unscheduled.
 
-             </summary>
 
-             <remarks>
 
-             Note that if the flag for 'refire immediately' is set, the flags for
 
-             unscheduling the Job are ignored.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.IJobExecutionContext"/>
 
-             <seealso cref="T:Quartz.SchedulerException"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.JobExecutionException.#ctor">
 
-             <summary>
 
-             Create a JobExcecutionException, with the 're-fire immediately' flag set
 
-             to <see langword="false" />.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobExecutionException.#ctor(System.Exception)">
 
-             <summary>
 
-             Create a JobExcecutionException, with the given cause.
 
-             </summary>
 
-             <param name="cause">The cause.</param>
 
-         </member>
 
-         <member name="M:Quartz.JobExecutionException.#ctor(System.String)">
 
-             <summary>
 
-             Create a JobExcecutionException, with the given message.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobExecutionException.#ctor(System.String,System.Exception)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.JobExecutionException"/> class.
 
-             </summary>
 
-             <param name="msg">The message.</param>
 
-             <param name="cause">The original cause.</param>
 
-         </member>
 
-         <member name="M:Quartz.JobExecutionException.#ctor(System.Boolean)">
 
-             <summary>
 
-             Create a JobExcecutionException with the 're-fire immediately' flag set
 
-             to the given value.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobExecutionException.#ctor(System.Exception,System.Boolean)">
 
-             <summary>
 
-             Create a JobExcecutionException with the given underlying exception, and
 
-             the 're-fire immediately' flag set to the given value.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobExecutionException.#ctor(System.String,System.Exception,System.Boolean)">
 
-             <summary>
 
-             Create a JobExcecutionException with the given message, and underlying
 
-             exception, and the 're-fire immediately' flag set to the given value.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobExecutionException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.JobExecutionException"/> class.
 
-             </summary>
 
-             <param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"></see> that holds the serialized object data about the exception being thrown.</param>
 
-             <param name="context">The <see cref="T:System.Runtime.Serialization.StreamingContext"></see> that contains contextual information about the source or destination.</param>
 
-             <exception cref="T:System.Runtime.Serialization.SerializationException">The class name is null or <see cref="P:System.Exception.HResult"></see> is zero (0). </exception>
 
-             <exception cref="T:System.ArgumentNullException">The info parameter is null. </exception>
 
-         </member>
 
-         <member name="M:Quartz.JobExecutionException.ToString">
 
-             <summary>
 
-             Creates and returns a string representation of the current exception.
 
-             </summary>
 
-             <returns>
 
-             A string representation of the current exception.
 
-             </returns>
 
-             <PermissionSet><IPermission class="System.Security.Permissions.FileIOPermission, mscorlib, Version=2.0.3600.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" PathDiscovery="*AllFiles*"/></PermissionSet>
 
-         </member>
 
-         <member name="P:Quartz.JobExecutionException.UnscheduleFiringTrigger">
 
-             <summary>
 
-             Gets or sets a value indicating whether to unschedule firing trigger.
 
-             </summary>
 
-             <value>
 
-             	<c>true</c> if firing trigger should be unscheduled; otherwise, <c>false</c>.
 
-             </value>
 
-         </member>
 
-         <member name="P:Quartz.JobExecutionException.UnscheduleAllTriggers">
 
-             <summary>
 
-             Gets or sets a value indicating whether to unschedule all triggers.
 
-             </summary>
 
-             <value>
 
-             	<c>true</c> if all triggers should be unscheduled; otherwise, <c>false</c>.
 
-             </value>
 
-         </member>
 
-         <member name="P:Quartz.JobExecutionException.RefireImmediately">
 
-             <summary>
 
-             Gets or sets a value indicating whether to refire immediately.
 
-             </summary>
 
-             <value><c>true</c> if to refire immediately; otherwise, <c>false</c>.</value>
 
-         </member>
 
-         <member name="T:Quartz.JobKey">
 
-             <summary>
 
-             Uniquely identifies a <see cref="T:Quartz.IJobDetail"/>.
 
-             </summary>
 
-             <remarks>
 
-             <para>Keys are composed of both a name and group, and the name must be unique
 
-             within the group.  If only a group is specified then the default group
 
-             name will be used.</para> 
 
-             
 
-             <para>Quartz provides a builder-style API for constructing scheduling-related
 
-             entities via a Domain-Specific Language (DSL).  The DSL can best be
 
-             utilized through the usage of static imports of the methods on the classes
 
-             <see cref="T:Quartz.TriggerBuilder"/>, <see cref="T:Quartz.JobBuilder"/>, 
 
-             <see cref="T:Quartz.DateBuilder"/>, <see cref="T:Quartz.JobKey"/>, <see cref="T:Quartz.TriggerKey"/> 
 
-             and the various <see cref="T:Quartz.IScheduleBuilder"/> implementations.</para>
 
-             
 
-             <para>Client code can then use the DSL to write code such as this:</para>
 
-             <code>
 
-             IJobDetail job = JobBuilder.Create<MyJob>()
 
-                 .WithIdentity("myJob")
 
-                 .Build();
 
-             ITrigger trigger = TriggerBuilder.Create()
 
-                 .WithIdentity("myTrigger", "myTriggerGroup")
 
-                 .WithSimpleSchedule(x => x
 
-                     .WithIntervalInHours(1)
 
-                     .RepeatForever())
 
-                 .StartAt(DateBuilder.FutureDate(10, IntervalUnit.Minute))
 
-                 .Build();
 
-             scheduler.scheduleJob(job, trigger);
 
-             </code>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="F:Quartz.Util.Key`1.DefaultGroup"/>
 
-         </member>
 
-         <member name="T:Quartz.MisfireInstruction">
 
-             <summary>
 
-              Misfire instructions.
 
-             </summary>
 
-              <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.InstructionNotSet">
 
-             <summary>
 
-             Instruction not set (yet).
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.SmartPolicy">
 
-             <summary>
 
-             Use smart policy.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.IgnoreMisfirePolicy">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that the
 
-             <see cref="T:Quartz.ITrigger"/> will never be evaluated for a misfire situation,
 
-             and that the scheduler will simply try to fire it as soon as it can,
 
-             and then update the Trigger as if it had fired at the proper time.
 
-             </summary>
 
-             <remarks>
 
-             NOTE: if a trigger uses this instruction, and it has missed 
 
-             several of its scheduled firings, then several rapid firings may occur 
 
-             as the trigger attempt to catch back up to where it would have been. 
 
-             For example, a SimpleTrigger that fires every 15 seconds which has 
 
-             misfired for 5 minutes will fire 20 times once it gets the chance to 
 
-             fire.
 
-             </remarks>
 
-         </member>
 
-         <member name="T:Quartz.MisfireInstruction.SimpleTrigger">
 
-             <summary>
 
-             Misfire policy settings for SimpleTrigger.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.SimpleTrigger.FireNow">
 
-             <summary> 
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.ISimpleTrigger"/> wants to be fired
 
-             now by <see cref="T:Quartz.IScheduler"/>.
 
-             <para>
 
-             <i>NOTE:</i> This instruction should typically only be used for
 
-             'one-shot' (non-repeating) Triggers. If it is used on a trigger with a
 
-             repeat count > 0 then it is equivalent to the instruction 
 
-             <see cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNowWithRemainingRepeatCount"/>.
 
