| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528152915301531153215331534153515361537153815391540154115421543154415451546154715481549155015511552155315541555155615571558155915601561156215631564156515661567156815691570157115721573157415751576157715781579158015811582158315841585158615871588158915901591159215931594159515961597159815991600160116021603160416051606160716081609161016111612161316141615161616171618161916201621162216231624162516261627162816291630163116321633163416351636163716381639164016411642164316441645164616471648164916501651165216531654165516561657165816591660166116621663166416651666166716681669167016711672167316741675167616771678167916801681168216831684168516861687168816891690169116921693169416951696169716981699170017011702170317041705170617071708170917101711171217131714171517161717171817191720172117221723172417251726172717281729173017311732173317341735173617371738173917401741174217431744174517461747174817491750175117521753175417551756175717581759176017611762176317641765176617671768176917701771177217731774177517761777177817791780178117821783178417851786178717881789179017911792179317941795179617971798179918001801180218031804180518061807180818091810181118121813181418151816181718181819182018211822182318241825182618271828182918301831183218331834183518361837183818391840184118421843184418451846184718481849185018511852185318541855185618571858185918601861186218631864186518661867186818691870187118721873187418751876187718781879188018811882188318841885188618871888188918901891189218931894189518961897189818991900190119021903190419051906190719081909191019111912191319141915191619171918191919201921192219231924192519261927192819291930193119321933193419351936193719381939194019411942194319441945194619471948194919501951195219531954195519561957195819591960196119621963196419651966196719681969197019711972197319741975197619771978197919801981198219831984198519861987198819891990199119921993199419951996199719981999200020012002200320042005200620072008200920102011201220132014201520162017201820192020202120222023202420252026202720282029203020312032203320342035203620372038203920402041204220432044204520462047204820492050205120522053205420552056205720582059206020612062206320642065206620672068206920702071207220732074207520762077207820792080208120822083208420852086208720882089209020912092209320942095209620972098209921002101210221032104210521062107210821092110211121122113211421152116211721182119212021212122212321242125212621272128212921302131213221332134213521362137213821392140214121422143214421452146214721482149215021512152215321542155215621572158215921602161216221632164216521662167216821692170217121722173217421752176217721782179218021812182218321842185218621872188218921902191219221932194219521962197219821992200220122022203220422052206220722082209221022112212221322142215221622172218221922202221222222232224222522262227222822292230223122322233223422352236223722382239224022412242224322442245224622472248224922502251225222532254225522562257225822592260226122622263226422652266226722682269227022712272227322742275227622772278227922802281228222832284228522862287228822892290229122922293229422952296229722982299230023012302230323042305230623072308230923102311231223132314231523162317231823192320232123222323232423252326232723282329233023312332233323342335233623372338233923402341234223432344234523462347234823492350235123522353235423552356235723582359236023612362236323642365236623672368236923702371237223732374237523762377237823792380238123822383238423852386238723882389239023912392239323942395239623972398239924002401240224032404240524062407240824092410241124122413241424152416241724182419242024212422242324242425242624272428242924302431243224332434243524362437243824392440244124422443244424452446244724482449245024512452245324542455245624572458245924602461246224632464246524662467246824692470247124722473247424752476247724782479248024812482248324842485248624872488248924902491249224932494249524962497249824992500250125022503250425052506250725082509251025112512251325142515251625172518251925202521252225232524252525262527252825292530253125322533253425352536253725382539254025412542254325442545254625472548254925502551255225532554255525562557255825592560256125622563256425652566256725682569257025712572257325742575257625772578257925802581258225832584258525862587258825892590259125922593259425952596259725982599260026012602260326042605260626072608260926102611261226132614261526162617261826192620262126222623262426252626262726282629263026312632263326342635263626372638263926402641264226432644264526462647264826492650265126522653265426552656265726582659266026612662266326642665266626672668266926702671267226732674267526762677267826792680268126822683268426852686268726882689269026912692269326942695269626972698269927002701270227032704270527062707270827092710271127122713271427152716271727182719272027212722272327242725272627272728272927302731273227332734273527362737273827392740274127422743274427452746274727482749275027512752275327542755275627572758275927602761276227632764276527662767276827692770277127722773277427752776277727782779278027812782278327842785278627872788278927902791279227932794279527962797279827992800280128022803280428052806280728082809281028112812281328142815281628172818281928202821282228232824282528262827282828292830283128322833283428352836283728382839284028412842284328442845284628472848284928502851285228532854285528562857285828592860286128622863286428652866286728682869287028712872287328742875287628772878287928802881288228832884288528862887288828892890289128922893289428952896289728982899290029012902290329042905290629072908290929102911291229132914291529162917291829192920292129222923292429252926292729282929293029312932293329342935293629372938293929402941294229432944294529462947294829492950295129522953295429552956295729582959296029612962296329642965296629672968296929702971297229732974297529762977297829792980298129822983298429852986298729882989299029912992299329942995299629972998299930003001300230033004300530063007300830093010301130123013301430153016301730183019302030213022302330243025302630273028302930303031303230333034303530363037303830393040304130423043304430453046304730483049305030513052305330543055305630573058305930603061306230633064306530663067306830693070307130723073307430753076307730783079308030813082308330843085308630873088308930903091309230933094309530963097309830993100310131023103310431053106310731083109311031113112311331143115311631173118311931203121312231233124312531263127312831293130313131323133313431353136313731383139314031413142314331443145314631473148314931503151315231533154315531563157315831593160316131623163316431653166316731683169317031713172317331743175317631773178317931803181318231833184318531863187318831893190319131923193319431953196319731983199320032013202320332043205320632073208320932103211321232133214321532163217321832193220322132223223322432253226322732283229323032313232323332343235323632373238323932403241324232433244324532463247324832493250325132523253325432553256325732583259326032613262326332643265326632673268326932703271327232733274327532763277327832793280328132823283328432853286328732883289329032913292329332943295329632973298329933003301330233033304330533063307330833093310331133123313331433153316331733183319332033213322332333243325332633273328332933303331333233333334333533363337333833393340334133423343334433453346334733483349335033513352335333543355335633573358335933603361336233633364336533663367336833693370337133723373337433753376337733783379338033813382338333843385338633873388338933903391339233933394339533963397339833993400340134023403340434053406340734083409341034113412341334143415341634173418341934203421342234233424342534263427342834293430343134323433343434353436343734383439344034413442344334443445344634473448344934503451345234533454345534563457345834593460346134623463346434653466346734683469347034713472347334743475347634773478347934803481348234833484348534863487348834893490349134923493349434953496349734983499350035013502350335043505350635073508350935103511351235133514351535163517351835193520352135223523352435253526352735283529353035313532353335343535353635373538353935403541354235433544354535463547354835493550355135523553355435553556355735583559356035613562356335643565356635673568356935703571357235733574357535763577357835793580358135823583358435853586358735883589359035913592359335943595359635973598359936003601360236033604360536063607360836093610361136123613361436153616361736183619362036213622362336243625362636273628362936303631363236333634363536363637363836393640364136423643364436453646364736483649365036513652365336543655365636573658365936603661366236633664366536663667366836693670367136723673367436753676367736783679368036813682368336843685368636873688368936903691369236933694369536963697369836993700370137023703370437053706370737083709371037113712371337143715371637173718371937203721372237233724372537263727372837293730373137323733373437353736373737383739374037413742374337443745374637473748374937503751375237533754375537563757375837593760376137623763376437653766376737683769377037713772377337743775377637773778377937803781378237833784378537863787378837893790379137923793379437953796379737983799380038013802380338043805380638073808380938103811381238133814381538163817381838193820382138223823382438253826382738283829383038313832383338343835383638373838383938403841384238433844384538463847384838493850385138523853385438553856385738583859386038613862386338643865386638673868386938703871387238733874387538763877387838793880388138823883388438853886388738883889389038913892389338943895389638973898389939003901390239033904390539063907390839093910391139123913391439153916391739183919392039213922392339243925392639273928392939303931393239333934393539363937393839393940394139423943394439453946394739483949395039513952395339543955395639573958395939603961396239633964396539663967396839693970397139723973397439753976397739783979398039813982398339843985398639873988398939903991399239933994399539963997399839994000400140024003400440054006400740084009401040114012401340144015401640174018401940204021402240234024402540264027402840294030403140324033403440354036403740384039404040414042404340444045404640474048404940504051405240534054405540564057405840594060406140624063406440654066406740684069407040714072407340744075407640774078407940804081408240834084408540864087408840894090409140924093409440954096409740984099410041014102410341044105410641074108410941104111411241134114411541164117411841194120412141224123412441254126412741284129413041314132413341344135413641374138413941404141414241434144414541464147414841494150415141524153415441554156415741584159416041614162416341644165416641674168416941704171417241734174417541764177417841794180418141824183418441854186418741884189419041914192419341944195419641974198419942004201420242034204420542064207420842094210421142124213421442154216421742184219422042214222422342244225422642274228422942304231423242334234423542364237423842394240424142424243424442454246424742484249425042514252425342544255425642574258425942604261426242634264426542664267426842694270427142724273427442754276427742784279428042814282428342844285428642874288428942904291429242934294429542964297429842994300430143024303430443054306430743084309431043114312431343144315431643174318431943204321432243234324432543264327432843294330433143324333433443354336433743384339434043414342434343444345434643474348434943504351435243534354435543564357435843594360436143624363436443654366436743684369437043714372437343744375437643774378437943804381438243834384438543864387438843894390439143924393439443954396439743984399440044014402440344044405440644074408440944104411441244134414441544164417441844194420442144224423442444254426442744284429443044314432443344344435443644374438443944404441444244434444444544464447444844494450445144524453445444554456445744584459446044614462446344644465446644674468446944704471447244734474447544764477447844794480448144824483448444854486448744884489449044914492449344944495449644974498449945004501450245034504450545064507450845094510451145124513451445154516451745184519452045214522452345244525452645274528452945304531453245334534453545364537453845394540454145424543454445454546454745484549455045514552455345544555455645574558455945604561456245634564456545664567456845694570457145724573457445754576457745784579458045814582458345844585458645874588458945904591459245934594459545964597459845994600460146024603460446054606460746084609461046114612461346144615461646174618461946204621462246234624462546264627462846294630463146324633463446354636463746384639464046414642464346444645464646474648464946504651465246534654465546564657465846594660466146624663466446654666466746684669467046714672467346744675467646774678467946804681468246834684468546864687468846894690469146924693469446954696469746984699470047014702470347044705470647074708470947104711471247134714471547164717471847194720472147224723472447254726472747284729473047314732473347344735473647374738473947404741474247434744474547464747474847494750475147524753475447554756475747584759476047614762476347644765476647674768476947704771477247734774477547764777477847794780478147824783478447854786478747884789479047914792479347944795479647974798479948004801480248034804480548064807480848094810481148124813481448154816481748184819482048214822482348244825482648274828482948304831483248334834483548364837483848394840484148424843484448454846484748484849485048514852485348544855485648574858485948604861486248634864486548664867486848694870487148724873487448754876487748784879488048814882488348844885488648874888488948904891489248934894489548964897489848994900490149024903490449054906490749084909491049114912491349144915491649174918491949204921492249234924492549264927492849294930493149324933493449354936493749384939494049414942494349444945494649474948494949504951495249534954495549564957495849594960496149624963496449654966496749684969497049714972497349744975497649774978497949804981498249834984498549864987498849894990499149924993499449954996499749984999500050015002500350045005500650075008500950105011501250135014501550165017501850195020502150225023502450255026502750285029503050315032503350345035503650375038503950405041504250435044504550465047504850495050505150525053505450555056505750585059506050615062506350645065506650675068506950705071507250735074507550765077507850795080508150825083508450855086508750885089509050915092509350945095509650975098509951005101510251035104510551065107510851095110511151125113511451155116511751185119512051215122512351245125512651275128512951305131513251335134513551365137513851395140514151425143514451455146514751485149515051515152515351545155515651575158515951605161516251635164516551665167516851695170517151725173517451755176517751785179518051815182518351845185518651875188518951905191519251935194519551965197519851995200520152025203520452055206520752085209521052115212521352145215521652175218521952205221522252235224522552265227522852295230523152325233523452355236523752385239524052415242524352445245524652475248524952505251525252535254525552565257525852595260526152625263526452655266526752685269527052715272527352745275527652775278527952805281528252835284528552865287528852895290529152925293529452955296529752985299530053015302530353045305530653075308530953105311531253135314531553165317531853195320532153225323532453255326532753285329533053315332533353345335533653375338533953405341534253435344534553465347534853495350535153525353535453555356535753585359536053615362536353645365536653675368536953705371537253735374537553765377537853795380538153825383538453855386538753885389539053915392539353945395539653975398539954005401540254035404540554065407540854095410541154125413541454155416541754185419542054215422542354245425542654275428542954305431543254335434543554365437543854395440544154425443544454455446544754485449545054515452545354545455545654575458545954605461546254635464546554665467546854695470547154725473547454755476547754785479548054815482548354845485548654875488548954905491549254935494549554965497549854995500550155025503550455055506550755085509551055115512551355145515551655175518551955205521552255235524552555265527552855295530553155325533553455355536553755385539554055415542554355445545554655475548554955505551555255535554555555565557555855595560556155625563556455655566556755685569557055715572557355745575557655775578557955805581558255835584558555865587558855895590559155925593559455955596559755985599560056015602560356045605560656075608560956105611561256135614561556165617561856195620562156225623562456255626562756285629563056315632563356345635563656375638563956405641564256435644564556465647564856495650565156525653565456555656565756585659566056615662566356645665566656675668566956705671567256735674567556765677567856795680568156825683568456855686568756885689569056915692569356945695569656975698569957005701570257035704570557065707570857095710571157125713571457155716571757185719572057215722572357245725572657275728572957305731573257335734573557365737573857395740574157425743574457455746574757485749575057515752575357545755575657575758575957605761576257635764576557665767576857695770577157725773577457755776577757785779578057815782578357845785578657875788578957905791579257935794579557965797579857995800580158025803580458055806580758085809581058115812581358145815581658175818581958205821582258235824582558265827582858295830583158325833583458355836583758385839584058415842584358445845584658475848584958505851585258535854585558565857585858595860586158625863586458655866586758685869587058715872587358745875587658775878587958805881588258835884588558865887588858895890589158925893589458955896589758985899590059015902590359045905590659075908590959105911591259135914591559165917591859195920592159225923592459255926592759285929593059315932593359345935593659375938593959405941594259435944594559465947594859495950595159525953595459555956595759585959596059615962596359645965596659675968596959705971597259735974597559765977597859795980598159825983598459855986598759885989599059915992599359945995599659975998599960006001600260036004600560066007600860096010601160126013601460156016601760186019602060216022602360246025602660276028602960306031603260336034603560366037603860396040604160426043604460456046604760486049605060516052605360546055605660576058605960606061606260636064606560666067606860696070607160726073607460756076607760786079608060816082608360846085608660876088608960906091609260936094609560966097609860996100610161026103610461056106610761086109611061116112611361146115611661176118611961206121612261236124612561266127612861296130613161326133613461356136613761386139614061416142614361446145614661476148614961506151615261536154615561566157615861596160616161626163616461656166616761686169617061716172617361746175617661776178617961806181618261836184618561866187618861896190619161926193619461956196619761986199620062016202620362046205620662076208620962106211621262136214621562166217621862196220622162226223622462256226622762286229623062316232623362346235623662376238623962406241624262436244624562466247624862496250625162526253625462556256625762586259626062616262626362646265626662676268626962706271627262736274627562766277627862796280628162826283628462856286628762886289629062916292629362946295629662976298629963006301630263036304630563066307630863096310631163126313631463156316631763186319632063216322632363246325632663276328632963306331633263336334633563366337633863396340634163426343634463456346634763486349635063516352635363546355635663576358635963606361636263636364636563666367636863696370637163726373637463756376637763786379638063816382638363846385638663876388638963906391639263936394639563966397639863996400640164026403640464056406640764086409641064116412641364146415641664176418641964206421642264236424642564266427642864296430643164326433643464356436643764386439644064416442644364446445644664476448644964506451645264536454645564566457645864596460646164626463646464656466646764686469647064716472647364746475647664776478647964806481648264836484648564866487648864896490649164926493649464956496649764986499650065016502650365046505650665076508650965106511651265136514651565166517651865196520652165226523652465256526652765286529653065316532653365346535653665376538653965406541654265436544654565466547654865496550655165526553655465556556655765586559656065616562656365646565656665676568656965706571657265736574657565766577657865796580658165826583658465856586658765886589659065916592659365946595659665976598659966006601660266036604660566066607660866096610661166126613661466156616661766186619662066216622662366246625662666276628662966306631663266336634663566366637663866396640664166426643664466456646664766486649665066516652665366546655665666576658665966606661666266636664666566666667666866696670667166726673667466756676667766786679668066816682668366846685668666876688668966906691669266936694669566966697669866996700670167026703670467056706670767086709671067116712671367146715671667176718671967206721672267236724672567266727672867296730673167326733673467356736673767386739674067416742674367446745674667476748674967506751675267536754675567566757675867596760676167626763676467656766676767686769677067716772677367746775677667776778677967806781678267836784678567866787678867896790679167926793679467956796679767986799680068016802680368046805680668076808680968106811681268136814681568166817681868196820682168226823682468256826682768286829683068316832683368346835683668376838683968406841684268436844684568466847684868496850685168526853685468556856685768586859686068616862686368646865686668676868686968706871687268736874687568766877687868796880688168826883688468856886688768886889689068916892689368946895689668976898689969006901690269036904690569066907690869096910691169126913691469156916691769186919692069216922692369246925692669276928692969306931693269336934693569366937693869396940694169426943694469456946694769486949695069516952695369546955695669576958695969606961696269636964696569666967696869696970697169726973697469756976697769786979698069816982698369846985698669876988698969906991699269936994699569966997699869997000700170027003700470057006700770087009701070117012701370147015701670177018701970207021702270237024702570267027702870297030703170327033703470357036703770387039704070417042704370447045704670477048704970507051705270537054705570567057705870597060706170627063706470657066706770687069707070717072707370747075707670777078707970807081708270837084708570867087708870897090709170927093709470957096709770987099710071017102710371047105710671077108710971107111711271137114711571167117711871197120712171227123712471257126712771287129713071317132713371347135713671377138713971407141714271437144714571467147714871497150715171527153715471557156715771587159716071617162716371647165716671677168716971707171717271737174717571767177717871797180718171827183718471857186718771887189719071917192719371947195719671977198719972007201720272037204720572067207720872097210721172127213721472157216721772187219722072217222722372247225722672277228722972307231723272337234723572367237723872397240724172427243724472457246724772487249725072517252725372547255725672577258725972607261726272637264726572667267726872697270727172727273727472757276727772787279728072817282728372847285728672877288728972907291729272937294729572967297729872997300730173027303730473057306730773087309731073117312731373147315731673177318731973207321732273237324732573267327732873297330733173327333733473357336733773387339734073417342734373447345734673477348734973507351735273537354735573567357735873597360736173627363736473657366736773687369737073717372737373747375737673777378737973807381738273837384738573867387738873897390739173927393739473957396739773987399740074017402740374047405740674077408740974107411741274137414741574167417741874197420742174227423742474257426742774287429743074317432743374347435743674377438743974407441744274437444744574467447744874497450745174527453745474557456745774587459746074617462746374647465746674677468746974707471747274737474747574767477747874797480748174827483748474857486748774887489749074917492749374947495749674977498749975007501750275037504750575067507750875097510751175127513751475157516751775187519752075217522752375247525752675277528752975307531753275337534753575367537753875397540754175427543754475457546754775487549755075517552755375547555755675577558755975607561756275637564756575667567756875697570757175727573757475757576757775787579758075817582758375847585758675877588758975907591759275937594759575967597759875997600760176027603760476057606760776087609761076117612761376147615761676177618761976207621762276237624762576267627762876297630763176327633763476357636763776387639764076417642764376447645764676477648764976507651765276537654765576567657765876597660766176627663766476657666766776687669767076717672767376747675767676777678767976807681768276837684768576867687768876897690769176927693769476957696769776987699770077017702770377047705770677077708770977107711771277137714771577167717771877197720772177227723772477257726772777287729773077317732773377347735773677377738773977407741774277437744774577467747774877497750775177527753775477557756775777587759776077617762776377647765776677677768776977707771777277737774777577767777777877797780778177827783778477857786778777887789779077917792779377947795779677977798779978007801780278037804780578067807780878097810781178127813781478157816781778187819782078217822782378247825782678277828782978307831783278337834783578367837783878397840784178427843784478457846784778487849785078517852785378547855785678577858785978607861786278637864786578667867786878697870787178727873787478757876787778787879788078817882788378847885788678877888788978907891789278937894789578967897789878997900790179027903790479057906790779087909791079117912791379147915791679177918791979207921792279237924792579267927792879297930793179327933793479357936793779387939794079417942794379447945794679477948794979507951795279537954795579567957795879597960796179627963796479657966796779687969797079717972797379747975797679777978797979807981798279837984798579867987798879897990799179927993799479957996799779987999800080018002800380048005800680078008800980108011801280138014801580168017801880198020802180228023802480258026802780288029803080318032803380348035803680378038803980408041804280438044804580468047804880498050805180528053805480558056805780588059806080618062806380648065806680678068806980708071807280738074807580768077807880798080808180828083808480858086808780888089809080918092809380948095809680978098809981008101810281038104810581068107810881098110811181128113811481158116811781188119812081218122812381248125812681278128812981308131813281338134813581368137813881398140814181428143814481458146814781488149815081518152815381548155815681578158815981608161816281638164816581668167816881698170817181728173817481758176817781788179818081818182818381848185818681878188818981908191819281938194819581968197819881998200820182028203820482058206820782088209821082118212821382148215821682178218821982208221822282238224822582268227822882298230823182328233823482358236823782388239824082418242824382448245824682478248824982508251825282538254825582568257825882598260826182628263826482658266826782688269827082718272827382748275827682778278827982808281828282838284828582868287828882898290829182928293829482958296829782988299830083018302830383048305830683078308830983108311831283138314831583168317831883198320832183228323832483258326832783288329833083318332833383348335833683378338833983408341834283438344834583468347834883498350835183528353835483558356835783588359836083618362836383648365836683678368836983708371837283738374837583768377837883798380838183828383838483858386838783888389839083918392839383948395839683978398839984008401840284038404840584068407840884098410841184128413841484158416841784188419842084218422842384248425842684278428842984308431843284338434843584368437843884398440844184428443844484458446844784488449845084518452845384548455845684578458845984608461846284638464846584668467846884698470847184728473847484758476847784788479848084818482848384848485848684878488848984908491849284938494849584968497849884998500850185028503850485058506850785088509851085118512851385148515851685178518851985208521852285238524852585268527852885298530853185328533853485358536853785388539854085418542854385448545854685478548854985508551855285538554855585568557855885598560856185628563856485658566856785688569857085718572857385748575857685778578857985808581858285838584858585868587858885898590859185928593859485958596859785988599860086018602860386048605860686078608860986108611861286138614861586168617861886198620862186228623862486258626862786288629863086318632863386348635863686378638863986408641864286438644864586468647864886498650865186528653865486558656865786588659866086618662866386648665866686678668866986708671867286738674867586768677867886798680868186828683868486858686868786888689869086918692869386948695869686978698869987008701870287038704870587068707870887098710871187128713871487158716871787188719872087218722872387248725872687278728872987308731873287338734873587368737873887398740874187428743874487458746874787488749875087518752875387548755875687578758875987608761876287638764876587668767876887698770877187728773877487758776877787788779878087818782878387848785878687878788878987908791879287938794879587968797879887998800880188028803880488058806880788088809881088118812881388148815881688178818881988208821882288238824882588268827882888298830883188328833883488358836883788388839884088418842884388448845884688478848884988508851885288538854885588568857885888598860886188628863886488658866886788688869887088718872887388748875887688778878887988808881888288838884888588868887888888898890889188928893889488958896889788988899890089018902890389048905890689078908890989108911891289138914891589168917891889198920892189228923892489258926892789288929893089318932893389348935893689378938893989408941894289438944894589468947894889498950895189528953895489558956895789588959896089618962896389648965896689678968896989708971897289738974897589768977897889798980898189828983898489858986898789888989899089918992899389948995899689978998899990009001900290039004900590069007900890099010901190129013901490159016901790189019902090219022902390249025902690279028902990309031903290339034903590369037903890399040904190429043904490459046904790489049905090519052905390549055905690579058905990609061906290639064906590669067906890699070907190729073907490759076907790789079908090819082908390849085908690879088908990909091909290939094909590969097909890999100910191029103910491059106910791089109911091119112911391149115911691179118911991209121912291239124912591269127912891299130913191329133913491359136913791389139914091419142914391449145914691479148914991509151915291539154915591569157915891599160916191629163916491659166916791689169917091719172917391749175917691779178917991809181918291839184918591869187918891899190919191929193919491959196919791989199920092019202920392049205920692079208920992109211921292139214921592169217921892199220922192229223922492259226922792289229923092319232923392349235923692379238923992409241924292439244924592469247924892499250925192529253925492559256925792589259926092619262926392649265926692679268926992709271927292739274927592769277927892799280928192829283928492859286928792889289929092919292929392949295929692979298929993009301930293039304930593069307930893099310931193129313931493159316931793189319932093219322932393249325932693279328932993309331933293339334933593369337933893399340934193429343934493459346934793489349935093519352935393549355935693579358935993609361936293639364936593669367936893699370937193729373937493759376937793789379938093819382938393849385938693879388938993909391939293939394939593969397939893999400940194029403940494059406940794089409941094119412941394149415941694179418941994209421942294239424942594269427942894299430943194329433943494359436943794389439944094419442944394449445944694479448944994509451945294539454945594569457945894599460946194629463946494659466946794689469947094719472947394749475947694779478947994809481948294839484948594869487948894899490949194929493949494959496949794989499950095019502950395049505950695079508950995109511951295139514951595169517951895199520952195229523952495259526952795289529953095319532953395349535953695379538953995409541954295439544954595469547954895499550955195529553955495559556955795589559956095619562956395649565956695679568956995709571957295739574957595769577957895799580958195829583958495859586958795889589959095919592959395949595959695979598959996009601960296039604960596069607960896099610961196129613961496159616961796189619962096219622962396249625962696279628962996309631963296339634963596369637963896399640964196429643964496459646964796489649965096519652965396549655965696579658965996609661966296639664966596669667966896699670967196729673967496759676967796789679968096819682968396849685968696879688968996909691969296939694969596969697969896999700970197029703970497059706970797089709971097119712971397149715971697179718971997209721972297239724972597269727972897299730973197329733973497359736973797389739974097419742974397449745974697479748974997509751975297539754975597569757975897599760976197629763976497659766976797689769977097719772977397749775977697779778977997809781978297839784978597869787978897899790979197929793979497959796979797989799980098019802980398049805980698079808980998109811981298139814981598169817981898199820982198229823982498259826982798289829983098319832983398349835983698379838983998409841984298439844984598469847984898499850985198529853985498559856985798589859986098619862986398649865986698679868986998709871987298739874987598769877987898799880988198829883988498859886988798889889989098919892989398949895989698979898989999009901990299039904990599069907990899099910991199129913991499159916991799189919992099219922992399249925992699279928992999309931993299339934993599369937993899399940994199429943994499459946994799489949995099519952995399549955995699579958995999609961996299639964996599669967996899699970997199729973997499759976997799789979998099819982998399849985998699879988998999909991999299939994999599969997999899991000010001100021000310004100051000610007100081000910010100111001210013100141001510016100171001810019100201002110022100231002410025100261002710028100291003010031100321003310034100351003610037100381003910040100411004210043100441004510046100471004810049100501005110052100531005410055100561005710058100591006010061100621006310064100651006610067100681006910070100711007210073100741007510076100771007810079100801008110082100831008410085100861008710088100891009010091100921009310094100951009610097100981009910100101011010210103101041010510106101071010810109101101011110112101131011410115101161011710118101191012010121101221012310124101251012610127101281012910130101311013210133101341013510136101371013810139101401014110142101431014410145101461014710148101491015010151101521015310154101551015610157101581015910160101611016210163101641016510166101671016810169101701017110172101731017410175101761017710178101791018010181101821018310184101851018610187101881018910190101911019210193101941019510196101971019810199102001020110202102031020410205102061020710208102091021010211102121021310214102151021610217102181021910220102211022210223102241022510226102271022810229102301023110232102331023410235102361023710238102391024010241102421024310244102451024610247102481024910250102511025210253102541025510256102571025810259102601026110262102631026410265102661026710268102691027010271102721027310274102751027610277102781027910280102811028210283102841028510286102871028810289102901029110292102931029410295102961029710298102991030010301103021030310304103051030610307103081030910310103111031210313103141031510316103171031810319103201032110322103231032410325103261032710328103291033010331103321033310334103351033610337103381033910340103411034210343103441034510346103471034810349103501035110352103531035410355103561035710358103591036010361103621036310364103651036610367103681036910370103711037210373103741037510376103771037810379103801038110382103831038410385103861038710388103891039010391103921039310394103951039610397103981039910400104011040210403104041040510406104071040810409104101041110412104131041410415104161041710418104191042010421104221042310424104251042610427104281042910430104311043210433104341043510436104371043810439104401044110442104431044410445104461044710448104491045010451104521045310454104551045610457104581045910460104611046210463104641046510466104671046810469104701047110472104731047410475104761047710478104791048010481104821048310484104851048610487104881048910490104911049210493104941049510496104971049810499105001050110502105031050410505105061050710508105091051010511105121051310514105151051610517105181051910520105211052210523105241052510526105271052810529105301053110532105331053410535105361053710538105391054010541105421054310544105451054610547105481054910550105511055210553105541055510556105571055810559105601056110562105631056410565105661056710568105691057010571105721057310574105751057610577105781057910580105811058210583105841058510586105871058810589105901059110592105931059410595105961059710598105991060010601106021060310604106051060610607106081060910610106111061210613106141061510616106171061810619106201062110622106231062410625106261062710628106291063010631106321063310634106351063610637106381063910640106411064210643106441064510646106471064810649106501065110652106531065410655106561065710658106591066010661106621066310664106651066610667106681066910670106711067210673106741067510676106771067810679106801068110682106831068410685106861068710688106891069010691106921069310694106951069610697106981069910700107011070210703107041070510706107071070810709107101071110712107131071410715107161071710718107191072010721107221072310724107251072610727107281072910730107311073210733107341073510736107371073810739107401074110742107431074410745107461074710748107491075010751107521075310754107551075610757107581075910760107611076210763107641076510766107671076810769107701077110772107731077410775107761077710778107791078010781107821078310784107851078610787107881078910790107911079210793107941079510796107971079810799108001080110802108031080410805108061080710808108091081010811108121081310814108151081610817108181081910820108211082210823108241082510826108271082810829108301083110832108331083410835108361083710838108391084010841108421084310844108451084610847108481084910850108511085210853108541085510856108571085810859108601086110862108631086410865108661086710868108691087010871108721087310874108751087610877108781087910880108811088210883108841088510886108871088810889108901089110892108931089410895108961089710898108991090010901109021090310904109051090610907109081090910910109111091210913109141091510916109171091810919109201092110922109231092410925109261092710928109291093010931109321093310934109351093610937109381093910940109411094210943109441094510946109471094810949109501095110952109531095410955109561095710958109591096010961109621096310964109651096610967109681096910970109711097210973109741097510976109771097810979109801098110982109831098410985109861098710988109891099010991109921099310994109951099610997109981099911000110011100211003110041100511006110071100811009110101101111012110131101411015110161101711018110191102011021110221102311024110251102611027110281102911030110311103211033110341103511036110371103811039110401104111042110431104411045110461104711048110491105011051110521105311054110551105611057110581105911060110611106211063110641106511066110671106811069110701107111072110731107411075110761107711078110791108011081110821108311084110851108611087110881108911090110911109211093110941109511096110971109811099111001110111102111031110411105111061110711108111091111011111111121111311114111151111611117111181111911120111211112211123111241112511126111271112811129111301113111132111331113411135111361113711138111391114011141111421114311144111451114611147111481114911150111511115211153111541115511156111571115811159111601116111162111631116411165111661116711168111691117011171111721117311174111751117611177111781117911180111811118211183111841118511186111871118811189111901119111192111931119411195111961119711198111991120011201112021120311204112051120611207112081120911210112111121211213112141121511216112171121811219112201122111222112231122411225112261122711228112291123011231112321123311234112351123611237112381123911240112411124211243112441124511246112471124811249112501125111252112531125411255112561125711258112591126011261112621126311264112651126611267112681126911270112711127211273112741127511276112771127811279112801128111282112831128411285112861128711288112891129011291112921129311294112951129611297112981129911300113011130211303113041130511306113071130811309113101131111312113131131411315113161131711318113191132011321113221132311324113251132611327113281132911330113311133211333113341133511336113371133811339113401134111342113431134411345113461134711348113491135011351113521135311354113551135611357113581135911360113611136211363113641136511366113671136811369113701137111372113731137411375113761137711378113791138011381113821138311384113851138611387113881138911390113911139211393113941139511396113971139811399114001140111402114031140411405114061140711408114091141011411114121141311414114151141611417114181141911420114211142211423114241142511426114271142811429114301143111432114331143411435114361143711438114391144011441114421144311444114451144611447114481144911450114511145211453114541145511456114571145811459114601146111462114631146411465114661146711468114691147011471114721147311474114751147611477114781147911480114811148211483114841148511486114871148811489114901149111492114931149411495114961149711498114991150011501115021150311504115051150611507115081150911510115111151211513115141151511516115171151811519115201152111522115231152411525115261152711528115291153011531115321153311534115351153611537115381153911540115411154211543115441154511546115471154811549115501155111552115531155411555115561155711558115591156011561115621156311564115651156611567115681156911570115711157211573115741157511576115771157811579115801158111582115831158411585115861158711588115891159011591115921159311594115951159611597115981159911600116011160211603116041160511606116071160811609116101161111612116131161411615116161161711618116191162011621116221162311624116251162611627116281162911630116311163211633116341163511636116371163811639116401164111642116431164411645116461164711648116491165011651116521165311654116551165611657116581165911660116611166211663116641166511666116671166811669116701167111672116731167411675116761167711678116791168011681116821168311684116851168611687116881168911690116911169211693116941169511696116971169811699117001170111702117031170411705117061170711708117091171011711117121171311714117151171611717117181171911720117211172211723117241172511726117271172811729117301173111732117331173411735117361173711738117391174011741117421174311744117451174611747117481174911750117511175211753117541175511756117571175811759117601176111762117631176411765117661176711768117691177011771117721177311774117751177611777117781177911780117811178211783117841178511786117871178811789117901179111792117931179411795117961179711798117991180011801118021180311804118051180611807118081180911810118111181211813118141181511816118171181811819118201182111822118231182411825118261182711828118291183011831118321183311834118351183611837118381183911840118411184211843118441184511846118471184811849118501185111852118531185411855118561185711858118591186011861118621186311864118651186611867118681186911870118711187211873118741187511876118771187811879118801188111882118831188411885118861188711888118891189011891118921189311894118951189611897118981189911900119011190211903119041190511906119071190811909119101191111912119131191411915119161191711918119191192011921119221192311924119251192611927119281192911930119311193211933119341193511936119371193811939119401194111942119431194411945119461194711948119491195011951119521195311954119551195611957119581195911960119611196211963119641196511966119671196811969119701197111972119731197411975119761197711978119791198011981119821198311984119851198611987119881198911990119911199211993119941199511996119971199811999120001200112002120031200412005120061200712008120091201012011120121201312014120151201612017120181201912020120211202212023120241202512026120271202812029120301203112032120331203412035120361203712038120391204012041120421204312044120451204612047120481204912050120511205212053120541205512056120571205812059120601206112062120631206412065120661206712068120691207012071120721207312074120751207612077120781207912080120811208212083120841208512086120871208812089120901209112092120931209412095120961209712098120991210012101121021210312104121051210612107121081210912110121111211212113121141211512116121171211812119121201212112122121231212412125121261212712128121291213012131121321213312134121351213612137121381213912140121411214212143121441214512146121471214812149121501215112152121531215412155121561215712158121591216012161121621216312164121651216612167121681216912170121711217212173121741217512176121771217812179121801218112182121831218412185121861218712188121891219012191121921219312194121951219612197121981219912200122011220212203122041220512206122071220812209122101221112212122131221412215122161221712218122191222012221122221222312224122251222612227122281222912230122311223212233122341223512236122371223812239122401224112242122431224412245122461224712248122491225012251122521225312254122551225612257122581225912260122611226212263122641226512266122671226812269122701227112272122731227412275122761227712278122791228012281122821228312284122851228612287122881228912290122911229212293122941229512296122971229812299123001230112302123031230412305123061230712308123091231012311123121231312314123151231612317123181231912320123211232212323123241232512326123271232812329123301233112332123331233412335123361233712338123391234012341123421234312344123451234612347123481234912350123511235212353123541235512356123571235812359123601236112362123631236412365123661236712368123691237012371123721237312374123751237612377123781237912380123811238212383123841238512386123871238812389123901239112392123931239412395123961239712398123991240012401124021240312404124051240612407124081240912410124111241212413124141241512416124171241812419124201242112422124231242412425124261242712428124291243012431124321243312434124351243612437124381243912440124411244212443124441244512446124471244812449124501245112452124531245412455124561245712458124591246012461124621246312464124651246612467124681246912470124711247212473124741247512476124771247812479124801248112482124831248412485124861248712488124891249012491124921249312494124951249612497124981249912500125011250212503125041250512506125071250812509125101251112512125131251412515125161251712518125191252012521125221252312524125251252612527125281252912530125311253212533125341253512536125371253812539125401254112542125431254412545125461254712548125491255012551125521255312554125551255612557125581255912560125611256212563125641256512566125671256812569125701257112572125731257412575125761257712578125791258012581125821258312584125851258612587125881258912590125911259212593125941259512596125971259812599126001260112602126031260412605126061260712608126091261012611126121261312614126151261612617126181261912620126211262212623126241262512626126271262812629126301263112632126331263412635126361263712638126391264012641126421264312644126451264612647126481264912650126511265212653126541265512656126571265812659126601266112662126631266412665126661266712668126691267012671126721267312674126751267612677126781267912680126811268212683126841268512686126871268812689126901269112692126931269412695126961269712698126991270012701127021270312704127051270612707127081270912710127111271212713127141271512716127171271812719127201272112722127231272412725127261272712728127291273012731127321273312734127351273612737127381273912740127411274212743127441274512746127471274812749127501275112752127531275412755127561275712758127591276012761127621276312764127651276612767127681276912770127711277212773127741277512776127771277812779127801278112782127831278412785127861278712788127891279012791127921279312794127951279612797127981279912800128011280212803128041280512806128071280812809128101281112812128131281412815128161281712818128191282012821128221282312824128251282612827128281282912830128311283212833128341283512836128371283812839128401284112842128431284412845128461284712848128491285012851128521285312854128551285612857128581285912860128611286212863128641286512866128671286812869128701287112872128731287412875128761287712878128791288012881128821288312884128851288612887128881288912890128911289212893128941289512896128971289812899129001290112902129031290412905129061290712908129091291012911129121291312914129151291612917129181291912920129211292212923129241292512926129271292812929129301293112932129331293412935129361293712938129391294012941129421294312944129451294612947129481294912950129511295212953129541295512956129571295812959129601296112962129631296412965129661296712968129691297012971129721297312974129751297612977129781297912980129811298212983129841298512986129871298812989129901299112992129931299412995129961299712998129991300013001130021300313004130051300613007130081300913010130111301213013130141301513016130171301813019130201302113022130231302413025130261302713028130291303013031130321303313034130351303613037130381303913040130411304213043130441304513046130471304813049130501305113052130531305413055130561305713058130591306013061130621306313064130651306613067130681306913070130711307213073130741307513076130771307813079130801308113082130831308413085130861308713088130891309013091130921309313094130951309613097130981309913100131011310213103131041310513106131071310813109131101311113112131131311413115131161311713118131191312013121131221312313124131251312613127131281312913130131311313213133131341313513136131371313813139131401314113142131431314413145131461314713148131491315013151131521315313154131551315613157131581315913160131611316213163131641316513166131671316813169131701317113172131731317413175131761317713178131791318013181131821318313184131851318613187131881318913190131911319213193131941319513196131971319813199132001320113202132031320413205132061320713208132091321013211132121321313214132151321613217132181321913220132211322213223132241322513226132271322813229132301323113232132331323413235132361323713238132391324013241132421324313244132451324613247132481324913250132511325213253132541325513256132571325813259132601326113262132631326413265132661326713268132691327013271132721327313274132751327613277132781327913280132811328213283132841328513286132871328813289132901329113292132931329413295132961329713298132991330013301133021330313304133051330613307133081330913310133111331213313133141331513316133171331813319133201332113322133231332413325133261332713328133291333013331133321333313334133351333613337133381333913340133411334213343133441334513346133471334813349133501335113352133531335413355133561335713358133591336013361133621336313364133651336613367133681336913370133711337213373133741337513376133771337813379133801338113382133831338413385133861338713388133891339013391133921339313394133951339613397133981339913400134011340213403134041340513406134071340813409134101341113412134131341413415134161341713418134191342013421134221342313424134251342613427134281342913430134311343213433134341343513436134371343813439134401344113442134431344413445134461344713448134491345013451134521345313454134551345613457134581345913460134611346213463134641346513466134671346813469134701347113472134731347413475134761347713478134791348013481134821348313484134851348613487134881348913490134911349213493134941349513496134971349813499135001350113502135031350413505135061350713508135091351013511135121351313514135151351613517135181351913520135211352213523135241352513526135271352813529135301353113532135331353413535135361353713538135391354013541135421354313544135451354613547135481354913550135511355213553135541355513556135571355813559135601356113562135631356413565135661356713568135691357013571135721357313574135751357613577135781357913580135811358213583135841358513586135871358813589135901359113592135931359413595135961359713598135991360013601136021360313604136051360613607136081360913610136111361213613136141361513616136171361813619136201362113622136231362413625136261362713628136291363013631136321363313634136351363613637136381363913640136411364213643136441364513646136471364813649136501365113652136531365413655136561365713658136591366013661136621366313664136651366613667136681366913670136711367213673136741367513676136771367813679136801368113682136831368413685136861368713688136891369013691136921369313694136951369613697136981369913700137011370213703137041370513706137071370813709137101371113712137131371413715137161371713718137191372013721137221372313724137251372613727137281372913730137311373213733137341373513736137371373813739137401374113742137431374413745137461374713748137491375013751137521375313754137551375613757137581375913760137611376213763137641376513766137671376813769137701377113772137731377413775137761377713778137791378013781137821378313784137851378613787137881378913790137911379213793137941379513796137971379813799138001380113802138031380413805138061380713808138091381013811138121381313814138151381613817138181381913820138211382213823138241382513826138271382813829138301383113832138331383413835138361383713838138391384013841138421384313844138451384613847138481384913850138511385213853138541385513856138571385813859138601386113862138631386413865138661386713868138691387013871138721387313874138751387613877138781387913880138811388213883138841388513886138871388813889138901389113892138931389413895138961389713898138991390013901139021390313904139051390613907139081390913910139111391213913139141391513916139171391813919139201392113922139231392413925139261392713928139291393013931139321393313934139351393613937139381393913940139411394213943139441394513946139471394813949139501395113952139531395413955139561395713958139591396013961139621396313964139651396613967139681396913970139711397213973139741397513976139771397813979139801398113982139831398413985139861398713988139891399013991139921399313994139951399613997139981399914000140011400214003140041400514006140071400814009140101401114012140131401414015140161401714018140191402014021140221402314024140251402614027140281402914030140311403214033140341403514036140371403814039140401404114042140431404414045140461404714048140491405014051140521405314054140551405614057140581405914060140611406214063140641406514066140671406814069140701407114072140731407414075140761407714078140791408014081140821408314084140851408614087140881408914090140911409214093140941409514096140971409814099141001410114102141031410414105141061410714108141091411014111141121411314114141151411614117141181411914120141211412214123141241412514126141271412814129141301413114132141331413414135141361413714138141391414014141141421414314144141451414614147141481414914150141511415214153141541415514156141571415814159141601416114162141631416414165141661416714168141691417014171141721417314174141751417614177141781417914180141811418214183141841418514186141871418814189141901419114192141931419414195141961419714198141991420014201142021420314204142051420614207142081420914210142111421214213142141421514216142171421814219142201422114222142231422414225142261422714228142291423014231142321423314234142351423614237142381423914240142411424214243142441424514246142471424814249142501425114252142531425414255142561425714258142591426014261142621426314264142651426614267142681426914270142711427214273142741427514276142771427814279142801428114282142831428414285142861428714288142891429014291142921429314294142951429614297142981429914300143011430214303143041430514306143071430814309143101431114312143131431414315143161431714318143191432014321143221432314324143251432614327143281432914330143311433214333143341433514336143371433814339143401434114342143431434414345143461434714348143491435014351143521435314354143551435614357143581435914360143611436214363143641436514366143671436814369143701437114372143731437414375143761437714378143791438014381143821438314384143851438614387143881438914390143911439214393143941439514396143971439814399144001440114402144031440414405144061440714408144091441014411144121441314414144151441614417144181441914420144211442214423144241442514426144271442814429144301443114432144331443414435144361443714438144391444014441144421444314444144451444614447144481444914450144511445214453144541445514456144571445814459144601446114462144631446414465144661446714468144691447014471144721447314474144751447614477144781447914480144811448214483144841448514486144871448814489144901449114492144931449414495144961449714498144991450014501145021450314504145051450614507145081450914510145111451214513145141451514516145171451814519145201452114522145231452414525145261452714528145291453014531145321453314534145351453614537145381453914540145411454214543145441454514546145471454814549145501455114552145531455414555145561455714558145591456014561145621456314564145651456614567145681456914570145711457214573145741457514576145771457814579145801458114582145831458414585145861458714588145891459014591145921459314594145951459614597145981459914600146011460214603146041460514606146071460814609146101461114612146131461414615146161461714618146191462014621146221462314624146251462614627146281462914630146311463214633146341463514636146371463814639146401464114642146431464414645146461464714648146491465014651146521465314654146551465614657146581465914660146611466214663146641466514666146671466814669146701467114672146731467414675146761467714678146791468014681146821468314684146851468614687146881468914690146911469214693146941469514696146971469814699147001470114702147031470414705147061470714708147091471014711147121471314714147151471614717147181471914720147211472214723147241472514726147271472814729147301473114732147331473414735147361473714738147391474014741147421474314744147451474614747147481474914750147511475214753147541475514756147571475814759147601476114762147631476414765147661476714768147691477014771147721477314774147751477614777147781477914780147811478214783147841478514786147871478814789147901479114792147931479414795147961479714798147991480014801148021480314804148051480614807148081480914810148111481214813148141481514816148171481814819148201482114822148231482414825148261482714828148291483014831148321483314834148351483614837148381483914840148411484214843148441484514846148471484814849148501485114852148531485414855148561485714858148591486014861148621486314864148651486614867148681486914870148711487214873148741487514876148771487814879148801488114882148831488414885148861488714888148891489014891148921489314894148951489614897148981489914900149011490214903149041490514906149071490814909149101491114912149131491414915149161491714918149191492014921149221492314924149251492614927149281492914930149311493214933149341493514936149371493814939149401494114942149431494414945149461494714948149491495014951149521495314954149551495614957149581495914960149611496214963149641496514966149671496814969149701497114972149731497414975149761497714978149791498014981149821498314984149851498614987149881498914990149911499214993149941499514996149971499814999150001500115002150031500415005150061500715008150091501015011150121501315014150151501615017150181501915020150211502215023150241502515026150271502815029150301503115032150331503415035150361503715038150391504015041150421504315044150451504615047150481504915050150511505215053150541505515056150571505815059150601506115062150631506415065150661506715068150691507015071150721507315074150751507615077150781507915080150811508215083150841508515086150871508815089150901509115092150931509415095150961509715098150991510015101151021510315104151051510615107151081510915110151111511215113151141511515116151171511815119151201512115122151231512415125151261512715128151291513015131151321513315134151351513615137151381513915140151411514215143151441514515146151471514815149151501515115152151531515415155151561515715158151591516015161151621516315164151651516615167151681516915170151711517215173151741517515176151771517815179151801518115182151831518415185151861518715188151891519015191151921519315194151951519615197151981519915200152011520215203152041520515206152071520815209152101521115212152131521415215152161521715218152191522015221152221522315224152251522615227152281522915230152311523215233152341523515236152371523815239152401524115242152431524415245152461524715248152491525015251152521525315254152551525615257152581525915260152611526215263152641526515266152671526815269152701527115272152731527415275152761527715278152791528015281152821528315284152851528615287152881528915290152911529215293152941529515296152971529815299153001530115302153031530415305153061530715308153091531015311153121531315314153151531615317153181531915320153211532215323153241532515326153271532815329153301533115332153331533415335153361533715338153391534015341153421534315344153451534615347153481534915350153511535215353153541535515356153571535815359153601536115362153631536415365153661536715368153691537015371153721537315374153751537615377153781537915380153811538215383153841538515386153871538815389153901539115392153931539415395153961539715398153991540015401154021540315404154051540615407154081540915410154111541215413154141541515416154171541815419154201542115422154231542415425154261542715428154291543015431154321543315434154351543615437154381543915440154411544215443154441544515446154471544815449154501545115452154531545415455154561545715458154591546015461154621546315464154651546615467154681546915470154711547215473154741547515476154771547815479154801548115482154831548415485154861548715488154891549015491154921549315494154951549615497154981549915500155011550215503155041550515506155071550815509155101551115512155131551415515155161551715518155191552015521155221552315524155251552615527155281552915530155311553215533155341553515536155371553815539155401554115542155431554415545155461554715548155491555015551155521555315554155551555615557155581555915560155611556215563155641556515566155671556815569155701557115572155731557415575155761557715578155791558015581155821558315584155851558615587155881558915590155911559215593155941559515596155971559815599156001560115602156031560415605156061560715608156091561015611156121561315614156151561615617156181561915620156211562215623156241562515626156271562815629156301563115632156331563415635156361563715638156391564015641156421564315644156451564615647156481564915650156511565215653156541565515656156571565815659156601566115662156631566415665156661566715668156691567015671156721567315674156751567615677156781567915680156811568215683156841568515686156871568815689156901569115692156931569415695156961569715698156991570015701157021570315704157051570615707157081570915710157111571215713157141571515716157171571815719157201572115722157231572415725157261572715728157291573015731157321573315734157351573615737157381573915740157411574215743157441574515746157471574815749157501575115752157531575415755157561575715758157591576015761157621576315764157651576615767157681576915770157711577215773157741577515776157771577815779157801578115782157831578415785157861578715788157891579015791157921579315794157951579615797157981579915800158011580215803158041580515806158071580815809158101581115812158131581415815158161581715818158191582015821158221582315824158251582615827158281582915830158311583215833158341583515836158371583815839158401584115842158431584415845158461584715848158491585015851158521585315854158551585615857158581585915860158611586215863158641586515866158671586815869158701587115872158731587415875158761587715878158791588015881158821588315884158851588615887158881588915890158911589215893158941589515896158971589815899159001590115902159031590415905159061590715908159091591015911159121591315914159151591615917159181591915920159211592215923159241592515926159271592815929159301593115932159331593415935159361593715938159391594015941159421594315944159451594615947159481594915950159511595215953159541595515956159571595815959159601596115962159631596415965159661596715968159691597015971159721597315974159751597615977159781597915980159811598215983159841598515986159871598815989159901599115992159931599415995159961599715998159991600016001160021600316004160051600616007160081600916010160111601216013160141601516016160171601816019160201602116022160231602416025160261602716028160291603016031160321603316034160351603616037160381603916040160411604216043160441604516046160471604816049160501605116052160531605416055160561605716058160591606016061160621606316064160651606616067160681606916070160711607216073160741607516076160771607816079160801608116082160831608416085160861608716088160891609016091160921609316094160951609616097160981609916100161011610216103161041610516106161071610816109161101611116112161131611416115161161611716118161191612016121161221612316124161251612616127161281612916130161311613216133161341613516136161371613816139161401614116142161431614416145161461614716148161491615016151161521615316154161551615616157161581615916160161611616216163161641616516166161671616816169161701617116172161731617416175161761617716178161791618016181161821618316184161851618616187161881618916190161911619216193161941619516196161971619816199162001620116202162031620416205162061620716208162091621016211162121621316214162151621616217162181621916220162211622216223162241622516226162271622816229162301623116232162331623416235162361623716238162391624016241162421624316244162451624616247162481624916250162511625216253162541625516256162571625816259162601626116262162631626416265162661626716268162691627016271162721627316274162751627616277162781627916280162811628216283162841628516286162871628816289162901629116292162931629416295162961629716298162991630016301163021630316304163051630616307163081630916310163111631216313163141631516316163171631816319163201632116322163231632416325163261632716328163291633016331163321633316334163351633616337163381633916340163411634216343163441634516346163471634816349163501635116352163531635416355163561635716358163591636016361163621636316364163651636616367163681636916370163711637216373163741637516376163771637816379163801638116382163831638416385163861638716388163891639016391163921639316394163951639616397163981639916400164011640216403164041640516406164071640816409164101641116412164131641416415164161641716418164191642016421164221642316424164251642616427164281642916430164311643216433164341643516436164371643816439164401644116442164431644416445164461644716448164491645016451164521645316454164551645616457164581645916460164611646216463164641646516466164671646816469164701647116472164731647416475164761647716478164791648016481164821648316484164851648616487164881648916490164911649216493164941649516496164971649816499165001650116502165031650416505165061650716508165091651016511165121651316514165151651616517165181651916520165211652216523165241652516526165271652816529165301653116532165331653416535165361653716538165391654016541165421654316544165451654616547165481654916550165511655216553165541655516556165571655816559165601656116562165631656416565165661656716568165691657016571165721657316574165751657616577165781657916580165811658216583165841658516586165871658816589165901659116592165931659416595165961659716598165991660016601166021660316604166051660616607166081660916610166111661216613166141661516616166171661816619166201662116622166231662416625166261662716628166291663016631166321663316634166351663616637166381663916640166411664216643166441664516646166471664816649166501665116652166531665416655166561665716658166591666016661166621666316664166651666616667166681666916670166711667216673166741667516676166771667816679166801668116682166831668416685166861668716688166891669016691166921669316694166951669616697166981669916700167011670216703167041670516706167071670816709167101671116712167131671416715167161671716718167191672016721167221672316724167251672616727167281672916730167311673216733167341673516736167371673816739167401674116742167431674416745167461674716748167491675016751167521675316754167551675616757167581675916760167611676216763167641676516766167671676816769167701677116772167731677416775167761677716778167791678016781167821678316784167851678616787167881678916790167911679216793167941679516796167971679816799168001680116802168031680416805168061680716808168091681016811168121681316814168151681616817168181681916820168211682216823168241682516826168271682816829168301683116832168331683416835168361683716838168391684016841168421684316844168451684616847168481684916850168511685216853168541685516856168571685816859168601686116862168631686416865168661686716868168691687016871168721687316874168751687616877168781687916880168811688216883168841688516886168871688816889168901689116892168931689416895168961689716898168991690016901169021690316904169051690616907169081690916910169111691216913169141691516916169171691816919169201692116922169231692416925169261692716928169291693016931169321693316934169351693616937169381693916940169411694216943169441694516946169471694816949169501695116952169531695416955169561695716958169591696016961169621696316964169651696616967169681696916970169711697216973169741697516976169771697816979169801698116982169831698416985169861698716988169891699016991169921699316994169951699616997169981699917000170011700217003170041700517006170071700817009170101701117012170131701417015170161701717018170191702017021170221702317024170251702617027170281702917030170311703217033170341703517036170371703817039170401704117042170431704417045170461704717048170491705017051170521705317054170551705617057170581705917060170611706217063170641706517066170671706817069170701707117072170731707417075170761707717078170791708017081170821708317084170851708617087170881708917090170911709217093170941709517096170971709817099171001710117102171031710417105171061710717108171091711017111171121711317114171151711617117171181711917120171211712217123171241712517126171271712817129171301713117132171331713417135171361713717138171391714017141171421714317144171451714617147171481714917150171511715217153171541715517156171571715817159171601716117162171631716417165171661716717168171691717017171171721717317174171751717617177171781717917180171811718217183171841718517186171871718817189171901719117192171931719417195171961719717198171991720017201172021720317204172051720617207172081720917210172111721217213172141721517216172171721817219172201722117222172231722417225172261722717228172291723017231172321723317234172351723617237172381723917240172411724217243172441724517246172471724817249172501725117252172531725417255172561725717258172591726017261172621726317264172651726617267172681726917270172711727217273172741727517276172771727817279172801728117282172831728417285172861728717288172891729017291172921729317294172951729617297172981729917300173011730217303173041730517306173071730817309173101731117312173131731417315173161731717318173191732017321173221732317324173251732617327173281732917330173311733217333173341733517336173371733817339173401734117342173431734417345173461734717348173491735017351173521735317354173551735617357173581735917360173611736217363173641736517366173671736817369173701737117372173731737417375173761737717378173791738017381173821738317384173851738617387173881738917390173911739217393173941739517396173971739817399174001740117402174031740417405174061740717408174091741017411174121741317414174151741617417174181741917420174211742217423174241742517426174271742817429174301743117432174331743417435174361743717438174391744017441174421744317444174451744617447174481744917450174511745217453174541745517456174571745817459174601746117462174631746417465174661746717468174691747017471174721747317474174751747617477174781747917480174811748217483174841748517486174871748817489174901749117492174931749417495174961749717498174991750017501175021750317504175051750617507175081750917510175111751217513175141751517516175171751817519175201752117522175231752417525175261752717528175291753017531175321753317534175351753617537175381753917540175411754217543175441754517546175471754817549175501755117552175531755417555175561755717558175591756017561175621756317564175651756617567175681756917570175711757217573175741757517576175771757817579175801758117582175831758417585175861758717588175891759017591175921759317594175951759617597175981759917600176011760217603176041760517606176071760817609176101761117612176131761417615176161761717618176191762017621176221762317624176251762617627176281762917630176311763217633176341763517636176371763817639176401764117642176431764417645176461764717648176491765017651176521765317654176551765617657176581765917660176611766217663176641766517666176671766817669176701767117672176731767417675176761767717678176791768017681176821768317684176851768617687176881768917690176911769217693176941769517696176971769817699177001770117702177031770417705177061770717708177091771017711177121771317714177151771617717177181771917720177211772217723177241772517726177271772817729177301773117732177331773417735177361773717738177391774017741177421774317744177451774617747177481774917750177511775217753177541775517756177571775817759177601776117762177631776417765177661776717768177691777017771177721777317774177751777617777177781777917780177811778217783177841778517786177871778817789177901779117792177931779417795177961779717798177991780017801178021780317804178051780617807178081780917810178111781217813178141781517816178171781817819178201782117822178231782417825178261782717828178291783017831178321783317834178351783617837178381783917840178411784217843178441784517846178471784817849178501785117852178531785417855178561785717858178591786017861178621786317864178651786617867178681786917870178711787217873178741787517876178771787817879178801788117882178831788417885178861788717888178891789017891178921789317894178951789617897178981789917900179011790217903179041790517906179071790817909179101791117912179131791417915179161791717918179191792017921179221792317924179251792617927179281792917930179311793217933179341793517936179371793817939179401794117942179431794417945179461794717948179491795017951179521795317954179551795617957179581795917960179611796217963179641796517966179671796817969179701797117972179731797417975179761797717978179791798017981179821798317984179851798617987179881798917990179911799217993179941799517996179971799817999180001800118002180031800418005180061800718008180091801018011180121801318014180151801618017180181801918020180211802218023180241802518026180271802818029180301803118032180331803418035180361803718038180391804018041180421804318044180451804618047180481804918050180511805218053180541805518056180571805818059180601806118062180631806418065180661806718068180691807018071180721807318074180751807618077180781807918080180811808218083180841808518086180871808818089180901809118092180931809418095180961809718098180991810018101181021810318104181051810618107181081810918110181111811218113181141811518116181171811818119181201812118122181231812418125181261812718128181291813018131181321813318134181351813618137181381813918140181411814218143181441814518146181471814818149181501815118152181531815418155181561815718158181591816018161181621816318164181651816618167181681816918170181711817218173181741817518176181771817818179181801818118182181831818418185181861818718188181891819018191181921819318194181951819618197181981819918200182011820218203182041820518206182071820818209182101821118212182131821418215182161821718218182191822018221182221822318224182251822618227182281822918230182311823218233182341823518236182371823818239182401824118242182431824418245182461824718248182491825018251182521825318254182551825618257182581825918260182611826218263182641826518266182671826818269182701827118272182731827418275182761827718278182791828018281182821828318284182851828618287182881828918290182911829218293182941829518296182971829818299183001830118302183031830418305183061830718308183091831018311183121831318314183151831618317183181831918320183211832218323183241832518326183271832818329183301833118332183331833418335183361833718338183391834018341183421834318344183451834618347183481834918350183511835218353183541835518356183571835818359183601836118362183631836418365183661836718368183691837018371183721837318374183751837618377183781837918380183811838218383183841838518386183871838818389183901839118392183931839418395183961839718398183991840018401184021840318404184051840618407184081840918410184111841218413184141841518416184171841818419184201842118422184231842418425184261842718428184291843018431184321843318434184351843618437184381843918440184411844218443184441844518446184471844818449184501845118452184531845418455184561845718458184591846018461184621846318464184651846618467184681846918470184711847218473184741847518476184771847818479184801848118482184831848418485184861848718488184891849018491184921849318494184951849618497184981849918500185011850218503185041850518506185071850818509185101851118512185131851418515185161851718518185191852018521185221852318524185251852618527185281852918530185311853218533185341853518536185371853818539185401854118542185431854418545185461854718548185491855018551185521855318554185551855618557185581855918560185611856218563185641856518566185671856818569185701857118572185731857418575185761857718578185791858018581185821858318584185851858618587185881858918590185911859218593185941859518596185971859818599186001860118602186031860418605186061860718608186091861018611186121861318614186151861618617186181861918620186211862218623186241862518626186271862818629186301863118632186331863418635186361863718638186391864018641186421864318644186451864618647186481864918650186511865218653186541865518656186571865818659186601866118662186631866418665186661866718668186691867018671186721867318674186751867618677186781867918680186811868218683186841868518686186871868818689186901869118692186931869418695186961869718698186991870018701187021870318704187051870618707187081870918710187111871218713187141871518716187171871818719187201872118722187231872418725187261872718728187291873018731187321873318734187351873618737187381873918740187411874218743187441874518746187471874818749187501875118752187531875418755187561875718758187591876018761187621876318764187651876618767187681876918770187711877218773187741877518776187771877818779187801878118782187831878418785187861878718788187891879018791187921879318794187951879618797187981879918800188011880218803188041880518806188071880818809188101881118812188131881418815188161881718818188191882018821188221882318824188251882618827188281882918830188311883218833188341883518836188371883818839188401884118842188431884418845188461884718848188491885018851188521885318854188551885618857188581885918860188611886218863188641886518866188671886818869188701887118872188731887418875188761887718878188791888018881188821888318884188851888618887188881888918890188911889218893188941889518896188971889818899189001890118902189031890418905189061890718908189091891018911189121891318914189151891618917189181891918920189211892218923189241892518926189271892818929189301893118932189331893418935189361893718938189391894018941189421894318944189451894618947189481894918950189511895218953189541895518956189571895818959189601896118962189631896418965189661896718968189691897018971189721897318974189751897618977189781897918980189811898218983189841898518986189871898818989189901899118992189931899418995189961899718998189991900019001190021900319004190051900619007190081900919010190111901219013190141901519016190171901819019190201902119022190231902419025190261902719028190291903019031190321903319034190351903619037190381903919040190411904219043190441904519046190471904819049190501905119052190531905419055190561905719058190591906019061190621906319064190651906619067190681906919070190711907219073190741907519076190771907819079190801908119082190831908419085190861908719088190891909019091190921909319094190951909619097190981909919100191011910219103191041910519106191071910819109191101911119112191131911419115191161911719118191191912019121191221912319124191251912619127191281912919130191311913219133191341913519136191371913819139191401914119142191431914419145191461914719148191491915019151191521915319154191551915619157191581915919160191611916219163191641916519166191671916819169191701917119172191731917419175191761917719178191791918019181191821918319184191851918619187191881918919190191911919219193191941919519196191971919819199192001920119202192031920419205192061920719208192091921019211192121921319214192151921619217192181921919220192211922219223192241922519226192271922819229192301923119232192331923419235192361923719238192391924019241192421924319244192451924619247192481924919250192511925219253192541925519256192571925819259192601926119262192631926419265192661926719268192691927019271192721927319274192751927619277192781927919280192811928219283192841928519286192871928819289192901929119292192931929419295192961929719298192991930019301193021930319304193051930619307193081930919310193111931219313193141931519316193171931819319193201932119322193231932419325193261932719328193291933019331193321933319334193351933619337193381933919340193411934219343193441934519346193471934819349193501935119352193531935419355193561935719358193591936019361193621936319364193651936619367193681936919370193711937219373193741937519376193771937819379193801938119382193831938419385193861938719388193891939019391193921939319394193951939619397193981939919400194011940219403194041940519406194071940819409194101941119412194131941419415194161941719418194191942019421194221942319424194251942619427194281942919430194311943219433194341943519436194371943819439194401944119442194431944419445194461944719448194491945019451194521945319454194551945619457194581945919460194611946219463194641946519466194671946819469194701947119472194731947419475194761947719478194791948019481194821948319484194851948619487194881948919490194911949219493194941949519496194971949819499195001950119502195031950419505195061950719508195091951019511195121951319514195151951619517195181951919520195211952219523195241952519526195271952819529195301953119532195331953419535195361953719538195391954019541195421954319544195451954619547195481954919550195511955219553195541955519556195571955819559195601956119562195631956419565195661956719568195691957019571195721957319574195751957619577195781957919580195811958219583195841958519586195871958819589195901959119592195931959419595195961959719598195991960019601196021960319604196051960619607196081960919610196111961219613196141961519616196171961819619196201962119622196231962419625196261962719628196291963019631196321963319634196351963619637196381963919640196411964219643196441964519646196471964819649196501965119652196531965419655196561965719658196591966019661196621966319664196651966619667196681966919670196711967219673196741967519676196771967819679196801968119682196831968419685196861968719688196891969019691196921969319694196951969619697196981969919700197011970219703197041970519706197071970819709197101971119712197131971419715197161971719718197191972019721197221972319724197251972619727197281972919730197311973219733197341973519736197371973819739197401974119742197431974419745197461974719748197491975019751197521975319754197551975619757197581975919760197611976219763197641976519766197671976819769197701977119772197731977419775197761977719778197791978019781197821978319784197851978619787197881978919790197911979219793197941979519796197971979819799198001980119802198031980419805198061980719808198091981019811198121981319814198151981619817198181981919820198211982219823198241982519826198271982819829198301983119832198331983419835198361983719838198391984019841198421984319844198451984619847198481984919850198511985219853198541985519856198571985819859198601986119862198631986419865198661986719868198691987019871198721987319874198751987619877198781987919880198811988219883198841988519886198871988819889198901989119892198931989419895198961989719898198991990019901199021990319904199051990619907199081990919910199111991219913199141991519916199171991819919199201992119922199231992419925199261992719928199291993019931199321993319934199351993619937199381993919940199411994219943199441994519946199471994819949199501995119952199531995419955199561995719958199591996019961199621996319964199651996619967199681996919970199711997219973 | 
							- <?xml version="1.0"?>
 
- <doc>
 
-     <assembly>
 
-         <name>Quartz</name>
 
-     </assembly>
 
-     <members>
 
-         <member name="T:Quartz.Collection.HashSet`1">
 
-             <summary>
 
-             A wrapper for generic HashSet that brings a common interface.
 
-             </summary>
 
-             <typeparam name="T"></typeparam>
 
-         </member>
 
-         <member name="T:Quartz.Collection.ISet`1">
 
-             <summary>
 
-             Represents a collection ob objects that contains no duplicate elements.
 
-             </summary>	
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Collection.ISortedSet`1">
 
-             <summary>
 
-             A sorted set.
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Collection.ISortedSet`1.TailSet(`0)">
 
-             <summary>
 
-             Returns a portion of the list whose elements are greater than the limit object parameter.
 
-             </summary>
 
-             <param name="limit">The start element of the portion to extract.</param>
 
-             <returns>The portion of the collection whose elements are greater than the limit object parameter.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Collection.ISortedSet`1.First">
 
-             <summary>
 
-             Returns the first item in the set.
 
-             </summary>
 
-             <returns>First object.</returns>
 
-         </member>
 
-         <member name="P:Quartz.Collection.ISortedSet`1.Item(System.Int32)">
 
-             <summary>
 
-             Returns the object in the specified index.
 
-             </summary>
 
-             <param name="index"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Collection.ReadOnlySet`1.#ctor(Quartz.Collection.ISet{`0})">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Collection.ReadOnlySet`1"/> class.
 
-             </summary>
 
-             <param name="internalSet">The internal set to wrap.</param>
 
-             <exception cref="T:System.ArgumentNullException">internalSet</exception>
 
-         </member>
 
-         <member name="T:Quartz.Collection.TreeSet`1">
 
-             <summary>
 
-             Simple C5 wrapper for common interface.
 
-             </summary>
 
-             <typeparam name="T"></typeparam>
 
-         </member>
 
-         <member name="M:Quartz.Collection.TreeSet`1.#ctor">
 
-             <summary>
 
-             Default constructor.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Collection.TreeSet`1.#ctor(System.Collections.Generic.IComparer{`0})">
 
-             <summary>
 
-             Constructor that accepts comparer.
 
-             </summary>
 
-             <param name="comparer">Comparer to use.</param>
 
-         </member>
 
-         <member name="M:Quartz.Collection.TreeSet`1.#ctor(System.Collections.Generic.IEnumerable{`0})">
 
-             <summary>
 
-             Constructor that prepopulates.
 
-             </summary>
 
-             <param name="items"></param>
 
-         </member>
 
-         <member name="M:Quartz.Collection.TreeSet`1.First">
 
-             <summary>
 
-             Returns the first element.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Collection.TreeSet`1.TailSet(`0)">
 
-             <summary>
 
-             Return items from given range.
 
-             </summary>
 
-             <param name="limit"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Collection.TreeSet`1.Quartz#Collection#ISortedSet{T}#Item(System.Int32)">
 
-             <summary>
 
-             Indexer.
 
-             </summary>
 
-             <param name="index"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Collection.TreeSet">
 
-             <summary>
 
-             Only for backwards compatibility with serialization!
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Core.IJobRunShellFactory">
 
-             <summary>
 
-             Responsible for creating the instances of <see cref="T:Quartz.Core.JobRunShell"/>
 
-             to be used within the <see cref="T:Quartz.Core.QuartzScheduler"/> instance.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Core.IJobRunShellFactory.Initialize(Quartz.IScheduler)">
 
-             <summary>
 
-             Initialize the factory, providing a handle to the <see cref="T:Quartz.IScheduler"/>
 
-             that should be made available within the <see cref="T:Quartz.Core.JobRunShell"/> and 
 
-             the <see cref="T:Quartz.IJobExecutionContext"/>s within it.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.IJobRunShellFactory.CreateJobRunShell(Quartz.Spi.TriggerFiredBundle)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.Core.QuartzSchedulerThread"/>
 
-             to obtain instances of <see cref="T:Quartz.Core.JobRunShell"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Core.JobRunShell">
 
-             <summary> 
 
-             JobRunShell instances are responsible for providing the 'safe' environment
 
-             for <see cref="T:Quartz.IJob"/> s to run in, and for performing all of the work of
 
-             executing the <see cref="T:Quartz.IJob"/>, catching ANY thrown exceptions, updating
 
-             the <see cref="T:Quartz.ITrigger"/> with the <see cref="T:Quartz.IJob"/>'s completion code,
 
-             etc.
 
-             <para>
 
-             A <see cref="T:Quartz.Core.JobRunShell"/> instance is created by a <see cref="T:Quartz.Core.IJobRunShellFactory"/>
 
-             on behalf of the <see cref="T:Quartz.Core.QuartzSchedulerThread"/> which then runs the
 
-             shell in a thread from the configured <see cref="T:System.Threading.ThreadPool"/> when the
 
-             scheduler determines that a <see cref="T:Quartz.IJob"/> has been triggered.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="T:Quartz.Core.IJobRunShellFactory"/> 
 
-             <seealso cref="T:Quartz.Core.QuartzSchedulerThread"/>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Listener.SchedulerListenerSupport">
 
-             <summary>
 
-              A helpful abstract base class for implementors of 
 
-             <see cref="T:Quartz.ISchedulerListener"/>.
 
-             </summary>
 
-             <remarks>
 
-             The methods in this class are empty so you only need to override the  
 
-             subset for the <see cref="T:Quartz.ISchedulerListener"/> events you care about.
 
-             </remarks>
 
-             <author>Marko Lahma (.NET)</author>
 
-             <seealso cref="T:Quartz.ISchedulerListener"/>
 
-         </member>
 
-         <member name="T:Quartz.ISchedulerListener">
 
-             <summary>
 
-             The interface to be implemented by classes that want to be informed of major
 
-             <see cref="T:Quartz.IScheduler"/> events.
 
-             </summary>
 
-             <seealso cref="T:Quartz.IScheduler"/>
 
-             <seealso cref="T:Quartz.IJobListener"/>
 
-             <seealso cref="T:Quartz.ITriggerListener"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.JobScheduled(Quartz.ITrigger)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             is scheduled.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.JobUnscheduled(Quartz.TriggerKey)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             is unscheduled.
 
-             </summary>
 
-             <seealso cref="M:Quartz.ISchedulerListener.SchedulingDataCleared"/>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.TriggerFinalized(Quartz.ITrigger)">
 
-             <summary> 
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             has reached the condition in which it will never fire again.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.TriggerPaused(Quartz.TriggerKey)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> a <see cref="T:Quartz.ITrigger"/>s has been paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.TriggersPaused(System.String)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> a group of 
 
-             <see cref="T:Quartz.ITrigger"/>s has been paused.
 
-             </summary>
 
-             <remarks>
 
-             If a all groups were paused, then the <see param="triggerName"/> parameter
 
-             will be null.
 
-             </remarks>
 
-             <param name="triggerGroup">The trigger group.</param>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.TriggerResumed(Quartz.TriggerKey)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             has been un-paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.TriggersResumed(System.String)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a
 
-             group of <see cref="T:Quartz.ITrigger"/>s has been un-paused.
 
-             </summary>
 
-             <remarks>
 
-             If all groups were resumed, then the <see param="triggerName"/> parameter
 
-             will be null.
 
-             </remarks>
 
-             <param name="triggerGroup">The trigger group.</param>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.JobAdded(Quartz.IJobDetail)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             has been added.
 
-             </summary>
 
-             <param name="jobDetail"></param>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.JobDeleted(Quartz.JobKey)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             has been deleted.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.JobPaused(Quartz.JobKey)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             has been  paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.JobsPaused(System.String)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a
 
-             group of <see cref="T:Quartz.IJobDetail"/>s has been  paused.
 
-             <para>
 
-             If all groups were paused, then the <see param="jobName"/> parameter will be
 
-             null. If all jobs were paused, then both parameters will be null.
 
-             </para>
 
-             </summary>
 
-             <param name="jobGroup">The job group.</param>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.JobResumed(Quartz.JobKey)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             has been  un-paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.JobsResumed(System.String)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             has been  un-paused.
 
-             </summary>
 
-             <param name="jobGroup">The job group.</param>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.SchedulerError(System.String,Quartz.SchedulerException)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a serious error has
 
-             occurred within the scheduler - such as repeated failures in the <see cref="T:Quartz.Spi.IJobStore"/>,
 
-             or the inability to instantiate a <see cref="T:Quartz.IJob"/> instance when its
 
-             <see cref="T:Quartz.ITrigger"/> has fired.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.SchedulerInStandbyMode">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> to inform the listener
 
-             that it has move to standby mode.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.SchedulerStarted">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> to inform the listener
 
-             that it has started.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.SchedulerStarting">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> to inform the listener that it is starting.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.SchedulerShutdown">
 
-             <summary> 
 
-             Called by the <see cref="T:Quartz.IScheduler"/> to inform the listener
 
-             that it has Shutdown.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.SchedulerShuttingdown">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> to inform the listener
 
-             that it has begun the shutdown sequence.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerListener.SchedulingDataCleared">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> to inform the listener
 
-             that all jobs, triggers and calendars were deleted.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Listener.SchedulerListenerSupport.Log">
 
-             <summary>
 
-             Get the <see cref="T:Common.Logging.ILog"/> for this
 
-             type's category.  This should be used by subclasses for logging.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.IThreadRunnable">
 
-             <summary>
 
-             This interface should be implemented by any class whose instances are intended 
 
-             to be executed by a thread.
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.IThreadRunnable.Run">
 
-             <summary>
 
-             This method has to be implemented in order that starting of the thread causes the object's 
 
-             run method to be called in that separately executing thread.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.JobRunShell.#ctor(Quartz.IScheduler,Quartz.Spi.TriggerFiredBundle)">
 
-             <summary>
 
-             Create a JobRunShell instance with the given settings.
 
-             </summary>
 
-             <param name="scheduler">The <see cref="T:Quartz.IScheduler"/> instance that should be made
 
-             available within the <see cref="T:Quartz.IJobExecutionContext"/>.</param>
 
-             <param name="bundle"></param>
 
-         </member>
 
-         <member name="M:Quartz.Core.JobRunShell.Initialize(Quartz.Core.QuartzScheduler)">
 
-             <summary>
 
-             Initializes the job execution context with given scheduler and bundle.
 
-             </summary>
 
-             <param name="sched">The scheduler.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.JobRunShell.RequestShutdown">
 
-             <summary>
 
-             Requests the Shutdown.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.JobRunShell.Run">
 
-             <summary>
 
-             This method has to be implemented in order that starting of the thread causes the object's
 
-             run method to be called in that separately executing thread.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.JobRunShell.Begin">
 
-             <summary>
 
-             Runs begin procedures on this instance.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.JobRunShell.Complete(System.Boolean)">
 
-             <summary>
 
-             Completes the execution.
 
-             </summary>
 
-             <param name="successfulExecution">if set to <c>true</c> [successful execution].</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.JobRunShell.Passivate">
 
-             <summary>
 
-             Passivates this instance.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Core.ListenerManagerImpl">
 
-             <summary>
 
-             Default concrete implementation of <see cref="T:Quartz.IListenerManager"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.IListenerManager">
 
-             <summary>
 
-             Client programs may be interested in the 'listener' interfaces that are
 
-             available from Quartz. The <see cref="T:Quartz.IJobListener"/> interface
 
-             provides notifications of Job executions. The
 
-             <see cref="T:Quartz.ITriggerListener"/> interface provides notifications of
 
-             <see cref="T:Quartz.ITrigger"/> firings. The <see cref="T:Quartz.ISchedulerListener"/>
 
-             interface provides notifications of scheduler events and
 
-             errors.  Listeners can be associated with local schedulers through the
 
-             <see cref="T:Quartz.IListenerManager"/> interface.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <author>jhouse</author>
 
-             <since>2.0 - previously listeners were managed directly on the Scheduler interface.</since>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.AddJobListener(Quartz.IJobListener,Quartz.IMatcher{Quartz.JobKey}[])">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.IJobListener"/> to the<see cref="T:Quartz.IScheduler"/>,
 
-             and register it to receive events for Jobs that are matched by ANY of the
 
-             given Matchers.
 
-             </summary>
 
-             <remarks>
 
-             If no matchers are provided, the <see cref="T:Quartz.Impl.Matchers.EverythingMatcher`1"/> will be used.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IMatcher`1"/>
 
-             <seealso cref="T:Quartz.Impl.Matchers.EverythingMatcher`1"/>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.AddJobListener(Quartz.IJobListener,System.Collections.Generic.IList{Quartz.IMatcher{Quartz.JobKey}})">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.IJobListener"/> to the<see cref="T:Quartz.IScheduler"/>,
 
-             and register it to receive events for Jobs that are matched by ANY of the
 
-             given Matchers.
 