-             </para>
 
-             </summary>		
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNowWithExistingRepeatCount">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.ISimpleTrigger"/> wants to be
 
-             re-scheduled to 'now' (even if the associated <see cref="T:Quartz.ICalendar"/>
 
-             excludes 'now') with the repeat count left as-is.   This does obey the
 
-             <see cref="T:Quartz.ITrigger"/> end-time however, so if 'now' is after the
 
-             end-time the <see cref="T:Quartz.ITrigger"/> will not fire again.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             <i>NOTE:</i> Use of this instruction causes the trigger to 'forget'
 
-             the start-time and repeat-count that it was originally setup with (this
 
-             is only an issue if you for some reason wanted to be able to tell what
 
-             the original values were at some later time).
 
-             </para>
 
-             </remarks>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNowWithRemainingRepeatCount">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.ISimpleTrigger"/> wants to be
 
-             re-scheduled to 'now' (even if the associated <see cref="T:Quartz.ICalendar"/>
 
-             excludes 'now') with the repeat count set to what it would be, if it had
 
-             not missed any firings. This does obey the <see cref="T:Quartz.ITrigger"/> end-time 
 
-             however, so if 'now' is after the end-time the <see cref="T:Quartz.ITrigger"/> will 
 
-             not fire again.
 
-             
 
-             <para>
 
-             <i>NOTE:</i> Use of this instruction causes the trigger to 'forget'
 
-             the start-time and repeat-count that it was originally setup with.
 
-             Instead, the repeat count on the trigger will be changed to whatever
 
-             the remaining repeat count is (this is only an issue if you for some
 
-             reason wanted to be able to tell what the original values were at some
 
-             later time).
 
-             </para>
 
-             
 
-             <para>
 
-             <i>NOTE:</i> This instruction could cause the <see cref="T:Quartz.ITrigger"/>
 
-             to go to the 'COMPLETE' state after firing 'now', if all the
 
-             repeat-fire-times where missed.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNextWithRemainingCount">
 
-             <summary> 
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.ISimpleTrigger"/> wants to be
 
-             re-scheduled to the next scheduled time after 'now' - taking into
 
-             account any associated <see cref="T:Quartz.ICalendar"/>, and with the
 
-             repeat count set to what it would be, if it had not missed any firings.
 
-             </summary>
 
-             <remarks>
 
-             <i>NOTE/WARNING:</i> This instruction could cause the <see cref="T:Quartz.ITrigger"/>
 
-             to go directly to the 'COMPLETE' state if all fire-times where missed.
 
-             </remarks>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNextWithExistingCount">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.ISimpleTrigger"/> wants to be
 
-             re-scheduled to the next scheduled time after 'now' - taking into
 
-             account any associated <see cref="T:Quartz.ICalendar"/>, and with the
 
-             repeat count left unchanged.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             <i>NOTE/WARNING:</i> This instruction could cause the <see cref="T:Quartz.ITrigger"/>
 
-             to go directly to the 'COMPLETE' state if all the end-time of the trigger 
 
-             has arrived.
 
-             </para>
 
-             </remarks>
 
-         </member>
 
-         <member name="T:Quartz.MisfireInstruction.CronTrigger">
 
-             <summary>
 
-             misfire instructions for CronTrigger
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.CronTrigger.FireOnceNow">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.ICronTrigger"/> wants to be fired now
 
-             by <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.CronTrigger.DoNothing">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.ICronTrigger"/> wants to have it's
 
-             next-fire-time updated to the next time in the schedule after the
 
-             current time (taking into account any associated <see cref="T:Quartz.ICalendar"/>,
 
-             but it does not want to be fired now.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.MisfireInstruction.CalendarIntervalTrigger">
 
-             <summary>
 
-             Misfire instructions for DateIntervalTrigger
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.CalendarIntervalTrigger.FireOnceNow">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.ICalendarIntervalTrigger"/> wants to be 
 
-             fired now by <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.CalendarIntervalTrigger.DoNothing">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.ICalendarIntervalTrigger"/> wants to have it's
 
-             next-fire-time updated to the next time in the schedule after the
 
-             current time (taking into account any associated <see cref="T:Quartz.ICalendar"/>,
 
-             but it does not want to be fired now.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.MisfireInstruction.DailyTimeIntervalTrigger">
 
-             <summary>
 
-             Misfire instructions for DailyTimeIntervalTrigger
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.DailyTimeIntervalTrigger.FireOnceNow">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> wants to be
 
-             fired now by <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.DailyTimeIntervalTrigger.DoNothing">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.MisfireInstruction.DailyTimeIntervalTrigger"/> wants to have it's
 
-             next-fire-time updated to the next time in the schedule after the
 
-             current time (taking into account any associated <see cref="T:Quartz.ICalendar"/>,
 
-             but it does not want to be fired now.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.ObjectAlreadyExistsException">
 
-             <summary>
 
-             An exception that is thrown to indicate that an attempt to store a new
 
-             object (i.e. <see cref="T:Quartz.IJobDetail"/>,<see cref="T:Quartz.ITrigger"/>
 
-             or <see cref="T:Quartz.ICalendar"/>) in a <see cref="T:Quartz.IScheduler"/>
 
-             failed, because one with the same name and group already exists.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.ObjectAlreadyExistsException.#ctor(System.String)">
 
-             <summary> <para>
 
-             Create a <see cref="T:Quartz.ObjectAlreadyExistsException"/> with the given
 
-             message.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ObjectAlreadyExistsException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.ObjectAlreadyExistsException"/> class.
 
-             </summary>
 
-             <param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"></see> that holds the serialized object data about the exception being thrown.</param>
 
-             <param name="context">The <see cref="T:System.Runtime.Serialization.StreamingContext"></see> that contains contextual information about the source or destination.</param>
 
-             <exception cref="T:System.Runtime.Serialization.SerializationException">The class name is null or <see cref="P:System.Exception.HResult"></see> is zero (0). </exception>
 
-             <exception cref="T:System.ArgumentNullException">The info parameter is null. </exception>
 
-         </member>
 
-         <member name="M:Quartz.ObjectAlreadyExistsException.#ctor(Quartz.IJobDetail)">
 
-             <summary> <para>
 
-             Create a <see cref="T:Quartz.ObjectAlreadyExistsException"/> and auto-generate a
 
-             message using the name/group from the given <see cref="T:Quartz.IJobDetail"/>.
 
-             </para>
 
-             
 
-             <para>
 
-             The message will read: <br/>"Unable to store Job with name: '__' and
 
-             group: '__', because one already exists with this identification."
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ObjectAlreadyExistsException.#ctor(Quartz.ITrigger)">
 
-             <summary> <para>
 
-             Create a <see cref="T:Quartz.ObjectAlreadyExistsException"/> and auto-generate a
 
-             message using the name/group from the given <see cref="T:Quartz.ITrigger"/>.
 
-             </para>
 
-             
 
-             <para>
 
-             The message will read: <br/>"Unable to store Trigger with name: '__' and
 
-             group: '__', because one already exists with this identification."
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.PersistJobDataAfterExecutionAttribute">
 
-              <summary>
 
-              An attribute that marks a <see cref="T:Quartz.IJob"/> class as one that makes updates to its
 
-              <see cref="T:Quartz.JobDataMap"/> during execution, and wishes the scheduler to re-store the
 
-              <see cref="T:Quartz.JobDataMap"/> when execution completes. 
 
-              </summary>
 
-              <remarks>
 
-              <para>
 
-              Jobs that are marked with this annotation should also seriously consider
 
-              using the <see cref="T:Quartz.DisallowConcurrentExecutionAttribute"/> attribute, to avoid data
 
-              storage race conditions with concurrently executing job instances.
 
-              </para>
 
-              <para>
 
-              This can be used in lieu of implementing the StatefulJob marker interface that 
 
-              was used prior to Quartz 2.0
 
-              </para>
 
-             </remarks>
 
-              <seealso cref="T:Quartz.DisallowConcurrentExecutionAttribute"/>
 
-              <author>James House</author>
 
-              <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.SchedulerConfigException">
 
-             <summary>
 
-             An exception that is thrown to indicate that there is a misconfiguration of
 
-             the <see cref="T:Quartz.ISchedulerFactory"/>- or one of the components it
 
-             configures.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerConfigException.#ctor(System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.JobPersistenceException"/> with the given message.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerConfigException.#ctor(System.String,System.Exception)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.JobPersistenceException"/> with the given message
 
-             and cause.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerConfigException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.SchedulerConfigException"/> class.
 
-             </summary>
 
-             <param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"></see> that holds the serialized object data about the exception being thrown.</param>
 
-             <param name="context">The <see cref="T:System.Runtime.Serialization.StreamingContext"></see> that contains contextual information about the source or destination.</param>
 
-             <exception cref="T:System.Runtime.Serialization.SerializationException">The class name is null or <see cref="P:System.Exception.HResult"></see> is zero (0). </exception>
 
-             <exception cref="T:System.ArgumentNullException">The info parameter is null. </exception>
 
-         </member>
 
-         <member name="T:Quartz.SchedulerConstants">
 
-             <summary>
 
-             Scheduler constants.
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerConstants.DefaultGroup">
 
-             <summary>
 
-             A (possibly) useful constant that can be used for specifying the group
 
-             that <see cref="T:Quartz.IJob"/> and <see cref="T:Quartz.ITrigger"/> instances belong to.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerConstants.DefaultRecoveryGroup">
 
-             <summary>
 
-             A constant <see cref="T:Quartz.ITrigger"/> group name used internally by the
 
-             scheduler - clients should not use the value of this constant
 
-             ("RECOVERING_JOBS") for thename of a <see cref="T:Quartz.ITrigger"/>'s group.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerConstants.DefaultFailOverGroup">
 
-             <summary>
 
-             A constant <see cref="T:Quartz.ITrigger"/> group name used internally by the
 
-             scheduler - clients should not use the value of this constant
 
-             ("FAILED_OVER_JOBS") for thename of a <see cref="T:Quartz.ITrigger"/>'s group.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerConstants.FailedJobOriginalTriggerName">
 
-             <summary>
 
-              A constant <see cref="T:Quartz.JobDataMap"/> key that can be used to retrieve the
 
-             name of the original <see cref="T:Quartz.ITrigger"/> from a recovery trigger's
 
-             data map in the case of a job recovering after a failed scheduler
 
-             instance.
 
-             </summary>
 
-             <seealso cref="P:Quartz.IJobDetail.RequestsRecovery"/>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerConstants.FailedJobOriginalTriggerGroup">
 
-             <summary>
 
-             A constant <see cref="T:Quartz.JobDataMap"/> key that can be used to retrieve the
 
-             group of the original <see cref="T:Quartz.ITrigger"/> from a recovery trigger's
 
-             data map in the case of a job recovering after a failed scheduler
 
-             instance.
 
-             </summary>
 
-             <seealso cref="P:Quartz.IJobDetail.RequestsRecovery"/>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerConstants.FailedJobOriginalTriggerFiretime">
 
-             <summary>
 
-             A constant <see cref="T:Quartz.JobDataMap"/> key that can be used to retrieve the
 
-             fire time of the original <see cref="T:Quartz.ITrigger"/> from a recovery
 
-             trigger's data map in the case of a job recovering after a failed scheduler
 
-             instance.
 
-             </summary>
 
-             <remarks>
 
-             Note that this is the time the original firing actually occurred,
 
-             which may be different from the scheduled fire time - as a trigger doesn't
 
-             always fire exactly on time.
 
-             </remarks>
 
-             <seealso cref="P:Quartz.IJobDetail.RequestsRecovery"/>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerConstants.FailedJobOriginalTriggerScheduledFiretime">
 
-             <summary>
 
-             A constant <code>JobDataMap</code> key that can be used to retrieve the scheduled
 
-             fire time of the original <code>Trigger</code> from a recovery  trigger's data
 
-             map in the case of a job recovering after a failed scheduler instance.  
 
-             </summary>
 
-             <remarks>
 
-             Note that this is the time the original firing was scheduled for, which may
 
-             be different from the actual firing time - as a trigger doesn't always fire exactly on time.
 
-             </remarks>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerConstants.SchedulingSignalDateTime">
 
-             <summary>
 
-             A special date time to check against when signaling scheduling change when the signaled fire date suggestion is actually irrelevant.
 
-             We only want to signal the change.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.SchedulerContext">
 
-             <summary>
 
-             Holds context/environment data that can be made available to Jobs as they
 
-             are executed. 
 
-             </summary>
 
-             <remarks>
 
-             Future versions of Quartz may make distinctions on how it propagates
 
-             data in <see cref="T:Quartz.SchedulerContext"/> between instances of proxies to a 
 
-             single scheduler instance - i.e. if Quartz is being used via WCF of Remoting.
 
-             </remarks>
 
-             <seealso cref="P:Quartz.IScheduler.Context"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerContext.#ctor">
 
-             <summary>
 
-             Create an empty <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerContext.#ctor(System.Collections.Generic.IDictionary{System.String,System.Object})">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.JobDataMap"/> with the given data.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerContext.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="T:Quartz.SchedulerInstruction">
 
-             <summary>
 
-             Instructs Scheduler what to do with a trigger and job.
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerInstruction.NoInstruction">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that the <see cref="T:Quartz.ITrigger"/>
 
-             has no further instructions.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerInstruction.ReExecuteJob">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that the <see cref="T:Quartz.ITrigger"/>
 
-             wants the <see cref="T:Quartz.IJobDetail"/> to re-Execute
 
-             immediately. If not in a 'RECOVERING' or 'FAILED_OVER' situation, the
 
-             execution context will be re-used (giving the <see cref="T:Quartz.IJob"/> the
 
-             ability to 'see' anything placed in the context by its last execution).
 