-             </summary>
 
-             <remarks>
 
-             If no matchers are provided, the <see cref="T:Quartz.Impl.Matchers.EverythingMatcher`1"/> will be used.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IMatcher`1"/>
 
-             <seealso cref="T:Quartz.Impl.Matchers.EverythingMatcher`1"/>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.AddJobListenerMatcher(System.String,Quartz.IMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Add the given Matcher to the set of matchers for which the listener
 
-             will receive events if ANY of the matchers match.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="listenerName">the name of the listener to add the matcher to</param>
 
-             <param name="matcher">the additional matcher to apply for selecting events</param>
 
-             <returns>true if the identified listener was found and updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.RemoveJobListenerMatcher(System.String,Quartz.IMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Remove the given Matcher to the set of matchers for which the listener
 
-             will receive events if ANY of the matchers match.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="listenerName">the name of the listener to add the matcher to</param>
 
-             <param name="matcher">the additional matcher to apply for selecting events</param>
 
-             <returns>true if the given matcher was found and removed from the listener's list of matchers</returns>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.SetJobListenerMatchers(System.String,System.Collections.Generic.IList{Quartz.IMatcher{Quartz.JobKey}})">
 
-             <summary>
 
-             Set the set of Matchers for which the listener
 
-             will receive events if ANY of the matchers match.
 
-             </summary>
 
-             <remarks>
 
-             <para>Removes any existing matchers for the identified listener!</para>
 
-             </remarks>
 
-             <param name="listenerName">the name of the listener to add the matcher to</param>
 
-             <param name="matchers">the matchers to apply for selecting events</param>
 
-             <returns>true if the given matcher was found and removed from the listener's list of matchers</returns>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.GetJobListenerMatchers(System.String)">
 
-             <summary>
 
-             Get the set of Matchers for which the listener
 
-             will receive events if ANY of the matchers match.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="listenerName">the name of the listener to add the matcher to</param>
 
-             <returns>the matchers registered for selecting events for the identified listener</returns>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.RemoveJobListener(System.String)">
 
-             <summary>
 
-             Remove the identified <see cref="T:Quartz.IJobListener"/> from the<see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>true if the identified listener was found in the list, and removed.</returns>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.GetJobListeners">
 
-             <summary>
 
-             Get a List containing all of the <see cref="T:Quartz.IJobListener"/>s in
 
-             the<see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.GetJobListener(System.String)">
 
-             <summary>
 
-             Get the <see cref="T:Quartz.IJobListener"/> that has the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.AddTriggerListener(Quartz.ITriggerListener,Quartz.IMatcher{Quartz.TriggerKey}[])">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.ITriggerListener"/> to the<see cref="T:Quartz.IScheduler"/>,
 
-             and register it to receive events for Triggers that are matched by ANY of the
 
-             given Matchers.
 
-             </summary>
 
-             <remarks>
 
-             If no matcher is provided, the <see cref="T:Quartz.Impl.Matchers.EverythingMatcher`1"/> will be used.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IMatcher`1"/>
 
-             <seealso cref="T:Quartz.Impl.Matchers.EverythingMatcher`1"/>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.AddTriggerListener(Quartz.ITriggerListener,System.Collections.Generic.IList{Quartz.IMatcher{Quartz.TriggerKey}})">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.ITriggerListener"/> to the<see cref="T:Quartz.IScheduler"/>,
 
-             and register it to receive events for Triggers that are matched by ANY of the
 
-             given Matchers.
 
-             </summary>
 
-             <remarks>
 
-             If no matcher is provided, the <see cref="T:Quartz.Impl.Matchers.EverythingMatcher`1"/> will be used.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IMatcher`1"/>
 
-             <seealso cref="T:Quartz.Impl.Matchers.EverythingMatcher`1"/>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.AddTriggerListenerMatcher(System.String,Quartz.IMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Add the given Matcher to the set of matchers for which the listener
 
-             will receive events if ANY of the matchers match.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="listenerName">the name of the listener to add the matcher to</param>
 
-             <param name="matcher">the additional matcher to apply for selecting events</param>
 
-             <returns>true if the identified listener was found and updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.RemoveTriggerListenerMatcher(System.String,Quartz.IMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Remove the given Matcher to the set of matchers for which the listener
 
-             will receive events if ANY of the matchers match.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="listenerName">the name of the listener to add the matcher to</param>
 
-             <param name="matcher">the additional matcher to apply for selecting events</param>
 
-             <returns>true if the given matcher was found and removed from the listener's list of matchers</returns>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.SetTriggerListenerMatchers(System.String,System.Collections.Generic.IList{Quartz.IMatcher{Quartz.TriggerKey}})">
 
-             <summary>
 
-             Set the set of Matchers for which the listener
 
-             will receive events if ANY of the matchers match.
 
-             </summary>
 
-             <remarks>
 
-             <para>Removes any existing matchers for the identified listener!</para>
 
-             </remarks>
 
-             <param name="listenerName">the name of the listener to add the matcher to</param>
 
-             <param name="matchers">the matchers to apply for selecting events</param>
 
-             <returns>true if the given matcher was found and removed from the listener's list of matchers</returns>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.GetTriggerListenerMatchers(System.String)">
 
-             <summary>
 
-             Get the set of Matchers for which the listener
 
-             will receive events if ANY of the matchers match.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="listenerName">the name of the listener to add the matcher to</param>
 
-             <returns>the matchers registered for selecting events for the identified listener</returns>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.RemoveTriggerListener(System.String)">
 
-             <summary>
 
-             Remove the identified <see cref="T:Quartz.ITriggerListener"/> from the<see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>true if the identified listener was found in the list, and</returns>
 
-             removed.
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.GetTriggerListeners">
 
-             <summary>
 
-             Get a List containing all of the <see cref="T:Quartz.ITriggerListener"/>s
 
-             in the<see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.GetTriggerListener(System.String)">
 
-             <summary>
 
-             Get the <see cref="T:Quartz.ITriggerListener"/> that has the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.AddSchedulerListener(Quartz.ISchedulerListener)">
 
-              <summary>
 
-              Register the given <see cref="T:Quartz.ISchedulerListener"/> with the
 
-             <see cref="T:Quartz.IScheduler"/>.
 
-              </summary>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.RemoveSchedulerListener(Quartz.ISchedulerListener)">
 
-              <summary>
 
-              Remove the given <see cref="T:Quartz.ISchedulerListener"/> from the
 
-             <see cref="T:Quartz.IScheduler"/>.
 
-              </summary>
 
-              <remarks>
 
-              </remarks>
 
-              <returns>true if the identified listener was found in the list, and removed.</returns>
 
-         </member>
 
-         <member name="M:Quartz.IListenerManager.GetSchedulerListeners">
 
-             <summary>
 
-             Get a List containing all of the <see cref="T:Quartz.ISchedulerListener"/>s
 
-             registered with the<see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Core.QuartzScheduler">
 
-             <summary>
 
-             This is the heart of Quartz, an indirect implementation of the <see cref="T:Quartz.IScheduler"/>
 
-             interface, containing methods to schedule <see cref="T:Quartz.IJob"/>s,
 
-             register <see cref="T:Quartz.IJobListener"/> instances, etc.
 
-             </summary>
 
-             <seealso cref="T:Quartz.IScheduler"/>
 
-             <seealso cref="T:Quartz.Core.QuartzSchedulerThread"/>
 
-             <seealso cref="T:Quartz.Spi.IJobStore"/>
 
-             <seealso cref="T:Quartz.Spi.IThreadPool"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.IRemotableQuartzScheduler">
 
-             <summary>
 
-             Remote scheduler service interface.
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.IRemotableQuartzScheduler.Start">
 
-             <summary>
 
-             Starts this instance.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.IRemotableQuartzScheduler.Standby">
 
-             <summary>
 
-             Standbies this instance.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.IRemotableQuartzScheduler.Shutdown">
 
-             <summary>
 
-             Shutdowns this instance.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.IRemotableQuartzScheduler.IsJobGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given JobGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.IRemotableQuartzScheduler.IsTriggerGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given TriggerGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.#cctor">
 
-             <summary>
 
-             Initializes the <see cref="T:Quartz.Core.QuartzScheduler"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.AddInternalSchedulerListener(Quartz.ISchedulerListener)">
 
-             <summary>
 
-             Register the given <see cref="T:Quartz.ISchedulerListener"/> with the
 
-             <see cref="T:Quartz.IScheduler"/>'s list of internal listeners.
 
-             </summary>
 
-             <param name="schedulerListener"></param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.RemoveInternalSchedulerListener(Quartz.ISchedulerListener)">
 
-             <summary>
 
-             Remove the given <see cref="T:Quartz.ISchedulerListener"/> from the
 
-             <see cref="T:Quartz.IScheduler"/>'s list of internal listeners.
 
-             </summary>
 
-             <param name="schedulerListener"></param>
 
-             <returns>true if the identified listener was found in the list, andremoved.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.#ctor(Quartz.Core.QuartzSchedulerResources,System.TimeSpan)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Core.QuartzScheduler"/> with the given configuration
 
-             properties.
 
-             </summary>
 
-             <seealso cref="T:Quartz.Core.QuartzSchedulerResources"/>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.Bind">
 
-             <summary>
 
-             Bind the scheduler to remoting infrastructure.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.UnBind">
 
-             <summary>
 
-             Un-bind the scheduler from remoting infrastructure.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.AddNoGCObject(System.Object)">
 
-             <summary>
 
-             Adds an object that should be kept as reference to prevent
 
-             it from being garbage collected.
 
-             </summary>
 
-             <param name="obj">The obj.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.RemoveNoGCObject(System.Object)">
 
-             <summary>
 
-             Removes the object from garbage collection protected list.
 
-             </summary>
 
-             <param name="obj">The obj.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.Start">
 
-             <summary>
 
-             Starts the <see cref="T:Quartz.Core.QuartzScheduler"/>'s threads that fire <see cref="T:Quartz.ITrigger"/>s.
 
-             <para>
 
-             All <see cref="T:Quartz.ITrigger"/>s that have misfired will
 
-             be passed to the appropriate TriggerListener(s).
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.Standby">
 
-             <summary>
 
-             Temporarily halts the <see cref="T:Quartz.Core.QuartzScheduler"/>'s firing of <see cref="T:Quartz.ITrigger"/>s.
 
-             <para>
 
-             The scheduler is not destroyed, and can be re-started at any time.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.Shutdown">
 
-             <summary>
 
-             Halts the <see cref="T:Quartz.Core.QuartzScheduler"/>'s firing of <see cref="T:Quartz.ITrigger"/>s,
 
-             and cleans up all resources associated with the QuartzScheduler.
 
-             Equivalent to <see cref="M:Quartz.Core.QuartzScheduler.Shutdown(System.Boolean)"/>.
 
-             <para>
 
-             The scheduler cannot be re-started.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.Shutdown(System.Boolean)">
 
-             <summary>
 
-             Halts the <see cref="T:Quartz.Core.QuartzScheduler"/>'s firing of <see cref="T:Quartz.ITrigger"/>s,
 
-             and cleans up all resources associated with the QuartzScheduler.
 
-             <para>
 
-             The scheduler cannot be re-started.
 
-             </para>
 
-             </summary>
 
-             <param name="waitForJobsToComplete">
 
-             if <see langword="true"/> the scheduler will not allow this method
 
-             to return until all currently executing jobs have completed.
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.ValidateState">
 
-             <summary>
 
-             Validates the state.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.ScheduleJob(Quartz.IJobDetail,Quartz.ITrigger)">
 
-             <summary> 
 
-             Add the <see cref="T:Quartz.IJob"/> identified by the given
 
-             <see cref="T:Quartz.IJobDetail"/> to the Scheduler, and
 
-             associate the given <see cref="T:Quartz.ITrigger"/> with it.
 
-             <para>
 
-             If the given Trigger does not reference any <see cref="T:Quartz.IJob"/>, then it
 
-             will be set to reference the Job passed with it into this method.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.ScheduleJob(Quartz.ITrigger)">
 
-             <summary>
 
-             Schedule the given <see cref="T:Quartz.ITrigger"/> with the
 
-             <see cref="T:Quartz.IJob"/> identified by the <see cref="T:Quartz.ITrigger"/>'s settings.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.AddJob(Quartz.IJobDetail,System.Boolean)">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.IJob"/> to the Scheduler - with no associated
 
-             <see cref="T:Quartz.ITrigger"/>. The <see cref="T:Quartz.IJob"/> will be 'dormant' until
 
-             it is scheduled with a <see cref="T:Quartz.ITrigger"/>, or <see cref="M:Quartz.IScheduler.TriggerJob(Quartz.JobKey)"/>
 
-             is called for it.
 
-             <para>
 
-             The <see cref="T:Quartz.IJob"/> must by definition be 'durable', if it is not,
 
-             SchedulerException will be thrown.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.DeleteJob(Quartz.JobKey)">
 
-             <summary>
 
-             Delete the identified <see cref="T:Quartz.IJob"/> from the Scheduler - and any
 
-             associated <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-             <returns> true if the Job was found and deleted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.UnscheduleJob(Quartz.TriggerKey)">
 
-             <summary>
 
-             Remove the indicated <see cref="T:Quartz.ITrigger"/> from the
 
-             scheduler.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.RescheduleJob(Quartz.TriggerKey,Quartz.ITrigger)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.ITrigger"/> with the
 
-             given name, and store the new given one - which must be associated
 
-             with the same job.
 
-             </summary>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <param name="newTrigger">The new <see cref="T:Quartz.ITrigger"/> to be stored.</param>
 
-             <returns>
 
-             	<see langword="null"/> if a <see cref="T:Quartz.ITrigger"/> with the given
 
-             name and group was not found and removed from the store, otherwise
 
-             the first fire time of the newly scheduled trigger.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NextLong(System.Random)">
 
-             <summary>
 
-             Creates a new positive random number 
 
-             </summary>
 
-             <param name="random">The last random obtained</param>
 
-             <returns>Returns a new positive random number</returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.TriggerJob(Quartz.JobKey,Quartz.JobDataMap)">
 
-             <summary>
 
-             Trigger the identified <see cref="T:Quartz.IJob"/> (Execute it now) - with a non-volatile trigger.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.TriggerJob(Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Store and schedule the identified <see cref="T:Quartz.Spi.IOperableTrigger"/>
 
-             </summary>
 
-             <param name="trig"></param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.PauseTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Pause the <see cref="T:Quartz.ITrigger"/> with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.ITrigger"/>s in the given group.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.PauseJob(Quartz.JobKey)">
 
-             <summary> 
 
-             Pause the <see cref="T:Quartz.IJobDetail"/> with the given
 
-             name - by pausing all of its current <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.PauseJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.IJobDetail"/>s in the
 
-             given group - by pausing all of their <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.ResumeTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Resume (un-pause) the <see cref="T:Quartz.ITrigger"/> with the given
 
-             name.
 
-             <para>
 
-             If the <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Resume (un-pause) all of the <see cref="T:Quartz.ITrigger"/>s in the
 
-             matching groups.
 
-             <para>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetPausedTriggerGroups">
 
-             <summary>
 
-             Gets the paused trigger groups.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.ResumeJob(Quartz.JobKey)">
 
-             <summary>
 
-             Resume (un-pause) the <see cref="T:Quartz.IJobDetail"/> with
 
-             the given name.
 
-             <para>
 
-             If any of the <see cref="T:Quartz.IJob"/>'s<see cref="T:Quartz.ITrigger"/> s missed one
 
-             or more fire-times, then the <see cref="T:Quartz.ITrigger"/>'s misfire
 
-             instruction will be applied.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.ResumeJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Resume (un-pause) all of the <see cref="T:Quartz.IJobDetail"/>s
 
-             in the matching groups.
 
-             <para>
 
-             If any of the <see cref="T:Quartz.IJob"/> s had <see cref="T:Quartz.ITrigger"/> s that
 
-             missed one or more fire-times, then the <see cref="T:Quartz.ITrigger"/>'s
 
-             misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.PauseAll">
 
-             <summary>
 
-             Pause all triggers - equivalent of calling <see cref="M:Quartz.Core.QuartzScheduler.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             with a matcher matching all known groups.
 
-             <para>
 
-             When <see cref="M:Quartz.Core.QuartzScheduler.ResumeAll"/> is called (to un-pause), trigger misfire
 
-             instructions WILL be applied.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="M:Quartz.Core.QuartzScheduler.ResumeAll"/>
 
-             <seealso cref="M:Quartz.Core.QuartzScheduler.PauseJob(Quartz.JobKey)"/>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.ResumeAll">
 
-             <summary>
 
-             Resume (un-pause) all triggers - equivalent of calling <see cref="M:Quartz.Core.QuartzScheduler.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             on every group.
 
-             <para>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="M:Quartz.Core.QuartzScheduler.PauseAll"/>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetJobGroupNames">
 
-             <summary>
 
-             Get the names of all known <see cref="T:Quartz.IJob"/> groups.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetJobKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Get the names of all the <see cref="T:Quartz.IJob"/>s in the
 
-             given group.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetTriggersOfJob(Quartz.JobKey)">
 
-             <summary> 
 
-             Get all <see cref="T:Quartz.ITrigger"/> s that are associated with the
 
-             identified <see cref="T:Quartz.IJobDetail"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetTriggerGroupNames">
 
-             <summary>
 
-             Get the names of all known <see cref="T:Quartz.ITrigger"/>
 
-             groups.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetTriggerKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Get the names of all the <see cref="T:Quartz.ITrigger"/>s in
 
-             the matching groups.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetJobDetail(Quartz.JobKey)">
 
-             <summary> 
 
-             Get the <see cref="T:Quartz.IJobDetail"/> for the <see cref="T:Quartz.IJob"/>
 
-             instance with the given name and group.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Get the <see cref="T:Quartz.ITrigger"/> instance with the given name and
 
-             group.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.CheckExists(Quartz.JobKey)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.IJob"/> with the given identifier already
 
-             exists within the scheduler.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="jobKey">the identifier to check for</param>
 
-             <returns>true if a Job exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.CheckExists(Quartz.TriggerKey)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.ITrigger"/> with the given identifier already
 
-             exists within the scheduler.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="triggerKey">the identifier to check for</param>
 
-             <returns>true if a Trigger exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.Clear">
 
-             <summary>
 
-             Clears (deletes!) all scheduling data - all <see cref="T:Quartz.IJob"/>s, <see cref="T:Quartz.ITrigger"/>s
 
-             <see cref="T:Quartz.ICalendar"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetTriggerState(Quartz.TriggerKey)">
 
-             <summary>
 
-             Get the current state of the identified <see cref="T:Quartz.ITrigger"/>.  
 
-             </summary>
 
-             <seealso cref="T:Quartz.TriggerState"/>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.AddCalendar(System.String,Quartz.ICalendar,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Add (register) the given <see cref="T:Quartz.ICalendar"/> to the Scheduler.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.DeleteCalendar(System.String)">
 
-             <summary>
 
-             Delete the identified <see cref="T:Quartz.ICalendar"/> from the Scheduler.
 
-             </summary>
 
-             <returns> true if the Calendar was found and deleted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetCalendar(System.String)">
 
-             <summary> 
 
-             Get the <see cref="T:Quartz.ICalendar"/> instance with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetCalendarNames">
 
-             <summary>
 
-             Get the names of all registered <see cref="T:Quartz.ICalendar"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.AddInternalJobListener(Quartz.IJobListener)">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.IJobListener"/> to the
 
-             <see cref="T:Quartz.IScheduler"/>'s <i>internal</i> list.
 
-             </summary>
 
-             <param name="jobListener"></param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.RemoveInternalJobListener(System.String)">
 
-             <summary>
 
-             Remove the identified <see cref="T:Quartz.IJobListener"/> from the <see cref="T:Quartz.IScheduler"/>'s
 
-             list of <i>internal</i> listeners.
 
-             </summary>
 
-             <param name="name"></param>
 
-             <returns>true if the identified listener was found in the list, and removed.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetInternalJobListener(System.String)">
 
-             <summary>
 
-             Get the <i>internal</i> <see cref="T:Quartz.IJobListener"/>
 
-             that has the given name.
 
-             </summary>
 
-             <param name="name"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.AddInternalTriggerListener(Quartz.ITriggerListener)">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.ITriggerListener"/> to the
 
-             <see cref="T:Quartz.IScheduler"/>'s <i>internal</i> list.
 
-             </summary>
 
-             <param name="triggerListener"></param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.RemoveinternalTriggerListener(System.String)">
 
-             <summary>
 
-             Remove the identified <see cref="T:Quartz.ITriggerListener"/> from the <see cref="T:Quartz.IScheduler"/>'s
 
-             list of <i>internal</i> listeners.
 
-             </summary>
 
-             <param name="name"></param>
 
-             <returns>true if the identified listener was found in the list, and removed.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.GetInternalTriggerListener(System.String)">
 
-             <summary>
 
-             Get the <i>internal</i> <see cref="T:Quartz.ITriggerListener"/> that
 
-             has the given name.
 
-             </summary>
 
-             <param name="name"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifyJobStoreJobComplete(Quartz.Spi.IOperableTrigger,Quartz.IJobDetail,Quartz.SchedulerInstruction)">
 
-             <summary>
 
-             Notifies the job store job complete.
 
-             </summary>
 
-             <param name="trigger">The trigger.</param>
 
-             <param name="detail">The detail.</param>
 
-             <param name="instCode">The instruction code.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerThread(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Notifies the scheduler thread.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifyTriggerListenersFired(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Notifies the trigger listeners about fired trigger.
 
-             </summary>
 
-             <param name="jec">The job execution context.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifyTriggerListenersMisfired(Quartz.ITrigger)">
 
-             <summary>
 
-             Notifies the trigger listeners about misfired trigger.
 
-             </summary>
 
-             <param name="trigger">The trigger.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifyTriggerListenersComplete(Quartz.IJobExecutionContext,Quartz.SchedulerInstruction)">
 
-             <summary>
 
-             Notifies the trigger listeners of completion.
 
-             </summary>
 
-             <param name="jec">The job execution context.</param>
 
-             <param name="instCode">The instruction code to report to triggers.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifyJobListenersToBeExecuted(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Notifies the job listeners about job to be executed.
 
-             </summary>
 
-             <param name="jec">The jec.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifyJobListenersWasVetoed(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Notifies the job listeners that job execution was vetoed.
 
-             </summary>
 
-             <param name="jec">The job execution context.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifyJobListenersWasExecuted(Quartz.IJobExecutionContext,Quartz.JobExecutionException)">
 
-             <summary>
 
-             Notifies the job listeners that job was executed.
 
-             </summary>
 
-             <param name="jec">The jec.</param>
 
-             <param name="je">The je.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersError(System.String,Quartz.SchedulerException)">
 
-             <summary>
 
-             Notifies the scheduler listeners about scheduler error.
 
-             </summary>
 
-             <param name="msg">The MSG.</param>
 
-             <param name="se">The se.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersScheduled(Quartz.ITrigger)">
 
-             <summary>
 
-             Notifies the scheduler listeners about job that was scheduled.
 
-             </summary>
 
-             <param name="trigger">The trigger.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersUnscheduled(Quartz.TriggerKey)">
 
-             <summary>
 
-             Notifies the scheduler listeners about job that was unscheduled.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersFinalized(Quartz.ITrigger)">
 
-             <summary>
 
-             Notifies the scheduler listeners about finalized trigger.
 
-             </summary>
 
-             <param name="trigger">The trigger.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersPausedTriggers(System.String)">
 
-             <summary>
 
-             Notifies the scheduler listeners about paused trigger.
 
-             </summary>
 
-             <param name="group">The group.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersPausedTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Notifies the scheduler listeners about paused trigger.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersResumedTriggers(System.String)">
 
-             <summary>
 
-             Notifies the scheduler listeners resumed trigger.
 
-             </summary>
 
-             <param name="group">The group.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersResumedTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Notifies the scheduler listeners resumed trigger.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersPausedJob(Quartz.JobKey)">
 
-             <summary>
 
-             Notifies the scheduler listeners about paused job.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersPausedJobs(System.String)">
 
-             <summary>
 
-             Notifies the scheduler listeners about paused job.
 
-             </summary>
 
-             <param name="group">The group.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersResumedJob(Quartz.JobKey)">
 
-             <summary>
 
-             Notifies the scheduler listeners about resumed job.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersResumedJobs(System.String)">
 
-             <summary>
 
-             Notifies the scheduler listeners about resumed job.
 
-             </summary>
 
-             <param name="group">The group.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.NotifySchedulerListenersShutdown">
 
-             <summary>
 
-             Notifies the scheduler listeners about scheduler shutdown.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.Interrupt(Quartz.JobKey)">
 
-             <summary>
 
-             Interrupt all instances of the identified InterruptableJob.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.Interrupt(System.String)">
 
-             <summary>
 
-             Interrupt all instances of the identified InterruptableJob executing in this Scheduler instance.
 
-             </summary>
 
-             <remarks>
 
-             This method is not cluster aware.  That is, it will only interrupt 
 
-             instances of the identified InterruptableJob currently executing in this 
 
-             Scheduler instance, not across the entire cluster.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.Simpl.IRemotableQuartzScheduler.Interrupt(Quartz.JobKey)"/>
 
-             <param name="fireInstanceId"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzScheduler.InitializeLifetimeService">
 
-             <summary>
 
-             Obtains a lifetime service object to control the lifetime policy for this instance.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.Version">
 
-             <summary>
 
-             Gets the version of the Quartz Scheduler.
 
-             </summary>
 
-             <value>The version.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.VersionMajor">
 
-             <summary>
 
-             Gets the version major.
 
-             </summary>
 
-             <value>The version major.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.VersionMinor">
 
-             <summary>
 
-             Gets the version minor.
 
-             </summary>
 
-             <value>The version minor.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.VersionIteration">
 
-             <summary>
 
-             Gets the version iteration.
 
-             </summary>
 
-             <value>The version iteration.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.SchedulerSignaler">
 
-             <summary>
 
-             Gets the scheduler signaler.
 
-             </summary>
 
-             <value>The scheduler signaler.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.SchedulerName">
 
-             <summary>
 
-             Returns the name of the <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.SchedulerInstanceId">
 
-             <summary> 
 
-             Returns the instance Id of the <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.SchedulerContext">
 
-             <summary>
 
-             Returns the <see cref="P:Quartz.Core.QuartzScheduler.SchedulerContext"/> of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.SignalOnSchedulingChange">
 
-             <summary>
 
-             Gets or sets a value indicating whether to signal on scheduling change.
 
-             </summary>
 
-             <value>
 
-             	<c>true</c> if scheduler should signal on scheduling change; otherwise, <c>false</c>.
 
-             </value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.InStandbyMode">
 
-             <summary>
 
-             Reports whether the <see cref="T:Quartz.IScheduler"/> is paused.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.JobStoreClass">
 
-             <summary>
 
-             Gets the job store class.
 
-             </summary>
 
-             <value>The job store class.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.ThreadPoolClass">
 
-             <summary>
 
-             Gets the thread pool class.
 
-             </summary>
 
-             <value>The thread pool class.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.ThreadPoolSize">
 
-             <summary>
 
-             Gets the size of the thread pool.
 
-             </summary>
 
-             <value>The size of the thread pool.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.IsShutdown">
 
-             <summary>
 
-             Reports whether the <see cref="T:Quartz.IScheduler"/> has been Shutdown.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.CurrentlyExecutingJobs">
 
-             <summary>
 
-             Return a list of <see cref="T:Quartz.IJobExecutionContext"/> objects that
 
-             represent all currently executing Jobs in this Scheduler instance.
 
-             <para>
 
-             This method is not cluster aware.  That is, it will only return Jobs
 
-             currently executing in this Scheduler instance, not across the entire
 
-             cluster.
 
-             </para>
 
-             <para>
 
-             Note that the list returned is an 'instantaneous' snap-shot, and that as
 
-             soon as it's returned, the true list of executing jobs may be different.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.InternalSchedulerListeners">
 
-             <summary>
 
-             Get a List containing all of the <i>internal</i> <see cref="T:Quartz.ISchedulerListener"/>s
 
-             registered with the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.JobFactory">
 
-             <summary>
 
-             Gets or sets the job factory.
 
-             </summary>
 
-             <value>The job factory.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.RunningSince">
 
-             <summary>
 
-             Gets the running since.
 
-             </summary>
 
-             <value>The running since.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.NumJobsExecuted">
 
-             <summary>
 
-             Gets the number of jobs executed.
 
-             </summary>
 
-             <value>The number of jobs executed.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.SupportsPersistence">
 
-             <summary>
 
-             Gets a value indicating whether this scheduler supports persistence.
 
-             </summary>
 
-             <value><c>true</c> if supports persistence; otherwise, <c>false</c>.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.InternalJobListeners">
 
-             <summary>
 
-             Get a List containing all of the <see cref="T:Quartz.IJobListener"/>s
 
-             in the <see cref="T:Quartz.IScheduler"/>'s <i>internal</i> list.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzScheduler.InternalTriggerListeners">
 
-             <summary>
 
-             Get a list containing all of the <see cref="T:Quartz.ITriggerListener"/>s
 
-             in the <see cref="T:Quartz.IScheduler"/>'s <i>internal</i> list.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Core.QuartzScheduler.DelayedSchedulerStarter">
 
-             <summary>
 
-             Helper class to start scheduler in a delayed fashion.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Core.ErrorLogger">
 
-             <summary>
 
-             ErrorLogger - Scheduler Listener Class
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.IJobListener">
 
-             <summary>
 
-             The interface to be implemented by classes that want to be informed when a
 
-             <see cref="T:Quartz.IJobDetail"/> executes. In general,  applications that use a 
 
-             <see cref="T:Quartz.IScheduler"/> will not have use for this mechanism.
 
-             </summary>
 
-             <seealso cref="M:Quartz.IListenerManager.AddJobListener(Quartz.IJobListener,System.Collections.Generic.IList{Quartz.IMatcher{Quartz.JobKey}})"/>
 
-             <seealso cref="T:Quartz.IMatcher`1"/>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.IJobExecutionContext"/>
 
-             <seealso cref="T:Quartz.JobExecutionException"/>
 
-             <seealso cref="T:Quartz.ITriggerListener"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.IJobListener.JobToBeExecuted(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             is about to be executed (an associated <see cref="T:Quartz.ITrigger"/>
 
-             has occurred).
 
-             <para>
 
-             This method will not be invoked if the execution of the Job was vetoed
 
-             by a <see cref="T:Quartz.ITriggerListener"/>.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="M:Quartz.IJobListener.JobExecutionVetoed(Quartz.IJobExecutionContext)"/>
 
-         </member>
 
-         <member name="M:Quartz.IJobListener.JobExecutionVetoed(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             was about to be executed (an associated <see cref="T:Quartz.ITrigger"/>
 
-             has occurred), but a <see cref="T:Quartz.ITriggerListener"/> vetoed it's 
 
-             execution.
 
-             </summary>
 
-             <seealso cref="M:Quartz.IJobListener.JobToBeExecuted(Quartz.IJobExecutionContext)"/>
 
-         </member>
 
-         <member name="M:Quartz.IJobListener.JobWasExecuted(Quartz.IJobExecutionContext,Quartz.JobExecutionException)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> after a <see cref="T:Quartz.IJobDetail"/>
 
-             has been executed, and be for the associated <see cref="T:Quartz.Spi.IOperableTrigger"/>'s
 
-             <see cref="M:Quartz.Spi.IOperableTrigger.Triggered(Quartz.ICalendar)"/> method has been called.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobListener.Name">
 
-             <summary>
 
-             Get the name of the <see cref="T:Quartz.IJobListener"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Core.QuartzSchedulerResources">
 
-             <summary>
 
-             Contains all of the resources (<see cref="T:Quartz.Spi.IJobStore"/>,<see cref="T:Quartz.Spi.IThreadPool"/>,
 
-             etc.) necessary to create a <see cref="T:Quartz.Core.QuartzScheduler"/> instance.
 
-             </summary>
 
-             <seealso cref="T:Quartz.Core.QuartzScheduler"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzSchedulerResources.GetUniqueIdentifier(System.String,System.String)">
 
-             <summary>
 
-             Gets the unique identifier.
 
-             </summary>
 
-             <param name="schedName">Name of the scheduler.</param>
 
-             <param name="schedInstId">The scheduler instance id.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzSchedulerResources.GetUniqueIdentifier">
 
-             <summary>
 
-             Gets the unique identifier.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzSchedulerResources.AddSchedulerPlugin(Quartz.Spi.ISchedulerPlugin)">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.Spi.ISchedulerPlugin"/> for the 
 
-             <see cref="T:Quartz.Core.QuartzScheduler"/> to use. This method expects the plugin's
 
-             "initialize" method to be invoked externally (either before or after
 
-             this method is called).
 
-             </summary>
 
-             <param name="plugin"></param>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.Name">
 
-             <summary>
 
-             Get or set the name for the <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException">
 
-             if name is null or empty.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.InstanceId">
 
-             <summary>
 
-             Get or set the instance Id for the <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException"> 
 
-             if name is null or empty.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.ThreadName">
 
-             <summary>
 
-             Get or set the name for the <see cref="T:Quartz.Core.QuartzSchedulerThread"/>.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException"> 
 
-             if name is null or empty.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.ThreadPool">
 
-             <summary>
 
-             Get or set the <see cref="P:Quartz.Core.QuartzSchedulerResources.ThreadPool"/> for the <see cref="T:Quartz.Core.QuartzScheduler"/>
 
-             to use.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException"> 
 
-             if threadPool is null.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.JobStore">
 
-             <summary>
 
-             Get or set the <see cref="T:Quartz.Spi.IJobStore"/> for the <see cref="T:Quartz.Core.QuartzScheduler"/>
 
-             to use.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException"> 
 
-             if jobStore is null.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.JobRunShellFactory">
 
-             <summary> 
 
-             Get or set the <see cref="P:Quartz.Core.QuartzSchedulerResources.JobRunShellFactory"/> for the <see cref="T:Quartz.Core.QuartzScheduler"/>
 
-             to use.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException"> 
 
-             if jobRunShellFactory is null.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.SchedulerPlugins">
 
-             <summary>
 
-             Get the <see cref="T:System.Collections.Generic.IList`1"/> of all  <see cref="T:Quartz.Spi.ISchedulerPlugin"/>s for the 
 
-             <see cref="T:Quartz.Core.QuartzScheduler"/> to use.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.MakeSchedulerThreadDaemon">
 
-             <summary>
 
-             Gets or sets a value indicating whether to make scheduler thread daemon.
 
-             </summary>
 
-             <value>
 
-             	<c>true</c> if scheduler should be thread daemon; otherwise, <c>false</c>.
 
-             </value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.SchedulerExporter">
 
-             <summary>
 
-             Gets or sets the scheduler exporter.
 
-             </summary>
 
-             <value>The scheduler exporter.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.ThreadExecutor">
 
-             <summary>
 
-             The ThreadExecutor which runs the QuartzSchedulerThread.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerResources.BatchTimeWindow">
 
-             <summary>
 
-             Gets or sets the batch time window.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Core.QuartzSchedulerThread">
 
-             <summary>
 
-             The thread responsible for performing the work of firing <see cref="T:Quartz.ITrigger"/>
 
-             s that are registered with the <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-             <seealso cref="T:Quartz.Core.QuartzScheduler"/>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.QuartzThread">
 
-             <summary>
 
-             Support class used to handle threads
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.QuartzThread.thread">
 
-             <summary>
 
-             The instance of System.Threading.Thread
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.QuartzThread.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the QuartzThread class
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.QuartzThread.#ctor(System.String)">
 
-             <summary>
 
-             Initializes a new instance of the Thread class.
 
-             </summary>
 
-             <param name="name">The name of the thread</param>
 
-         </member>
 
-         <member name="M:Quartz.QuartzThread.Run">
 
-             <summary>
 
-             This method has no functionality unless the method is overridden
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.QuartzThread.Start">
 
-             <summary>
 
-             Causes the operating system to change the state of the current thread instance to ThreadState.Running
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.QuartzThread.Interrupt">
 
-             <summary>
 
-             Interrupts a thread that is in the WaitSleepJoin thread state
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.QuartzThread.Join">
 
-             <summary>
 
-             Blocks the calling thread until a thread terminates
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.QuartzThread.ToString">
 
-             <summary>
 
-             Obtain a string that represents the current object
 
-             </summary>
 
-             <returns>A string that represents the current object</returns>
 
-         </member>
 
-         <member name="P:Quartz.QuartzThread.Name">
 
-             <summary>
 
-             Gets or sets the name of the thread
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.QuartzThread.Priority">
 
-             <summary>
 
-             Gets or sets a value indicating the scheduling priority of a thread
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.QuartzThread.IsBackground">
 
-             <summary>
 
-             Gets or sets a value indicating whether or not a thread is a background thread.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzSchedulerThread.GetRandomizedIdleWaitTime">
 
-             <summary>
 
-             Gets the randomized idle wait time.
 
-             </summary>
 
-             <value>The randomized idle wait time.</value>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzSchedulerThread.#ctor(Quartz.Core.QuartzScheduler,Quartz.Core.QuartzSchedulerResources)">
 
-             <summary>
 
-             Construct a new <see cref="T:Quartz.Core.QuartzSchedulerThread"/> for the given
 
-             <see cref="T:Quartz.Core.QuartzScheduler"/> as a non-daemon <see cref="T:System.Threading.Thread"/>
 
-             with normal priority.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzSchedulerThread.#ctor(Quartz.Core.QuartzScheduler,Quartz.Core.QuartzSchedulerResources,System.Boolean,System.Int32)">
 
-             <summary>
 
-             Construct a new <see cref="T:Quartz.Core.QuartzSchedulerThread"/> for the given
 
-             <see cref="T:Quartz.Core.QuartzScheduler"/> as a <see cref="T:System.Threading.Thread"/> with the given
 
-             attributes.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzSchedulerThread.TogglePause(System.Boolean)">
 
-             <summary>
 
-             Signals the main processing loop to pause at the next possible point.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzSchedulerThread.Halt(System.Boolean)">
 
-             <summary>
 
-             Signals the main processing loop to pause at the next possible point.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzSchedulerThread.SignalSchedulingChange(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Signals the main processing loop that a change in scheduling has been
 
-             made - in order to interrupt any sleeping that may be occurring while
 
-             waiting for the fire time to arrive.
 
-             </summary>
 
-             <param name="candidateNewNextFireTimeUtc">
 
-             the time when the newly scheduled trigger
 
-             will fire.  If this method is being called do to some other even (rather
 
-             than scheduling a trigger), the caller should pass null.
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.Core.QuartzSchedulerThread.Run">
 
-             <summary>
 
-             The main processing loop of the <see cref="T:Quartz.Core.QuartzSchedulerThread"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerThread.Log">
 
-             <summary>
 
-             Gets the log.
 
-             </summary>
 
-             <value>The log.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerThread.IdleWaitTime">
 
-             <summary>
 
-             Sets the idle wait time.
 
-             </summary>
 
-             <value>The idle wait time.</value>
 
-         </member>
 
-         <member name="P:Quartz.Core.QuartzSchedulerThread.Paused">
 
-             <summary>
 
-             Gets a value indicating whether this <see cref="T:Quartz.Core.QuartzSchedulerThread"/> is paused.
 
-             </summary>
 
-             <value><c>true</c> if paused; otherwise, <c>false</c>.</value>
 
-         </member>
 
-         <member name="T:Quartz.Core.SchedulerSignalerImpl">
 
-             <summary> 
 
-             An interface to be used by <see cref="T:Quartz.Spi.IJobStore"/> instances in order to
 
-             communicate signals back to the <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Spi.ISchedulerSignaler">
 
-             <summary> 
 
-             An interface to be used by <see cref="T:Quartz.Spi.IJobStore"/> instances in order to
 
-             communicate signals back to the <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ISchedulerSignaler.NotifyTriggerListenersMisfired(Quartz.ITrigger)">
 
-             <summary>
 
-             Notifies the scheduler about misfired trigger.
 
-             </summary>
 
-             <param name="trigger">The trigger that misfired.</param>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ISchedulerSignaler.NotifySchedulerListenersFinalized(Quartz.ITrigger)">
 
-             <summary>
 
-             Notifies the scheduler about finalized trigger.
 
-             </summary>
 
-             <param name="trigger">The trigger that has finalized.</param>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ISchedulerSignaler.SignalSchedulingChange(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Signals the scheduling change.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ISchedulerSignaler.NotifySchedulerListenersError(System.String,Quartz.SchedulerException)">
 
-             <summary>
 
-             Informs scheduler listeners about an exception that has occurred.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Core.SchedulerSignalerImpl.NotifyTriggerListenersMisfired(Quartz.ITrigger)">
 
-             <summary>
 
-             Notifies the scheduler about misfired trigger.
 
-             </summary>
 
-             <param name="trigger">The trigger that misfired.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.SchedulerSignalerImpl.NotifySchedulerListenersFinalized(Quartz.ITrigger)">
 
-             <summary>
 
-             Notifies the scheduler about finalized trigger.
 
-             </summary>
 
-             <param name="trigger">The trigger that has finalized.</param>
 
-         </member>
 
-         <member name="M:Quartz.Core.SchedulerSignalerImpl.SignalSchedulingChange(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Signals the scheduling change.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.Common.ConfigurationBasedDbMetadataFactory">
 
-             <summary>
 
-             The DbMetadata factory based on application configuration
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.Common.DbMetadataFactory">
 
-             <summary>
 
-             Base class for the DbMetadata Factory implementations
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbMetadataFactory.GetProviderNames">
 
-             <summary>
 
-             Gets the supported provider names.
 
-             </summary>
 
-             <returns>The enumeration of the supported provider names</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbMetadataFactory.GetDbMetadata(System.String)">
 
-             <summary>
 
-             Gets the database metadata associated to the specified provider name.
 
-             </summary>
 
-             <param name="providerName">Name of the provider.</param>
 
-             <returns>The metadata instance for the requested provider</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.ConfigurationBasedDbMetadataFactory.#ctor(System.String,System.String)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.Common.EmbeddedAssemblyResourceDbMetadataFactory"/> class.
 
-             </summary>
 
-             <param name="sectionName">Name of the configuration section.</param>
 
-             <param name="providerNamePrefix">The provider name prefix.</param>
 
-             <exception cref="T:System.ArgumentNullException">The providerNamePrefix cannot be null or empty.</exception>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.ConfigurationBasedDbMetadataFactory.GetPropertiesParser">
 
-             <summary>
 
-             Gets the properties parser.
 
-             </summary>
 
-             <returns>The properties parser</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.ConfigurationBasedDbMetadataFactory.GetProviderNames">
 
-             <summary>
 
-             Gets the supported provider names.
 
-             </summary>
 
-             <returns>The enumeration of the supported provider names</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.ConfigurationBasedDbMetadataFactory.GetDbMetadata(System.String)">
 
-             <summary>
 
-             Gets the database metadata associated to the specified provider name.
 
-             </summary>
 
-             <param name="providerName">Name of the provider.</param>
 
-             <returns>The metadata instance for the specified name</returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.Common.DbMetadata">
 
-             <summary>
 
-             Metadata information about specific ADO.NET driver library. Metadata is used to
 
-             create correct types of object instances to interact with the underlying
 
-             database.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbMetadata.Init">
 
-             <summary>
 
-             Initializes this instance. Parses information and initializes startup
 
-             values.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbMetadata.GetParameterName(System.String)">
 
-             <summary>
 
-             Gets the name of the parameter which includes the parameter prefix for this
 
-             database.
 
-             </summary>
 
-             <param name="parameterName">Name of the parameter.</param>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.AssemblyName">
 
-             <summary>Gets or sets the name of the assembly that holds the connection library.</summary>
 
-             <value>The name of the assembly.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.ProductName">
 
-             <summary>
 
-             Gets or sets the name of the product.
 
-             </summary>
 
-             <value>The name of the product.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.ConnectionType">
 
-             <summary>
 
-             Gets or sets the type of the connection.
 
-             </summary>
 
-             <value>The type of the connection.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.CommandType">
 
-             <summary>
 
-             Gets or sets the type of the command.
 
-             </summary>
 
-             <value>The type of the command.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.ParameterType">
 
-             <summary>
 
-             Gets or sets the type of the parameter.
 
-             </summary>
 
-             <value>The type of the parameter.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.CommandBuilderType">
 
-             <summary>
 
-             Gets the type of the command builder.
 
-             </summary>
 
-             <value>The type of the command builder.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.CommandBuilderDeriveParametersMethod">
 
-             <summary>Gets the command builder's derive parameters method.</summary>
 
-             <value>The command builder derive parameters method.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.ParameterNamePrefix">
 
-             <summary>
 
-             Gets or sets the parameter name prefix.
 
-             </summary>
 
-             <value>The parameter name prefix.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.ExceptionType">
 
-             <summary>
 
-             Gets or sets the type of the exception that is thrown when using driver
 
-             library.
 
-             </summary>
 
-             <value>The type of the exception.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.BindByName">
 
-             <summary>
 
-             Gets or sets a value indicating whether parameters are bind by name when using
 
-             ADO.NET parameters.
 
-             </summary>
 
-             <value><c>true</c> if parameters are bind by name; otherwise, <c>false</c>.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.ParameterDbType">
 
-             <summary>Gets or sets the type of the database parameters.</summary>
 
-             <value>The type of the parameter db.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.ParameterDbTypeProperty">
 
-             <summary>
 
-             Gets the parameter db type property.
 
-             </summary>
 
-             <value>The parameter db type property.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.ParameterIsNullableProperty">
 
-             <summary>
 
-             Gets the parameter is nullable property.
 
-             </summary>
 
-             <value>The parameter is nullable property.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.DbBinaryTypeName">
 
-             <summary>
 
-             Gets or sets the type of the db binary column. This is a string representation of
 
-             Enum element because this information is database driver specific.
 
-             </summary>
 
-             <value>The type of the db binary.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.DbBinaryType">
 
-             <summary>Gets the type of the db binary.</summary>
 
-             <value>The type of the db binary.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.ParameterDbTypePropertyName">
 
-             <summary>
 
-             Sets the name of the parameter db type property.
 
-             </summary>
 
-             <value>The name of the parameter db type property.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbMetadata.UseParameterNamePrefixInParameterCollection">
 
-             <summary>
 
-             Gets or sets a value indicating whether [use parameter name prefix in parameter collection].
 
-             </summary>
 
-             <value>
 
-             	<c>true</c> if [use parameter name prefix in parameter collection]; otherwise, <c>false</c>.
 
-             </value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.Common.DbProvider">
 
-             <summary>
 
-             Concrete implementation of <see cref="T:Quartz.Impl.AdoJobStore.Common.IDbProvider"/>.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.Common.IDbProvider">
 
-             <summary>
 
-             Data access provider interface.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.IDbProvider.Initialize">
 
-             <summary>
 
-             Initializes the db provider implementation.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.IDbProvider.CreateCommand">
 
-             <summary>
 
-             Returns a new command object for executing SQL statements/Stored Procedures
 
-             against the database.
 
-             </summary>
 
-             <returns>An new <see cref="T:System.Data.IDbCommand"/></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.IDbProvider.CreateCommandBuilder">
 
-             <summary>
 
-             Returns a new instance of the providers CommandBuilder class.
 
-             </summary>
 
-             <remarks>In .NET 1.1 there was no common base class or interface
 
-             for command builders, hence the return signature is object to
 
-             be portable (but more loosely typed) across .NET 1.1/2.0</remarks>
 
-             <returns>A new Command Builder</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.IDbProvider.CreateConnection">
 
-             <summary>
 
-             Returns a new connection object to communicate with the database.
 
-             </summary>
 
-             <returns>A new <see cref="T:System.Data.IDbConnection"/></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.IDbProvider.CreateParameter">
 
-             <summary>
 
-             Returns a new parameter object for binding values to parameter
 
-             placeholders in SQL statements or Stored Procedure variables.
 
-             </summary> 
 
-             <returns>A new <see cref="T:System.Data.IDbDataParameter"/></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.IDbProvider.Shutdown">
 
-             <summary>
 
-             Shutdowns this instance.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.IDbProvider.ConnectionString">
 
-             <summary>
 
-             Connection string used to create connections.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbProvider.#cctor">
 
-             <summary>
 
-             Parse metadata once in static constructor.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbProvider.#ctor(System.String,System.String)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.Common.DbProvider"/> class.
 
-             </summary>
 
-             <param name="dbProviderName">Name of the db provider.</param>
 
-             <param name="connectionString">The connection string.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbProvider.RegisterDbMetadata(System.String,Quartz.Impl.AdoJobStore.Common.DbMetadata)">
 
-             <summary>
 
-              Registers DB metadata information for given provider name.
 
-             </summary>
 
-             <param name="dbProviderName"></param>
 
-             <param name="metadata"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbProvider.GenerateValidProviderNamesInfo">
 
-             <summary>
 
-             Generates the valid provider names information.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbProvider.CreateCommand">
 
-             <summary>
 
-             Returns a new command object for executing SQL statements/Stored Procedures
 
-             against the database.
 
-             </summary>
 
-             <returns>An new <see cref="T:System.Data.IDbCommand"/></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbProvider.CreateCommandBuilder">
 
-             <summary>
 
-             Returns a new instance of the providers CommandBuilder class.
 
-             </summary>
 
-             <returns>A new Command Builder</returns>
 
-             <remarks>In .NET 1.1 there was no common base class or interface
 
-             for command builders, hence the return signature is object to
 
-             be portable (but more loosely typed) across .NET 1.1/2.0</remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbProvider.CreateConnection">
 
-             <summary>
 
-             Returns a new connection object to communicate with the database.
 
-             </summary>
 
-             <returns>A new <see cref="T:System.Data.IDbConnection"/></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbProvider.CreateParameter">
 
-             <summary>
 
-             Returns a new parameter object for binding values to parameter
 
-             placeholders in SQL statements or Stored Procedure variables.
 
-             </summary>
 
-             <returns>A new <see cref="T:System.Data.IDbDataParameter"/></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.DbProvider.Shutdown">
 
-             <summary>
 
-             Shutdowns this instance.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbProvider.ConnectionString">
 
-             <summary>
 
-             Connection string used to create connections.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.Common.DbProvider.Metadata">
 
-             <summary>
 
-             Gets the metadata.
 
-             </summary>
 
-             <value>The metadata.</value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.Common.EmbeddedAssemblyResourceDbMetadataFactory">
 
-             <summary>
 
-             The DbMetadata factory based on embedded assembly resource
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.EmbeddedAssemblyResourceDbMetadataFactory.#ctor(System.String,System.String)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.Common.EmbeddedAssemblyResourceDbMetadataFactory"/> class.
 
-             </summary>
 
-             <param name="resourceName">Name of the resource.</param>
 
-             <param name="propertyGroupName">Name of the property group (The prefix of the provider name).</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.EmbeddedAssemblyResourceDbMetadataFactory.GetProviderNames">
 
-             <summary>
 
-             Gets the supported provider names.
 
-             </summary>
 
-             <returns>The enumeration of the supported provider names</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.Common.EmbeddedAssemblyResourceDbMetadataFactory.GetDbMetadata(System.String)">
 
-             <summary>
 
-             Gets the database metadata associated to the specified provider name.
 
-             </summary>
 
-             <param name="providerName">Name of the provider.</param>
 
-             <returns>The metadata instance for the specified name</returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.AdoConstants">
 
-             <summary>
 
-             This interface can be implemented by any <see cref="T:Quartz.Impl.AdoJobStore.IDriverDelegate"/>
 
-             class that needs to use the constants contained herein.
 
-             </summary>
 
-             <author><a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-             <author>James House</author>
 
-             <author>Marko Lahma(.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.Impl.AdoJobStore.AdoConstants.TriggerTypeSimple">
 
-             <summary>
 
-             Simple Trigger type.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Impl.AdoJobStore.AdoConstants.TriggerTypeCron">
 
-             <summary>
 
-             Cron Trigger type.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Impl.AdoJobStore.AdoConstants.TriggerTypeCalendarInterval">
 
-             <summary>
 
-             Calendar Interval Trigger type.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Impl.AdoJobStore.AdoConstants.TriggerTypeDailyTimeInterval">
 
-             <summary>
 
-             Daily Time Interval Trigger type.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Impl.AdoJobStore.AdoConstants.TriggerTypeBlob">
 
-             <summary>
 
-             A general blob Trigger type.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.AdoJobStoreUtil">
 
-             <summary> 
 
-             This class contains utility functions for use in all delegate classes.
 
-             </summary>
 
-             <author><a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.AdoJobStoreUtil.ReplaceTablePrefix(System.String,System.String,System.String)">
 
-             <summary>
 
-             Replace the table prefix in a query by replacing any occurrences of
 
-             "{0}" with the table prefix.
 
-             </summary>
 
-             <param name="query">The unsubstituted query</param>
 
-             <param name="tablePrefix">The table prefix</param>
 
-             <param name="schedNameLiteral">the scheduler name</param>
 
-             <returns>The query, with proper table prefix substituted</returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.AdoUtil">
 
-             <summary>
 
-             Common helper methods for working with ADO.NET.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.CalendarIntervalTriggerPersistenceDelegate">
 
-             <summary>
 
-             Persist a CalendarIntervalTriggerImpl by converting internal fields to and from
 
-             SimplePropertiesTriggerProperties.
 
-             </summary>
 
-             <see cref="T:Quartz.CalendarIntervalScheduleBuilder"/>
 
-             <see cref="T:Quartz.ICalendarIntervalTrigger"/>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.SimplePropertiesTriggerPersistenceDelegateSupport">
 
-             <summary>
 
-             A base implementation of <see cref="T:Quartz.Impl.AdoJobStore.ITriggerPersistenceDelegate"/> that persists
 
-             trigger fields in the "QRTZ_SIMPROP_TRIGGERS" table.  This allows extending
 
-             concrete classes to simply implement a couple methods that do the work of
 
-             getting/setting the trigger's fields, and creating the <see cref="T:Quartz.IScheduleBuilder"/>
 
-             for the particular type of trigger.
 
-             </summary>
 
-             <seealso cref="T:Quartz.Impl.AdoJobStore.CalendarIntervalTriggerPersistenceDelegate"/>
 
-             <author>jhouse</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.ITriggerPersistenceDelegate">
 
-             <summary>
 
-             An interface which provides an implementation for storing a particular
 
-             type of <see cref="T:Quartz.ITrigger"/>'s extended properties.
 
-             </summary>
 
-             <author>jhouse</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.ITriggerPersistenceDelegate.Initialize(System.String,System.String,Quartz.Impl.AdoJobStore.IDbAccessor)">
 
-             <summary>
 
-             Initializes the persistence delegate.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.ITriggerPersistenceDelegate.CanHandleTriggerType(Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Returns whether the trigger type can be handled by delegate.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.ITriggerPersistenceDelegate.GetHandledTriggerTypeDiscriminator">
 
-             <summary>
 
-             Returns database discriminator value for trigger type.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.ITriggerPersistenceDelegate.InsertExtendedTriggerProperties(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger,System.String,Quartz.IJobDetail)">
 
-             <summary>
 
-             Inserts trigger's special properties.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.ITriggerPersistenceDelegate.UpdateExtendedTriggerProperties(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger,System.String,Quartz.IJobDetail)">
 
-             <summary>
 
-             Updates trigger's special properties.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.ITriggerPersistenceDelegate.DeleteExtendedTriggerProperties(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Deletes trigger's special properties.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.ITriggerPersistenceDelegate.LoadExtendedTriggerProperties(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Loads trigger's special properties.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.SimplePropertiesTriggerPersistenceDelegateSupport.CanHandleTriggerType(Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Returns whether the trigger type can be handled by delegate.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.SimplePropertiesTriggerPersistenceDelegateSupport.GetHandledTriggerTypeDiscriminator">
 
-             <summary>
 
-             Returns database discriminator value for trigger type.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder">
 
-             <summary>
 
-             Utility class to keep track of both active transaction
 
-             and connection.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder.#ctor(System.Data.IDbConnection,System.Data.IDbTransaction)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder"/> class.
 
-             </summary>
 
-             <param name="connection">The connection.</param>
 
-             <param name="transaction">The transaction.</param>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder.Connection">
 
-             <summary>
 
-             Gets or sets the connection.
 
-             </summary>
 
-             <value>The connection.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder.Transaction">
 
-             <summary>
 
-             Gets or sets the transaction.
 
-             </summary>
 
-             <value>The transaction.</value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.CronTriggerPersistenceDelegate">
 
-             <summary>
 
-             Persist a CronTriggerImpl.
 
-             </summary>
 
-             <see cref="T:Quartz.CronScheduleBuilder"/>
 
-             <see cref="T:Quartz.ICronTrigger"/>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.DailyTimeIntervalTriggerPersistenceDelegate">
 
-             <summary>
 
-             Persist a DailyTimeIntervalTrigger by converting internal fields to and from
 
-             SimplePropertiesTriggerProperties.
 
-             </summary>
 
-             <see cref="T:Quartz.DailyTimeIntervalScheduleBuilder"/>
 
-             <see cref="T:Quartz.IDailyTimeIntervalTrigger"/>
 
-             <author>Zemian Deng saltnlight5@gmail.com</author>
 
-             <author>Nuno Maia (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.DailyTimeIntervalTriggerPersistenceDelegate.GetHandledTriggerTypeDiscriminator">
 
-             <summary>
 
-             
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.DBSemaphore">
 
-             <summary>
 
-             Base class for database based lock handlers for providing thread/resource locking 
 
-             in order to protect resources from being altered by multiple threads at the 
 
-             same time.
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.StdAdoConstants">
 
-             <summary>
 
-             This class extends <see cref="T:Quartz.Impl.AdoJobStore.AdoConstants"/>
 
-             to include the query string constants in use by the <see cref="T:Quartz.Impl.AdoJobStore.StdAdoDelegate"/>
 
-             class.
 
-             </summary>
 
-             <author><a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.ISemaphore">
 
-             <summary> 
 
-             An interface for providing thread/resource locking in order to protect
 
-             resources from being altered by multiple threads at the same time.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.ISemaphore.ObtainLock(Quartz.Impl.AdoJobStore.Common.DbMetadata,Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary> 
 
-             Grants a lock on the identified resource to the calling thread (blocking
 
-             until it is available).
 
-             </summary>
 
-             <returns> true if the lock was obtained.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.ISemaphore.ReleaseLock(System.String)">
 
-             <summary> Release the lock on the identified resource if it is held by the calling
 
-             thread.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.ISemaphore.RequiresConnection">
 
-             <summary>
 
-             Whether this Semaphore implementation requires a database connection for
 
-             its lock management operations.
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.ISemaphore.ObtainLock(Quartz.Impl.AdoJobStore.Common.DbMetadata,Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.ISemaphore.ReleaseLock(System.String)"/>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.ITablePrefixAware">
 
-             <summary>
 
-             Interface for Quartz objects that need to know what the table prefix of
 
-             the tables used by a ADO.NET JobStore is.
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.ITablePrefixAware.TablePrefix">
 
-             <summary>
 
-             Table prefix to use.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.DBSemaphore.#ctor(System.String,System.String,System.String,System.String,Quartz.Impl.AdoJobStore.Common.IDbProvider)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.DBSemaphore"/> class.
 
-             </summary>
 
-             <param name="tablePrefix">The table prefix.</param>
 
-             <param name="schedName">the scheduler name</param>
 
-             <param name="defaultInsertSQL">The SQL.</param>
 
-             <param name="defaultSQL">The default SQL.</param>
 
-             <param name="dbProvider">The db provider.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.DBSemaphore.ExecuteSQL(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String,System.String)">
 
-             <summary>
 
-             Execute the SQL that will lock the proper database row.
 
-             </summary>
 
-             <param name="conn"></param>
 
-             <param name="lockName"></param>
 
-             <param name="expandedSQL"></param>
 
-             <param name="expandedInsertSQL"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.DBSemaphore.ObtainLock(Quartz.Impl.AdoJobStore.Common.DbMetadata,Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Grants a lock on the identified resource to the calling thread (blocking
 
-             until it is available).
 
-             </summary>
 
-             <param name="metadata"></param>
 
-             <param name="conn"></param>
 
-             <param name="lockName"></param>
 
-             <returns>true if the lock was obtained.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.DBSemaphore.ReleaseLock(System.String)">
 
-             <summary>
 
-             Release the lock on the identified resource if it is held by the calling
 
-             thread.
 
-             </summary>
 
-             <param name="lockName"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.DBSemaphore.IsLockOwner(System.String)">
 
-             <summary>
 
-             Determine whether the calling thread owns a lock on the identified
 
-             resource.
 
-             </summary>
 
-             <param name="lockName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DBSemaphore.LockOwners">
 
-             <summary>
 
-             Gets or sets the lock owners.
 
-             </summary>
 
-             <value>The lock owners.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DBSemaphore.Log">
 
-             <summary>
 
-             Gets the log.
 
-             </summary>
 
-             <value>The log.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DBSemaphore.RequiresConnection">
 
-             <summary>
 
-             This Semaphore implementation does use the database.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DBSemaphore.TablePrefix">
 
-             <summary>
 
-             Gets or sets the table prefix.
 
-             </summary>
 
-             <value>The table prefix.</value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.DelegateInitializationArgs">
 
-             <summary>
 
-             Initialization arguments holder for <see cref="T:Quartz.Impl.AdoJobStore.IDriverDelegate"/> implementations.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DelegateInitializationArgs.UseProperties">
 
-             <summary>
 
-             Whether simple <see cref="T:System.Collections.Specialized.NameValueCollection"/> should be used (for serialization safety).
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DelegateInitializationArgs.Logger">
 
-             <summary>
 
-             The logger to use during execution.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DelegateInitializationArgs.TablePrefix">
 
-             <summary>
 
-             The prefix of all table names.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DelegateInitializationArgs.InstanceName">
 
-             <summary>
 
-             The instance's name.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DelegateInitializationArgs.InstanceId">
 
-             <summary>
 
-             The instance id.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DelegateInitializationArgs.DbProvider">
 
-             <summary>
 
-             The db provider.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DelegateInitializationArgs.TypeLoadHelper">
 
-             <summary>
 
-             The type loading strategy.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DelegateInitializationArgs.ObjectSerializer">
 
-             <summary>
 
-             Object serializer and deserializer strategy to use.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.DelegateInitializationArgs.InitString">
 
-             <summary>
 
-             Custom driver delegate initialization.
 
-             </summary>
 
-             <remarks>
 
-             initStrings are of the format:
 
-             settingName=settingValue|otherSettingName=otherSettingValue|...
 
-             </remarks>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.FirebirdDelegate">
 
-             <summary>
 
-             Delegate implementation for Firebird.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.StdAdoDelegate">
 
-             <summary>
 
-             This is meant to be an abstract base class for most, if not all, <see cref="T:Quartz.Impl.AdoJobStore.IDriverDelegate"/>
 
-             implementations. Subclasses should override only those methods that need
 
-             special handling for the DBMS driver in question.
 
-             </summary>
 
-             <author><a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.IDriverDelegate">
 
-             <summary>
 
-             This is the base interface for all driver delegate classes.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             This interface is very similar to the <see cref="T:Quartz.Spi.IJobStore"/>
 
-             interface except each method has an additional <see cref="T:Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder"/>
 
-             parameter.
 
-             </para>
 
-             <para>
 
-             Unless a database driver has some <strong>extremely-DB-specific</strong>
 
-             requirements, any IDriverDelegate implementation classes should extend the
 
-             <see cref="T:Quartz.Impl.AdoJobStore.StdAdoDelegate"/> class.
 
-             </para>
 
-             </remarks>
 
-             <author><a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.Initialize(Quartz.Impl.AdoJobStore.DelegateInitializationArgs)">
 
-             <summary>
 
-             Initializes the driver delegate with configuration data.
 
-             </summary>
 
-             <param name="args"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateTriggerStatesFromOtherStates(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String,System.String)">
 
-             <summary>
 
-             Update all triggers having one of the two given states, to the given new
 
-             state.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="newState">The new state for the triggers</param>
 
-             <param name="oldState1">The first old state to update</param>
 
-             <param name="oldState2">The second old state to update</param>
 
-             <returns>Number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectMisfiredTriggers(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.DateTimeOffset)">
 
-             <summary>
 
-             Get the names of all of the triggers that have misfired - according to
 
-             the given timestamp.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="timestamp">The timestamp.</param>
 
-             <returns>An array of <see cref="T:Quartz.TriggerKey"/> objects</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.HasMisfiredTriggersInState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Get the names of all of the triggers in the given state that have
 
-             misfired - according to the given timestamp.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="state">The state.</param>
 
-             <param name="ts">The time stamp.</param>
 
-             <returns>An array of <see cref="T:Quartz.TriggerKey"/> objects</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectMisfiredTriggersInGroupInState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Get the names of all of the triggers in the given group and state that
 
-             have misfired - according to the given timestamp.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <param name="state">The state.</param>
 
-             <param name="ts">The timestamp.</param>
 
-             <returns>An array of <see cref="T:Quartz.TriggerKey"/> objects</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggersForRecoveringJobs(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary> 
 
-             Select all of the triggers for jobs that are requesting recovery. The
 
-             returned trigger objects will have unique "recoverXXX" trigger names and
 
-             will be in the <see cref="F:Quartz.SchedulerConstants.DefaultRecoveryGroup"/> trigger group.
 
-             </summary>
 
-             <remarks>
 
-             In order to preserve the ordering of the triggers, the fire time will be
 
-             set from the <i>ColumnFiredTime</i> column in the <i>TableFiredTriggers</i>
 
-             table. The caller is responsible for calling <see cref="M:Quartz.Spi.IOperableTrigger.ComputeFirstFireTimeUtc(Quartz.ICalendar)"/>
 
-             on each returned trigger. It is also up to the caller to insert the
 
-             returned triggers to ensure that they are fired.
 
-             </remarks>
 
-             <param name="conn">The DB Connection</param>
 
-             <returns>An array of <see cref="T:Quartz.ITrigger"/> objects</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.DeleteFiredTriggers(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Delete all fired triggers.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <returns>The number of rows deleted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.DeleteFiredTriggers(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Delete all fired triggers of the given instance.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="instanceId">The instance id.</param>
 
-             <returns>The number of rows deleted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.InsertJobDetail(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.IJobDetail)">
 
-             <summary>
 
-             Insert the job detail record.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="job">The job to insert.</param>
 
-             <returns>Number of rows inserted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateJobDetail(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.IJobDetail)">
 
-             <summary>
 
-             Update the job detail record.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="job">The job to update.</param>
 
-             <returns>Number of rows updated.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggerNamesForJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary> <para>
 
-             Get the names of all of the triggers associated with the given job.
 
-             </para>
 
-             
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.DeleteJobDetail(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Delete the job detail record for the given job.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns>the number of rows deleted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.IsJobStateful(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Check whether or not the given job is stateful.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns> true if the job exists and is stateful, false otherwise</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.JobExists(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Check whether or not the given job exists.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns>true if the job exists, false otherwise</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateJobData(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.IJobDetail)">
 
-             <summary>
 
-             Update the job data map for the given job.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="job">The job.</param>
 
-             <returns>the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectJobDetail(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey,Quartz.Spi.ITypeLoadHelper)">
 
-             <summary>
 
-             Select the JobDetail object for a given job name / group name.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <param name="classLoadHelper">The class load helper.</param>
 
-             <returns>The populated JobDetail object</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectNumJobs(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select the total number of jobs stored.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <returns> the total number of jobs stored</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectJobGroups(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary> 
 
-             Select all of the job group names that are stored.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <returns> an array of <see cref="T:System.String"/> group names</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectJobsInGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Select all of the jobs contained in a given group.
 
-             </summary>
 
-             <param name="conn">The DB Connection </param>
 
-             <param name="matcher"></param>
 
-             <returns> an array of <see cref="T:System.String"/> job names</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.InsertTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger,System.String,Quartz.IJobDetail)">
 
-             <summary>
 
-             Insert the base trigger data.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="trigger">The trigger to insert.</param>
 
-             <param name="state">The state that the trigger should be stored in.</param>
 
-             <param name="jobDetail">The job detail.</param>
 
-             <returns>The number of rows inserted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.InsertBlobTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Insert the blob trigger data.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="trigger">The trigger to insert</param>
 
-             <returns>The number of rows inserted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger,System.String,Quartz.IJobDetail)">
 
-             <summary>
 
-             Update the base trigger data.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="trigger">The trigger.</param>
 
-             <param name="state">The state.</param>
 
-             <param name="jobDetail">The job detail.</param>
 
-             <returns>the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateBlobTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Update the blob trigger data.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="trigger">The trigger.</param>
 
-             <returns>the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.TriggerExists(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Check whether or not a trigger exists.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <returns>the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateTriggerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,System.String)">
 
-             <summary>
 
-             Update the state for a given trigger.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <param name="state">The new state for the trigger.</param>
 
-             <returns> the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateTriggerStateFromOtherState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,System.String,System.String)">
 
-             <summary>
 
-             Update the given trigger to the given new state, if it is in the given
 
-             old state.
 
-             </summary>
 
-             <param name="conn">The DB connection</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <param name="newState">The new state for the trigger </param>
 
-             <param name="oldState">The old state the trigger must be in</param>
 
-             <returns> int the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateTriggerStateFromOtherStates(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,System.String,System.String,System.String,System.String)">
 
-             <summary>
 
-             Update the given trigger to the given new state, if it is one of the
 
-             given old states.
 
-             </summary>
 
-             <param name="conn">The DB connection</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <param name="newState">The new state for the trigger</param>
 
-             <param name="oldState1">One of the old state the trigger must be in</param>
 
-             <param name="oldState2">One of the old state the trigger must be in</param>
 
-             <param name="oldState3">One of the old state the trigger must be in
 
-             </param>
 
-             <returns> int the number of rows updated
 
-             </returns>
 
-             <throws>  SQLException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateTriggerGroupStateFromOtherStates(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey},System.String,System.String,System.String,System.String)">
 
-             <summary>
 
-             Update all triggers in the given group to the given new state, if they
 
-             are in one of the given old states.
 
-             </summary>
 
-             <param name="conn">The DB connection</param>
 
-             <param name="matcher"></param>
 
-             <param name="newState">The new state for the trigger</param>
 
-             <param name="oldState1">One of the old state the trigger must be in</param>
 
-             <param name="oldState2">One of the old state the trigger must be in</param>
 
-             <param name="oldState3">One of the old state the trigger must be in</param>
 
-             <returns>The number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateTriggerGroupStateFromOtherState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey},System.String,System.String)">
 
-             <summary>
 
-             Update all of the triggers of the given group to the given new state, if
 
-             they are in the given old state.
 
-             </summary>
 
-             <param name="conn">The DB connection</param>
 
-             <param name="matcher"></param>
 
-             <param name="newState">The new state for the trigger group</param>
 
-             <param name="oldState">The old state the triggers must be in.</param>
 
-             <returns> int the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateTriggerStatesForJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey,System.String)">
 
-             <summary>
 
-             Update the states of all triggers associated with the given job.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <param name="state">The new state for the triggers.</param>
 
-             <returns>The number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateTriggerStatesForJobFromOtherState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey,System.String,System.String)">
 
-             <summary>
 
-             Update the states of any triggers associated with the given job, that
 
-             are the given current state.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <param name="state">The new state for the triggers</param>
 
-             <param name="oldState">The old state of the triggers</param>
 
-             <returns> the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.DeleteBlobTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Delete the BLOB trigger data for a trigger.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <returns>The number of rows deleted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.DeleteTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Delete the base trigger data for a trigger.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <returns> the number of rows deleted </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectNumTriggersForJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Select the number of triggers associated with a given job.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns> the number of triggers for the given job </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectJobForTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,Quartz.Spi.ITypeLoadHelper)">
 
-             <summary>
 
-             Select the job to which the trigger is associated.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectJobForTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,Quartz.Spi.ITypeLoadHelper,System.Boolean)">
 
-             <summary>
 
-             Select the job to which the trigger is associated. Allow option to load actual job class or not. When case of
 
-             remove, we do not need to load the type, which in many cases, it's no longer exists.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggersForJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Select the triggers for a job>
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns> an array of <see cref="T:Quartz.ITrigger"/> objects associated with a given job. </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggersForCalendar(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Select the triggers for a calendar
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="calName">Name of the calendar.</param>
 
-             <returns>
 
-             An array of <see cref="T:Quartz.ITrigger"/> objects associated with a given job.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Select a trigger.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <returns>The <see cref="T:Quartz.ITrigger"/> object.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggerJobDataMap(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Select a trigger's JobDataMap.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <returns>The <see cref="T:Quartz.JobDataMap"/> of the Trigger, never null, but possibly empty.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Select a trigger's state value.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <returns>The <see cref="T:Quartz.ITrigger"/> object.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggerStatus(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary> 
 
-             Select a triggers status (state and next fire time).
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <returns>A <see cref="T:Quartz.Impl.AdoJobStore.TriggerStatus"/> object, or null</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectNumTriggers(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select the total number of triggers stored.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <returns>The total number of triggers stored.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggerGroups(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select all of the trigger group names that are stored.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <returns>An array of <see cref="T:System.String"/> group names.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggersInGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Select all of the triggers contained in a given group. 
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="matcher"></param>
 
-             <returns>An array of <see cref="T:System.String"/> trigger names.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggersInState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Select all of the triggers in a given state.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="state">The state the triggers must be in.</param>
 
-             <returns>An array of trigger <see cref="T:Quartz.TriggerKey"/>s.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.InsertPausedTriggerGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Inserts the paused trigger group.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.DeletePausedTriggerGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Deletes the paused trigger group.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.DeleteAllPausedTriggerGroups(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Deletes all paused trigger groups.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.IsTriggerGroupPaused(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Determines whether the specified trigger group is paused.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns>
 
-             	<c>true</c> if trigger group is paused; otherwise, <c>false</c>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectPausedTriggerGroups(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Selects the paused trigger groups.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.IsExistingTriggerGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Determines whether given trigger group already exists.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns>
 
-             	<c>true</c> if trigger group exists; otherwise, <c>false</c>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.InsertCalendar(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,Quartz.ICalendar)">
 
-             <summary>
 
-             Insert a new calendar.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="calendarName">The name for the new calendar.</param>
 
-             <param name="calendar">The calendar.</param>
 
-             <returns>The number of rows inserted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateCalendar(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,Quartz.ICalendar)">
 
-             <summary> 
 
-             Update a calendar.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="calendarName">The name for the new calendar.</param>
 
-             <param name="calendar">The calendar.</param>
 
-             <returns>The number of rows updated.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.CalendarExists(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Check whether or not a calendar exists.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="calendarName">The name of the calendar.</param>
 
-             <returns>true if the trigger exists, false otherwise.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectCalendar(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Select a calendar.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="calendarName">The name of the calendar.</param>
 
-             <returns>The Calendar.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.CalendarIsReferenced(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Check whether or not a calendar is referenced by any triggers.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="calendarName">The name of the calendar.</param>
 
-             <returns>true if any triggers reference the calendar, false otherwise</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.DeleteCalendar(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Delete a calendar.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="calendarName">The name of the trigger.</param>
 
-             <returns>The number of rows deleted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectNumCalendars(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary> 
 
-             Select the total number of calendars stored.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <returns>The total number of calendars stored.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectCalendars(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select all of the stored calendars.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <returns>An array of <see cref="T:System.String"/> calendar names.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggerForFireTime(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.DateTimeOffset)">
 
-             <summary>
 
-             Select the trigger that will be fired at the given fire time.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="fireTime">The time that the trigger will be fired.</param>
 
-             <returns> 
 
-             A <see cref="T:Quartz.TriggerKey"/> representing the
 
-             trigger that will be fired at the given fire time, or null if no
 
-             trigger will be fired at that time
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.InsertFiredTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger,System.String,Quartz.IJobDetail)">
 
-             <summary>
 
-             Insert a fired trigger.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="trigger">The trigger.</param>
 
-             <param name="state">The state that the trigger should be stored in.</param>
 
-             <param name="jobDetail">The job detail.</param>
 
-             <returns>The number of rows inserted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectFiredTriggerRecords(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String)">
 
-             <summary>
 
-             Select the states of all fired-trigger records for a given trigger, or
 
-             trigger group if trigger name is <see langword="null" />.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="triggerName">Name of the trigger.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns>A list of FiredTriggerRecord objects.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectFiredTriggerRecordsByJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String)">
 
-             <summary>
 
-             Select the states of all fired-trigger records for a given job, or job
 
-             group if job name is <see langword="null" />.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobName">Name of the job.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns>A List of FiredTriggerRecord objects.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectInstancesFiredTriggerRecords(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Select the states of all fired-trigger records for a given scheduler
 
-             instance.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="instanceName">Name of the instance.</param>
 
-             <returns>A list of FiredTriggerRecord objects.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.DeleteFiredTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Delete a fired trigger.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="entryId">The fired trigger entry to delete.</param>
 
-             <returns>The number of rows deleted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectJobExecutionCount(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Get the number instances of the identified job currently executing.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns>
 
-             The number instances of the identified job currently executing.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.InsertSchedulerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.DateTimeOffset,System.TimeSpan)">
 
-             <summary>
 
-             Insert a scheduler-instance state record.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="instanceId">The instance id.</param>
 
-             <param name="checkInTime">The check in time.</param>
 
-             <param name="interval">The interval.</param>
 
-             <returns>The number of inserted rows.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.DeleteSchedulerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Delete a scheduler-instance state record.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="instanceId">The instance id.</param>
 
-             <returns>The number of deleted rows.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.UpdateSchedulerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Update a scheduler-instance state record.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="instanceId">The instance id.</param>
 
-             <param name="checkInTime">The check in time.</param>
 
-             <returns>The number of updated rows.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectSchedulerStateRecords(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             A List of all current <see cref="T:Quartz.Impl.AdoJobStore.SchedulerStateRecord"/>s.
 
-             <para>
 
-             If instanceId is not null, then only the record for the identified
 
-             instance will be returned.
 
-             </para>
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="instanceName">The instance id.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectTriggerToAcquire(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.DateTimeOffset,System.DateTimeOffset,System.Int32)">
 
-             <summary>
 
-             Select the next trigger which will fire to fire between the two given timestamps 
 
-             in ascending order of fire time, and then descending by priority.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="noLaterThan">highest value of <see cref="M:Quartz.ITrigger.GetNextFireTimeUtc"/> of the triggers (exclusive)</param>
 
-             <param name="noEarlierThan">highest value of <see cref="M:Quartz.ITrigger.GetNextFireTimeUtc"/> of the triggers (inclusive)</param>
 
-             <param name="maxCount">maximum number of trigger keys allow to acquired in the returning list.</param>
 
-             <returns>A (never null, possibly empty) list of the identifiers (Key objects) of the next triggers to be fired.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.SelectFiredTriggerInstanceNames(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select the distinct instance names of all fired-trigger records.
 
-             </summary>
 
-             <remarks>
 
-             This is useful when trying to identify orphaned fired triggers (a 
 
-             fired trigger without a scheduler state record.) 
 
-             </remarks>
 
-             <param name="conn">The conn.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.CountMisfiredTriggersInState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Counts the misfired triggers in states.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="state1">The state1.</param>
 
-             <param name="ts">The ts.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.HasMisfiredTriggersInState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.DateTimeOffset,System.Int32,System.Collections.Generic.IList{Quartz.TriggerKey})">
 
-             <summary>
 
-             Selects the misfired triggers in states.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="state1">The state1.</param>
 
-             <param name="ts">The ts.</param>
 
-             <param name="count">The count.</param>
 
-             <param name="resultList">The result list.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDriverDelegate.ClearData(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Clear (delete!) all scheduling data - all <see cref="T:Quartz.IJob"/>s, <see cref="T:Quartz.ITrigger"/>s
 
-             <see cref="T:Quartz.ICalendar"/>s.
 
-             </summary>
 
-             <param name="conn"></param>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.IDbAccessor">
 
-             <summary>
 
-             Service interface or modifying <see cref="T:System.Data.IDbCommand"/> parameters 
 
-             and resultset values.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDbAccessor.PrepareCommand(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Prepares a <see cref="T:System.Data.IDbCommand"/> to be used to access database.
 
-             </summary>
 
-             <param name="cth">Connection and transaction pair</param>
 
-             <param name="commandText">SQL to run</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDbAccessor.AddCommandParameter(System.Data.IDbCommand,System.String,System.Object)">
 
-             <summary>
 
-             Adds a parameter to <see cref="T:System.Data.IDbCommand"/>.
 
-             </summary>
 
-             <param name="cmd">Command to add parameter to</param>
 
-             <param name="paramName">Parameter's name</param>
 
-             <param name="paramValue">Parameter's value</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDbAccessor.AddCommandParameter(System.Data.IDbCommand,System.String,System.Object,System.Enum)">
 
-             <summary>
 
-             Adds a parameter to <see cref="T:System.Data.IDbCommand"/>.
 