-             </summary>      
 
-         </member>
 
-         <member name="F:Quartz.SchedulerInstruction.SetTriggerComplete">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that the <see cref="T:Quartz.ITrigger"/>
 
-             should be put in the <see cref="F:Quartz.TriggerState.Complete"/> state.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerInstruction.DeleteTrigger">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that the <see cref="T:Quartz.ITrigger"/>
 
-             wants itself deleted.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerInstruction.SetAllJobTriggersComplete">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that all <see cref="T:Quartz.ITrigger"/>
 
-             s referencing the same <see cref="T:Quartz.IJobDetail"/> as
 
-             this one should be put in the <see cref="F:Quartz.TriggerState.Complete"/> state.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerInstruction.SetAllJobTriggersError">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that all <see cref="T:Quartz.ITrigger"/>
 
-             s referencing the same <see cref="T:Quartz.IJobDetail"/> as
 
-             this one should be put in the <see cref="F:Quartz.TriggerState.Error"/> state.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerInstruction.SetTriggerError">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that the <see cref="T:Quartz.ITrigger"/>
 
-             should be put in the <see cref="F:Quartz.TriggerState.Error"/> state.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.SchedulerMetaData">
 
-             <summary>
 
-             Describes the settings and capabilities of a given <see cref="T:Quartz.IScheduler"/>
 
-             instance.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerMetaData.#ctor(System.String,System.String,System.Type,System.Boolean,System.Boolean,System.Boolean,System.Boolean,System.Nullable{System.DateTimeOffset},System.Int32,System.Type,System.Boolean,System.Boolean,System.Type,System.Int32,System.String)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.SchedulerMetaData"/> class.
 
-             </summary>
 
-             <param name="schedName">Name of the scheduler.</param>
 
-             <param name="schedInst">The scheduler instance.</param>
 
-             <param name="schedType">The scheduler type.</param>
 
-             <param name="isRemote">if set to <c>true</c>, scheduler is a remote scheduler.</param>
 
-             <param name="started">if set to <c>true</c>, scheduler is started.</param>
 
-             <param name="isInStandbyMode">if set to <c>true</c>, scheduler is in standby mode.</param>
 
-             <param name="shutdown">if set to <c>true</c>, scheduler is shutdown.</param>
 
-             <param name="startTime">The start time.</param>
 
-             <param name="numberOfJobsExec">The number of jobs executed.</param>
 
-             <param name="jsType">The job store type.</param>
 
-             <param name="jsPersistent">if set to <c>true</c>, job store is persistent.</param>
 
-             <param name="jsClustered">if set to <c>true</c>, the job store is clustered</param>
 
-             <param name="tpType">The thread pool type.</param>
 
-             <param name="tpSize">Size of the thread pool.</param>
 
-             <param name="version">The version string.</param>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerMetaData.GetSummary">
 
-             <summary>
 
-             Returns a formatted (human readable) string describing all the <see cref="T:Quartz.IScheduler"/>'s
 
-             meta-data values.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The format of the string looks something like this:
 
-             <pre>
 
-             Quartz Scheduler 'SchedulerName' with instanceId 'SchedulerInstanceId' Scheduler class: 'Quartz.Impl.StdScheduler' - running locally. Running since: '11:33am on Jul 19, 2002' Not currently paused. Number of Triggers fired: '123' Using thread pool 'Quartz.Simpl.SimpleThreadPool' - with '8' threads Using job-store 'Quartz.Impl.JobStore' - which supports persistence.
 
-             </pre>
 
-             </para>
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerMetaData.ToString">
 
-             <summary>
 
-             Return a simple string representation of this object.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.SchedulerName">
 
-             <summary>
 
-             Returns the name of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.SchedulerInstanceId">
 
-             <summary>
 
-             Returns the instance Id of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.SchedulerType">
 
-             <summary>
 
-             Returns the class-name of the <see cref="T:Quartz.IScheduler"/> instance.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.SchedulerRemote">
 
-             <summary>
 
-             Returns whether the <see cref="T:Quartz.IScheduler"/> is being used remotely (via remoting).
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.Started">
 
-             <summary>
 
-             Returns whether the scheduler has been started.
 
-             </summary>
 
-             <remarks>
 
-             Note: <see cref="P:Quartz.SchedulerMetaData.Started"/> may return <see langword="true"/> even if
 
-             <see cref="P:Quartz.SchedulerMetaData.InStandbyMode"/> returns <see langword="true"/>.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.InStandbyMode">
 
-             <summary>
 
-             Reports whether the <see cref="T:Quartz.IScheduler"/> is in standby mode.
 
-             </summary>
 
-             <remarks>
 
-             Note: <see cref="P:Quartz.SchedulerMetaData.Started"/> may return <see langword="true"/> even if
 
-             <see cref="P:Quartz.SchedulerMetaData.InStandbyMode"/> returns <see langword="true"/>.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.Shutdown">
 
-             <summary>
 
-             Reports whether the <see cref="T:Quartz.IScheduler"/> has been Shutdown.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.JobStoreType">
 
-             <summary>
 
-             Returns the class-name of the <see cref="T:Quartz.Spi.IJobStore"/> instance that is
 
-             being used by the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.ThreadPoolType">
 
-             <summary>
 
-             Returns the type name of the <see cref="T:System.Threading.ThreadPool"/> instance that is
 
-             being used by the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.ThreadPoolSize">
 
-             <summary> 
 
-             Returns the number of threads currently in the <see cref="T:Quartz.IScheduler"/>'s
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.Version">
 
-             <summary>
 
-             Returns the version of Quartz that is running.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.RunningSince">
 
-             <summary> 
 
-             Returns the <see cref="T:System.DateTimeOffset"/> at which the Scheduler started running.
 
-             </summary>
 
-             <returns> null if the scheduler has not been started.
 
-             </returns>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.NumberOfJobsExecuted">
 
-             <summary>
 
-             Returns the number of jobs executed since the <see cref="T:Quartz.IScheduler"/>
 
-             started..
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.JobStoreSupportsPersistence">
 
-             <summary>
 
-             Returns whether or not the <see cref="T:Quartz.IScheduler"/>'s<see cref="T:Quartz.Spi.IJobStore"/>
 
-             instance supports persistence.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.JobStoreClustered">
 
-             <summary>
 
-             Returns whether or not the <see cref="T:Quartz.IScheduler"/>'s <see cref="T:Quartz.Spi.IJobStore"/>
 
-             is clustered.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.SimpleScheduleBuilder">
 
-             <summary>
 
-             SimpleScheduleBuilder is a <see cref="T:Quartz.IScheduleBuilder"/>
 
-             that defines strict/literal interval-based schedules for
 
-             <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             Quartz provides a builder-style API for constructing scheduling-related
 
-             entities via a Domain-Specific Language (DSL).  The DSL can best be
 
-             utilized through the usage of static imports of the methods on the classes
 
-             <see cref="T:Quartz.TriggerBuilder"/>, <see cref="T:Quartz.JobBuilder"/>,
 
-             <see cref="T:Quartz.DateBuilder"/>, <see cref="T:Quartz.JobKey"/>, <see cref="T:Quartz.TriggerKey"/>
 
-             and the various <see cref="T:Quartz.IScheduleBuilder"/> implementations.
 