-             </summary>
 
-             <param name="cmd">Command to add parameter to</param>
 
-             <param name="paramName">Parameter's name</param>
 
-             <param name="paramValue">Parameter's value</param>
 
-             <param name="dataType">Parameter's data type</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDbAccessor.GetDbBooleanValue(System.Boolean)">
 
-             <summary>
 
-             Gets the db presentation for boolean value. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="booleanValue">Value to map to database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDbAccessor.GetBooleanFromDbValue(System.Object)">
 
-             <summary>
 
-             Gets the boolean value from db presentation. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="columnValue">Value to map from database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDbAccessor.GetDbDateTimeValue(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Gets the db presentation for date/time value. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="dateTimeValue">Value to map to database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDbAccessor.GetDateTimeFromDbValue(System.Object)">
 
-             <summary>
 
-             Gets the date/time value from db presentation. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="columnValue">Value to map from database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDbAccessor.GetDbTimeSpanValue(System.Nullable{System.TimeSpan})">
 
-             <summary>
 
-             Gets the db presentation for time span value. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="timeSpanValue">Value to map to database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.IDbAccessor.GetTimeSpanFromDbValue(System.Object)">
 
-             <summary>
 
-             Gets the time span value from db presentation. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="columnValue">Value to map from database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.Initialize(Quartz.Impl.AdoJobStore.DelegateInitializationArgs)">
 
-             <summary>
 
-             Initializes the driver delegate.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateTriggerStatesFromOtherStates(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String,System.String)">
 
-             <summary>
 
-             Insert the job detail record.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="newState">the new state for the triggers</param>
 
-             <param name="oldState1">the first old state to update</param>
 
-             <param name="oldState2">the second old state to update</param>
 
-             <returns>number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectMisfiredTriggers(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.DateTimeOffset)">
 
-             <summary>
 
-             Get the names of all of the triggers that have misfired.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="ts">The ts.</param>
 
-             <returns>an array of <see cref="T:Quartz.TriggerKey"/> objects</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggersInState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary> 
 
-             Select all of the triggers in a given state.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="state">The state the triggers must be in</param>
 
-             <returns> an array of trigger <see cref="T:Quartz.TriggerKey"/>s </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.HasMisfiredTriggersInState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Get the names of all of the triggers in the given state that have
 
-             misfired - according to the given timestamp.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="state">The state.</param>
 
-             <param name="ts">The time stamp.</param>
 
-             <returns>An array of <see cref="T:Quartz.TriggerKey"/> objects</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.HasMisfiredTriggersInState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.DateTimeOffset,System.Int32,System.Collections.Generic.IList{Quartz.TriggerKey})">
 
-             <summary>
 
-             Get the names of all of the triggers in the given state that have
 
-             misfired - according to the given timestamp.  No more than count will
 
-             be returned.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="state1">The state1.</param>
 
-             <param name="ts">The ts.</param>
 
-             <param name="count">The most misfired triggers to return, negative for all</param>
 
-             <param name="resultList">
 
-               Output parameter.  A List of <see cref="T:Quartz.TriggerKey"/> objects.  Must not be null
 
-             </param>
 
-             <returns>Whether there are more misfired triggers left to find beyond the given count.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.CountMisfiredTriggersInState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Get the number of triggers in the given state that have
 
-             misfired - according to the given timestamp.
 
-             </summary>
 
-             <param name="conn"></param>
 
-             <param name="state1"></param>
 
-             <param name="ts"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectMisfiredTriggersInGroupInState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Get the names of all of the triggers in the given group and state that
 
-             have misfired.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <param name="state">The state.</param>
 
-             <param name="ts">The timestamp.</param>
 
-             <returns>an array of <see cref="T:Quartz.TriggerKey"/> objects</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggersForRecoveringJobs(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select all of the triggers for jobs that are requesting recovery. The
 
-             returned trigger objects will have unique "recoverXXX" trigger names and
 
-             will be in the <see cref="F:Quartz.SchedulerConstants.DefaultRecoveryGroup"/>
 
-             trigger group.
 
-             </summary>
 
-             <remarks>
 
-             In order to preserve the ordering of the triggers, the fire time will be
 
-             set from the <i>ColumnFiredTime</i> column in the <i>TableFiredTriggers</i>
 
-             table. The caller is responsible for calling <see cref="M:Quartz.Spi.IOperableTrigger.ComputeFirstFireTimeUtc(Quartz.ICalendar)"/>
 
-             on each returned trigger. It is also up to the caller to insert the
 
-             returned triggers to ensure that they are fired.
 
-             </remarks>
 
-             <param name="conn">The DB Connection</param>
 
-             <returns> an array of <see cref="T:Quartz.ITrigger"/> objects</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.DeleteFiredTriggers(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Delete all fired triggers.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <returns>The number of rows deleted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.DeleteFiredTriggers(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Delete all fired triggers of the given instance.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="instanceName">The instance id.</param>
 
-             <returns>The number of rows deleted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.ClearData(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Clear (delete!) all scheduling data - all <see cref="T:Quartz.IJob"/>s, <see cref="T:Quartz.ITrigger"/>s
 
-             <see cref="T:Quartz.ICalendar"/>s.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.InsertJobDetail(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.IJobDetail)">
 
-             <summary>
 
-             Insert the job detail record.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="job">The job to insert.</param>
 
-             <returns>Number of rows inserted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.GetDbBooleanValue(System.Boolean)">
 
-             <summary>
 
-             Gets the db presentation for boolean value. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="booleanValue">Value to map to database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.GetBooleanFromDbValue(System.Object)">
 
-             <summary>
 
-             Gets the boolean value from db presentation. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="columnValue">Value to map from database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.GetDbDateTimeValue(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Gets the db presentation for date/time value. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="dateTimeValue">Value to map to database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.GetDateTimeFromDbValue(System.Object)">
 
-             <summary>
 
-             Gets the date/time value from db presentation. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="columnValue">Value to map from database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.GetDbTimeSpanValue(System.Nullable{System.TimeSpan})">
 
-             <summary>
 
-             Gets the db presentation for time span value. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="timeSpanValue">Value to map to database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.GetTimeSpanFromDbValue(System.Object)">
 
-             <summary>
 
-             Gets the time span value from db presentation. Subclasses can overwrite this behaviour.
 
-             </summary>
 
-             <param name="columnValue">Value to map from database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateJobDetail(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.IJobDetail)">
 
-             <summary>
 
-             Update the job detail record.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="job">The job to update.</param>
 
-             <returns>Number of rows updated.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggerNamesForJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Get the names of all of the triggers associated with the given job.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns>An array of <see cref="T:Quartz.TriggerKey"/> objects</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.DeleteJobDetail(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Delete the job detail record for the given job.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns>the number of rows deleted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.IsJobStateful(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Check whether or not the given job is stateful.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns>
 
-             true if the job exists and is stateful, false otherwise
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.JobExists(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Check whether or not the given job exists.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns>true if the job exists, false otherwise</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateJobData(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.IJobDetail)">
 
-             <summary>
 
-             Update the job data map for the given job.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="job">the job to update</param>
 
-             <returns>the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectJobDetail(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey,Quartz.Spi.ITypeLoadHelper)">
 
-             <summary>
 
-             Select the JobDetail object for a given job name / group name.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <param name="loadHelper">The load helper.</param>
 
-             <returns>The populated JobDetail object.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.GetMapFromProperties(System.Data.IDataReader,System.Int32)">
 
-             <summary> build Map from java.util.Properties encoding.</summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectNumJobs(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select the total number of jobs stored.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <returns>The total number of jobs stored.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectJobGroups(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select all of the job group names that are stored.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <returns>An array of <see cref="T:System.String"/> group names.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectJobsInGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Select all of the jobs contained in a given group.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="matcher"></param>
 
-             <returns>An array of <see cref="T:System.String"/> job names.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.InsertTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger,System.String,Quartz.IJobDetail)">
 
-             <summary>
 
-             Insert the base trigger data.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="trigger">the trigger to insert</param>
 
-             <param name="state">the state that the trigger should be stored in</param>
 
-             <param name="jobDetail">The job detail.</param>
 
-             <returns>the number of rows inserted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.InsertBlobTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Insert the blob trigger data.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="trigger">The trigger to insert.</param>
 
-             <returns>The number of rows inserted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger,System.String,Quartz.IJobDetail)">
 
-             <summary>
 
-             Update the base trigger data.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="trigger">The trigger to insert.</param>
 
-             <param name="state">The state that the trigger should be stored in.</param>
 
-             <param name="jobDetail">The job detail.</param>
 
-             <returns>The number of rows updated.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateBlobTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Update the blob trigger data.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="trigger">The trigger to insert.</param>
 
-             <returns>The number of rows updated.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.TriggerExists(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Check whether or not a trigger exists.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <returns>true if the trigger exists, false otherwise</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateTriggerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,System.String)">
 
-             <summary>
 
-             Update the state for a given trigger.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <param name="state">The new state for the trigger.</param>
 
-             <returns>The number of rows updated.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateTriggerStateFromOtherStates(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,System.String,System.String,System.String,System.String)">
 
-             <summary>
 
-             Update the given trigger to the given new state, if it is one of the
 
-             given old states.
 
-             </summary>
 
-             <param name="conn">The DB connection.</param>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <param name="newState">The new state for the trigger.</param>
 
-             <param name="oldState1">One of the old state the trigger must be in.</param>
 
-             <param name="oldState2">One of the old state the trigger must be in.</param>
 
-             <param name="oldState3">One of the old state the trigger must be in.</param>
 
-             <returns>The number of rows updated.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateTriggerGroupStateFromOtherStates(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey},System.String,System.String,System.String,System.String)">
 
-             <summary>
 
-             Update all triggers in the given group to the given new state, if they
 
-             are in one of the given old states.
 
-             </summary>
 
-             <param name="conn">The DB connection.</param>
 
-             <param name="matcher"></param>
 
-             <param name="newState">The new state for the trigger.</param>
 
-             <param name="oldState1">One of the old state the trigger must be in.</param>
 
-             <param name="oldState2">One of the old state the trigger must be in.</param>
 
-             <param name="oldState3">One of the old state the trigger must be in.</param>
 
-             <returns>The number of rows updated.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateTriggerStateFromOtherState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,System.String,System.String)">
 
-             <summary>
 
-             Update the given trigger to the given new state, if it is in the given
 
-             old state.
 
-             </summary>
 
-             <param name="conn">the DB connection</param>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <param name="newState">the new state for the trigger</param>
 
-             <param name="oldState">the old state the trigger must be in</param>
 
-             <returns>int the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateTriggerGroupStateFromOtherState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey},System.String,System.String)">
 
-             <summary>
 
-             Update all of the triggers of the given group to the given new state, if
 
-             they are in the given old state.
 
-             </summary>
 
-             <param name="conn">the DB connection</param>
 
-             <param name="matcher"></param>
 
-             <param name="newState">the new state for the trigger group</param>
 
-             <param name="oldState">the old state the triggers must be in</param>
 
-             <returns>int the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateTriggerStatesForJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey,System.String)">
 
-             <summary>
 
-             Update the states of all triggers associated with the given job.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="jobKey">the key of the job</param>
 
-             <param name="state">the new state for the triggers</param>
 
-             <returns>the number of rows updated</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateTriggerStatesForJobFromOtherState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey,System.String,System.String)">
 
-             <summary>
 
-             Updates the state of the trigger states for job from other.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="jobKey">Key of the job.</param>
 
-             <param name="state">The state.</param>
 
-             <param name="oldState">The old state.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.DeleteBlobTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Delete the cron trigger data for a trigger.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <returns>the number of rows deleted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.DeleteTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Delete the base trigger data for a trigger.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <returns>the number of rows deleted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectNumTriggersForJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Select the number of triggers associated with a given job.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="jobKey">the key of the job</param>
 
-             <returns>the number of triggers for the given job</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggersForJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Select the triggers for a job
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="jobKey">the key of the job</param>
 
-             <returns>
 
-             an array of <see cref="T:Quartz.ITrigger"/> objects
 
-             associated with a given job.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggersForCalendar(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Select the triggers for a calendar
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <param name="calName">Name of the calendar.</param>
 
-             <returns>
 
-             An array of <see cref="T:Quartz.ITrigger"/> objects associated with a given job.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Select a trigger.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <returns>The <see cref="T:Quartz.ITrigger"/> object</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggerJobDataMap(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Select a trigger's JobDataMap.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <returns>The <see cref="T:Quartz.JobDataMap"/> of the Trigger, never null, but possibly empty. </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Select a trigger's state value.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <returns>The <see cref="T:Quartz.ITrigger"/> object</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggerStatus(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Select a trigger status (state and next fire time).
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="triggerKey">the key of the trigger</param>
 
-             <returns>
 
-             a <see cref="T:Quartz.Impl.AdoJobStore.TriggerStatus"/> object, or null
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectNumTriggers(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select the total number of triggers stored.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <returns>the total number of triggers stored</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggerGroups(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select all of the trigger group names that are stored.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <returns>
 
-             an array of <see cref="T:System.String"/> group names
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggersInGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Select all of the triggers contained in a given group.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="matcher"></param>
 
-             <returns>
 
-             an array of <see cref="T:System.String"/> trigger names
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.InsertPausedTriggerGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Inserts the paused trigger group.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.DeletePausedTriggerGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Deletes the paused trigger group.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.DeleteAllPausedTriggerGroups(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Deletes all paused trigger groups.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.IsTriggerGroupPaused(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Determines whether the specified trigger group is paused.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns>
 
-             	<c>true</c> if trigger group is paused; otherwise, <c>false</c>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.IsExistingTriggerGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Determines whether given trigger group already exists.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns>
 
-             	<c>true</c> if trigger group exists; otherwise, <c>false</c>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.InsertCalendar(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,Quartz.ICalendar)">
 
-             <summary>
 
-             Insert a new calendar.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="calendarName">The name for the new calendar.</param>
 
-             <param name="calendar">The calendar.</param>
 
-             <returns>the number of rows inserted</returns>
 
-             <throws>  IOException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateCalendar(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,Quartz.ICalendar)">
 
-             <summary>
 
-             Update a calendar.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="calendarName">The name for the new calendar.</param>
 
-             <param name="calendar">The calendar.</param>
 
-             <returns>the number of rows updated</returns>
 
-             <throws>  IOException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.CalendarExists(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Check whether or not a calendar exists.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="calendarName">The name of the calendar.</param>
 
-             <returns>
 
-             true if the trigger exists, false otherwise
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectCalendar(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Select a calendar.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="calendarName">The name of the calendar.</param>
 
-             <returns>the Calendar</returns>
 
-             <throws>  ClassNotFoundException </throws>
 
-             <throws>  IOException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.CalendarIsReferenced(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Check whether or not a calendar is referenced by any triggers.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="calendarName">The name of the calendar.</param>
 
-             <returns>
 
-             true if any triggers reference the calendar, false otherwise
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.DeleteCalendar(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Delete a calendar.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="calendarName">The name of the trigger.</param>
 
-             <returns>the number of rows deleted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectNumCalendars(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select the total number of calendars stored.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <returns>the total number of calendars stored</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectCalendars(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select all of the stored calendars.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <returns>
 
-             an array of <see cref="T:System.String"/> calendar names
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggerForFireTime(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.DateTimeOffset)">
 
-             <summary>
 
-             Select the trigger that will be fired at the given fire time.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="fireTime">the time that the trigger will be fired</param>
 
-             <returns>
 
-             a <see cref="T:Quartz.TriggerKey"/> representing the
 
-             trigger that will be fired at the given fire time, or null if no
 
-             trigger will be fired at that time
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectTriggerToAcquire(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.DateTimeOffset,System.DateTimeOffset,System.Int32)">
 
-             <summary>
 
-             Select the next trigger which will fire to fire between the two given timestamps 
 
-             in ascending order of fire time, and then descending by priority.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="noLaterThan">highest value of <see cref="M:Quartz.ITrigger.GetNextFireTimeUtc"/> of the triggers (exclusive)</param>
 
-             <param name="noEarlierThan">highest value of <see cref="M:Quartz.ITrigger.GetNextFireTimeUtc"/> of the triggers (inclusive)</param>
 
-             <param name="maxCount">maximum number of trigger keys allow to acquired in the returning list.</param>
 
-             <returns>A (never null, possibly empty) list of the identifiers (Key objects) of the next triggers to be fired.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.InsertFiredTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger,System.String,Quartz.IJobDetail)">
 
-             <summary>
 
-             Insert a fired trigger.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="trigger">the trigger</param>
 
-             <param name="state">the state that the trigger should be stored in</param>
 
-             <param name="job">The job.</param>
 
-             <returns>the number of rows inserted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateFiredTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger,System.String,Quartz.IJobDetail)">
 
-             <summary>
 
-             <para>
 
-             Update a fired trigger.
 
-             </para>
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="conn"></param>
 
-             the DB Connection
 
-             <param name="trigger"></param>
 
-             the trigger
 
-             <param name="state"></param>
 
-             <param name="job"></param>
 
-             the state that the trigger should be stored in
 
-             <returns>the number of rows inserted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectFiredTriggerRecords(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String)">
 
-             <summary>
 
-             Select the states of all fired-trigger records for a given trigger, or
 
-             trigger group if trigger name is <see langword="null"/>.
 
-             </summary>
 
-             <param name="conn">The DB connection.</param>
 
-             <param name="triggerName">Name of the trigger.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns>a List of <see cref="T:Quartz.Impl.AdoJobStore.FiredTriggerRecord"/> objects.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectFiredTriggerRecordsByJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String)">
 
-             <summary>
 
-             Select the states of all fired-trigger records for a given job, or job
 
-             group if job name is <see langword="null"/>.
 
-             </summary>
 
-             <param name="conn">The DB connection.</param>
 
-             <param name="jobName">Name of the job.</param>
 
-             <param name="groupName">Name of the group.</param>
 
-             <returns>a List of <see cref="T:Quartz.Impl.AdoJobStore.FiredTriggerRecord"/> objects.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectInstancesFiredTriggerRecords(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Select the states of all fired-trigger records for a given scheduler
 
-             instance.
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="instanceName">Name of the instance.</param>
 
-             <returns>A list of FiredTriggerRecord objects.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectFiredTriggerInstanceNames(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Select the distinct instance names of all fired-trigger records.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <returns></returns>
 
-             <remarks>
 
-             This is useful when trying to identify orphaned fired triggers (a
 
-             fired trigger without a scheduler state record.)
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.DeleteFiredTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Delete a fired trigger.
 
-             </summary>
 
-             <param name="conn">the DB Connection</param>
 
-             <param name="entryId">the fired trigger entry to delete</param>
 
-             <returns>the number of rows deleted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectJobExecutionCount(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Selects the job execution count.
 
-             </summary>
 
-             <param name="conn">The DB connection.</param>
 
-             <param name="jobKey">The key of the job.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.InsertSchedulerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.DateTimeOffset,System.TimeSpan)">
 
-             <summary>
 
-             Inserts the state of the scheduler.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="instanceName">The instance id.</param>
 
-             <param name="checkInTime">The check in time.</param>
 
-             <param name="interval">The interval.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.DeleteSchedulerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             Deletes the state of the scheduler.
 
-             </summary>
 
-             <param name="conn">The database connection.</param>
 
-             <param name="instanceName">The instance id.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.UpdateSchedulerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Updates the state of the scheduler.
 
-             </summary>
 
-             <param name="conn">The database connection.</param>
 
-             <param name="instanceName">The instance id.</param>
 
-             <param name="checkInTime">The check in time.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectSchedulerStateRecords(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary>
 
-             A List of all current <see cref="T:Quartz.Impl.AdoJobStore.SchedulerStateRecord"/>s.
 
-             <para>
 
-             If instanceId is not null, then only the record for the identified
 
-             instance will be returned.
 
-             </para>
 
-             </summary>
 
-             <param name="conn">The DB Connection</param>
 
-             <param name="instanceName">The instance id.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.ReplaceTablePrefix(System.String)">
 
-             <summary>
 
-             Replace the table prefix in a query by replacing any occurrences of
 
-             "{0}" with the table prefix.
 
-             </summary>
 
-             <param name="query">The unsubstituted query</param>
 
-             <returns>The query, with proper table prefix substituted</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SerializeObject(System.Object)">
 
-             <summary>
 
-             Create a serialized <see langword="byte[]"/> version of an Object.
 
-             </summary>
 
-             <param name="obj">the object to serialize</param>
 
-             <returns>Serialized object as byte array.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SerializeJobData(Quartz.JobDataMap)">
 
-             <summary>
 
-             Remove the transient data from and then create a serialized <see cref="T:System.IO.MemoryStream"/>
 
-             version of a <see cref="T:Quartz.JobDataMap"/> and returns the underlying bytes.
 
-             </summary>
 
-             <param name="data">The data.</param>
 
-             <returns>the serialized data as byte array</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SerializeProperties(Quartz.JobDataMap)">
 
-             <summary>
 
-             serialize
 
-             </summary>
 
-             <param name="data">The data.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.ConvertFromProperty(System.Collections.Specialized.NameValueCollection)">
 
-             <summary> 
 
-             Convert the JobDataMap into a list of properties.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.ConvertToProperty(System.Collections.Generic.IDictionary{System.String,System.Object})">
 
-             <summary>
 
-             Convert the JobDataMap into a list of properties.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.GetObjectFromBlob``1(System.Data.IDataReader,System.Int32)">
 
-             <summary>
 
-             This method should be overridden by any delegate subclasses that need
 
-             special handling for BLOBs. The default implementation uses standard
 
-             ADO.NET operations.
 
-             </summary>
 
-             <param name="rs">The data reader, already queued to the correct row.</param>
 
-             <param name="colIndex">The column index for the BLOB.</param>
 
-             <returns>The deserialized object from the DataReader BLOB.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.GetJobDataFromBlob``1(System.Data.IDataReader,System.Int32)">
 
-             <summary>
 
-             This method should be overridden by any delegate subclasses that need
 
-             special handling for BLOBs for job details. 
 
-             </summary>
 
-             <param name="rs">The result set, already queued to the correct row.</param>
 
-             <param name="colIndex">The column index for the BLOB.</param>
 
-             <returns>The deserialized Object from the ResultSet BLOB.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdAdoDelegate.SelectPausedTriggerGroups(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Selects the paused trigger groups.
 
-             </summary>
 
-             <param name="conn">The DB Connection.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.FirebirdDelegate.GetSelectNextTriggerToAcquireSql(System.Int32)">
 
-             <summary>
 
-             Gets the select next trigger to acquire SQL clause.
 
-             FireBird version with ROWS support.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.FiredTriggerRecord">
 
-             <summary>
 
-             Conveys the state of a fired-trigger record.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.FiredTriggerRecord.FireInstanceId">
 
-             <summary>
 
-             Gets or sets the fire instance id.
 
-             </summary>
 
-             <value>The fire instance id.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.FiredTriggerRecord.FireTimestamp">
 
-             <summary>
 
-             Gets or sets the fire timestamp.
 
-             </summary>
 
-             <value>The fire timestamp.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.FiredTriggerRecord.ScheduleTimestamp">
 
-             <summary>
 
-             Gets or sets the scheduled fire timestamp.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.FiredTriggerRecord.JobDisallowsConcurrentExecution">
 
-             <summary>
 
-             Gets or sets a value indicating whether job disallows concurrent execution.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.FiredTriggerRecord.JobKey">
 
-             <summary>
 
-             Gets or sets the job key.
 
-             </summary>
 
-             <value>The job key.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.FiredTriggerRecord.SchedulerInstanceId">
 
-             <summary>
 
-             Gets or sets the scheduler instance id.
 
-             </summary>
 
-             <value>The scheduler instance id.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.FiredTriggerRecord.TriggerKey">
 
-             <summary>
 
-             Gets or sets the trigger key.
 
-             </summary>
 
-             <value>The trigger key.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.FiredTriggerRecord.FireInstanceState">
 
-             <summary>
 
-             Gets or sets the state of the fire instance.
 
-             </summary>
 
-             <value>The state of the fire instance.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.FiredTriggerRecord.JobRequestsRecovery">
 
-             <summary>
 
-             Gets or sets a value indicating whether [job requests recovery].
 
-             </summary>
 
-             <value><c>true</c> if [job requests recovery]; otherwise, <c>false</c>.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.FiredTriggerRecord.Priority">
 
-             <summary>
 
-             Gets or sets the priority.
 
-             </summary>
 
-             <value>The priority.</value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.InvalidConfigurationException">
 
-             <summary>
 
-             Exception class for when a driver delegate cannot be found for a given
 
-             configuration, or lack thereof.
 
-             </summary>
 
-             <author>  <a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.SchedulerException">
 
-             <summary> 
 
-             Base class for exceptions thrown by the Quartz <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-             <remarks>
 
-             SchedulerExceptions may contain a reference to another
 
-             <see cref="T:System.Exception"/>, which was the underlying cause of the SchedulerException.
 
-             </remarks>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerException.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.SchedulerException"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerException.#ctor(System.String)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.SchedulerException"/> class.
 
-             </summary>
 
-             <param name="msg">The MSG.</param>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.SchedulerException"/> class.
 
-             </summary>
 
-             <param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"></see> that holds the serialized object data about the exception being thrown.</param>
 
-             <param name="context">The <see cref="T:System.Runtime.Serialization.StreamingContext"></see> that contains contextual information about the source or destination.</param>
 
-             <exception cref="T:System.Runtime.Serialization.SerializationException">The class name is null or <see cref="P:System.Exception.HResult"></see> is zero (0). </exception>
 
-             <exception cref="T:System.ArgumentNullException">The info parameter is null. </exception>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerException.#ctor(System.Exception)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.SchedulerException"/> class.
 
-             </summary>
 
-             <param name="cause">The cause.</param>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerException.#ctor(System.String,System.Exception)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.SchedulerException"/> class.
 
-             </summary>
 
-             <param name="msg">The MSG.</param>
 
-             <param name="cause">The cause.</param>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerException.ToString">
 
-             <summary>
 
-             Creates and returns a string representation of the current exception.
 
-             </summary>
 
-             <returns>
 
-             A string representation of the current exception.
 
-             </returns>
 
-             <PermissionSet><IPermission class="System.Security.Permissions.FileIOPermission, mscorlib, Version=2.0.3600.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" PathDiscovery="*AllFiles*"/></PermissionSet>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.InvalidConfigurationException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.InvalidConfigurationException"/> class.
 
-             </summary>
 
-             <param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"></see> that holds the serialized object data about the exception being thrown.</param>
 
-             <param name="context">The <see cref="T:System.Runtime.Serialization.StreamingContext"></see> that contains contextual information about the source or destination.</param>
 
-             <exception cref="T:System.Runtime.Serialization.SerializationException">The class name is null or <see cref="P:System.Exception.HResult"></see> is zero (0). </exception>
 
-             <exception cref="T:System.ArgumentNullException">The info parameter is null. </exception>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.JobStoreCMT">
 
-             <summary>
 
-              <see cref="T:Quartz.Impl.AdoJobStore.JobStoreCMT"/> is meant to be used in an application-server
 
-              or other software framework environment that provides 
 
-              container-managed-transactions. No commit / rollback will be handled by this class.
 
-              </summary>
 
-              <remarks>
 
-              If you need commit / rollback, use <see cref="T:Quartz.Impl.AdoJobStore.JobStoreTX"/>
 
-              instead.
 
-              </remarks>
 
-              <author><a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-              <author>James House</author>
 
-              <author>Srinivas Venkatarangaiah</author>
 
-              <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.JobStoreSupport">
 
-             <summary>
 
-             Contains base functionality for ADO.NET-based JobStore implementations.
 
-             </summary>
 
-             <author><a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Spi.IJobStore">
 
-             <summary> 
 
-             The interface to be implemented by classes that want to provide a <see cref="T:Quartz.IJob"/>
 
-             and <see cref="T:Quartz.ITrigger"/> storage mechanism for the
 
-             <see cref="T:Quartz.Core.QuartzScheduler"/>'s use.
 
-             </summary>
 
-             <remarks>
 
-             Storage of <see cref="T:Quartz.IJob"/> s and <see cref="T:Quartz.ITrigger"/> s should be keyed
 
-             on the combination of their name and group for uniqueness.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.Core.QuartzScheduler"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.IJobDetail"/>
 
-             <seealso cref="T:Quartz.JobDataMap"/>
 
-             <seealso cref="T:Quartz.ICalendar"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.Initialize(Quartz.Spi.ITypeLoadHelper,Quartz.Spi.ISchedulerSignaler)">
 
-             <summary>
 
-             Called by the QuartzScheduler before the <see cref="T:Quartz.Spi.IJobStore"/> is
 
-             used, in order to give the it a chance to Initialize.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.SchedulerStarted">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the <see cref="T:Quartz.Spi.IJobStore"/> that
 
-             the scheduler has started.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.SchedulerPaused">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the JobStore that
 
-             the scheduler has been paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.SchedulerResumed">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the JobStore that
 
-             the scheduler has resumed after being paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.Shutdown">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the <see cref="T:Quartz.Spi.IJobStore"/> that
 
-             it should free up all of it's resources because the scheduler is
 
-             shutting down.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.StoreJobAndTrigger(Quartz.IJobDetail,Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.IJobDetail"/> and <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <param name="newJob">The <see cref="T:Quartz.IJobDetail"/> to be stored.</param>
 
-             <param name="newTrigger">The <see cref="T:Quartz.ITrigger"/> to be stored.</param>
 
-             <throws>  ObjectAlreadyExistsException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.IsJobGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given JobGroup is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.IsTriggerGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given TriggerGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.StoreJob(Quartz.IJobDetail,System.Boolean)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.IJobDetail"/>.
 
-             </summary>
 
-             <param name="newJob">The <see cref="T:Quartz.IJobDetail"/> to be stored.</param>
 
-             <param name="replaceExisting">
 
-             If <see langword="true"/>, any <see cref="T:Quartz.IJob"/> existing in the
 
-             <see cref="T:Quartz.Spi.IJobStore"/> with the same name and group should be
 
-             over-written.
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.RemoveJob(Quartz.JobKey)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.IJob"/> with the given
 
-             key, and any <see cref="T:Quartz.ITrigger"/> s that reference
 
-             it.
 
-             </summary>
 
-             <remarks>
 
-             If removal of the <see cref="T:Quartz.IJob"/> results in an empty group, the
 
-             group should be removed from the <see cref="T:Quartz.Spi.IJobStore"/>'s list of
 
-             known group names.
 
-             </remarks>
 
-             <returns>
 
-             	<see langword="true"/> if a <see cref="T:Quartz.IJob"/> with the given name and
 
-             group was found and removed from the store.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.RetrieveJob(Quartz.JobKey)">
 
-             <summary>
 
-             Retrieve the <see cref="T:Quartz.IJobDetail"/> for the given
 
-             <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-             <returns>
 
-             The desired <see cref="T:Quartz.IJob"/>, or null if there is no match.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.StoreTrigger(Quartz.Spi.IOperableTrigger,System.Boolean)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <param name="newTrigger">The <see cref="T:Quartz.ITrigger"/> to be stored.</param>
 
-             <param name="replaceExisting">If <see langword="true"/>, any <see cref="T:Quartz.ITrigger"/> existing in
 
-             the <see cref="T:Quartz.Spi.IJobStore"/> with the same name and group should
 
-             be over-written.</param>
 
-             <throws>  ObjectAlreadyExistsException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.RemoveTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.ITrigger"/> with the given key.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             If removal of the <see cref="T:Quartz.ITrigger"/> results in an empty group, the
 
-             group should be removed from the <see cref="T:Quartz.Spi.IJobStore"/>'s list of
 
-             known group names.
 
-             </para>
 
-             <para>
 
-             If removal of the <see cref="T:Quartz.ITrigger"/> results in an 'orphaned' <see cref="T:Quartz.IJob"/>
 
-             that is not 'durable', then the <see cref="T:Quartz.IJob"/> should be deleted
 
-             also.
 
-             </para>
 
-             </remarks>
 
-             <returns>
 
-             	<see langword="true"/> if a <see cref="T:Quartz.ITrigger"/> with the given
 
-             name and group was found and removed from the store.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.ReplaceTrigger(Quartz.TriggerKey,Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.ITrigger"/> with the
 
-             given name, and store the new given one - which must be associated
 
-             with the same job.
 
-             </summary>
 
-             <param name="triggerKey">The <see cref="T:Quartz.ITrigger"/> to be replaced.</param>
 
-             <param name="newTrigger">The new <see cref="T:Quartz.ITrigger"/> to be stored.</param>
 
-             <returns>
 
-             	<see langword="true"/> if a <see cref="T:Quartz.ITrigger"/> with the given
 
-             name and group was found and removed from the store.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.RetrieveTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Retrieve the given <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <returns>
 
-             The desired <see cref="T:Quartz.ITrigger"/>, or null if there is no
 
-             match.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.CalendarExists(System.String)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.ICalendar"/> with the given identifier already
 
-             exists within the scheduler.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="calName">the identifier to check for</param>
 
-             <returns>true if a calendar exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.CheckExists(Quartz.JobKey)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.IJob"/> with the given identifier already
 
-             exists within the scheduler.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="jobKey">the identifier to check for</param>
 
-             <returns>true if a job exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.CheckExists(Quartz.TriggerKey)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.ITrigger"/> with the given identifier already
 
-             exists within the scheduler.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="triggerKey">the identifier to check for</param>
 
-             <returns>true if a trigger exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.ClearAllSchedulingData">
 
-             <summary>
 
-             Clear (delete!) all scheduling data - all <see cref="T:Quartz.IJob"/>s, <see cref="T:Quartz.ITrigger"/>s
 
-             <see cref="T:Quartz.ICalendar"/>s.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.StoreCalendar(System.String,Quartz.ICalendar,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.ICalendar"/>.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="calendar">The <see cref="T:Quartz.ICalendar"/> to be stored.</param>
 
-             <param name="replaceExisting">If <see langword="true"/>, any <see cref="T:Quartz.ICalendar"/> existing
 
-             in the <see cref="T:Quartz.Spi.IJobStore"/> with the same name and group
 
-             should be over-written.</param>
 
-             <param name="updateTriggers">If <see langword="true"/>, any <see cref="T:Quartz.ITrigger"/>s existing
 
-             in the <see cref="T:Quartz.Spi.IJobStore"/> that reference an existing
 
-             Calendar with the same name with have their next fire time
 
-             re-computed with the new <see cref="T:Quartz.ICalendar"/>.</param>
 
-             <throws>  ObjectAlreadyExistsException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.RemoveCalendar(System.String)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.ICalendar"/> with the
 
-             given name.
 
-             </summary>
 
-             <remarks>
 
-             If removal of the <see cref="T:Quartz.ICalendar"/> would result in
 
-             <see cref="T:Quartz.ITrigger"/>s pointing to non-existent calendars, then a
 
-             <see cref="T:Quartz.JobPersistenceException"/> will be thrown.
 
-             </remarks>
 
-             <param name="calName">The name of the <see cref="T:Quartz.ICalendar"/> to be removed.</param>
 
-             <returns>
 
-             	<see langword="true"/> if a <see cref="T:Quartz.ICalendar"/> with the given name
 
-             was found and removed from the store.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.RetrieveCalendar(System.String)">
 
-             <summary>
 
-             Retrieve the given <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <param name="calName">The name of the <see cref="T:Quartz.ICalendar"/> to be retrieved.</param>
 
-             <returns>
 
-             The desired <see cref="T:Quartz.ICalendar"/>, or null if there is no
 
-             match.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetNumberOfJobs">
 
-             <summary>
 
-             Get the number of <see cref="T:Quartz.IJob"/>s that are
 
-             stored in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetNumberOfTriggers">
 
-             <summary>
 
-             Get the number of <see cref="T:Quartz.ITrigger"/>s that are
 
-             stored in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetNumberOfCalendars">
 
-             <summary>
 
-             Get the number of <see cref="T:Quartz.ICalendar"/> s that are
 
-             stored in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetJobKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.IJob"/> s that
 
-             have the given group name.
 
-             <para>
 
-             If there are no jobs in the given group name, the result should be a
 
-             zero-length array (not <see langword="null"/>).
 
-             </para>
 
-             </summary>
 
-             <param name="matcher"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetTriggerKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.ITrigger"/>s
 
-             that have the given group name.
 
-             <para>
 
-             If there are no triggers in the given group name, the result should be a
 
-             zero-length array (not <see langword="null"/>).
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetJobGroupNames">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.IJob"/>
 
-             groups.
 
-             <para>
 
-             If there are no known group names, the result should be a zero-length
 
-             array (not <see langword="null"/>).
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetTriggerGroupNames">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.ITrigger"/>
 
-             groups.
 
-             <para>
 
-             If there are no known group names, the result should be a zero-length
 
-             array (not <see langword="null"/>).
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetCalendarNames">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.ICalendar"/> s
 
-             in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             
 
-             <para>
 
-             If there are no Calendars in the given group name, the result should be
 
-             a zero-length array (not <see langword="null"/>).
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetTriggersForJob(Quartz.JobKey)">
 
-             <summary>
 
-             Get all of the Triggers that are associated to the given Job.
 
-             </summary>
 
-             <remarks>
 
-             If there are no matches, a zero-length array should be returned.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetTriggerState(Quartz.TriggerKey)">
 
-             <summary>
 
-             Get the current state of the identified <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <seealso cref="T:Quartz.TriggerState"/>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.PauseTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Pause the <see cref="T:Quartz.ITrigger"/> with the given key.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.ITrigger"/>s in the
 
-             given group.
 
-             </summary>
 
-             <remarks>
 
-             The JobStore should "remember" that the group is paused, and impose the
 
-             pause on any new triggers that are added to the group while the group is
 
-             paused.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.PauseJob(Quartz.JobKey)">
 
-             <summary>
 
-             Pause the <see cref="T:Quartz.IJob"/> with the given key - by
 
-             pausing all of its current <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.PauseJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.IJob"/>s in the given
 
-             group - by pausing all of their <see cref="T:Quartz.ITrigger"/>s.
 
-             <para>
 
-             The JobStore should "remember" that the group is paused, and impose the
 
-             pause on any new jobs that are added to the group while the group is
 
-             paused.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="T:System.String">
 
-             </seealso>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.ResumeTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Resume (un-pause) the <see cref="T:Quartz.ITrigger"/> with the
 
-             given key.
 
-             
 
-             <para>
 
-             If the <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="T:System.String">
 
-             </seealso>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Resume (un-pause) all of the <see cref="T:Quartz.ITrigger"/>s
 
-             in the given group.
 
-             <para>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.GetPausedTriggerGroups">
 
-             <summary>
 
-             Gets the paused trigger groups.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.ResumeJob(Quartz.JobKey)">
 
-             <summary> 
 
-             Resume (un-pause) the <see cref="T:Quartz.IJob"/> with the
 
-             given key.
 
-             <para>
 
-             If any of the <see cref="T:Quartz.IJob"/>'s<see cref="T:Quartz.ITrigger"/> s missed one
 
-             or more fire-times, then the <see cref="T:Quartz.ITrigger"/>'s misfire
 
-             instruction will be applied.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.ResumeJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Resume (un-pause) all of the <see cref="T:Quartz.IJob"/>s in
 
-             the given group.
 
-             <para>
 
-             If any of the <see cref="T:Quartz.IJob"/> s had <see cref="T:Quartz.ITrigger"/> s that
 
-             missed one or more fire-times, then the <see cref="T:Quartz.ITrigger"/>'s
 
-             misfire instruction will be applied.
 
-             </para> 
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.PauseAll">
 
-             <summary>
 
-             Pause all triggers - equivalent of calling <see cref="M:Quartz.Spi.IJobStore.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             on every group.
 
-             <para>
 
-             When <see cref="M:Quartz.Spi.IJobStore.ResumeAll"/> is called (to un-pause), trigger misfire
 
-             instructions WILL be applied.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="M:Quartz.Spi.IJobStore.ResumeAll"/>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.ResumeAll">
 
-             <summary>
 
-             Resume (un-pause) all triggers - equivalent of calling <see cref="M:Quartz.Spi.IJobStore.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             on every group.
 
-             <para>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </para>
 
-             
 
-             </summary>
 
-             <seealso cref="M:Quartz.Spi.IJobStore.PauseAll"/>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.AcquireNextTriggers(System.DateTimeOffset,System.Int32,System.TimeSpan)">
 
-             <summary>
 
-             Get a handle to the next trigger to be fired, and mark it as 'reserved'
 
-             by the calling scheduler.
 
-             </summary>
 
-             <param name="noLaterThan">If > 0, the JobStore should only return a Trigger
 
-             that will fire no later than the time represented in this value as
 
-             milliseconds.</param>
 
-             <param name="maxCount"></param>
 
-             <param name="timeWindow"></param>
 
-             <returns></returns>
 
-             <seealso cref="T:Quartz.ITrigger">
 
-             </seealso>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.ReleaseAcquiredTrigger(Quartz.Spi.IOperableTrigger)">
 
-             <summary> 
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> that the scheduler no longer plans to
 
-             fire the given <see cref="T:Quartz.ITrigger"/>, that it had previously acquired
 
-             (reserved).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.TriggersFired(System.Collections.Generic.IList{Quartz.Spi.IOperableTrigger})">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> that the scheduler is now firing the
 
-             given <see cref="T:Quartz.ITrigger"/> (executing its associated <see cref="T:Quartz.IJob"/>),
 
-             that it had previously acquired (reserved).
 
-             </summary>
 
-             <returns>
 
-             May return null if all the triggers or their calendars no longer exist, or
 
-             if the trigger was not successfully put into the 'executing'
 
-             state.  Preference is to return an empty list if none of the triggers
 
-             could be fired.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobStore.TriggeredJobComplete(Quartz.Spi.IOperableTrigger,Quartz.IJobDetail,Quartz.SchedulerInstruction)">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> that the scheduler has completed the
 
-             firing of the given <see cref="T:Quartz.ITrigger"/> (and the execution its
 
-             associated <see cref="T:Quartz.IJob"/>), and that the <see cref="T:Quartz.JobDataMap"/>
 
-             in the given <see cref="T:Quartz.IJobDetail"/> should be updated if the <see cref="T:Quartz.IJob"/>
 
-             is stateful.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IJobStore.SupportsPersistence">
 
-             <summary>
 
-             Indicates whether job store supports persistence.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IJobStore.EstimatedTimeToReleaseAndAcquireTrigger">
 
-             <summary>
 
-             How long (in milliseconds) the <see cref="T:Quartz.Spi.IJobStore"/> implementation 
 
-             estimates that it will take to release a trigger and acquire a new one. 
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IJobStore.Clustered">
 
-             <summary>
 
-             Whether or not the <see cref="T:Quartz.Spi.IJobStore"/> implementation is clustered.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IJobStore.InstanceId">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> of the Scheduler instance's Id, 
 
-             prior to initialize being invoked.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IJobStore.InstanceName">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> of the Scheduler instance's name, 
 
-             prior to initialize being invoked.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IJobStore.ThreadPoolSize">
 
-             <summary>
 
-             Tells the JobStore the pool size used to execute jobs.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.JobStoreSupport"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetConnection">
 
-             <summary>
 
-             Gets the connection and starts a new transaction.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.Initialize(Quartz.Spi.ITypeLoadHelper,Quartz.Spi.ISchedulerSignaler)">
 
-             <summary>
 
-             Called by the QuartzScheduler before the <see cref="T:Quartz.Spi.IJobStore"/> is
 
-             used, in order to give it a chance to Initialize.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.SchedulerStarted">
 
-             <seealso cref="M:Quartz.Spi.IJobStore.SchedulerStarted"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.SchedulerPaused">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the JobStore that
 
-             the scheduler has been paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.SchedulerResumed">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the JobStore that
 
-             the scheduler has resumed after being paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.Shutdown">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the <see cref="T:Quartz.Spi.IJobStore"/> that
 
-             it should free up all of it's resources because the scheduler is
 
-             shutting down.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RecoverJobs">
 
-             <summary>
 
-             Will recover any failed or misfired jobs and clean up the data store as
 
-             appropriate.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RecoverJobs(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Will recover any failed or misfired jobs and clean up the data store as
 
-             appropriate.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.StoreJobAndTrigger(Quartz.IJobDetail,Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.IJobDetail"/> and <see cref="T:Quartz.Spi.IOperableTrigger"/>.
 
-             </summary>
 
-             <param name="newJob">Job to be stored.</param>
 
-             <param name="newTrigger">Trigger to be stored.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.IsJobGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given JobGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.IsTriggerGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given TriggerGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.StoreJob(Quartz.IJobDetail,System.Boolean)">
 
-             <summary>
 
-             Stores the given <see cref="T:Quartz.IJobDetail"/>.
 
-             </summary>
 
-             <param name="newJob">The <see cref="T:Quartz.IJobDetail"/> to be stored.</param>
 
-             <param name="replaceExisting">
 
-             If <see langword="true"/>, any <see cref="T:Quartz.IJob"/> existing in the
 
-             <see cref="T:Quartz.Spi.IJobStore"/> with the same name & group should be over-written.
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.StoreJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.IJobDetail,System.Boolean)">
 
-             <summary> <para>
 
-             Insert or update a job.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.JobExists(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Check existence of a given job.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.StoreTrigger(Quartz.Spi.IOperableTrigger,System.Boolean)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <param name="newTrigger">The <see cref="T:Quartz.ITrigger"/> to be stored.</param>
 
-             <param name="replaceExisting">
 
-             If <see langword="true"/>, any <see cref="T:Quartz.ITrigger"/> existing in
 
-             the <see cref="T:Quartz.Spi.IJobStore"/> with the same name & group should
 
-             be over-written.
 
-             </param>
 
-             <exception cref="T:Quartz.ObjectAlreadyExistsException">
 
-             if a <see cref="T:Quartz.ITrigger"/> with the same name/group already
 
-             exists, and replaceExisting is set to false.
 
-             </exception>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.StoreTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Spi.IOperableTrigger,Quartz.IJobDetail,System.Boolean,System.String,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Insert or update a trigger.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.TriggerExists(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Check existence of a given trigger.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RemoveJob(Quartz.JobKey)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.IJob"/> with the given
 
-             name, and any <see cref="T:Quartz.ITrigger"/> s that reference
 
-             it.
 
-             </summary>
 
-             
 
-             <remarks>
 
-             If removal of the <see cref="T:Quartz.IJob"/> results in an empty group, the
 
-             group should be removed from the <see cref="T:Quartz.Spi.IJobStore"/>'s list of
 
-             known group names.
 
-             </remarks>
 
-             <returns>
 
-             <see langword="true"/> if a <see cref="T:Quartz.IJob"/> with the given name &
 
-             group was found and removed from the store.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.DeleteJobAndChildren(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey)">
 
-             <summary>
 
-             Delete a job and its listeners.
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RemoveJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey,System.Boolean)"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RemoveTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,Quartz.IJobDetail)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.DeleteTriggerAndChildren(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Delete a trigger, its listeners, and its Simple/Cron/BLOB sub-table entry.
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RemoveJob(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey,System.Boolean)"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RemoveTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,Quartz.IJobDetail)"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ReplaceTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey,Quartz.Spi.IOperableTrigger)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RetrieveJob(Quartz.JobKey)">
 
-             <summary>
 
-             Retrieve the <see cref="T:Quartz.IJobDetail"/> for the given
 
-             <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-             <param name="jobKey">The key identifying the job.</param>
 
-             <returns>The desired <see cref="T:Quartz.IJob"/>, or null if there is no match.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RemoveTrigger(Quartz.TriggerKey)">
 
-              <summary>
 
-              Remove (delete) the <see cref="T:Quartz.ITrigger"/> with the
 
-              given name.
 
-              </summary>
 
-              
 
-              <remarks>
 
-              <para>
 
-              If removal of the <see cref="T:Quartz.ITrigger"/> results in an empty group, the
 
-              group should be removed from the <see cref="T:Quartz.Spi.IJobStore"/>'s list of
 
-              known group names.
 
-              </para>
 
-              
 
-              <para>
 
-              If removal of the <see cref="T:Quartz.ITrigger"/> results in an 'orphaned' <see cref="T:Quartz.IJob"/>
 
-              that is not 'durable', then the <see cref="T:Quartz.IJob"/> should be deleted
 
-              also.
 
-              </para>
 
-              </remarks>
 
-              <param name="triggerKey">The key identifying the trigger.</param>
 
-              <returns>
 
-              <see langword="true"/> if a <see cref="T:Quartz.ITrigger"/> with the given
 
-              name & group was found and removed from the store.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ReplaceTrigger(Quartz.TriggerKey,Quartz.Spi.IOperableTrigger)">
 
-             <see cref="M:Quartz.Spi.IJobStore.ReplaceTrigger(Quartz.TriggerKey,Quartz.Spi.IOperableTrigger)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RetrieveTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Retrieve the given <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <returns>The desired <see cref="T:Quartz.ITrigger"/>, or null if there is no match.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetTriggerState(Quartz.TriggerKey)">
 
-             <summary>
 
-             Get the current state of the identified <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <seealso cref="F:Quartz.TriggerState.Normal"/>
 
-             <seealso cref="F:Quartz.TriggerState.Paused"/>
 
-             <seealso cref="F:Quartz.TriggerState.Complete"/>
 
-             <seealso cref="F:Quartz.TriggerState.Error"/>
 
-             <seealso cref="F:Quartz.TriggerState.None"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetTriggerState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Gets the state of the trigger.
 
-             </summary>
 
-             <param name="conn">The conn.</param>
 
-             <param name="triggerKey">The key identifying the trigger.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.StoreCalendar(System.String,Quartz.ICalendar,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.ICalendar"/>.
 
-             </summary>
 
-             <param name="calName">The name of the calendar.</param>
 
-             <param name="calendar">The <see cref="T:Quartz.ICalendar"/> to be stored.</param>
 
-             <param name="replaceExisting">
 
-             If <see langword="true"/>, any <see cref="T:Quartz.ICalendar"/> existing
 
-             in the <see cref="T:Quartz.Spi.IJobStore"/> with the same name & group
 
-             should be over-written.
 
-             </param>
 
-             <param name="updateTriggers"></param>
 
-             <exception cref="T:Quartz.ObjectAlreadyExistsException">
 
-                       if a <see cref="T:Quartz.ICalendar"/> with the same name already
 
-                       exists, and replaceExisting is set to false.
 
-             </exception>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RemoveCalendar(System.String)">
 
-              <summary>
 
-              Remove (delete) the <see cref="T:Quartz.ICalendar"/> with the given name.
 
-              </summary>
 
-              <remarks>
 
-              If removal of the <see cref="T:Quartz.ICalendar"/> would result in
 
-              <see cref="T:Quartz.ITrigger"/>s pointing to non-existent calendars, then a
 
-              <see cref="T:Quartz.JobPersistenceException"/> will be thrown.
 
-              </remarks>
 
-              <param name="calName">The name of the <see cref="T:Quartz.ICalendar"/> to be removed.</param>
 
-              <returns>
 
-              <see langword="true"/> if a <see cref="T:Quartz.ICalendar"/> with the given name
 
-              was found and removed from the store.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RetrieveCalendar(System.String)">
 
-             <summary>
 
-             Retrieve the given <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <param name="calName">The name of the <see cref="T:Quartz.ICalendar"/> to be retrieved.</param>
 
-             <returns>The desired <see cref="T:Quartz.ICalendar"/>, or null if there is no match.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetNumberOfJobs">
 
-             <summary>
 
-             Get the number of <see cref="T:Quartz.IJob"/> s that are
 
-             stored in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetNumberOfTriggers">
 
-             <summary>
 
-             Get the number of <see cref="T:Quartz.ITrigger"/> s that are
 
-             stored in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetNumberOfCalendars">
 
-             <summary>
 
-             Get the number of <see cref="T:Quartz.ICalendar"/> s that are
 
-             stored in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetJobKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.IJob"/> s that
 
-             have the given group name.
 
-             </summary>
 
-             <remarks>
 
-             If there are no jobs in the given group name, the result should be a
 
-             zero-length array (not <see langword="null"/>).
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.CalendarExists(System.String)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.ICalendar"/> with the given identifier already
 
-             exists within the scheduler.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="calName">the identifier to check for</param>
 
-             <returns>true if a calendar exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.CheckExists(Quartz.JobKey)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.IJob"/> with the given identifier already
 
-             exists within the scheduler.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="jobKey">the identifier to check for</param>
 
-             <returns>true if a Job exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.CheckExists(Quartz.TriggerKey)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.ITrigger"/> with the given identifier already
 
-             exists within the scheduler.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="triggerKey">the identifier to check for</param>
 
-             <returns>true if a Trigger exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ClearAllSchedulingData">
 
-             <summary>
 
-             Clear (delete!) all scheduling data - all <see cref="T:Quartz.IJob"/>s, <see cref="T:Quartz.ITrigger"/>s
 
-             <see cref="T:Quartz.ICalendar"/>s.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetTriggerKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.ITrigger"/> s
 
-             that have the given group name.
 
-             </summary>
 
-             <remarks>
 
-             If there are no triggers in the given group name, the result should be a
 
-             zero-length array (not <see langword="null"/>).
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetJobGroupNames">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.IJob"/>
 
-             groups.
 
-             </summary>
 
-             
 
-             <remarks>
 
-             If there are no known group names, the result should be a zero-length
 
-             array (not <see langword="null"/>).
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetTriggerGroupNames">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.ITrigger"/>
 
-             groups.
 
-             </summary>
 
-             
 
-             <remarks>
 
-             If there are no known group names, the result should be a zero-length
 
-             array (not <see langword="null"/>).
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetCalendarNames">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.ICalendar"/> s
 
-             in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </summary>
 
-             <remarks>
 
-             If there are no Calendars in the given group name, the result should be
 
-             a zero-length array (not <see langword="null"/>).
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetTriggersForJob(Quartz.JobKey)">
 
-             <summary>
 
-             Get all of the Triggers that are associated to the given Job.
 
-             </summary>
 
-             <remarks>
 
-             If there are no matches, a zero-length array should be returned.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Pause the <see cref="T:Quartz.ITrigger"/> with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Pause the <see cref="T:Quartz.ITrigger"/> with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseJob(Quartz.JobKey)">
 
-             <summary>
 
-             Pause the <see cref="T:Quartz.IJob"/> with the given name - by
 
-             pausing all of its current <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeJob(Quartz.JobKey)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.IJob"/>s in the given
 
-             group - by pausing all of their <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.CheckBlockedState(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.JobKey,System.String)">
 
-             <summary>
 
-             Determines if a Trigger for the given job should be blocked.  
 
-             State can only transition to StatePausedBlocked/StateBlocked from 
 
-             StatePaused/StateWaiting respectively.
 
-             </summary>
 
-             <returns>StatePausedBlocked, StateBlocked, or the currentState. </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeTrigger(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.TriggerKey)">
 
-             <summary>
 
-             Resume (un-pause) the <see cref="T:Quartz.ITrigger"/> with the
 
-             given name.
 
-             </summary>
 
-             <remarks>
 
-             If the <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeJob(Quartz.JobKey)">
 
-             <summary>
 
-             Resume (un-pause) the <see cref="T:Quartz.IJob"/> with the
 
-             given name.
 
-             </summary>
 
-             <remarks>
 
-             If any of the <see cref="T:Quartz.IJob"/>'s <see cref="T:Quartz.ITrigger"/> s missed one
 
-             or more fire-times, then the <see cref="T:Quartz.ITrigger"/>'s misfire
 
-             instruction will be applied.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseJob(Quartz.JobKey)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Resume (un-pause) all of the <see cref="T:Quartz.IJob"/>s in
 
-             the given group.
 
-             </summary>
 
-             <remarks>
 
-             If any of the <see cref="T:Quartz.IJob"/> s had <see cref="T:Quartz.ITrigger"/> s that
 
-             missed one or more fire-times, then the <see cref="T:Quartz.ITrigger"/>'s
 
-             misfire instruction will be applied.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.ITrigger"/>s in the given group.
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseTriggerGroup(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.ITrigger"/>s in the given group.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetPausedTriggerGroups(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary> 
 
-             Pause all of the <see cref="T:Quartz.ITrigger"/>s in the
 
-             given group.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeTriggers(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Resume (un-pause) all of the <see cref="T:Quartz.ITrigger"/>s
 
-             in the given group.
 
-             <para>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseAll(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Pause all triggers - equivalent of calling <see cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             on every group.
 
-             <para>
 
-             When <see cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeAll"/> is called (to un-pause), trigger misfire
 
-             instructions WILL be applied.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeAll"/>
 
-             <seealso cref="T:System.String"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeAll">
 
-             <summary>
 
-             Resume (un-pause) all triggers - equivalent of calling <see cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             on every group.
 
-             </summary>
 
-             <remarks>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseAll"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeAll(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Resume (un-pause) all triggers - equivalent of calling <see cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             on every group.
 
-             <para>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.PauseAll"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.AcquireNextTriggers(System.DateTimeOffset,System.Int32,System.TimeSpan)">
 
-             <summary>
 
-             Get a handle to the next N triggers to be fired, and mark them as 'reserved'
 
-             by the calling scheduler.
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ReleaseAcquiredTrigger(Quartz.Spi.IOperableTrigger)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ReleaseAcquiredTrigger(Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> that the scheduler no longer plans to
 
-             fire the given <see cref="T:Quartz.ITrigger"/>, that it had previously acquired
 
-             (reserved).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.TriggeredJobComplete(Quartz.Spi.IOperableTrigger,Quartz.IJobDetail,Quartz.SchedulerInstruction)">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> that the scheduler has completed the
 
-             firing of the given <see cref="T:Quartz.ITrigger"/> (and the execution its
 
-             associated <see cref="T:Quartz.IJob"/>), and that the <see cref="T:Quartz.JobDataMap"/>
 
-             in the given <see cref="T:Quartz.IJobDetail"/> should be updated if the <see cref="T:Quartz.IJob"/>
 
-             is stateful.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.FindFailedInstances(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Get a list of all scheduler instances in the cluster that may have failed.
 
-             This includes this scheduler if it is checking in for the first time.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.FindOrphanedFailedInstances(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.Collections.Generic.IList{Quartz.Impl.AdoJobStore.SchedulerStateRecord})">
 
-             <summary>
 
-             Create dummy <see cref="T:Quartz.Impl.AdoJobStore.SchedulerStateRecord"/> objects for fired triggers
 
-             that have no scheduler state record.  Checkin timestamp and interval are
 
-             left as zero on these dummy <see cref="T:Quartz.Impl.AdoJobStore.SchedulerStateRecord"/> objects.
 
-             </summary>
 
-             <param name="conn"></param>
 
-             <param name="schedulerStateRecords">List of all current <see cref="T:Quartz.Impl.AdoJobStore.SchedulerStateRecord"/>s</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.CleanupConnection(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Cleanup the given database connection.  This means restoring
 
-             any modified auto commit or transaction isolation connection
 
-             attributes, and then closing the underlying connection.
 
-             </summary>
 
-             
 
-             <remarks>
 
-             This is separate from closeConnection() because the Spring 
 
-             integration relies on being able to overload closeConnection() and
 
-             expects the same connection back that it originally returned
 
-             from the datasource. 
 
-             </remarks>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.CloseConnection(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.CloseConnection(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary> 
 
-             Closes the supplied connection.
 
-             </summary>
 
-             <param name="cth">(Optional)</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RollbackConnection(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder)">
 
-             <summary>
 
-             Rollback the supplied connection.
 
-             </summary>
 
-             <param name="cth">(Optional)
 
-             </param>
 
-             <throws>  JobPersistenceException thrown if a SQLException occurs when the </throws>
 
-             <summary> connection is rolled back
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.CommitConnection(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.Boolean)">
 
-             <summary>
 
-             Commit the supplied connection.
 
-             </summary>
 
-             <param name="cth">The CTH.</param>
 
-             <param name="openNewTransaction">if set to <c>true</c> opens a new transaction.</param>
 
-             <throws>JobPersistenceException thrown if a SQLException occurs when the </throws>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ExecuteWithoutLock``1(System.Func{Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,``0})">
 
-             <summary>
 
-             Execute the given callback in a transaction. Depending on the JobStore, 
 
-             the surrounding transaction may be assumed to be already present 
 
-             (managed).  
 
-             </summary>
 
-             <remarks>
 
-             This method just forwards to ExecuteInLock() with a null lockName.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ExecuteInLock``1(System.String,System.Func{Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,``0})">
 
-             <summary>
 
-             Execute the given callback having acquired the given lock.  
 
-             Depending on the JobStore, the surrounding transaction may be 
 
-             assumed to be already present (managed).
 
-             </summary> 
 
-             <param name="lockName">
 
-             The name of the lock to acquire, for example 
 
-             "TRIGGER_ACCESS".  If null, then no lock is acquired, but the
 
-             lockCallback is still executed in a transaction. 
 
-             </param>
 
-             <param name="txCallback">
 
-             The callback to execute after having acquired the given lock.
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ExecuteInNonManagedTXLock``1(System.String,System.Func{Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,``0},System.Func{Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,``0,System.Boolean})">
 
-             <summary>
 
-             Execute the given callback having optionally acquired the given lock.
 
-             This uses the non-managed transaction connection.
 
-             </summary>
 
-             <param name="lockName">
 
-             The name of the lock to acquire, for example 
 
-             "TRIGGER_ACCESS".  If null, then no lock is acquired, but the
 
-             lockCallback is still executed in a non-managed transaction. 
 
-             </param>
 
-             <param name="txCallback">
 
-             The callback to execute after having acquired the given lock.
 
-             </param>
 
-             <param name="txValidator"></param>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.DataSource">
 
-             <summary> 
 
-             Get or set the datasource name.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.ConnectionManager">
 
-             <summary> 
 
-             Get or set the database connection manager.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.Log">
 
-             <summary>
 
-             Gets the log.
 
-             </summary>
 
-             <value>The log.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.TablePrefix">
 
-             <summary> 
 
-             Get or sets the prefix that should be pre-pended to all table names.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.UseProperties">
 
-             <summary>
 
-             Set whether string-only properties will be handled in JobDataMaps.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.InstanceId">
 
-             <summary>
 
-             Get or set the instance Id of the Scheduler (must be unique within a cluster).
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.InstanceName">
 
-             <summary>
 
-             Get or set the instance Id of the Scheduler (must be unique within this server instance).
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.RetryableActionErrorLogThreshold">
 
-             <summary>
 
-             Gets or sets the number of retries before an error is logged for recovery operations.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.Clustered">
 
-             <summary> 
 
-             Get or set whether this instance is part of a cluster.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.ClusterCheckinInterval">
 
-             <summary>
 
-             Get or set the frequency at which this instance "checks-in"
 
-             with the other instances of the cluster. -- Affects the rate of
 
-             detecting failed instances.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.MaxMisfiresToHandleAtATime">
 
-             <summary>
 
-             Get or set the maximum number of misfired triggers that the misfire handling
 
-             thread will try to recover at one time (within one transaction).  The
 
-             default is 20.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.DbRetryInterval">
 
-             <summary>
 
-             Gets or sets the database retry interval.
 
-             </summary>
 
-             <value>The db retry interval.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.UseDBLocks">
 
-             <summary>
 
-             Get or set whether this instance should use database-based thread
 
-             synchronization.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.LockOnInsert">
 
-             <summary> 
 
-             Whether or not to obtain locks when inserting new jobs/triggers.  
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             Defaults to <see langword="true" />, which is safest - some db's (such as 
 
-             MS SQLServer) seem to require this to avoid deadlocks under high load,
 
-             while others seem to do fine without.  Settings this to false means 
 
-             isolation guarantees between job scheduling and trigger acquisition are
 
-             entirely enforced by the database.  Depending on the database and it's
 
-             configuration this may cause unusual scheduling behaviors.
 
-             </para>
 
-             <para>
 
-             Setting this property to <see langword="false" /> will provide a 
 
-             significant performance increase during the addition of new jobs 
 
-             and triggers.
 
-             </para>
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.MisfireThreshold">
 
-             <summary> 
 
-             The time span by which a trigger must have missed its
 
-             next-fire-time, in order for it to be considered "misfired" and thus
 
-             have its misfire instruction applied.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.DontSetAutoCommitFalse">
 
-             <summary> 
 
-             Don't call set autocommit(false) on connections obtained from the
 
-             DataSource. This can be helpful in a few situations, such as if you
 
-             have a driver that complains if it is called when it is already off.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.TxIsolationLevelSerializable">
 
-             <summary> 
 
-             Set the transaction isolation level of DB connections to sequential.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.AcquireTriggersWithinLock">
 
-             <summary>
 
-             Whether or not the query and update to acquire a Trigger for firing
 
-             should be performed after obtaining an explicit DB lock (to avoid 
 
-             possible race conditions on the trigger's db row).  This is
 
-             is considered unnecessary for most databases (due to the nature of
 
-              the SQL update that is performed), and therefore a superfluous performance hit.
 
-             </summary>
 
-             <remarks>
 
-             However, if batch acquisition is used, it is important for this behavior 
 
-             to be used for all dbs.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.DriverDelegateType">
 
-             <summary> 
 
-             Get or set the ADO.NET driver delegate class name.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.DriverDelegateInitString">
 
-             <summary>
 
-             The driver delegate's initialization string.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.SelectWithLockSQL">
 
-             <summary>
 
-             set the SQL statement to use to select and lock a row in the "locks"
 
-             table.
 
-             </summary>
 
-             <seealso cref="T:Quartz.Impl.AdoJobStore.StdRowLockSemaphore"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.MakeThreadsDaemons">
 
-             <summary>
 
-             Get whether the threads spawned by this JobStore should be
 
-             marked as daemon.  Possible threads include the <see cref="T:Quartz.Impl.AdoJobStore.JobStoreSupport.MisfireHandler"/> 
 
-             and the <see cref="T:Quartz.Impl.AdoJobStore.JobStoreSupport.ClusterManager"/>.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.DoubleCheckLockMisfireHandler">
 
-             <summary>
 
-             Get whether to check to see if there are Triggers that have misfired
 
-             before actually acquiring the lock to recover them.  This should be 
 
-             set to false if the majority of the time, there are are misfired
 
-             Triggers.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.Delegate">
 
-             <summary>
 
-             Get the driver delegate for DB operations.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.CanUseProperties">
 
-             <summary>
 
-             Get whether String-only properties will be handled in JobDataMaps.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.SupportsPersistence">
 
-             <summary>
 
-             Indicates whether this job store supports persistence.
 
-             </summary>
 
-             <value></value>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Spi.ITypeLoadHelper">
 
-             <summary> 
 
-             An interface for classes wishing to provide the service of loading classes
 
-             and resources within the scheduler...
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ITypeLoadHelper.Initialize">
 
-             <summary> 
 
-             Called to give the ClassLoadHelper a chance to Initialize itself,
 
-             including the opportunity to "steal" the class loader off of the calling
 
-             thread, which is the thread that is initializing Quartz.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ITypeLoadHelper.LoadType(System.String)">
 
-             <summary> 
 
-             Return the class with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ITypeLoadHelper.GetResource(System.String)">
 
-             <summary> 
 
-             Finds a resource with a given name. This method returns null if no
 
-             resource with this name is found.
 
-             </summary>
 
-             <param name="name">name of the desired resource
 
-             </param>
 
-             <returns> a java.net.URL object
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ITypeLoadHelper.GetResourceAsStream(System.String)">
 
-             <summary> 
 
-             Finds a resource with a given name. This method returns null if no
 
-             resource with this name is found.
 
-             </summary>
 
-             <param name="name">name of the desired resource
 
-             </param>
 
-             <returns> a java.io.InputStream object
 
-             </returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.JobStoreSupport.RecoverMisfiredJobsResult">
 
-             <summary>
 
-             Helper class for returning the composite result of trying
 
-             to recover misfired jobs.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreSupport.RecoverMisfiredJobsResult.#ctor(System.Boolean,System.Int32,System.DateTimeOffset)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.JobStoreSupport.RecoverMisfiredJobsResult"/> class.
 
-             </summary>
 
-             <param name="hasMoreMisfiredTriggers">if set to <c>true</c> [has more misfired triggers].</param>
 
-             <param name="processedMisfiredTriggerCount">The processed misfired trigger count.</param>
 
-             <param name="earliestNewTimeUtc"></param>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.RecoverMisfiredJobsResult.HasMoreMisfiredTriggers">
 
-             <summary>
 
-             Gets a value indicating whether this instance has more misfired triggers.
 
-             </summary>
 
-             <value>
 
-             	<c>true</c> if this instance has more misfired triggers; otherwise, <c>false</c>.
 
-             </value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreSupport.RecoverMisfiredJobsResult.ProcessedMisfiredTriggerCount">
 
-             <summary>
 
-             Gets the processed misfired trigger count.
 
-             </summary>
 
-             <value>The processed misfired trigger count.</value>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreCMT.Initialize(Quartz.Spi.ITypeLoadHelper,Quartz.Spi.ISchedulerSignaler)">
 
-             <summary>
 
-             Called by the QuartzScheduler before the <see cref="T:Quartz.Spi.IJobStore"/> is
 
-             used, in order to give the it a chance to Initialize.
 
-             </summary>
 
-             <param name="loadHelper"></param>
 
-             <param name="signaler"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreCMT.Shutdown">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the <see cref="T:Quartz.Spi.IJobStore"/> that
 
-             it should free up all of it's resources because the scheduler is
 
-             shutting down.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreCMT.GetNonManagedTXConnection">
 
-             <summary>
 
-             Gets the non managed TX connection.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreCMT.ExecuteInLock``1(System.String,System.Func{Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,``0})">
 
-             <summary>
 
-             Execute the given callback having optionally acquired the given lock.  
 
-             Because CMT assumes that the connection is already part of a managed
 
-             transaction, it does not attempt to commit or rollback the 
 
-             enclosing transaction.
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ExecuteInNonManagedTXLock(System.String,System.Action{Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder})"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ExecuteInLock(System.String,System.Action{Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder})"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetNonManagedTXConnection"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetConnection"/>
 
-             <param name="lockName">
 
-             The name of the lock to acquire, for example 
 
-             "TRIGGER_ACCESS".  If null, then no lock is acquired, but the
 
-             txCallback is still executed in a transaction.
 
-             </param>
 
-             <param name="txCallback">Callback to execute.</param>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.JobStoreCMT.OpenConnection">
 
-             <summary>
 
-             Instructs this job store whether connections should be automatically opened.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.JobStoreTX">
 
-             <summary>
 
-             <see cref="T:Quartz.Impl.AdoJobStore.JobStoreTX"/> is meant to be used in a standalone environment.
 
-             Both commit and rollback will be handled by this class.
 
-             </summary>
 
-             <author><a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreTX.Initialize(Quartz.Spi.ITypeLoadHelper,Quartz.Spi.ISchedulerSignaler)">
 
-             <summary>
 
-             Called by the QuartzScheduler before the <see cref="T:Quartz.Spi.IJobStore"/> is
 
-             used, in order to give the it a chance to Initialize.
 
-             </summary>
 
-             <param name="loadHelper"></param>
 
-             <param name="signaler"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreTX.GetNonManagedTXConnection">
 
-             <summary>
 
-             For <see cref="T:Quartz.Impl.AdoJobStore.JobStoreTX"/>, the non-managed TX connection is just 
 
-             the normal connection because it is not CMT.
 
-             </summary> 
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetConnection"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.JobStoreTX.ExecuteInLock``1(System.String,System.Func{Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,``0})">
 
-             <summary>
 
-             Execute the given callback having optionally acquired the given lock.
 
-             For <see cref="T:Quartz.Impl.AdoJobStore.JobStoreTX"/>, because it manages its own transactions
 
-             and only has the one datasource, this is the same behavior as 
 
-             <see cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ExecuteInNonManagedTXLock(System.String,System.Action{Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder})"/>.
 
-             </summary>
 
-             <param name="lockName">
 
-             The name of the lock to acquire, for example "TRIGGER_ACCESS". 
 
-             If null, then no lock is acquired, but the lockCallback is still
 
-             executed in a transaction.
 
-             </param>
 
-             <param name="txCallback">Callback to execute.</param>
 
-             <returns></returns>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.ExecuteInNonManagedTXLock(System.String,System.Action{Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder})"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreCMT.ExecuteInLock``1(System.String,System.Func{Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,``0})"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetNonManagedTXConnection"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.JobStoreSupport.GetConnection"/>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.LockException">
 
-             <summary>
 
-             Exception class for when there is a failure obtaining or releasing a
 
-             resource lock.
 
-             </summary>
 
-             <seealso cref="T:Quartz.Impl.AdoJobStore.ISemaphore"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.JobPersistenceException">
 
-             <summary>
 
-             An exception that is thrown to indicate that there has been a failure in the
 
-             scheduler's underlying persistence mechanism.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.JobPersistenceException.#ctor(System.String)">
 
-             <summary> <para>
 
-             Create a <see cref="T:Quartz.JobPersistenceException"/> with the given message.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobPersistenceException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.JobPersistenceException"/> class.
 
-             </summary>
 
-             <param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"></see> that holds the serialized object data about the exception being thrown.</param>
 
-             <param name="context">The <see cref="T:System.Runtime.Serialization.StreamingContext"></see> that contains contextual information about the source or destination.</param>
 
-             <exception cref="T:System.Runtime.Serialization.SerializationException">The class name is null or <see cref="P:System.Exception.HResult"></see> is zero (0). </exception>
 
-             <exception cref="T:System.ArgumentNullException">The info parameter is null. </exception>
 
-         </member>
 
-         <member name="M:Quartz.JobPersistenceException.#ctor(System.String,System.Exception)">
 
-             <summary> <para>
 
-             Create a <see cref="T:Quartz.JobPersistenceException"/> with the given message
 
-             and cause.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.LockException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.LockException"/> class.
 
-             </summary>
 
-             <param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"></see> that holds the serialized object data about the exception being thrown.</param>
 
-             <param name="context">The <see cref="T:System.Runtime.Serialization.StreamingContext"></see> that contains contextual information about the source or destination.</param>
 
-             <exception cref="T:System.Runtime.Serialization.SerializationException">The class name is null or <see cref="P:System.Exception.HResult"></see> is zero (0). </exception>
 
-             <exception cref="T:System.ArgumentNullException">The info parameter is null. </exception>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.MySQLDelegate">
 
-             <summary>
 
-             This is a driver delegate for the MySQL ADO.NET driver.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.MySQLDelegate.GetSelectNextTriggerToAcquireSql(System.Int32)">
 
-             <summary>
 
-             Gets the select next trigger to acquire SQL clause.
 
-             MySQL version with LIMIT support.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.NoSuchDelegateException">
 
-             <summary>
 
-             Exception class for when a driver delegate cannot be found for a given
 
-             configuration, or lack thereof.
 
-             </summary>
 
-             <author><a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.NoSuchDelegateException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.NoSuchDelegateException"/> class.
 
-             </summary>
 
-             <param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"></see> that holds the serialized object data about the exception being thrown.</param>
 
-             <param name="context">The <see cref="T:System.Runtime.Serialization.StreamingContext"></see> that contains contextual information about the source or destination.</param>
 
-             <exception cref="T:System.Runtime.Serialization.SerializationException">The class name is null or <see cref="P:System.Exception.HResult"></see> is zero (0). </exception>
 
-             <exception cref="T:System.ArgumentNullException">The info parameter is null. </exception>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.OracleDelegate">
 
-             <summary>
 
-             This is a driver delegate for the Oracle database.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.OracleDelegate.GetSelectNextTriggerToAcquireSql(System.Int32)">
 
-             <summary>
 
-             Creates the SQL for select next trigger to acquire.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.OracleDelegate.GetDbBooleanValue(System.Boolean)">
 
-             <summary>
 
-             Gets the db presentation for boolean value. For Oracle we use true/false of "1"/"0".
 
-             </summary>
 
-             <param name="booleanValue">Value to map to database.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.SchedulerStateRecord">
 
-             <summary>
 
-             Conveys a scheduler-instance state record.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.SchedulerStateRecord.CheckinInterval">
 
-             <summary>
 
-             Gets or sets the checkin interval.
 
-             </summary>
 
-             <value>The checkin interval.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.SchedulerStateRecord.CheckinTimestamp">
 
-             <summary>
 
-             Gets or sets the checkin timestamp.
 
-             </summary>
 
-             <value>The checkin timestamp.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.SchedulerStateRecord.SchedulerInstanceId">
 
-             <summary>
 
-             Gets or sets the scheduler instance id.
 
-             </summary>
 
-             <value>The scheduler instance id.</value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.SimpleSemaphore">
 
-             <summary> 
 
-             Internal in-memory lock handler for providing thread/resource locking in 
 
-             order to protect resources from being altered by multiple threads at the 
 
-             same time.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.SimpleSemaphore.ObtainLock(Quartz.Impl.AdoJobStore.Common.DbMetadata,Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)">
 
-             <summary> 
 
-             Grants a lock on the identified resource to the calling thread (blocking
 
-             until it is available).
 
-             </summary>
 
-             <returns>True if the lock was obtained.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.SimpleSemaphore.ReleaseLock(System.String)">
 
-             <summary> Release the lock on the identified resource if it is held by the calling
 
-             thread.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.SimpleSemaphore.IsLockOwner(System.String)">
 
-             <summary> 
 
-             Determine whether the calling thread owns a lock on the identified
 
-             resource.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.SimpleSemaphore.ThreadLocks">
 
-             <summary>
 
-             Gets the thread locks.
 
-             </summary>
 
-             <value>The thread locks.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.AdoJobStore.SimpleSemaphore.RequiresConnection">
 
-             <summary>
 
-             Whether this Semaphore implementation requires a database connection for
 
-             its lock management operations.
 
-             </summary>
 
-             <value></value>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.SimpleSemaphore.IsLockOwner(System.String)"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.SimpleSemaphore.ObtainLock(Quartz.Impl.AdoJobStore.Common.DbMetadata,Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String)"/>
 
-             <seealso cref="M:Quartz.Impl.AdoJobStore.SimpleSemaphore.ReleaseLock(System.String)"/>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.SQLiteDelegate">
 
-             <summary>
 
-             This is a driver delegate for the SQLiteDelegate ADO.NET driver.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.SQLiteDelegate.GetSelectNextTriggerToAcquireSql(System.Int32)">
 
-             <summary>
 
-             Gets the select next trigger to acquire SQL clause.
 
-             SQLite version with LIMIT support.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.SqlServerDelegate">
 
-             <summary>
 
-             A SQL Server specific driver delegate.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.SqlServerDelegate.GetSelectNextTriggerToAcquireSql(System.Int32)">
 
-             <summary>
 
-             Gets the select next trigger to acquire SQL clause.
 
-             SQL Server specific version with TOP functionality
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.StdRowLockSemaphore">
 
-             <summary> 
 
-             Internal database based lock handler for providing thread/resource locking 
 
-             in order to protect resources from being altered by multiple threads at the 
 
-             same time.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdRowLockSemaphore.#ctor(Quartz.Impl.AdoJobStore.Common.IDbProvider)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.StdRowLockSemaphore"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdRowLockSemaphore.#ctor(System.String,System.String,System.String,Quartz.Impl.AdoJobStore.Common.IDbProvider)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.StdRowLockSemaphore"/> class.
 
-             </summary>
 
-             <param name="tablePrefix">The table prefix.</param>
 
-             <param name="schedName">the scheduler name</param>
 
-             <param name="selectWithLockSQL">The select with lock SQL.</param>
 
-             <param name="dbProvider"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.StdRowLockSemaphore.ExecuteSQL(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String,System.String)">
 
-             <summary>
 
-             Execute the SQL select for update that will lock the proper database row.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.TriggerPropertyBundle">
 
-             <summary>
 
-             Property name and value holder for trigger state data.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.TriggerStatus">
 
-             <summary>
 
-             Object representing a job or trigger key.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.TriggerStatus.#ctor(System.String,System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Construct a new TriggerStatus with the status name and nextFireTime.
 
-             </summary>
 
-             <param name="status">The trigger's status</param>
 
-             <param name="nextFireTime">The next time trigger will fire</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.TriggerStatus.ToString">
 
-             <summary>
 
-             Return the string representation of the TriggerStatus.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.AdoJobStore.UpdateLockRowSemaphore">
 
-             <summary>
 
-             Provide thread/resource locking in order to protect
 
-             resources from being altered by multiple threads at the same time using
 
-             a db row update.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             <b>Note:</b> This Semaphore implementation is useful for databases that do
 
-             not support row locking via "SELECT FOR UPDATE" or SQL Server's type syntax.
 
-             </para>
 
-             <para>
 
-             As of Quartz.NET 2.0 version there is no need to use this implementation for 
 
-             SQL Server databases.
 
-             </para>
 
-             </remarks>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.UpdateLockRowSemaphore.#ctor(Quartz.Impl.AdoJobStore.Common.IDbProvider)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.AdoJobStore.UpdateLockRowSemaphore"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.AdoJobStore.UpdateLockRowSemaphore.ExecuteSQL(Quartz.Impl.AdoJobStore.ConnectionAndTransactionHolder,System.String,System.String,System.String)">
 
-             <summary>
 
-             Execute the SQL that will lock the proper database row.
 