-             </para>
 
-             <para>Client code can then use the DSL to write code such as this:</para>
 
-             <code>
 
-             JobDetail job = JobBuilder.Create<MyJob>()
 
-                 .WithIdentity("myJob")
 
-                 .Build();
 
-             Trigger trigger = TriggerBuilder.Create()
 
-                 .WithIdentity(triggerKey("myTrigger", "myTriggerGroup"))
 
-                 .WithSimpleSchedule(x => x
 
-                     .WithIntervalInHours(1)
 
-                     .RepeatForever())
 
-                 .StartAt(DateBuilder.FutureDate(10, IntervalUnit.Minute))
 
-                 .Build();
 
-             scheduler.scheduleJob(job, trigger);
 
-             </code>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.ISimpleTrigger"/>
 
-             <seealso cref="T:Quartz.CalendarIntervalScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.CronScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.IScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.TriggerBuilder"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.Create">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatMinutelyForever">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat forever with a 1 minute interval.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatMinutelyForever(System.Int32)">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat forever with an interval
 
-             of the given number of minutes.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatSecondlyForever">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat forever with a 1 second interval.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatSecondlyForever(System.Int32)">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat forever with an interval
 
-             of the given number of seconds.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatHourlyForever">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat forever with a 1 hour interval.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatHourlyForever(System.Int32)">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat forever with an interval
 
-             of the given number of hours.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatMinutelyForTotalCount(System.Int32)">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat the given number
 
-             of times - 1  with a 1 minute interval.
 
-             </summary>
 
-             <remarks>
 
-             <para>Note: Total count = 1 (at start time) + repeat count</para>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatMinutelyForTotalCount(System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat the given number
 
-             of times - 1  with an interval of the given number of minutes.
 
-             </summary>
 
-             <remarks>
 
-             <para>Note: Total count = 1 (at start time) + repeat count</para>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatSecondlyForTotalCount(System.Int32)">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat the given number
 
-             of times - 1  with a 1 second interval.
 
-             </summary>
 
-             <remarks>
 
-             <para>Note: Total count = 1 (at start time) + repeat count</para>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatSecondlyForTotalCount(System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat the given number
 
-             of times - 1  with an interval of the given number of seconds.
 
-             </summary>
 
-             <remarks>
 
-             <para>Note: Total count = 1 (at start time) + repeat count</para>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatHourlyForTotalCount(System.Int32)">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat the given number
 
-             of times - 1  with a 1 hour interval.
 
-             </summary>
 
-             <remarks>
 
-             <para>Note: Total count = 1 (at start time) + repeat count</para>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatHourlyForTotalCount(System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat the given number
 
-             of times - 1  with an interval of the given number of hours.
 
-             </summary>
 
-             <remarks>
 
-             <para>Note: Total count = 1 (at start time) + repeat count</para>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.Build">
 
-             <summary>
 
-             Build the actual Trigger -- NOT intended to be invoked by end users,
 
-             but will rather be invoked by a TriggerBuilder which this
 
-             ScheduleBuilder is given to.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <seealso cref="M:Quartz.TriggerBuilder.WithSchedule(Quartz.IScheduleBuilder)"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.WithInterval(System.TimeSpan)">
 
-             <summary>
 
-             Specify a repeat interval in milliseconds.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="timeSpan">the time span at which the trigger should repeat.</param>
 
-             <returns>the updated SimpleScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ISimpleTrigger.RepeatInterval"/>
 
-             <seealso cref="M:Quartz.SimpleScheduleBuilder.WithRepeatCount(System.Int32)"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.WithIntervalInSeconds(System.Int32)">
 
-             <summary>
 
-             Specify a repeat interval in seconds.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="seconds">the time span at which the trigger should repeat.</param>
 
-             <returns>the updated SimpleScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ISimpleTrigger.RepeatInterval"/>
 
-             <seealso cref="M:Quartz.SimpleScheduleBuilder.WithRepeatCount(System.Int32)"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.WithRepeatCount(System.Int32)">
 
-             <summary>
 
-             Specify a the number of time the trigger will repeat - total number of
 
-             firings will be this number + 1.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="repeatCount">the number of seconds at which the trigger should repeat.</param>
 
-             <returns>the updated SimpleScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ISimpleTrigger.RepeatCount"/>
 
-             <seealso cref="M:Quartz.SimpleScheduleBuilder.RepeatForever"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatForever">
 
-             <summary>
 
-             Specify that the trigger will repeat indefinitely.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated SimpleScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ISimpleTrigger.RepeatCount"/>
 
-             <seealso cref="F:Quartz.Impl.Triggers.SimpleTriggerImpl.RepeatIndefinitely"/>
 
-             <seealso cref="M:Quartz.SimpleScheduleBuilder.WithInterval(System.TimeSpan)"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.WithMisfireHandlingInstructionIgnoreMisfires">
 
-             <summary>
 
-             If the Trigger misfires, use the
 
-             <see cref="F:Quartz.MisfireInstruction.IgnoreMisfirePolicy"/> instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated CronScheduleBuilder</returns>
 
-              <seealso cref="F:Quartz.MisfireInstruction.IgnoreMisfirePolicy"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.WithMisfireHandlingInstructionFireNow">
 
-             <summary>
 
-             If the Trigger misfires, use the
 
-             <see cref="F:Quartz.MisfireInstruction.SimpleTrigger.FireNow"/> instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated SimpleScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.SimpleTrigger.FireNow"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.WithMisfireHandlingInstructionNextWithExistingCount">
 
-             <summary>
 
-             If the Trigger misfires, use the
 
-             <see cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNextWithExistingCount"/> instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated SimpleScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNextWithExistingCount"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.WithMisfireHandlingInstructionNextWithRemainingCount">
 
-             <summary>
 
-             If the Trigger misfires, use the
 
-             <see cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNextWithRemainingCount"/> instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated SimpleScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNextWithRemainingCount"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.WithMisfireHandlingInstructionNowWithExistingCount">
 
-             <summary>
 
-             If the Trigger misfires, use the
 
-             <see cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNowWithExistingRepeatCount"/> instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated SimpleScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNowWithExistingRepeatCount"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.WithMisfireHandlingInstructionNowWithRemainingCount">
 
-             <summary>
 
-             If the Trigger misfires, use the
 
-             <see cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNowWithRemainingRepeatCount"/> instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated SimpleScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNowWithRemainingRepeatCount"/>
 
-         </member>
 
-         <member name="T:Quartz.SimpleScheduleTriggerBuilderExtensions">
 
-             <summary>
 
-             Extension methods that attach <see cref="T:Quartz.SimpleScheduleBuilder"/> to <see cref="T:Quartz.TriggerBuilder"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.SystemTime">
 
-             <summary>
 
-             A time source for Quartz.NET that returns the current time.
 
-             Original idea by Ayende Rahien:
 
-             http://ayende.com/Blog/archive/2008/07/07/Dealing-with-time-in-tests.aspx
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.SystemTime.UtcNow">
 
-             <summary>
 
-             Return current UTC time via <see cref="T:System.Func`1"/>. Allows easier unit testing.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.SystemTime.Now">
 
-             <summary>
 
-             Return current time in current time zone via <see cref="T:System.Func`1"/>. Allows easier unit testing.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.TimeOfDay">
 
-             <summary>
 
-             Represents a time in hour, minute and second of any given day.
 
-             <remarks>
 
-             <para>
 
-             The hour is in 24-hour convention, meaning values are from 0 to 23. 
 
-             </para>
 
-             </remarks>
 
-             </summary>
 
-             <seealso cref="T:Quartz.IDailyTimeIntervalTrigger"/>
 
-             <author>James House</author>
 
-             <author>Zemian Deng saltnlight5@gmail.com</author>
 
-             <author>Nuno Maia (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.TimeOfDay.#ctor(System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a TimeOfDay instance for the given hour, minute and second.
 
-             </summary>
 
-             <param name="hour">The hour of day, between 0 and 23.</param>
 
-             <param name="minute">The minute of the hour, between 0 and 59.</param>
 
-             <param name="second">The second of the minute, between 0 and 59.</param>
 
-         </member>
 
-         <member name="M:Quartz.TimeOfDay.#ctor(System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a TimeOfDay instance for the given hour, minute (at the zero second of the minute).
 
-             </summary>
 
-             <param name="hour">The hour of day, between 0 and 23.</param>
 
-             <param name="minute">The minute of the hour, between 0 and 59.</param>
 
-         </member>
 
-         <member name="M:Quartz.TimeOfDay.HourMinuteAndSecondOfDay(System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a TimeOfDay instance for the given hour, minute and second.
 
-             </summary>
 
-             <param name="hour">The hour of day, between 0 and 23.</param>
 
-             <param name="minute">The minute of the hour, between 0 and 59.</param>
 
-             <param name="second">The second of the minute, between 0 and 59.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.TimeOfDay.HourAndMinuteOfDay(System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a TimeOfDay instance for the given hour, minute (at the zero second of the minute)..
 
-             </summary>
 
-             <param name="hour">The hour of day, between 0 and 23.</param>
 
-             <param name="minute">The minute of the hour, between 0 and 59.</param>
 
-             <returns>The newly instantiated TimeOfDay</returns>
 
-         </member>
 
-         <member name="M:Quartz.TimeOfDay.Before(Quartz.TimeOfDay)">
 
-             <summary>
 
-             Determine with this time of day is before the given time of day.
 
-             </summary>
 
-             <param name="timeOfDay"></param>
 
-             <returns>True this time of day is before the given time of day.</returns>
 
-         </member>
 
-         <member name="M:Quartz.TimeOfDay.GetTimeOfDayForDate(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Return a date with time of day reset to this object values. The millisecond value will be zero. 
 
-             </summary>
 
-             <param name="dateTime"></param>
 
-         </member>
 
-         <member name="P:Quartz.TimeOfDay.Hour">
 
-             <summary>
 
-             The hour of the day (between 0 and 23). 
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.TimeOfDay.Minute">
 
-             <summary>
 
-             The minute of the hour (between 0 and 59). 
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.TimeOfDay.Second">
 
-             <summary>
 
-             The second of the minute (between 0 and 59). 
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.TimeSpanParseRuleAttribute">
 
-             <summary>
 
-             Attribute to use with public <see cref="T:System.TimeSpan"/> properties that
 
-             can be set with Quartz configuration. Attribute can be used to advice
 
-             parsing to use correct type of time span (milliseconds, seconds, minutes, hours)
 
-             as it may depend on property.
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-             <seealso cref="T:Quartz.TimeSpanParseRuleAttribute"/>
 
-         </member>
 
-         <member name="M:Quartz.TimeSpanParseRuleAttribute.#ctor(Quartz.TimeSpanParseRule)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.TimeSpanParseRuleAttribute"/> class.
 
-             </summary>
 
-             <param name="rule">The rule.</param>
 
-         </member>
 
-         <member name="P:Quartz.TimeSpanParseRuleAttribute.Rule">
 
-             <summary>
 
-             Gets the rule.
 
-             </summary>
 
-             <value>The rule.</value>
 
-         </member>
 
-         <member name="T:Quartz.TimeSpanParseRule">
 
-             <summary>
 
-             Possible parse rules for <see cref="T:System.TimeSpan"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.TimeSpanParseRule.Milliseconds">
 
-             <summary>
 
-             
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.TimeSpanParseRule.Seconds">
 
-             <summary>
 
-             
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.TimeSpanParseRule.Minutes">
 
-             <summary>
 
-             
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.TimeSpanParseRule.Hours">
 
-             <summary>
 
-             
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.TimeSpanParseRule.Days">
 
-             <summary>
 
-             
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.TriggerBuilder">
 
-             <summary>
 
-             TriggerBuilder is used to instantiate <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The builder will always try to keep itself in a valid state, with 
 
-             reasonable defaults set for calling build() at any point.  For instance
 
-             if you do not invoke <i>WithSchedule(..)</i> method, a default schedule
 
-             of firing once immediately will be used.  As another example, if you
 
-             do not invoked <i>WithIdentity(..)</i> a trigger name will be generated
 
-             for you.
 
-             </para>
 
-             <para>
 
-             Quartz provides a builder-style API for constructing scheduling-related
 
-             entities via a Domain-Specific Language (DSL).  The DSL can best be
 
-             utilized through the usage of static imports of the methods on the classes
 
-             <see cref="T:Quartz.TriggerBuilder"/>, <see cref="T:Quartz.JobBuilder"/>,
 
-             <see cref="T:Quartz.DateBuilder"/>, <see cref="T:Quartz.JobKey"/>, <see cref="T:Quartz.TriggerKey"/>
 
-             and the various <see cref="T:Quartz.IScheduleBuilder"/> implementations.
 
-             </para>
 
-             <para>
 
-             Client code can then use the DSL to write code such as this:
 
-             </para>
 
-             <code>
 
-             IJobDetail job = JobBuilder.Create<MyJob>()
 
-                 .WithIdentity("myJob")
 
-                 .Build();
 
-             ITrigger trigger = TriggerBuilder.Create()
 
-                 .WithIdentity("myTrigger", "myTriggerGroup")
 
-                 .WithSimpleSchedule(x => x
 
-                     .WithIntervalInHours(1)
 
-                     .RepeatForever())
 
-                 .StartAt(DateBuilder.FutureDate(10, IntervalUnit.Minute))
 
-                 .Build();
 
-             scheduler.scheduleJob(job, trigger);
 
-             </code>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.JobBuilder"/>
 
-             <seealso cref="T:Quartz.IScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.DateBuilder"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.Create">
 
-             <summary>
 
-             Create a new TriggerBuilder with which to define a
 
-             specification for a Trigger.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the new TriggerBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.Build">
 
-             <summary>
 
-             Produce the <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>a Trigger that meets the specifications of the builder.</returns>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.WithIdentity(System.String)">
 
-             <summary>
 
-             Use a <see cref="T:Quartz.TriggerKey"/> with the given name and default group to
 
-             identify the Trigger.
 
-             </summary>
 
-             <remarks>
 
-             <para>If none of the 'withIdentity' methods are set on the TriggerBuilder,
 
-             then a random, unique TriggerKey will be generated.</para>
 
-             </remarks>
 
-             <param name="name">the name element for the Trigger's TriggerKey</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="T:Quartz.TriggerKey"/>
 
-             <seealso cref="P:Quartz.ITrigger.Key"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.WithIdentity(System.String,System.String)">
 
-             <summary>
 
-             Use a TriggerKey with the given name and group to
 
-             identify the Trigger.
 