-             </summary>
 
-             <param name="conn"></param>
 
-             <param name="lockName"></param>
 
-             <param name="expandedSQL"></param>
 
-             <param name="expandedInsertSQL"></param>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Calendar.AnnualCalendar">
 
-             <summary>
 
-             This implementation of the Calendar excludes a set of days of the year. You
 
-             may use it to exclude bank holidays which are on the same date every year.
 
-             </summary>
 
-             <seealso cref="T:Quartz.ICalendar"/>
 
-             <seealso cref="T:Quartz.Impl.Calendar.BaseCalendar"/>
 
-             <author>Juergen Donnerstag</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Calendar.BaseCalendar">
 
-             <summary>
 
-             This implementation of the Calendar may be used (you don't have to) as a
 
-             base class for more sophisticated one's. It merely implements the base
 
-             functionality required by each Calendar.
 
-             </summary>
 
-             <remarks>
 
-             Regarded as base functionality is the treatment of base calendars. Base
 
-             calendar allow you to chain (stack) as much calendars as you may need. For
 
-             example to exclude weekends you may use WeeklyCalendar. In order to exclude
 
-             holidays as well you may define a WeeklyCalendar instance to be the base
 
-             calendar for HolidayCalendar instance.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.ICalendar"/> 
 
-             <author>Juergen Donnerstag</author>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.ICalendar">
 
-             <summary> 
 
-             An interface to be implemented by objects that define spaces of time during 
 
-             which an associated <see cref="T:Quartz.ITrigger"/> may (not) fire. Calendars 
 
-             do not define actual fire times, but rather are used to limit a 
 
-             <see cref="T:Quartz.ITrigger"/> from firing on its normal schedule if necessary. Most 
 
-             Calendars include all times by default and allow the user to specify times 
 
-             to exclude. 
 
-             </summary>
 
-             <remarks>
 
-             As such, it is often useful to think of Calendars as being used to <I>exclude</I> a block
 
-             of time - as opposed to <I>include</I> a block of time. (i.e. the 
 
-             schedule "fire every five minutes except on Sundays" could be 
 
-             implemented with a <see cref="T:Quartz.ISimpleTrigger"/> and a 
 
-             <see cref="T:Quartz.Impl.Calendar.WeeklyCalendar"/> which excludes Sundays)
 
-             <para>
 
-             Implementations MUST take care of being properly cloneable and Serializable.
 
-             </para>
 
-             </remarks>
 
-             <author>James House</author>
 
-             <author>Juergen Donnerstag</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.ICalendar.IsTimeIncluded(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine whether the given UTC time  is 'included' by the
 
-             Calendar.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ICalendar.GetNextIncludedTimeUtc(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine the next UTC time that is 'included' by the
 
-             Calendar after the given UTC time.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ICalendar.Description">
 
-             <summary> 
 
-             Gets or sets a description for the <see cref="T:Quartz.ICalendar"/> instance - may be
 
-             useful for remembering/displaying the purpose of the calendar, though
 
-             the description has no meaning to Quartz.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ICalendar.CalendarBase">
 
-             <summary>
 
-             Set a new base calendar or remove the existing one.
 
-             Get the base calendar.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.BaseCalendar.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.Calendar.BaseCalendar"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.BaseCalendar.#ctor(Quartz.ICalendar)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.Calendar.BaseCalendar"/> class.
 
-             </summary>
 
-             <param name="baseCalendar">The base calendar.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.BaseCalendar.#ctor(System.TimeZoneInfo)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.Calendar.BaseCalendar"/> class.
 
-             </summary>
 
-             <param name="timeZone">The time zone.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.BaseCalendar.#ctor(Quartz.ICalendar,System.TimeZoneInfo)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.Calendar.BaseCalendar"/> class.
 
-             </summary>
 
-             <param name="baseCalendar">The base calendar.</param>
 
-             <param name="timeZone">The time zone.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.BaseCalendar.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.BaseCalendar.ArraysEqualElementsOnEqualPlaces(System.Array,System.Array)">
 
-             <summary>
 
-             checks whether two arrays have 
 
-             the same length and 
 
-             for any given place there are equal elements 
 
-             in both arrays
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.BaseCalendar.GetBaseCalendar">
 
-             <summary>
 
-             Get the base calendar. Will be null, if not set.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.BaseCalendar.IsTimeIncluded(System.DateTimeOffset)">
 
-             <summary>
 
-             Check if date/time represented by timeStamp is included. If included
 
-             return true. The implementation of BaseCalendar simply calls the base
 
-             calendars IsTimeIncluded() method if base calendar is set.
 
-             </summary>
 
-             <seealso cref="M:Quartz.ICalendar.IsTimeIncluded(System.DateTimeOffset)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.BaseCalendar.GetNextIncludedTimeUtc(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine the next UTC time (in milliseconds) that is 'included' by the
 
-             Calendar after the given time. Return the original value if timeStamp is
 
-             included. Return 0 if all days are excluded.
 
-             </summary>
 
-             <seealso cref="M:Quartz.ICalendar.GetNextIncludedTimeUtc(System.DateTimeOffset)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.BaseCalendar.Clone">
 
-             <summary>
 
-             Creates a new object that is a copy of the current instance.
 
-             </summary>
 
-             <returns>A new object that is a copy of this instance.</returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Calendar.BaseCalendar.TimeZone">
 
-             <summary>
 
-             Gets or sets the time zone.
 
-             </summary>
 
-             <value>The time zone.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Calendar.BaseCalendar.Description">
 
-             <summary> 
 
-             Gets or sets the description given to the <see cref="T:Quartz.ICalendar"/> instance by
 
-             its creator (if any).
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Calendar.BaseCalendar.CalendarBase">
 
-             <summary>
 
-             Set a new base calendar or remove the existing one
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.AnnualCalendar.#ctor">
 
-             <summary>
 
-             Constructor
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.AnnualCalendar.#ctor(Quartz.ICalendar)">
 
-             <summary>
 
-             Constructor
 
-             </summary>
 
-             <param name="baseCalendar">The base calendar.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.AnnualCalendar.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.AnnualCalendar.IsDayExcluded(System.DateTimeOffset)">
 
-             <summary>
 
-             Return true, if day is defined to be excluded.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.AnnualCalendar.SetDayExcluded(System.DateTimeOffset,System.Boolean)">
 
-             <summary>
 
-             Redefine a certain day to be excluded (true) or included (false).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.AnnualCalendar.IsTimeIncluded(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine whether the given UTC time (in milliseconds) is 'included' by the
 
-             Calendar.
 
-             <para>
 
-             Note that this Calendar is only has full-day precision.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.AnnualCalendar.GetNextIncludedTimeUtc(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine the next UTC time (in milliseconds) that is 'included' by the
 
-             Calendar after the given time. Return the original value if timeStampUtc is
 
-             included. Return 0 if all days are excluded.
 
-             <para>
 
-             Note that this Calendar is only has full-day precision.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Calendar.AnnualCalendar.DaysExcluded">
 
-             <summary> 
 
-             Get or the array which defines the exclude-value of each day of month.
 
-             Setting will redefine the array of days excluded. The array must of size greater or
 
-             equal 31.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Calendar.CronCalendar">
 
-             <summary>
 
-             This implementation of the Calendar excludes the set of times expressed by a
 
-             given CronExpression. 
 
-             </summary>
 
-             <remarks>
 
-             For example, you could use this calendar to exclude all but business hours (8AM - 5PM) every 
 
-             day using the expression "* * 0-7,18-23 ? * *". 
 
-             <para>
 
-             It is important to remember that the cron expression here describes a set of
 
-             times to be <i>excluded</i> from firing. Whereas the cron expression in 
 
-             CronTrigger describes a set of times that can
 
-             be <i>included</i> for firing. Thus, if a <see cref="T:Quartz.ICronTrigger"/> has a 
 
-             given cron expression and is associated with a <see cref="T:Quartz.Impl.Calendar.CronCalendar"/> with
 
-             the <i>same</i> expression, the calendar will exclude all the times the 
 
-             trigger includes, and they will cancel each other out.
 
-             </para>
 
-             </remarks>
 
-             <author>Aaron Craven</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.CronCalendar.#ctor(System.String)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.Calendar.CronCalendar"/> class.
 
-             </summary>
 
-             <param name="expression">a string representation of the desired cron expression</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.CronCalendar.#ctor(Quartz.ICalendar,System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Calendar.CronCalendar"/> with the given cron expression and 
 
-             <see cref="T:Quartz.Impl.Calendar.BaseCalendar"/>. 
 
-             </summary>
 
-             <param name="baseCalendar">
 
-             the base calendar for this calendar instance 
 
-             see BaseCalendar for more information on base
 
-             calendar functionality
 
-             </param>
 
-             <param name="expression">a string representation of the desired cron expression</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.CronCalendar.#ctor(Quartz.ICalendar,System.String,System.TimeZoneInfo)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Calendar.CronCalendar"/> with the given cron expression and 
 
-             <see cref="T:Quartz.Impl.Calendar.BaseCalendar"/>. 
 
-             </summary>
 
-             <param name="baseCalendar">
 
-             the base calendar for this calendar instance 
 
-             see BaseCalendar for more information on base
 
-             calendar functionality
 
-             </param>
 
-             <param name="expression">a string representation of the desired cron expression</param>
 
-             <param name="timeZone"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.CronCalendar.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.CronCalendar.IsTimeIncluded(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine whether the given time  is 'included' by the
 
-             Calendar.
 
-             </summary>
 
-             <param name="timeUtc">the time to test</param>
 
-             <returns>a boolean indicating whether the specified time is 'included' by the CronCalendar</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.CronCalendar.GetNextIncludedTimeUtc(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine the next time that is 'included' by the
 
-             Calendar after the given time. Return the original value if timeStamp is
 
-             included. Return 0 if all days are excluded.
 
-             </summary>
 
-             <param name="timeUtc"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.CronCalendar.Clone">
 
-             <summary>
 
-             Creates a new object that is a copy of the current instance.
 
-             </summary>
 
-             <returns>A new object that is a copy of this instance.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.CronCalendar.ToString">
 
-             <summary>
 
-             Returns a <see cref="T:System.String"/> that represents the current <see cref="T:System.Object"/>.
 
-             </summary>
 
-             <returns>
 
-             A <see cref="T:System.String"/> that represents the current <see cref="T:System.Object"/>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.CronCalendar.SetCronExpressionString(System.String)">
 
-             <summary>
 
-             Sets the cron expression for the calendar to a new value.
 
-             </summary>
 
-             <param name="expression">The expression.</param>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Calendar.CronCalendar.CronExpression">
 
-             <summary>
 
-              Returns the object representation of the cron expression that defines the
 
-             dates and times this calendar excludes.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Calendar.DailyCalendar">
 
-             <summary>
 
-             This implementation of the Calendar excludes (or includes - see below) a
 
-             specified time range each day. 
 
-             </summary>
 
-             <remarks>
 
-             For example, you could use this calendar to
 
-             exclude business hours (8AM - 5PM) every day. Each <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/>
 
-             only allows a single time range to be specified, and that time range may not
 
-             * cross daily boundaries (i.e. you cannot specify a time range from 8PM - 5AM).
 
-             If the property <see cref="F:Quartz.Impl.Calendar.DailyCalendar.invertTimeRange"/> is <see langword="false"/> (default),
 
-             the time range defines a range of times in which triggers are not allowed to
 
-             * fire. If <see cref="F:Quartz.Impl.Calendar.DailyCalendar.invertTimeRange"/> is <see langword="true"/>, the time range
 
-             is inverted: that is, all times <i>outside</i> the defined time range
 
-             are excluded.
 
-             <para>
 
-             Note when using <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/>, it behaves on the same principals
 
-             as, for example, WeeklyCalendar defines a set of days that are
 
-             excluded <i>every week</i>. Likewise, <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> defines a
 
-             set of times that are excluded <i>every day</i>.
 
-             </para>
 
-             </remarks>
 
-             <author>Mike Funk</author>
 
-             <author>Aaron Craven</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.#ctor(System.String,System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> with a time range defined by the
 
-             specified strings and no baseCalendar. 
 
-             <paramref name="rangeStartingTime"/> and <paramref name="rangeEndingTime"/>
 
-             must be in the format "HH:MM[:SS[:mmm]]" where:
 
-             <ul>
 
-                 <li>
 
-                     HH is the hour of the specified time. The hour should be
 
-                      specified using military (24-hour) time and must be in the range
 
-                      0 to 23.
 
-                 </li>
 
-                 <li>
 
-                     MM is the minute of the specified time and must be in the range
 
-                     0 to 59.
 
-                 </li>
 
-                 <li>
 
-                     SS is the second of the specified time and must be in the range
 
-                     0 to 59.
 
-                 </li>
 
-                 <li>
 
-                     mmm is the millisecond of the specified time and must be in the
 
-                     range 0 to 999.
 
-                 </li>
 
-                 <li>items enclosed in brackets ('[', ']') are optional.</li>
 
-                 <li>
 
-                     The time range starting time must be before the time range ending
 
-                     time. Note this means that a time range may not cross daily 
 
-                     boundaries (10PM - 2AM)
 
-                 </li>  
 
-             </ul>
 
-             </summary>
 
-             <param name="rangeStartingTime">The range starting time in millis.</param>
 
-             <param name="rangeEndingTime">The range ending time in millis.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.#ctor(Quartz.ICalendar,System.String,System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> with a time range defined by the
 
-             specified strings and the specified baseCalendar.
 
-             <paramref name="rangeStartingTime"/> and <paramref name="rangeEndingTime"/>
 
-             must be in the format "HH:MM[:SS[:mmm]]" where:
 
-             <ul>
 
-             		<li>
 
-             HH is the hour of the specified time. The hour should be
 
-             specified using military (24-hour) time and must be in the range
 
-             0 to 23.
 
-             </li>
 
-             		<li>
 
-             MM is the minute of the specified time and must be in the range
 
-             0 to 59.
 
-             </li>
 
-             		<li>
 
-             SS is the second of the specified time and must be in the range
 
-             0 to 59.
 
-             </li>
 
-             		<li>
 
-             mmm is the millisecond of the specified time and must be in the
 
-             range 0 to 999.
 
-             </li>
 
-             		<li>
 
-             items enclosed in brackets ('[', ']') are optional.
 
-             </li>
 
-             		<li>
 
-             The time range starting time must be before the time range ending
 
-             time. Note this means that a time range may not cross daily
 
-             boundaries (10PM - 2AM)
 
-             </li>
 
-             	</ul>
 
-             </summary>
 
-             <param name="baseCalendar">The base calendar for this calendar instance see BaseCalendar for more
 
-             information on base calendar functionality.</param>
 
-             <param name="rangeStartingTime">The range starting time in millis.</param>
 
-             <param name="rangeEndingTime">The range ending time in millis.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.#ctor(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> with a time range defined by the
 
-             specified values and no baseCalendar. Values are subject to
 
-             the following validations:
 
-             <ul>
 
-                 <li>
 
-                     Hours must be in the range 0-23 and are expressed using military
 
-             	    (24-hour) time.
 
-                 </li>
 
-             	<li>Minutes must be in the range 0-59</li>
 
-             	<li>Seconds must be in the range 0-59</li>
 
-             	<li>Milliseconds must be in the range 0-999</li>
 
-             	<li>
 
-                     The time range starting time must be before the time range ending
 
-             	    time. Note this means that a time range may not cross daily 
 
-             	    boundaries (10PM - 2AM)
 
-                 </li>  
 
-             </ul>
 
-             </summary>
 
-             <param name="rangeStartingHourOfDay">The range starting hour of day.</param>
 
-             <param name="rangeStartingMinute">The range starting minute.</param>
 
-             <param name="rangeStartingSecond">The range starting second.</param>
 
-             <param name="rangeStartingMillis">The range starting millis.</param>
 
-             <param name="rangeEndingHourOfDay">The range ending hour of day.</param>
 
-             <param name="rangeEndingMinute">The range ending minute.</param>
 
-             <param name="rangeEndingSecond">The range ending second.</param>
 
-             <param name="rangeEndingMillis">The range ending millis.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.#ctor(Quartz.ICalendar,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> with a time range defined by the
 
-             specified values and the specified <paramref name="baseCalendar"/>. Values are
 
-             subject to the following validations:
 
-             <ul>
 
-             		<li>
 
-             Hours must be in the range 0-23 and are expressed using military
 
-             (24-hour) time.
 
-             </li>
 
-             		<li>Minutes must be in the range 0-59</li>
 
-             		<li>Seconds must be in the range 0-59</li>
 
-             		<li>Milliseconds must be in the range 0-999</li>
 
-             		<li>
 
-             The time range starting time must be before the time range ending
 
-             time. Note this means that a time range may not cross daily
 
-             boundaries (10PM - 2AM)
 
-             </li>
 
-             	</ul>
 
-             </summary>
 
-             <param name="baseCalendar">The base calendar for this calendar instance see BaseCalendar for more
 
-             information on base calendar functionality.</param>
 
-             <param name="rangeStartingHourOfDay">The range starting hour of day.</param>
 
-             <param name="rangeStartingMinute">The range starting minute.</param>
 
-             <param name="rangeStartingSecond">The range starting second.</param>
 
-             <param name="rangeStartingMillis">The range starting millis.</param>
 
-             <param name="rangeEndingHourOfDay">The range ending hour of day.</param>
 
-             <param name="rangeEndingMinute">The range ending minute.</param>
 
-             <param name="rangeEndingSecond">The range ending second.</param>
 
-             <param name="rangeEndingMillis">The range ending millis.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.#ctor(System.DateTime,System.DateTime)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> with a time range defined by the
 
-             specified <see cref="T:System.DateTime"/>s and no 
 
-             baseCalendar. The Calendars are subject to the following
 
-             considerations:
 
-             <ul>
 
-                 <li>
 
-                     Only the time-of-day fields of the specified Calendars will be
 
-             	    used (the date fields will be ignored)
 
-                 </li>
 
-             	<li>
 
-                     The starting time must be before the ending time of the defined
 
-             	    time range. Note this means that a time range may not cross
 
-             	    daily boundaries (10PM - 2AM). <i>(because only time fields are
 
-             	    are used, it is possible for two Calendars to represent a valid
 
-             	    time range and 
 
-             	    <c>rangeStartingCalendar.after(rangeEndingCalendar) ==  true</c>)
 
-             		</i>
 
-                 </li>  
 
-             </ul> 
 
-             </summary>
 
-             <param name="rangeStartingCalendarUtc">The range starting calendar.</param>
 
-             <param name="rangeEndingCalendarUtc">The range ending calendar.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.#ctor(Quartz.ICalendar,System.DateTime,System.DateTime)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> with a time range defined by the
 
-             specified <see cref="T:System.DateTime"/>s and the specified
 
-             <paramref name="baseCalendar"/>. The Calendars are subject to the following
 
-             considerations:
 
-             <ul>
 
-             		<li>
 
-             Only the time-of-day fields of the specified Calendars will be
 
-             used (the date fields will be ignored)
 
-             </li>
 
-             		<li>
 
-             The starting time must be before the ending time of the defined
 
-             time range. Note this means that a time range may not cross
 
-             daily boundaries (10PM - 2AM). <i>(because only time fields are
 
-             are used, it is possible for two Calendars to represent a valid
 
-             time range and
 
-             <c>rangeStartingCalendarUtc > rangeEndingCalendarUtc == true</c>)</i>
 
-             		</li>
 
-             	</ul>
 
-             </summary>
 
-             <param name="baseCalendar">The base calendar for this calendar instance see BaseCalendar for more
 
-             information on base calendar functionality.</param>
 
-             <param name="rangeStartingCalendarUtc">The range starting calendar.</param>
 
-             <param name="rangeEndingCalendarUtc">The range ending calendar.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.#ctor(System.Int64,System.Int64)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> with a time range defined by the
 
-             specified values and no baseCalendar. The values are 
 
-             subject to the following considerations:
 
-             <ul>
 
-                 <li>
 
-                     Only the time-of-day portion of the specified values will be
 
-             	    used
 
-                 </li>
 
-             	<li>
 
-                     The starting time must be before the ending time of the defined
 
-             	    time range. Note this means that a time range may not cross
 
-             	    daily boundaries (10PM - 2AM). <i>(because only time value are
 
-             	    are used, it is possible for the two values to represent a valid
 
-             	    time range and <c>rangeStartingTime > rangeEndingTime</c>)</i>
 
-                 </li>  
 
-             </ul> 
 
-             </summary>
 
-             <param name="rangeStartingTimeInMillis">The range starting time in millis.</param>
 
-             <param name="rangeEndingTimeInMillis">The range ending time in millis.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.#ctor(Quartz.ICalendar,System.Int64,System.Int64)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> with a time range defined by the
 
-             specified values and the specified <paramref name="baseCalendar"/>. The values
 
-             are subject to the following considerations:
 
-             <ul>
 
-             		<li>
 
-             Only the time-of-day portion of the specified values will be
 
-             used
 
-             </li>
 
-             		<li>
 
-             The starting time must be before the ending time of the defined
 
-             time range. Note this means that a time range may not cross
 
-             daily boundaries (10PM - 2AM). <i>(because only time value are
 
-             are used, it is possible for the two values to represent a valid
 
-             time range and <c>rangeStartingTime > rangeEndingTime</c>)</i>
 
-             		</li>
 
-             	</ul>
 
-             </summary>
 
-             <param name="baseCalendar">The base calendar for this calendar instance see BaseCalendar for more
 
-             information on base calendar functionality.</param>
 
-             <param name="rangeStartingTimeInMillis">The range starting time in millis.</param>
 
-             <param name="rangeEndingTimeInMillis">The range ending time in millis.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.IsTimeIncluded(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine whether the given time  is 'included' by the
 
-             Calendar.
 
-             </summary>
 
-             <param name="timeUtc"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.GetNextIncludedTimeUtc(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine the next time (in milliseconds) that is 'included' by the
 
-             Calendar after the given time. Return the original value if timeStamp is
 
-             included. Return 0 if all days are excluded.
 
-             </summary>
 
-             <param name="timeUtc"></param>
 
-             <returns></returns>
 
-             <seealso cref="M:Quartz.ICalendar.GetNextIncludedTimeUtc(System.DateTimeOffset)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.GetTimeRangeStartingTimeUtc(System.DateTimeOffset)">
 
-             <summary>
 
-             Returns the start time of the time range of the day 
 
-             specified in <paramref name="timeUtc" />.
 
-             </summary>
 
-             <returns>
 
-                 a DateTime representing the start time of the
 
-                 time range for the specified date.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.GetTimeRangeEndingTimeUtc(System.DateTimeOffset)">
 
-             <summary>
 
-             Returns the end time of the time range of the day
 
-             specified in <paramref name="timeUtc" />
 
-             </summary>
 
-             <returns>
 
-             A DateTime representing the end time of the
 
-             time range for the specified date.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.ToString">
 
-             <summary>
 
-             Returns a <see cref="T:System.String"></see> that represents the current <see cref="T:System.Object"></see>.
 
-             </summary>
 
-             <returns>
 
-             A <see cref="T:System.String"></see> that represents the current <see cref="T:System.Object"></see>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.SetTimeRange(System.String,System.String)">
 
-             <summary>
 
-             Sets the time range for the <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> to the times 
 
-             represented in the specified Strings. 
 
-             </summary>
 
-             <param name="rangeStartingTimeString">The range starting time string.</param>
 
-             <param name="rangeEndingTimeString">The range ending time string.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.SetTimeRange(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Sets the time range for the <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> to the times
 
-             represented in the specified values. 
 
-             </summary>
 
-             <param name="rangeStartingHourOfDay">The range starting hour of day.</param>
 
-             <param name="rangeStartingMinute">The range starting minute.</param>
 
-             <param name="rangeStartingSecond">The range starting second.</param>
 
-             <param name="rangeStartingMillis">The range starting millis.</param>
 
-             <param name="rangeEndingHourOfDay">The range ending hour of day.</param>
 
-             <param name="rangeEndingMinute">The range ending minute.</param>
 
-             <param name="rangeEndingSecond">The range ending second.</param>
 
-             <param name="rangeEndingMillis">The range ending millis.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.SetTimeRange(System.DateTime,System.DateTime)">
 
-             <summary>
 
-             Sets the time range for the <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> to the times
 
-             represented in the specified <see cref="T:System.DateTime"/>s. 
 
-             </summary>
 
-             <param name="rangeStartingCalendarUtc">The range starting calendar.</param>
 
-             <param name="rangeEndingCalendarUtc">The range ending calendar.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.SetTimeRange(System.Int64,System.Int64)">
 
-             <summary>
 
-             Sets the time range for the <see cref="T:Quartz.Impl.Calendar.DailyCalendar"/> to the times
 
-             represented in the specified values. 
 
-             </summary>
 
-             <param name="rangeStartingTime">The range starting time.</param>
 
-             <param name="rangeEndingTime">The range ending time.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.GetStartOfDay(System.DateTimeOffset)">
 
-             <summary>
 
-             Gets the start of day, practically zeroes time part.
 
-             </summary>
 
-             <param name="time">The time.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.GetEndOfDay(System.DateTimeOffset)">
 
-             <summary>
 
-             Gets the end of day, practically sets time parts to maximum allowed values.
 
-             </summary>
 
-             <param name="time">The time.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.DailyCalendar.Validate(System.Int32,System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Checks the specified values for validity as a set of time values.
 
-             </summary>
 
-             <param name="hourOfDay">The hour of day.</param>
 
-             <param name="minute">The minute.</param>
 
-             <param name="second">The second.</param>
 
-             <param name="millis">The millis.</param>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Calendar.DailyCalendar.InvertTimeRange">
 
-             <summary>
 
-             Indicates whether the time range represents an inverted time range (see
 
-             class description).
 
-             </summary>
 
-             <value><c>true</c> if invert time range; otherwise, <c>false</c>.</value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Calendar.HolidayCalendar">
 
-             <summary>
 
-             This implementation of the Calendar stores a list of holidays (full days
 
-             that are excluded from scheduling).
 
-             </summary>
 
-             <remarks>
 
-             The implementation DOES take the year into consideration, so if you want to
 
-             exclude July 4th for the next 10 years, you need to add 10 entries to the
 
-             exclude list.
 
-             </remarks>
 
-             <author>Sharada Jambula</author>
 
-             <author>Juergen Donnerstag</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.HolidayCalendar.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.Calendar.HolidayCalendar"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.HolidayCalendar.#ctor(Quartz.ICalendar)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.Calendar.HolidayCalendar"/> class.
 
-             </summary>
 
-             <param name="baseCalendar">The base calendar.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.HolidayCalendar.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.HolidayCalendar.IsTimeIncluded(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine whether the given time (in milliseconds) is 'included' by the
 
-             Calendar.
 
-             <para>
 
-             Note that this Calendar is only has full-day precision.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.HolidayCalendar.GetNextIncludedTimeUtc(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine the next time (in milliseconds) that is 'included' by the
 
-             Calendar after the given time.
 
-             <para>
 
-             Note that this Calendar is only has full-day precision.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.HolidayCalendar.Clone">
 
-             <summary>
 
-             Creates a new object that is a copy of the current instance.
 
-             </summary>
 
-             <returns>A new object that is a copy of this instance.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.HolidayCalendar.AddExcludedDate(System.DateTime)">
 
-             <summary>
 
-             Add the given Date to the list of excluded days. Only the month, day and
 
-             year of the returned dates are significant.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.HolidayCalendar.RemoveExcludedDate(System.DateTime)">
 
-             <summary>
 
-             Removes the excluded date.
 
-             </summary>
 
-             <param name="dateToRemoveUtc">The date to remove.</param>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Calendar.HolidayCalendar.ExcludedDates">
 
-             <summary>
 
-             Returns a <see cref="T:Quartz.Collection.ISortedSet`1"/> of Dates representing the excluded
 
-             days. Only the month, day and year of the returned dates are
 
-             significant.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Calendar.MonthlyCalendar">
 
-             <summary>
 
-             This implementation of the Calendar excludes a set of days of the month. You
 
-             may use it to exclude every 1. of each month for example. But you may define
 
-             any day of a month.
 
-             </summary>
 
-             <seealso cref="T:Quartz.ICalendar"/>
 
-             <seealso cref="T:Quartz.Impl.Calendar.BaseCalendar"/>
 
-             <author>Juergen Donnerstag</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.MonthlyCalendar.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.Calendar.MonthlyCalendar"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.MonthlyCalendar.#ctor(Quartz.ICalendar)">
 
-             <summary>
 
-             Constructor
 
-             </summary>
 
-             <param name="baseCalendar">The base calendar.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.MonthlyCalendar.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.MonthlyCalendar.Init">
 
-             <summary> 
 
-             Initialize internal variables
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.MonthlyCalendar.IsDayExcluded(System.Int32)">
 
-             <summary>
 
-             Return true, if day is defined to be excluded.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.MonthlyCalendar.SetDayExcluded(System.Int32,System.Boolean)">
 
-             <summary>
 
-             Redefine a certain day of the month to be excluded (true) or included
 
-             (false).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.MonthlyCalendar.AreAllDaysExcluded">
 
-             <summary>
 
-             Check if all days are excluded. That is no day is included.
 
-             </summary>
 
-             <returns> boolean
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.MonthlyCalendar.IsTimeIncluded(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine whether the given time (in milliseconds) is 'included' by the
 
-             Calendar.
 
-             <para>
 
-             Note that this Calendar is only has full-day precision.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.MonthlyCalendar.GetNextIncludedTimeUtc(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine the next time (in milliseconds) that is 'included' by the
 
-             Calendar after the given time. Return the original value if timeStamp is
 
-             included. Return DateTime.MinValue if all days are excluded.
 
-             <para>
 
-             Note that this Calendar is only has full-day precision.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.MonthlyCalendar.Clone">
 
-             <summary>
 
-             Creates a new object that is a copy of the current instance.
 
-             </summary>
 
-             <returns>A new object that is a copy of this instance.</returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Calendar.MonthlyCalendar.DaysExcluded">
 
-             <summary>
 
-             Get or set the array which defines the exclude-value of each day of month
 
-             Setting will redefine the array of days excluded. The array must of size greater or
 
-             equal 31.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Calendar.WeeklyCalendar">
 
-             <summary>
 
-             This implementation of the Calendar excludes a set of days of the week. You
 
-             may use it to exclude weekends for example. But you may define any day of
 
-             the week.
 
-             </summary>
 
-             <seealso cref="T:Quartz.ICalendar"/>
 
-             <seealso cref="T:Quartz.Impl.Calendar.BaseCalendar"/>
 
-             <author>Juergen Donnerstag</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.WeeklyCalendar.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.Calendar.WeeklyCalendar"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.WeeklyCalendar.#ctor(Quartz.ICalendar)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.Calendar.WeeklyCalendar"/> class.
 
-             </summary>
 
-             <param name="baseCalendar">The base calendar.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.WeeklyCalendar.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.WeeklyCalendar.Init">
 
-             <summary>
 
-             Initialize internal variables
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.WeeklyCalendar.IsDayExcluded(System.DayOfWeek)">
 
-             <summary> 
 
-             Return true, if wday is defined to be excluded. E. g.
 
-             saturday and sunday.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.WeeklyCalendar.SetDayExcluded(System.DayOfWeek,System.Boolean)">
 
-             <summary>
 
-             Redefine a certain day of the week to be excluded (true) or included
 
-             (false). Use <see cref="T:System.DayOfWeek"/> enum to determine the weekday.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.WeeklyCalendar.AreAllDaysExcluded">
 
-             <summary>
 
-             Check if all week ays are excluded. That is no day is included.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.WeeklyCalendar.IsTimeIncluded(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine whether the given time (in milliseconds) is 'included' by the
 
-             Calendar.
 
-             <para>
 
-             Note that this Calendar is only has full-day precision.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Calendar.WeeklyCalendar.GetNextIncludedTimeUtc(System.DateTimeOffset)">
 
-             <summary>
 
-             Determine the next time (in milliseconds) that is 'included' by the
 
-             Calendar after the given time. Return the original value if timeStamp is
 
-             included. Return DateTime.MinValue if all days are excluded.
 
-             <para>
 
-             Note that this Calendar is only has full-day precision.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Calendar.WeeklyCalendar.DaysExcluded">
 
-             <summary> 
 
-             Get the array with the week days.
 
-             Setting will redefine the array of days excluded. The array must of size greater or
 
-             equal 8. java.util.Calendar's constants like MONDAY should be used as
 
-             index. A value of true is regarded as: exclude it.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Matchers.AndMatcher`1">
 
-             <summary>
 
-             Matches using an AND operator on two Matcher operands. 
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.IMatcher`1">
 
-             <summary>
 
-             Matchers can be used in various <see cref="T:Quartz.IScheduler"/> API methods to 
 
-             select the entities that should be operated upon.
 
-             </summary>
 
-             <author>James House</author>
 
-             <typeparam name="T"></typeparam>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.AndMatcher`1.And``1(Quartz.IMatcher{``0},Quartz.IMatcher{``0})">
 
-             <summary>
 
-             Create an AndMatcher that depends upon the result of both of the given matchers.
 
-             </summary>
 
-             <typeparam name="T"></typeparam>
 
-             <param name="leftOperand"></param>
 
-             <param name="rightOperand"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Matchers.EverythingMatcher`1">
 
-             <summary>
 
-             Matches on the complete key being equal (both name and group).
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <author>jhouse</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.EverythingMatcher`1.AllJobs">
 
-             <summary>
 
-             Create an EverythingMatcher that matches all jobs.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.EverythingMatcher`1.AllTriggers">
 
-             <summary>
 
-             Create an EverythingMatcher that matches all triggers.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Matchers.GroupMatcher`1">
 
-             <summary>
 
-             Matches on group (ignores name) property of Keys.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Matchers.StringMatcher`1">
 
-             <summary>
 
-             An abstract base class for some types of matchers.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.GroupMatcher`1.GroupEquals(System.String)">
 
-             <summary>
 
-             Create a GroupMatcher that matches groups equaling the given string.
 
-             </summary>
 
-             <param name="compareTo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.GroupMatcher`1.GroupStartsWith(System.String)">
 
-             <summary>
 
-             Create a GroupMatcher that matches groups starting with the given string.
 
-             </summary>
 
-             <param name="compareTo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.GroupMatcher`1.GroupEndsWith(System.String)">
 
-             <summary>
 
-             Create a GroupMatcher that matches groups ending with the given string.
 
-             </summary>
 
-             <param name="compareTo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.GroupMatcher`1.GroupContains(System.String)">
 
-             <summary>
 
-             Create a GroupMatcher that matches groups containing the given string.
 
-             </summary>
 
-             <param name="compareTo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.GroupMatcher`1.AnyGroup">
 
-             <summary>
 
-             Create a GroupMatcher that matches all.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Matchers.KeyMatcher`1">
 
-             <summary>
 
-             Matches on the complete key being equal (both name and group). 
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.KeyMatcher`1.KeyEquals``1(``0)">
 
-             <summary>
 
-             Create a KeyMatcher that matches Keys that equal the given key. 
 
-             </summary>
 
-             <typeparam name="T"></typeparam>
 
-             <param name="compareTo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Matchers.NameMatcher`1">
 
-             <summary>
 
-             Matches on name (ignores group) property of Keys.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.NameMatcher`1.NameEquals(System.String)">
 
-             <summary>
 
-             Create a NameMatcher that matches names equaling the given string.
 
-             </summary>
 
-             <param name="compareTo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.NameMatcher`1.NameStartsWith(System.String)">
 
-             <summary>
 
-             Create a NameMatcher that matches names starting with the given string.
 
-             </summary>
 
-             <param name="compareTo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.NameMatcher`1.NameEndsWith(System.String)">
 
-             <summary>
 
-             Create a NameMatcher that matches names ending with the given string.
 
-             </summary>
 
-             <param name="compareTo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.NameMatcher`1.NameContains(System.String)">
 
-             <summary>
 
-             Create a NameMatcher that matches names containing the given string.
 
-             </summary>
 
-             <param name="compareTo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Matchers.NotMatcher`1">
 
-             <summary>
 
-             Matches using an NOT operator on another Matcher. 
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.NotMatcher`1.Not``1(Quartz.IMatcher{``0})">
 
-             <summary>
 
-             Create a NotMatcher that reverses the result of the given matcher.
 
-             </summary>
 
-             <typeparam name="T"></typeparam>
 
-             <param name="operand"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Matchers.OrMatcher`1">
 
-             <summary>
 
-             Matches using an OR operator on two Matcher operands. 
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Matchers.OrMatcher`1.Or``1(Quartz.IMatcher{``0},Quartz.IMatcher{``0})">
 
-             <summary>
 
-             Create an OrMatcher that depends upon the result of at least one of the given matchers.
 
-             </summary>
 
-             <typeparam name="T"></typeparam>
 
-             <param name="leftOperand"></param>
 
-             <param name="rightOperand"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Matchers.StringOperator">
 
-             <summary>
 
-             Operators available for comparing string values.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Triggers.AbstractTrigger">
 
-             <summary>
 
-             The base abstract class to be extended by all triggers.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             <see cref="T:Quartz.ITrigger"/>s have a name and group associated with them, which
 
-             should uniquely identify them within a single <see cref="T:Quartz.IScheduler"/>.
 
-             </para>
 
-             
 
-             <para>
 
-             <see cref="T:Quartz.ITrigger"/>s are the 'mechanism' by which <see cref="T:Quartz.IJob"/> s
 
-             are scheduled. Many <see cref="T:Quartz.ITrigger"/> s can point to the same <see cref="T:Quartz.IJob"/>,
 
-             but a single <see cref="T:Quartz.ITrigger"/> can only point to one <see cref="T:Quartz.IJob"/>.
 
-             </para>
 
-             
 
-             <para>
 
-             Triggers can 'send' parameters/data to <see cref="T:Quartz.IJob"/>s by placing contents
 
-             into the <see cref="P:Quartz.Impl.Triggers.AbstractTrigger.JobDataMap"/> on the <see cref="T:Quartz.ITrigger"/>.
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.ISimpleTrigger"/>
 
-             <seealso cref="T:Quartz.ICronTrigger"/>
 
-             <seealso cref="T:Quartz.IDailyTimeIntervalTrigger"/>
 
-             <seealso cref="P:Quartz.Impl.Triggers.AbstractTrigger.JobDataMap"/>
 
-             <seealso cref="T:Quartz.IJobExecutionContext"/>
 
-             <author>James House</author>
 
-             <author>Sharada Jambula</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Spi.IOperableTrigger">
 
-             <summary>
 
-             Internal interface for managing triggers. This interface should not be used by the Quartz client.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Spi.IMutableTrigger">
 
-             <summary>
 
-             Should not be used by end users.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.ITrigger">
 
-             <summary>
 
-             The base interface with properties common to all <see cref="T:Quartz.ITrigger"/>s - 
 
-             use <see cref="T:Quartz.TriggerBuilder"/> to instantiate an actual Trigger.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             <see cref="T:Quartz.ITrigger"/>s have a <see cref="T:Quartz.TriggerKey"/> associated with them, which
 
-             should uniquely identify them within a single <see cref="T:Quartz.IScheduler"/>.
 
-             </para>
 
-             
 
-             <para>
 
-             <see cref="T:Quartz.ITrigger"/>s are the 'mechanism' by which <see cref="T:Quartz.IJob"/> s
 
-             are scheduled. Many <see cref="T:Quartz.ITrigger"/> s can point to the same <see cref="T:Quartz.IJob"/>,
 
-             but a single <see cref="T:Quartz.ITrigger"/> can only point to one <see cref="T:Quartz.IJob"/>.
 
-             </para>
 
-             
 
-             <para>
 
-             Triggers can 'send' parameters/data to <see cref="T:Quartz.IJob"/>s by placing contents
 
-             into the <see cref="P:Quartz.ITrigger.JobDataMap"/> on the <see cref="T:Quartz.ITrigger"/>.
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.TriggerBuilder"/>
 
-             <seealso cref="T:Quartz.ICalendarIntervalTrigger"/>
 
-             <seealso cref="T:Quartz.ISimpleTrigger"/>
 
-             <seealso cref="T:Quartz.ICronTrigger"/>
 
-             <seealso cref="T:Quartz.IDailyTimeIntervalTrigger"/>
 
-             <seealso cref="P:Quartz.ITrigger.JobDataMap"/>
 
-             <seealso cref="T:Quartz.IJobExecutionContext"/>
 
-             <author>James House</author>
 
-             <author>Sharada Jambula</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.ITrigger.GetTriggerBuilder">
 
-             <summary>
 
-             Get a <see cref="T:Quartz.TriggerBuilder"/> that is configured to produce a 
 
-             trigger identical to this one.
 
-             </summary>
 
-             <seealso cref="M:Quartz.ITrigger.GetScheduleBuilder"/>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.ITrigger.GetScheduleBuilder">
 
-             <summary>
 
-             Get a <see cref="T:Quartz.IScheduleBuilder"/> that is configured to produce a 
 
-             schedule identical to this trigger's schedule.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.ITrigger.GetMayFireAgain">
 
-             <summary> 
 
-             Used by the <see cref="T:Quartz.IScheduler"/> to determine whether or not
 
-             it is possible for this <see cref="T:Quartz.ITrigger"/> to fire again.
 
-             <para>
 
-             If the returned value is <see langword="false"/> then the <see cref="T:Quartz.IScheduler"/>
 
-             may remove the <see cref="T:Quartz.ITrigger"/> from the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ITrigger.GetNextFireTimeUtc">
 
-              <summary>
 
-              Returns the next time at which the <see cref="T:Quartz.ITrigger"/> is scheduled to fire. If
 
-              the trigger will not fire again, <see langword="null"/> will be returned.  Note that
 
-              the time returned can possibly be in the past, if the time that was computed
 
-              for the trigger to next fire has already arrived, but the scheduler has not yet
 
-              been able to fire the trigger (which would likely be due to lack of resources
 
-              e.g. threads).
 
-              </summary>
 
-             <remarks>
 
-              The value returned is not guaranteed to be valid until after the <see cref="T:Quartz.ITrigger"/>
 
-              has been added to the scheduler.
 
-              </remarks>
 
-              <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.ITrigger.GetPreviousFireTimeUtc">
 
-             <summary>
 
-             Returns the previous time at which the <see cref="T:Quartz.ITrigger"/> fired.
 
-             If the trigger has not yet fired, <see langword="null"/> will be returned.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ITrigger.GetFireTimeAfter(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Returns the next time at which the <see cref="T:Quartz.ITrigger"/> will fire,
 
-             after the given time. If the trigger will not fire after the given time,
 
-             <see langword="null"/> will be returned.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ITrigger.Description">
 
-             <summary>
 
-             Get or set the description given to the <see cref="T:Quartz.ITrigger"/> instance by
 
-             its creator (if any).
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ITrigger.CalendarName">
 
-             <summary>
 
-             Get or set  the <see cref="T:Quartz.ICalendar"/> with the given name with
 
-             this Trigger. Use <see langword="null"/> when setting to dis-associate a Calendar.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ITrigger.JobDataMap">
 
-             <summary>
 
-             Get or set the <see cref="P:Quartz.ITrigger.JobDataMap"/> that is associated with the 
 
-             <see cref="T:Quartz.ITrigger"/>.
 
-             <para>
 
-             Changes made to this map during job execution are not re-persisted, and
 
-             in fact typically result in an illegal state.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ITrigger.FinalFireTimeUtc">
 
-             <summary>
 
-             Returns the last UTC time at which the <see cref="T:Quartz.ITrigger"/> will fire, if
 
-             the Trigger will repeat indefinitely, null will be returned.
 
-             <para>
 
-             Note that the return time *may* be in the past.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ITrigger.MisfireInstruction">
 
-             <summary>
 
-             Get or set the instruction the <see cref="T:Quartz.IScheduler"/> should be given for
 
-             handling misfire situations for this <see cref="T:Quartz.ITrigger"/>- the
 
-             concrete <see cref="T:Quartz.ITrigger"/> type that you are using will have
 
-             defined a set of additional MISFIRE_INSTRUCTION_XXX
 
-             constants that may be set to this property.
 
-             <para>
 
-             If not explicitly set, the default value is <see cref="F:Quartz.MisfireInstruction.InstructionNotSet"/>.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="F:Quartz.MisfireInstruction.InstructionNotSet"/>
 
-             <seealso cref="T:Quartz.ISimpleTrigger"/>
 
-             <seealso cref="T:Quartz.ICronTrigger"/>
 
-         </member>
 
-         <member name="P:Quartz.ITrigger.EndTimeUtc">
 
-             <summary>
 
-             Gets and sets the date/time on which the trigger must stop firing. This 
 
-             defines the final boundary for trigger firings 舒 the trigger will
 
-             not fire after to this date and time. If this value is null, no end time
 
-             boundary is assumed, and the trigger can continue indefinitely.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ITrigger.StartTimeUtc">
 
-             <summary>
 
-             The time at which the trigger's scheduling should start.  May or may not
 
-             be the first actual fire time of the trigger, depending upon the type of
 
-             trigger and the settings of the other properties of the trigger.  However
 
-             the first actual first time will not be before this date.
 
-             </summary>
 
-             <remarks>
 
-             Setting a value in the past may cause a new trigger to compute a first
 
-             fire time that is in the past, which may cause an immediate misfire
 
-             of the trigger.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.ITrigger.Priority">
 
-             <summary>
 
-             The priority of a <see cref="T:Quartz.ITrigger"/> acts as a tie breaker such that if 
 
-             two <see cref="T:Quartz.ITrigger"/>s have the same scheduled fire time, then Quartz
 
-             will do its best to give the one with the higher priority first access 
 
-             to a worker thread.
 
-             </summary>
 
-             <remarks>
 
-             If not explicitly set, the default value is <i>5</i>.
 
-             </remarks>
 
-             <returns></returns>
 
-             <see cref="F:Quartz.TriggerConstants.DefaultPriority"/>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IMutableTrigger.Description">
 
-             <summary>
 
-             Set a description for the <see cref="T:Quartz.ITrigger"/> instance - may be
 
-             useful for remembering/displaying the purpose of the trigger, though the
 
-             description has no meaning to Quartz.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IMutableTrigger.CalendarName">
 
-             <summary>
 
-             Associate the <see cref="T:Quartz.ICalendar"/> with the given name with this Trigger.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IMutableTrigger.JobDataMap">
 
-             <summary>
 
-             Set the <see cref="P:Quartz.Spi.IMutableTrigger.JobDataMap"/> to be associated with the
 
-             <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IMutableTrigger.Priority">
 
-             <summary>
 
-             The priority of a <see cref="T:Quartz.ITrigger"/> acts as a tie breaker such that if
 
-             two <see cref="T:Quartz.ITrigger"/>s have the same scheduled fire time, then Quartz
 
-             will do its best to give the one with the higher priority first access
 
-             to a worker thread.
 
-             </summary>
 
-             <remarks>
 
-             If not explicitly set, the default value is 5.
 
-             </remarks>
 
-             <seealso cref="F:Quartz.TriggerConstants.DefaultPriority"/>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IMutableTrigger.StartTimeUtc">
 
-             <summary>
 
-             <para>
 
-             The time at which the trigger's scheduling should start.  May or may not
 
-             be the first actual fire time of the trigger, depending upon the type of
 
-             trigger and the settings of the other properties of the trigger.  However
 
-             the first actual first time will not be before this date.
 
-             </para>
 
-             <para>
 
-             Setting a value in the past may cause a new trigger to compute a first
 
-             fire time that is in the past, which may cause an immediate misfire
 
-             of the trigger.
 
-             </para>
 
-             ew DateTimeOffset StartTimeUtc {  get; set; }
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IMutableTrigger.EndTimeUtc">
 
-             <summary>
 
-             <para>
 
-             Set the time at which the <see cref="T:Quartz.ITrigger"/> should quit repeating -
 
-             regardless of any remaining repeats (based on the trigger's particular
 
-             repeat settings).
 
-             </para>
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IMutableTrigger.MisfireInstruction">
 
-             <summary>
 
-             Set the instruction the <see cref="T:Quartz.IScheduler"/> should be given for
 
-             handling misfire situations for this <see cref="T:Quartz.ITrigger"/>- the
 
-             concrete <see cref="T:Quartz.ITrigger"/> type that you are using will have
 
-             defined a set of additional MisfireInstruction.XXX
 
-             constants that may be passed to this method.
 
-             </summary>
 
-             <remarks>
 
-             If not explicitly set, the default value is <see cref="F:Quartz.MisfireInstruction.SmartPolicy"/>.
 
-             </remarks>
 
-             <seealso cref="F:Quartz.MisfireInstruction.SmartPolicy"/>
 
-             <seealso cref="T:Quartz.ISimpleTrigger"/>
 
-             <seealso cref="T:Quartz.ICronTrigger"/>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IOperableTrigger.Triggered(Quartz.ICalendar)">
 
-             <summary>
 
-             This method should not be used by the Quartz client.
 
-             </summary>
 
-             <remarks>
 
-             Called when the <see cref="T:Quartz.IScheduler"/> has decided to 'fire'
 
-             the trigger (Execute the associated <see cref="T:Quartz.IJob"/>), in order to
 
-             give the <see cref="T:Quartz.ITrigger"/> a chance to update itself for its next
 
-             triggering (if any).
 
-             </remarks>
 
-             <seealso cref="T:Quartz.JobExecutionException"/>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IOperableTrigger.ComputeFirstFireTimeUtc(Quartz.ICalendar)">
 
-             <summary>
 
-             This method should not be used by the Quartz client.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             Called by the scheduler at the time a <see cref="T:Quartz.ITrigger"/> is first
 
-             added to the scheduler, in order to have the <see cref="T:Quartz.ITrigger"/>
 
-             compute its first fire time, based on any associated calendar.
 
-             </para>
 
-             
 
-             <para>
 
-             After this method has been called, <see cref="M:Quartz.ITrigger.GetNextFireTimeUtc"/>
 
-             should return a valid answer.
 
-             </para>
 
-             </remarks>
 
-             <returns> 
 
-             The first time at which the <see cref="T:Quartz.ITrigger"/> will be fired
 
-             by the scheduler, which is also the same value <see cref="M:Quartz.ITrigger.GetNextFireTimeUtc"/>
 
-             will return (until after the first firing of the <see cref="T:Quartz.ITrigger"/>).
 
-             </returns>     
 
-         </member>
 
-         <member name="M:Quartz.Spi.IOperableTrigger.ExecutionComplete(Quartz.IJobExecutionContext,Quartz.JobExecutionException)">
 
-             <summary>
 
-             This method should not be used by the Quartz client.
 
-             </summary>
 
-             <remarks>
 
-             Called after the <see cref="T:Quartz.IScheduler"/> has executed the
 
-             <see cref="T:Quartz.IJobDetail"/> associated with the <see cref="T:Quartz.ITrigger"/>
 
-             in order to get the final instruction code from the trigger.
 
-             </remarks>
 
-             <param name="context">
 
-             is the <see cref="T:Quartz.IJobExecutionContext"/> that was used by the
 
-             <see cref="T:Quartz.IJob"/>'s<see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> method.</param>
 
-             <param name="result">is the <see cref="T:Quartz.JobExecutionException"/> thrown by the
 
-             <see cref="T:Quartz.IJob"/>, if any (may be null).
 
-             </param>
 
-             <returns>
 
-             One of the <see cref="T:Quartz.SchedulerInstruction"/> members.
 
-             </returns>
 
-             <seealso cref="F:Quartz.SchedulerInstruction.NoInstruction"/>
 
-             <seealso cref="F:Quartz.SchedulerInstruction.ReExecuteJob"/>
 
-             <seealso cref="F:Quartz.SchedulerInstruction.DeleteTrigger"/>
 
-             <seealso cref="F:Quartz.SchedulerInstruction.SetTriggerComplete"/>
 
-             <seealso cref="M:Quartz.Spi.IOperableTrigger.Triggered(Quartz.ICalendar)"/>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IOperableTrigger.UpdateAfterMisfire(Quartz.ICalendar)">
 
-             <summary> 
 
-             This method should not be used by the Quartz client.
 
-             <para>
 
-             To be implemented by the concrete classes that extend this class.
 
-             </para>
 
-             <para>
 
-             The implementation should update the <see cref="T:Quartz.ITrigger"/>'s state
 
-             based on the MISFIRE_INSTRUCTION_XXX that was selected when the <see cref="T:Quartz.ITrigger"/>
 
-             was created.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IOperableTrigger.UpdateWithNewCalendar(Quartz.ICalendar,System.TimeSpan)">
 
-             <summary> 
 
-             This method should not be used by the Quartz client.
 
-             <para>
 
-             The implementation should update the <see cref="T:Quartz.ITrigger"/>'s state
 
-             based on the given new version of the associated <see cref="T:Quartz.ICalendar"/>
 
-             (the state should be updated so that it's next fire time is appropriate
 
-             given the Calendar's new settings). 
 
-             </para>
 
-             </summary>
 
-             <param name="cal"> </param>
 
-             <param name="misfireThreshold"></param>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IOperableTrigger.Validate">
 
-             <summary>
 
-             Validates whether the properties of the <see cref="T:Quartz.IJobDetail"/> are
 
-             valid for submission into a <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IOperableTrigger.FireInstanceId">
 
-             <summary> 
 
-             This method should not be used by the Quartz client.
 
-             </summary>
 
-             <remarks>
 
-             Usable by <see cref="T:Quartz.Spi.IJobStore"/>
 
-             implementations, in order to facilitate 'recognizing' instances of fired
 
-             <see cref="T:Quartz.ITrigger"/> s as their jobs complete execution.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.GetPreviousFireTimeUtc">
 
-             <summary>
 
-             Returns the previous time at which the <see cref="T:Quartz.ITrigger"/> fired.
 
-             If the trigger has not yet fired, <see langword="null"/> will be returned.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.#ctor">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ITrigger"/> with no specified name, group, or <see cref="T:Quartz.IJobDetail"/>.
 
-             </summary>
 
-             <remarks>
 
-             Note that the <see cref="P:Quartz.Impl.Triggers.AbstractTrigger.Name"/>, <see cref="P:Quartz.Impl.Triggers.AbstractTrigger.Group"/> and
 
-             the <see cref="P:Quartz.Impl.Triggers.AbstractTrigger.JobName"/> and <see cref="P:Quartz.Impl.Triggers.AbstractTrigger.JobGroup"/> properties
 
-             must be set before the <see cref="T:Quartz.ITrigger"/> can be placed into a
 
-             <see cref="T:Quartz.IScheduler"/>.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.#ctor(System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ITrigger"/> with the given name, and default group.
 
-             </summary>
 
-             <remarks>
 
-             Note that the <see cref="P:Quartz.Impl.Triggers.AbstractTrigger.JobName"/> and <see cref="P:Quartz.Impl.Triggers.AbstractTrigger.JobGroup"/>
 
-             properties must be set before the <see cref="T:Quartz.ITrigger"/>
 
-             can be placed into a <see cref="T:Quartz.IScheduler"/>.
 
-             </remarks>
 
-             <param name="name">The name.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.#ctor(System.String,System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ITrigger"/> with the given name, and group.
 
-             </summary>
 
-             <remarks>
 
-             Note that the <see cref="P:Quartz.Impl.Triggers.AbstractTrigger.JobName"/> and <see cref="P:Quartz.Impl.Triggers.AbstractTrigger.JobGroup"/>
 
-             properties must be set before the <see cref="T:Quartz.ITrigger"/>
 
-             can be placed into a <see cref="T:Quartz.IScheduler"/>.
 
-             </remarks>
 
-             <param name="name">The name.</param>
 
-             <param name="group">if <see langword="null"/>, Scheduler.DefaultGroup will be used.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.#ctor(System.String,System.String,System.String,System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ITrigger"/> with the given name, and group.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="group">if <see langword="null"/>, Scheduler.DefaultGroup will be used.</param>
 
-             <param name="jobName">Name of the job.</param>
 
-             <param name="jobGroup">The job group.</param>
 
-             <exception cref="T:System.ArgumentException"> ArgumentException
 
-             if name is null or empty, or the group is an empty string.
 
-             </exception>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.Triggered(Quartz.ICalendar)">
 
-             <summary>
 
-             This method should not be used by the Quartz client.
 
-             </summary>
 
-             <remarks>
 
-             Called when the <see cref="T:Quartz.IScheduler"/> has decided to 'fire'
 
-             the trigger (Execute the associated <see cref="T:Quartz.IJob"/>), in order to
 
-             give the <see cref="T:Quartz.ITrigger"/> a chance to update itself for its next
 
-             triggering (if any).
 
-             </remarks>
 
-             <seealso cref="T:Quartz.JobExecutionException"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.ComputeFirstFireTimeUtc(Quartz.ICalendar)">
 
-             <summary>
 
-             This method should not be used by the Quartz client.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             Called by the scheduler at the time a <see cref="T:Quartz.ITrigger"/> is first
 
-             added to the scheduler, in order to have the <see cref="T:Quartz.ITrigger"/>
 
-             compute its first fire time, based on any associated calendar.
 
-             </para>
 
-             
 
-             <para>
 
-             After this method has been called, <see cref="M:Quartz.Impl.Triggers.AbstractTrigger.GetNextFireTimeUtc"/>
 
-             should return a valid answer.
 
-             </para>
 
-             </remarks>
 
-             <returns> 
 
-             The first time at which the <see cref="T:Quartz.ITrigger"/> will be fired
 
-             by the scheduler, which is also the same value <see cref="M:Quartz.Impl.Triggers.AbstractTrigger.GetNextFireTimeUtc"/>
 
-             will return (until after the first firing of the <see cref="T:Quartz.ITrigger"/>).
 
-             </returns>        
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.ExecutionComplete(Quartz.IJobExecutionContext,Quartz.JobExecutionException)">
 
-             <summary>
 
-             This method should not be used by the Quartz client.
 
-             </summary>
 
-             <remarks>
 
-             Called after the <see cref="T:Quartz.IScheduler"/> has executed the
 
-             <see cref="T:Quartz.IJobDetail"/> associated with the <see cref="T:Quartz.ITrigger"/>
 
-             in order to get the final instruction code from the trigger.
 
-             </remarks>
 
-             <param name="context">
 
-             is the <see cref="T:Quartz.IJobExecutionContext"/> that was used by the
 
-             <see cref="T:Quartz.IJob"/>'s<see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> method.</param>
 
-             <param name="result">is the <see cref="T:Quartz.JobExecutionException"/> thrown by the
 
-             <see cref="T:Quartz.IJob"/>, if any (may be null).
 
-             </param>
 
-             <returns>
 
-             One of the <see cref="T:Quartz.SchedulerInstruction"/> members.
 
-             </returns>
 
-             <seealso cref="T:Quartz.SchedulerInstruction"/>
 
-             <seealso cref="M:Quartz.Impl.Triggers.AbstractTrigger.Triggered(Quartz.ICalendar)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.GetMayFireAgain">
 
-             <summary> 
 
-             Used by the <see cref="T:Quartz.IScheduler"/> to determine whether or not
 
-             it is possible for this <see cref="T:Quartz.ITrigger"/> to fire again.
 
-             <para>
 
-             If the returned value is <see langword="false"/> then the <see cref="T:Quartz.IScheduler"/>
 
-             may remove the <see cref="T:Quartz.ITrigger"/> from the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.GetNextFireTimeUtc">
 
-              <summary>
 
-              Returns the next time at which the <see cref="T:Quartz.ITrigger"/> is scheduled to fire. If
 
-              the trigger will not fire again, <see langword="null"/> will be returned.  Note that
 
-              the time returned can possibly be in the past, if the time that was computed
 
-              for the trigger to next fire has already arrived, but the scheduler has not yet
 
-              been able to fire the trigger (which would likely be due to lack of resources
 
-              e.g. threads).
 
-              </summary>
 
-             <remarks>
 
-              The value returned is not guaranteed to be valid until after the <see cref="T:Quartz.ITrigger"/>
 
-              has been added to the scheduler.
 
-              </remarks>
 
-              <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.GetFireTimeAfter(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Returns the next time at which the <see cref="T:Quartz.ITrigger"/> will fire,
 
-             after the given time. If the trigger will not fire after the given time,
 
-             <see langword="null"/> will be returned.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.ValidateMisfireInstruction(System.Int32)">
 
-             <summary>
 
-             Validates the misfire instruction.
 
-             </summary>
 
-             <param name="misfireInstruction">The misfire instruction.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.UpdateAfterMisfire(Quartz.ICalendar)">
 
-             <summary> 
 
-             This method should not be used by the Quartz client.
 
-             <para>
 
-             To be implemented by the concrete classes that extend this class.
 
-             </para>
 
-             <para>
 
-             The implementation should update the <see cref="T:Quartz.ITrigger"/>'s state
 
-             based on the MISFIRE_INSTRUCTION_XXX that was selected when the <see cref="T:Quartz.ITrigger"/>
 
-             was created.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.UpdateWithNewCalendar(Quartz.ICalendar,System.TimeSpan)">
 
-             <summary> 
 
-             This method should not be used by the Quartz client.
 
-             <para>
 
-             The implementation should update the <see cref="T:Quartz.ITrigger"/>'s state
 
-             based on the given new version of the associated <see cref="T:Quartz.ICalendar"/>
 
-             (the state should be updated so that it's next fire time is appropriate
 
-             given the Calendar's new settings). 
 
-             </para>
 
-             </summary>
 
-             <param name="cal"> </param>
 
-             <param name="misfireThreshold"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.Validate">
 
-             <summary>
 
-             Validates whether the properties of the <see cref="T:Quartz.IJobDetail"/> are
 
-             valid for submission into a <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.ToString">
 
-             <summary>
 
-             Return a simple string representation of this object.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.CompareTo(Quartz.ITrigger)">
 
-             <summary>
 
-             Compare the next fire time of this <see cref="T:Quartz.ITrigger"/> to that of
 
-             another by comparing their keys, or in other words, sorts them
 
-             according to the natural (i.e. alphabetical) order of their keys.
 
-             </summary>
 
-             <param name="other"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.Equals(System.Object)">
 
-             <summary>
 
-             Determines whether the specified <see cref="T:System.Object"></see> is equal to the current <see cref="T:System.Object"></see>.
 
-             </summary>
 
-             <param name="obj">The <see cref="T:System.Object"></see> to compare with the current <see cref="T:System.Object"></see>.</param>
 
-             <returns>
 
-             true if the specified <see cref="T:System.Object"></see> is equal to the current <see cref="T:System.Object"></see>; otherwise, false.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.Equals(Quartz.Impl.Triggers.AbstractTrigger)">
 
-             <summary>
 
-             Trigger equality is based upon the equality of the TriggerKey.
 
-             </summary>
 
-             <param name="trigger"></param>
 
-             <returns>true if the key of this Trigger equals that of the given Trigger</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.GetHashCode">
 
-             <summary>
 
-             Serves as a hash function for a particular type. <see cref="M:System.Object.GetHashCode"></see> is suitable for use in hashing algorithms and data structures like a hash table.
 
-             </summary>
 
-             <returns>
 
-             A hash code for the current <see cref="T:System.Object"></see>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.AbstractTrigger.Clone">
 
-             <summary>
 
-             Creates a new object that is a copy of the current instance.
 
-             </summary>
 
-             <returns>
 
-             A new object that is a copy of this instance.
 
-             </returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.Name">
 
-             <summary>
 
-             Get or sets the name of this <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException">If name is null or empty.</exception>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.Group">
 
-             <summary>
 
-             Get the group of this <see cref="T:Quartz.ITrigger"/>. If <see langword="null"/>, Scheduler.DefaultGroup will be used.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException"> 
 
-             if group is an empty string.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.JobName">
 
-             <summary>
 
-             Get or set the name of the associated <see cref="T:Quartz.IJobDetail"/>.
 
-             </summary> 
 
-             <exception cref="T:System.ArgumentException"> 
 
-             if jobName is null or empty.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.JobGroup">
 
-             <summary>
 
-             Gets or sets the name of the associated <see cref="T:Quartz.IJobDetail"/>'s
 
-             group. If set with <see langword="null"/>, Scheduler.DefaultGroup will be used.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException"> ArgumentException
 
-             if group is an empty string.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.FullName">
 
-             <summary>
 
-             Returns the 'full name' of the <see cref="T:Quartz.ITrigger"/> in the format
 
-             "group.name".
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.Key">
 
-             <summary>
 
-             Gets the key.
 
-             </summary>
 
-             <value>The key.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.FullJobName">
 
-             <summary>
 
-             Returns the 'full name' of the <see cref="T:Quartz.IJob"/> that the <see cref="T:Quartz.ITrigger"/>
 
-             points to, in the format "group.name".
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.Description">
 
-             <summary>
 
-             Get or set the description given to the <see cref="T:Quartz.ITrigger"/> instance by
 
-             its creator (if any).
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.CalendarName">
 
-             <summary>
 
-             Get or set  the <see cref="T:Quartz.ICalendar"/> with the given name with
 
-             this Trigger. Use <see langword="null"/> when setting to dis-associate a Calendar.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.JobDataMap">
 
-             <summary>
 
-             Get or set the <see cref="P:Quartz.Impl.Triggers.AbstractTrigger.JobDataMap"/> that is associated with the 
 
-             <see cref="T:Quartz.ITrigger"/>.
 
-             <para>
 
-             Changes made to this map during job execution are not re-persisted, and
 
-             in fact typically result in an illegal state.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.FinalFireTimeUtc">
 
-             <summary>
 
-             Returns the last UTC time at which the <see cref="T:Quartz.ITrigger"/> will fire, if
 
-             the Trigger will repeat indefinitely, null will be returned.
 
-             <para>
 
-             Note that the return time *may* be in the past.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.MisfireInstruction">
 
-             <summary>
 
-             Get or set the instruction the <see cref="T:Quartz.IScheduler"/> should be given for
 
-             handling misfire situations for this <see cref="T:Quartz.ITrigger"/>- the
 
-             concrete <see cref="T:Quartz.ITrigger"/> type that you are using will have
 
-             defined a set of additional MISFIRE_INSTRUCTION_XXX
 
-             constants that may be passed to this method.
 
-             <para>
 
-             If not explicitly set, the default value is <see cref="F:Quartz.MisfireInstruction.InstructionNotSet"/>.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="F:Quartz.MisfireInstruction.InstructionNotSet"/>
 
-             <seealso cref="M:Quartz.Impl.Triggers.AbstractTrigger.UpdateAfterMisfire(Quartz.ICalendar)"/>
 
-             <seealso cref="T:Quartz.ISimpleTrigger"/>
 
-             <seealso cref="T:Quartz.ICronTrigger"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.FireInstanceId">
 
-             <summary> 
 
-             This method should not be used by the Quartz client.
 
-             </summary>
 
-             <remarks>
 
-             Usable by <see cref="T:Quartz.Spi.IJobStore"/>
 
-             implementations, in order to facilitate 'recognizing' instances of fired
 
-             <see cref="T:Quartz.ITrigger"/> s as their jobs complete execution.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.EndTimeUtc">
 
-             <summary>
 
-             Gets and sets the date/time on which the trigger must stop firing. This 
 
-             defines the final boundary for trigger firings 舒 the trigger will
 
-             not fire after to this date and time. If this value is null, no end time
 
-             boundary is assumed, and the trigger can continue indefinitely.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.StartTimeUtc">
 
-             <summary>
 
-             The time at which the trigger's scheduling should start.  May or may not
 
-             be the first actual fire time of the trigger, depending upon the type of
 
-             trigger and the settings of the other properties of the trigger.  However
 
-             the first actual first time will not be before this date.
 
-             </summary>
 
-             <remarks>
 
-             Setting a value in the past may cause a new trigger to compute a first
 
-             fire time that is in the past, which may cause an immediate misfire
 
-             of the trigger.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.HasMillisecondPrecision">
 
-             <summary>
 
-             Tells whether this Trigger instance can handle events
 
-             in millisecond precision.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.Priority">
 
-             <summary>
 
-             The priority of a <see cref="T:Quartz.ITrigger"/> acts as a tie breaker such that if 
 
-             two <see cref="T:Quartz.ITrigger"/>s have the same scheduled fire time, then Quartz
 
-             will do its best to give the one with the higher priority first access 
 
-             to a worker thread.
 
-             </summary>
 
-             <remarks>
 
-             If not explicitly set, the default value is <i>5</i>.
 
-             </remarks>
 
-             <returns></returns>
 
-             <see cref="F:Quartz.TriggerConstants.DefaultPriority"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.AbstractTrigger.HasAdditionalProperties">
 
-             <summary>
 
-             Gets a value indicating whether this instance has additional properties
 
-             that should be considered when for example saving to database. 
 
-             </summary>
 
-             <remarks>
 
-             If trigger implementation has additional properties that need to be saved 
 
-             with base properties you need to make your class override this property with value true.
 
-             Returning true will effectively mean that ADOJobStore needs to serialize 
 
-             this trigger instance to make sure additional properties are also saved.
 
-             </remarks>
 
-             <value>
 
-             	<c>true</c> if this instance has additional properties; otherwise, <c>false</c>.
 
-             </value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl">
 
-             <summary>
 
-              A concrete <see cref="T:Quartz.ITrigger"/> that is used to fire a <see cref="T:Quartz.IJobDetail"/>
 
-              based upon repeating calendar time intervals.
 
-              </summary>
 
-             <remarks>
 
-             The trigger will fire every N (see <see cref="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.RepeatInterval"/>) units of calendar time
 
-             (see <see cref="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.RepeatIntervalUnit"/>) as specified in the trigger's definition.  
 
-             This trigger can achieve schedules that are not possible with <see cref="T:Quartz.ISimpleTrigger"/> (e.g 
 
-             because months are not a fixed number of seconds) or <see cref="T:Quartz.ICronTrigger"/> (e.g. because
 
-             "every 5 months" is not an even divisor of 12).
 
-             <para>
 
-             If you use an interval unit of <see cref="F:Quartz.IntervalUnit.Month"/> then care should be taken when setting
 
-             a <see cref="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.StartTimeUtc"/> value that is on a day near the end of the month.  For example,
 
-             if you choose a start time that occurs on January 31st, and have a trigger with unit
 
-             <see cref="F:Quartz.IntervalUnit.Month"/> and interval 1, then the next fire time will be February 28th, 
 
-             and the next time after that will be March 28th - and essentially each subsequent firing will 
 
-             occur on the 28th of the month, even if a 31st day exists.  If you want a trigger that always
 
-             fires on the last day of the month - regardless of the number of days in the month, 
 
-             you should use <see cref="T:Quartz.ICronTrigger"/>.
 
-             </para> 
 
-             </remarks>
 
-             <see cref="T:Quartz.ITrigger"/>
 
-             <see cref="T:Quartz.ICronTrigger"/>
 
-             <see cref="T:Quartz.ISimpleTrigger"/>
 
-             <see cref="T:Quartz.IDailyTimeIntervalTrigger"/>
 
-             <since>2.0</since>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.ICalendarIntervalTrigger">
 
-             <summary>
 
-              A <see cref="T:Quartz.ITrigger"/> that is used to fire a <see cref="T:Quartz.IJobDetail"/>
 
-              based upon repeating calendar time intervals.
 
-              </summary>
 
-         </member>
 
-         <member name="P:Quartz.ICalendarIntervalTrigger.RepeatIntervalUnit">
 
-             <summary>
 
-             Get or set the interval unit - the time unit on with the interval applies.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ICalendarIntervalTrigger.RepeatInterval">
 
-             <summary>
 
-             Get the the time interval that will be added to the <see cref="T:Quartz.ICalendarIntervalTrigger"/>'s
 
-             fire time (in the set repeat interval unit) in order to calculate the time of the 
 
-             next trigger repeat.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ICalendarIntervalTrigger.TimesTriggered">
 
-             <summary>
 
-             Get the number of times the <see cref="T:Quartz.ICalendarIntervalTrigger"/> has already fired.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ICalendarIntervalTrigger.TimeZone">
 
-             <summary>
 
-             Gets the time zone within which time calculations related to this trigger will be performed.
 
-             </summary>
 
-             <remarks>
 
-             If null, the system default TimeZone will be used.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.ICalendarIntervalTrigger.PreserveHourOfDayAcrossDaylightSavings">
 
-             <summary>
 
-              If intervals are a day or greater, this property (set to true) will 
 
-              cause the firing of the trigger to always occur at the same time of day,
 
-              (the time of day of the startTime) regardless of daylight saving time 
 
-              transitions.  Default value is false.
 
-              </summary>
 
-              <remarks>
 
-              <para>
 
-              For example, without the property set, your trigger may have a start 
 
-              time of 9:00 am on March 1st, and a repeat interval of 2 days.  But 
 
-              after the daylight saving transition occurs, the trigger may start 
 
-              firing at 8:00 am every other day.
 
-              </para>
 
-              <para>
 
-              If however, the time of day does not exist on a given day to fire
 
-              (e.g. 2:00 am in the United States on the days of daylight saving
 
-              transition), the trigger will go ahead and fire one hour off on 
 
-              that day, and then resume the normal hour on other days.  If
 
-              you wish for the trigger to never fire at the "wrong" hour, then
 
-              you should set the property skipDayIfHourDoesNotExist.
 
-              </para>
 
-             </remarks>
 
-              <seealso cref="P:Quartz.ICalendarIntervalTrigger.SkipDayIfHourDoesNotExist"/>
 
-              <seealso cref="P:Quartz.ICalendarIntervalTrigger.TimeZone"/>
 
-              <seealso cref="M:Quartz.TriggerBuilder.StartAt(System.DateTimeOffset)"/>
 
-         </member>
 
-         <member name="P:Quartz.ICalendarIntervalTrigger.SkipDayIfHourDoesNotExist">
 
-             <summary>
 
-             If intervals are a day or greater, and 
 
-             preserveHourOfDayAcrossDaylightSavings property is set to true, and the
 
-             hour of the day does not exist on a given day for which the trigger 
 
-             would fire, the day will be skipped and the trigger advanced a second
 
-             interval if this property is set to true.  Defaults to false.
 
-             </summary>
 
-             <remarks>
 
-             <b>CAUTION!</b>  If you enable this property, and your hour of day happens 
 
-             to be that of daylight savings transition (e.g. 2:00 am in the United 
 
-             States) and the trigger's interval would have had the trigger fire on
 
-             that day, then you may actually completely miss a firing on the day of 
 
-             transition if that hour of day does not exist on that day!  In such a 
 
-             case the next fire time of the trigger will be computed as double (if 
 
-             the interval is 2 days, then a span of 4 days between firings will 
 
-             occur).
 
-             </remarks>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.PreserveHourOfDayAcrossDaylightSavings"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.#ctor">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ICalendarIntervalTrigger"/> with no settings.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.#ctor(System.String,Quartz.IntervalUnit,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl"/> that will occur immediately, and
 
-             repeat at the the given interval.
 
-             </summary>
 
-             <param name="name">Name for the trigger instance.</param>
 
-             <param name="intervalUnit">The repeat interval unit (minutes, days, months, etc).</param>
 
-             <param name="repeatInterval">The number of milliseconds to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.#ctor(System.String,System.String,Quartz.IntervalUnit,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ICalendarIntervalTrigger"/> that will occur immediately, and
 
-             repeat at the the given interval
 
-             </summary>
 
-             <param name="name">Name for the trigger instance.</param>
 
-             <param name="group">Group for the trigger instance.</param>
 
-             <param name="intervalUnit">The repeat interval unit (minutes, days, months, etc).</param>
 
-             <param name="repeatInterval">The number of milliseconds to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.#ctor(System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},Quartz.IntervalUnit,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ICalendarIntervalTrigger"/> that will occur at the given time,
 
-             and repeat at the the given interval until the given end time.
 
-             </summary>
 
-             <param name="name">Name for the trigger instance.</param>
 
-             <param name="startTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/> to fire.</param>
 
-             <param name="endTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/> to quit repeat firing.</param>
 
-             <param name="intervalUnit">The repeat interval unit (minutes, days, months, etc).</param>
 
-             <param name="repeatInterval">The number of milliseconds to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.#ctor(System.String,System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},Quartz.IntervalUnit,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ICalendarIntervalTrigger"/> that will occur at the given time,
 
-             and repeat at the the given interval until the given end time.
 
-             </summary>
 
-             <param name="name">Name for the trigger instance.</param>
 
-             <param name="group">Group for the trigger instance.</param>
 
-             <param name="startTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/> to fire.</param>
 
-             <param name="endTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/> to quit repeat firing.</param>
 
-             <param name="intervalUnit">The repeat interval unit (minutes, days, months, etc).</param>
 
-             <param name="repeatInterval">The number of milliseconds to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.#ctor(System.String,System.String,System.String,System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},Quartz.IntervalUnit,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ICalendarIntervalTrigger"/> that will occur at the given time,
 
-             and repeat at the the given interval until the given end time.
 
-             </summary>
 
-             <param name="name">Name for the trigger instance.</param>
 
-             <param name="group">Group for the trigger instance.</param>
 
-             <param name="jobName">Name of the associated job.</param>
 
-             <param name="jobGroup">Group of the associated job.</param>
 
-             <param name="startTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/> to fire.</param>
 
-             <param name="endTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/> to quit repeat firing.</param>
 
-             <param name="intervalUnit">The repeat interval unit (minutes, days, months, etc).</param>
 
-             <param name="repeatInterval">The number of milliseconds to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.ValidateMisfireInstruction(System.Int32)">
 
-             <summary>
 
-             Validates the misfire instruction.
 
-             </summary>
 
-             <param name="misfireInstruction">The misfire instruction.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.UpdateAfterMisfire(Quartz.ICalendar)">
 
-             <summary> 
 
-             Updates the <see cref="T:Quartz.ICalendarIntervalTrigger"/>'s state based on the
 
-             MisfireInstruction.XXX that was selected when the <see cref="T:Quartz.ICalendarIntervalTrigger"/>
 
-             was created.
 
-             </summary>
 
-             <remarks>
 
-             If the misfire instruction is set to <see cref="F:Quartz.MisfireInstruction.SmartPolicy"/>,
 
-             then the following scheme will be used:
 
-             <ul>
 
-                 <li>The instruction will be interpreted as <see cref="F:Quartz.MisfireInstruction.CalendarIntervalTrigger.FireOnceNow"/></li>
 
-             </ul>
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.Triggered(Quartz.ICalendar)">
 
-             <summary>
 
-             This method should not be used by the Quartz client.
 
-             <para>
 
-             Called when the <see cref="T:Quartz.IScheduler"/> has decided to 'fire'
 
-             the trigger (Execute the associated <see cref="T:Quartz.IJob"/>), in order to
 
-             give the <see cref="T:Quartz.ITrigger"/> a chance to update itself for its next
 
-             triggering (if any).
 
-             </para>
 
-             </summary>
 
-             <seealso cref="T:Quartz.JobExecutionException"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.UpdateWithNewCalendar(Quartz.ICalendar,System.TimeSpan)">
 
-             <summary> 
 
-             This method should not be used by the Quartz client.
 
-             <para>
 
-             The implementation should update the <see cref="T:Quartz.ITrigger"/>'s state
 
-             based on the given new version of the associated <see cref="T:Quartz.ICalendar"/>
 
-             (the state should be updated so that it's next fire time is appropriate
 
-             given the Calendar's new settings). 
 
-             </para>
 
-             </summary>
 
-             <param name="calendar"> </param>
 
-             <param name="misfireThreshold"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.ComputeFirstFireTimeUtc(Quartz.ICalendar)">
 
-             <summary>
 
-             This method should not be used by the Quartz client.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             Called by the scheduler at the time a <see cref="T:Quartz.ITrigger"/> is first
 
-             added to the scheduler, in order to have the <see cref="T:Quartz.ITrigger"/>
 
-             compute its first fire time, based on any associated calendar.
 
-             </para>
 
-             
 
-             <para>
 
-             After this method has been called, <see cref="M:Quartz.ITrigger.GetNextFireTimeUtc"/>
 
-             should return a valid answer.
 
-             </para>
 
-             </remarks>
 
-             <returns> 
 
-             The first time at which the <see cref="T:Quartz.ITrigger"/> will be fired
 
-             by the scheduler, which is also the same value <see cref="M:Quartz.ITrigger.GetNextFireTimeUtc"/>
 
-             will return (until after the first firing of the <see cref="T:Quartz.ITrigger"/>).
 
-             </returns>        
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.GetNextFireTimeUtc">
 
-              <summary>
 
-              Returns the next time at which the <see cref="T:Quartz.ITrigger"/> is scheduled to fire. If
 
-              the trigger will not fire again, <see langword="null"/> will be returned.  Note that
 
-              the time returned can possibly be in the past, if the time that was computed
 
-              for the trigger to next fire has already arrived, but the scheduler has not yet
 
-              been able to fire the trigger (which would likely be due to lack of resources
 
-              e.g. threads).
 
-              </summary>
 
-             <remarks>
 
-              The value returned is not guaranteed to be valid until after the <see cref="T:Quartz.ITrigger"/>
 
-              has been added to the scheduler.
 
-              </remarks>
 
-              <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.GetPreviousFireTimeUtc">
 
-             <summary>
 
-             Returns the previous time at which the <see cref="T:Quartz.ICalendarIntervalTrigger"/> fired.
 
-             If the trigger has not yet fired, <see langword="null"/> will be returned.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.GetFireTimeAfter(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Returns the next time at which the <see cref="T:Quartz.ICalendarIntervalTrigger"/> will fire,
 
-             after the given time. If the trigger will not fire after the given time,
 
-             <see langword="null"/> will be returned.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.GetMayFireAgain">
 
-             <summary>
 
-             Determines whether or not the <see cref="T:Quartz.ICalendarIntervalTrigger"/> will occur
 
-             again.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.Validate">
 
-             <summary>
 
-             Validates whether the properties of the <see cref="T:Quartz.IJobDetail"/> are
 
-             valid for submission into a <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.StartTimeUtc">
 
-             <summary>
 
-             Get the time at which the <see cref="T:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl"/> should occur.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.HasMillisecondPrecision">
 
-             <summary>
 
-             Tells whether this Trigger instance can handle events
 
-             in millisecond precision.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.EndTimeUtc">
 
-             <summary>
 
-             Get the time at which the <see cref="T:Quartz.ICalendarIntervalTrigger"/> should quit
 
-             repeating.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.RepeatIntervalUnit">
 
-             <summary>
 
-             Get or set the interval unit - the time unit on with the interval applies.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.RepeatInterval">
 
-             <summary>
 
-             Get the the time interval that will be added to the <see cref="T:Quartz.ICalendarIntervalTrigger"/>'s
 
-             fire time (in the set repeat interval unit) in order to calculate the time of the 
 
-             next trigger repeat.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.PreserveHourOfDayAcrossDaylightSavings">
 
-             <summary>
 
-              If intervals are a day or greater, this property (set to true) will 
 
-              cause the firing of the trigger to always occur at the same time of day,
 
-              (the time of day of the startTime) regardless of daylight saving time 
 
-              transitions.  Default value is false.
 
-              </summary>
 
-              <remarks>
 
-              <para>
 
-              For example, without the property set, your trigger may have a start 
 
-              time of 9:00 am on March 1st, and a repeat interval of 2 days.  But 
 
-              after the daylight saving transition occurs, the trigger may start 
 
-              firing at 8:00 am every other day.
 
-              </para>
 
-              <para>
 
-              If however, the time of day does not exist on a given day to fire
 
-              (e.g. 2:00 am in the United States on the days of daylight saving
 
-              transition), the trigger will go ahead and fire one hour off on 
 
-              that day, and then resume the normal hour on other days.  If
 
-              you wish for the trigger to never fire at the "wrong" hour, then
 
-              you should set the property skipDayIfHourDoesNotExist.
 
-              </para>
 
-             </remarks>
 
-              <seealso cref="P:Quartz.ICalendarIntervalTrigger.SkipDayIfHourDoesNotExist"/>
 
-              <seealso cref="P:Quartz.ICalendarIntervalTrigger.TimeZone"/>
 
-              <seealso cref="M:Quartz.TriggerBuilder.StartAt(System.DateTimeOffset)"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.SkipDayIfHourDoesNotExist">
 
-             <summary>
 
-             If intervals are a day or greater, and 
 
-             preserveHourOfDayAcrossDaylightSavings property is set to true, and the
 
-             hour of the day does not exist on a given day for which the trigger 
 
-             would fire, the day will be skipped and the trigger advanced a second
 
-             interval if this property is set to true.  Defaults to false.
 
-             </summary>
 
-             <remarks>
 
-             <b>CAUTION!</b>  If you enable this property, and your hour of day happens 
 
-             to be that of daylight savings transition (e.g. 2:00 am in the United 
 
-             States) and the trigger's interval would have had the trigger fire on
 
-             that day, then you may actually completely miss a firing on the day of 
 
-             transition if that hour of day does not exist on that day!  In such a 
 
-             case the next fire time of the trigger will be computed as double (if 
 
-             the interval is 2 days, then a span of 4 days between firings will 
 
-             occur).
 
-             </remarks>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.PreserveHourOfDayAcrossDaylightSavings"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.TimesTriggered">
 
-             <summary>
 
-             Get the number of times the <see cref="T:Quartz.ICalendarIntervalTrigger"/> has already fired.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CalendarIntervalTriggerImpl.FinalFireTimeUtc">
 
-             <summary>
 
-             Returns the final time at which the <see cref="T:Quartz.ICalendarIntervalTrigger"/> will
 
-             fire, if there is no end time set, null will be returned.
 
-             </summary>
 
-             <value></value>
 
-             <remarks>Note that the return time may be in the past.</remarks>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Triggers.CronTriggerImpl">
 
-             <summary>
 
-             A concrete <see cref="T:Quartz.ITrigger"/> that is used to fire a <see cref="T:Quartz.IJobDetail"/>
 
-             at given moments in time, defined with Unix 'cron-like' definitions.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             For those unfamiliar with "cron", this means being able to create a firing
 
-             schedule such as: "At 8:00am every Monday through Friday" or "At 1:30am
 
-             every last Friday of the month".
 
-             </para>
 
-             
 
-             <para>
 
-             The format of a "Cron-Expression" string is documented on the 
 
-             <see cref="P:Quartz.Impl.Triggers.CronTriggerImpl.CronExpression"/> class.
 
-             </para>
 
-             
 
-             <para>
 
-             Here are some full examples: <br/>
 
-             <table cellspacing="8">
 
-             <tr>
 
-             <th align="left">Expression</th>
 
-             <th align="left"> </th>
 
-             <th align="left">Meaning</th>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 0 12 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 12pm (noon) every day" /></td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * *"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am every day" /></td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am every day" /></td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 * * ? *"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am every day" /></td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 * * ? 2005"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am every day during the year 2005" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 * 14 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire every minute starting at 2pm and ending at 2:59pm, every day" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 0/5 14 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire every 5 minutes starting at 2pm and ending at 2:55pm, every day" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 0/5 14,18 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire every 5 minutes starting at 2pm and ending at 2:55pm, AND fire every 5 minutes starting at 6pm and ending at 6:55pm, every day" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 0-5 14 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire every minute starting at 2pm and ending at 2:05pm, every day" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 10,44 14 ? 3 WED"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 2:10pm and at 2:44pm every Wednesday in the month of March." />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * MON-FRI"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am every Monday, Tuesday, Wednesday, Thursday and Friday" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 15 * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on the 15th day of every month" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 L * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on the last day of every month" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * 6L"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on the last Friday of every month" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * 6L"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on the last Friday of every month" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * 6L 2002-2005"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on every last Friday of every month during the years 2002, 2003, 2004 and 2005" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * 6#3"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on the third Friday of every month" />
 
-             </td>
 
-             </tr>
 
-             </table>
 
-             </para>
 
-             
 
-             <para>
 
-             Pay attention to the effects of '?' and '*' in the day-of-week and
 
-             day-of-month fields!
 
-             </para>
 
-             
 
-             <para>
 
-             <b>NOTES:</b>
 
-             <ul>
 
-             <li>Support for specifying both a day-of-week and a day-of-month value is
 
-             not complete (you'll need to use the '?' character in on of these fields).
 
-             </li>
 
-             <li>Be careful when setting fire times between mid-night and 1:00 AM -
 
-             "daylight savings" can cause a skip or a repeat depending on whether the
 
-             time moves back or jumps forward.</li>
 
-             </ul>
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <seealso cref="T:Quartz.ISimpleTrigger"/>
 
-             <author>Sharada Jambula</author>
 
-             <author>James House</author>
 
-             <author>Contributions from Mads Henderson</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.ICronTrigger">
 
-             <summary>
 
-             The public interface for inspecting settings specific to a CronTrigger, 
 
-             which is used to fire a <see cref="T:Quartz.IJob"/>
 
-             at given moments in time, defined with Unix 'cron-like' schedule definitions.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             For those unfamiliar with "cron", this means being able to create a firing
 
-             schedule such as: "At 8:00am every Monday through Friday" or "At 1:30am
 
-             every last Friday of the month".
 
-             </para>
 
-             
 
-             <para>
 
-             The format of a "Cron-Expression" string is documented on the 
 
-             <see cref="T:Quartz.CronExpression"/> class.
 
-             </para>
 
-             
 
-             <para>
 
-             Here are some full examples: <br/>
 
-             <table cellspacing="8">
 
-             <tr>
 
-             <th align="left">Expression</th>
 
-             <th align="left"> </th>
 
-             <th align="left">Meaning</th>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 0 12 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 12pm (noon) every day" /></td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * *"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am every day" /></td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am every day" /></td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 * * ? *"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am every day" /></td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 * * ? 2005"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am every day during the year 2005" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 * 14 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire every minute starting at 2pm and ending at 2:59pm, every day" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 0/5 14 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire every 5 minutes starting at 2pm and ending at 2:55pm, every day" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 0/5 14,18 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire every 5 minutes starting at 2pm and ending at 2:55pm, AND fire every 5 minutes starting at 6pm and ending at 6:55pm, every day" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 0-5 14 * * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire every minute starting at 2pm and ending at 2:05pm, every day" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 10,44 14 ? 3 WED"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 2:10pm and at 2:44pm every Wednesday in the month of March." />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * MON-FRI"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am every Monday, Tuesday, Wednesday, Thursday and Friday" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 15 * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on the 15th day of every month" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 L * ?"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on the last day of every month" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * 6L"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on the last Friday of every month" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * 6L"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on the last Friday of every month" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * 6L 2002-2005"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on every last Friday of every month during the years 2002, 2003, 2004 and 2005" />
 
-             </td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">"0 15 10 ? * 6#3"" /></td>
 
-             <td align="left"> </td>
 
-             <td align="left">Fire at 10:15am on the third Friday of every month" />
 
-             </td>
 
-             </tr>
 
-             </table>
 
-             </para>
 
-             
 
-             <para>
 
-             Pay attention to the effects of '?' and '*' in the day-of-week and
 
-             day-of-month fields!
 
-             </para>
 
-             
 
-             <para>
 
-             <b>NOTES:</b>
 
-             <ul>
 
-             <li>Support for specifying both a day-of-week and a day-of-month value is
 
-             not complete (you'll need to use the '?' character in on of these fields).
 
-             </li>
 
-             <li>Be careful when setting fire times between mid-night and 1:00 AM -
 
-             "daylight savings" can cause a skip or a repeat depending on whether the
 
-             time moves back or jumps forward.</li>
 
-             </ul>
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <seealso cref="T:Quartz.ISimpleTrigger"/>
 
-             <author>Sharada Jambula</author>
 
-             <author>James House</author>
 
-             <author>Contributions from Mads Henderson</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.ICronTrigger.GetExpressionSummary">
 
-             <summary>
 
-             Gets the expression summary.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.ICronTrigger.CronExpressionString">
 
-             <summary>
 
-             Gets or sets the cron expression string.
 
-             </summary>
 
-             <value>The cron expression string.</value>
 
-         </member>
 
-         <member name="P:Quartz.ICronTrigger.TimeZone">
 
-             <summary>
 
-             Sets the time zone for which the <see cref="P:Quartz.ICronTrigger.CronExpressionString"/> of this
 
-             <see cref="T:Quartz.ICronTrigger"/> will be resolved.
 
-             </summary>
 
-             <remarks>
 
-             If <see cref="P:Quartz.ICronTrigger.CronExpressionString"/> is set after this
 
-             property, the TimeZone setting on the CronExpression will "win".  However
 
-             if <see cref="P:Quartz.ICronTrigger.CronExpressionString"/> is set after this property, the
 
-             time zone applied by this method will remain in effect, since the 
 
-             string cron expression does not carry a time zone!
 
-             </remarks>
 
-             <value>The time zone.</value>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.#ctor">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.CronTriggerImpl"/> with no settings.
 
-             </summary>
 
-             <remarks>
 
-             The start-time will also be set to the current time, and the time zone
 
-             will be set the the system's default time zone.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.#ctor(System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.CronTriggerImpl"/> with the given name and default group.
 
-             </summary>
 
-             <remarks>
 
-             The start-time will also be set to the current time, and the time zone
 
-             will be set the the system's default time zone.
 
-             </remarks>
 
-             <param name="name">The name of the <see cref="T:Quartz.ITrigger"/></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.#ctor(System.String,System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.CronTriggerImpl"/> with the given name and group.
 
-             </summary>
 
-             <remarks>
 
-             The start-time will also be set to the current time, and the time zone
 
-             will be set the the system's default time zone.
 
-             </remarks>
 
-             <param name="name">The name of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="group">The group of the <see cref="T:Quartz.ITrigger"/></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.#ctor(System.String,System.String,System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.CronTriggerImpl"/> with the given name, group and
 
-             expression.
 
-             </summary>
 
-             <remarks>
 
-             The start-time will also be set to the current time, and the time zone
 
-             will be set the the system's default time zone.
 
-             </remarks>
 
-             <param name="name">The name of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="group">The group of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="cronExpression"> A cron expression dictating the firing sequence of the <see cref="T:Quartz.ITrigger"/></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.#ctor(System.String,System.String,System.String,System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.CronTriggerImpl"/> with the given name and group, and
 
-             associated with the identified <see cref="T:Quartz.IJobDetail"/>.
 
-             </summary>
 
-             <remarks>
 
-             The start-time will also be set to the current time, and the time zone
 
-             will be set the the system's default time zone.
 
-             </remarks>
 
-             <param name="name">The name of the <see cref="T:Quartz.ITrigger"/>.</param>
 
-             <param name="group">The group of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="jobName">name of the <see cref="T:Quartz.IJobDetail"/> executed on firetime</param>
 
-             <param name="jobGroup">Group of the <see cref="T:Quartz.IJobDetail"/> executed on firetime</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.#ctor(System.String,System.String,System.String,System.String,System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ICronTrigger"/> with the given name and group,
 
-             associated with the identified <see cref="T:Quartz.IJobDetail"/>,
 
-             and with the given "cron" expression.
 
-             </summary>
 
-             <remarks>
 
-             The start-time will also be set to the current time, and the time zone
 
-             will be set the the system's default time zone.
 
-             </remarks>
 
-             <param name="name">The name of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="group">The group of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="jobName">name of the <see cref="T:Quartz.IJobDetail"/> executed on firetime</param>
 
-             <param name="jobGroup">Group of the <see cref="T:Quartz.IJobDetail"/> executed on firetime</param>
 
-             <param name="cronExpression"> A cron expression dictating the firing sequence of the <see cref="T:Quartz.ITrigger"/></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.#ctor(System.String,System.String,System.String,System.String,System.String,System.TimeZoneInfo)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ICronTrigger"/> with the given name and group,
 
-             associated with the identified <see cref="T:Quartz.IJobDetail"/>,
 
-             and with the given "cron" expression resolved with respect to the <see cref="P:Quartz.Impl.Triggers.CronTriggerImpl.TimeZone"/>.
 
-             </summary>
 
-             <param name="name">The name of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="group">The group of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="jobName">name of the <see cref="T:Quartz.IJobDetail"/> executed on firetime</param>
 
-             <param name="jobGroup">Group of the <see cref="T:Quartz.IJobDetail"/> executed on firetime</param>
 
-             <param name="cronExpression"> A cron expression dictating the firing sequence of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="timeZone">
 
-             Specifies for which time zone the cronExpression should be interpreted, 
 
-             i.e. the expression 0 0 10 * * ?, is resolved to 10:00 am in this time zone.
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.#ctor(System.String,System.String,System.String,System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.ICronTrigger"/> that will occur at the given time,
 
-             until the given end time.
 
-             <para>
 
-             If null, the start-time will also be set to the current time, the time
 
-             zone will be set the the system's default.
 
-             </para>
 
-             </summary>
 
-             <param name="name">The name of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="group">The group of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="jobName">name of the <see cref="T:Quartz.IJobDetail"/> executed on firetime</param>
 
-             <param name="jobGroup">Group of the <see cref="T:Quartz.IJobDetail"/> executed on firetime</param>
 
-             <param name="startTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the earliest time for the  <see cref="T:Quartz.ITrigger"/> to start firing.</param>
 
-             <param name="endTime">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/> to quit repeat firing.</param>
 
-             <param name="cronExpression"> A cron expression dictating the firing sequence of the <see cref="T:Quartz.ITrigger"/></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.#ctor(System.String,System.String,System.String,System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},System.String,System.TimeZoneInfo)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.CronTriggerImpl"/> with fire time dictated by the
 
-             <paramref name="cronExpression"/> resolved with respect to the specified
 
-             <paramref name="timeZone"/> occurring from the <see cref="F:Quartz.Impl.Triggers.CronTriggerImpl.startTimeUtc"/> until
 
-             the given <paramref name="endTime"/>.
 
-             </summary>
 
-             <param name="name">The name of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="group">The group of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="jobName">name of the <see cref="T:Quartz.IJobDetail"/> executed on firetime</param>
 
-             <param name="jobGroup">Group of the <see cref="T:Quartz.IJobDetail"/> executed on firetime</param>
 
-             <param name="startTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the earliest time for the <see cref="T:Quartz.ITrigger"/> to start firing.</param>
 
-             <param name="endTime">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/> to quit repeat firing.</param>
 
-             <param name="cronExpression"> A cron expression dictating the firing sequence of the <see cref="T:Quartz.ITrigger"/></param>
 
-             <param name="timeZone">
 
-             Specifies for which time zone the cronExpression should be interpreted, 
 
-             i.e. the expression 0 0 10 * * ?, is resolved to 10:00 am in this time zone.
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.Clone">
 
-             <summary>
 
-             Clones this instance.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.GetNextFireTimeUtc">
 
-              <summary>
 
-              Returns the next time at which the <see cref="T:Quartz.ITrigger"/> is scheduled to fire. If
 
-              the trigger will not fire again, <see langword="null"/> will be returned.  Note that
 
-              the time returned can possibly be in the past, if the time that was computed
 
-              for the trigger to next fire has already arrived, but the scheduler has not yet
 
-              been able to fire the trigger (which would likely be due to lack of resources
 
-              e.g. threads).
 
-              </summary>
 
-             <remarks>
 
-              The value returned is not guaranteed to be valid until after the <see cref="T:Quartz.ITrigger"/>
 
-              has been added to the scheduler.
 
-              </remarks>
 
-              <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.GetPreviousFireTimeUtc">
 
-             <summary>
 
-             Returns the previous time at which the <see cref="T:Quartz.ITrigger"/> fired.
 
-             If the trigger has not yet fired, <see langword="null"/> will be returned.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.SetNextFireTimeUtc(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Sets the next fire time.
 
-             <para>
 
-             <b>This method should not be invoked by client code.</b>
 
-             </para>
 
-             </summary>
 
-             <param name="fireTime">The fire time.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.SetPreviousFireTimeUtc(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Sets the previous fire time.
 
-             <para>
 
-             <b>This method should not be invoked by client code.</b>
 
-             </para>
 
-             </summary>
 
-             <param name="fireTime">The fire time.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.GetFireTimeAfter(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Returns the next time at which the <see cref="T:Quartz.ITrigger"/> will fire,
 
-             after the given time. If the trigger will not fire after the given time,
 
-             <see langword="null"/> will be returned.
 
-             </summary>
 
-             <param name="afterTimeUtc"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.GetMayFireAgain">
 
-             <summary>
 
-             Used by the <see cref="T:Quartz.IScheduler"/> to determine whether or not
 
-             it is possible for this <see cref="T:Quartz.ITrigger"/> to fire again.
 
-             <para>
 
-             If the returned value is <see langword="false"/> then the <see cref="T:Quartz.IScheduler"/>
 
-             may remove the <see cref="T:Quartz.ITrigger"/> from the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </para>
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.ValidateMisfireInstruction(System.Int32)">
 
-             <summary>
 
-             Validates the misfire instruction.
 
-             </summary>
 
-             <param name="misfireInstruction">The misfire instruction.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.UpdateAfterMisfire(Quartz.ICalendar)">
 
-             <summary>
 
-             This method should not be used by the Quartz client.
 
-             <para>
 
-             To be implemented by the concrete classes that extend this class.
 
-             </para>
 
-             <para>
 
-             The implementation should update the <see cref="T:Quartz.ITrigger"/>'s state
 
-             based on the MISFIRE_INSTRUCTION_XXX that was selected when the <see cref="T:Quartz.ITrigger"/>
 
-             was created.
 
-             </para>
 
-             </summary>
 
-             <param name="cal"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.WillFireOn(System.DateTimeOffset)">
 
-             <summary>
 
-             <para>
 
-             Determines whether the date and (optionally) time of the given Calendar 
 
-             instance falls on a scheduled fire-time of this trigger.
 
-             </para>
 
-             
 
-             <para>
 
-             Equivalent to calling <see cref="M:Quartz.Impl.Triggers.CronTriggerImpl.WillFireOn(System.DateTimeOffset,System.Boolean)"/>.
 
-             </para>
 
-             </summary>
 
-             <param name="test">The date to compare.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.WillFireOn(System.DateTimeOffset,System.Boolean)">
 
-             <summary>
 
-             Determines whether the date and (optionally) time of the given Calendar 
 
-             instance falls on a scheduled fire-time of this trigger.
 
-             <para>
 
-             Note that the value returned is NOT validated against the related
 
-             ICalendar (if any).
 
-             </para>
 
-             </summary>
 
-             <param name="test">The date to compare</param>
 
-             <param name="dayOnly">If set to true, the method will only determine if the
 
-             trigger will fire during the day represented by the given Calendar
 
-             (hours, minutes and seconds will be ignored).</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.Triggered(Quartz.ICalendar)">
 
-             <summary>
 
-             Called when the <see cref="T:Quartz.IScheduler"/> has decided to 'fire'
 
-             the trigger (Execute the associated <see cref="T:Quartz.IJob"/>), in order to
 
-             give the <see cref="T:Quartz.ITrigger"/> a chance to update itself for its next
 
-             triggering (if any).
 
-             </summary>
 
-             <param name="cal"></param>
 
-             <seealso cref="T:Quartz.JobExecutionException"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.UpdateWithNewCalendar(Quartz.ICalendar,System.TimeSpan)">
 
-             <summary>
 
-             Updates the trigger with new calendar.
 
-             </summary>
 
-             <param name="calendar">The calendar to update with.</param>
 
-             <param name="misfireThreshold">The misfire threshold.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.ComputeFirstFireTimeUtc(Quartz.ICalendar)">
 
-             <summary>
 
-             Called by the scheduler at the time a <see cref="T:Quartz.ITrigger"/> is first
 
-             added to the scheduler, in order to have the <see cref="T:Quartz.ITrigger"/>
 
-             compute its first fire time, based on any associated calendar.
 
-             <para>
 
-             After this method has been called, <see cref="M:Quartz.Impl.Triggers.CronTriggerImpl.GetNextFireTimeUtc"/>
 
-             should return a valid answer.
 
-             </para>
 
-             </summary>
 
-             <param name="cal"></param>
 
-             <returns>
 
-             the first time at which the <see cref="T:Quartz.ITrigger"/> will be fired
 
-             by the scheduler, which is also the same value <see cref="M:Quartz.Impl.Triggers.CronTriggerImpl.GetNextFireTimeUtc"/>
 
-             will return (until after the first firing of the <see cref="T:Quartz.ITrigger"/>).
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.GetExpressionSummary">
 
-             <summary>
 
-             Gets the expression summary.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.GetTimeAfter(System.DateTimeOffset)">
 
-             <summary>
 
-             Gets the next time to fire after the given time.
 
-             </summary>
 
-             <param name="afterTime">The time to compute from.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.CronTriggerImpl.GetTimeBefore(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             NOT YET IMPLEMENTED: Returns the time before the given time
 
-             that this <see cref="T:Quartz.ICronTrigger"/> will fire.
 
-             </summary>
 
-             <param name="date">The date.</param>
 
-             <returns></returns> 
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CronTriggerImpl.CronExpressionString">
 
-             <summary>
 
-             Gets or sets the cron expression string.
 
-             </summary>
 
-             <value>The cron expression string.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CronTriggerImpl.CronExpression">
 
-             <summary>
 
-             Set the CronExpression to the given one.  The TimeZone on the passed-in
 
-             CronExpression over-rides any that was already set on the Trigger.
 
-             </summary>
 
-             <value>The cron expression.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CronTriggerImpl.StartTimeUtc">
 
-             <summary>
 
-             Returns the date/time on which the trigger may begin firing. This
 
-             defines the initial boundary for trigger firings the trigger
 
-             will not fire prior to this date and time.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CronTriggerImpl.EndTimeUtc">
 
-             <summary>
 
-             Get or sets the time at which the <c>CronTrigger</c> should quit
 
-             repeating - even if repeatCount isn't yet satisfied. 
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CronTriggerImpl.TimeZone">
 
-             <summary>
 
-             Sets the time zone for which the <see cref="P:Quartz.ICronTrigger.CronExpressionString"/> of this
 
-             <see cref="T:Quartz.ICronTrigger"/> will be resolved.
 
-             </summary>
 
-             <remarks>
 
-             If <see cref="P:Quartz.ICronTrigger.CronExpressionString"/> is set after this
 
-             property, the TimeZone setting on the CronExpression will "win".  However
 
-             if <see cref="P:Quartz.Impl.Triggers.CronTriggerImpl.CronExpressionString"/> is set after this property, the
 
-             time zone applied by this method will remain in effect, since the 
 
-             string cron expression does not carry a time zone!
 
-             </remarks>
 
-             <value>The time zone.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CronTriggerImpl.FinalFireTimeUtc">
 
-             <summary>
 
-             Returns the last UTC time at which the <see cref="T:Quartz.ITrigger"/> will fire, if
 
-             the Trigger will repeat indefinitely, null will be returned.
 
-             <para>
 
-             Note that the return time *may* be in the past.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.CronTriggerImpl.HasMillisecondPrecision">
 
-             <summary>
 
-             Tells whether this Trigger instance can handle events
 
-             in millisecond precision.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl">
 
-             <summary>
 
-             A concrete implementation of DailyTimeIntervalTrigger that is used to fire a <see cref="T:Quartz.IJobDetail"/>
 
-             based upon daily repeating time intervals.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The trigger will fire every N (<see cref="P:Quartz.IDailyTimeIntervalTrigger.RepeatInterval"/> ) seconds, minutes or hours
 
-             (see <see cref="P:Quartz.IDailyTimeIntervalTrigger.RepeatInterval"/>) during a given time window on specified days of the week.
 
-             </para>
 
-             <para>
 
-             For example#1, a trigger can be set to fire every 72 minutes between 8:00 and 11:00 everyday. It's fire times would
 
-             be 8:00, 9:12, 10:24, then next day would repeat: 8:00, 9:12, 10:24 again.
 
-             </para>
 
-             <para>
 
-             For example#2, a trigger can be set to fire every 23 minutes between 9:20 and 16:47 Monday through Friday.
 
-             </para>
 
-             <para>
 
-             On each day, the starting fire time is reset to startTimeOfDay value, and then it will add repeatInterval value to it until
 
-             the endTimeOfDay is reached. If you set daysOfWeek values, then fire time will only occur during those week days period. Again,
 
-             remember this trigger will reset fire time each day with startTimeOfDay, regardless of your interval or endTimeOfDay!
 
-             </para>
 
-             <para>
 
-             The default values for fields if not set are: startTimeOfDay defaults to 00:00:00, the endTimeOfDay default to 23:59:59,
 
-             and daysOfWeek is default to every day. The startTime default to current time-stamp now, while endTime has not value.
 
-             </para>
 
-             <para>
 
-             If startTime is before startTimeOfDay, then startTimeOfDay will be used and startTime has no affect other than to specify
 
-             the first day of firing. Else if startTime is  after startTimeOfDay, then the first fire time for that day will be the next
 
-             interval after the startTime. For example, if you set startingTimeOfDay=9am, endingTimeOfDay=11am, interval=15 mins, and startTime=9:33am, 
 
-             then the next fire time will be 9:45pm. Note also that if you do not set startTime value, the trigger builder will default to current time, and current time 
 
-             maybe before or after the startTimeOfDay! So be aware how you set your startTime.
 
-             </para>
 
-             <para>
 
-             This trigger also supports "repeatCount" feature to end the trigger fire time after
 
-             a certain number of count is reached. Just as the SimpleTrigger, setting repeatCount=0 
 
-             means trigger will fire once only! Setting any positive count then the trigger will repeat 
 
-             count + 1 times. Unlike SimpleTrigger, the default value of repeatCount of this trigger
 
-             is set to REPEAT_INDEFINITELY instead of 0 though.
 
-             </para>
 
-             </remarks>
 
-             <see cref="T:Quartz.IDailyTimeIntervalTrigger"/>
 
-             <see cref="T:Quartz.DailyTimeIntervalScheduleBuilder"/>
 
-             <since>2.0</since>
 
-             <author>James House</author>
 
-             <author>Zemian Deng saltnlight5@gmail.com</author>
 
-             <author>Nuno Maia (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.IDailyTimeIntervalTrigger">
 
-             <summary>
 
-             A <see cref="T:Quartz.ITrigger"/> that is used to fire a <see cref="T:Quartz.IJobDetail"/>
 
-             based upon daily repeating time intervals.
 
-             </summary>
 
-             <remarks>
 
-             <para>The trigger will fire every N (see <see cref="P:Quartz.IDailyTimeIntervalTrigger.RepeatInterval"/> ) seconds, minutes or hours
 
-             (see <see cref="P:Quartz.IDailyTimeIntervalTrigger.RepeatIntervalUnit"/> during a given time window on specified days of the week.</para>
 
-             
 
-             <para>For example#1, a trigger can be set to fire every 72 minutes between 8:00 and 11:00 everyday. It's fire times 
 
-             be 8:00, 9:12, 10:24, then next day would repeat: 8:00, 9:12, 10:24 again.</para>
 
-             
 
-             <para>For example#2, a trigger can be set to fire every 23 minutes between 9:20 and 16:47 Monday through Friday. </para>
 
-             
 
-             <para>On each day, the starting fire time is reset to startTimeOfDay value, and then it will add repeatInterval value to it until
 
-             the endTimeOfDay is reached. If you set daysOfWeek values, then fire time will only occur during those week days period.</para>
 
-             
 
-             <para>The default values for fields if not set are: startTimeOfDay defaults to 00:00:00, the endTimeOfDay default to 23:59:59, 
 
-             and daysOfWeek is default to every day. The startTime default to current time-stamp now, while endTime has not value.</para>
 
-             
 
-             <para>If startTime is before startTimeOfDay, then it has no affect. Else if startTime after startTimeOfDay, then the first fire time
 
-             for that day will be normal startTimeOfDay incremental values after startTime value. Same reversal logic is applied to endTime
 
-             with endTimeOfDay.</para>
 
-             </remarks>
 
-             <see cref="T:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl"/>
 
-             <see cref="T:Quartz.DailyTimeIntervalScheduleBuilder"/>
 
-             <author>James House</author>
 
-             <author>Zemian Deng saltnlight5@gmail.com</author>
 
-             <author>Nuno Maia (.NET)</author>
 
-         </member>
 
-         <member name="P:Quartz.IDailyTimeIntervalTrigger.RepeatCount">
 
-             <summary>
 
-             Get the the number of times for interval this trigger should repeat, 
 
-             after which it will be automatically deleted.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IDailyTimeIntervalTrigger.RepeatIntervalUnit">
 
-             <summary>
 
-             Get the interval unit - the time unit on with the interval applies.
 
-             The only intervals that are valid for this type of trigger are <see cref="F:Quartz.IntervalUnit.Second"/>,
 
-             <see cref="F:Quartz.IntervalUnit.Minute"/>, and <see cref="F:Quartz.IntervalUnit.Hour"/>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IDailyTimeIntervalTrigger.RepeatInterval">
 
-             <summary>
 
-             Get the the time interval that will be added to the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/>'s
 
-             fire time (in the set repeat interval unit) in order to calculate the time of the
 
-             next trigger repeat.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IDailyTimeIntervalTrigger.StartTimeOfDay">
 
-             <summary>
 
-             The time of day to start firing at the given interval.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IDailyTimeIntervalTrigger.EndTimeOfDay">
 
-             <summary>
 
-             The time of day to complete firing at the given interval.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IDailyTimeIntervalTrigger.DaysOfWeek">
 
-             <summary>
 
-             The days of the week upon which to fire.
 
-             </summary>
 
-             <returns>
 
-             A Set containing the integers representing the days of the week, per the values 0-6 as defined by
 
-             DayOfWees.Sunday - DayOfWeek.Saturday. 
 
-             </returns>
 
-         </member>
 
-         <member name="P:Quartz.IDailyTimeIntervalTrigger.TimesTriggered">
 
-             <summary>
 
-             Get the number of times the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> has already fired.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IDailyTimeIntervalTrigger.TimeZone">
 
-             <summary>
 
-             Gets the time zone within which time calculations related to this trigger will be performed.
 
-             </summary>
 
-             <remarks>
 
-             If null, the system default TimeZone will be used.
 
-             </remarks>
 
-         </member>
 
-         <member name="F:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.RepeatIndefinitely">
 
-             <summary>
 
-             Used to indicate the 'repeat count' of the trigger is indefinite. Or in
 
-             other words, the trigger should repeat continually until the trigger's
 
-             ending timestamp.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.#ctor">
 
-             <summary>
 
-             Create a  <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> with no settings.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.#ctor(System.String,Quartz.TimeOfDay,Quartz.TimeOfDay,Quartz.IntervalUnit,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> that will occur immediately, and
 
-             repeat at the the given interval.
 
-             </summary>
 
-             <param name="name"></param>
 
-             <param name="startTimeOfDayUtc">The <see cref="T:Quartz.TimeOfDay"/> that the repeating should begin occurring.</param>
 
-             <param name="endTimeOfDayUtc">The <see cref="T:Quartz.TimeOfDay"/> that the repeating should stop occurring.</param>
 
-             <param name="intervalUnit">The repeat interval unit. The only intervals that are valid for this type of trigger are
 
-             <see cref="F:Quartz.IntervalUnit.Second"/>, <see cref="F:Quartz.IntervalUnit.Minute"/>, and <see cref="F:Quartz.IntervalUnit.Hour"/>.</param>
 
-             <param name="repeatInterval"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.#ctor(System.String,System.String,Quartz.TimeOfDay,Quartz.TimeOfDay,Quartz.IntervalUnit,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> that will occur immediately, and
 
-             repeat at the the given interval.
 
-             </summary>
 
-             <param name="name"></param>
 
-             <param name="group"></param>
 
-             <param name="startTimeOfDayUtc">The <see cref="T:Quartz.TimeOfDay"/> that the repeating should begin occurring.</param>
 
-             <param name="endTimeOfDayUtc">The <see cref="T:Quartz.TimeOfDay"/> that the repeating should stop occurring.</param>
 
-             <param name="intervalUnit">The repeat interval unit. The only intervals that are valid for this type of trigger are
 
-             <see cref="F:Quartz.IntervalUnit.Second"/>, <see cref="F:Quartz.IntervalUnit.Minute"/>, and <see cref="F:Quartz.IntervalUnit.Hour"/>.</param>
 
-             <param name="repeatInterval"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.#ctor(System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},Quartz.TimeOfDay,Quartz.TimeOfDay,Quartz.IntervalUnit,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> that will occur at the given time,
 
-             and repeat at the the given interval until the given end time.
 
-             </summary>
 
-             <param name="name"></param>
 
-             <param name="startTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/>to fire.</param>
 
-             <param name="endTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/>to quit repeat firing.</param>
 
-             <param name="startTimeOfDayUtc">The <see cref="T:Quartz.TimeOfDay"/> that the repeating should begin occurring.</param>
 
-             <param name="endTimeOfDayUtc">The <see cref="T:Quartz.TimeOfDay"/> that the repeating should stop occurring.</param>
 
-             <param name="intervalUnit">The repeat interval unit. The only intervals that are valid for this type of trigger are
 
-             <see cref="F:Quartz.IntervalUnit.Second"/>, <see cref="F:Quartz.IntervalUnit.Minute"/>, and <see cref="F:Quartz.IntervalUnit.Hour"/>.</param>
 
-             <param name="repeatInterval">The number of milliseconds to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.#ctor(System.String,System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},Quartz.TimeOfDay,Quartz.TimeOfDay,Quartz.IntervalUnit,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> that will occur at the given time,
 
-             and repeat at the the given interval until the given end time.
 
-             </summary>
 
-             <param name="name"></param>
 
-             <param name="group"></param>
 
-             <param name="startTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/>to fire.</param>
 
-             <param name="endTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/>to quit repeat firing.</param>
 
-             <param name="startTimeOfDayUtc">The <see cref="T:Quartz.TimeOfDay"/> that the repeating should begin occurring.</param>
 
-             <param name="endTimeOfDayUtc">The <see cref="T:Quartz.TimeOfDay"/> that the repeating should stop occurring.</param>
 
-             <param name="intervalUnit">The repeat interval unit. The only intervals that are valid for this type of trigger are
 
-             <see cref="F:Quartz.IntervalUnit.Second"/>, <see cref="F:Quartz.IntervalUnit.Minute"/>, and <see cref="F:Quartz.IntervalUnit.Hour"/>.</param>
 
-             <param name="repeatInterval">The number of milliseconds to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.#ctor(System.String,System.String,System.String,System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},Quartz.TimeOfDay,Quartz.TimeOfDay,Quartz.IntervalUnit,System.Int32)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> that will occur at the given time,
 
-             fire the identified job and repeat at the the given
 
-             interval until the given end time.
 
-             </summary>
 
-             <param name="name"></param>
 
-             <param name="group"></param>
 
-             <param name="jobName"></param>
 
-             <param name="jobGroup"></param>
 
-             <param name="startTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/>to fire.</param>
 
-             <param name="endTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/>to quit repeat firing.</param>
 
-             <param name="startTimeOfDayUtc">The <see cref="T:Quartz.TimeOfDay"/> that the repeating should begin occurring.</param>
 
-             <param name="endTimeOfDayUtc">The <see cref="T:Quartz.TimeOfDay"/> that the repeating should stop occurring.</param>
 
-             <param name="intervalUnit">The repeat interval unit. The only intervals that are valid for this type of trigger are
 
-             <see cref="F:Quartz.IntervalUnit.Second"/>, <see cref="F:Quartz.IntervalUnit.Minute"/>, and <see cref="F:Quartz.IntervalUnit.Hour"/>.</param>
 
-             <param name="repeatInterval">The number of milliseconds to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.UpdateAfterMisfire(Quartz.ICalendar)">
 
-             <summary> 
 
-             Updates the <see cref="T:Quartz.ICalendarIntervalTrigger"/>'s state based on the
 
-             MisfireInstruction.XXX that was selected when the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/>
 
-             was created.
 
-             </summary>
 
-             <remarks>
 
-             If the misfire instruction is set to <see cref="F:Quartz.MisfireInstruction.SmartPolicy"/>,
 
-             then the following scheme will be used:
 
-             <ul>
 
-                 <li>The instruction will be interpreted as <see cref="F:Quartz.MisfireInstruction.DailyTimeIntervalTrigger.FireOnceNow"/></li>
 
-             </ul>
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.Triggered(Quartz.ICalendar)">
 
-             <summary>
 
-             Called when the scheduler has decided to 'fire'
 
-             the trigger (execute the associated job), in order to
 
-             give the trigger a chance to update itself for its next
 
-             triggering (if any).
 
-             </summary>
 
-             <param name="calendar"></param>
 
-             <see cref="M:Quartz.Impl.Triggers.AbstractTrigger.ExecutionComplete(Quartz.IJobExecutionContext,Quartz.JobExecutionException)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.UpdateWithNewCalendar(Quartz.ICalendar,System.TimeSpan)">
 
-             <summary>
 
-             
 
-             </summary>
 
-             <param name="calendar"></param>
 
-             <param name="misfireThreshold"></param>
 
-             <see cref="M:Quartz.Impl.Triggers.AbstractTrigger.UpdateWithNewCalendar(Quartz.ICalendar,System.TimeSpan)"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.ComputeFirstFireTimeUtc(Quartz.ICalendar)">
 
-             <summary>
 
-             This method should not be used by the Quartz client.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             Called by the scheduler at the time a <see cref="T:Quartz.ITrigger"/> is first
 
-             added to the scheduler, in order to have the <see cref="T:Quartz.ITrigger"/>
 
-             compute its first fire time, based on any associated calendar.
 
-             </para>
 
-             
 
-             <para>
 
-             After this method has been called, <see cref="M:Quartz.ITrigger.GetNextFireTimeUtc"/>
 
-             should return a valid answer.
 
-             </para>
 
-             </remarks>
 
-             <returns> 
 
-             The first time at which the <see cref="T:Quartz.ITrigger"/> will be fired
 
-             by the scheduler, which is also the same value <see cref="M:Quartz.ITrigger.GetNextFireTimeUtc"/>
 
-             will return (until after the first firing of the <see cref="T:Quartz.ITrigger"/>).
 
-             </returns>        
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.GetNextFireTimeUtc">
 
-              <summary>
 
-              Returns the next time at which the <see cref="T:Quartz.ITrigger"/> is scheduled to fire. If
 
-              the trigger will not fire again, <see langword="null"/> will be returned.  Note that
 
-              the time returned can possibly be in the past, if the time that was computed
 
-              for the trigger to next fire has already arrived, but the scheduler has not yet
 
-              been able to fire the trigger (which would likely be due to lack of resources
 
-              e.g. threads).
 
-              </summary>
 
-             <remarks>
 
-              The value returned is not guaranteed to be valid until after the <see cref="T:Quartz.ITrigger"/>
 
-              has been added to the scheduler.
 
-              </remarks>
 
-              <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.GetPreviousFireTimeUtc">
 
-             <summary>
 
-             Returns the previous time at which the <see cref="T:Quartz.ICalendarIntervalTrigger"/> fired.
 
-             If the trigger has not yet fired, <see langword="null"/> will be returned.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.SetNextFireTimeUtc(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Set the next time at which the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> should fire.
 
-             </summary>
 
-             <remarks>
 
-             This method should not be invoked by client code.
 
-             </remarks>
 
-             <param name="value"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.SetPreviousFireTimeUtc(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Set the previous time at which the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> fired.
 
-             </summary>
 
-             <remarks>
 
-             This method should not be invoked by client code.
 
-             </remarks>
 
-             <param name="previousFireTimeUtc"></param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.GetFireTimeAfter(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Returns the next time at which the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> will
 
-             fire, after the given time. If the trigger will not fire after the given
 
-             time, <see langword="null"/> will be returned.
 
-             </summary>
 
-             <param name="afterTime"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.AdvanceToNextDayOfWeekIfNecessary(System.DateTimeOffset,System.Boolean)">
 
-             <summary>
 
-             Given fireTime time determine if it is on a valid day of week. If so, simply return it unaltered,
 
-             if not, advance to the next valid week day, and set the time of day to the start time of day.
 
-             </summary>
 
-             <param name="fireTime">given next fireTime.</param>
 
-             <param name="forceToAdvanceNextDay">flag to whether to advance day without check existing week day. This scenario
 
-             can happen when a caller determine fireTime has passed the endTimeOfDay that fireTime should move to next day anyway.
 
-             </param>
 
-             <returns>a next day fireTime.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.GetMayFireAgain">
 
-             <summary>
 
-             Determines whether or not the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> will occur
 
-             again.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.Validate">
 
-             <summary>
 
-             Validates whether the properties of the <see cref="T:Quartz.IJobDetail"/> are
 
-             valid for submission into a <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.GetScheduleBuilder">
 
-             <summary>
 
-             Get a <see cref="T:Quartz.IScheduleBuilder"/> that is configured to produce a 
 
-             schedule identical to this trigger's schedule.
 
-             </summary>
 
-             <returns></returns>
 
-             <see cref="T:Quartz.TriggerBuilder"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.StartTimeUtc">
 
-             <summary>
 
-             The time at which the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> should occur.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.EndTimeUtc">
 
-             <summary>
 
-             the time at which the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> should quit repeating.
 
-             </summary>
 
-             <see cref="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.FinalFireTimeUtc"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.RepeatCount">
 
-             <summary>
 
-             Get the the number of times for interval this trigger should repeat, 
 
-             after which it will be automatically deleted.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.RepeatIntervalUnit">
 
-             <summary>
 
-             the interval unit - the time unit on with the interval applies.
 
-             </summary>
 
-             <remarks>
 
-             The repeat interval unit. The only intervals that are valid for this type of trigger are
 
-             <see cref="F:Quartz.IntervalUnit.Second"/>, <see cref="F:Quartz.IntervalUnit.Minute"/>, and <see cref="F:Quartz.IntervalUnit.Hour"/>.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.RepeatInterval">
 
-             <summary>
 
-             the the time interval that will be added to the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/>'s
 
-             fire time (in the set repeat interval unit) in order to calculate the time of the
 
-             next trigger repeat.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.TimesTriggered">
 
-             <summary>
 
-             the number of times the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> has already
 
-             fired.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.FinalFireTimeUtc">
 
-             <summary>
 
-             Returns the final time at which the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> will
 
-             fire, if there is no end time set, null will be returned.
 
-             </summary>
 
-             <remarks>Note that the return time may be in the past.</remarks>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.DaysOfWeek">
 
-             <summary>
 
-             The days of the week upon which to fire.
 
-             </summary>
 
-             <returns>
 
-             A Set containing the integers representing the days of the week, per the values 0-6 as defined by
 
-             DayOfWees.Sunday - DayOfWeek.Saturday. 
 
-             </returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.StartTimeOfDay">
 
-             <summary>
 
-             The time of day to start firing at the given interval.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.EndTimeOfDay">
 
-             <summary>
 
-             The time of day to complete firing at the given interval.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.HasAdditionalProperties">
 
-             <summary>
 
-             This trigger has no additional properties besides what's defined in this class.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.DailyTimeIntervalTriggerImpl.HasMillisecondPrecision">
 
-             <summary>
 
-             Tells whether this Trigger instance can handle events
 
-             in millisecond precision.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.Triggers.SimpleTriggerImpl">
 
-             <summary> 
 
-             A concrete <see cref="T:Quartz.ITrigger"/> that is used to fire a <see cref="T:Quartz.IJobDetail"/>
 
-             at a given moment in time, and optionally repeated at a specified interval.
 
-             </summary>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <seealso cref="T:Quartz.ICronTrigger"/>
 
-             <author>James House</author>
 
-             <author>Contributions by Lieven Govaerts of Ebitec Nv, Belgium.</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.ISimpleTrigger">
 
-             <summary> 
 
-             A <see cref="T:Quartz.ITrigger"/> that is used to fire a <see cref="T:Quartz.IJob"/>
 
-             at a given moment in time, and optionally repeated at a specified interval.
 
-             </summary>
 
-             <seealso cref="T:Quartz.TriggerBuilder"/>
 
-             <seealso cref="T:Quartz.SimpleScheduleBuilder"/>
 
-             <author>James House</author>
 
-             <author>Contributions by Lieven Govaerts of Ebitec Nv, Belgium.</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="P:Quartz.ISimpleTrigger.RepeatCount">
 
-             <summary>
 
-             Get or set the number of times the <see cref="T:Quartz.ISimpleTrigger"/> should
 
-             repeat, after which it will be automatically deleted.
 
-             </summary>
 
-             <seealso cref="F:Quartz.Impl.Triggers.SimpleTriggerImpl.RepeatIndefinitely"/>
 
-         </member>
 
-         <member name="P:Quartz.ISimpleTrigger.RepeatInterval">
 
-             <summary>
 
-             Get or set the the time interval at which the <see cref="T:Quartz.ISimpleTrigger"/> should repeat.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ISimpleTrigger.TimesTriggered">
 
-             <summary>
 
-             Get or set the number of times the <see cref="T:Quartz.ISimpleTrigger"/> has already
 
-             fired.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Impl.Triggers.SimpleTriggerImpl.RepeatIndefinitely">
 
-             <summary>
 
-             Used to indicate the 'repeat count' of the trigger is indefinite. Or in
 
-             other words, the trigger should repeat continually until the trigger's
 
-             ending timestamp.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.#ctor">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> with no settings.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.#ctor(System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> that will occur immediately, and
 
-             not repeat.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.#ctor(System.String,System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> that will occur immediately, and
 
-             not repeat.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.#ctor(System.String,System.Int32,System.TimeSpan)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> that will occur immediately, and
 
-             repeat at the the given interval the given number of times.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.#ctor(System.String,System.String,System.Int32,System.TimeSpan)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> that will occur immediately, and
 
-             repeat at the the given interval the given number of times.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.#ctor(System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> that will occur at the given time,
 
-             and not repeat.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.#ctor(System.String,System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> that will occur at the given time,
 
-             and not repeat.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.#ctor(System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},System.Int32,System.TimeSpan)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> that will occur at the given time,
 
-             and repeat at the the given interval the given number of times, or until
 
-             the given end time.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="startTimeUtc">A UTC <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/> to fire.</param>
 
-             <param name="endTimeUtc">A UTC <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/>
 
-             to quit repeat firing.</param>
 
-             <param name="repeatCount">The number of times for the <see cref="T:Quartz.ITrigger"/> to repeat
 
-             firing, use <see cref="F:Quartz.Impl.Triggers.SimpleTriggerImpl.RepeatIndefinitely"/> for unlimited times.</param>
 
-             <param name="repeatInterval">The time span to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.#ctor(System.String,System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},System.Int32,System.TimeSpan)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> that will occur at the given time,
 
-             and repeat at the the given interval the given number of times, or until
 
-             the given end time.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="group">The group.</param>
 
-             <param name="startTimeUtc">A UTC <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/> to fire.</param>
 
-             <param name="endTimeUtc">A UTC <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/>
 
-             to quit repeat firing.</param>
 
-             <param name="repeatCount">The number of times for the <see cref="T:Quartz.ITrigger"/> to repeat
 
-             firing, use <see cref="F:Quartz.Impl.Triggers.SimpleTriggerImpl.RepeatIndefinitely"/> for unlimited times.</param>
 
-             <param name="repeatInterval">The time span to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.#ctor(System.String,System.String,System.String,System.String,System.DateTimeOffset,System.Nullable{System.DateTimeOffset},System.Int32,System.TimeSpan)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> that will occur at the given time,
 
-             fire the identified <see cref="T:Quartz.IJob"/> and repeat at the the given
 
-             interval the given number of times, or until the given end time.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="group">The group.</param>
 
-             <param name="jobName">Name of the job.</param>
 
-             <param name="jobGroup">The job group.</param>
 
-             <param name="startTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/>
 
-             to fire.</param>
 
-             <param name="endTimeUtc">A <see cref="T:System.DateTimeOffset"/> set to the time for the <see cref="T:Quartz.ITrigger"/>
 
-             to quit repeat firing.</param>
 
-             <param name="repeatCount">The number of times for the <see cref="T:Quartz.ITrigger"/> to repeat
 
-             firing, use RepeatIndefinitely for unlimited times.</param>
 
-             <param name="repeatInterval">The time span to pause between the repeat firing.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.ValidateMisfireInstruction(System.Int32)">
 
-             <summary>
 
-             Validates the misfire instruction.
 
-             </summary>
 
-             <param name="misfireInstruction">The misfire instruction.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.UpdateAfterMisfire(Quartz.ICalendar)">
 
-             <summary>
 
-             Updates the <see cref="T:Quartz.ISimpleTrigger"/>'s state based on the
 
-             MisfireInstruction value that was selected when the <see cref="T:Quartz.ISimpleTrigger"/>
 
-             was created.
 
-             </summary>
 
-             <remarks>
 
-             If MisfireSmartPolicyEnabled is set to true,
 
-             then the following scheme will be used: <br/>
 
-             <ul>
 
-             <li>If the Repeat Count is 0, then the instruction will
 
-             be interpreted as <see cref="F:Quartz.MisfireInstruction.SimpleTrigger.FireNow"/>.</li>
 
-             <li>If the Repeat Count is <see cref="F:Quartz.Impl.Triggers.SimpleTriggerImpl.RepeatIndefinitely"/>, then
 
-             the instruction will be interpreted as <see cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNowWithRemainingRepeatCount"/>.
 
-             <b>WARNING:</b> using MisfirePolicy.SimpleTrigger.RescheduleNowWithRemainingRepeatCount 
 
-             with a trigger that has a non-null end-time may cause the trigger to 
 
-             never fire again if the end-time arrived during the misfire time span. 
 
-             </li>
 
-             <li>If the Repeat Count is > 0, then the instruction
 
-             will be interpreted as <see cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNowWithExistingRepeatCount"/>.
 
-             </li>
 
-             </ul>
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.Triggered(Quartz.ICalendar)">
 
-             <summary>
 
-             Called when the <see cref="T:Quartz.IScheduler"/> has decided to 'fire'
 
-             the trigger (Execute the associated <see cref="T:Quartz.IJob"/>), in order to
 
-             give the <see cref="T:Quartz.ITrigger"/> a chance to update itself for its next
 
-             triggering (if any).
 
-             </summary>
 
-             <seealso cref="T:Quartz.JobExecutionException"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.UpdateWithNewCalendar(Quartz.ICalendar,System.TimeSpan)">
 
-             <summary>
 
-             Updates the instance with new calendar.
 
-             </summary>
 
-             <param name="calendar">The calendar.</param>
 
-             <param name="misfireThreshold">The misfire threshold.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.ComputeFirstFireTimeUtc(Quartz.ICalendar)">
 
-             <summary>
 
-             Called by the scheduler at the time a <see cref="T:Quartz.ITrigger"/> is first
 
-             added to the scheduler, in order to have the <see cref="T:Quartz.ITrigger"/>
 
-             compute its first fire time, based on any associated calendar.
 
-             <para>
 
-             After this method has been called, <see cref="M:Quartz.Impl.Triggers.SimpleTriggerImpl.GetNextFireTimeUtc"/>
 
-             should return a valid answer.
 
-             </para>
 
-             </summary>
 
-             <returns> 
 
-             The first time at which the <see cref="T:Quartz.ITrigger"/> will be fired
 
-             by the scheduler, which is also the same value <see cref="M:Quartz.Impl.Triggers.SimpleTriggerImpl.GetNextFireTimeUtc"/>
 
-             will return (until after the first firing of the <see cref="T:Quartz.ITrigger"/>).
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.GetNextFireTimeUtc">
 
-             <summary>
 
-             Returns the next time at which the <see cref="T:Quartz.ISimpleTrigger"/> will
 
-             fire. If the trigger will not fire again, <see langword="null"/> will be
 
-             returned. The value returned is not guaranteed to be valid until after
 
-             the <see cref="T:Quartz.ITrigger"/> has been added to the scheduler.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.GetPreviousFireTimeUtc">
 
-             <summary>
 
-             Returns the previous time at which the <see cref="T:Quartz.ISimpleTrigger"/> fired.
 
-             If the trigger has not yet fired, <see langword="null"/> will be
 
-             returned.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.GetFireTimeAfter(System.Nullable{System.DateTimeOffset})">
 
-             <summary> 
 
-             Returns the next UTC time at which the <see cref="T:Quartz.ISimpleTrigger"/> will
 
-             fire, after the given UTC time. If the trigger will not fire after the given
 
-             time, <see langword="null"/> will be returned.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.GetFireTimeBefore(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Returns the last UTC time at which the <see cref="T:Quartz.ISimpleTrigger"/> will
 
-             fire, before the given time. If the trigger will not fire before the
 
-             given time, <see langword="null"/> will be returned.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.ComputeNumTimesFiredBetween(System.Nullable{System.DateTimeOffset},System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Computes the number of times fired between the two UTC date times.
 
-             </summary>
 
-             <param name="startTimeUtc">The UTC start date and time.</param>
 
-             <param name="endTimeUtc">The UTC end date and time.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.GetMayFireAgain">
 
-             <summary> 
 
-             Determines whether or not the <see cref="T:Quartz.ISimpleTrigger"/> will occur
 
-             again.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.Triggers.SimpleTriggerImpl.Validate">
 
-             <summary>
 
-             Validates whether the properties of the <see cref="T:Quartz.IJobDetail"/> are
 
-             valid for submission into a <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.SimpleTriggerImpl.RepeatCount">
 
-             <summary>
 
-             Get or set the number of times the <see cref="T:Quartz.Impl.Triggers.SimpleTriggerImpl"/> should
 
-             repeat, after which it will be automatically deleted.
 
-             </summary>
 
-             <seealso cref="F:Quartz.Impl.Triggers.SimpleTriggerImpl.RepeatIndefinitely"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.SimpleTriggerImpl.RepeatInterval">
 
-             <summary>
 
-             Get or set the the time interval at which the <see cref="T:Quartz.ISimpleTrigger"/> should repeat.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.SimpleTriggerImpl.TimesTriggered">
 
-             <summary>
 
-             Get or set the number of times the <see cref="T:Quartz.ISimpleTrigger"/> has already
 
-             fired.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.SimpleTriggerImpl.FinalFireTimeUtc">
 
-             <summary> 
 
-             Returns the final UTC time at which the <see cref="T:Quartz.ISimpleTrigger"/> will
 
-             fire, if repeatCount is RepeatIndefinitely, null will be returned.
 
-             <para>
 
-             Note that the return time may be in the past.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.Triggers.SimpleTriggerImpl.HasMillisecondPrecision">
 
-             <summary>
 
-             Tells whether this Trigger instance can handle events
 
-             in millisecond precision.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.DefaultThreadExecutor">
 
-             <summary>
 
-             Schedules work on a newly spawned thread. This is the default Quartz behavior.
 
-             </summary>
 
-             <author>matt.accola</author>
 
-         </member>
 
-         <member name="T:Quartz.Spi.IThreadExecutor">
 
-              <summary>
 
-              Allows different strategies for scheduling threads. The <see cref="M:Quartz.Spi.IThreadExecutor.Initialize"/>
 
-              method is required to be called before the first call to
 
-              <see cref="M:Quartz.Spi.IThreadExecutor.Execute(Quartz.QuartzThread)"/>. The Thread containing the work to be performed is
 
-              passed to execute and the work is scheduled by the underlying implementation.
 
-             </summary>
 
-              <author>matt.accola</author> 
 
-         </member>
 
-         <member name="M:Quartz.Spi.IThreadExecutor.Execute(Quartz.QuartzThread)">
 
-             <summary>
 
-             Submit a task for execution.
 
-             </summary>
 
-             <param name="thread">Thread to execute.</param>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IThreadExecutor.Initialize">
 
-             <summary>
 
-             Initialize any state prior to calling <see cref="M:Quartz.Spi.IThreadExecutor.Execute(Quartz.QuartzThread)"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.DirectSchedulerFactory">
 
-             <summary>
 
-             A singleton implementation of <see cref="T:Quartz.ISchedulerFactory"/>.
 
-             </summary>
 
-             <remarks>
 
-             Here are some examples of using this class:
 
-             <para>
 
-             To create a scheduler that does not write anything to the database (is not
 
-             persistent), you can call <see cref="M:Quartz.Impl.DirectSchedulerFactory.CreateVolatileScheduler(System.Int32)"/>:
 
-             </para>
 
-             <code>
 
-             DirectSchedulerFactory.Instance.CreateVolatileScheduler(10); // 10 threads 
 
-             // don't forget to start the scheduler: 
 
-             DirectSchedulerFactory.Instance.GetScheduler().Start();
 
-             </code>
 
-             <para>
 
-             Several create methods are provided for convenience. All create methods
 
-             eventually end up calling the create method with all the parameters:
 
-             </para>
 
-             <code>
 
-             public void CreateScheduler(string schedulerName, string schedulerInstanceId, IThreadPool threadPool, IJobStore jobStore)
 
-             </code>
 
-             <para>
 
-             Here is an example of using this method:
 
-             </para>
 
-             <code>
 
-             // create the thread pool 
 
-             SimpleThreadPool threadPool = new SimpleThreadPool(maxThreads, ThreadPriority.Normal); 
 
-             threadPool.Initialize(); 
 
-             // create the job store 
 
-             JobStore jobStore = new RAMJobStore(); 
 
-             
 
-             DirectSchedulerFactory.Instance.CreateScheduler("My Quartz Scheduler", "My Instance", threadPool, jobStore); 
 
-             // don't forget to start the scheduler: 
 
-             DirectSchedulerFactory.Instance.GetScheduler("My Quartz Scheduler", "My Instance").Start();
 
-             </code>
 
-             </remarks>>
 
-             <author>Mohammad Rezaei</author>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-             <seealso cref="T:Quartz.Spi.IJobStore"/>
 
-             <seealso cref="T:System.Threading.ThreadPool"/>
 
-         </member>
 
-         <member name="T:Quartz.ISchedulerFactory">
 
-             <summary>
 
-             Provides a mechanism for obtaining client-usable handles to <see cref="T:Quartz.IScheduler"/>
 
-             instances.
 
-             </summary>
 
-             <seealso cref="T:Quartz.IScheduler"/>
 
-             <seealso cref="T:Quartz.Impl.StdSchedulerFactory"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerFactory.GetScheduler">
 
-             <summary>
 
-             Returns a client-usable handle to a <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ISchedulerFactory.GetScheduler(System.String)">
 
-             <summary>
 
-             Returns a handle to the Scheduler with the given name, if it exists.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.ISchedulerFactory.AllSchedulers">
 
-             <summary>
 
-             Returns handles to all known Schedulers (made by any SchedulerFactory
 
-             within this app domain.).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.DirectSchedulerFactory"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.CreateVolatileScheduler(System.Int32)">
 
-             <summary>
 
-             Creates an in memory job store (<see cref="T:Quartz.Simpl.RAMJobStore"/>)
 
-             The thread priority is set to Thread.NORM_PRIORITY
 
-             </summary>
 
-             <param name="maxThreads">The number of threads in the thread pool</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.CreateRemoteScheduler(System.String)">
 
-             <summary>
 
-             Creates a proxy to a remote scheduler. This scheduler can be retrieved
 
-             via <see cref="M:Quartz.Impl.DirectSchedulerFactory.GetScheduler"/>.
 
-             </summary>
 
-             <throws>  SchedulerException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.CreateRemoteScheduler(System.String,System.String,System.String)">
 
-             <summary>
 
-             Same as <see cref="M:Quartz.Impl.DirectSchedulerFactory.CreateRemoteScheduler(System.String)"/>,
 
-             with the addition of specifying the scheduler name and instance ID. This
 
-             scheduler can only be retrieved via <see cref="M:Quartz.Impl.DirectSchedulerFactory.GetScheduler(System.String)"/>.
 
-             </summary>
 
-             <param name="schedulerName">The name for the scheduler.</param>
 
-             <param name="schedulerInstanceId">The instance ID for the scheduler.</param>
 
-             <param name="proxyAddress"></param>
 
-             <throws>  SchedulerException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.CreateScheduler(Quartz.Spi.IThreadPool,Quartz.Spi.IJobStore)">
 
-             <summary> 
 
-             Creates a scheduler using the specified thread pool and job store. This
 
-             scheduler can be retrieved via DirectSchedulerFactory#GetScheduler()
 
-             </summary>
 
-             <param name="threadPool">
 
-             The thread pool for executing jobs
 
-             </param>
 
-             <param name="jobStore">
 
-             The type of job store
 
-             </param>
 
-             <throws>  SchedulerException </throws>
 
-             <summary>           if initialization failed
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.CreateScheduler(System.String,System.String,Quartz.Spi.IThreadPool,Quartz.Spi.IJobStore)">
 
-             <summary>
 
-             Same as DirectSchedulerFactory#createScheduler(ThreadPool threadPool, JobStore jobStore),
 
-             with the addition of specifying the scheduler name and instance ID. This
 
-             scheduler can only be retrieved via DirectSchedulerFactory#getScheduler(String)
 
-             </summary>
 
-             <param name="schedulerName">The name for the scheduler.</param>
 
-             <param name="schedulerInstanceId">The instance ID for the scheduler.</param>
 
-             <param name="threadPool">The thread pool for executing jobs</param>
 
-             <param name="jobStore">The type of job store</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.CreateScheduler(System.String,System.String,Quartz.Spi.IThreadPool,Quartz.Spi.IJobStore,System.TimeSpan,System.TimeSpan)">
 
-             <summary>
 
-             Creates a scheduler using the specified thread pool and job store and
 
-             binds it for remote access.
 
-             </summary>
 
-             <param name="schedulerName">The name for the scheduler.</param>
 
-             <param name="schedulerInstanceId">The instance ID for the scheduler.</param>
 
-             <param name="threadPool">The thread pool for executing jobs</param>
 
-             <param name="jobStore">The type of job store</param>
 
-             <param name="idleWaitTime">The idle wait time. You can specify "-1" for
 
-             the default value, which is currently 30000 ms.</param>
 
-             <param name="dbFailureRetryInterval">The db failure retry interval.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.CreateScheduler(System.String,System.String,Quartz.Spi.IThreadPool,Quartz.Spi.IJobStore,System.Collections.Generic.IDictionary{System.String,Quartz.Spi.ISchedulerPlugin},System.TimeSpan,System.TimeSpan)">
 
-             <summary>
 
-             Creates a scheduler using the specified thread pool and job store and
 
-             binds it for remote access.
 
-             </summary>
 
-             <param name="schedulerName">The name for the scheduler.</param>
 
-             <param name="schedulerInstanceId">The instance ID for the scheduler.</param>
 
-             <param name="threadPool">The thread pool for executing jobs</param>
 
-             <param name="jobStore">The type of job store</param>
 
-             <param name="schedulerPluginMap"></param>
 
-             <param name="idleWaitTime">The idle wait time. You can specify TimeSpan.Zero for
 
-             the default value, which is currently 30000 ms.</param>
 
-             <param name="dbFailureRetryInterval">The db failure retry interval.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.CreateScheduler(System.String,System.String,Quartz.Spi.IThreadPool,Quartz.Spi.IThreadExecutor,Quartz.Spi.IJobStore,System.Collections.Generic.IDictionary{System.String,Quartz.Spi.ISchedulerPlugin},System.TimeSpan,System.TimeSpan)">
 
-             <summary>
 
-             Creates a scheduler using the specified thread pool and job store and
 
-             binds it for remote access.
 
-             </summary>
 
-             <param name="schedulerName">The name for the scheduler.</param>
 
-             <param name="schedulerInstanceId">The instance ID for the scheduler.</param>
 
-             <param name="threadPool">The thread pool for executing jobs</param>
 
-             <param name="threadExecutor">Thread executor.</param>
 
-             <param name="jobStore">The type of job store</param>
 
-             <param name="schedulerPluginMap"></param>
 
-             <param name="idleWaitTime">The idle wait time. You can specify TimeSpan.Zero for
 
-             the default value, which is currently 30000 ms.</param>
 
-             <param name="dbFailureRetryInterval">The db failure retry interval.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.CreateScheduler(System.String,System.String,Quartz.Spi.IThreadPool,Quartz.Spi.IThreadExecutor,Quartz.Spi.IJobStore,System.Collections.Generic.IDictionary{System.String,Quartz.Spi.ISchedulerPlugin},System.TimeSpan,System.Int32,System.TimeSpan)">
 
-             <summary>
 
-             Creates a scheduler using the specified thread pool and job store and
 
-             binds it for remote access.
 
-             </summary>
 
-             <param name="schedulerName">The name for the scheduler.</param>
 
-             <param name="schedulerInstanceId">The instance ID for the scheduler.</param>
 
-             <param name="threadPool">The thread pool for executing jobs</param>
 
-             <param name="threadExecutor">Thread executor.</param>
 
-             <param name="jobStore">The type of job store</param>
 
-             <param name="schedulerPluginMap"></param>
 
-             <param name="idleWaitTime">The idle wait time. You can specify TimeSpan.Zero for
 
-                 the default value, which is currently 30000 ms.</param>
 
-             <param name="maxBatchSize">The maximum batch size of triggers, when acquiring them</param>
 
-             <param name="batchTimeWindow">The time window for which it is allowed to "pre-acquire" triggers to fire</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.CreateScheduler(System.String,System.String,Quartz.Spi.IThreadPool,Quartz.Spi.IThreadExecutor,Quartz.Spi.IJobStore,System.Collections.Generic.IDictionary{System.String,Quartz.Spi.ISchedulerPlugin},System.TimeSpan,System.Int32,System.TimeSpan,Quartz.Spi.ISchedulerExporter)">
 
-             <summary>
 
-             Creates a scheduler using the specified thread pool and job store and
 
-             binds it for remote access.
 
-             </summary>
 
-             <param name="schedulerName">The name for the scheduler.</param>
 
-             <param name="schedulerInstanceId">The instance ID for the scheduler.</param>
 
-             <param name="threadPool">The thread pool for executing jobs</param>
 
-             <param name="threadExecutor">Thread executor.</param>
 
-             <param name="jobStore">The type of job store</param>
 
-             <param name="schedulerPluginMap"></param>
 
-             <param name="idleWaitTime">The idle wait time. You can specify TimeSpan.Zero for
 
-                 the default value, which is currently 30000 ms.</param>
 
-             <param name="maxBatchSize">The maximum batch size of triggers, when acquiring them</param>
 
-             <param name="batchTimeWindow">The time window for which it is allowed to "pre-acquire" triggers to fire</param>
 
-             <param name="schedulerExporter">The scheduler exporter to use</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.GetScheduler">
 
-             <summary>
 
-             Returns a handle to the Scheduler produced by this factory.
 
-             <para>
 
-             you must call createRemoteScheduler or createScheduler methods before
 
-             calling getScheduler()
 
-             </para>
 
-             </summary>
 
-             <returns></returns>
 
-             <throws>  SchedulerException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Impl.DirectSchedulerFactory.GetScheduler(System.String)">
 
-             <summary>
 
-             Returns a handle to the Scheduler with the given name, if it exists.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.DirectSchedulerFactory.Log">
 
-             <summary>
 
-             Gets the log.
 
-             </summary>
 
-             <value>The log.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.DirectSchedulerFactory.Instance">
 
-             <summary>
 
-             Gets the instance.
 
-             </summary>
 
-             <value>The instance.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.DirectSchedulerFactory.AllSchedulers">
 
-             <summary> <para>
 
-             Returns a handle to all known Schedulers (made by any
 
-             StdSchedulerFactory instance.).
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.JobDetailImpl">
 
-             <summary>
 
-             Conveys the detail properties of a given job instance. 
 
-             </summary>
 
-             <remarks>
 
-             Quartz does not store an actual instance of a <see cref="T:Quartz.IJob"/> type, but
 
-             instead allows you to define an instance of one, through the use of a <see cref="T:Quartz.IJobDetail"/>.
 
-             <para>
 
-             <see cref="T:Quartz.IJob"/>s have a name and group associated with them, which
 
-             should uniquely identify them within a single <see cref="T:Quartz.IScheduler"/>.
 
-             </para>
 
-             <para>
 
-             <see cref="T:Quartz.ITrigger"/> s are the 'mechanism' by which <see cref="T:Quartz.IJob"/> s
 
-             are scheduled. Many <see cref="T:Quartz.ITrigger"/> s can point to the same <see cref="T:Quartz.IJob"/>,
 
-             but a single <see cref="T:Quartz.ITrigger"/> can only point to one <see cref="T:Quartz.IJob"/>.
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.DisallowConcurrentExecutionAttribute"/>
 
-             <seealso cref="T:Quartz.PersistJobDataAfterExecutionAttribute"/>
 
-             <seealso cref="P:Quartz.Impl.JobDetailImpl.JobDataMap"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.IJobDetail">
 
-             <summary>
 
-             Conveys the detail properties of a given job instance. 
 
-             JobDetails are to be created/defined with <see cref="T:Quartz.JobBuilder"/>.
 
-             </summary>
 
-             <remarks>
 
-             Quartz does not store an actual instance of a <see cref="T:Quartz.IJob"/> type, but
 
-             instead allows you to define an instance of one, through the use of a <see cref="T:Quartz.IJobDetail"/>.
 
-             <para>
 
-             <see cref="T:Quartz.IJob"/>s have a name and group associated with them, which
 
-             should uniquely identify them within a single <see cref="T:Quartz.IScheduler"/>.
 
-             </para>
 
-             <para>
 
-             <see cref="T:Quartz.ITrigger"/> s are the 'mechanism' by which <see cref="T:Quartz.IJob"/> s
 
-             are scheduled. Many <see cref="T:Quartz.ITrigger"/> s can point to the same <see cref="T:Quartz.IJob"/>,
 
-             but a single <see cref="T:Quartz.ITrigger"/> can only point to one <see cref="T:Quartz.IJob"/>.
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.DisallowConcurrentExecutionAttribute"/>
 
-             <seealso cref="T:Quartz.PersistJobDataAfterExecutionAttribute"/>
 
-             <seealso cref="T:Quartz.JobDataMap"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.IJobDetail.GetJobBuilder">
 
-             <summary>
 
-             Get a <see cref="T:Quartz.JobBuilder"/> that is configured to produce a 
 
-             <see cref="T:Quartz.IJobDetail"/> identical to this one.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobDetail.Key">
 
-             <summary>
 
-             The key that identifies this jobs uniquely.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobDetail.Description">
 
-             <summary>
 
-             Get or set the description given to the <see cref="T:Quartz.IJob"/> instance by its
 
-             creator (if any).
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobDetail.JobType">
 
-             <summary>
 
-             Get or sets the instance of <see cref="T:Quartz.IJob"/> that will be executed.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobDetail.JobDataMap">
 
-             <summary>
 
-             Get or set the <see cref="P:Quartz.IJobDetail.JobDataMap"/> that is associated with the <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobDetail.Durable">
 
-             <summary>
 
-             Whether or not the <see cref="T:Quartz.IJob"/> should remain stored after it is
 
-             orphaned (no <see cref="T:Quartz.ITrigger"/>s point to it).
 
-             </summary>
 
-             <remarks>
 
-             If not explicitly set, the default value is <see langword="false"/>.
 
-             </remarks>
 
-             <returns> 
 
-             <see langword="true"/> if the Job should remain persisted after being orphaned.
 
-             </returns>
 
-         </member>
 
-         <member name="P:Quartz.IJobDetail.PersistJobDataAfterExecution">
 
-             <summary>
 
-             Whether the associated Job class carries the <see cref="T:Quartz.PersistJobDataAfterExecutionAttribute"/>.
 
-             </summary>
 
-             <seealso cref="T:Quartz.PersistJobDataAfterExecutionAttribute"/>
 
-         </member>
 
-         <member name="P:Quartz.IJobDetail.ConcurrentExecutionDisallowed">
 
-             <summary>
 
-             Whether the associated Job class carries the <see cref="T:Quartz.DisallowConcurrentExecutionAttribute"/>.
 
-             </summary>
 
-             <seealso cref="T:Quartz.DisallowConcurrentExecutionAttribute"/>
 
-         </member>
 
-         <member name="P:Quartz.IJobDetail.RequestsRecovery">
 
-             <summary>
 
-             Set whether or not the the <see cref="T:Quartz.IScheduler"/> should re-Execute
 
-             the <see cref="T:Quartz.IJob"/> if a 'recovery' or 'fail-over' situation is
 
-             encountered.
 
-             </summary>
 
-             <remarks>
 
-             If not explicitly set, the default value is <see langword="false"/>.
 
-             </remarks>
 
-             <seealso cref="P:Quartz.IJobExecutionContext.Recovering"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.#ctor">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.IJobDetail"/> with no specified name or group, and
 
-             the default settings of all the other properties.
 
-             <para>
 
-             Note that the <see cref="P:Quartz.Impl.JobDetailImpl.Name"/>,<see cref="P:Quartz.Impl.JobDetailImpl.Group"/> and
 
-             <see cref="P:Quartz.Impl.JobDetailImpl.JobType"/> properties must be set before the job can be
 
-             placed into a <see cref="T:Quartz.IScheduler"/>.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.#ctor(System.String,System.Type)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.IJobDetail"/> with the given name, default group, and
 
-             the default settings of all the other properties.
 
-             If <see langword="null"/>, SchedulerConstants.DefaultGroup will be used.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException">
 
-             If name is null or empty, or the group is an empty string.
 
-             </exception>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.#ctor(System.String,System.String,System.Type)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.IJobDetail"/> with the given name, and group, and
 
-             the default settings of all the other properties.
 
-             If <see langword="null"/>, SchedulerConstants.DefaultGroup will be used.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException">
 
-             If name is null or empty, or the group is an empty string.
 
-             </exception>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.#ctor(System.String,System.String,System.Type,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.IJobDetail"/> with the given name, and group, and
 
-             the given settings of all the other properties.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="group">if <see langword="null"/>, SchedulerConstants.DefaultGroup will be used.</param>
 
-             <param name="jobType">Type of the job.</param>
 
-             <param name="isDurable">if set to <c>true</c>, job will be durable.</param>
 
-             <param name="requestsRecovery">if set to <c>true</c>, job will request recovery.</param>
 
-             <exception cref="T:System.ArgumentException"> 
 
-             ArgumentException if name is null or empty, or the group is an empty string.
 
-             </exception>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.Validate">
 
-             <summary> 
 
-             Validates whether the properties of the <see cref="T:Quartz.IJobDetail"/> are
 
-             valid for submission into a <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.ToString">
 
-             <summary>
 
-             Return a simple string representation of this object.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.Clone">
 
-             <summary>
 
-             Creates a new object that is a copy of the current instance.
 
-             </summary>
 
-             <returns>
 
-             A new object that is a copy of this instance.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.IsEqual(Quartz.Impl.JobDetailImpl)">
 
-             <summary>
 
-             Determines whether the specified detail is equal to this instance.
 
-             </summary>
 
-             <param name="detail">The detail to examine.</param>
 
-             <returns>
 
-             	<c>true</c> if the specified detail is equal; otherwise, <c>false</c>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.Equals(System.Object)">
 
-             <summary>
 
-             Determines whether the specified <see cref="T:System.Object"/> is equal to the current <see cref="T:System.Object"/>.
 
-             </summary>
 
-             <param name="obj">The <see cref="T:System.Object"/> to compare with the current <see cref="T:System.Object"/>.</param>
 
-             <returns>
 
-             	<see langword="true"/> if the specified <see cref="T:System.Object"/> is equal to the
 
-             current <see cref="T:System.Object"/>; otherwise, <see langword="false"/>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.Equals(Quartz.Impl.JobDetailImpl)">
 
-             <summary>
 
-             Checks equality between given job detail and this instance.
 
-             </summary>
 
-             <param name="detail">The detail to compare this instance with.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobDetailImpl.GetHashCode">
 
-             <summary>
 
-             Serves as a hash function for a particular type, suitable
 
-             for use in hashing algorithms and data structures like a hash table.
 
-             </summary>
 
-             <returns>
 
-             A hash code for the current <see cref="T:System.Object"/>.
 
-             </returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.Name">
 
-             <summary>
 
-             Get or sets the name of this <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException"> 
 
-             if name is null or empty.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.Group">
 
-             <summary>
 
-             Get or sets the group of this <see cref="T:Quartz.IJob"/>. 
 
-             If <see langword="null"/>, <see cref="F:Quartz.SchedulerConstants.DefaultGroup"/> will be used.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException"> 
 
-             If the group is an empty string.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.FullName">
 
-             <summary> 
 
-             Returns the 'full name' of the <see cref="T:Quartz.ITrigger"/> in the format
 
-             "group.name".
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.Key">
 
-             <summary>
 
-             Gets the key.
 
-             </summary>
 
-             <value>The key.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.Description">
 
-             <summary>
 
-             Get or set the description given to the <see cref="T:Quartz.IJob"/> instance by its
 
-             creator (if any).
 
-             </summary>
 
-             <remarks>
 
-             May be useful for remembering/displaying the purpose of the job, though the
 
-             description has no meaning to Quartz.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.JobType">
 
-             <summary>
 
-             Get or sets the instance of <see cref="T:Quartz.IJob"/> that will be executed.
 
-             </summary>
 
-             <exception cref="T:System.ArgumentException"> 
 
-             if jobType is null or the class is not a <see cref="T:Quartz.IJob"/>.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.JobDataMap">
 
-             <summary>
 
-             Get or set the <see cref="P:Quartz.Impl.JobDetailImpl.JobDataMap"/> that is associated with the <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.RequestsRecovery">
 
-             <summary>
 
-             Set whether or not the the <see cref="T:Quartz.IScheduler"/> should re-Execute
 
-             the <see cref="T:Quartz.IJob"/> if a 'recovery' or 'fail-over' situation is
 
-             encountered.
 
-             <para>
 
-             If not explicitly set, the default value is <see langword="false"/>.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="P:Quartz.IJobExecutionContext.Recovering"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.Durable">
 
-             <summary>
 
-             Whether or not the <see cref="T:Quartz.IJob"/> should remain stored after it is
 
-             orphaned (no <see cref="T:Quartz.ITrigger"/>s point to it).
 
-             <para>
 
-             If not explicitly set, the default value is <see langword="false"/>.
 
-             </para>
 
-             </summary>
 
-             <returns> 
 
-             <see langword="true"/> if the Job should remain persisted after
 
-             being orphaned.
 