-             </summary>
 
-             <remarks>
 
-             <para>If none of the 'withIdentity' methods are set on the TriggerBuilder,
 
-             then a random, unique TriggerKey will be generated.</para>
 
-             </remarks>
 
-             <param name="name">the name element for the Trigger's TriggerKey</param>
 
-             <param name="group">the group element for the Trigger's TriggerKey</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="T:Quartz.TriggerKey"/>
 
-             <seealso cref="P:Quartz.ITrigger.Key"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.WithIdentity(Quartz.TriggerKey)">
 
-             <summary>
 
-             Use the given TriggerKey to identify the Trigger.
 
-             </summary>
 
-             <remarks>
 
-             <para>If none of the 'withIdentity' methods are set on the TriggerBuilder,
 
-             then a random, unique TriggerKey will be generated.</para>
 
-             </remarks>
 
-             <param name="key">the TriggerKey for the Trigger to be built</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="T:Quartz.TriggerKey"/>
 
-             <seealso cref="P:Quartz.ITrigger.Key"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.WithDescription(System.String)">
 
-             <summary>
 
-             Set the given (human-meaningful) description of the Trigger.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="description">the description for the Trigger</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.Description"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.WithPriority(System.Int32)">
 
-             <summary>
 
-             Set the Trigger's priority.  When more than one Trigger have the same
 
-             fire time, the scheduler will fire the one with the highest priority
 
-             first.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="priority">the priority for the Trigger</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="F:Quartz.TriggerConstants.DefaultPriority"/>
 
-             <seealso cref="P:Quartz.ITrigger.Priority"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.ModifiedByCalendar(System.String)">
 
-             <summary>
 
-             Set the name of the <see cref="T:Quartz.ICalendar"/> that should be applied to this
 
-             Trigger's schedule.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="calendarName">the name of the Calendar to reference.</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="T:Quartz.ICalendar"/>
 
-             <seealso cref="P:Quartz.ITrigger.CalendarName"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.StartAt(System.DateTimeOffset)">
 
-             <summary>
 
-             Set the time the Trigger should start at - the trigger may or may
 
-             not fire at this time - depending upon the schedule configured for
 
-             the Trigger.  However the Trigger will NOT fire before this time,
 
-             regardless of the Trigger's schedule.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="startTimeUtc">the start time for the Trigger.</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.StartTimeUtc"/>
 
-             <seealso cref="T:Quartz.DateBuilder"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.StartNow">
 
-             <summary>
 
-             Set the time the Trigger should start at to the current moment -
 
-             the trigger may or may not fire at this time - depending upon the
 
-             schedule configured for the Trigger.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.StartTimeUtc"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.EndAt(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Set the time at which the Trigger will no longer fire - even if it's
 
-             schedule has remaining repeats.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="endTimeUtc">the end time for the Trigger.  If null, the end time is indefinite.</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.EndTimeUtc"/>
 
-             <seealso cref="T:Quartz.DateBuilder"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.WithSchedule(Quartz.IScheduleBuilder)">
 
-             <summary>
 
-             Set the <see cref="T:Quartz.IScheduleBuilder"/> that will be used to define the
 
-             Trigger's schedule.
 
-             </summary>
 
-             <remarks>
 
-             <para>The particular <see cref="T:Quartz.IScheduleBuilder"/> used will dictate
 
-             the concrete type of Trigger that is produced by the TriggerBuilder.</para>
 
-             </remarks>
 
-             <param name="scheduleBuilder">the SchedulerBuilder to use.</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="T:Quartz.IScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.SimpleScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.CronScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.CalendarIntervalScheduleBuilder"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.ForJob(Quartz.JobKey)">
 
-             <summary>
 
-             Set the identity of the Job which should be fired by the produced
 
-             Trigger.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="jobKey">the identity of the Job to fire.</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobKey"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.ForJob(System.String)">
 
-             <summary>
 
-             Set the identity of the Job which should be fired by the produced
 
-             Trigger - a <see cref="T:Quartz.JobKey"/> will be produced with the given
 
-             name and default group.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="jobName">the name of the job (in default group) to fire.</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobKey"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.ForJob(System.String,System.String)">
 
-             <summary>
 
-             Set the identity of the Job which should be fired by the produced
 
-             Trigger - a <see cref="T:Quartz.JobKey"/> will be produced with the given
 
-             name and group.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="jobName">the name of the job to fire.</param>
 
-             <param name="jobGroup">the group of the job to fire.</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobKey"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.ForJob(Quartz.IJobDetail)">
 
-             <summary>
 
-             Set the identity of the Job which should be fired by the produced
 
-             Trigger, by extracting the JobKey from the given job.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="jobDetail">the Job to fire.</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobKey"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.UsingJobData(System.String,System.String)">
 
-             <summary>
 
-             Add the given key-value pair to the Trigger's <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.UsingJobData(System.String,System.Int32)">
 
-             <summary>
 
-             Add the given key-value pair to the Trigger's <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.UsingJobData(System.String,System.Int64)">
 
-             <summary>
 
-             Add the given key-value pair to the Trigger's <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.UsingJobData(System.String,System.Single)">
 
-             <summary>
 
-             Add the given key-value pair to the Trigger's <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.UsingJobData(System.String,System.Double)">
 
-             <summary>
 
-             Add the given key-value pair to the Trigger's <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.UsingJobData(System.String,System.Decimal)">
 
-             <summary>
 
-             Add the given key-value pair to the Trigger's <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.UsingJobData(System.String,System.Boolean)">
 
-             <summary>
 
-             Add the given key-value pair to the Trigger's <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.UsingJobData(Quartz.JobDataMap)">
 
-             <summary>
 
-             Add the given key-value pair to the Trigger's <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobDataMap"/>
 
-         </member>
 
-         <member name="T:Quartz.TriggerConstants">
 
-             <summary>
 
-             Common constants for triggers.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.TriggerConstants.DefaultPriority">
 
-             <summary>
 
-             The default value for priority.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.TriggerKey">
 
-             <summary>
 
-              Uniquely identifies a <see cref="T:Quartz.ITrigger"/>.
 
-              </summary>
 
-              <remarks>
 
-              <para>Keys are composed of both a name and group, and the name must be unique
 
-              within the group.  If only a name is specified then the default group
 
-              name will be used.
 
-              </para> 
 
-              <para>
 
-              Quartz provides a builder-style API for constructing scheduling-related
 
-              entities via a Domain-Specific Language (DSL).  The DSL can best be
 
-              utilized through the usage of static imports of the methods on the classes
 
-              <see cref="T:Quartz.TriggerBuilder"/>, <see cref="T:Quartz.JobBuilder"/>,
 
-              <see cref="T:Quartz.DateBuilder"/>, <see cref="T:Quartz.JobKey"/>, <see cref="T:Quartz.TriggerKey"/>
 
-              and the various <see cref="T:Quartz.IScheduleBuilder"/> implementations.
 