-             </returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.PersistJobDataAfterExecution">
 
-             <summary>
 
-             Whether the associated Job class carries the <see cref="P:Quartz.Impl.JobDetailImpl.PersistJobDataAfterExecution"/> attribute.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobDetailImpl.ConcurrentExecutionDisallowed">
 
-             <summary>
 
-             Whether the associated Job class carries the <see cref="T:Quartz.DisallowConcurrentExecutionAttribute"/> attribute.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.JobExecutionContextImpl">
 
-             <summary>
 
-             A context bundle containing handles to various environment information, that
 
-             is given to a <see cref="P:Quartz.Impl.JobExecutionContextImpl.JobDetail"/> instance as it is
 
-             executed, and to a <see cref="T:Quartz.ITrigger"/> instance after the
 
-             execution completes.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The <see cref="T:Quartz.JobDataMap"/> found on this object (via the 
 
-             <see cref="P:Quartz.Impl.JobExecutionContextImpl.MergedJobDataMap"/> method) serves as a convenience -
 
-             it is a merge of the <see cref="T:Quartz.JobDataMap"/> found on the 
 
-             <see cref="P:Quartz.Impl.JobExecutionContextImpl.JobDetail"/> and the one found on the <see cref="T:Quartz.ITrigger"/>, with 
 
-             the value in the latter overriding any same-named values in the former.
 
-             <i>It is thus considered a 'best practice' that the Execute code of a Job
 
-             retrieve data from the JobDataMap found on this object</i> 
 
-             </para>
 
-             <para>
 
-             NOTE: Do not
 
-             expect value 'set' into this JobDataMap to somehow be set back onto a
 
-             job's own JobDataMap.
 
-             </para>
 
-             
 
-             <para>
 
-             <see cref="T:Quartz.IJobExecutionContext"/> s are also returned from the 
 
-             <see cref="M:Quartz.IScheduler.GetCurrentlyExecutingJobs"/>
 
-             method. These are the same instances as those past into the jobs that are
 
-             currently executing within the scheduler. The exception to this is when your
 
-             application is using Quartz remotely (i.e. via remoting or WCF) - in which case you get
 
-             a clone of the <see cref="T:Quartz.IJobExecutionContext"/>s, and their references to
 
-             the <see cref="T:Quartz.IScheduler"/> and <see cref="T:Quartz.IJob"/> instances have been lost (a
 
-             clone of the <see cref="P:Quartz.Impl.JobExecutionContextImpl.JobDetail"/> is still available - just not a handle
 
-             to the job instance that is running).
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="P:Quartz.Impl.JobExecutionContextImpl.JobDetail"/> 
 
-             <seealso cref="T:Quartz.IScheduler"/>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <seealso cref="T:Quartz.JobDataMap"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.IJobExecutionContext">
 
-             <summary>
 
-             A context bundle containing handles to various environment information, that
 
-             is given to a <see cref="P:Quartz.IJobExecutionContext.JobDetail"/> instance as it is
 
-             executed, and to a <see cref="T:Quartz.ITrigger"/> instance after the
 
-             execution completes.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IJobExecutionContext.Put(System.Object,System.Object)">
 
-             <summary> 
 
-             Put the specified value into the context's data map with the given key.
 
-             Possibly useful for sharing data between listeners and jobs.
 
-             <para>
 
-             NOTE: this data is volatile - it is lost after the job execution
 
-             completes, and all TriggerListeners and JobListeners have been 
 
-             notified.
 
-             </para> 
 
-             </summary>
 
-             <param name="key">
 
-             </param>
 
-             <param name="objectValue">
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.IJobExecutionContext.Get(System.Object)">
 
-             <summary> 
 
-             Get the value with the given key from the context's data map.
 
-             </summary>
 
-             <param name="key">
 
-             </param>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.Scheduler">
 
-             <summary>
 
-             Get a handle to the <see cref="T:Quartz.IScheduler"/> instance that fired the
 
-             <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.Trigger">
 
-             <summary>
 
-             Get a handle to the <see cref="T:Quartz.ITrigger"/> instance that fired the
 
-             <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.Calendar">
 
-             <summary>
 
-             Get a handle to the <see cref="T:Quartz.ICalendar"/> referenced by the <see cref="T:Quartz.ITrigger"/>
 
-             instance that fired the <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.Recovering">
 
-             <summary>
 
-             If the <see cref="T:Quartz.IJob"/> is being re-executed because of a 'recovery'
 
-             situation, this method will return <see langword="true"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.RecoveringTriggerKey">
 
-             <summary>
 
-             Returns the <see cref="T:Quartz.TriggerKey"/> of the originally scheduled and now recovering job.
 
-             </summary>
 
-             <remarks>
 
-             When recovering a previously failed job execution this property returns the identity
 
-             of the originally firing trigger. This recovering job will have been scheduled for 
 
-             the same firing time as the original job, and so is available via the
 
-             <see cref="P:Quartz.IJobExecutionContext.ScheduledFireTimeUtc"/> property. The original firing time of the job can be 
 
-             accessed via the <see cref="F:Quartz.SchedulerConstants.FailedJobOriginalTriggerFiretime"/>
 
-             element of this job's <see cref="T:Quartz.JobDataMap"/>.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.RefireCount">
 
-             <summary>
 
-             Gets the refire count.
 
-             </summary>
 
-             <value>The refire count.</value>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.MergedJobDataMap">
 
-             <summary>
 
-             Get the convenience <see cref="T:Quartz.JobDataMap"/> of this execution context.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The <see cref="T:Quartz.JobDataMap"/> found on this object serves as a convenience -
 
-             it is a merge of the <see cref="T:Quartz.JobDataMap"/> found on the 
 
-             <see cref="P:Quartz.IJobExecutionContext.JobDetail"/> and the one found on the <see cref="T:Quartz.ITrigger"/>, with 
 
-             the value in the latter overriding any same-named values in the former.
 
-             <i>It is thus considered a 'best practice' that the Execute code of a Job
 
-             retrieve data from the JobDataMap found on this object.</i>
 
-             </para>
 
-             <para>
 
-             NOTE: Do not expect value 'set' into this JobDataMap to somehow be 
 
-             set back onto a job's own JobDataMap.
 
-             </para>
 
-             <para>
 
-             Attempts to change the contents of this map typically result in an 
 
-             illegal state.
 
-             </para>
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.JobDetail">
 
-             <summary>
 
-             Get the <see cref="P:Quartz.IJobExecutionContext.JobDetail"/> associated with the <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.JobInstance">
 
-             <summary>
 
-             Get the instance of the <see cref="T:Quartz.IJob"/> that was created for this
 
-             execution.
 
-             <para>
 
-             Note: The Job instance is not available through remote scheduler
 
-             interfaces.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.FireTimeUtc">
 
-             <summary>
 
-             The actual time the trigger fired. For instance the scheduled time may
 
-             have been 10:00:00 but the actual fire time may have been 10:00:03 if
 
-             the scheduler was too busy.
 
-             </summary>
 
-             <returns> Returns the fireTimeUtc.</returns>
 
-             <seealso cref="P:Quartz.IJobExecutionContext.ScheduledFireTimeUtc"/>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.ScheduledFireTimeUtc">
 
-             <summary> 
 
-             The scheduled time the trigger fired for. For instance the scheduled
 
-             time may have been 10:00:00 but the actual fire time may have been
 
-             10:00:03 if the scheduler was too busy.
 
-             </summary>
 
-             <returns> Returns the scheduledFireTimeUtc.</returns>
 
-             <seealso cref="P:Quartz.IJobExecutionContext.FireTimeUtc"/>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.PreviousFireTimeUtc">
 
-             <summary>
 
-             Gets the previous fire time.
 
-             </summary>
 
-             <value>The previous fire time.</value>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.NextFireTimeUtc">
 
-             <summary>
 
-             Gets the next fire time.
 
-             </summary>
 
-             <value>The next fire time.</value>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.FireInstanceId">
 
-             <summary>
 
-             Get the unique Id that identifies this particular firing instance of the
 
-             trigger that triggered this job execution.  It is unique to this 
 
-             JobExecutionContext instance as well.
 
-             </summary>
 
-              <returns>the unique fire instance id</returns>
 
-             <seealso cref="M:Quartz.IScheduler.Interrupt(System.String)"/>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.Result">
 
-             <summary>
 
-             Returns the result (if any) that the <see cref="T:Quartz.IJob"/> set before its 
 
-             execution completed (the type of object set as the result is entirely up 
 
-             to the particular job).
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The result itself is meaningless to Quartz, but may be informative
 
-             to <see cref="T:Quartz.IJobListener"/>s or 
 
-             <see cref="T:Quartz.ITriggerListener"/>s that are watching the job's 
 
-             execution.
 
-             </para> 
 
-             
 
-             Set the result (if any) of the <see cref="T:Quartz.IJob"/>'s execution (the type of 
 
-             object set as the result is entirely up to the particular job).
 
-             
 
-             <para>
 
-             The result itself is meaningless to Quartz, but may be informative
 
-             to <see cref="T:Quartz.IJobListener"/>s or 
 
-             <see cref="T:Quartz.ITriggerListener"/>s that are watching the job's 
 
-             execution.
 
-             </para> 
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.IJobExecutionContext.JobRunTime">
 
-             <summary> 
 
-             The amount of time the job ran for.  The returned 
 
-             value will be <see cref="F:System.TimeSpan.MinValue"/> until the job has actually completed (or thrown an 
 
-             exception), and is therefore generally only useful to 
 
-             <see cref="T:Quartz.IJobListener"/>s and <see cref="T:Quartz.ITriggerListener"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobExecutionContextImpl.#ctor(Quartz.IScheduler,Quartz.Spi.TriggerFiredBundle,Quartz.IJob)">
 
-             <summary>
 
-             Create a JobExecutionContext with the given context data.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobExecutionContextImpl.IncrementRefireCount">
 
-             <summary>
 
-             Increments the refire count.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobExecutionContextImpl.ToString">
 
-             <summary>
 
-             Returns a <see cref="T:System.String"/> that represents the current <see cref="T:System.Object"/>.
 
-             </summary>
 
-             <returns>
 
-             A <see cref="T:System.String"/> that represents the current <see cref="T:System.Object"/>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobExecutionContextImpl.Put(System.Object,System.Object)">
 
-             <summary> 
 
-             Put the specified value into the context's data map with the given key.
 
-             Possibly useful for sharing data between listeners and jobs.
 
-             <para>
 
-             NOTE: this data is volatile - it is lost after the job execution
 
-             completes, and all TriggerListeners and JobListeners have been 
 
-             notified.
 
-             </para> 
 
-             </summary>
 
-             <param name="key">
 
-             </param>
 
-             <param name="objectValue">
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.JobExecutionContextImpl.Get(System.Object)">
 
-             <summary> 
 
-             Get the value with the given key from the context's data map.
 
-             </summary>
 
-             <param name="key">
 
-             </param>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.Scheduler">
 
-             <summary>
 
-             Get a handle to the <see cref="T:Quartz.IScheduler"/> instance that fired the
 
-             <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.Trigger">
 
-             <summary>
 
-             Get a handle to the <see cref="T:Quartz.ITrigger"/> instance that fired the
 
-             <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.Calendar">
 
-             <summary>
 
-             Get a handle to the <see cref="T:Quartz.ICalendar"/> referenced by the <see cref="T:Quartz.ITrigger"/>
 
-             instance that fired the <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.Recovering">
 
-             <summary>
 
-             If the <see cref="T:Quartz.IJob"/> is being re-executed because of a 'recovery'
 
-             situation, this method will return <see langword="true"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.RefireCount">
 
-             <summary>
 
-             Gets the refire count.
 
-             </summary>
 
-             <value>The refire count.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.MergedJobDataMap">
 
-             <summary>
 
-             Get the convenience <see cref="T:Quartz.JobDataMap"/> of this execution context.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The <see cref="T:Quartz.JobDataMap"/> found on this object serves as a convenience -
 
-             it is a merge of the <see cref="T:Quartz.JobDataMap"/> found on the 
 
-             <see cref="P:Quartz.Impl.JobExecutionContextImpl.JobDetail"/> and the one found on the <see cref="T:Quartz.ITrigger"/>, with 
 
-             the value in the latter overriding any same-named values in the former.
 
-             <i>It is thus considered a 'best practice' that the Execute code of a Job
 
-             retrieve data from the JobDataMap found on this object.</i>
 
-             </para>
 
-             <para>
 
-             NOTE: Do not expect value 'set' into this JobDataMap to somehow be 
 
-             set back onto a job's own JobDataMap.
 
-             </para>
 
-             <para>
 
-             Attempts to change the contents of this map typically result in an 
 
-             illegal state.
 
-             </para>
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.JobDetail">
 
-             <summary>
 
-             Get the <see cref="P:Quartz.Impl.JobExecutionContextImpl.JobDetail"/> associated with the <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.JobInstance">
 
-             <summary>
 
-             Get the instance of the <see cref="T:Quartz.IJob"/> that was created for this
 
-             execution.
 
-             <para>
 
-             Note: The Job instance is not available through remote scheduler
 
-             interfaces.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.FireTimeUtc">
 
-             <summary>
 
-             The actual time the trigger fired. For instance the scheduled time may
 
-             have been 10:00:00 but the actual fire time may have been 10:00:03 if
 
-             the scheduler was too busy.
 
-             </summary>
 
-             <returns> Returns the fireTimeUtc.</returns>
 
-             <seealso cref="P:Quartz.Impl.JobExecutionContextImpl.ScheduledFireTimeUtc"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.ScheduledFireTimeUtc">
 
-             <summary> 
 
-             The scheduled time the trigger fired for. For instance the scheduled
 
-             time may have been 10:00:00 but the actual fire time may have been
 
-             10:00:03 if the scheduler was too busy.
 
-             </summary>
 
-             <returns> Returns the scheduledFireTimeUtc.</returns>
 
-             <seealso cref="P:Quartz.Impl.JobExecutionContextImpl.FireTimeUtc"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.PreviousFireTimeUtc">
 
-             <summary>
 
-             Gets the previous fire time.
 
-             </summary>
 
-             <value>The previous fire time.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.NextFireTimeUtc">
 
-             <summary>
 
-             Gets the next fire time.
 
-             </summary>
 
-             <value>The next fire time.</value>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.Result">
 
-             <summary>
 
-             Returns the result (if any) that the <see cref="T:Quartz.IJob"/> set before its 
 
-             execution completed (the type of object set as the result is entirely up 
 
-             to the particular job).
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The result itself is meaningless to Quartz, but may be informative
 
-             to <see cref="T:Quartz.IJobListener"/>s or 
 
-             <see cref="T:Quartz.ITriggerListener"/>s that are watching the job's 
 
-             execution.
 
-             </para> 
 
-             
 
-             Set the result (if any) of the <see cref="T:Quartz.IJob"/>'s execution (the type of 
 
-             object set as the result is entirely up to the particular job).
 
-             
 
-             <para>
 
-             The result itself is meaningless to Quartz, but may be informative
 
-             to <see cref="T:Quartz.IJobListener"/>s or 
 
-             <see cref="T:Quartz.ITriggerListener"/>s that are watching the job's 
 
-             execution.
 
-             </para> 
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.JobRunTime">
 
-             <summary> 
 
-             The amount of time the job ran for.  The returned 
 
-             value will be <see cref="F:System.TimeSpan.MinValue"/> until the job has actually completed (or thrown an 
 
-             exception), and is therefore generally only useful to 
 
-             <see cref="T:Quartz.IJobListener"/>s and <see cref="T:Quartz.ITriggerListener"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.JobExecutionContextImpl.FireInstanceId">
 
-             <summary>
 
-             Returns the fire instance id.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.RemoteScheduler">
 
-             <summary>
 
-             An implementation of the <see cref="T:Quartz.IScheduler"/> interface that remotely
 
-             proxies all method calls to the equivalent call on a given <see cref="T:Quartz.Core.QuartzScheduler"/>
 
-             instance, via remoting or similar technology.
 
-             </summary>
 
-             <seealso cref="T:Quartz.IScheduler"/>
 
-             <seealso cref="T:Quartz.Core.QuartzScheduler"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.IScheduler">
 
-             <summary>
 
-             This is the main interface of a Quartz Scheduler.
 
-             </summary>
 
-             <remarks>
 
-             	<para>
 
-                     A <see cref="T:Quartz.IScheduler"/> maintains a registry of
 
-                     <see cref="T:Quartz.IJobDetail"/>s and <see cref="T:Quartz.ITrigger"/>s. Once
 
-                     registered, the <see cref="T:Quartz.IScheduler"/> is responsible for executing
 
-                     <see cref="T:Quartz.IJob"/> s when their associated <see cref="T:Quartz.ITrigger"/> s
 
-                     fire (when their scheduled time arrives).
 
-                 </para>
 
-             	<para>
 
-             		<see cref="T:Quartz.IScheduler"/> instances are produced by a
 
-                     <see cref="T:Quartz.ISchedulerFactory"/>. A scheduler that has already been
 
-                     created/initialized can be found and used through the same factory that
 
-                     produced it. After a <see cref="T:Quartz.IScheduler"/> has been created, it is in
 
-                     "stand-by" mode, and must have its <see cref="M:Quartz.IScheduler.Start"/> method
 
-                     called before it will fire any <see cref="T:Quartz.IJob"/>s.
 
-                 </para>
 
-             	<para>
 
-             		<see cref="T:Quartz.IJob"/> s are to be created by the 'client program', by
 
-                     defining a class that implements the <see cref="T:Quartz.IJob"/> interface.
 
-                     <see cref="T:Quartz.IJobDetail"/> objects are then created (also by the client) to
 
-                     define a individual instances of the <see cref="T:Quartz.IJob"/>.
 
-                     <see cref="T:Quartz.IJobDetail"/> instances can then be registered with the
 
-                     <see cref="T:Quartz.IScheduler"/> via the %IScheduler.ScheduleJob(JobDetail,
 
-                     Trigger)% or %IScheduler.AddJob(JobDetail, bool)% method.
 
-                 </para>
 
-             	<para>
 
-             		<see cref="T:Quartz.ITrigger"/> s can then be defined to fire individual
 
-                     <see cref="T:Quartz.IJob"/> instances based on given schedules.
 
-                     <see cref="T:Quartz.ISimpleTrigger"/> s are most useful for one-time firings, or
 
-                     firing at an exact moment in time, with N repeats with a given delay between
 
-                     them. <see cref="T:Quartz.ICronTrigger"/> s allow scheduling based on time of day,
 
-                     day of week, day of month, and month of year.
 
-                 </para>
 
-             	<para>
 
-             		<see cref="T:Quartz.IJob"/> s and <see cref="T:Quartz.ITrigger"/> s have a name and
 
-                     group associated with them, which should uniquely identify them within a single
 
-                     <see cref="T:Quartz.IScheduler"/>. The 'group' feature may be useful for creating
 
-                     logical groupings or categorizations of <see cref="T:Quartz.IJob"/>s and
 
-                     <see cref="T:Quartz.ITrigger"/>s. If you don't have need for assigning a group to a
 
-                     given <see cref="T:Quartz.IJob"/>s of <see cref="T:Quartz.ITrigger"/>s, then you can use
 
-                     the <see cref="F:Quartz.SchedulerConstants.DefaultGroup"/> constant defined on
 
-                     this interface.
 
-                 </para>
 
-             	<para>
 
-                     Stored <see cref="T:Quartz.IJob"/> s can also be 'manually' triggered through the
 
-                     use of the %IScheduler.TriggerJob(string, string)% function.
 
-                 </para>
 
-             	<para>
 
-                     Client programs may also be interested in the 'listener' interfaces that are
 
-                     available from Quartz. The <see cref="T:Quartz.IJobListener"/> interface provides
 
-                     notifications of <see cref="T:Quartz.IJob"/> executions. The
 
-                     <see cref="T:Quartz.ITriggerListener"/> interface provides notifications of
 
-                     <see cref="T:Quartz.ITrigger"/> firings. The <see cref="T:Quartz.ISchedulerListener"/>
 
-                     interface provides notifications of <see cref="T:Quartz.IScheduler"/> events and
 
-                     errors.  Listeners can be associated with local schedulers through the
 
-                     <see cref="T:Quartz.IListenerManager"/> interface.  
 
-                 </para>
 
-             	<para>
 
-                     The setup/configuration of a <see cref="T:Quartz.IScheduler"/> instance is very
 
-                     customizable. Please consult the documentation distributed with Quartz.
 
-                 </para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.IJobDetail"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <seealso cref="T:Quartz.IJobListener"/>
 
-             <seealso cref="T:Quartz.ITriggerListener"/>
 
-             <seealso cref="T:Quartz.ISchedulerListener"/>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.IsJobGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given JobGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.IsTriggerGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given TriggerGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetMetaData">
 
-             <summary>
 
-             Get a <see cref="T:Quartz.SchedulerMetaData"/> object describing the settings
 
-             and capabilities of the scheduler instance.
 
-             </summary>
 
-             <remarks>
 
-             Note that the data returned is an 'instantaneous' snap-shot, and that as
 
-             soon as it's returned, the meta data values may be different.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetCurrentlyExecutingJobs">
 
-             <summary>
 
-             Return a list of <see cref="T:Quartz.IJobExecutionContext"/> objects that
 
-             represent all currently executing Jobs in this Scheduler instance.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             This method is not cluster aware.  That is, it will only return Jobs
 
-             currently executing in this Scheduler instance, not across the entire
 
-             cluster.
 
-             </para>
 
-             <para>
 
-             Note that the list returned is an 'instantaneous' snap-shot, and that as
 
-             soon as it's returned, the true list of executing jobs may be different.
 
-             Also please read the doc associated with <see cref="T:Quartz.IJobExecutionContext"/>-
 
-             especially if you're using remoting.
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IJobExecutionContext"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetJobGroupNames">
 
-             <summary>
 
-             Get the names of all known <see cref="T:Quartz.IJobDetail"/> groups.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetTriggerGroupNames">
 
-             <summary>
 
-             Get the names of all known <see cref="T:Quartz.ITrigger"/> groups.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetPausedTriggerGroups">
 
-             <summary> 
 
-             Get the names of all <see cref="T:Quartz.ITrigger"/> groups that are paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.Start">
 
-             <summary>
 
-             Starts the <see cref="T:Quartz.IScheduler"/>'s threads that fire <see cref="T:Quartz.ITrigger"/>s.
 
-             When a scheduler is first created it is in "stand-by" mode, and will not
 
-             fire triggers.  The scheduler can also be put into stand-by mode by
 
-             calling the <see cref="M:Quartz.IScheduler.Standby"/> method.
 
-             </summary>
 
-             <remarks>
 
-             The misfire/recovery process will be started, if it is the initial call
 
-             to this method on this scheduler instance.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IScheduler.StartDelayed(System.TimeSpan)"/>
 
-             <seealso cref="M:Quartz.IScheduler.Standby"/>
 
-             <seealso cref="M:Quartz.IScheduler.Shutdown(System.Boolean)"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.StartDelayed(System.TimeSpan)">
 
-             <summary>
 
-             Calls <see cref="M:Quartz.IScheduler.Start"/> after the indicated delay.
 
-             (This call does not block). This can be useful within applications that
 
-             have initializers that create the scheduler immediately, before the
 
-             resources needed by the executing jobs have been fully initialized.
 
-             </summary>
 
-             <seealso cref="M:Quartz.IScheduler.Start"/>
 
-             <seealso cref="M:Quartz.IScheduler.Standby"/>
 
-             <seealso cref="M:Quartz.IScheduler.Shutdown(System.Boolean)"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.Standby">
 
-             <summary>
 
-             Temporarily halts the <see cref="T:Quartz.IScheduler"/>'s firing of <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             When <see cref="M:Quartz.IScheduler.Start"/> is called (to bring the scheduler out of 
 
-             stand-by mode), trigger misfire instructions will NOT be applied
 
-             during the execution of the <see cref="M:Quartz.IScheduler.Start"/> method - any misfires 
 
-             will be detected immediately afterward (by the <see cref="T:Quartz.Spi.IJobStore"/>'s 
 
-             normal process).
 
-             </para>
 
-             <para>
 
-             The scheduler is not destroyed, and can be re-started at any time.
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IScheduler.Start"/>
 
-             <seealso cref="M:Quartz.IScheduler.PauseAll"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.Shutdown">
 
-             <summary> 
 
-             Halts the <see cref="T:Quartz.IScheduler"/>'s firing of <see cref="T:Quartz.ITrigger"/>s,
 
-             and cleans up all resources associated with the Scheduler. Equivalent to Shutdown(false).
 
-             </summary>
 
-             <remarks>
 
-             The scheduler cannot be re-started.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IScheduler.Shutdown(System.Boolean)"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.Shutdown(System.Boolean)">
 
-             <summary>
 
-             Halts the <see cref="T:Quartz.IScheduler"/>'s firing of <see cref="T:Quartz.ITrigger"/>s,
 
-             and cleans up all resources associated with the Scheduler. 
 
-             </summary>
 
-             <remarks>
 
-             The scheduler cannot be re-started.
 
-             </remarks>
 
-             <param name="waitForJobsToComplete">
 
-             if <see langword="true"/> the scheduler will not allow this method
 
-             to return until all currently executing jobs have completed.
 
-             </param>
 
-             <seealso cref="M:Quartz.IScheduler.Shutdown"/> 
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.ScheduleJob(Quartz.IJobDetail,Quartz.ITrigger)">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.IJobDetail"/> to the
 
-             Scheduler, and associate the given <see cref="T:Quartz.ITrigger"/> with
 
-             it.
 
-             </summary>
 
-             <remarks>
 
-             If the given Trigger does not reference any <see cref="T:Quartz.IJob"/>, then it
 
-             will be set to reference the Job passed with it into this method.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.ScheduleJob(Quartz.ITrigger)">
 
-             <summary>
 
-             Schedule the given <see cref="T:Quartz.ITrigger"/> with the
 
-             <see cref="T:Quartz.IJob"/> identified by the <see cref="T:Quartz.ITrigger"/>'s settings.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.ScheduleJobs(System.Collections.Generic.IDictionary{Quartz.IJobDetail,Quartz.Collection.ISet{Quartz.ITrigger}},System.Boolean)">
 
-             <summary>
 
-             Schedule all of the given jobs with the related set of triggers.
 
-             </summary>
 
-             <remarks>
 
-             <para>If any of the given jobs or triggers already exist (or more
 
-             specifically, if the keys are not unique) and the replace
 
-             parameter is not set to true then an exception will be thrown.</para>
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.ScheduleJob(Quartz.IJobDetail,Quartz.Collection.ISet{Quartz.ITrigger},System.Boolean)">
 
-             <summary>
 
-             Schedule the given job with the related set of triggers.
 
-             </summary>
 
-             <remarks>
 
-             If any of the given job or triggers already exist (or more
 
-             specifically, if the keys are not unique) and the replace 
 
-             parameter is not set to true then an exception will be thrown.
 
-             </remarks>
 
-             <param name="jobDetail"></param>
 
-             <param name="triggersForJob"></param>
 
-             <param name="replace"></param>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.UnscheduleJob(Quartz.TriggerKey)">
 
-             <summary>
 
-             Remove the indicated <see cref="T:Quartz.ITrigger"/> from the scheduler.
 
-             <para>If the related job does not have any other triggers, and the job is
 
-             not durable, then the job will also be deleted.</para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.UnscheduleJobs(System.Collections.Generic.IList{Quartz.TriggerKey})">
 
-             <summary>
 
-             Remove all of the indicated <see cref="T:Quartz.ITrigger"/>s from the scheduler.
 
-             </summary>
 
-             <remarks>
 
-             <para>If the related job does not have any other triggers, and the job is
 
-             not durable, then the job will also be deleted.</para>
 
-             Note that while this bulk operation is likely more efficient than
 
-             invoking <see cref="M:Quartz.IScheduler.UnscheduleJob(Quartz.TriggerKey)"/> several
 
-             times, it may have the adverse affect of holding data locks for a
 
-             single long duration of time (rather than lots of small durations
 
-             of time).
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.RescheduleJob(Quartz.TriggerKey,Quartz.ITrigger)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.ITrigger"/> with the
 
-             given key, and store the new given one - which must be associated
 
-             with the same job (the new trigger must have the job name & group specified) 
 
-             - however, the new trigger need not have the same name as the old trigger.
 
-             </summary>
 
-             <param name="triggerKey">The <see cref="T:Quartz.ITrigger"/> to be replaced.</param>
 
-             <param name="newTrigger">
 
-             The new <see cref="T:Quartz.ITrigger"/> to be stored.
 
-             </param>
 
-             <returns> 
 
-             <see langword="null"/> if a <see cref="T:Quartz.ITrigger"/> with the given
 
-             name and group was not found and removed from the store (and the 
 
-             new trigger is therefore not stored),  otherwise
 
-             the first fire time of the newly scheduled trigger.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.AddJob(Quartz.IJobDetail,System.Boolean)">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.IJob"/> to the Scheduler - with no associated
 
-             <see cref="T:Quartz.ITrigger"/>. The <see cref="T:Quartz.IJob"/> will be 'dormant' until
 
-             it is scheduled with a <see cref="T:Quartz.ITrigger"/>, or <see cref="M:Quartz.IScheduler.TriggerJob(Quartz.JobKey)"/>
 
-             is called for it.
 
-             </summary>
 
-             <remarks>
 
-             The <see cref="T:Quartz.IJob"/> must by definition be 'durable', if it is not,
 
-             SchedulerException will be thrown.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.AddJob(Quartz.IJobDetail,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Add the given <see cref="T:Quartz.IJob"/> to the Scheduler - with no associated
 
-             <see cref="T:Quartz.ITrigger"/>. The <see cref="T:Quartz.IJob"/> will be 'dormant' until
 
-             it is scheduled with a <see cref="T:Quartz.ITrigger"/>, or <see cref="M:Quartz.IScheduler.TriggerJob(Quartz.JobKey)"/>
 
-             is called for it.
 
-             </summary>
 
-             <remarks>
 
-             With the <paramref name="storeNonDurableWhileAwaitingScheduling"/> parameter
 
-             set to <code>true</code>, a non-durable job can be stored.  Once it is
 
-             scheduled, it will resume normal non-durable behavior (i.e. be deleted
 
-             once there are no remaining associated triggers).
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.DeleteJob(Quartz.JobKey)">
 
-             <summary>
 
-             Delete the identified <see cref="T:Quartz.IJob"/> from the Scheduler - and any
 
-             associated <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-             <returns> true if the Job was found and deleted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.DeleteJobs(System.Collections.Generic.IList{Quartz.JobKey})">
 
-             <summary>
 
-             Delete the identified jobs from the Scheduler - and any
 
-             associated <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-             <remarks>
 
-             <para>Note that while this bulk operation is likely more efficient than
 
-             invoking <see cref="M:Quartz.IScheduler.DeleteJob(Quartz.JobKey)"/> several
 
-             times, it may have the adverse affect of holding data locks for a
 
-             single long duration of time (rather than lots of small durations
 
-             of time).</para>
 
-             </remarks>
 
-             <returns>
 
-             true if all of the Jobs were found and deleted, false if
 
-             one or more were not deleted.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.TriggerJob(Quartz.JobKey)">
 
-             <summary>
 
-             Trigger the identified <see cref="T:Quartz.IJobDetail"/>
 
-             (Execute it now).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.TriggerJob(Quartz.JobKey,Quartz.JobDataMap)">
 
-             <summary>
 
-             Trigger the identified <see cref="T:Quartz.IJobDetail"/> (Execute it now).
 
-             </summary>
 
-             <param name="data">
 
-             the (possibly <see langword="null"/>) JobDataMap to be
 
-             associated with the trigger that fires the job immediately.
 
-             </param>
 
-             <param name="jobKey">
 
-             The <see cref="T:Quartz.JobKey"/> of the <see cref="T:Quartz.IJob"/> to be executed.
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.PauseJob(Quartz.JobKey)">
 
-             <summary>
 
-             Pause the <see cref="T:Quartz.IJobDetail"/> with the given
 
-             key - by pausing all of its current <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.PauseJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.IJobDetail"/>s in the
 
-             matching groups - by pausing all of their <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The Scheduler will "remember" that the groups are paused, and impose the
 
-             pause on any new jobs that are added to any of those groups until it is resumed.
 
-             </para>
 
-             <para>NOTE: There is a limitation that only exactly matched groups
 
-             can be remembered as paused.  For example, if there are pre-existing
 
-             job in groups "aaa" and "bbb" and a matcher is given to pause
 
-             groups that start with "a" then the group "aaa" will be remembered
 
-             as paused and any subsequently added jobs in group "aaa" will be paused,
 
-             however if a job is added to group "axx" it will not be paused,
 
-             as "axx" wasn't known at the time the "group starts with a" matcher 
 
-             was applied.  HOWEVER, if there are pre-existing groups "aaa" and
 
-             "bbb" and a matcher is given to pause the group "axx" (with a
 
-             group equals matcher) then no jobs will be paused, but it will be 
 
-             remembered that group "axx" is paused and later when a job is added 
 
-             in that group, it will become paused.</para>
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IScheduler.ResumeJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.PauseTrigger(Quartz.TriggerKey)">
 
-             <summary> 
 
-             Pause the <see cref="T:Quartz.ITrigger"/> with the given key.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.ITrigger"/>s in the groups matching.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The Scheduler will "remember" all the groups paused, and impose the
 
-             pause on any new triggers that are added to any of those groups until it is resumed.
 
-             </para>
 
-             <para>NOTE: There is a limitation that only exactly matched groups
 
-             can be remembered as paused.  For example, if there are pre-existing
 
-             triggers in groups "aaa" and "bbb" and a matcher is given to pause
 
-             groups that start with "a" then the group "aaa" will be remembered as
 
-             paused and any subsequently added triggers in that group be paused,
 
-             however if a trigger is added to group "axx" it will not be paused,
 
-             as "axx" wasn't known at the time the "group starts with a" matcher 
 
-             was applied.  HOWEVER, if there are pre-existing groups "aaa" and
 
-             "bbb" and a matcher is given to pause the group "axx" (with a
 
-             group equals matcher) then no triggers will be paused, but it will be 
 
-             remembered that group "axx" is paused and later when a trigger is added
 
-             in that group, it will become paused.</para>
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IScheduler.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.ResumeJob(Quartz.JobKey)">
 
-             <summary>
 
-             Resume (un-pause) the <see cref="T:Quartz.IJobDetail"/> with
 
-             the given key.
 
-             </summary>
 
-             <remarks>
 
-             If any of the <see cref="T:Quartz.IJob"/>'s<see cref="T:Quartz.ITrigger"/> s missed one
 
-             or more fire-times, then the <see cref="T:Quartz.ITrigger"/>'s misfire
 
-             instruction will be applied.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.ResumeJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Resume (un-pause) all of the <see cref="T:Quartz.IJobDetail"/>s
 
-             in matching groups.
 
-             </summary>
 
-             <remarks>
 
-             If any of the <see cref="T:Quartz.IJob"/> s had <see cref="T:Quartz.ITrigger"/> s that
 
-             missed one or more fire-times, then the <see cref="T:Quartz.ITrigger"/>'s
 
-             misfire instruction will be applied.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IScheduler.PauseJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.ResumeTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Resume (un-pause) the <see cref="T:Quartz.ITrigger"/> with the given
 
-             key.
 
-             </summary>
 
-             <remarks>
 
-             If the <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Resume (un-pause) all of the <see cref="T:Quartz.ITrigger"/>s in matching groups.
 
-             </summary>
 
-             <remarks>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IScheduler.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.PauseAll">
 
-             <summary>
 
-             Pause all triggers - similar to calling <see cref="M:Quartz.IScheduler.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             on every group, however, after using this method <see cref="M:Quartz.IScheduler.ResumeAll"/> 
 
-             must be called to clear the scheduler's state of 'remembering' that all 
 
-             new triggers will be paused as they are added. 
 
-             </summary>
 
-             <remarks>
 
-             When <see cref="M:Quartz.IScheduler.ResumeAll"/> is called (to un-pause), trigger misfire
 
-             instructions WILL be applied.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IScheduler.ResumeAll"/>
 
-             <seealso cref="M:Quartz.IScheduler.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             <seealso cref="M:Quartz.IScheduler.Standby"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.ResumeAll">
 
-             <summary> 
 
-             Resume (un-pause) all triggers - similar to calling 
 
-             <see cref="M:Quartz.IScheduler.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/> on every group.
 
-             </summary>
 
-             <remarks>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IScheduler.PauseAll"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetJobKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Get the keys of all the <see cref="T:Quartz.IJobDetail"/>s in the matching groups.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetTriggersOfJob(Quartz.JobKey)">
 
-             <summary>
 
-             Get all <see cref="T:Quartz.ITrigger"/> s that are associated with the
 
-             identified <see cref="T:Quartz.IJobDetail"/>.
 
-             </summary>
 
-             <remarks>
 
-             The returned Trigger objects will be snap-shots of the actual stored
 
-             triggers.  If you wish to modify a trigger, you must re-store the
 
-             trigger afterward (e.g. see <see cref="M:Quartz.IScheduler.RescheduleJob(Quartz.TriggerKey,Quartz.ITrigger)"/>).
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetTriggerKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Get the names of all the <see cref="T:Quartz.ITrigger"/>s in the given
 
-             groups.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetJobDetail(Quartz.JobKey)">
 
-             <summary>
 
-             Get the <see cref="T:Quartz.IJobDetail"/> for the <see cref="T:Quartz.IJob"/>
 
-             instance with the given key .
 
-             </summary>
 
-             <remarks>
 
-             The returned JobDetail object will be a snap-shot of the actual stored
 
-             JobDetail.  If you wish to modify the JobDetail, you must re-store the
 
-             JobDetail afterward (e.g. see <see cref="M:Quartz.IScheduler.AddJob(Quartz.IJobDetail,System.Boolean)"/>).
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Get the <see cref="T:Quartz.ITrigger"/> instance with the given key.
 
-             </summary>
 
-             <remarks>
 
-             The returned Trigger object will be a snap-shot of the actual stored
 
-             trigger.  If you wish to modify the trigger, you must re-store the
 
-             trigger afterward (e.g. see <see cref="M:Quartz.IScheduler.RescheduleJob(Quartz.TriggerKey,Quartz.ITrigger)"/>).
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetTriggerState(Quartz.TriggerKey)">
 
-             <summary>
 
-             Get the current state of the identified <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <seealso cref="F:Quartz.TriggerState.Normal"/>
 
-             <seealso cref="F:Quartz.TriggerState.Paused"/>
 
-             <seealso cref="F:Quartz.TriggerState.Complete"/>
 
-             <seealso cref="F:Quartz.TriggerState.Blocked"/>
 
-             <seealso cref="F:Quartz.TriggerState.Error"/>
 
-             <seealso cref="F:Quartz.TriggerState.None"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.AddCalendar(System.String,Quartz.ICalendar,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Add (register) the given <see cref="T:Quartz.ICalendar"/> to the Scheduler.
 
-             </summary>
 
-             <param name="calName">Name of the calendar.</param>
 
-             <param name="calendar">The calendar.</param>
 
-             <param name="replace">if set to <c>true</c> [replace].</param>
 
-             <param name="updateTriggers">whether or not to update existing triggers that
 
-             referenced the already existing calendar so that they are 'correct'
 
-             based on the new trigger.</param>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.DeleteCalendar(System.String)">
 
-             <summary>
 
-             Delete the identified <see cref="T:Quartz.ICalendar"/> from the Scheduler.
 
-             </summary>
 
-             <remarks>
 
-             If removal of the <code>Calendar</code> would result in
 
-             <see cref="T:Quartz.ITrigger"/>s pointing to non-existent calendars, then a
 
-             <see cref="T:Quartz.SchedulerException"/> will be thrown.
 
-             </remarks>
 
-             <param name="calName">Name of the calendar.</param>
 
-             <returns>true if the Calendar was found and deleted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetCalendar(System.String)">
 
-             <summary>
 
-             Get the <see cref="T:Quartz.ICalendar"/> instance with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.GetCalendarNames">
 
-             <summary>
 
-             Get the names of all registered <see cref="T:Quartz.ICalendar"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.Interrupt(Quartz.JobKey)">
 
-             <summary>
 
-             Request the interruption, within this Scheduler instance, of all 
 
-             currently executing instances of the identified <see cref="T:Quartz.IJob"/>, which 
 
-             must be an implementor of the <see cref="T:Quartz.IInterruptableJob"/> interface.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             If more than one instance of the identified job is currently executing,
 
-             the <see cref="M:Quartz.IInterruptableJob.Interrupt"/> method will be called on
 
-             each instance.  However, there is a limitation that in the case that  
 
-             <see cref="M:Quartz.IScheduler.Interrupt(Quartz.JobKey)"/> on one instances throws an exception, all 
 
-             remaining  instances (that have not yet been interrupted) will not have 
 
-             their <see cref="M:Quartz.IScheduler.Interrupt(Quartz.JobKey)"/> method called.
 
-             </para>
 
-             
 
-             <para>
 
-             If you wish to interrupt a specific instance of a job (when more than
 
-             one is executing) you can do so by calling 
 
-             <see cref="M:Quartz.IScheduler.GetCurrentlyExecutingJobs"/> to obtain a handle 
 
-             to the job instance, and then invoke <see cref="M:Quartz.IScheduler.Interrupt(Quartz.JobKey)"/> on it
 
-             yourself.
 
-             </para>
 
-             <para>
 
-             This method is not cluster aware.  That is, it will only interrupt 
 
-             instances of the identified InterruptableJob currently executing in this 
 
-             Scheduler instance, not across the entire cluster.
 
-             </para>
 
-             </remarks>
 
-             <returns> 
 
-             true is at least one instance of the identified job was found and interrupted.
 
-             </returns>
 
-             <seealso cref="T:Quartz.IInterruptableJob"/>
 
-             <seealso cref="M:Quartz.IScheduler.GetCurrentlyExecutingJobs"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.Interrupt(System.String)">
 
-             <summary>
 
-             Request the interruption, within this Scheduler instance, of the 
 
-             identified executing job instance, which 
 
-             must be an implementor of the <see cref="T:Quartz.IInterruptableJob"/> interface.
 
-             </summary>
 
-             <remarks>
 
-             This method is not cluster aware.  That is, it will only interrupt 
 
-             instances of the identified InterruptableJob currently executing in this 
 
-             Scheduler instance, not across the entire cluster.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IInterruptableJob.Interrupt"/>
 
-             <seealso cref="M:Quartz.IScheduler.GetCurrentlyExecutingJobs"/>
 
-             <seealso cref="P:Quartz.IJobExecutionContext.FireInstanceId"/>
 
-             <seealso cref="M:Quartz.IScheduler.Interrupt(Quartz.JobKey)"/>
 
-             <param name="fireInstanceId">
 
-             the unique identifier of the job instance to  be interrupted (see <see cref="P:Quartz.IJobExecutionContext.FireInstanceId"/>
 
-             </param>
 
-             <returns>true if the identified job instance was found and interrupted.</returns>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.CheckExists(Quartz.JobKey)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.IJob"/> with the given identifier already 
 
-             exists within the scheduler.
 
-             </summary>
 
-             <param name="jobKey">the identifier to check for</param>
 
-             <returns>true if a Job exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.CheckExists(Quartz.TriggerKey)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.ITrigger"/> with the given identifier already 
 
-             exists within the scheduler.
 
-             </summary>
 
-             <param name="triggerKey">the identifier to check for</param>
 
-             <returns>true if a Trigger exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.IScheduler.Clear">
 
-             <summary>
 
-             Clears (deletes!) all scheduling data - all <see cref="T:Quartz.IJob"/>s, <see cref="T:Quartz.ITrigger"/>s
 
-             <see cref="T:Quartz.ICalendar"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IScheduler.SchedulerName">
 
-             <summary> 
 
-             Returns the name of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IScheduler.SchedulerInstanceId">
 
-             <summary>
 
-             Returns the instance Id of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IScheduler.Context">
 
-             <summary>
 
-             Returns the <see cref="T:Quartz.SchedulerContext"/> of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IScheduler.InStandbyMode">
 
-             <summary>
 
-             Reports whether the <see cref="T:Quartz.IScheduler"/> is in stand-by mode.
 
-             </summary>
 
-             <seealso cref="M:Quartz.IScheduler.Standby"/>
 
-             <seealso cref="M:Quartz.IScheduler.Start"/>
 
-         </member>
 
-         <member name="P:Quartz.IScheduler.IsShutdown">
 
-             <summary>
 
-             Reports whether the <see cref="T:Quartz.IScheduler"/> has been Shutdown.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.IScheduler.JobFactory">
 
-             <summary>
 
-             Set the <see cref="P:Quartz.IScheduler.JobFactory"/> that will be responsible for producing 
 
-             instances of <see cref="T:Quartz.IJob"/> classes.
 
-             </summary>
 
-             <remarks>
 
-             JobFactories may be of use to those wishing to have their application
 
-             produce <see cref="T:Quartz.IJob"/> instances via some special mechanism, such as to
 
-             give the opportunity for dependency injection.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.Spi.IJobFactory"/>
 
-         </member>
 
-         <member name="P:Quartz.IScheduler.ListenerManager">
 
-             <summary>
 
-             Get a reference to the scheduler's <see cref="T:Quartz.IListenerManager"/>,
 
-             through which listeners may be registered.
 
-             </summary>
 
-             <returns>the scheduler's <see cref="T:Quartz.IListenerManager"/></returns>
 
-             <seealso cref="P:Quartz.IScheduler.ListenerManager"/>
 
-             <seealso cref="T:Quartz.IJobListener"/>
 
-             <seealso cref="T:Quartz.ITriggerListener"/>
 
-             <seealso cref="T:Quartz.ISchedulerListener"/>
 
-         </member>
 
-         <member name="P:Quartz.IScheduler.IsStarted">
 
-             <summary>
 
-             Whether the scheduler has been started.  
 
-             </summary>
 
-             <remarks>
 
-             Note: This only reflects whether <see cref="M:Quartz.IScheduler.Start"/> has ever
 
-             been called on this Scheduler, so it will return <see langword="true"/> even 
 
-             if the <see cref="T:Quartz.IScheduler"/> is currently in standby mode or has been 
 
-             since shutdown.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.IScheduler.Start"/>
 
-             <seealso cref="P:Quartz.IScheduler.IsShutdown"/>
 
-             <seealso cref="P:Quartz.IScheduler.InStandbyMode"/>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.#ctor(System.String,Quartz.Spi.IRemotableSchedulerProxyFactory)">
 
-             <summary>
 
-             Construct a <see cref="T:Quartz.Impl.RemoteScheduler"/> instance to proxy the given
 
-             RemoteableQuartzScheduler instance.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.IsJobGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given JobGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.IsTriggerGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given TriggerGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetMetaData">
 
-             <summary>
 
-             Get a <see cref="T:Quartz.SchedulerMetaData"/> object describing the settings
 
-             and capabilities of the scheduler instance.
 
-             <para>
 
-             Note that the data returned is an 'instantaneous' snap-shot, and that as
 
-             soon as it's returned, the meta data values may be different.
 
-             </para>
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetCurrentlyExecutingJobs">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetJobGroupNames">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetTriggerGroupNames">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetPausedTriggerGroups">
 
-             <summary>
 
-             Get the names of all <see cref="T:Quartz.ITrigger"/> groups that are paused.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.Start">
 
-             <summary> 
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.StartDelayed(System.TimeSpan)">
 
-             <summary> 
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.Standby">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.Shutdown">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.Shutdown(System.Boolean)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.ScheduleJob(Quartz.IJobDetail,Quartz.ITrigger)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.ScheduleJob(Quartz.ITrigger)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.AddJob(Quartz.IJobDetail,System.Boolean)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.AddJob(Quartz.IJobDetail,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.DeleteJob(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.UnscheduleJob(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.RescheduleJob(Quartz.TriggerKey,Quartz.ITrigger)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.TriggerJob(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.TriggerJob(Quartz.JobKey,Quartz.JobDataMap)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.PauseTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.PauseJob(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.PauseJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.ResumeTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.ResumeJob(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.ResumeJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.PauseAll">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.ResumeAll">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetJobKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetTriggersOfJob(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetTriggerKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetJobDetail(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.CheckExists(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.CheckExists(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.Clear">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetTriggerState(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.AddCalendar(System.String,Quartz.ICalendar,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.DeleteCalendar(System.String)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetCalendar(System.String)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.GetCalendarNames">
 
-             <summary>
 
-             Get the names of all registered <see cref="T:Quartz.ICalendar"/>.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.RemoteScheduler.Interrupt(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.RemoteScheduler.SchedulerName">
 
-             <summary>
 
-             Returns the name of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.RemoteScheduler.SchedulerInstanceId">
 
-             <summary>
 
-             Returns the instance Id of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.RemoteScheduler.Context">
 
-             <summary> 
 
-             Returns the <see cref="T:Quartz.SchedulerContext"/> of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.RemoteScheduler.InStandbyMode">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.RemoteScheduler.IsShutdown">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.RemoteScheduler.JobFactory">
 
-             <summary>
 
-             Set the <see cref="P:Quartz.Impl.RemoteScheduler.JobFactory"/> that will be responsible for producing
 
-             instances of <see cref="T:Quartz.IJob"/> classes.
 
-             <para>
 
-             JobFactories may be of use to those wishing to have their application
 
-             produce <see cref="T:Quartz.IJob"/> instances via some special mechanism, such as to
 
-             give the opportunity for dependency injection.
 
-             </para>
 
-             </summary>
 
-             <value></value>
 
-             <seealso cref="T:Quartz.Spi.IJobFactory"/>
 
-             <throws>  SchedulerException </throws>
 
-         </member>
 
-         <member name="P:Quartz.Impl.RemoteScheduler.IsStarted">
 
-             <summary>
 
-             Whether the scheduler has been started.
 
-             </summary>
 
-             <value></value>
 
-             <remarks>
 
-             Note: This only reflects whether <see cref="M:Quartz.Impl.RemoteScheduler.Start"/> has ever
 
-             been called on this Scheduler, so it will return <see langword="true"/> even
 
-             if the <see cref="T:Quartz.IScheduler"/> is currently in standby mode or has been
 
-             since shutdown.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.Impl.RemoteScheduler.Start"/>
 
-             <seealso cref="P:Quartz.Impl.RemoteScheduler.IsShutdown"/>
 
-             <seealso cref="P:Quartz.Impl.RemoteScheduler.InStandbyMode"/>
 
-         </member>
 
-         <member name="T:Quartz.Impl.SchedulerDetailsSetter">
 
-             <summary>
 
-             This utility calls methods reflectively on the given objects even though the
 
-             methods are likely on a proper interface (ThreadPool, JobStore, etc). The
 
-             motivation is to be tolerant of older implementations that have not been
 
-             updated for the changes in the interfaces (eg. LocalTaskExecutorThreadPool in
 
-             spring quartz helpers)
 
-             </summary>
 
-             <author>teck</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Impl.SchedulerRepository">
 
-             <summary>
 
-             Holds references to Scheduler instances - ensuring uniqueness, and
 
-             preventing garbage collection, and allowing 'global' lookups.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.SchedulerRepository.Bind(Quartz.IScheduler)">
 
-             <summary>
 
-             Binds the specified sched.
 
-             </summary>
 
-             <param name="sched">The sched.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.SchedulerRepository.Remove(System.String)">
 
-             <summary>
 
-             Removes the specified sched name.
 
-             </summary>
 
-             <param name="schedName">Name of the sched.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.SchedulerRepository.Lookup(System.String)">
 
-             <summary>
 
-             Lookups the specified sched name.
 
-             </summary>
 
-             <param name="schedName">Name of the sched.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.SchedulerRepository.LookupAll">
 
-             <summary>
 
-             Lookups all.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Impl.SchedulerRepository.Instance">
 
-             <summary>
 
-             Gets the singleton instance.
 
-             </summary>
 
-             <value>The instance.</value>
 
-         </member>
 
-         <member name="T:Quartz.Impl.StdJobRunShellFactory">
 
-             <summary> 
 
-             Responsible for creating the instances of <see cref="T:Quartz.Core.JobRunShell"/>
 
-             to be used within the <see cref="T:Quartz.Core.QuartzScheduler"/> instance.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdJobRunShellFactory.Initialize(Quartz.IScheduler)">
 
-             <summary>
 
-             Initialize the factory, providing a handle to the <see cref="T:Quartz.IScheduler"/>
 
-             that should be made available within the <see cref="T:Quartz.Core.JobRunShell"/> and
 
-             the <see cref="T:Quartz.IJobExecutionContext"/> s within it.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdJobRunShellFactory.CreateJobRunShell(Quartz.Spi.TriggerFiredBundle)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.Core.QuartzSchedulerThread"/> to obtain instances of 
 
-             <see cref="T:Quartz.Core.JobRunShell"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Impl.StdScheduler">
 
-             <summary>
 
-             An implementation of the <see cref="T:Quartz.IScheduler"/> interface that directly
 
-             proxies all method calls to the equivalent call on a given <see cref="T:Quartz.Core.QuartzScheduler"/>
 
-             instance.
 
-             </summary>
 
-             <seealso cref="T:Quartz.IScheduler"/>
 
-             <seealso cref="T:Quartz.Core.QuartzScheduler"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.#ctor(Quartz.Core.QuartzScheduler)">
 
-             <summary>
 
-             Construct a <see cref="T:Quartz.Impl.StdScheduler"/> instance to proxy the given
 
-             <see cref="T:Quartz.Core.QuartzScheduler"/> instance.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.IsJobGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given JobGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.IsTriggerGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given TriggerGroup
 
-             is paused
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetMetaData">
 
-             <summary>
 
-             Get a <see cref="T:Quartz.SchedulerMetaData"/> object describing the settings
 
-             and capabilities of the scheduler instance.
 
-             <para>
 
-             Note that the data returned is an 'instantaneous' snap-shot, and that as
 
-             soon as it's returned, the meta data values may be different.
 
-             </para>
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetCurrentlyExecutingJobs">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.Clear">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetPausedTriggerGroups">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetJobGroupNames">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetTriggerGroupNames">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.Start">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.StartDelayed(System.TimeSpan)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.Standby">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.Shutdown">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.Shutdown(System.Boolean)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.ScheduleJob(Quartz.IJobDetail,Quartz.ITrigger)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.ScheduleJob(Quartz.ITrigger)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.AddJob(Quartz.IJobDetail,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.AddJob(Quartz.IJobDetail,System.Boolean)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.DeleteJob(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.UnscheduleJob(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.RescheduleJob(Quartz.TriggerKey,Quartz.ITrigger)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.TriggerJob(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.TriggerJob(Quartz.JobKey,Quartz.JobDataMap)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.CheckExists(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.CheckExists(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.PauseTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.PauseJob(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.PauseJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.ResumeTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.ResumeJob(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.ResumeJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.PauseAll">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.ResumeAll">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetTriggersOfJob(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetJobKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetTriggerKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetJobDetail(Quartz.JobKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetTriggerState(Quartz.TriggerKey)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.AddCalendar(System.String,Quartz.ICalendar,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.DeleteCalendar(System.String)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetCalendar(System.String)">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.GetCalendarNames">
 
-             <summary>
 
-             Get the names of all registered <see cref="T:Quartz.ICalendar"/>.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdScheduler.Interrupt(Quartz.JobKey)">
 
-             <summary>
 
-             Request the interruption, within this Scheduler instance, of all
 
-             currently executing instances of the identified <see cref="T:Quartz.IJob"/>, which
 
-             must be an implementor of the <see cref="T:Quartz.IInterruptableJob"/> interface.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             If more than one instance of the identified job is currently executing,
 
-             the <see cref="M:Quartz.IInterruptableJob.Interrupt"/> method will be called on
 
-             each instance.  However, there is a limitation that in the case that
 
-             <see cref="M:Quartz.Impl.StdScheduler.Interrupt(Quartz.JobKey)"/> on one instances throws an exception, all
 
-             remaining  instances (that have not yet been interrupted) will not have
 
-             their <see cref="M:Quartz.Impl.StdScheduler.Interrupt(Quartz.JobKey)"/> method called.
 
-             </para>
 
-             <para>
 
-             If you wish to interrupt a specific instance of a job (when more than
 
-             one is executing) you can do so by calling
 
-             <see cref="M:Quartz.Impl.StdScheduler.GetCurrentlyExecutingJobs"/> to obtain a handle
 
-             to the job instance, and then invoke <see cref="M:Quartz.Impl.StdScheduler.Interrupt(Quartz.JobKey)"/> on it
 
-             yourself.
 
-             </para>
 
-             <para>
 
-             This method is not cluster aware.  That is, it will only interrupt
 
-             instances of the identified InterruptableJob currently executing in this
 
-             Scheduler instance, not across the entire cluster.
 
-             </para>
 
-             </remarks>
 
-             <returns>true is at least one instance of the identified job was found and interrupted.</returns>
 
-             <throws>  UnableToInterruptJobException if the job does not implement </throws>
 
-             <seealso cref="T:Quartz.IInterruptableJob"/>
 
-             <seealso cref="M:Quartz.Impl.StdScheduler.GetCurrentlyExecutingJobs"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.StdScheduler.SchedulerName">
 
-             <summary>
 
-             Returns the name of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.StdScheduler.SchedulerInstanceId">
 
-             <summary>
 
-             Returns the instance Id of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.StdScheduler.Context">
 
-             <summary>
 
-             Returns the <see cref="T:Quartz.SchedulerContext"/> of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.StdScheduler.IsStarted">
 
-             <summary>
 
-             Whether the scheduler has been started.
 
-             </summary>
 
-             <value></value>
 
-             <remarks>
 
-             Note: This only reflects whether <see cref="M:Quartz.Impl.StdScheduler.Start"/> has ever
 
-             been called on this Scheduler, so it will return <see langword="true"/> even
 
-             if the <see cref="T:Quartz.IScheduler"/> is currently in standby mode or has been
 
-             since shutdown.
 
-             </remarks>
 
-             <seealso cref="M:Quartz.Impl.StdScheduler.Start"/>
 
-             <seealso cref="P:Quartz.Impl.StdScheduler.IsShutdown"/>
 
-             <seealso cref="P:Quartz.Impl.StdScheduler.InStandbyMode"/>
 
-         </member>
 
-         <member name="P:Quartz.Impl.StdScheduler.InStandbyMode">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.StdScheduler.IsShutdown">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.StdScheduler.ListenerManager">
 
-             <summary>
 
-             Calls the equivalent method on the 'proxied' <see cref="T:Quartz.Core.QuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.StdScheduler.JobFactory">
 
-             <seealso cref="P:Quartz.IScheduler.JobFactory">
 
-             </seealso>
 
-         </member>
 
-         <member name="T:Quartz.Impl.StdSchedulerFactory">
 
-             <summary>
 
-             An implementation of <see cref="T:Quartz.ISchedulerFactory"/> that
 
-             does all of it's work of creating a <see cref="T:Quartz.Core.QuartzScheduler"/> instance
 
-             based on the contents of a properties file.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             By default a properties are loaded from App.config's quartz section. 
 
-             If that fails, then the file is loaded "quartz.properties". If file does not exist,
 
-             default configuration located (as a embedded resource) in Quartz.dll is loaded. If you
 
-             wish to use a file other than these defaults, you must define the system
 
-             property 'quartz.properties' to point to the file you want.
 
-             </para>
 
-             <para>
 
-             See the sample properties that are distributed with Quartz for
 
-             information about the various settings available within the file.
 
-             </para>
 
-             <para>
 
-             Alternatively, you can explicitly Initialize the factory by calling one of
 
-             the <see cref="M:Quartz.Impl.StdSchedulerFactory.Initialize"/> methods before calling <see cref="M:Quartz.Impl.StdSchedulerFactory.GetScheduler"/>.
 
-             </para>
 
-             <para>
 
-             Instances of the specified <see cref="T:Quartz.Spi.IJobStore"/>,
 
-             <see cref="T:Quartz.Spi.IThreadPool"/>, classes will be created
 
-             by name, and then any additional properties specified for them in the config
 
-             file will be set on the instance by calling an equivalent 'set' method. For
 
-             example if the properties file contains the property 'quartz.jobStore.
 
-             myProp = 10' then after the JobStore class has been instantiated, the property
 
-             'MyProp' will be set with the value. Type conversion to primitive CLR types
 
-             (int, long, float, double, boolean, enum and string) are performed before calling
 
-             the property's setter method.
 
-             </para>
 
-             </remarks>
 
-             <author>James House</author>
 
-             <author>Anthony Eden</author>
 
-             <author>Mohammad Rezaei</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdSchedulerFactory.GetDefaultScheduler">
 
-             <summary>
 
-             Returns a handle to the default Scheduler, creating it if it does not
 
-             yet exist.
 
-             </summary>
 
-             <seealso cref="M:Quartz.Impl.StdSchedulerFactory.Initialize">
 
-             </seealso>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdSchedulerFactory.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.StdSchedulerFactory"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdSchedulerFactory.#ctor(System.Collections.Specialized.NameValueCollection)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Impl.StdSchedulerFactory"/> class.
 
-             </summary>
 
-             <param name="props">The props.</param>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdSchedulerFactory.Initialize">
 
-             <summary>
 
-             Initialize the <see cref="T:Quartz.ISchedulerFactory"/>.
 
-             </summary>
 
-             <remarks>
 
-             By default a properties file named "quartz.properties" is loaded from
 
-             the 'current working directory'. If that fails, then the
 
-             "quartz.properties" file located (as an embedded resource) in the Quartz.NET
 
-             assembly is loaded. If you wish to use a file other than these defaults,
 
-             you must define the system property 'quartz.properties' to point to
 
-             the file you want.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdSchedulerFactory.OverrideWithSysProps(System.Collections.Specialized.NameValueCollection)">
 
-             <summary>
 
-             Creates a new name value collection and overrides its values
 
-             with system values (environment variables).
 
-             </summary>
 
-             <param name="props">The base properties to override.</param>
 
-             <returns>A new NameValueCollection instance.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdSchedulerFactory.Initialize(System.Collections.Specialized.NameValueCollection)">
 
-             <summary> 
 
-             Initialize the <see cref="T:Quartz.ISchedulerFactory"/> with
 
-             the contents of the given key value collection object.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdSchedulerFactory.Instantiate">
 
-             <summary>  </summary>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdSchedulerFactory.LoadType(System.String)">
 
-             <summary>
 
-             Needed while loadhelper is not constructed.
 
-             </summary>
 
-             <param name="typeName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdSchedulerFactory.GetScheduler">
 
-             <summary>
 
-             Returns a handle to the Scheduler produced by this factory.
 
-             </summary>
 
-             <remarks>
 
-             If one of the <see cref="M:Quartz.Impl.StdSchedulerFactory.Initialize"/> methods has not be previously
 
-             called, then the default (no-arg) <see cref="M:Quartz.Impl.StdSchedulerFactory.Initialize"/> method
 
-             will be called by this method.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Impl.StdSchedulerFactory.GetScheduler(System.String)">
 
-             <summary> <para>
 
-             Returns a handle to the Scheduler with the given name, if it exists (if
 
-             it has already been instantiated).
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Impl.StdSchedulerFactory.AllSchedulers">
 
-             <summary> <para>
 
-             Returns a handle to all known Schedulers (made by any
 
-             StdSchedulerFactory instance.).
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Job.DirectoryScanJob">
 
-             <summary>
 
-              Inspects a directory and compares whether any files' "last modified dates" 
 
-              have changed since the last time it was inspected.  If one or more files 
 
-              have been updated (or created), the job invokes a "call-back" method on an 
 
-              identified <see cref="T:Quartz.Job.IDirectoryScanListener"/> that can be found in the
 
-              <see cref="T:Quartz.SchedulerContext"/>.
 
-              </summary>
 
-              <author>pl47ypus</author>
 
-              <author>James House</author>
 
-              <author>Marko Lahma (.NET)</author>
 
-              
 
-         </member>
 
-         <member name="T:Quartz.IJob">
 
-             <summary> 
 
-             The interface to be implemented by classes which represent a 'job' to be
 
-             performed.
 
-             </summary>
 
-             <remarks>
 
-             Instances of this interface must have a <see langword="public"/>
 
-             no-argument constructor. <see cref="T:Quartz.JobDataMap"/> provides a mechanism for 'instance member data'
 
-             that may be required by some implementations of this interface.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IJobDetail"/>
 
-             <seealso cref="T:Quartz.JobBuilder"/>
 
-             <seealso cref="T:Quartz.DisallowConcurrentExecutionAttribute"/>
 
-             <seealso cref="T:Quartz.PersistJobDataAfterExecutionAttribute"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <seealso cref="T:Quartz.IScheduler"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             fires that is associated with the <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-             <remarks>
 
-             The implementation may wish to set a  result object on the 
 
-             JobExecutionContext before this method exits.  The result itself
 
-             is meaningless to Quartz, but may be informative to 
 
-             <see cref="T:Quartz.IJobListener"/>s or 
 
-             <see cref="T:Quartz.ITriggerListener"/>s that are watching the job's 
 
-             execution.
 
-             </remarks>
 
-             <param name="context">The execution context.</param>
 
-         </member>
 
-         <member name="F:Quartz.Job.DirectoryScanJob.DirectoryName">
 
-             <see cref="T:Quartz.JobDataMap"/> key with which to specify the directory to be 
 
-              monitored - an absolute path is recommended. 
 
-         </member>
 
-         <member name="F:Quartz.Job.DirectoryScanJob.DirectoryScanListenerName">
 
-             <see cref="T:Quartz.JobDataMap"/> key with which to specify the 
 
-             <see cref="T:Quartz.Job.IDirectoryScanListener"/> to be 
 
-             notified when the directory contents change.  
 
-         </member>
 
-         <member name="F:Quartz.Job.DirectoryScanJob.MinimumUpdateAge">
 
-             <see cref="T:Quartz.JobDataMap"/> key with which to specify a <see cref="T:System.Int64"/>
 
-             value that represents the minimum number of milliseconds that must have
 
-             passed since the file's last modified time in order to consider the file
 
-             new/altered.  This is necessary because another process may still be
 
-             in the middle of writing to the file when the scan occurs, and the
 
-              file may therefore not yet be ready for processing.
 
-             <para>If this parameter is not specified, a default value of 5000 (five seconds) will be used.</para>
 
-         </member>
 
-         <member name="M:Quartz.Job.DirectoryScanJob.Execute(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             This is the main entry point for job execution. The scheduler will call this method on the 
 
-             job once it is triggered.
 
-             </summary>
 
-             <param name="context">The <see cref="T:Quartz.IJobExecutionContext"/> that 
 
-             the job will use during execution.</param>
 
-         </member>
 
-         <member name="T:Quartz.Job.FileScanJob">
 
-             <summary> 
 
-             Inspects a file and compares whether it's "last modified date" has changed
 
-             since the last time it was inspected.  If the file has been updated, the
 
-             job invokes a "call-back" method on an identified 
 
-             <see cref="T:Quartz.Job.IFileScanListener"/> that can be found in the 
 
-             <see cref="T:Quartz.SchedulerContext"/>.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-             <seealso cref="T:Quartz.Job.IFileScanListener"/>
 
-         </member>
 
-         <member name="F:Quartz.Job.FileScanJob.FileName">
 
-             <summary>
 
-             JobDataMap key with which to specify the name of the file to monitor.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.FileScanJob.FileScanListenerName">
 
-             <summary>
 
-             JobDataMap key with which to specify the <see cref="T:Quartz.Job.IFileScanListener"/>
 
-             to be notified when the file contents change. 
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.FileScanJob.MinimumUpdateAge">
 
-             <summary>
 
-             <see cref="T:Quartz.JobDataMap"/> key with which to specify a long
 
-             value that represents the minimum number of milliseconds that must have
 
-             past since the file's last modified time in order to consider the file
 
-             new/altered.  This is necessary because another process may still be
 
-             in the middle of writing to the file when the scan occurs, and the
 
-             file may therefore not yet be ready for processing.
 
-             
 
-             <para>If this parameter is not specified, a default value of 
 
-             5000 (five seconds) will be used.</para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Job.FileScanJob.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Job.FileScanJob"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Job.FileScanJob.Execute(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             fires that is associated with the <see cref="T:Quartz.IJob"/>.
 
-             <para>
 
-             The implementation may wish to set a  result object on the
 
-             JobExecutionContext before this method exits.  The result itself
 
-             is meaningless to Quartz, but may be informative to
 
-             <see cref="T:Quartz.IJobListener"/>s or
 
-             <see cref="T:Quartz.ITriggerListener"/>s that are watching the job's
 
-             execution.
 
-             </para>
 
-             </summary>
 
-             <param name="context">The execution context.</param>
 
-             <seealso cref="T:Quartz.IJob">
 
-             </seealso>
 
-         </member>
 
-         <member name="M:Quartz.Job.FileScanJob.GetLastModifiedDate(System.String)">
 
-             <summary>
 
-             Gets the last modified date.
 
-             </summary>
 
-             <param name="fileName">Name of the file.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Job.FileScanJob.Log">
 
-             <summary>
 
-             Gets the log.
 
-             </summary>
 
-             <value>The log.</value>
 
-         </member>
 
-         <member name="T:Quartz.Job.IDirectoryScanListener">
 
-             <summary>Interface for objects wishing to receive a 'call-back' from a <see cref="T:Quartz.Job.DirectoryScanJob"/></summary>
 
-             <remarks><para>Instances should be stored in the <see cref="T:Quartz.SchedulerContext"/> such that the
 
-             <see cref="T:Quartz.Job.DirectoryScanJob"/> can find it.</para></remarks>
 
-             <author>James House</author>
 
-              <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Job.IDirectoryScanListener.FilesUpdatedOrAdded(System.Collections.Generic.IEnumerable{System.IO.FileInfo})">
 
-             <param name="updatedFiles">An array of <see cref="T:System.IO.FileInfo"/> objects that were updated/added 
 
-             since the last scan of the directory</param>
 
-         </member>
 
-         <member name="T:Quartz.Job.IFileScanListener">
 
-             <summary> 
 
-             Interface for objects wishing to receive a 'call-back' from a 
 
-             <see cref="T:Quartz.Job.FileScanJob"/>.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-             <seealso cref="T:Quartz.Job.FileScanJob"/>
 
-         </member>
 
-         <member name="M:Quartz.Job.IFileScanListener.FileUpdated(System.String)">
 
-             <summary>
 
-             Informs that certain file has been updated.
 
-             </summary>
 
-             <param name="fileName">Name of the file.</param>
 
-         </member>
 
-         <member name="T:Quartz.Job.NativeJob">
 
-             <summary>
 
-             Built in job for executing native executables in a separate process.
 
-             </summary>
 
-             <remarks>
 
-             <example>
 
-                 JobDetail job = new JobDetail("dumbJob", null, typeof(Quartz.Jobs.NativeJob));
 
-                 job.JobDataMap.Put(Quartz.Jobs.NativeJob.PropertyCommand, "echo \"hi\" >> foobar.txt");
 
-                 Trigger trigger = TriggerUtils.MakeSecondlyTrigger(5);
 
-                 trigger.Name = "dumbTrigger";
 
-                 sched.ScheduleJob(job, trigger);
 
-             </example>
 
-             If PropertyWaitForProcess is true, then the integer exit value of the process
 
-             will be saved as the job execution result in the JobExecutionContext.
 
-             </remarks>
 
-             <author>Matthew Payne</author>
 
-             <author>James House</author>
 
-             <author>Steinar Overbeck Cook</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.Job.NativeJob.PropertyCommand">
 
-             <summary> 
 
-             Required parameter that specifies the name of the command (executable) 
 
-             to be ran.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.NativeJob.PropertyParameters">
 
-             <summary> 
 
-             Optional parameter that specifies the parameters to be passed to the
 
-             executed command.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.NativeJob.PropertyWaitForProcess">
 
-             <summary> 
 
-             Optional parameter (value should be 'true' or 'false') that specifies 
 
-             whether the job should wait for the execution of the native process to 
 
-             complete before it completes.
 
-             
 
-             <para>Defaults to <see langword="true" />.</para>  
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.NativeJob.PropertyConsumeStreams">
 
-             <summary> 
 
-             Optional parameter (value should be 'true' or 'false') that specifies 
 
-             whether the spawned process's stdout and stderr streams should be 
 
-             consumed.  If the process creates output, it is possible that it might
 
-             'hang' if the streams are not consumed.
 
-             
 
-             <para>Defaults to <see langword="false" />.</para>  
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.NativeJob.PropertyWorkingDirectory">
 
-             <summary> 
 
-             Optional parameter that specifies the working directory to be used by 
 
-             the executed command.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Job.NativeJob.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Job.NativeJob"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Job.NativeJob.Execute(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             fires that is associated with the <see cref="T:Quartz.IJob"/>.
 
-             <para>
 
-             The implementation may wish to set a  result object on the
 
-             JobExecutionContext before this method exits.  The result itself
 
-             is meaningless to Quartz, but may be informative to
 
-             <see cref="T:Quartz.IJobListener"/>s or
 
-             <see cref="T:Quartz.ITriggerListener"/>s that are watching the job's
 
-             execution.
 
-             </para>
 
-             </summary>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="P:Quartz.Job.NativeJob.Log">
 
-             <summary>
 
-             Gets the log.
 
-             </summary>
 
-             <value>The log.</value>
 
-         </member>
 
-         <member name="T:Quartz.Job.NativeJob.StreamConsumer">
 
-             <summary> 
 
-             Consumes data from the given input stream until EOF and prints the data to stdout
 
-             </summary>
 
-             <author>cooste</author>
 
-             <author>James House</author>
 
-         </member>
 
-         <member name="M:Quartz.Job.NativeJob.StreamConsumer.#ctor(Quartz.Job.NativeJob,System.IO.Stream,System.String)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Job.NativeJob.StreamConsumer"/> class.
 
-             </summary>
 
-             <param name="enclosingInstance">The enclosing instance.</param>
 
-             <param name="inputStream">The input stream.</param>
 
-             <param name="type">The type.</param>
 
-         </member>
 
-         <member name="M:Quartz.Job.NativeJob.StreamConsumer.Run">
 
-             <summary> 
 
-             Runs this object as a separate thread, printing the contents of the input stream
 
-             supplied during instantiation, to either Console. or stderr
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Job.NoOpJob">
 
-             <summary>
 
-             An implementation of Job, that does absolutely nothing - useful for system
 
-             which only wish to use <see cref="T:Quartz.ITriggerListener"/>s
 
-             and <see cref="T:Quartz.IJobListener"/>s, rather than writing
 
-             Jobs that perform work.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Job.NoOpJob.Execute(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Do nothing.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Job.SendMailJob">
 
-             <summary>
 
-             A Job which sends an e-mail with the configured content to the configured
 
-             recipient.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertySmtpHost">
 
-             <summary> The host name of the smtp server. REQUIRED.</summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertySmtpPort">
 
-             <summary> The port of the smtp server. Optional.</summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertyUsername">
 
-             <summary> Username for authenticated session. Password must also be set if username is used. Optional.</summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertyPassword">
 
-             <summary> Password for authenticated session. Optional.</summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertyRecipient">
 
-             <summary> The e-mail address to send the mail to. REQUIRED.</summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertyCcRecipient">
 
-             <summary> The e-mail address to cc the mail to. Optional.</summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertySender">
 
-             <summary> The e-mail address to claim the mail is from. REQUIRED.</summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertyReplyTo">
 
-             <summary> The e-mail address the message should say to reply to. Optional.</summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertySubject">
 
-             <summary> The subject to place on the e-mail. REQUIRED.</summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertyMessage">
 
-             <summary> The e-mail message body. REQUIRED.</summary>
 
-         </member>
 
-         <member name="F:Quartz.Job.SendMailJob.PropertyEncoding">
 
-             <summary> The message subject and body content type. Optional.</summary>
 
-         </member>
 
-         <member name="M:Quartz.Job.SendMailJob.Execute(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Executes the job.
 
-             </summary>
 
-             <param name="context">The job execution context.</param>
 
-         </member>
 
-         <member name="T:Quartz.Listener.BroadcastJobListener">
 
-             <summary>
 
-             Holds a List of references to JobListener instances and broadcasts all
 
-             events to them (in order).
 
-             </summary>
 
-             <remarks>
 
-             <para>The broadcasting behavior of this listener to delegate listeners may be
 
-             more convenient than registering all of the listeners directly with the
 
-             Scheduler, and provides the flexibility of easily changing which listeners
 
-             get notified.</para>
 
-             </remarks>
 
-             <seealso cref="M:Quartz.Listener.BroadcastJobListener.AddListener(Quartz.IJobListener)"/>
 
-             <seealso cref="M:Quartz.Listener.BroadcastJobListener.RemoveListener(Quartz.IJobListener)"/>
 
-             <seealso cref="M:Quartz.Listener.BroadcastJobListener.RemoveListener(System.String)"/>
 
-             <author>James House (jhouse AT revolition DOT net)</author>
 
-         </member>
 
-         <member name="M:Quartz.Listener.BroadcastJobListener.#ctor(System.String)">
 
-             <summary>
 
-             Construct an instance with the given name.
 
-             </summary>
 
-             <remarks>
 
-             (Remember to add some delegate listeners!)
 
-             </remarks>
 
-             <param name="name">the name of this instance</param>
 
-         </member>
 
-         <member name="M:Quartz.Listener.BroadcastJobListener.#ctor(System.String,System.Collections.Generic.List{Quartz.IJobListener})">
 
-             <summary>
 
-             Construct an instance with the given name, and List of listeners.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="name">the name of this instance</param>
 
-             <param name="listeners">the initial List of JobListeners to broadcast to.</param>
 
-         </member>
 
-         <member name="T:Quartz.Listener.BroadcastSchedulerListener">
 
-              <summary>
 
-              Holds a List of references to SchedulerListener instances and broadcasts all
 
-               events to them (in order).
 
-             </summary>
 
-              <remarks>
 
-              This may be more convenient than registering all of the listeners
 
-              directly with the Scheduler, and provides the flexibility of easily changing
 
-              which listeners get notified.
 
-              </remarks>
 
-              <see cref="M:Quartz.Listener.BroadcastSchedulerListener.AddListener(Quartz.ISchedulerListener)"/>
 
-              <see cref="M:Quartz.Listener.BroadcastSchedulerListener.RemoveListener(Quartz.ISchedulerListener)"/>
 
-              <author>James House</author>
 
-              <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Listener.BroadcastSchedulerListener.#ctor(System.Collections.Generic.IEnumerable{Quartz.ISchedulerListener})">
 
-             <summary>
 
-             Construct an instance with the given List of listeners.
 
-             </summary>
 
-             <param name="listeners">The initial List of SchedulerListeners to broadcast to.</param>
 
-         </member>
 
-         <member name="T:Quartz.Listener.BroadcastTriggerListener">
 
-             <summary>
 
-             Holds a List of references to TriggerListener instances and broadcasts all
 
-             events to them (in order).
 
-             </summary>
 
-             <remarks>
 
-             <para>The broadcasting behavior of this listener to delegate listeners may be
 
-             more convenient than registering all of the listeners directly with the
 
-             Scheduler, and provides the flexibility of easily changing which listeners
 
-             get notified.</para>
 
-             </remarks>
 
-             <seealso cref="M:Quartz.Listener.BroadcastTriggerListener.AddListener(Quartz.ITriggerListener)"/>
 
-             <seealso cref="M:Quartz.Listener.BroadcastTriggerListener.RemoveListener(Quartz.ITriggerListener)"/>
 
-             <seealso cref="M:Quartz.Listener.BroadcastTriggerListener.RemoveListener(System.String)"/>
 
-             <author>James House (jhouse AT revolition DOT net)</author>
 
-         </member>
 
-         <member name="T:Quartz.ITriggerListener">
 
-             <summary>
 
-             The interface to be implemented by classes that want to be informed when a
 
-             <see cref="T:Quartz.ITrigger"/> fires. In general, applications that use a
 
-             <see cref="T:Quartz.IScheduler"/> will not have use for this mechanism.
 
-             </summary>
 
-             <seealso cref="T:Quartz.IListenerManager"/>
 
-             <seealso cref="T:Quartz.IMatcher`1"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <seealso cref="T:Quartz.IJobListener"/>
 
-             <seealso cref="T:Quartz.IJobExecutionContext"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.ITriggerListener.TriggerFired(Quartz.ITrigger,Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             has fired, and it's associated <see cref="T:Quartz.IJobDetail"/>
 
-             is about to be executed.
 
-             <para>
 
-             It is called before the <see cref="M:Quartz.ITriggerListener.VetoJobExecution(Quartz.ITrigger,Quartz.IJobExecutionContext)"/> method of this
 
-             interface.
 
-             </para>
 
-             </summary>
 
-             <param name="trigger">The <see cref="T:Quartz.ITrigger"/> that has fired.</param>
 
-             <param name="context">
 
-                 The <see cref="T:Quartz.IJobExecutionContext"/> that will be passed to the <see cref="T:Quartz.IJob"/>'s<see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> method.
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.ITriggerListener.VetoJobExecution(Quartz.ITrigger,Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             has fired, and it's associated <see cref="T:Quartz.IJobDetail"/>
 
-             is about to be executed.
 
-             <para>
 
-             It is called after the <see cref="M:Quartz.ITriggerListener.TriggerFired(Quartz.ITrigger,Quartz.IJobExecutionContext)"/> method of this
 
-             interface.  If the implementation vetoes the execution (via
 
-             returning <see langword="true"/>), the job's execute method will not be called.
 
-             </para>
 
-             </summary>
 
-             <param name="trigger">The <see cref="T:Quartz.ITrigger"/> that has fired.</param>
 
-             <param name="context">The <see cref="T:Quartz.IJobExecutionContext"/> that will be passed to
 
-             the <see cref="T:Quartz.IJob"/>'s<see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> method.</param>
 
-             <returns>Returns true if job execution should be vetoed, false otherwise.</returns>
 
-         </member>
 
-         <member name="M:Quartz.ITriggerListener.TriggerMisfired(Quartz.ITrigger)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             has misfired.
 
-             <para>
 
-             Consideration should be given to how much time is spent in this method,
 
-             as it will affect all triggers that are misfiring.  If you have lots
 
-             of triggers misfiring at once, it could be an issue it this method
 
-             does a lot.
 
-             </para>
 
-             </summary>
 
-             <param name="trigger">The <see cref="T:Quartz.ITrigger"/> that has misfired.</param>
 
-         </member>
 
-         <member name="M:Quartz.ITriggerListener.TriggerComplete(Quartz.ITrigger,Quartz.IJobExecutionContext,Quartz.SchedulerInstruction)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             has fired, it's associated <see cref="T:Quartz.IJobDetail"/>
 
-             has been executed, and it's <see cref="M:Quartz.Spi.IOperableTrigger.Triggered(Quartz.ICalendar)"/> method has been
 
-             called.
 
-             </summary>
 
-             <param name="trigger">The <see cref="T:Quartz.ITrigger"/> that was fired.</param>
 
-             <param name="context">
 
-             The <see cref="T:Quartz.IJobExecutionContext"/> that was passed to the
 
-             <see cref="T:Quartz.IJob"/>'s<see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> method.
 
-             </param>
 
-             <param name="triggerInstructionCode">
 
-             The result of the call on the <see cref="T:Quartz.ITrigger"/>'s<see cref="M:Quartz.Spi.IOperableTrigger.Triggered(Quartz.ICalendar)"/>  method.
 
-             </param>
 
-         </member>
 
-         <member name="P:Quartz.ITriggerListener.Name">
 
-             <summary>
 
-             Get the name of the <see cref="T:Quartz.ITriggerListener"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Listener.BroadcastTriggerListener.#ctor(System.String)">
 
-             <summary>
 
-             Construct an instance with the given name.
 
-             </summary>
 
-             <remarks>
 
-             (Remember to add some delegate listeners!)
 
-             </remarks>
 
-             <param name="name">the name of this instance</param>
 
-         </member>
 
-         <member name="M:Quartz.Listener.BroadcastTriggerListener.#ctor(System.String,System.Collections.Generic.IList{Quartz.ITriggerListener})">
 
-             <summary>
 
-             Construct an instance with the given name, and List of listeners.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="name">the name of this instance</param>
 
-             <param name="listeners">the initial List of TriggerListeners to broadcast to.</param>
 
-         </member>
 
-         <member name="T:Quartz.Listener.JobChainingJobListener">
 
-              <summary>
 
-              Keeps a collection of mappings of which Job to trigger after the completion
 
-              of a given job.  If this listener is notified of a job completing that has a
 
-              mapping, then it will then attempt to trigger the follow-up job.  This
 
-              achieves "job chaining", or a "poor man's workflow".
 
-             </summary>
 
-              <remarks>
 
-              <para>
 
-              Generally an instance of this listener would be registered as a global
 
-              job listener, rather than being registered directly to a given job.
 
-              </para>
 
-              <para>
 
-              If for some reason there is a failure creating the trigger for the
 
-              follow-up job (which would generally only be caused by a rare serious
 
-              failure in the system, or the non-existence of the follow-up job), an error
 
-              message is logged, but no other action is taken. If you need more rigorous
 
-              handling of the error, consider scheduling the triggering of the flow-up
 
-              job within your job itself.
 
-              </para>
 
-             </remarks>
 
-              <author>James House</author>
 
-              <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Listener.JobListenerSupport">
 
-             <summary>
 
-             A helpful abstract base class for implementors of <see cref="T:Quartz.IJobListener"/>.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The methods in this class are empty so you only need to override the  
 
-             subset for the <see cref="T:Quartz.IJobListener"/> events you care about.
 
-             </para>
 
-             
 
-             <para>
 
-             You are required to implement <see cref="P:Quartz.IJobListener.Name"/> 
 
-             to return the unique name of your <see cref="T:Quartz.IJobListener"/>.  
 
-             </para>
 
-             </remarks>
 
-             <author>Marko Lahma (.NET)</author>
 
-             <seealso cref="T:Quartz.IJobListener"/>
 
-         </member>
 
-         <member name="M:Quartz.Listener.JobListenerSupport.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Listener.JobListenerSupport"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Listener.JobListenerSupport.JobToBeExecuted(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             is about to be executed (an associated <see cref="T:Quartz.ITrigger"/>
 
-             has occurred).
 
-             <para>
 
-             This method will not be invoked if the execution of the Job was vetoed
 
-             by a <see cref="T:Quartz.ITriggerListener"/>.
 
-             </para>
 
-             </summary>
 
-             <param name="context"></param>
 
-             <seealso cref="M:Quartz.Listener.JobListenerSupport.JobExecutionVetoed(Quartz.IJobExecutionContext)"/>
 
-         </member>
 
-         <member name="M:Quartz.Listener.JobListenerSupport.JobExecutionVetoed(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             was about to be executed (an associated <see cref="T:Quartz.ITrigger"/>
 
-             has occurred), but a <see cref="T:Quartz.ITriggerListener"/> vetoed it's
 
-             execution.
 
-             </summary>
 
-             <param name="context"></param>
 
-             <seealso cref="M:Quartz.Listener.JobListenerSupport.JobToBeExecuted(Quartz.IJobExecutionContext)"/>
 
-         </member>
 
-         <member name="M:Quartz.Listener.JobListenerSupport.JobWasExecuted(Quartz.IJobExecutionContext,Quartz.JobExecutionException)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> after a <see cref="T:Quartz.IJobDetail"/>
 
-             has been executed, and be for the associated <see cref="T:Quartz.ITrigger"/>'s
 
-             <see cref="M:Quartz.Spi.IOperableTrigger.Triggered(Quartz.ICalendar)"/> method has been called.
 
-             </summary>
 
-             <param name="context"></param>
 
-             <param name="jobException"></param>
 
-         </member>
 
-         <member name="P:Quartz.Listener.JobListenerSupport.Log">
 
-             <summary>
 
-             Get the <see cref="T:Common.Logging.ILog"/> for this  class's category.  
 
-             This should be used by subclasses for logging.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Listener.JobListenerSupport.Name">
 
-             <summary>
 
-             Get the name of the <see cref="T:Quartz.IJobListener"/>.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="M:Quartz.Listener.JobChainingJobListener.#ctor(System.String)">
 
-             <summary>
 
-             Construct an instance with the given name.
 
-             </summary>
 
-             <param name="name">The name of this instance.</param>
 
-         </member>
 
-         <member name="M:Quartz.Listener.JobChainingJobListener.AddJobChainLink(Quartz.JobKey,Quartz.JobKey)">
 
-             <summary>
 
-             Add a chain mapping - when the Job identified by the first key completes
 
-             the job identified by the second key will be triggered.
 
-             </summary>
 
-             <param name="firstJob">a JobKey with the name and group of the first job</param>
 
-             <param name="secondJob">a JobKey with the name and group of the follow-up job</param>
 
-         </member>
 
-         <member name="T:Quartz.Listener.TriggerListenerSupport">
 
-              <summary>
 
-               A helpful abstract base class for implementors of 
 
-              <see cref="T:Quartz.ITriggerListener"/>.
 
-               </summary>
 
-              <remarks>
 
-              <para>
 
-              The methods in this class are empty so you only need to override the  
 
-              subset for the <see cref="T:Quartz.ITriggerListener"/> events
 
-              you care about.
 
-              </para>
 
-              
 
-              <para>
 
-              You are required to implement <see cref="P:Quartz.ITriggerListener.Name"/> 
 
-              to return the unique name of your <see cref="T:Quartz.ITriggerListener"/>.  
 
-              </para>
 
-             </remarks>
 
-              <author>Marko Lahma (.NET)</author>
 
-              <seealso cref="T:Quartz.ITriggerListener"/>
 
-         </member>
 
-         <member name="P:Quartz.Listener.TriggerListenerSupport.Log">
 
-             <summary>
 
-             Get the <see cref="T:Common.Logging.ILog"/> for this
 
-             class's category.  This should be used by subclasses for logging.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Listener.TriggerListenerSupport.Name">
 
-             <summary>
 
-             Get the name of the <see cref="T:Quartz.ITriggerListener"/>.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="T:Quartz.Plugin.History.LoggingJobHistoryPlugin">
 
-             <summary>
 
-             Logs a history of all job executions (and execution vetoes) via common
 
-             logging.
 
-             </summary>
 
-             <remarks>
 
-             	<para>
 
-             The logged message is customizable by setting one of the following message
 
-             properties to a string that conforms to the syntax of <see cref="M:System.String.Format(System.String,System.Object)"/>.
 
-             </para>
 
-             	<para>
 
-             JobToBeFiredMessage - available message data are: <table>
 
-             			<tr>
 
-             				<th>Element</th>
 
-             				<th>Data Type</th>
 
-             				<th>Description</th>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>0</td>
 
-             				<td>String</td>
 
-             				<td>The Job's Name.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>1</td>
 
-             				<td>String</td>
 
-             				<td>The Job's Group.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>2</td>
 
-             				<td>Date</td>
 
-             				<td>The current time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>3</td>
 
-             				<td>String</td>
 
-             				<td>The Trigger's name.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>4</td>
 
-             				<td>String</td>
 
-             				<td>The Trigger's group.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>5</td>
 
-             				<td>Date</td>
 
-             				<td>The scheduled fire time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>6</td>
 
-             				<td>Date</td>
 
-             				<td>The next scheduled fire time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>7</td>
 
-             				<td>Integer</td>
 
-             				<td>The re-fire count from the JobExecutionContext.</td>
 
-             			</tr>
 
-             		</table>
 
-             The default message text is <i>"Job {1}.{0} fired (by trigger {4}.{3}) at: {2:HH:mm:ss MM/dd/yyyy}"</i>
 
-             	</para>
 
-             	<para>
 
-             JobSuccessMessage - available message data are: <table>
 
-             			<tr>
 
-             				<th>Element</th>
 
-             				<th>Data Type</th>
 
-             				<th>Description</th>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>0</td>
 
-             				<td>String</td>
 
-             				<td>The Job's Name.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>1</td>
 
-             				<td>String</td>
 
-             				<td>The Job's Group.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>2</td>
 
-             				<td>Date</td>
 
-             				<td>The current time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>3</td>
 
-             				<td>String</td>
 
-             				<td>The Trigger's name.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>4</td>
 
-             				<td>String</td>
 
-             				<td>The Trigger's group.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>5</td>
 
-             				<td>Date</td>
 
-             				<td>The scheduled fire time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>6</td>
 
-             				<td>Date</td>
 
-             				<td>The next scheduled fire time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>7</td>
 
-             				<td>Integer</td>
 
-             				<td>The re-fire count from the JobExecutionContext.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>8</td>
 
-             				<td>Object</td>
 
-             				<td>The string value (toString() having been called) of the result (if any) 
 
-             that the Job set on the JobExecutionContext, with on it.  "NULL" if no 
 
-             result was set.</td>
 
-             			</tr>
 
-             		</table>
 
-             The default message text is <i>"Job {1}.{0} execution complete at {2:HH:mm:ss MM/dd/yyyy} and reports: {8}"</i>
 
-             	</para>
 
-             	<para>
 
-             JobFailedMessage - available message data are: <table>
 
-             			<tr>
 
-             				<th>Element</th>
 
-             				<th>Data Type</th>
 
-             				<th>Description</th>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>0</td>
 
-             				<td>String</td>
 
-             				<td>The Job's Name.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>1</td>
 
-             				<td>String</td>
 
-             				<td>The Job's Group.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>2</td>
 
-             				<td>Date</td>
 
-             				<td>The current time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>3</td>
 
-             				<td>String</td>
 
-             				<td>The Trigger's name.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>4</td>
 
-             				<td>String</td>
 
-             				<td>The Trigger's group.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>5</td>
 
-             				<td>Date</td>
 
-             				<td>The scheduled fire time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>6</td>
 
-             				<td>Date</td>
 
-             				<td>The next scheduled fire time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>7</td>
 
-             				<td>Integer</td>
 
-             				<td>The re-fire count from the JobExecutionContext.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>8</td>
 
-             				<td>String</td>
 
-             				<td>The message from the thrown JobExecution Exception.
 
-             </td>
 
-             			</tr>
 
-             		</table>
 
-             The default message text is <i>"Job {1}.{0} execution failed at {2:HH:mm:ss MM/dd/yyyy} and reports: {8}"</i>
 
-             	</para>
 
-             	<para>
 
-             JobWasVetoedMessage - available message data are: <table>
 
-             			<tr>
 
-             				<th>Element</th>
 
-             				<th>Data Type</th>
 
-             				<th>Description</th>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>0</td>
 
-             				<td>String</td>
 
-             				<td>The Job's Name.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>1</td>
 
-             				<td>String</td>
 
-             				<td>The Job's Group.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>2</td>
 
-             				<td>Date</td>
 
-             				<td>The current time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>3</td>
 
-             				<td>String</td>
 
-             				<td>The Trigger's name.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>4</td>
 
-             				<td>String</td>
 
-             				<td>The Trigger's group.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>5</td>
 
-             				<td>Date</td>
 
-             				<td>The scheduled fire time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>6</td>
 
-             				<td>Date</td>
 
-             				<td>The next scheduled fire time.</td>
 
-             			</tr>
 
-             			<tr>
 
-             				<td>7</td>
 
-             				<td>Integer</td>
 
-             				<td>The re-fire count from the JobExecutionContext.</td>
 
-             			</tr>
 
-             		</table>
 
-             The default message text is <i>"Job {1}.{0} was vetoed.  It was to be fired 
 
-             (by trigger {4}.{3}) at: {2:HH:mm:ss MM/dd/yyyy}"</i>
 
-             	</para>
 
-             </remarks>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Spi.ISchedulerPlugin">
 
-             <summary>
 
-             Provides an interface for a class to become a "plugin" to Quartz.
 
-             </summary>
 
-             <remarks>
 
-             Plugins can do virtually anything you wish, though the most interesting ones
 
-             will obviously interact with the scheduler in some way - either actively: by
 
-             invoking actions on the scheduler, or passively: by being a <see cref="T:Quartz.IJobListener"/>,
 
-             <see cref="T:Quartz.ITriggerListener"/>, and/or <see cref="T:Quartz.ISchedulerListener"/>.
 
-             <para>
 
-             If you use <see cref="T:Quartz.Impl.StdSchedulerFactory"/> to
 
-             Initialize your Scheduler, it can also create and Initialize your plugins -
 
-             look at the configuration docs for details.
 
-             </para>
 
-             <para>
 
-             If you need direct access your plugin, you can have it explicitly put a 
 
-             reference to itself in the <see cref="T:Quartz.IScheduler"/>'s 
 
-             <see cref="T:Quartz.SchedulerContext"/> as part of its
 
-             <see cref="M:Quartz.Spi.ISchedulerPlugin.Initialize(System.String,Quartz.IScheduler)"/> method.
 
-             </para>
 
-             </remarks>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ISchedulerPlugin.Initialize(System.String,Quartz.IScheduler)">
 
-             <summary>
 
-             Called during creation of the <see cref="T:Quartz.IScheduler"/> in order to give
 
-             the <see cref="T:Quartz.Spi.ISchedulerPlugin"/> a chance to Initialize.
 
-             </summary>
 
-             <remarks>
 
-             At this point, the Scheduler's <see cref="T:Quartz.Spi.IJobStore"/> is not yet
 
-             <para>
 
-             If you need direct access your plugin, you can have it explicitly put a 
 
-             reference to itself in the <see cref="T:Quartz.IScheduler"/>'s 
 
-             <see cref="T:Quartz.SchedulerContext"/> as part of its
 
-             <see cref="M:Quartz.Spi.ISchedulerPlugin.Initialize(System.String,Quartz.IScheduler)"/> method.
 
-             </para>
 
-             </remarks>
 
-             <param name="pluginName">
 
-             The name by which the plugin is identified.
 
-             </param>
 
-             <param name="sched">
 
-             The scheduler to which the plugin is registered.
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ISchedulerPlugin.Start">
 
-             <summary>
 
-             Called when the associated <see cref="T:Quartz.IScheduler"/> is started, in order
 
-             to let the plug-in know it can now make calls into the scheduler if it
 
-             needs to.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ISchedulerPlugin.Shutdown">
 
-             <summary>
 
-             Called in order to inform the <see cref="T:Quartz.Spi.ISchedulerPlugin"/> that it
 
-             should free up all of it's resources because the scheduler is shutting
 
-             down.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingJobHistoryPlugin.Initialize(System.String,Quartz.IScheduler)">
 
-             <summary>
 
-             Called during creation of the <see cref="T:Quartz.IScheduler"/> in order to give
 
-             the <see cref="T:Quartz.Spi.ISchedulerPlugin"/> a chance to Initialize.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingJobHistoryPlugin.Start">
 
-             <summary>
 
-             Called when the associated <see cref="T:Quartz.IScheduler"/> is started, in order
 
-             to let the plug-in know it can now make calls into the scheduler if it
 
-             needs to.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingJobHistoryPlugin.Shutdown">
 
-             <summary> 
 
-             Called in order to inform the <see cref="T:Quartz.Spi.ISchedulerPlugin"/> that it
 
-             should free up all of it's resources because the scheduler is shutting
 
-             down.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingJobHistoryPlugin.JobToBeExecuted(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-                 Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/> is
 
-                 about to be executed (an associated <see cref="T:Quartz.ITrigger"/> has occurred). 
 
-                 <para>
 
-                     This method will not be invoked if the execution of the Job was vetoed by a
 
-                     <see cref="T:Quartz.ITriggerListener"/>.
 
-                 </para>
 
-             </summary>
 
-             <seealso cref="M:Quartz.Plugin.History.LoggingJobHistoryPlugin.JobExecutionVetoed(Quartz.IJobExecutionContext)"/>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingJobHistoryPlugin.JobWasExecuted(Quartz.IJobExecutionContext,Quartz.JobExecutionException)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> after a <see cref="T:Quartz.IJobDetail"/>
 
-             has been executed, and be for the associated <see cref="T:Quartz.ITrigger"/>'s
 
-             <see cref="M:Quartz.Spi.IOperableTrigger.Triggered(Quartz.ICalendar)"/> method has been called.
 
-             </summary>
 
-             <param name="context"></param>
 
-             <param name="jobException"></param>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingJobHistoryPlugin.JobExecutionVetoed(Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.IJobDetail"/>
 
-             was about to be executed (an associated <see cref="T:Quartz.ITrigger"/>
 
-             has occurred), but a <see cref="T:Quartz.ITriggerListener"/> vetoed it's
 
-             execution.
 
-             </summary>
 
-             <param name="context"></param>
 
-             <seealso cref="M:Quartz.Plugin.History.LoggingJobHistoryPlugin.JobToBeExecuted(Quartz.IJobExecutionContext)"/>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingJobHistoryPlugin.Log">
 
-             <summary>
 
-             Logger instance to use. Defaults to common logging.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingJobHistoryPlugin.JobSuccessMessage">
 
-             <summary> 
 
-             Get or sets the message that is logged when a Job successfully completes its 
 
-             execution.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingJobHistoryPlugin.JobFailedMessage">
 
-             <summary> 
 
-             Get or sets the message that is logged when a Job fails its 
 
-             execution.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingJobHistoryPlugin.JobToBeFiredMessage">
 
-             <summary> 
 
-             Gets or sets the message that is logged when a Job is about to Execute.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingJobHistoryPlugin.JobWasVetoedMessage">
 
-             <summary> 
 
-             Gets or sets the message that is logged when a Job execution is vetoed by a
 
-             trigger listener.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingJobHistoryPlugin.Name">
 
-             <summary>
 
-             Get the name of the <see cref="T:Quartz.IJobListener"/>.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="T:Quartz.Plugin.History.LoggingTriggerHistoryPlugin">
 
-             <summary> 
 
-             Logs a history of all trigger firings via the Jakarta Commons-Logging
 
-             framework.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The logged message is customizable by setting one of the following message
 
-             properties to a string that conforms to the syntax of <see cref="M:System.String.Format(System.String,System.Object[])"/>.
 
-             </para>
 
-             
 
-             <para>
 
-             TriggerFiredMessage - available message data are: <table>
 
-             <tr>
 
-             <th>Element</th>
 
-             <th>Data Type</th>
 
-             <th>Description</th>
 
-             </tr>
 
-             <tr>
 
-             <td>0</td>
 
-             <td>String</td>
 
-             <td>The Trigger's Name.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>1</td>
 
-             <td>String</td>
 
-             <td>The Trigger's Group.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>2</td>
 
-             <td>Date</td>
 
-             <td>The scheduled fire time.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>3</td>
 
-             <td>Date</td>
 
-             <td>The next scheduled fire time.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>4</td>
 
-             <td>Date</td>
 
-             <td>The actual fire time.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>5</td>
 
-             <td>String</td>
 
-             <td>The Job's name.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>6</td>
 
-             <td>String</td>
 
-             <td>The Job's group.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>7</td>
 
-             <td>Integer</td>
 
-             <td>The re-fire count from the JobExecutionContext.</td>
 
-             </tr>
 
-             </table>
 
-             
 
-             The default message text is <i>"Trigger {1}.{0} fired job {6}.{5} at: {4,
 
-             date, HH:mm:ss MM/dd/yyyy"</i>
 
-             </para>
 
-             
 
-             <para>
 
-             TriggerMisfiredMessage - available message data are: <table>
 
-             <tr>
 
-             <th>Element</th>
 
-             <th>Data Type</th>
 
-             <th>Description</th>
 
-             </tr>
 
-             <tr>
 
-             <td>0</td>
 
-             <td>String</td>
 
-             <td>The Trigger's Name.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>1</td>
 
-             <td>String</td>
 
-             <td>The Trigger's Group.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>2</td>
 
-             <td>Date</td>
 
-             <td>The scheduled fire time.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>3</td>
 
-             <td>Date</td>
 
-             <td>The next scheduled fire time.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>4</td>
 
-             <td>Date</td>
 
-             <td>The actual fire time. (the time the misfire was detected/handled)</td>
 
-             </tr>
 
-             <tr>
 
-             <td>5</td>
 
-             <td>String</td>
 
-             <td>The Job's name.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>6</td>
 
-             <td>String</td>
 
-             <td>The Job's group.</td>
 
-             </tr>
 
-             </table>
 
-             
 
-             The default message text is <i>"Trigger {1}.{0} misfired job {6}.{5} at:
 
-             {4, date, HH:mm:ss MM/dd/yyyy}. Should have fired at: {3, date, HH:mm:ss
 
-             MM/dd/yyyy"</i>
 
-             </para>
 
-             
 
-             <para>
 
-             TriggerCompleteMessage - available message data are: <table>
 
-             <tr>
 
-             <th>Element</th>
 
-             <th>Data Type</th>
 
-             <th>Description</th>
 
-             </tr>
 
-             <tr>
 
-             <td>0</td>
 
-             <td>String</td>
 
-             <td>The Trigger's Name.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>1</td>
 
-             <td>String</td>
 
-             <td>The Trigger's Group.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>2</td>
 
-             <td>Date</td>
 
-             <td>The scheduled fire time.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>3</td>
 
-             <td>Date</td>
 
-             <td>The next scheduled fire time.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>4</td>
 
-             <td>Date</td>
 
-             <td>The job completion time.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>5</td>
 
-             <td>String</td>
 
-             <td>The Job's name.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>6</td>
 
-             <td>String</td>
 
-             <td>The Job's group.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>7</td>
 
-             <td>Integer</td>
 
-             <td>The re-fire count from the JobExecutionContext.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>8</td>
 
-             <td>Integer</td>
 
-             <td>The trigger's resulting instruction code.</td>
 
-             </tr>
 
-             <tr>
 
-             <td>9</td>
 
-             <td>String</td>
 
-             <td>A human-readable translation of the trigger's resulting instruction
 
-             code.</td>
 
-             </tr>
 
-             </table>
 
-             
 
-             The default message text is <i>"Trigger {1}.{0} completed firing job
 
-             {6}.{5} at {4, date, HH:mm:ss MM/dd/yyyy} with resulting trigger instruction
 
-             code: {9"</i>
 
-             </para>
 
-             </remarks>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.Initialize(System.String,Quartz.IScheduler)">
 
-             <summary>
 
-             Called during creation of the <see cref="T:Quartz.IScheduler"/> in order to give
 
-             the <see cref="T:Quartz.Spi.ISchedulerPlugin"/> a chance to Initialize.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.Start">
 
-             <summary>
 
-             Called when the associated <see cref="T:Quartz.IScheduler"/> is started, in order
 
-             to let the plug-in know it can now make calls into the scheduler if it
 
-             needs to.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.Shutdown">
 
-             <summary>
 
-             Called in order to inform the <see cref="T:Quartz.Spi.ISchedulerPlugin"/> that it
 
-             should free up all of it's resources because the scheduler is shutting
 
-             down.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.TriggerFired(Quartz.ITrigger,Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             has fired, and it's associated <see cref="T:Quartz.IJobDetail"/>
 
-             is about to be executed.
 
-             <para>
 
-             It is called before the <see cref="M:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.VetoJobExecution(Quartz.ITrigger,Quartz.IJobExecutionContext)"/> method of this
 
-             interface.
 
-             </para>
 
-             </summary>
 
-             <param name="trigger">The <see cref="T:Quartz.ITrigger"/> that has fired.</param>
 
-             <param name="context">The <see cref="T:Quartz.IJobExecutionContext"/> that will be passed to the <see cref="T:Quartz.IJob"/>'s <see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> method.</param>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.TriggerMisfired(Quartz.ITrigger)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             has misfired.
 
-             <para>
 
-             Consideration should be given to how much time is spent in this method,
 
-             as it will affect all triggers that are misfiring.  If you have lots
 
-             of triggers misfiring at once, it could be an issue it this method
 
-             does a lot.
 
-             </para>
 
-             </summary>
 
-             <param name="trigger">The <see cref="T:Quartz.ITrigger"/> that has misfired.</param>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.TriggerComplete(Quartz.ITrigger,Quartz.IJobExecutionContext,Quartz.SchedulerInstruction)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             has fired, it's associated <see cref="T:Quartz.IJobDetail"/>
 
-             has been executed, and it's <see cref="M:Quartz.Spi.IOperableTrigger.Triggered(Quartz.ICalendar)"/> method has been
 
-             called.
 
-             </summary>
 
-             <param name="trigger">The <see cref="T:Quartz.ITrigger"/> that was fired.</param>
 
-             <param name="context">The <see cref="T:Quartz.IJobExecutionContext"/> that was passed to the
 
-             <see cref="T:Quartz.IJob"/>'s <see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> method.</param>
 
-             <param name="triggerInstructionCode">The result of the call on the <see cref="T:Quartz.Spi.IOperableTrigger"/>'s <see cref="M:Quartz.Spi.IOperableTrigger.Triggered(Quartz.ICalendar)"/>  method.</param>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.VetoJobExecution(Quartz.ITrigger,Quartz.IJobExecutionContext)">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a <see cref="T:Quartz.ITrigger"/>
 
-             has fired, and it's associated <see cref="T:Quartz.IJobDetail"/>
 
-             is about to be executed.
 
-             <para>
 
-             It is called after the <see cref="M:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.TriggerFired(Quartz.ITrigger,Quartz.IJobExecutionContext)"/> method of this
 
-             interface.
 
-             </para>
 
-             </summary>
 
-             <param name="trigger">The <see cref="T:Quartz.ITrigger"/> that has fired.</param>
 
-             <param name="context">The <see cref="T:Quartz.IJobExecutionContext"/> that will be passed to
 
-             the <see cref="T:Quartz.IJob"/>'s <see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> method.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.Log">
 
-             <summary>
 
-             Logger instance to use. Defaults to common logging.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.TriggerCompleteMessage">
 
-             <summary> 
 
-             Get or set the message that is printed upon the completion of a trigger's
 
-             firing.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.TriggerFiredMessage">
 
-             <summary> 
 
-             Get or set the message that is printed upon a trigger's firing.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.TriggerMisfiredMessage">
 
-             <summary> 
 
-             Get or set the message that is printed upon a trigger's mis-firing.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.History.LoggingTriggerHistoryPlugin.Name">
 
-             <summary>
 
-             Get the name of the <see cref="T:Quartz.ITriggerListener"/>.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="T:Quartz.Plugin.Management.ShutdownHookPlugin">
 
-             <summary> 
 
-             This plugin catches the event of the VM terminating (such as upon a CRTL-C)
 
-             and tells the scheduler to Shutdown.
 
-             </summary>
 
-             <seealso cref="M:Quartz.IScheduler.Shutdown(System.Boolean)"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.Management.ShutdownHookPlugin.Initialize(System.String,Quartz.IScheduler)">
 
-             <summary>
 
-             Called during creation of the <see cref="T:Quartz.IScheduler"/> in order to give
 
-             the <see cref="T:Quartz.Spi.ISchedulerPlugin"/> a chance to Initialize.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.Management.ShutdownHookPlugin.Start">
 
-             <summary>
 
-             Called when the associated <see cref="T:Quartz.IScheduler"/> is started, in order
 
-             to let the plug-in know it can now make calls into the scheduler if it
 
-             needs to.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.Management.ShutdownHookPlugin.Shutdown">
 
-             <summary>
 
-             Called in order to inform the <see cref="T:Quartz.Spi.ISchedulerPlugin"/> that it
 
-             should free up all of it's resources because the scheduler is shutting
 
-             down.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.Management.ShutdownHookPlugin.CleanShutdown">
 
-             <summary> 
 
-             Determine whether or not the plug-in is configured to cause a clean
 
-             Shutdown of the scheduler.
 
-             <para>
 
-             The default value is <see langword="true"/>.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="M:Quartz.IScheduler.Shutdown(System.Boolean)"/>
 
-         </member>
 
-         <member name="T:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin">
 
-              <summary> 
 
-              This plugin loads XML file(s) to add jobs and schedule them with triggers
 
-              as the scheduler is initialized, and can optionally periodically scan the
 
-              file for changes.
 
-             </summary>
 
-              <remarks>
 
-              The periodically scanning of files for changes is not currently supported in a 
 
-              clustered environment.
 
-              </remarks> 
 
-              <author>James House</author>
 
-              <author>Pierre Awaragi</author>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.FileUpdated(System.String)">
 
-             <summary>
 
-             
 
-             </summary>
 
-             <param name="fName"></param>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.Initialize(System.String,Quartz.IScheduler)">
 
-             <summary>
 
-             Called during creation of the <see cref="T:Quartz.IScheduler"/> in order to give
 
-             the <see cref="T:Quartz.Spi.ISchedulerPlugin"/> a chance to initialize.
 
-             </summary>
 
-             <param name="pluginName">The name.</param>
 
-             <param name="sched">The scheduler.</param>
 
-             <throws>SchedulerConfigException </throws>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.Start">
 
-             <summary>
 
-             Called when the associated <see cref="T:Quartz.IScheduler"/> is started, in order
 
-             to let the plug-in know it can now make calls into the scheduler if it
 
-             needs to.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.BuildJobTriggerName(System.String)">
 
-             <summary>
 
-             Helper method for generating unique job/trigger name for the  
 
-             file scanning jobs (one per FileJob).  The unique names are saved
 
-             in jobTriggerNameSet.
 
-             </summary>
 
-             <param name="fileBasename"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.Shutdown">
 
-             <summary>
 
-             Called in order to inform the <see cref="T:Quartz.Spi.ISchedulerPlugin"/> that it
 
-             should free up all of it's resources because the scheduler is shutting
 
-             down.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.Log">
 
-             <summary>
 
-             Gets the log.
 
-             </summary>
 
-             <value>The log.</value>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.FileNames">
 
-             <summary> 
 
-             Comma separated list of file names (with paths) to the XML files that should be read.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.ScanInterval">
 
-             <summary> 
 
-             The interval at which to scan for changes to the file.  
 
-             If the file has been changed, it is re-loaded and parsed.   The default 
 
-             value for the interval is 0, which disables scanning.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.FailOnFileNotFound">
 
-             <summary> 
 
-             Whether or not initialization of the plugin should fail (throw an
 
-             exception) if the file cannot be found. Default is <see langword="true" />.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Plugin.Xml.XMLSchedulingDataProcessorPlugin.JobFile">
 
-             <summary>
 
-             Information about a file that should be processed by <see cref="T:Quartz.Xml.XMLSchedulingDataProcessor"/>. 
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.DefaultObjectSerializer">
 
-             <summary>
 
-             Default object serialization strategy that uses <see cref="T:System.Runtime.Serialization.Formatters.Binary.BinaryFormatter"/> 
 
-             under the hood.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="T:Quartz.Spi.IObjectSerializer">
 
-             <summary>
 
-             Interface for object serializers.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-             <seealso cref="T:Quartz.Simpl.DefaultObjectSerializer"/>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IObjectSerializer.Serialize``1(``0)">
 
-             <summary>
 
-             Serializes given object as bytes 
 
-             that can be stored to permanent stores.
 
-             </summary>
 
-             <param name="obj">Object to serialize, always non-null.</param>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IObjectSerializer.DeSerialize``1(System.Byte[])">
 
-             <summary>
 
-             Deserializes object from byte array presentation.
 
-             </summary>
 
-             <param name="data">Data to deserialize object from, always non-null and non-empty.</param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.DefaultObjectSerializer.Serialize``1(``0)">
 
-             <summary>
 
-             Serializes given object as bytes 
 
-             that can be stored to permanent stores.
 
-             </summary>
 
-             <param name="obj">Object to serialize.</param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.DefaultObjectSerializer.DeSerialize``1(System.Byte[])">
 
-             <summary>
 
-             Deserializes object from byte array presentation.
 
-             </summary>
 
-             <param name="data">Data to deserialize object from.</param>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.HostNameBasedIdGenerator">
 
-             <summary>
 
-             Helper base class for host name lookup requiring instance id generators.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="T:Quartz.Spi.IInstanceIdGenerator">
 
-             <summary>
 
-             An IInstanceIdGenerator is responsible for generating the clusterwide unique 
 
-             instance id for a <see cref="T:Quartz.IScheduler"/> node.
 
-             </summary>
 
-             <remarks>
 
-             This interface may be of use to those wishing to have specific control over 
 
-             the mechanism by which the <see cref="T:Quartz.IScheduler"/> instances in their 
 
-             application are named.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.Simpl.SimpleInstanceIdGenerator"/>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IInstanceIdGenerator.GenerateInstanceId">
 
-             <summary>
 
-             Generate the instance id for a <see cref="T:Quartz.IScheduler"/>
 
-             </summary>
 
-             <returns> The clusterwide unique instance id.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.HostNameBasedIdGenerator.GenerateInstanceId">
 
-             <summary>
 
-             Generate the instance id for a <see cref="T:Quartz.IScheduler"/>
 
-             </summary>
 
-             <returns> The clusterwide unique instance id.
 
-             </returns>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.HostnameInstanceIdGenerator">
 
-             <summary>
 
-             <see cref="T:Quartz.Spi.IInstanceIdGenerator"/> that names the scheduler instance using 
 
-             just the machine hostname.
 
-             </summary>
 
-             <remarks>
 
-             This class is useful when you know that your scheduler instance will be the 
 
-             only one running on a particular machine.  Each time the scheduler is 
 
-             restarted, it will get the same instance id as long as the machine is not 
 
-             renamed.
 
-             </remarks>
 
-             <author>Marko Lahma (.NET)</author>
 
-             <seealso cref="T:Quartz.Spi.IInstanceIdGenerator"/>
 
-             <seealso cref="T:Quartz.Simpl.SimpleInstanceIdGenerator"/>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.HostnameInstanceIdGenerator.GenerateInstanceId">
 
-             <summary>
 
-             Generate the instance id for a <see cref="T:Quartz.IScheduler"/>
 
-             </summary>
 
-             <returns>The clusterwide unique instance id.</returns>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.PropertySettingJobFactory">
 
-             <summary> 
 
-             A JobFactory that instantiates the Job instance (using the default no-arg
 
-             constructor, or more specifically: <see cref="M:Quartz.Util.ObjectUtils.InstantiateType``1(System.Type)"/>), and
 
-             then attempts to set all values from the <see cref="T:Quartz.IJobExecutionContext"/> and
 
-             the <see cref="T:Quartz.IJobExecutionContext"/>'s merged <see cref="T:Quartz.JobDataMap"/> onto 
 
-             properties of the job.
 
-             </summary>
 
-             <remarks>   
 
-             Set the WarnIfPropertyNotFound property to true if you'd like noisy logging in
 
-             the case of values in the <see cref="T:Quartz.JobDataMap"/> not mapping to properties on your job
 
-             class. This may be useful for troubleshooting typos of property names, etc.
 
-             but very noisy if you regularly (and purposely) have extra things in your
 
-              <see cref="T:Quartz.JobDataMap"/>.
 
-             Also of possible interest is the ThrowIfPropertyNotFound property which
 
-             will throw exceptions on unmatched JobDataMap keys.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.Spi.IJobFactory"/>
 
-             <seealso cref="T:Quartz.Simpl.SimpleJobFactory"/>
 
-             <seealso cref="T:Quartz.SchedulerContext"/>
 
-             <seealso cref="P:Quartz.IJobExecutionContext.MergedJobDataMap"/>
 
-             <seealso cref="P:Quartz.Simpl.PropertySettingJobFactory.WarnIfPropertyNotFound"/>
 
-             <seealso cref="P:Quartz.Simpl.PropertySettingJobFactory.ThrowIfPropertyNotFound"/>
 
-             <author>James Houser</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.SimpleJobFactory">
 
-             <summary> 
 
-             The default JobFactory used by Quartz - simply calls 
 
-             <see cref="M:Quartz.Util.ObjectUtils.InstantiateType``1(System.Type)"/> on the job class.
 
-             </summary>
 
-             <seealso cref="T:Quartz.Spi.IJobFactory"/>
 
-             <seealso cref="T:Quartz.Simpl.PropertySettingJobFactory"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Spi.IJobFactory">
 
-             <summary>
 
-             A JobFactory is responsible for producing instances of <see cref="T:Quartz.IJob"/>
 
-             classes.
 
-             </summary>
 
-             <remarks>
 
-             This interface may be of use to those wishing to have their application
 
-             produce <see cref="T:Quartz.IJob"/> instances via some special mechanism, such as to
 
-             give the opportunity for dependency injection.
 
-             </remarks>
 
-             <seealso cref="P:Quartz.IScheduler.JobFactory"/>
 
-             <seealso cref="T:Quartz.Simpl.SimpleJobFactory"/>
 
-             <seealso cref="T:Quartz.Simpl.PropertySettingJobFactory"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobFactory.NewJob(Quartz.Spi.TriggerFiredBundle,Quartz.IScheduler)">
 
-             <summary> 
 
-             Called by the scheduler at the time of the trigger firing, in order to
 
-             produce a <see cref="T:Quartz.IJob"/> instance on which to call Execute.
 
-             </summary>
 
-             <remarks>
 
-             It should be extremely rare for this method to throw an exception -
 
-             basically only the the case where there is no way at all to instantiate
 
-             and prepare the Job for execution.  When the exception is thrown, the
 
-             Scheduler will move all triggers associated with the Job into the
 
-             <see cref="F:Quartz.TriggerState.Error"/> state, which will require human
 
-             intervention (e.g. an application restart after fixing whatever 
 
-             configuration problem led to the issue with instantiating the Job. 
 
-             </remarks>
 
-             <param name="bundle">
 
-               The TriggerFiredBundle from which the <see cref="T:Quartz.IJobDetail"/>
 
-               and other info relating to the trigger firing can be obtained.
 
-             </param>
 
-             <param name="scheduler">a handle to the scheduler that is about to execute the job</param>
 
-             <throws>  SchedulerException if there is a problem instantiating the Job. </throws>
 
-             <returns> the newly instantiated Job
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IJobFactory.ReturnJob(Quartz.IJob)">
 
-             <summary>
 
-             Allows the the job factory to destroy/cleanup the job if needed.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleJobFactory.NewJob(Quartz.Spi.TriggerFiredBundle,Quartz.IScheduler)">
 
-             <summary>
 
-             Called by the scheduler at the time of the trigger firing, in order to
 
-             produce a <see cref="T:Quartz.IJob"/> instance on which to call Execute.
 
-             </summary>
 
-             <remarks>
 
-             It should be extremely rare for this method to throw an exception -
 
-             basically only the the case where there is no way at all to instantiate
 
-             and prepare the Job for execution.  When the exception is thrown, the
 
-             Scheduler will move all triggers associated with the Job into the
 
-             <see cref="F:Quartz.TriggerState.Error"/> state, which will require human
 
-             intervention (e.g. an application restart after fixing whatever
 
-             configuration problem led to the issue with instantiating the Job.
 
-             </remarks>
 
-             <param name="bundle">The TriggerFiredBundle from which the <see cref="T:Quartz.IJobDetail"/>
 
-               and other info relating to the trigger firing can be obtained.</param>
 
-             <param name="scheduler"></param>
 
-             <returns>the newly instantiated Job</returns>
 
-             <throws>  SchedulerException if there is a problem instantiating the Job. </throws>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleJobFactory.ReturnJob(Quartz.IJob)">
 
-             <summary>
 
-             Allows the the job factory to destroy/cleanup the job if needed. 
 
-             No-op when using SimpleJobFactory.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.PropertySettingJobFactory.NewJob(Quartz.Spi.TriggerFiredBundle,Quartz.IScheduler)">
 
-             <summary>
 
-             Called by the scheduler at the time of the trigger firing, in order to
 
-             produce a <see cref="T:Quartz.IJob"/> instance on which to call Execute.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             It should be extremely rare for this method to throw an exception -
 
-             basically only the the case where there is no way at all to instantiate
 
-             and prepare the Job for execution.  When the exception is thrown, the
 
-             Scheduler will move all triggers associated with the Job into the
 
-             <see cref="F:Quartz.TriggerState.Error"/> state, which will require human
 
-             intervention (e.g. an application restart after fixing whatever
 
-             configuration problem led to the issue with instantiating the Job.
 
-             </para>
 
-             </remarks>
 
-             <param name="bundle">The TriggerFiredBundle from which the <see cref="T:Quartz.IJobDetail"/>
 
-               and other info relating to the trigger firing can be obtained.</param>
 
-             <param name="scheduler"></param>
 
-             <returns>the newly instantiated Job</returns>
 
-             <throws>  SchedulerException if there is a problem instantiating the Job. </throws>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.PropertySettingJobFactory.SetObjectProperties(System.Object,Quartz.JobDataMap)">
 
-             <summary>
 
-             Sets the object properties.
 
-             </summary>
 
-             <param name="obj">The object to set properties to.</param>
 
-             <param name="data">The data to set.</param>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.PropertySettingJobFactory.ThrowIfPropertyNotFound">
 
-             <summary> 
 
-             Whether the JobInstantiation should fail and throw and exception if
 
-             a key (name) and value (type) found in the JobDataMap does not 
 
-             correspond to a property setter on the Job class.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.PropertySettingJobFactory.WarnIfPropertyNotFound">
 
-             <summary> 
 
-             Get or set whether a warning should be logged if
 
-             a key (name) and value (type) found in the JobDataMap does not 
 
-             correspond to a property setter on the Job class.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.RAMJobStore">
 
-             <summary>
 
-             This class implements a <see cref="T:Quartz.Spi.IJobStore"/> that
 
-             utilizes RAM as its storage device.
 
-             <para>
 
-             As you should know, the ramification of this is that access is extremely
 
-             fast, but the data is completely volatile - therefore this <see cref="T:Quartz.Spi.IJobStore"/>
 
-             should not be used if true persistence between program shutdowns is
 
-             required.
 
-             </para>
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Sharada Jambula</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Simpl.RAMJobStore"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetFiredTriggerRecordId">
 
-             <summary>
 
-             Gets the fired trigger record id.
 
-             </summary>
 
-             <returns>The fired trigger record id.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.Initialize(Quartz.Spi.ITypeLoadHelper,Quartz.Spi.ISchedulerSignaler)">
 
-             <summary>
 
-             Called by the QuartzScheduler before the <see cref="T:Quartz.Spi.IJobStore"/> is
 
-             used, in order to give the it a chance to Initialize.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.SchedulerStarted">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the <see cref="T:Quartz.Spi.IJobStore"/> that
 
-             the scheduler has started.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.SchedulerPaused">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the JobStore that
 
-             the scheduler has been paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.SchedulerResumed">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the JobStore that
 
-             the scheduler has resumed after being paused.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.Shutdown">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the <see cref="T:Quartz.Spi.IJobStore"/> that
 
-             it should free up all of it's resources because the scheduler is
 
-             shutting down.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.ClearAllSchedulingData">
 
-             <summary>
 
-             Clears (deletes!) all scheduling data - all <see cref="T:Quartz.IJob"/>s, <see cref="T:Quartz.ITrigger"/>s
 
-             <see cref="T:Quartz.ICalendar"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.StoreJobAndTrigger(Quartz.IJobDetail,Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.IJobDetail"/> and <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <param name="newJob">The <see cref="T:Quartz.IJobDetail"/> to be stored.</param>
 
-             <param name="newTrigger">The <see cref="T:Quartz.ITrigger"/> to be stored.</param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.IsJobGroupPaused(System.String)">
 
-             <summary>
 
-             Returns true if the given job group is paused.
 
-             </summary>
 
-             <param name="groupName">Job group name</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.IsTriggerGroupPaused(System.String)">
 
-             <summary>
 
-             returns true if the given TriggerGroup is paused.
 
-             </summary>
 
-             <param name="groupName"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.StoreJob(Quartz.IJobDetail,System.Boolean)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-             <param name="newJob">The <see cref="T:Quartz.IJob"/> to be stored.</param>
 
-             <param name="replaceExisting">If <see langword="true"/>, any <see cref="T:Quartz.IJob"/> existing in the
 
-             <see cref="T:Quartz.Spi.IJobStore"/> with the same name and group should be
 
-             over-written.</param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.RemoveJob(Quartz.JobKey)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.IJob"/> with the given
 
-             name, and any <see cref="T:Quartz.ITrigger"/> s that reference
 
-             it.
 
-             </summary>
 
-             <returns>
 
-             	<see langword="true"/> if a <see cref="T:Quartz.IJob"/> with the given name and
 
-             group was found and removed from the store.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.RemoveTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.ITrigger"/> with the
 
-             given name.
 
-             </summary>
 
-             <returns>
 
-             	<see langword="true"/> if a <see cref="T:Quartz.ITrigger"/> with the given
 
-             name and group was found and removed from the store.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.StoreTrigger(Quartz.Spi.IOperableTrigger,System.Boolean)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <param name="newTrigger">The <see cref="T:Quartz.ITrigger"/> to be stored.</param>
 
-             <param name="replaceExisting">If <see langword="true"/>, any <see cref="T:Quartz.ITrigger"/> existing in
 
-             the <see cref="T:Quartz.Spi.IJobStore"/> with the same name and group should
 
-             be over-written.</param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.RemoveTrigger(Quartz.TriggerKey,System.Boolean)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.ITrigger"/> with the
 
-             given name.
 
-             
 
-             </summary>
 
-             <returns>
 
-             	<see langword="true"/> if a <see cref="T:Quartz.ITrigger"/> with the given
 
-             name and group was found and removed from the store.
 
-             </returns>
 
-             <param name="key">The <see cref="T:Quartz.ITrigger"/> to be removed.</param>
 
-             <param name="removeOrphanedJob">Whether to delete orphaned job details from scheduler if job becomes orphaned from removing the trigger.</param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.ReplaceTrigger(Quartz.TriggerKey,Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Replaces the trigger.
 
-             </summary>
 
-             <param name="triggerKey">The <see cref="T:Quartz.TriggerKey"/> of the <see cref="T:Quartz.ITrigger"/> to be replaced.</param>
 
-             <param name="newTrigger">The new trigger.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.RetrieveJob(Quartz.JobKey)">
 
-             <summary>
 
-             Retrieve the <see cref="T:Quartz.IJobDetail"/> for the given
 
-             <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-             <returns>
 
-             The desired <see cref="T:Quartz.IJob"/>, or null if there is no match.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.RetrieveTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Retrieve the given <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <returns>
 
-             The desired <see cref="T:Quartz.ITrigger"/>, or null if there is no match.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.CalendarExists(System.String)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.ICalendar"/> with the given identifier already
 
-             exists within the scheduler.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="calName">the identifier to check for</param>
 
-             <returns>true if a calendar exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.CheckExists(Quartz.JobKey)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.IJob"/> with the given identifier already 
 
-             exists within the scheduler.
 
-             </summary>
 
-             <param name="jobKey">the identifier to check for</param>
 
-             <returns>true if a Job exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.CheckExists(Quartz.TriggerKey)">
 
-             <summary>
 
-             Determine whether a <see cref="T:Quartz.ITrigger"/> with the given identifier already 
 
-             exists within the scheduler.
 
-             </summary>
 
-             <param name="triggerKey">triggerKey the identifier to check for</param>
 
-             <returns>true if a Trigger exists with the given identifier</returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetTriggerState(Quartz.TriggerKey)">
 
-             <summary>
 
-             Get the current state of the identified <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <seealso cref="F:Quartz.TriggerState.Normal"/>
 
-             <seealso cref="F:Quartz.TriggerState.Paused"/>
 
-             <seealso cref="F:Quartz.TriggerState.Complete"/>
 
-             <seealso cref="F:Quartz.TriggerState.Error"/>
 
-             <seealso cref="F:Quartz.TriggerState.Blocked"/>
 
-             <seealso cref="F:Quartz.TriggerState.None"/>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.StoreCalendar(System.String,Quartz.ICalendar,System.Boolean,System.Boolean)">
 
-             <summary>
 
-             Store the given <see cref="T:Quartz.ICalendar"/>.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="calendar">The <see cref="T:Quartz.ICalendar"/> to be stored.</param>
 
-             <param name="replaceExisting">If <see langword="true"/>, any <see cref="T:Quartz.ICalendar"/> existing
 
-             in the <see cref="T:Quartz.Spi.IJobStore"/> with the same name and group
 
-             should be over-written.</param>
 
-             <param name="updateTriggers">If <see langword="true"/>, any <see cref="T:Quartz.ITrigger"/>s existing
 
-             in the <see cref="T:Quartz.Spi.IJobStore"/> that reference an existing
 
-             Calendar with the same name with have their next fire time
 
-             re-computed with the new <see cref="T:Quartz.ICalendar"/>.</param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.RemoveCalendar(System.String)">
 
-             <summary>
 
-             Remove (delete) the <see cref="T:Quartz.ICalendar"/> with the
 
-             given name.
 
-             <para>
 
-             If removal of the <see cref="T:Quartz.ICalendar"/> would result in
 
-             <see cref="T:Quartz.ITrigger"/>s pointing to non-existent calendars, then a
 
-             <see cref="T:Quartz.JobPersistenceException"/> will be thrown.</para>
 
-             </summary>
 
-             <param name="calName">The name of the <see cref="T:Quartz.ICalendar"/> to be removed.</param>
 
-             <returns>
 
-             	<see langword="true"/> if a <see cref="T:Quartz.ICalendar"/> with the given name
 
-             was found and removed from the store.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.RetrieveCalendar(System.String)">
 
-             <summary>
 
-             Retrieve the given <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <param name="calName">The name of the <see cref="T:Quartz.ICalendar"/> to be retrieved.</param>
 
-             <returns>
 
-             The desired <see cref="T:Quartz.ICalendar"/>, or null if there is no match.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetNumberOfJobs">
 
-             <summary>
 
-             Get the number of <see cref="T:Quartz.IJobDetail"/> s that are
 
-             stored in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetNumberOfTriggers">
 
-             <summary>
 
-             Get the number of <see cref="T:Quartz.ITrigger"/> s that are
 
-             stored in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetNumberOfCalendars">
 
-             <summary>
 
-             Get the number of <see cref="T:Quartz.ICalendar"/> s that are
 
-             stored in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetJobKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.IJob"/> s that
 
-             match the given group matcher.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetCalendarNames">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.ICalendar"/> s
 
-             in the <see cref="T:Quartz.Spi.IJobStore"/>.
 
-             <para>
 
-             If there are no ICalendars in the given group name, the result should be
 
-             a zero-length array (not <see langword="null"/>).
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetTriggerKeys(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.ITrigger"/> s
 
-             that have the given group name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetJobGroupNames">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.IJob"/>
 
-             groups.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetTriggerGroupNames">
 
-             <summary>
 
-             Get the names of all of the <see cref="T:Quartz.ITrigger"/> groups.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetTriggersForJob(Quartz.JobKey)">
 
-             <summary>
 
-             Get all of the Triggers that are associated to the given Job.
 
-             <para>
 
-             If there are no matches, a zero-length array should be returned.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetTriggerWrappersForJob(Quartz.JobKey)">
 
-             <summary>
 
-             Gets the trigger wrappers for job.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetTriggerWrappersForCalendar(System.String)">
 
-             <summary>
 
-             Gets the trigger wrappers for calendar.
 
-             </summary>
 
-             <param name="calName">Name of the cal.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.PauseTrigger(Quartz.TriggerKey)">
 
-             <summary> 
 
-             Pause the <see cref="T:Quartz.ITrigger"/> with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.ITrigger"/>s in the given group.
 
-             <para>
 
-             The JobStore should "remember" that the group is paused, and impose the
 
-             pause on any new triggers that are added to the group while the group is
 
-             paused.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.PauseJob(Quartz.JobKey)">
 
-             <summary> 
 
-             Pause the <see cref="T:Quartz.IJobDetail"/> with the given
 
-             name - by pausing all of its current <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.PauseJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Pause all of the <see cref="T:Quartz.IJobDetail"/>s in the
 
-             given group - by pausing all of their <see cref="T:Quartz.ITrigger"/>s.
 
-             <para>
 
-             The JobStore should "remember" that the group is paused, and impose the
 
-             pause on any new jobs that are added to the group while the group is
 
-             paused.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.ResumeTrigger(Quartz.TriggerKey)">
 
-             <summary>
 
-             Resume (un-pause) the <see cref="T:Quartz.ITrigger"/> with the given key.
 
-             </summary>
 
-             <remarks>
 
-             If the <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})">
 
-             <summary>
 
-             Resume (un-pause) all of the <see cref="T:Quartz.ITrigger"/>s in the
 
-             given group.
 
-             <para>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.ResumeJob(Quartz.JobKey)">
 
-             <summary>
 
-             Resume (un-pause) the <see cref="T:Quartz.IJobDetail"/> with
 
-             the given name.
 
-             <para>
 
-             If any of the <see cref="T:Quartz.IJob"/>'s<see cref="T:Quartz.ITrigger"/> s missed one
 
-             or more fire-times, then the <see cref="T:Quartz.ITrigger"/>'s misfire
 
-             instruction will be applied.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.ResumeJobs(Quartz.Impl.Matchers.GroupMatcher{Quartz.JobKey})">
 
-             <summary>
 
-             Resume (un-pause) all of the <see cref="T:Quartz.IJobDetail"/>s
 
-             in the given group.
 
-             <para>
 
-             If any of the <see cref="T:Quartz.IJob"/> s had <see cref="T:Quartz.ITrigger"/> s that
 
-             missed one or more fire-times, then the <see cref="T:Quartz.ITrigger"/>'s
 
-             misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.PauseAll">
 
-             <summary>
 
-             Pause all triggers - equivalent of calling <see cref="M:Quartz.Simpl.RAMJobStore.PauseTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             on every group.
 
-             <para>
 
-             When <see cref="M:Quartz.Simpl.RAMJobStore.ResumeAll"/> is called (to un-pause), trigger misfire
 
-             instructions WILL be applied.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="M:Quartz.Simpl.RAMJobStore.ResumeAll"/> 
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.ResumeAll">
 
-             <summary>
 
-             Resume (un-pause) all triggers - equivalent of calling <see cref="M:Quartz.Simpl.RAMJobStore.ResumeTriggers(Quartz.Impl.Matchers.GroupMatcher{Quartz.TriggerKey})"/>
 
-             on every trigger group and setting all job groups unpaused />.
 
-             <para>
 
-             If any <see cref="T:Quartz.ITrigger"/> missed one or more fire-times, then the
 
-             <see cref="T:Quartz.ITrigger"/>'s misfire instruction will be applied.
 
-             </para>
 
-             </summary>
 
-             <seealso cref="M:Quartz.Simpl.RAMJobStore.PauseAll"/>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.ApplyMisfire(Quartz.Simpl.TriggerWrapper)">
 
-             <summary>
 
-             Applies the misfire.
 
-             </summary>
 
-             <param name="tw">The trigger wrapper.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.AcquireNextTriggers(System.DateTimeOffset,System.Int32,System.TimeSpan)">
 
-             <summary>
 
-             Get a handle to the next trigger to be fired, and mark it as 'reserved'
 
-             by the calling scheduler.
 
-             </summary>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.ReleaseAcquiredTrigger(Quartz.Spi.IOperableTrigger)">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> that the scheduler no longer plans to
 
-             fire the given <see cref="T:Quartz.ITrigger"/>, that it had previously acquired
 
-             (reserved).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.TriggersFired(System.Collections.Generic.IList{Quartz.Spi.IOperableTrigger})">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> that the scheduler is now firing the
 
-             given <see cref="T:Quartz.ITrigger"/> (executing its associated <see cref="T:Quartz.IJob"/>),
 
-             that it had previously acquired (reserved).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.TriggeredJobComplete(Quartz.Spi.IOperableTrigger,Quartz.IJobDetail,Quartz.SchedulerInstruction)">
 
-             <summary> 
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> that the scheduler has completed the
 
-             firing of the given <see cref="T:Quartz.ITrigger"/> (and the execution its
 
-             associated <see cref="T:Quartz.IJob"/>), and that the <see cref="T:Quartz.JobDataMap"/>
 
-             in the given <see cref="T:Quartz.IJobDetail"/> should be updated if the <see cref="T:Quartz.IJob"/>
 
-             is stateful.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.SetAllTriggersOfJobToState(Quartz.JobKey,Quartz.Simpl.InternalTriggerState)">
 
-             <summary>
 
-             Sets the state of all triggers of job to specified state.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.PeekTriggers">
 
-             <summary>
 
-             Peeks the triggers.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RAMJobStore.GetPausedTriggerGroups">
 
-             <seealso cref="M:Quartz.Spi.IJobStore.GetPausedTriggerGroups"/>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RAMJobStore.MisfireThreshold">
 
-             <summary> 
 
-             The time span by which a trigger must have missed its
 
-             next-fire-time, in order for it to be considered "misfired" and thus
 
-             have its misfire instruction applied.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RAMJobStore.SupportsPersistence">
 
-             <summary>
 
-             Returns whether this instance supports persistence.
 
-             </summary>
 
-             <value></value>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RAMJobStore.InstanceId">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> of the Scheduler instance's Id, 
 
-             prior to initialize being invoked.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RAMJobStore.InstanceName">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IJobStore"/> of the Scheduler instance's name, 
 
-             prior to initialize being invoked.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.TriggerWrapperComparator">
 
-             <summary>
 
-             Comparer for trigger wrappers.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.TriggerWrapperComparator.Equals(Quartz.Simpl.TriggerWrapperComparator)">
 
-             <summary>
 
-             Indicates whether the current object is equal to another object of the same type.
 
-             </summary>
 
-             <returns>
 
-             true if the current object is equal to the <paramref name="other"/> parameter; otherwise, false.
 
-             </returns>
 
-             <param name="other">An object to compare with this object.</param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.TriggerWrapperComparator.GetHashCode">
 
-             <summary>
 
-             Serves as a hash function for a particular type. 
 
-             </summary>
 
-             <returns>
 
-             A hash code for the current <see cref="T:System.Object"/>.
 
-             </returns>
 
-             <filterpriority>2</filterpriority>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.InternalTriggerState">
 
-             <summary>
 
-             Possible internal trigger states 
 
-             in RAMJobStore
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.InternalTriggerState.Waiting">
 
-             <summary>
 
-             Waiting 
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.InternalTriggerState.Acquired">
 
-             <summary>
 
-             Acquired
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.InternalTriggerState.Executing">
 
-             <summary>
 
-             Executing
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.InternalTriggerState.Complete">
 
-             <summary>
 
-             Complete
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.InternalTriggerState.Paused">
 
-             <summary>
 
-             Paused
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.InternalTriggerState.Blocked">
 
-             <summary>
 
-             Blocked
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.InternalTriggerState.PausedAndBlocked">
 
-             <summary>
 
-             Paused and Blocked
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.InternalTriggerState.Error">
 
-             <summary>
 
-             Error
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.TriggerWrapper">
 
-             <summary>
 
-             Helper wrapper class
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.TriggerWrapper.key">
 
-             <summary>
 
-             The key used
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.TriggerWrapper.jobKey">
 
-             <summary>
 
-             Job's key
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.TriggerWrapper.trigger">
 
-             <summary>
 
-             The trigger
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.TriggerWrapper.state">
 
-             <summary>
 
-             Current state
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.TriggerWrapper.Equals(System.Object)">
 
-             <summary>
 
-             Determines whether the specified <see cref="T:System.Object"></see> is equal to the current <see cref="T:System.Object"></see>.
 
-             </summary>
 
-             <param name="obj">The <see cref="T:System.Object"></see> to compare with the current <see cref="T:System.Object"></see>.</param>
 
-             <returns>
 
-             true if the specified <see cref="T:System.Object"></see> is equal to the current <see cref="T:System.Object"></see>; otherwise, false.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.TriggerWrapper.GetHashCode">
 
-             <summary>
 
-             Serves as a hash function for a particular type. <see cref="M:System.Object.GetHashCode"></see> is suitable for use in hashing algorithms and data structures like a hash table.
 
-             </summary>
 
-             <returns>
 
-             A hash code for the current <see cref="T:System.Object"></see>.
 
-             </returns>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.RemotingSchedulerExporter">
 
-             <summary>
 
-             Scheduler exporter that exports scheduler to remoting context.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="T:Quartz.Spi.ISchedulerExporter">
 
-             <summary>
 
-             Service interface for scheduler exporters.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ISchedulerExporter.Bind(Quartz.Simpl.IRemotableQuartzScheduler)">
 
-             <summary>
 
-             Binds (exports) scheduler to external context.
 
-             </summary>
 
-             <param name="scheduler"></param>
 
-         </member>
 
-         <member name="M:Quartz.Spi.ISchedulerExporter.UnBind(Quartz.Simpl.IRemotableQuartzScheduler)">
 
-             <summary>
 
-             Unbinds scheduler from external context.
 
-             </summary>
 
-             <param name="scheduler"></param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RemotingSchedulerExporter.RegisterRemotingChannelIfNeeded">
 
-             <summary>
 
-             Registers remoting channel if needed. This is determined
 
-             by checking whether there is a positive value for port.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RemotingSchedulerExporter.Port">
 
-             <summary>
 
-             Gets or sets the port used for remoting.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RemotingSchedulerExporter.BindName">
 
-             <summary>
 
-             Gets or sets the name to use when exporting
 
-             scheduler to remoting context.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RemotingSchedulerExporter.ChannelName">
 
-             <summary>
 
-             Gets or sets the name to use when binding to 
 
-             tcp channel.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RemotingSchedulerExporter.ChannelType">
 
-             <summary>
 
-             Sets the channel type when registering remoting.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RemotingSchedulerExporter.TypeFilterLevel">
 
-             <summary>
 
-             Sets the <see cref="P:Quartz.Simpl.RemotingSchedulerExporter.TypeFilterLevel"/> used when
 
-             exporting to remoting context. Defaults to
 
-             <see cref="F:System.Runtime.Serialization.Formatters.TypeFilterLevel.Full"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RemotingSchedulerExporter.RejectRemoteRequests">
 
-             <summary>
 
-             A Boolean value (true or false) that specifies whether to refuse requests from other computers. 
 
-             Specifying true allows only remoting calls from the local computer. The default is false.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.RemotingSchedulerProxyFactory">
 
-             <summary>
 
-             A <see cref="T:Quartz.Spi.IRemotableSchedulerProxyFactory"/> implementation that creates
 
-             connection to remote scheduler using remoting.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Spi.IRemotableSchedulerProxyFactory">
 
-             <summary>
 
-             Client Proxy to a IRemotableQuartzScheduler
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IRemotableSchedulerProxyFactory.GetProxy">
 
-             <summary>
 
-             Returns a client proxy to a remote <see cref="T:Quartz.Simpl.IRemotableQuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.RemotingSchedulerProxyFactory.GetProxy">
 
-             <summary>
 
-             Returns a client proxy to a remote <see cref="T:Quartz.Simpl.IRemotableQuartzScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.RemotingSchedulerProxyFactory.Address">
 
-             <summary>
 
-             Gets or sets the remote scheduler address.
 
-             </summary>
 
-             <value>The remote scheduler address.</value>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.SimpleInstanceIdGenerator">
 
-             <summary> 
 
-             The default InstanceIdGenerator used by Quartz when instance id is to be
 
-             automatically generated.  Instance id is of the form HOSTNAME + CURRENT_TIME.
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-             <seealso cref="T:Quartz.Spi.IInstanceIdGenerator"/>
 
-             <seealso cref="T:Quartz.Simpl.HostnameInstanceIdGenerator"/>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleInstanceIdGenerator.GenerateInstanceId">
 
-             <summary>
 
-             Generate the instance id for a <see cref="T:Quartz.IScheduler"/>
 
-             </summary>
 
-             <returns>The clusterwide unique instance id.</returns>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.SimpleThreadPool">
 
-             <summary>
 
-             This is class is a simple implementation of a thread pool, based on the
 
-             <see cref="T:Quartz.Spi.IThreadPool"/> interface.
 
-             </summary>
 
-             <remarks>
 
-             <see cref="T:Quartz.IThreadRunnable"/> objects are sent to the pool with the <see cref="M:Quartz.Simpl.SimpleThreadPool.RunInThread(Quartz.IThreadRunnable)"/>
 
-             method, which blocks until a <see cref="T:System.Threading.Thread"/> becomes available.
 
-             
 
-             The pool has a fixed number of <see cref="T:System.Threading.Thread"/>s, and does not grow or
 
-             shrink based on demand.
 
-             </remarks>
 
-             <author>James House</author>
 
-             <author>Juergen Donnerstag</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Spi.IThreadPool">
 
-             <summary>
 
-             The interface to be implemented by classes that want to provide a thread
 
-             pool for the <see cref="T:Quartz.IScheduler"/>'s use.
 
-             </summary>
 
-             <remarks>
 
-             <see cref="T:Quartz.Spi.IThreadPool"/> implementation instances should ideally be made
 
-             for the sole use of Quartz.  Most importantly, when the method
 
-              <see cref="M:Quartz.Spi.IThreadPool.BlockForAvailableThreads"/> returns a value of 1 or greater,
 
-             there must still be at least one available thread in the pool when the
 
-             method  <see cref="M:Quartz.Spi.IThreadPool.RunInThread(Quartz.IThreadRunnable)"/> is called a few moments (or
 
-             many moments) later.  If this assumption does not hold true, it may
 
-             result in extra JobStore queries and updates, and if clustering features
 
-             are being used, it may result in greater imbalance of load.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.Core.QuartzScheduler"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IThreadPool.RunInThread(Quartz.IThreadRunnable)">
 
-             <summary>
 
-             Execute the given <see cref="T:Quartz.IThreadRunnable"/> in the next
 
-             available <see cref="T:System.Threading.Thread"/>.
 
-             </summary>
 
-             <remarks>
 
-             The implementation of this interface should not throw exceptions unless
 
-             there is a serious problem (i.e. a serious misconfiguration). If there
 
-             are no available threads, rather it should either queue the Runnable, or
 
-             block until a thread is available, depending on the desired strategy.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IThreadPool.BlockForAvailableThreads">
 
-              <summary>
 
-              Determines the number of threads that are currently available in in
 
-              the pool.  Useful for determining the number of times
 
-              <see cref="M:Quartz.Spi.IThreadPool.RunInThread(Quartz.IThreadRunnable)"/>  can be called before returning
 
-              false.
 
-              </summary>
 
-             <remarks>
 
-              The implementation of this method should block until there is at
 
-              least one available thread.
 
-             </remarks>
 
-              <returns>the number of currently available threads</returns>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IThreadPool.Initialize">
 
-             <summary>
 
-             Must be called before the <see cref="T:System.Threading.ThreadPool"/> is
 
-             used, in order to give the it a chance to Initialize.
 
-             </summary>
 
-             <remarks>
 
-             Typically called by the <see cref="T:Quartz.ISchedulerFactory"/>.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Spi.IThreadPool.Shutdown(System.Boolean)">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the <see cref="T:System.Threading.ThreadPool"/>
 
-             that it should free up all of it's resources because the scheduler is
 
-             shutting down.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IThreadPool.PoolSize">
 
-             <summary>
 
-             Get the current number of threads in the <see cref="T:Quartz.Spi.IThreadPool"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IThreadPool.InstanceId">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IThreadPool"/> of the Scheduler instance's Id, 
 
-             prior to initialize being invoked.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.IThreadPool.InstanceName">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IThreadPool"/> of the Scheduler instance's name, 
 
-             prior to initialize being invoked.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.#ctor">
 
-             <summary> 
 
-             Create a new (unconfigured) <see cref="T:Quartz.Simpl.SimpleThreadPool"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.#ctor(System.Int32,System.Threading.ThreadPriority)">
 
-             <summary>
 
-             Create a new <see cref="T:Quartz.Simpl.SimpleThreadPool"/> with the specified number
 
-             of <see cref="T:System.Threading.Thread"/> s that have the given priority.
 
-             </summary>
 
-             <param name="threadCount">
 
-             the number of worker <see cref="T:System.Threading.Thread"/>s in the pool, must
 
-             be > 0.
 
-             </param>
 
-             <param name="threadPriority">
 
-             the thread priority for the worker threads.
 
-             
 
-             </param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.Initialize">
 
-             <summary>
 
-             Called by the QuartzScheduler before the <see cref="T:System.Threading.ThreadPool"/> is
 
-             used, in order to give the it a chance to Initialize.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.Shutdown(System.Boolean)">
 
-             <summary>
 
-             Terminate any worker threads in this thread group.
 
-             Jobs currently in progress will complete.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.RunInThread(Quartz.IThreadRunnable)">
 
-             <summary>
 
-             Run the given <see cref="T:Quartz.IThreadRunnable"/> object in the next available
 
-             <see cref="T:System.Threading.Thread"/>. If while waiting the thread pool is asked to
 
-             shut down, the Runnable is executed immediately within a new additional
 
-             thread.
 
-             </summary>
 
-             <param name="runnable">The <see cref="T:Quartz.IThreadRunnable"/> to be added.</param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.CreateWorkerThreads(System.Int32)">
 
-             <summary>
 
-             Creates the worker threads.
 
-             </summary>
 
-             <param name="threadCount">The thread count.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.Shutdown">
 
-             <summary>
 
-             Terminate any worker threads in this thread group.
 
-             Jobs currently in progress will complete.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.SimpleThreadPool.ThreadCount">
 
-             <summary>
 
-             Gets or sets the number of worker threads in the pool.
 
-             Set  has no effect after <see cref="M:Quartz.Simpl.SimpleThreadPool.Initialize"/> has been called.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.SimpleThreadPool.ThreadPriority">
 
-             <summary>
 
-             Get or set the thread priority of worker threads in the pool.
 
-             Set operation has no effect after <see cref="M:Quartz.Simpl.SimpleThreadPool.Initialize"/> has been called.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.SimpleThreadPool.ThreadNamePrefix">
 
-             <summary>
 
-             Gets or sets the thread name prefix.
 
-             </summary>
 
-             <value>The thread name prefix.</value>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.SimpleThreadPool.MakeThreadsDaemons">
 
-             <summary> 
 
-             Gets or sets the value of makeThreadsDaemons.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.SimpleThreadPool.PoolSize">
 
-             <summary>
 
-             Gets the size of the pool.
 
-             </summary>
 
-             <value>The size of the pool.</value>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.SimpleThreadPool.InstanceId">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IThreadPool"/> of the Scheduler instance's Id, 
 
-             prior to initialize being invoked.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.SimpleThreadPool.InstanceName">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IThreadPool"/> of the Scheduler instance's name, 
 
-             prior to initialize being invoked.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.SimpleThreadPool.WorkerThread">
 
-             <summary>
 
-             A Worker loops, waiting to Execute tasks.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.WorkerThread.#ctor(Quartz.Simpl.SimpleThreadPool,System.String,System.Threading.ThreadPriority,System.Boolean)">
 
-             <summary>
 
-             Create a worker thread and start it. Waiting for the next Runnable,
 
-             executing it, and waiting for the next Runnable, until the Shutdown
 
-             flag is set.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.WorkerThread.#ctor(Quartz.Simpl.SimpleThreadPool,System.String,System.Threading.ThreadPriority,System.Boolean,Quartz.IThreadRunnable)">
 
-             <summary>
 
-             Create a worker thread, start it, Execute the runnable and terminate
 
-             the thread (one time execution).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.WorkerThread.Shutdown">
 
-             <summary>
 
-             Signal the thread that it should terminate.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleThreadPool.WorkerThread.Run">
 
-             <summary>
 
-             Loop, executing targets as they are received.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.SimpleTypeLoadHelper">
 
-             <summary> 
 
-             A <see cref="T:Quartz.Spi.ITypeLoadHelper"/> that simply calls <see cref="M:System.Type.GetType(System.String)"/>.
 
-             </summary>
 
-             <seealso cref="T:Quartz.Spi.ITypeLoadHelper"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleTypeLoadHelper.Initialize">
 
-             <summary> 
 
-             Called to give the ClassLoadHelper a chance to Initialize itself,
 
-             including the opportunity to "steal" the class loader off of the calling
 
-             thread, which is the thread that is initializing Quartz.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleTypeLoadHelper.LoadType(System.String)">
 
-             <summary> Return the class with the given name.</summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleTypeLoadHelper.GetResource(System.String)">
 
-             <summary>
 
-             Finds a resource with a given name. This method returns null if no
 
-             resource with this name is found.
 
-             </summary>
 
-             <param name="name">name of the desired resource
 
-             </param>
 
-             <returns> a Uri object</returns>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SimpleTypeLoadHelper.GetResourceAsStream(System.String)">
 
-             <summary>
 
-             Finds a resource with a given name. This method returns null if no
 
-             resource with this name is found.
 
-             </summary>
 
-             <param name="name">name of the desired resource
 
-             </param>
 
-             <returns> a Stream object
 
-             </returns>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.SystemPropertyInstanceIdGenerator">
 
-             <summary>
 
-             InstanceIdGenerator that will use a <see cref="F:Quartz.Simpl.SystemPropertyInstanceIdGenerator.SystemProperty"/> to configure the scheduler.
 
-             If no value set for the property, a <see cref="T:Quartz.SchedulerException"/> is thrown.
 
-             <author>Alex Snaps</author>
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.Simpl.SystemPropertyInstanceIdGenerator.SystemProperty">
 
-             <summary>
 
-             System property to read the instanceId from.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.SystemPropertyInstanceIdGenerator.GenerateInstanceId">
 
-             <summary>
 
-             Returns the cluster wide value for this scheduler instance's id, based on a system property.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.SystemPropertyInstanceIdGenerator.Prepend">
 
-             <summary>
 
-             A string of text to prepend (add to the beginning) to the instanceId found in the system property.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.SystemPropertyInstanceIdGenerator.Postpend">
 
-             <summary>
 
-             A string of text to postpend (add to the end) to the instanceId found in the system property.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.SystemPropertyInstanceIdGenerator.SystemPropertyName">
 
-             <summary>
 
-             The name of the system property from which to obtain the instanceId.
 
-             </summary>
 
-             <remarks>
 
-             Defaults to <see cref="F:Quartz.Simpl.SystemPropertyInstanceIdGenerator.SystemProperty"/>.
 
-             </remarks>
 
-         </member>
 
-         <member name="T:Quartz.Simpl.ZeroSizeThreadPool">
 
-             <summary>
 
-             This is class is a simple implementation of a zero size thread pool, based on the
 
-             <see cref="T:Quartz.Spi.IThreadPool"/> interface.
 
-             </summary>
 
-             <remarks>
 
-             The pool has zero <see cref="T:System.Threading.Thread"/>s and does not grow or shrink based on demand.
 
-             Which means it is obviously not useful for most scenarios.  When it may be useful
 
-             is to prevent creating any worker threads at all - which may be desirable for
 
-             the sole purpose of preserving system resources in the case where the scheduler
 
-             instance only exists in order to schedule jobs, but which will never execute
 
-             jobs (e.g. will never have Start() called on it).
 
-             </remarks>
 
-             <author>Wayne Fay</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.ZeroSizeThreadPool.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Simpl.ZeroSizeThreadPool"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.ZeroSizeThreadPool.Initialize">
 
-             <summary>
 
-             Called by the QuartzScheduler before the <see cref="T:System.Threading.ThreadPool"/> is
 
-             used, in order to give the it a chance to Initialize.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.ZeroSizeThreadPool.Shutdown">
 
-             <summary>
 
-             Shutdowns this instance.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.ZeroSizeThreadPool.Shutdown(System.Boolean)">
 
-             <summary>
 
-             Called by the QuartzScheduler to inform the <see cref="T:System.Threading.ThreadPool"/>
 
-             that it should free up all of it's resources because the scheduler is
 
-             shutting down.
 
-             </summary>
 
-             <param name="waitForJobsToComplete"></param>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.ZeroSizeThreadPool.RunInThread(Quartz.IThreadRunnable)">
 
-             <summary>
 
-             Execute the given <see cref="T:Quartz.IThreadRunnable"/> in the next
 
-             available <see cref="T:System.Threading.Thread"/>.
 
-             </summary>
 
-             <param name="runnable"></param>
 
-             <returns></returns>
 
-             <remarks>
 
-             The implementation of this interface should not throw exceptions unless
 
-             there is a serious problem (i.e. a serious misconfiguration). If there
 
-             are no available threads, rather it should either queue the Runnable, or
 
-             block until a thread is available, depending on the desired strategy.
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.Simpl.ZeroSizeThreadPool.BlockForAvailableThreads">
 
-             <summary>
 
-             Determines the number of threads that are currently available in in
 
-             the pool.  Useful for determining the number of times
 
-             <see cref="M:Quartz.Simpl.ZeroSizeThreadPool.RunInThread(Quartz.IThreadRunnable)"/>  can be called before returning
 
-             false.
 
-             </summary>
 
-             <returns>
 
-             the number of currently available threads
 
-             </returns>
 
-             <remarks>
 
-             The implementation of this method should block until there is at
 
-             least one available thread.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.ZeroSizeThreadPool.Log">
 
-             <summary>
 
-             Gets the log.
 
-             </summary>
 
-             <value>The log.</value>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.ZeroSizeThreadPool.PoolSize">
 
-             <summary>
 
-             Gets the size of the pool.
 
-             </summary>
 
-             <value>The size of the pool.</value>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.ZeroSizeThreadPool.InstanceId">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IThreadPool"/> of the Scheduler instance's Id, 
 
-             prior to initialize being invoked.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Simpl.ZeroSizeThreadPool.InstanceName">
 
-             <summary>
 
-             Inform the <see cref="T:Quartz.Spi.IThreadPool"/> of the Scheduler instance's name, 
 
-             prior to initialize being invoked.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Spi.TriggerFiredBundle">
 
-             <summary>
 
-             A simple class (structure) used for returning execution-time data from the
 
-             JobStore to the <see cref="T:Quartz.Core.QuartzSchedulerThread"/>.
 
-             </summary>
 
-             <seealso cref="T:Quartz.Core.QuartzScheduler"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Spi.TriggerFiredBundle.#ctor(Quartz.IJobDetail,Quartz.Spi.IOperableTrigger,Quartz.ICalendar,System.Boolean,System.Nullable{System.DateTimeOffset},System.Nullable{System.DateTimeOffset},System.Nullable{System.DateTimeOffset},System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Spi.TriggerFiredBundle"/> class.
 