-              </para>
 
-              <para>
 
-              Client code can then use the DSL to write code such as this:
 
-              </para>
 
-              <code>
 
-              IJobDetail job = JobBuilder.Create<MyJob>()
 
-                  .WithIdentity("myJob")
 
-                  .Build();
 
-              ITrigger trigger = TriggerBuilder.Create()
 
-                  .WithIdentity("myTrigger", "myTriggerGroup")
 
-                  .WithSimpleSchedule(x => x
 
-                      .WithIntervalInHours(1)
 
-                      .RepeatForever())
 
-                  .StartAt(DateBuilder.FutureDate(10, IntervalUnit.Minute))
 
-                  .Build();
 
-              scheduler.scheduleJob(job, trigger);
 
-              </code>
 
-              </remarks>
 
-              <seealso cref="T:Quartz.ITrigger"/>
 
-              <seealso cref="F:Quartz.Util.Key`1.DefaultGroup"/>
 
-         </member>
 
-         <member name="T:Quartz.TriggerState">
 
-             <summary>
 
-             All trigger states known to Scheduler.
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.TriggerState.Normal">
 
-             <summary>
 
-             Indicates that the <see cref="T:Quartz.ITrigger"/> is in the "normal" state.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.TriggerState.Paused">
 
-             <summary>
 
-             Indicates that the <see cref="T:Quartz.ITrigger"/> is in the "paused" state.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.TriggerState.Complete">
 
-             <summary>
 
-             Indicates that the <see cref="T:Quartz.ITrigger"/> is in the "complete" state.
 
-             </summary>
 
-             <remarks>
 
-             "Complete" indicates that the trigger has not remaining fire-times in
 
-             its schedule.
 
-             </remarks>
 
-         </member>
 
-         <member name="F:Quartz.TriggerState.Error">
 
-             <summary>
 
-             Indicates that the <see cref="T:Quartz.ITrigger"/> is in the "error" state.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             A <see cref="T:Quartz.ITrigger"/> arrives at the error state when the scheduler
 
-             attempts to fire it, but cannot due to an error creating and executing
 
-             its related job. Often this is due to the <see cref="T:Quartz.IJob"/>'s
 
-             class not existing in the classpath.
 
-             </para>
 
-             
 
-             <para>
 
-             When the trigger is in the error state, the scheduler will make no
 
-             attempts to fire it.
 
-             </para>
 
-             </remarks>
 
-         </member>
 
-         <member name="F:Quartz.TriggerState.Blocked">
 
-             <summary>
 
-             Indicates that the <see cref="T:Quartz.ITrigger"/> is in the "blocked" state.
 
-             </summary>
 
-             <remarks>
 
-             A <see cref="T:Quartz.ITrigger"/> arrives at the blocked state when the job that
 
-             it is associated with has a <see cref="T:Quartz.DisallowConcurrentExecutionAttribute"/> and it is 
 
-             currently executing.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.DisallowConcurrentExecutionAttribute"/>
 
-         </member>
 
-         <member name="F:Quartz.TriggerState.None">
 
-             <summary>
 
-             Indicates that the <see cref="T:Quartz.ITrigger"/> does not exist.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.TriggerTimeComparator">
 
-             <summary>
 
-             A Comparator that compares trigger's next fire times, or in other words,
 
-             sorts them according to earliest next fire time.  If the fire times are
 
-             the same, then the triggers are sorted according to priority (highest
 
-             value first), if the priorities are the same, then they are sorted
 
-             by key.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.TriggerUtils">
 
-             <summary>
 
-             Convenience and utility methods for simplifying the construction and
 
-             configuration of <see cref="T:Quartz.ITrigger"/>s and DateTimeOffsetOffsets.
 
-             </summary>
 
-             <seealso cref="T:Quartz.ICronTrigger"/>
 
-             <seealso cref="T:Quartz.ISimpleTrigger"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.TriggerUtils.ComputeFireTimes(Quartz.Spi.IOperableTrigger,Quartz.ICalendar,System.Int32)">
 
-             <summary>
 
-             Returns a list of Dates that are the next fire times of a
 
-             <see cref="T:Quartz.ITrigger"/>.
 
-             The input trigger will be cloned before any work is done, so you need
 
-             not worry about its state being altered by this method.
 
-             </summary>
 
-             <param name="trigg">The trigger upon which to do the work</param>
 
-             <param name="cal">The calendar to apply to the trigger's schedule</param>
 
-             <param name="numTimes">The number of next fire times to produce</param>
 
-             <returns>List of java.util.Date objects</returns>
 
-         </member>
 
-         <member name="M:Quartz.TriggerUtils.ComputeEndTimeToAllowParticularNumberOfFirings(Quartz.Spi.IOperableTrigger,Quartz.ICalendar,System.Int32)">
 
-             <summary>
 
-             Compute the <see cref="T:System.DateTimeOffset"/> that is 1 second after the Nth firing of 
 
-             the given <see cref="T:Quartz.ITrigger"/>, taking the triger's associated 
 
-             <see cref="T:Quartz.ICalendar"/> into consideration.
 
-             </summary>
 
-             <remarks>
 
-             The input trigger will be cloned before any work is done, so you need
 
-             not worry about its state being altered by this method.
 
-             </remarks>
 
-             <param name="trigger">The trigger upon which to do the work</param>
 
-             <param name="calendar">The calendar to apply to the trigger's schedule</param>
 
-             <param name="numberOfTimes">The number of next fire times to produce</param>
 
-             <returns>the computed Date, or null if the trigger (as configured) will not fire that many times</returns>
 
-         </member>
 
-         <member name="M:Quartz.TriggerUtils.ComputeFireTimesBetween(Quartz.Spi.IOperableTrigger,Quartz.ICalendar,System.DateTimeOffset,System.DateTimeOffset)">
 
-             <summary>
 
-             Returns a list of Dates that are the next fire times of a  <see cref="T:Quartz.ITrigger"/>
 
-             that fall within the given date range. The input trigger will be cloned
 
-             before any work is done, so you need not worry about its state being
 
-             altered by this method.
 
-             <para>
 
-             NOTE: if this is a trigger that has previously fired within the given
 
-             date range, then firings which have already occurred will not be listed
 
-             in the output List.
 
-             </para>
 
-             </summary>
 
-             <param name="trigg">The trigger upon which to do the work</param>
 
-             <param name="cal">The calendar to apply to the trigger's schedule</param>
 
-             <param name="from">The starting date at which to find fire times</param>
 
-             <param name="to">The ending date at which to stop finding fire times</param>
 
-             <returns>List of java.util.Date objects</returns>
 
-         </member>
 
-         <member name="T:Quartz.UnableToInterruptJobException">
 
-             <summary>
 
-             An exception that is thrown to indicate that a call to 
 
-             <see cref="M:Quartz.IInterruptableJob.Interrupt"/> failed without interrupting the Job.
 
-             </summary>
 
-             <seealso cref="T:Quartz.IInterruptableJob"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.UnableToInterruptJobException.#ctor(System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.UnableToInterruptJobException"/> with the given message.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.UnableToInterruptJobException.#ctor(System.Exception)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.UnableToInterruptJobException"/> with the given cause.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.UnableToInterruptJobException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.UnableToInterruptJobException"/> class.
 
-             </summary>
 
-             <param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"></see> that holds the serialized object data about the exception being thrown.</param>
 
-             <param name="context">The <see cref="T:System.Runtime.Serialization.StreamingContext"></see> that contains contextual information about the source or destination.</param>
 
-             <exception cref="T:System.Runtime.Serialization.SerializationException">The class name is null or <see cref="P:System.Exception.HResult"></see> is zero (0). </exception>
 
-             <exception cref="T:System.ArgumentNullException">The info parameter is null. </exception>
 
-         </member>
 
-     </members>
 
- </doc>
 
 
  |