-             </summary>
 
-             <param name="job">The job.</param>
 
-             <param name="trigger">The trigger.</param>
 
-             <param name="cal">The calendar.</param>
 
-             <param name="jobIsRecovering">if set to <c>true</c> [job is recovering].</param>
 
-             <param name="fireTimeUtc">The fire time.</param>
 
-             <param name="scheduledFireTimeUtc">The scheduled fire time.</param>
 
-             <param name="prevFireTimeUtc">The previous fire time.</param>
 
-             <param name="nextFireTimeUtc">The next fire time.</param>
 
-         </member>
 
-         <member name="P:Quartz.Spi.TriggerFiredBundle.JobDetail">
 
-             <summary>
 
-             Gets the job detail.
 
-             </summary>
 
-             <value>The job detail.</value>
 
-         </member>
 
-         <member name="P:Quartz.Spi.TriggerFiredBundle.Trigger">
 
-             <summary>
 
-             Gets the trigger.
 
-             </summary>
 
-             <value>The trigger.</value>
 
-         </member>
 
-         <member name="P:Quartz.Spi.TriggerFiredBundle.Calendar">
 
-             <summary>
 
-             Gets the calendar.
 
-             </summary>
 
-             <value>The calendar.</value>
 
-         </member>
 
-         <member name="P:Quartz.Spi.TriggerFiredBundle.Recovering">
 
-             <summary>
 
-             Gets a value indicating whether this <see cref="T:Quartz.Spi.TriggerFiredBundle"/> is recovering.
 
-             </summary>
 
-             <value><c>true</c> if recovering; otherwise, <c>false</c>.</value>
 
-         </member>
 
-         <member name="P:Quartz.Spi.TriggerFiredBundle.FireTimeUtc">
 
-             <returns> 
 
-             Returns the UTC fire time.
 
-             </returns>
 
-         </member>
 
-         <member name="P:Quartz.Spi.TriggerFiredBundle.NextFireTimeUtc">
 
-             <summary>
 
-             Gets the next UTC fire time.
 
-             </summary>
 
-             <value>The next fire time.</value>
 
-             <returns> Returns the nextFireTimeUtc.</returns>
 
-         </member>
 
-         <member name="P:Quartz.Spi.TriggerFiredBundle.PrevFireTimeUtc">
 
-             <summary>
 
-             Gets the previous UTC fire time.
 
-             </summary>
 
-             <value>The previous fire time.</value>
 
-             <returns> Returns the previous fire time. </returns>
 
-         </member>
 
-         <member name="P:Quartz.Spi.TriggerFiredBundle.ScheduledFireTimeUtc">
 
-             <returns> 
 
-             Returns the scheduled UTC fire time.
 
-             </returns>
 
-         </member>
 
-         <member name="T:Quartz.Spi.TriggerFiredResult">
 
-             <summary>
 
-             Result holder for trigger firing event.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Spi.TriggerFiredResult.#ctor(Quartz.Spi.TriggerFiredBundle)">
 
-             <summary>
 
-              Constructor.
 
-             </summary>
 
-             <param name="triggerFiredBundle"></param>
 
-         </member>
 
-         <member name="M:Quartz.Spi.TriggerFiredResult.#ctor(System.Exception)">
 
-             <summary>
 
-              Constructor.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.TriggerFiredResult.TriggerFiredBundle">
 
-             <summary>
 
-              Bundle.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Spi.TriggerFiredResult.Exception">
 
-             <summary>
 
-             Possible exception.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Util.DictionaryExtensions">
 
-             <summary>
 
-             Extension methods for <see cref="T:System.Collections.Generic.IDictionary`2"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DictionaryExtensions.TryGetAndReturn``2(System.Collections.Generic.IDictionary{``0,``1},``0)">
 
-             <summary>
 
-             Tries to read value and returns the value if successfully read. Otherwise return default value
 
-             for value's type.
 
-             </summary>
 
-             <typeparam name="TKey"></typeparam>
 
-             <typeparam name="TValue"></typeparam>
 
-             <param name="dictionary"></param>
 
-             <param name="key"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Util.DataReaderExtensions">
 
-             <summary>
 
-             Extension methods for simplified <see cref="T:System.Data.IDataReader"/> access.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DataReaderExtensions.GetString(System.Data.IDataReader,System.String)">
 
-             <summary>
 
-             Returns string from given column name, or null if DbNull.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DataReaderExtensions.GetInt32(System.Data.IDataReader,System.String)">
 
-             <summary>
 
-             Returns int from given column name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DataReaderExtensions.GetInt64(System.Data.IDataReader,System.String)">
 
-             <summary>
 
-             Returns long from given column name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DataReaderExtensions.GetNullableInt64(System.Data.IDataReader,System.String)">
 
-             <summary>
 
-             Returns long from given column name, or null if DbNull.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DataReaderExtensions.GetDecimal(System.Data.IDataReader,System.String)">
 
-             <summary>
 
-             Returns decimal from given column name.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Util.DBConnectionManager">
 
-             <summary>
 
-             Manages a collection of IDbProviders, and provides transparent access
 
-             to their database.
 
-             </summary>
 
-             <seealso cref="T:Quartz.Impl.AdoJobStore.Common.IDbProvider"/>
 
-             <author>James House</author>
 
-             <author>Sharada Jambula</author>
 
-             <author>Mohammad Rezaei</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.Util.IDbConnectionManager">
 
-             <summary>
 
-             Manages a collection of IDbProviders, and provides transparent access
 
-             to their database.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.IDbConnectionManager.Shutdown(System.String)">
 
-             <summary> 
 
-             Shuts down database connections from the data source with the given name,
 
-             if applicable for the underlying provider.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.IDbConnectionManager.GetConnection(System.String)">
 
-             <summary>
 
-             Get a database connection from the data source with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.IDbConnectionManager.GetDbMetadata(System.String)">
 
-             <summary>
 
-             Returns meta data for data source with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.IDbConnectionManager.GetDbProvider(System.String)">
 
-             <summary>
 
-             Gets db provider for data source with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.IDbConnectionManager.AddConnectionProvider(System.String,Quartz.Impl.AdoJobStore.Common.IDbProvider)">
 
-             <summary>
 
-             Adds a connection provider to data source with the given name.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DBConnectionManager.#ctor">
 
-             <summary> 
 
-             Private constructor
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DBConnectionManager.AddConnectionProvider(System.String,Quartz.Impl.AdoJobStore.Common.IDbProvider)">
 
-             <summary>
 
-             Adds the connection provider.
 
-             </summary>
 
-             <param name="dataSourceName">Name of the data source.</param>
 
-             <param name="provider">The provider.</param>
 
-         </member>
 
-         <member name="M:Quartz.Util.DBConnectionManager.GetConnection(System.String)">
 
-             <summary>
 
-             Get a database connection from the DataSource with the given name.
 
-             </summary>
 
-             <returns> a database connection </returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.DBConnectionManager.Shutdown(System.String)">
 
-             <summary> 
 
-             Shuts down database connections from the DataSource with the given name,
 
-             if applicable for the underlying provider.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DBConnectionManager.GetDbProvider(System.String)">
 
-             <summary>
 
-             Gets the db provider.
 
-             </summary>
 
-             <param name="dsName">Name of the ds.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Util.DBConnectionManager.Instance">
 
-             <summary> 
 
-             Get the class instance.
 
-             </summary>
 
-             <returns> an instance of this class
 
-             </returns>
 
-         </member>
 
-         <member name="T:Quartz.Util.DirtyFlagMap`2">
 
-             <summary>
 
-             An implementation of <see cref="T:System.Collections.IDictionary"/> that wraps another <see cref="T:System.Collections.IDictionary"/>
 
-             and flags itself 'dirty' when it is modified.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.#ctor">
 
-             <summary>
 
-             Create a DirtyFlagMap that 'wraps' a <see cref="T:System.Collections.Hashtable"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.#ctor(System.Int32)">
 
-             <summary>
 
-             Create a DirtyFlagMap that 'wraps' a <see cref="T:System.Collections.Hashtable"/> that has the
 
-             given initial capacity.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.Clone">
 
-             <summary>
 
-             Creates a new object that is a copy of the current instance.
 
-             </summary>
 
-             <returns>
 
-             A new object that is a copy of this instance.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.Get(`0)">
 
-             <summary>
 
-             Gets the value behind the specified key.
 
-             </summary>
 
-             <param name="key">The key.</param>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.Clear">
 
-             <summary>
 
-             When implemented by a class, removes all elements from the <see cref="T:System.Collections.IDictionary"/>.
 
-             </summary>
 
-             <exception cref="T:System.NotSupportedException">
 
-             The <see cref="T:System.Collections.IDictionary"/> is read-only.
 
-             </exception>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.ContainsKey(`0)">
 
-             <summary>
 
-             When implemented by a class, determines whether the <see cref="T:System.Collections.IDictionary"/> contains an element with the specified key.
 
-             </summary>
 
-             <param name="key">The key to locate in the <see cref="T:System.Collections.IDictionary"/>.</param>
 
-             <returns>
 
-             	<see langword="true"/> if the <see cref="T:System.Collections.IDictionary"/> contains an element with the key; otherwise, <see langword="false"/>.
 
-             </returns>
 
-             <exception cref="T:System.ArgumentNullException">
 
-             	<paramref name="key "/>is <see langword="null"/>.</exception>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.Remove(`0)">
 
-             <summary>
 
-             When implemented by a class, removes the element with the
 
-             specified key from the <see cref="T:System.Collections.IDictionary"/>.
 
-             </summary>
 
-             <param name="key">The key of the element to remove.</param>
 
-             <exception cref="T:System.ArgumentNullException">
 
-             	<paramref name="key "/> is <see langword="null"/>.</exception>
 
-             <exception cref="T:System.NotSupportedException">
 
-             	<para>The <see cref="T:System.Collections.IDictionary"/> is read-only.</para>
 
-             	<para>-or-</para>
 
-             	<para>The <see cref="T:System.Collections.IDictionary"/> has a fixed size.</para>
 
-             </exception>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.GetEnumerator">
 
-             <summary>
 
-             When implemented by a class, returns an
 
-             <see cref="T:System.Collections.IDictionaryEnumerator"/> for the <see cref="T:System.Collections.IDictionary"/>.
 
-             </summary>
 
-             <returns>
 
-             An <see cref="T:System.Collections.IDictionaryEnumerator"/> for the <see cref="T:System.Collections.IDictionary"/>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.Add(`0,`1)">
 
-             <summary>
 
-             When implemented by a class, adds an element with the provided key and value to the <see cref="T:System.Collections.IDictionary"/>.
 
-             </summary>
 
-             <param name="key">The <see cref="T:System.Object"/> to use as the key of the element to add.</param>
 
-             <param name="value">The <see cref="T:System.Object"/> to use as the value of the element to add.</param>
 
-             <exception cref="T:System.ArgumentNullException"><paramref name="key"/> is <see langword="null"/>.</exception>
 
-             <exception cref="T:System.ArgumentException">
 
-             An element with the same key already exists in the <see cref="T:System.Collections.IDictionary"/>.
 
-             </exception>
 
-             <exception cref="T:System.NotSupportedException">
 
-             	<para>The <see cref="T:System.Collections.IDictionary"/> is read-only.</para>
 
-             	<para>-or-</para>
 
-             	<para>The <see cref="T:System.Collections.IDictionary"/> has a fixed size.</para>
 
-             </exception>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.CopyTo(System.Array,System.Int32)">
 
-             <summary>
 
-             When implemented by a class, copies the elements of
 
-             the <see cref="T:System.Collections.ICollection"/> to an <see cref="T:System.Array"/>, starting at a particular <see cref="T:System.Array"/> index.
 
-             </summary>
 
-             <param name="array">The one-dimensional <see cref="T:System.Array"/> that is the destination of the elements copied from <see cref="T:System.Collections.ICollection"/>. The <see cref="T:System.Array"/> must have zero-based indexing.</param>
 
-             <param name="index">The zero-based index in <paramref name="array"/> at which copying begins.</param>
 
-             <exception cref="T:System.ArgumentNullException">
 
-             	<paramref name="array"/> is <see langword="null"/>.</exception>
 
-             <exception cref="T:System.ArgumentOutOfRangeException">
 
-             	<paramref name="index"/> is less than zero.</exception>
 
-             <exception cref="T:System.ArgumentException">
 
-             	<para>
 
-             		<paramref name="array"/> is multidimensional.</para>
 
-             	<para>-or-</para>
 
-             	<para>
 
-             		<paramref name="index"/> is equal to or greater than the length of <paramref name="array"/>.</para>
 
-             	<para>-or-</para>
 
-             	<para>The number of elements in the source <see cref="T:System.Collections.ICollection"/> is greater than the available space from <paramref name="index"/> to the end of the destination <paramref name="array"/>.</para>
 
-             </exception>
 
-             <exception cref="T:System.InvalidCastException">The type of the source <see cref="T:System.Collections.ICollection"/> cannot be cast automatically to the type of the destination <paramref name="array"/>.</exception>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.ClearDirtyFlag">
 
-             <summary>
 
-             Clear the 'dirty' flag (set dirty flag to <see langword="false" />).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.ContainsValue(`1)">
 
-             <summary>
 
-             Determines whether the specified obj contains value.
 
-             </summary>
 
-             <param name="obj">The obj.</param>
 
-             <returns>
 
-             	<c>true</c> if the specified obj contains value; otherwise, <c>false</c>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.EntrySet">
 
-             <summary>
 
-             Gets the entries as a set.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.Equals(System.Object)">
 
-             <summary>
 
-             Determines whether the specified <see cref="T:System.Object"/> is equal to the current <see cref="T:System.Object"/>.
 
-             </summary>
 
-             <param name="obj">The <see cref="T:System.Object"/> to compare with the current <see cref="T:System.Object"/>.</param>
 
-             <returns>
 
-             	<see langword="true"/> if the specified <see cref="T:System.Object"/> is equal to the
 
-             current <see cref="T:System.Object"/>; otherwise, <see langword="false"/>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.GetHashCode">
 
-             <summary>
 
-             Serves as a hash function for a particular type, suitable
 
-             for use in hashing algorithms and data structures like a hash table.
 
-             </summary>
 
-             <returns>
 
-             A hash code for the current <see cref="T:System.Object"/>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.KeySet">
 
-             <summary>
 
-             Gets keyset for this map.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.Put(`0,`1)">
 
-             <summary>
 
-             Puts the value behind a specified key.
 
-             </summary>
 
-             <param name="key">The key.</param>
 
-             <param name="val">The val.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.DirtyFlagMap`2.PutAll(System.Collections.Generic.IDictionary{`0,`1})">
 
-             <summary>
 
-             Puts all.
 
-             </summary>
 
-             <param name="t">The t.</param>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.Dirty">
 
-             <summary>
 
-             Determine whether the <see cref="T:System.Collections.IDictionary"/> is flagged dirty.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.WrappedMap">
 
-             <summary>
 
-             Get a direct handle to the underlying Map.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.IsEmpty">
 
-             <summary>
 
-             Gets a value indicating whether this instance is empty.
 
-             </summary>
 
-             <value><c>true</c> if this instance is empty; otherwise, <c>false</c>.</value>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.Item(`0)">
 
-             <summary>
 
-             Gets or sets the <see cref="T:System.Object"/> with the specified key.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.Count">
 
-             <summary>
 
-             When implemented by a class, gets the number of
 
-             elements contained in the <see cref="T:System.Collections.ICollection"/>.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.Values">
 
-             <summary>
 
-             When implemented by a class, gets an <see cref="T:System.Collections.ICollection"/> containing the values in the <see cref="T:System.Collections.IDictionary"/>.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.Keys">
 
-             <summary>
 
-             When implemented by a class, gets an <see cref="T:System.Collections.ICollection"/> containing the keys of the <see cref="T:System.Collections.IDictionary"/>.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.IsReadOnly">
 
-             <summary>
 
-             When implemented by a class, gets a value indicating whether the <see cref="T:System.Collections.IDictionary"/>
 
-             is read-only.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.IsFixedSize">
 
-             <summary>
 
-             When implemented by a class, gets a value indicating whether the <see cref="T:System.Collections.IDictionary"/>
 
-             has a fixed size.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.SyncRoot">
 
-             <summary>
 
-             When implemented by a class, gets an object that
 
-             can be used to synchronize access to the <see cref="T:System.Collections.ICollection"/>.
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="P:Quartz.Util.DirtyFlagMap`2.IsSynchronized">
 
-             <summary>
 
-             When implemented by a class, gets a value
 
-             indicating whether access to the <see cref="T:System.Collections.ICollection"/> is synchronized
 
-             (thread-safe).
 
-             </summary>
 
-             <value></value>
 
-         </member>
 
-         <member name="T:Quartz.Util.FileUtil">
 
-             <summary>
 
-             Utility class for file handling related things.
 
-             </summary>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="M:Quartz.Util.FileUtil.ResolveFile(System.String)">
 
-             <summary>
 
-             Resolves file to actual file if for example relative '~' used.
 
-             </summary>
 
-             <param name="fName">File name to check</param>
 
-             <returns>Expanded file name or actual no resolving was done.</returns>
 
-         </member>
 
-         <member name="T:Quartz.Util.Key`1">
 
-             <summary>
 
-             Object representing a job or trigger key.
 
-             </summary>
 
-             <author>  <a href="mailto:jeff@binaryfeed.org">Jeffrey Wescott</a></author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.Util.Key`1.DefaultGroup">
 
-             <summary>
 
-             The default group for scheduling entities, with the value "DEFAULT".
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.Key`1.#ctor(System.String,System.String)">
 
-             <summary> 
 
-             Construct a new key with the given name and group.
 
-             </summary>
 
-             <param name="name">the name</param>
 
-             <param name="group">the group</param>
 
-         </member>
 
-         <member name="M:Quartz.Util.Key`1.ToString">
 
-             <summary> <para>
 
-             Return the string representation of the key. The format will be:
 
-             <group>.<name>.
 
-             </para>
 
-             
 
-             </summary>
 
-             <returns> the string representation of the key
 
-             </returns>
 
-         </member>
 
-         <member name="P:Quartz.Util.Key`1.Name">
 
-             <summary>
 
-             Get the name portion of the key.
 
-             </summary>
 
-             <returns> the name
 
-             </returns>
 
-         </member>
 
-         <member name="P:Quartz.Util.Key`1.Group">
 
-             <summary> <para>
 
-             Get the group portion of the key.
 
-             </para>
 
-             
 
-             </summary>
 
-             <returns> the group
 
-             </returns>
 
-         </member>
 
-         <member name="T:Quartz.Util.LogicalThreadContext">
 
-             <summary>
 
-             Wrapper class to access thread local data.
 
-             Data is either accessed from thread or HTTP Context's 
 
-             data if HTTP Context is available.
 
-             </summary>
 
-             <author>Marko Lahma .NET</author>
 
-         </member>
 
-         <member name="M:Quartz.Util.LogicalThreadContext.GetData``1(System.String)">
 
-             <summary>
 
-             Retrieves an object with the specified name.
 
-             </summary>
 
-             <param name="name">The name of the item.</param>
 
-             <returns>The object in the call context associated with the specified name or null if no object has been stored previously</returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.LogicalThreadContext.SetData(System.String,System.Object)">
 
-             <summary>
 
-             Stores a given object and associates it with the specified name.
 
-             </summary>
 
-             <param name="name">The name with which to associate the new item.</param>
 
-             <param name="value">The object to store in the call context.</param>
 
-         </member>
 
-         <member name="M:Quartz.Util.LogicalThreadContext.FreeNamedDataSlot(System.String)">
 
-             <summary>
 
-             Empties a data slot with the specified name.
 
-             </summary>
 
-             <param name="name">The name of the data slot to empty.</param>
 
-         </member>
 
-         <member name="T:Quartz.Util.ObjectExtensions">
 
-             <summary>
 
-             Generic extension methods for objects.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.ObjectExtensions.DeepClone``1(``0)">
 
-             <summary>
 
-             Creates a deep copy of object by serializing to memory stream.
 
-             </summary>
 
-             <param name="obj"></param>
 
-         </member>
 
-         <member name="T:Quartz.Util.ObjectUtils">
 
-             <summary>
 
-             Utility methods that are used to convert objects from one type into another.
 
-             </summary>
 
-             <author>Aleksandar Seovic</author>
 
-             <author>Marko Lahma</author>
 
-         </member>
 
-         <member name="M:Quartz.Util.ObjectUtils.ConvertValueIfNecessary(System.Type,System.Object)">
 
-             <summary>
 
-             Convert the value to the required <see cref="T:System.Type"/> (if necessary from a string).
 
-             </summary>
 
-             <param name="newValue">The proposed change value.</param>
 
-             <param name="requiredType">
 
-             The <see cref="T:System.Type"/> we must convert to.
 
-             </param>
 
-             <returns>The new value, possibly the result of type conversion.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.ObjectUtils.IsAssignableFrom(System.Object,System.Type)">
 
-             <summary>
 
-             Determines whether value is assignable to required type.
 
-             </summary>
 
-             <param name="value">The value to check.</param>
 
-             <param name="requiredType">Type of the required.</param>
 
-             <returns>
 
-             	<c>true</c> if value can be assigned as given type; otherwise, <c>false</c>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.ObjectUtils.InstantiateType``1(System.Type)">
 
-             <summary>
 
-             Instantiates an instance of the type specified.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.ObjectUtils.SetObjectProperties(System.Object,System.String[],System.Object[])">
 
-             <summary>
 
-             Sets the object properties using reflection.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.ObjectUtils.SetObjectProperties(System.Object,System.Collections.Specialized.NameValueCollection)">
 
-             <summary>
 
-             Sets the object properties using reflection.
 
-             </summary>
 
-             <param name="obj">The object to set values to.</param>
 
-             <param name="props">The properties to set to object.</param>
 
-         </member>
 
-         <member name="T:Quartz.Util.PropertiesParser">
 
-             <summary>
 
-             This is an utility class used to parse the properties.
 
-             </summary>
 
-             <author> James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.#ctor(System.Collections.Specialized.NameValueCollection)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Util.PropertiesParser"/> class.
 
-             </summary>
 
-             <param name="props">The props.</param>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetStringProperty(System.String)">
 
-             <summary>
 
-             Gets the string property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetStringProperty(System.String,System.String)">
 
-             <summary>
 
-             Gets the string property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="defaultValue">The default value.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetStringArrayProperty(System.String)">
 
-             <summary>
 
-             Gets the string array property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetStringArrayProperty(System.String,System.String[])">
 
-             <summary>
 
-             Gets the string array property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="defaultValue">The default value.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetBooleanProperty(System.String)">
 
-             <summary>
 
-             Gets the boolean property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetBooleanProperty(System.String,System.Boolean)">
 
-             <summary>
 
-             Gets the boolean property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="defaultValue">if set to <c>true</c> [defaultValue].</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetByteProperty(System.String)">
 
-             <summary>
 
-             Gets the byte property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetByteProperty(System.String,System.Byte)">
 
-             <summary>
 
-             Gets the byte property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="defaultValue">The default value.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetCharProperty(System.String)">
 
-             <summary>
 
-             Gets the char property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetCharProperty(System.String,System.Char)">
 
-             <summary>
 
-             Gets the char property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="defaultValue">The default value.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetDoubleProperty(System.String)">
 
-             <summary>
 
-             Gets the double property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetDoubleProperty(System.String,System.Double)">
 
-             <summary>
 
-             Gets the double property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="defaultValue">The default value.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetFloatProperty(System.String)">
 
-             <summary>
 
-             Gets the float property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetFloatProperty(System.String,System.Single)">
 
-             <summary>
 
-             Gets the float property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="defaultValue">The default value.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetIntProperty(System.String)">
 
-             <summary>
 
-             Gets the int property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetIntProperty(System.String,System.Int32)">
 
-             <summary>
 
-             Gets the int property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="defaultValue">The default value.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetIntArrayProperty(System.String)">
 
-             <summary>
 
-             Gets the int array property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetIntArrayProperty(System.String,System.Collections.Generic.IList{System.Int32})">
 
-             <summary>
 
-             Gets the int array property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="defaultValue">The default value.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetLongProperty(System.String)">
 
-             <summary>
 
-             Gets the long property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetLongProperty(System.String,System.Int64)">
 
-             <summary>
 
-             Gets the long property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="def">The def.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetTimeSpanProperty(System.String,System.TimeSpan)">
 
-             <summary>
 
-             Gets the TimeSpan property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="def">The def.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetShortProperty(System.String)">
 
-             <summary>
 
-             Gets the short property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetShortProperty(System.String,System.Int16)">
 
-             <summary>
 
-             Gets the short property.
 
-             </summary>
 
-             <param name="name">The name.</param>
 
-             <param name="defaultValue">The default value.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetPropertyGroups(System.String)">
 
-             <summary>
 
-             Gets the property groups.
 
-             </summary>
 
-             <param name="prefix">The prefix.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetPropertyGroup(System.String)">
 
-             <summary>
 
-             Gets the property group.
 
-             </summary>
 
-             <param name="prefix">The prefix.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetPropertyGroup(System.String,System.Boolean)">
 
-             <summary>
 
-             Gets the property group.
 
-             </summary>
 
-             <param name="prefix">The prefix.</param>
 
-             <param name="stripPrefix">if set to <c>true</c> [strip prefix].</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.GetPropertyGroup(System.String,System.Boolean,System.String[])">
 
-             <summary>
 
-             Get all properties that start with the given prefix.  
 
-             </summary>
 
-             <param name="prefix">The prefix for which to search.  If it does not end in a "." then one will be added to it for search purposes.</param>
 
-             <param name="stripPrefix">Whether to strip off the given <paramref name="prefix"/> in the result's keys.</param>
 
-             <param name="excludedPrefixes">Optional array of fully qualified prefixes to exclude.  For example if <see paramref="prefix"/> is "a.b.c", then <see paramref="excludedPrefixes"/> might be "a.b.c.ignore".</param>
 
-             <returns>Group of <see cref="T:System.Collections.Specialized.NameValueCollection"/> that start with the given prefix, optionally have that prefix removed, and do not include properties that start with one of the given excluded prefixes.</returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.ReadFromEmbeddedAssemblyResource(System.String)">
 
-             <summary>
 
-             Reads the properties from assembly (embedded resource).
 
-             </summary>
 
-             <param name="resourceName">The file name to read resources from.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.PropertiesParser.ReadFromFileResource(System.String)">
 
-             <summary>
 
-             Reads the properties from file system.
 
-             </summary>
 
-             <param name="fileName">The file name to read resources from.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="P:Quartz.Util.PropertiesParser.UnderlyingProperties">
 
-             <summary>
 
-             Gets the underlying properties.
 
-             </summary>
 
-             <value>The underlying properties.</value>
 
-         </member>
 
-         <member name="T:Quartz.Util.QuartzEnvironment">
 
-             <summary>
 
-             Environment access helpers that fail gracefully if under medium trust.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.QuartzEnvironment.GetEnvironmentVariable(System.String)">
 
-             <summary>
 
-             Retrieves the value of an environment variable from the current process.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.QuartzEnvironment.GetEnvironmentVariables">
 
-             <summary>
 
-             Retrieves all environment variable names and their values from the current process.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Util.QuartzEnvironment.IsRunningOnMono">
 
-             <summary>
 
-             Return whether we are currently running under Mono runtime.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Util.StringExtensions">
 
-             <summary>
 
-             Extension methods for <see cref="T:System.String"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringExtensions.NullSafeTrim(System.String)">
 
-             <summary>
 
-             Allows null-safe trimming of string.
 
-             </summary>
 
-             <param name="s"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringExtensions.TrimEmptyToNull(System.String)">
 
-             <summary>
 
-             Trims string and if resulting string is empty, null is returned.
 
-             </summary>
 
-             <param name="s"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Util.StringKeyDirtyFlagMap">
 
-             <summary>
 
-             An implementation of <see cref="T:System.Collections.IDictionary"/> that wraps another <see cref="T:System.Collections.IDictionary"/>
 
-             and flags itself 'dirty' when it is modified, enforces that all keys are
 
-             strings. 
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.#ctor">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Util.StringKeyDirtyFlagMap"/> class.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.#ctor(System.Int32)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.Util.StringKeyDirtyFlagMap"/> class.
 
-             </summary>
 
-             <param name="initialCapacity">The initial capacity.</param>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.Equals(System.Object)">
 
-             <summary>
 
-             Determines whether the specified <see cref="T:System.Object"/> is equal to the current <see cref="T:System.Object"/>.
 
-             </summary>
 
-             <param name="obj">The <see cref="T:System.Object"/> to compare with the current <see cref="T:System.Object"/>.</param>
 
-             <returns>
 
-             	<see langword="true"/> if the specified <see cref="T:System.Object"/> is equal to the
 
-             current <see cref="T:System.Object"/>; otherwise, <see langword="false"/>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetHashCode">
 
-             <summary>
 
-             Serves as a hash function for a particular type, suitable
 
-             for use in hashing algorithms and data structures like a hash table.
 
-             </summary>
 
-             <returns>
 
-             A hash code for the current <see cref="T:System.Object"/>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetKeys">
 
-             <summary>
 
-             Gets the keys.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.PutAll(System.Collections.Generic.IDictionary{System.String,System.Object})">
 
-             <summary>
 
-             Adds the name-value pairs in the given <see cref="T:System.Collections.IDictionary"/> to the <see cref="T:Quartz.JobDataMap"/>.
 
-             <para>
 
-             All keys must be <see cref="T:System.String"/>s, and all values must be serializable.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.Put(System.String,System.Int32)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Int32"/> value to the <see cref="T:Quartz.IJob"/>'s
 
-             data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.Put(System.String,System.Int64)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Int64"/> value to the <see cref="T:Quartz.IJob"/>'s
 
-             data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.Put(System.String,System.Single)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Single"/> value to the <see cref="T:Quartz.IJob"/>'s
 
-             data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.Put(System.String,System.Double)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Double"/> value to the <see cref="T:Quartz.IJob"/>'s
 
-             data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.Put(System.String,System.Boolean)">
 
-             <summary> 
 
-             Adds the given <see cref="T:System.Boolean"/> value to the <see cref="T:Quartz.IJob"/>'s
 
-             data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.Put(System.String,System.Char)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Char"/> value to the <see cref="T:Quartz.IJob"/>'s
 
-             data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.Put(System.String,System.String)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.String"/> value to the <see cref="T:Quartz.IJob"/>'s
 
-             data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetInt(System.String)">
 
-             <summary> 
 
-             Retrieve the identified <see cref="T:System.Int32"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetLong(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Int64"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetFloat(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Single"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetDouble(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Double"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetBoolean(System.String)">
 
-             <summary> 
 
-             Retrieve the identified <see cref="T:System.Boolean"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetChar(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Char"/> value from the <see cref="T:Quartz.JobDataMap"/>. 
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetString(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.String"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetDateTime(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.DateTime"/> value from the <see cref="T:Quartz.JobDataMap"/>. 
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetDateTimeOffset(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.DateTimeOffset"/> value from the <see cref="T:Quartz.JobDataMap"/>. 
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.StringKeyDirtyFlagMap.GetTimeSpan(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.TimeSpan"/> value from the <see cref="T:Quartz.JobDataMap"/>. 
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Util.TimeZoneUtil.ConvertTime(System.DateTimeOffset,System.TimeZoneInfo)">
 
-             <summary>
 
-             TimeZoneInfo.ConvertTime is not supported under mono
 
-             </summary>
 
-             <param name="dateTimeOffset"></param>
 
-             <param name="timeZoneInfo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.TimeZoneUtil.GetUtcOffset(System.DateTimeOffset,System.TimeZoneInfo)">
 
-             <summary>
 
-             TimeZoneInfo.GetUtcOffset(DateTimeOffset) is not supported under mono
 
-             </summary>
 
-             <param name="dateTimeOffset"></param>
 
-             <param name="timeZoneInfo"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.Util.TimeZoneUtil.FindTimeZoneById(System.String)">
 
-             <summary>
 
-             Tries to find time zone with given id, has ability do some fallbacks when necessary.
 
-             </summary>
 
-             <param name="id">System id of the time zone.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.QuartzXmlConfiguration20">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.QuartzXmlConfiguration20.preprocessingcommands">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.QuartzXmlConfiguration20.processingdirectives">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.QuartzXmlConfiguration20.schedule">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.QuartzXmlConfiguration20.version">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.preprocessingcommandsType">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.preprocessingcommandsType.deletejobsingroup">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.preprocessingcommandsType.deletetriggersingroup">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.preprocessingcommandsType.deletejob">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.preprocessingcommandsType.deletetrigger">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.preprocessingcommandsTypeDeletejob">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.preprocessingcommandsTypeDeletejob.name">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.preprocessingcommandsTypeDeletejob.group">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.abstractTriggerType">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.name">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.group">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.description">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.jobname">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.jobgroup">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.priority">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.calendarname">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.jobdatamap">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.Item">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.endtime">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.abstractTriggerType.endtimeSpecified">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.jobdatamapType">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.jobdatamapType.entry">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.entryType">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.entryType.key">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.entryType.value">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.calendarIntervalTriggerType">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.calendarIntervalTriggerType.misfireinstruction">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.calendarIntervalTriggerType.repeatinterval">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.calendarIntervalTriggerType.repeatintervalunit">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.cronTriggerType">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.cronTriggerType.misfireinstruction">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.cronTriggerType.cronexpression">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.cronTriggerType.timezone">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.simpleTriggerType">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.simpleTriggerType.misfireinstruction">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.simpleTriggerType.repeatcount">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.simpleTriggerType.repeatinterval">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.triggerType">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.triggerType.Item">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.jobdetailType">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.jobdetailType.name">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.jobdetailType.group">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.jobdetailType.description">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.jobdetailType.jobtype">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.jobdetailType.durable">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.jobdetailType.recover">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.jobdetailType.jobdatamap">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.processingdirectivesType">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.processingdirectivesType.overwriteexistingdata">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.processingdirectivesType.ignoreduplicates">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.processingdirectivesType.scheduletriggerrelativetoreplacedtrigger">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.preprocessingcommandsTypeDeletetrigger">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.preprocessingcommandsTypeDeletetrigger.name">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.preprocessingcommandsTypeDeletetrigger.group">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.JobSchedulingData20.jobschedulingdataSchedule">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.jobschedulingdataSchedule.job">
 
-             <remarks/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.JobSchedulingData20.jobschedulingdataSchedule.trigger">
 
-             <remarks/>
 
-         </member>
 
-         <member name="T:Quartz.Xml.ValidationException">
 
-             <summary> 
 
-             Reports JobSchedulingDataProcessor validation exceptions.
 
-             </summary>
 
-             <author> <a href="mailto:bonhamcm@thirdeyeconsulting.com">Chris Bonham</a></author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.Xml.ValidationException.#ctor">
 
-             <summary>
 
-             Constructor for ValidationException.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Xml.ValidationException.#ctor(System.String)">
 
-             <summary>
 
-             Constructor for ValidationException.
 
-             </summary>
 
-             <param name="message">exception message.</param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.ValidationException.#ctor(System.Collections.Generic.IEnumerable{System.Exception})">
 
-             <summary>
 
-             Constructor for ValidationException.
 
-             </summary>
 
-             <param name="errors">collection of validation exceptions.</param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.ValidationException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.SchedulerException"/> class.
 
-             </summary>
 
-             <param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"></see> that holds the serialized object data about the exception being thrown.</param>
 
-             <param name="context">The <see cref="T:System.Runtime.Serialization.StreamingContext"></see> that contains contextual information about the source or destination.</param>
 
-             <exception cref="T:System.Runtime.Serialization.SerializationException">The class name is null or <see cref="P:System.Exception.HResult"></see> is zero (0). </exception>
 
-             <exception cref="T:System.ArgumentNullException">The info parameter is null. </exception>
 
-         </member>
 
-         <member name="P:Quartz.Xml.ValidationException.ValidationExceptions">
 
-             <summary>
 
-             Gets the validation exceptions.
 
-             </summary>
 
-             <value>The validation exceptions.</value>
 
-         </member>
 
-         <member name="P:Quartz.Xml.ValidationException.Message">
 
-             <summary>
 
-             Returns the detail message string.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.Xml.XMLSchedulingDataProcessor">
 
-             <summary> 
 
-             Parses an XML file that declares Jobs and their schedules (Triggers).
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The xml document must conform to the format defined in "job_scheduling_data_2_0.xsd"
 
-             </para>
 
-             
 
-             <para>
 
-             After creating an instance of this class, you should call one of the <see cref="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessFile"/>
 
-             functions, after which you may call the ScheduledJobs()
 
-             function to get a handle to the defined Jobs and Triggers, which can then be
 
-             scheduled with the <see cref="T:Quartz.IScheduler"/>. Alternatively, you could call
 
-             the <see cref="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessFileAndScheduleJobs(Quartz.IScheduler)"/> function to do all of this
 
-             in one step.
 
-             </para>
 
-             
 
-             <para>
 
-             The same instance can be used again and again, with the list of defined Jobs
 
-             being cleared each time you call a <see cref="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessFile"/> method,
 
-             however a single instance is not thread-safe.
 
-             </para>
 
-             </remarks>
 
-             <author><a href="mailto:bonhamcm@thirdeyeconsulting.com">Chris Bonham</a></author>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-             <author>Christian Krumm (.NET Bugfix)</author>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.#ctor(Quartz.Spi.ITypeLoadHelper)">
 
-             <summary>
 
-             Constructor for XMLSchedulingDataProcessor.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessFile">
 
-             <summary> 
 
-             Process the xml file in the default location (a file named
 
-             "quartz_jobs.xml" in the current working directory).
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessFile(System.String)">
 
-             <summary>
 
-             Process the xml file named <see param="fileName" />.
 
-             </summary>
 
-             <param name="fileName">meta data file name.</param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessFile(System.String,System.String)">
 
-             <summary>
 
-             Process the xmlfile named <see param="fileName" /> with the given system
 
-             ID.
 
-             </summary>
 
-             <param name="fileName">Name of the file.</param>
 
-             <param name="systemId">The system id.</param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessStream(System.IO.Stream,System.String)">
 
-             <summary>
 
-             Process the xmlfile named <see param="fileName" /> with the given system
 
-             ID.
 
-             </summary>
 
-             <param name="stream">The stream.</param>
 
-             <param name="systemId">The system id.</param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessFileAndScheduleJobs(Quartz.IScheduler,System.Boolean)">
 
-             <summary>
 
-             Process the xml file in the default location, and schedule all of the jobs defined within it.
 
-             </summary>
 
-             <remarks>Note that we will set overWriteExistingJobs after the default xml is parsed.</remarks>
 
-             <param name="sched"></param>
 
-             <param name="overWriteExistingJobs"></param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessFileAndScheduleJobs(Quartz.IScheduler)">
 
-             <summary> 
 
-             Process the xml file in the default location, and schedule all of the
 
-             jobs defined within it.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessFileAndScheduleJobs(System.String,Quartz.IScheduler)">
 
-             <summary>
 
-             Process the xml file in the given location, and schedule all of the
 
-             jobs defined within it.
 
-             </summary>
 
-             <param name="fileName">meta data file name.</param>
 
-             <param name="sched">The scheduler.</param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessFileAndScheduleJobs(System.String,System.String,Quartz.IScheduler)">
 
-             <summary>
 
-             Process the xml file in the given location, and schedule all of the
 
-             jobs defined within it.
 
-             </summary>
 
-             <param name="fileName">Name of the file.</param>
 
-             <param name="systemId">The system id.</param>
 
-             <param name="sched">The sched.</param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ProcessStreamAndScheduleJobs(System.IO.Stream,Quartz.IScheduler)">
 
-             <summary>
 
-             Process the xml file in the given location, and schedule all of the
 
-             jobs defined within it.
 
-             </summary>
 
-             <param name="stream">stream to read XML data from.</param>
 
-             <param name="sched">The sched.</param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ScheduleJobs(Quartz.IScheduler)">
 
-             <summary>
 
-             Schedules the given sets of jobs and triggers.
 
-             </summary>
 
-             <param name="sched">The sched.</param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.AddValidationException(System.Xml.XmlException)">
 
-             <summary>
 
-             Adds a detected validation exception.
 
-             </summary>
 
-             <param name="e">The exception.</param>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.ClearValidationExceptions">
 
-             <summary>
 
-             Resets the the number of detected validation exceptions.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.Xml.XMLSchedulingDataProcessor.MaybeThrowValidationException">
 
-             <summary>
 
-             Throws a ValidationException if the number of validationExceptions
 
-             detected is greater than zero.
 
-             </summary>
 
-             <exception cref="T:Quartz.Xml.ValidationException"> 
 
-             DTD validation exception.
 
-             </exception>
 
-         </member>
 
-         <member name="P:Quartz.Xml.XMLSchedulingDataProcessor.OverWriteExistingData">
 
-             <summary>
 
-             Whether the existing scheduling data (with same identifiers) will be 
 
-             overwritten. 
 
-             </summary>
 
-             <remarks>
 
-             If false, and <see cref="P:Quartz.Xml.XMLSchedulingDataProcessor.IgnoreDuplicates"/> is not false, and jobs or 
 
-             triggers with the same names already exist as those in the file, an 
 
-             error will occur.
 
-             </remarks> 
 
-             <seealso cref="P:Quartz.Xml.XMLSchedulingDataProcessor.IgnoreDuplicates"/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.XMLSchedulingDataProcessor.IgnoreDuplicates">
 
-             <summary>
 
-             If true (and <see cref="P:Quartz.Xml.XMLSchedulingDataProcessor.OverWriteExistingData"/> is false) then any 
 
-             job/triggers encountered in this file that have names that already exist 
 
-             in the scheduler will be ignored, and no error will be produced.
 
-             </summary>
 
-             <seealso cref="P:Quartz.Xml.XMLSchedulingDataProcessor.OverWriteExistingData"/>
 
-         </member>
 
-         <member name="P:Quartz.Xml.XMLSchedulingDataProcessor.ScheduleTriggerRelativeToReplacedTrigger">
 
-             <summary>
 
-             If true (and <see cref="P:Quartz.Xml.XMLSchedulingDataProcessor.OverWriteExistingData"/> is true) then any 
 
-             job/triggers encountered in this file that already exist is scheduler
 
-             will be updated with start time relative to old trigger. Effectively
 
-             new trigger's last fire time will be updated to old trigger's last fire time
 
-             and trigger's next fire time will updated to be next from this last fire time.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.Xml.XMLSchedulingDataProcessor.Log">
 
-             <summary>
 
-             Gets the log.
 
-             </summary>
 
-             <value>The log.</value>
 
-         </member>
 
-         <member name="T:Quartz.Xml.XMLSchedulingDataProcessor.Constants">
 
-             <summary>
 
-             Helper class to map constant names to their values.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.CalendarIntervalScheduleBuilder">
 
-             <summary>
 
-             CalendarIntervalScheduleBuilder is a <see cref="T:Quartz.IScheduleBuilder"/>
 
-             that defines calendar time (day, week, month, year) interval-based
 
-             schedules for Triggers.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             Quartz provides a builder-style API for constructing scheduling-related
 
-             entities via a Domain-Specific Language (DSL).  The DSL can best be
 
-             utilized through the usage of static imports of the methods on the classes
 
-             <see cref="T:Quartz.TriggerBuilder"/>, <see cref="T:Quartz.JobBuilder"/>,
 
-             <see cref="T:Quartz.DateBuilder"/>, <see cref="T:Quartz.JobKey"/>, <see cref="T:Quartz.TriggerKey"/>
 
-             and the various <see cref="T:Quartz.IScheduleBuilder"/> implementations.
 
-             </para>
 
-             <para>Client code can then use the DSL to write code such as this:</para>
 
-             <code>
 
-             JobDetail job = JobBuilder.Create<MyJob>()
 
-                 .WithIdentity("myJob")
 
-                 .Build();
 
-             Trigger trigger = TriggerBuilder.Create()
 
-                 .WithIdentity("myTrigger", "myTriggerGroup")
 
-                 .WithSimpleSchedule(x => x
 
-                     .WithIntervalInHours(1)
 
-                     .RepeatForever())
 
-                 .StartAt(DateBuilder.FutureDate(10, IntervalUnit.Minute))
 
-                 .Build();
 
-             scheduler.scheduleJob(job, trigger);
 
-             </code>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.ICalendarIntervalTrigger"/>
 
-             <seealso cref="T:Quartz.CronScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.IScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.SimpleScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.TriggerBuilder"/>
 
-         </member>
 
-         <member name="T:Quartz.ScheduleBuilder`1">
 
-             <summary>
 
-             Base class for <see cref="T:Quartz.IScheduleBuilder"/> implementors.
 
-             </summary>
 
-             <typeparam name="T"></typeparam>
 
-         </member>
 
-         <member name="T:Quartz.IScheduleBuilder">
 
-             <summary>
 
-             Schedule builders offer fluent interface and are responsible for creating schedules.
 
-             </summary>
 
-             <seealso cref="T:Quartz.SimpleScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.CalendarIntervalScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.CronScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.DailyTimeIntervalScheduleBuilder"/>
 
-         </member>
 
-         <member name="M:Quartz.IScheduleBuilder.Build">
 
-             <summary>
 
-             Build the actual Trigger -- NOT intended to be invoked by end users,
 
-             but will rather be invoked by a TriggerBuilder which this
 
-             ScheduleBuilder is given to.
 
-             </summary>
 
-             <seealso cref="M:Quartz.TriggerBuilder.WithSchedule(Quartz.IScheduleBuilder)"/>
 
-         </member>
 
-         <member name="M:Quartz.ScheduleBuilder`1.Build">
 
-             <summary>
 
-             Build the actual Trigger -- NOT intended to be invoked by end users,
 
-             but will rather be invoked by a TriggerBuilder which this
 
-             ScheduleBuilder is given to.
 
-             </summary>
 
-             <seealso cref="M:Quartz.TriggerBuilder.WithSchedule(Quartz.IScheduleBuilder)"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.Create">
 
-             <summary>
 
-             Create a CalendarIntervalScheduleBuilder.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.Build">
 
-             <summary>
 
-             Build the actual Trigger -- NOT intended to be invoked by end users,
 
-             but will rather be invoked by a TriggerBuilder which this 
 
-             ScheduleBuilder is given to.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithInterval(System.Int32,Quartz.IntervalUnit)">
 
-             <summary>
 
-             Specify the time unit and interval for the Trigger to be produced.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="interval">the interval at which the trigger should repeat.</param>
 
-             <param name="unit"> the time unit (IntervalUnit) of the interval.</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatInterval"/>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithIntervalInSeconds(System.Int32)">
 
-             <summary>
 
-             Specify an interval in the IntervalUnit.SECOND that the produced
 
-             Trigger will repeat at.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="intervalInSeconds">the number of seconds at which the trigger should repeat.</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatInterval"/>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithIntervalInMinutes(System.Int32)">
 
-             <summary>
 
-             Specify an interval in the IntervalUnit.MINUTE that the produced
 
-             Trigger will repeat at.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="intervalInMinutes">the number of minutes at which the trigger should repeat.</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatInterval"/>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithIntervalInHours(System.Int32)">
 
-             <summary>
 
-             Specify an interval in the IntervalUnit.HOUR that the produced
 
-             Trigger will repeat at.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="intervalInHours">the number of hours at which the trigger should repeat.</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatInterval"/>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithIntervalInDays(System.Int32)">
 
-             <summary>
 
-             Specify an interval in the IntervalUnit.DAY that the produced
 
-             Trigger will repeat at.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="intervalInDays">the number of days at which the trigger should repeat.</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatInterval"/>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithIntervalInWeeks(System.Int32)">
 
-             <summary>
 
-             Specify an interval in the IntervalUnit.WEEK that the produced
 
-             Trigger will repeat at.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="intervalInWeeks">the number of weeks at which the trigger should repeat.</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatInterval"/>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithIntervalInMonths(System.Int32)">
 
-             <summary>
 
-             Specify an interval in the IntervalUnit.MONTH that the produced
 
-             Trigger will repeat at.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="intervalInMonths">the number of months at which the trigger should repeat.</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatInterval"/>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithIntervalInYears(System.Int32)">
 
-             <summary>
 
-             Specify an interval in the IntervalUnit.YEAR that the produced
 
-             Trigger will repeat at.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="intervalInYears">the number of years at which the trigger should repeat.</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatInterval"/>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithMisfireHandlingInstructionIgnoreMisfires">
 
-             <summary>
 
-             If the Trigger misfires, use the
 
-             <see cref="F:Quartz.MisfireInstruction.IgnoreMisfirePolicy"/> instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated CronScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.IgnoreMisfirePolicy"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithMisfireHandlingInstructionDoNothing">
 
-             <summary>
 
-             If the Trigger misfires, use the
 
-             <see cref="F:Quartz.MisfireInstruction.CalendarIntervalTrigger.DoNothing"/> instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.CalendarIntervalTrigger.DoNothing"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.WithMisfireHandlingInstructionFireAndProceed">
 
-             <summary>
 
-             If the Trigger misfires, use the
 
-             <see cref="F:Quartz.MisfireInstruction.CalendarIntervalTrigger.FireOnceNow"/> instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.CalendarIntervalTrigger.FireOnceNow"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.InTimeZone(System.TimeZoneInfo)">
 
-             <summary>
 
-             TimeZone in which to base the schedule.
 
-             </summary>
 
-             <param name="timezone">the time-zone for the schedule</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.TimeZone"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.PreserveHourOfDayAcrossDaylightSavings(System.Boolean)">
 
-             <summary>
 
-              If intervals are a day or greater, this property (set to true) will 
 
-              cause the firing of the trigger to always occur at the same time of day,
 
-              (the time of day of the startTime) regardless of daylight saving time 
 
-              transitions.  Default value is false.
 
-              </summary>
 
-              <remarks>
 
-              <para>
 
-              For example, without the property set, your trigger may have a start 
 
-              time of 9:00 am on March 1st, and a repeat interval of 2 days.  But 
 
-              after the daylight saving transition occurs, the trigger may start 
 
-              firing at 8:00 am every other day.
 
-              </para>
 
-              <para>
 
-              If however, the time of day does not exist on a given day to fire
 
-              (e.g. 2:00 am in the United States on the days of daylight saving
 
-              transition), the trigger will go ahead and fire one hour off on 
 
-              that day, and then resume the normal hour on other days.  If
 
-              you wish for the trigger to never fire at the "wrong" hour, then
 
-              you should set the property skipDayIfHourDoesNotExist.
 
-              </para>
 
-             </remarks>
 
-              <seealso cref="M:Quartz.CalendarIntervalScheduleBuilder.SkipDayIfHourDoesNotExist(System.Boolean)"/>
 
-              <seealso cref="T:System.TimeZone"/>
 
-              <seealso cref="M:Quartz.CalendarIntervalScheduleBuilder.InTimeZone(System.TimeZoneInfo)"/>
 
-              <seealso cref="M:Quartz.TriggerBuilder.StartAt(System.DateTimeOffset)"/>
 
-         </member>
 
-         <member name="M:Quartz.CalendarIntervalScheduleBuilder.SkipDayIfHourDoesNotExist(System.Boolean)">
 
-             <summary>
 
-             If intervals are a day or greater, and 
 
-             preserveHourOfDayAcrossDaylightSavings property is set to true, and the
 
-             hour of the day does not exist on a given day for which the trigger 
 
-             would fire, the day will be skipped and the trigger advanced a second
 
-             interval if this property is set to true.  Defaults to false.
 
-             </summary>
 
-             <remarks>
 
-             <b>CAUTION!</b>  If you enable this property, and your hour of day happens 
 
-             to be that of daylight savings transition (e.g. 2:00 am in the United 
 
-             States) and the trigger's interval would have had the trigger fire on
 
-             that day, then you may actually completely miss a firing on the day of 
 
-             transition if that hour of day does not exist on that day!  In such a 
 
-             case the next fire time of the trigger will be computed as double (if 
 
-             the interval is 2 days, then a span of 4 days between firings will 
 
-             occur).
 
-             </remarks>
 
-             <seealso cref="M:Quartz.CalendarIntervalScheduleBuilder.PreserveHourOfDayAcrossDaylightSavings(System.Boolean)"/>
 
-         </member>
 
-         <member name="T:Quartz.CalendarIntervalTriggerBuilderExtensions">
 
-             <summary>
 
-             Extension methods that attach <see cref="T:Quartz.CalendarIntervalScheduleBuilder"/> to <see cref="T:Quartz.TriggerBuilder"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.CronExpression">
 
-             <summary>
 
-             Provides a parser and evaluator for unix-like cron expressions. Cron 
 
-             expressions provide the ability to specify complex time combinations such as
 
-             "At 8:00am every Monday through Friday" or "At 1:30am every 
 
-             last Friday of the month". 
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             Cron expressions are comprised of 6 required fields and one optional field
 
-             separated by white space. The fields respectively are described as follows:
 
-             </para>
 
-             <table cellspacing="8">
 
-             <tr>
 
-             <th align="left">Field Name</th>
 
-             <th align="left"> </th>
 
-             <th align="left">Allowed Values</th>
 
-             <th align="left"> </th>
 
-             <th align="left">Allowed Special Characters</th>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">Seconds</td>
 
-             <td align="left"> </td>
 
-             <td align="left">0-59</td>
 
-             <td align="left"> </td>
 
-             <td align="left">, - /// /</td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">Minutes</td>
 
-             <td align="left"> </td>
 
-             <td align="left">0-59</td>
 
-             <td align="left"> </td>
 
-             <td align="left">, - /// /</td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">Hours</td>
 
-             <td align="left"> </td>
 
-             <td align="left">0-23</td>
 
-             <td align="left"> </td>
 
-             <td align="left">, - /// /</td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">Day-of-month</td>
 
-             <td align="left"> </td>
 
-             <td align="left">1-31</td>
 
-             <td align="left"> </td>
 
-             <td align="left">, - /// ? / L W C</td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">Month</td>
 
-             <td align="left"> </td>
 
-             <td align="left">1-12 or JAN-DEC</td>
 
-             <td align="left"> </td>
 
-             <td align="left">, - /// /</td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">Day-of-Week</td>
 
-             <td align="left"> </td>
 
-             <td align="left">1-7 or SUN-SAT</td>
 
-             <td align="left"> </td>
 
-             <td align="left">, - /// ? / L #</td>
 
-             </tr>
 
-             <tr>
 
-             <td align="left">Year (Optional)</td>
 
-             <td align="left"> </td>
 
-             <td align="left">empty, 1970-2199</td>
 
-             <td align="left"> </td>
 
-             <td align="left">, - /// /</td>
 
-             </tr>
 
-             </table>
 
-             <para>
 
-             The '*' character is used to specify all values. For example, "*" 
 
-             in the minute field means "every minute".
 
-             </para>
 
-             <para>
 
-             The '?' character is allowed for the day-of-month and day-of-week fields. It
 
-             is used to specify 'no specific value'. This is useful when you need to
 
-             specify something in one of the two fields, but not the other.
 
-             </para>
 
-             <para>
 
-             The '-' character is used to specify ranges For example "10-12" in
 
-             the hour field means "the hours 10, 11 and 12".
 
-             </para>
 
-             <para>
 
-             The ',' character is used to specify additional values. For example
 
-             "MON,WED,FRI" in the day-of-week field means "the days Monday,
 
-             Wednesday, and Friday".
 
-             </para>
 
-             <para>
 
-             The '/' character is used to specify increments. For example "0/15"
 
-             in the seconds field means "the seconds 0, 15, 30, and 45". And 
 
-             "5/15" in the seconds field means "the seconds 5, 20, 35, and
 
-             50".  Specifying '*' before the  '/' is equivalent to specifying 0 is
 
-             the value to start with. Essentially, for each field in the expression, there
 
-             is a set of numbers that can be turned on or off. For seconds and minutes, 
 
-             the numbers range from 0 to 59. For hours 0 to 23, for days of the month 0 to
 
-             31, and for months 1 to 12. The "/" character simply helps you turn
 
-             on every "nth" value in the given set. Thus "7/6" in the
 
-             month field only turns on month "7", it does NOT mean every 6th 
 
-             month, please note that subtlety.  
 
-             </para>
 
-             <para>
 
-             The 'L' character is allowed for the day-of-month and day-of-week fields.
 
-             This character is short-hand for "last", but it has different 
 
-             meaning in each of the two fields. For example, the value "L" in 
 
-             the day-of-month field means "the last day of the month" - day 31 
 
-             for January, day 28 for February on non-leap years. If used in the 
 
-             day-of-week field by itself, it simply means "7" or 
 
-             "SAT". But if used in the day-of-week field after another value, it
 
-             means "the last xxx day of the month" - for example "6L"
 
-             means "the last friday of the month". You can also specify an offset 
 
-             from the last day of the month, such as "L-3" which would mean the third-to-last 
 
-             day of the calendar month. <i>When using the 'L' option, it is important not to 
 
-             specify lists, or ranges of values, as you'll get confusing/unexpected results.</i>
 
-             </para>
 
-             <para>
 
-             The 'W' character is allowed for the day-of-month field.  This character 
 
-             is used to specify the weekday (Monday-Friday) nearest the given day.  As an 
 
-             example, if you were to specify "15W" as the value for the 
 
-             day-of-month field, the meaning is: "the nearest weekday to the 15th of
 
-             the month". So if the 15th is a Saturday, the trigger will fire on 
 
-             Friday the 14th. If the 15th is a Sunday, the trigger will fire on Monday the
 
-             16th. If the 15th is a Tuesday, then it will fire on Tuesday the 15th. 
 
-             However if you specify "1W" as the value for day-of-month, and the
 
-             1st is a Saturday, the trigger will fire on Monday the 3rd, as it will not 
 
-             'jump' over the boundary of a month's days.  The 'W' character can only be 
 
-             specified when the day-of-month is a single day, not a range or list of days.
 
-             </para>
 
-             <para>
 
-             The 'L' and 'W' characters can also be combined for the day-of-month 
 
-             expression to yield 'LW', which translates to "last weekday of the 
 
-             month".
 
-             </para>
 
-             <para>
 
-             The '#' character is allowed for the day-of-week field. This character is
 
-             used to specify "the nth" XXX day of the month. For example, the 
 
-             value of "6#3" in the day-of-week field means the third Friday of 
 
-             the month (day 6 = Friday and "#3" = the 3rd one in the month). 
 
-             Other examples: "2#1" = the first Monday of the month and 
 
-             "4#5" = the fifth Wednesday of the month. Note that if you specify
 
-             "#5" and there is not 5 of the given day-of-week in the month, then
 
-             no firing will occur that month. If the '#' character is used, there can
 
-             only be one expression in the day-of-week field ("3#1,6#3" is 
 
-             not valid, since there are two expressions).
 
-             </para>
 
-             <para>
 
-             <!--The 'C' character is allowed for the day-of-month and day-of-week fields.
 
-             This character is short-hand for "calendar". This means values are
 
-             calculated against the associated calendar, if any. If no calendar is
 
-             associated, then it is equivalent to having an all-inclusive calendar. A
 
-             value of "5C" in the day-of-month field means "the first day included by the
 
-             calendar on or after the 5th". A value of "1C" in the day-of-week field
 
-             means "the first day included by the calendar on or after Sunday". -->
 
-             </para>
 
-             <para>
 
-             The legal characters and the names of months and days of the week are not
 
-             case sensitive.
 
-             </para>
 
-             <para>
 
-             <b>NOTES:</b>
 
-             <ul>
 
-             <li>Support for specifying both a day-of-week and a day-of-month value is
 
-             not complete (you'll need to use the '?' character in one of these fields).
 
-             </li>
 
-             <li>Overflowing ranges is supported - that is, having a larger number on 
 
-             the left hand side than the right. You might do 22-2 to catch 10 o'clock 
 
-             at night until 2 o'clock in the morning, or you might have NOV-FEB. It is 
 
-             very important to note that overuse of overflowing ranges creates ranges 
 
-             that don't make sense and no effort has been made to determine which 
 
-             interpretation CronExpression chooses. An example would be 
 
-             "0 0 14-6 ? * FRI-MON". </li>
 
-             </ul>
 
-             </para>
 
-             </remarks>
 
-             <author>Sharada Jambula</author>
 
-             <author>James House</author>
 
-             <author>Contributions from Mads Henderson</author>
 
-             <author>Refactoring from CronTrigger to CronExpression by Aaron Craven</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.Second">
 
-             <summary>
 
-             Field specification for second.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.Minute">
 
-             <summary>
 
-             Field specification for minute.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.Hour">
 
-             <summary>
 
-             Field specification for hour.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.DayOfMonth">
 
-             <summary>
 
-             Field specification for day of month.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.Month">
 
-             <summary>
 
-             Field specification for month.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.DayOfWeek">
 
-             <summary>
 
-             Field specification for day of week.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.Year">
 
-             <summary>
 
-             Field specification for year.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.AllSpecInt">
 
-             <summary>
 
-             Field specification for all wildcard value '*'.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.NoSpecInt">
 
-             <summary>
 
-             Field specification for not specified value '?'.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.AllSpec">
 
-             <summary>
 
-             Field specification for wildcard '*'.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.NoSpec">
 
-             <summary>
 
-             Field specification for no specification at all '?'.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.seconds">
 
-             <summary>
 
-             Seconds.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.minutes">
 
-             <summary>
 
-             minutes.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.hours">
 
-             <summary>
 
-             Hours.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.daysOfMonth">
 
-             <summary>
 
-             Days of month.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.months">
 
-             <summary>
 
-             Months.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.daysOfWeek">
 
-             <summary>
 
-             Days of week.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.years">
 
-             <summary>
 
-             Years.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.lastdayOfWeek">
 
-             <summary>
 
-             Last day of week.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.nthdayOfWeek">
 
-             <summary>
 
-             Nth day of week.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.lastdayOfMonth">
 
-             <summary>
 
-             Last day of month.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.nearestWeekday">
 
-             <summary>
 
-             Nearest weekday.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.calendardayOfWeek">
 
-             <summary>
 
-             Calendar day of week.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.calendardayOfMonth">
 
-             <summary>
 
-             Calendar day of month.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.CronExpression.expressionParsed">
 
-             <summary>
 
-             Expression parsed.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.#ctor(System.String)">
 
-             <summary>
 
-              Constructs a new <see cref="P:Quartz.CronExpression.CronExpressionString"/> based on the specified 
 
-              parameter.
 
-              </summary>
 
-              <param name="cronExpression">
 
-              String representation of the cron expression the new object should represent
 
-              </param>
 
-              <see cref="P:Quartz.CronExpression.CronExpressionString"/>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.IsSatisfiedBy(System.DateTimeOffset)">
 
-             <summary>
 
-             Indicates whether the given date satisfies the cron expression. 
 
-             </summary>
 
-             <remarks>
 
-             Note that  milliseconds are ignored, so two Dates falling on different milliseconds
 
-             of the same second will always have the same result here.
 
-             </remarks>
 
-             <param name="dateUtc">The date to evaluate.</param>
 
-             <returns>a boolean indicating whether the given date satisfies the cron expression</returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetNextValidTimeAfter(System.DateTimeOffset)">
 
-             <summary>
 
-             Returns the next date/time <i>after</i> the given date/time which
 
-             satisfies the cron expression.
 
-             </summary>
 
-             <param name="date">the date/time at which to begin the search for the next valid date/time</param>
 
-             <returns>the next valid date/time</returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetNextInvalidTimeAfter(System.DateTimeOffset)">
 
-             <summary>
 
-             Returns the next date/time <i>after</i> the given date/time which does
 
-             <i>not</i> satisfy the expression.
 
-             </summary>
 
-             <param name="date">the date/time at which to begin the search for the next invalid date/time</param>
 
-             <returns>the next valid date/time</returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.ToString">
 
-             <summary>
 
-             Returns the string representation of the <see cref="T:Quartz.CronExpression"/>
 
-             </summary>
 
-             <returns>The string representation of the <see cref="T:Quartz.CronExpression"/></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.IsValidExpression(System.String)">
 
-             <summary>
 
-             Indicates whether the specified cron expression can be parsed into a 
 
-             valid cron expression
 
-             </summary>
 
-             <param name="cronExpression">the expression to evaluate</param>
 
-             <returns>a boolean indicating whether the given expression is a valid cron
 
-                     expression</returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.BuildExpression(System.String)">
 
-             <summary>
 
-             Builds the expression.
 
-             </summary>
 
-             <param name="expression">The expression.</param>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.StoreExpressionVals(System.Int32,System.String,System.Int32)">
 
-             <summary>
 
-             Stores the expression values.
 
-             </summary>
 
-             <param name="pos">The position.</param>
 
-             <param name="s">The string to traverse.</param>
 
-             <param name="type">The type of value.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.CheckNext(System.Int32,System.String,System.Int32,System.Int32)">
 
-             <summary>
 
-             Checks the next value.
 
-             </summary>
 
-             <param name="pos">The position.</param>
 
-             <param name="s">The string to check.</param>
 
-             <param name="val">The value.</param>
 
-             <param name="type">The type to search.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetExpressionSummary">
 
-             <summary>
 
-             Gets the expression summary.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetExpressionSetSummary(Quartz.Collection.ISet{System.Int32})">
 
-             <summary>
 
-             Gets the expression set summary.
 
-             </summary>
 
-             <param name="data">The data.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.SkipWhiteSpace(System.Int32,System.String)">
 
-             <summary>
 
-             Skips the white space.
 
-             </summary>
 
-             <param name="i">The i.</param>
 
-             <param name="s">The s.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.FindNextWhiteSpace(System.Int32,System.String)">
 
-             <summary>
 
-             Finds the next white space.
 
-             </summary>
 
-             <param name="i">The i.</param>
 
-             <param name="s">The s.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.AddToSet(System.Int32,System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Adds to set.
 
-             </summary>
 
-             <param name="val">The val.</param>
 
-             <param name="end">The end.</param>
 
-             <param name="incr">The incr.</param>
 
-             <param name="type">The type.</param>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetSet(System.Int32)">
 
-             <summary>
 
-             Gets the set of given type.
 
-             </summary>
 
-             <param name="type">The type of set to get.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetValue(System.Int32,System.String,System.Int32)">
 
-             <summary>
 
-             Gets the value.
 
-             </summary>
 
-             <param name="v">The v.</param>
 
-             <param name="s">The s.</param>
 
-             <param name="i">The i.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetNumericValue(System.String,System.Int32)">
 
-             <summary>
 
-             Gets the numeric value from string.
 
-             </summary>
 
-             <param name="s">The string to parse from.</param>
 
-             <param name="i">The i.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetMonthNumber(System.String)">
 
-             <summary>
 
-             Gets the month number.
 
-             </summary>
 
-             <param name="s">The string to map with.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetDayOfWeekNumber(System.String)">
 
-             <summary>
 
-             Gets the day of week number.
 
-             </summary>
 
-             <param name="s">The s.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetTime(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Gets the time from given time parts.
 
-             </summary>
 
-             <param name="sc">The seconds.</param>
 
-             <param name="mn">The minutes.</param>
 
-             <param name="hr">The hours.</param>
 
-             <param name="dayofmn">The day of month.</param>
 
-             <param name="mon">The month.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetTimeAfter(System.DateTimeOffset)">
 
-             <summary>
 
-             Gets the next fire time after the given time.
 
-             </summary>
 
-             <param name="afterTimeUtc">The UTC time to start searching from.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.CreateDateTimeWithoutMillis(System.DateTimeOffset)">
 
-             <summary>
 
-             Creates the date time without milliseconds.
 
-             </summary>
 
-             <param name="time">The time.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.SetCalendarHour(System.DateTimeOffset,System.Int32)">
 
-             <summary>
 
-             Advance the calendar to the particular hour paying particular attention
 
-             to daylight saving problems.
 
-             </summary>
 
-             <param name="date">The date.</param>
 
-             <param name="hour">The hour.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetTimeBefore(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Gets the time before.
 
-             </summary>
 
-             <param name="endTime">The end time.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetFinalFireTime">
 
-             <summary>
 
-             NOT YET IMPLEMENTED: Returns the final time that the 
 
-             <see cref="T:Quartz.CronExpression"/> will match.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.IsLeapYear(System.Int32)">
 
-             <summary>
 
-             Determines whether given year is a leap year.
 
-             </summary>
 
-             <param name="year">The year.</param>
 
-             <returns>
 
-             	<c>true</c> if the specified year is a leap year; otherwise, <c>false</c>.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetLastDayOfMonth(System.Int32,System.Int32)">
 
-             <summary>
 
-             Gets the last day of month.
 
-             </summary>
 
-             <param name="monthNum">The month num.</param>
 
-             <param name="year">The year.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.Clone">
 
-             <summary>
 
-             Creates a new object that is a copy of the current instance.
 
-             </summary>
 
-             <returns>
 
-             A new object that is a copy of this instance.
 
-             </returns>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.Equals(Quartz.CronExpression)">
 
-             <summary>
 
-             Determines whether the specified <see cref="T:Quartz.CronExpression"/> is equal to the current <see cref="T:Quartz.CronExpression"/>.
 
-             </summary>
 
-             <returns>
 
-             true if the specified <see cref="T:Quartz.CronExpression"/> is equal to the current <see cref="T:Quartz.CronExpression"/>; otherwise, false.
 
-             </returns>
 
-             <param name="other">The <see cref="T:Quartz.CronExpression"/> to compare with the current <see cref="T:Quartz.CronExpression"/>. </param>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.Equals(System.Object)">
 
-             <summary>
 
-             Determines whether the specified <see cref="T:System.Object"/> is equal to the current <see cref="T:System.Object"/>.
 
-             </summary>
 
-             <returns>
 
-             true if the specified <see cref="T:System.Object"/> is equal to the current <see cref="T:System.Object"/>; otherwise, false.
 
-             </returns>
 
-             <param name="obj">The <see cref="T:System.Object"/> to compare with the current <see cref="T:System.Object"/>. </param>
 
-         </member>
 
-         <member name="M:Quartz.CronExpression.GetHashCode">
 
-             <summary>
 
-             Serves as a hash function for a particular type. 
 
-             </summary>
 
-             <returns>
 
-             A hash code for the current <see cref="T:System.Object"/>.
 
-             </returns>
 
-             <filterpriority>2</filterpriority>
 
-         </member>
 
-         <member name="P:Quartz.CronExpression.TimeZone">
 
-             <summary>
 
-             Sets or gets the time zone for which the <see cref="T:Quartz.CronExpression"/> of this
 
-             <see cref="T:Quartz.ICronTrigger"/> will be resolved.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.CronExpression.CronExpressionString">
 
-             <summary>
 
-             Gets the cron expression string.
 
-             </summary>
 
-             <value>The cron expression string.</value>
 
-         </member>
 
-         <member name="T:Quartz.ValueSet">
 
-             <summary>
 
-             Helper class for cron expression handling.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.ValueSet.theValue">
 
-             <summary>
 
-             The value.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.ValueSet.pos">
 
-             <summary>
 
-             The position.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.CronScheduleBuilder">
 
-             <summary>
 
-             CronScheduleBuilder is a <see cref="T:Quartz.IScheduleBuilder"/> that defines
 
-             <see cref="T:Quartz.CronExpression"/>-based schedules for <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             Quartz provides a builder-style API for constructing scheduling-related
 
-             entities via a Domain-Specific Language (DSL).  The DSL can best be
 
-             utilized through the usage of static imports of the methods on the classes
 
-             <see cref="T:Quartz.TriggerBuilder"/>, <see cref="T:Quartz.JobBuilder"/>,
 
-             <see cref="T:Quartz.DateBuilder"/>, <see cref="T:Quartz.JobKey"/>, <see cref="T:Quartz.TriggerKey"/>
 
-             and the various <see cref="T:Quartz.IScheduleBuilder"/> implementations.
 
-             </para>
 
-             <para>
 
-             Client code can then use the DSL to write code such as this:
 
-             </para>
 
-             <code>
 
-             IJobDetail job = JobBuilder.Create<MyJob>()
 
-               .WithIdentity("myJob")
 
-               .Build();
 
-             ITrigger trigger = newTrigger()
 
-              .WithIdentity(triggerKey("myTrigger", "myTriggerGroup"))
 
-              .WithSimpleSchedule(x => x.WithIntervalInHours(1).RepeatForever())
 
-              .StartAt(DateBuilder.FutureDate(10, IntervalUnit.Minute))
 
-              .Build();
 
-             scheduler.scheduleJob(job, trigger);
 
-             </code>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.CronExpression"/>
 
-             <seealso cref="T:Quartz.ICronTrigger"/>
 
-             <seealso cref="T:Quartz.IScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.SimpleScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.CalendarIntervalScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.TriggerBuilder"/>
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.Build">
 
-             <summary>
 
-             Build the actual Trigger -- NOT intended to be invoked by end users,
 
-             but will rather be invoked by a TriggerBuilder which this
 
-             ScheduleBuilder is given to.
 
-             </summary>
 
-             <seealso cref="M:Quartz.TriggerBuilder.WithSchedule(Quartz.IScheduleBuilder)"/>
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.CronSchedule(System.String)">
 
-             <summary>
 
-             Create a CronScheduleBuilder with the given cron-expression - which
 
-             is presumed to b e valid cron expression (and hence only a RuntimeException
 
-             will be thrown if it is not).
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="cronExpression">the cron expression to base the schedule on.</param>
 
-             <returns>the new CronScheduleBuilder</returns>
 
-             <seealso cref="T:Quartz.CronExpression"/>
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.CronScheduleNoParseException(System.String)">
 
-             <summary>
 
-             Create a CronScheduleBuilder with the given cron-expression string - which
 
-             may not be a valid cron expression (and hence a ParseException will be thrown
 
-             f it is not).
 
-             </summary>
 
-             <param name="presumedValidCronExpression">the cron expression string to base the schedule on</param>
 
-             <returns>the new CronScheduleBuilder</returns>
 
-             <seealso cref="T:Quartz.CronExpression"/> 
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.CronSchedule(Quartz.CronExpression)">
 
-             <summary>
 
-             Create a CronScheduleBuilder with the given cron-expression.
 
-             </summary>
 
-             <param name="cronExpression">the cron expression to base the schedule on.</param>
 
-             <returns>the new CronScheduleBuilder</returns>
 
-             <seealso cref="T:Quartz.CronExpression"/> 
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.DailyAtHourAndMinute(System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a CronScheduleBuilder with a cron-expression that sets the
 
-             schedule to fire every day at the given time (hour and minute).
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="hour">the hour of day to fire</param>
 
-             <param name="minute">the minute of the given hour to fire</param>
 
-             <returns>the new CronScheduleBuilder</returns>
 
-             <seealso cref="T:Quartz.CronExpression"/>
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.AtHourAndMinuteOnGivenDaysOfWeek(System.Int32,System.Int32,System.DayOfWeek[])">
 
-             <summary>
 
-             Create a CronScheduleBuilder with a cron-expression that sets the
 
-             schedule to fire at the given day at the given time (hour and minute) on the given days of the week.
 
-             </summary>
 
-             <param name="hour">the hour of day to fire</param>
 
-             <param name="minute">the minute of the given hour to fire</param>
 
-             <param name="daysOfWeek">the days of the week to fire</param>
 
-             <returns>the new CronScheduleBuilder</returns>
 
-             <seealso cref="T:Quartz.CronExpression"/>
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.WeeklyOnDayAndHourAndMinute(System.DayOfWeek,System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a CronScheduleBuilder with a cron-expression that sets the
 
-             schedule to fire one per week on the given day at the given time
 
-             (hour and minute).
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="dayOfWeek">the day of the week to fire</param>
 
-             <param name="hour">the hour of day to fire</param>
 
-             <param name="minute">the minute of the given hour to fire</param>
 
-             <returns>the new CronScheduleBuilder</returns>
 
-             <seealso cref="T:Quartz.CronExpression"/>
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.MonthlyOnDayAndHourAndMinute(System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a CronScheduleBuilder with a cron-expression that sets the
 
-             schedule to fire one per month on the given day of month at the given
 
-             time (hour and minute).
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="dayOfMonth">the day of the month to fire</param>
 
-             <param name="hour">the hour of day to fire</param>
 
-             <param name="minute">the minute of the given hour to fire</param>
 
-             <returns>the new CronScheduleBuilder</returns>
 
-             <seealso cref="T:Quartz.CronExpression"/>
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.InTimeZone(System.TimeZoneInfo)">
 
-             <summary>
 
-             The <see cref="T:System.TimeZoneInfo"/> in which to base the schedule.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="tz">the time-zone for the schedule.</param>
 
-             <returns>the updated CronScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.CronExpression.TimeZone"/>
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.WithMisfireHandlingInstructionIgnoreMisfires">
 
-             <summary>
 
-             If the Trigger misfires, use the
 
-             <see cref="F:Quartz.MisfireInstruction.IgnoreMisfirePolicy"/> instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated CronScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.IgnoreMisfirePolicy"/>
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.WithMisfireHandlingInstructionDoNothing">
 
-             <summary>
 
-             If the Trigger misfires, use the <see cref="F:Quartz.MisfireInstruction.CronTrigger.DoNothing"/>
 
-             instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated CronScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.CronTrigger.DoNothing"/>
 
-         </member>
 
-         <member name="M:Quartz.CronScheduleBuilder.WithMisfireHandlingInstructionFireAndProceed">
 
-             <summary>
 
-             If the Trigger misfires, use the <see cref="F:Quartz.MisfireInstruction.CronTrigger.FireOnceNow"/>
 
-             instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated CronScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.CronTrigger.FireOnceNow"/>
 
-         </member>
 
-         <member name="T:Quartz.CronScheduleTriggerBuilderExtensions">
 
-             <summary>
 
-             Extension methods that attach <see cref="T:Quartz.CronScheduleBuilder"/> to <see cref="T:Quartz.TriggerBuilder"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.DailyTimeIntervalScheduleBuilder">
 
-             <summary>
 
-             A <see cref="T:Quartz.IScheduleBuilder"/> implementation that build schedule for DailyTimeIntervalTrigger.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             This builder provide an extra convenient method for you to set the trigger's EndTimeOfDay. You may
 
-             use either endingDailyAt() or EndingDailyAfterCount() to set the value. The later will auto calculate
 
-             your EndTimeOfDay by using the interval, IntervalUnit and StartTimeOfDay to perform the calculation.
 
-             </para>
 
-             <para>
 
-             When using EndingDailyAfterCount(), you should note that it is used to calculating EndTimeOfDay. So
 
-             if your startTime on the first day is already pass by a time that would not add up to the count you
 
-             expected, until the next day comes. Remember that DailyTimeIntervalTrigger will use StartTimeOfDay
 
-             and endTimeOfDay as fresh per each day!
 
-             </para>
 
-             <para>
 
-             Quartz provides a builder-style API for constructing scheduling-related
 
-             entities via a Domain-Specific Language (DSL).  The DSL can best be
 
-             utilized through the usage of static imports of the methods on the classes
 
-             <see cref="T:Quartz.TriggerBuilder"/>, <see cref="T:Quartz.JobBuilder"/>,
 
-             <see cref="T:Quartz.DateBuilder"/>, <see cref="T:Quartz.JobKey"/>, <see cref="T:Quartz.TriggerKey"/>
 
-             and the various <see cref="T:Quartz.IScheduleBuilder"/> implementations.
 
-             </para>
 
-             <para>Client code can then use the DSL to write code such as this:</para>
 
-             <code>
 
-                     IJobDetail job = JobBuilder.Create<MyJob>()
 
-                         .WithIdentity("myJob")
 
-                         .Build();
 
-                         
 
-                     ITrigger trigger = TriggerBuilder.Create() 
 
-                         .WithIdentity(triggerKey("myTrigger", "myTriggerGroup"))
 
-                         .WithDailyTimeIntervalSchedule(x => 
 
-                                    x.WithIntervalInMinutes(15)
 
-                                    .StartingDailyAt(TimeOfDay.HourAndMinuteOfDay(8, 0))
 
-                         .Build();
 
-                     
 
-                     scheduler.scheduleJob(job, trigger);
 
-             </code>
 
-             </remarks>
 
-             <author>James House</author>
 
-             <author>Zemian Deng saltnlight5@gmail.com</author>
 
-             <author>Nuno Maia (.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.DailyTimeIntervalScheduleBuilder.AllDaysOfTheWeek">
 
-             <summary>
 
-             A set of all days of the week.
 
-             </summary>
 
-             <remarks>
 
-             The set contains all values between <see cref="F:System.DayOfWeek.Sunday"/> and <see cref="F:System.DayOfWeek.Saturday"/>
 
-             </remarks>
 
-         </member>
 
-         <member name="F:Quartz.DailyTimeIntervalScheduleBuilder.MondayThroughFriday">
 
-             <summary>
 
-             A set of the business days of the week (for locales similar to the USA).
 
-             </summary>
 
-             <remarks>
 
-             The set contains all values between <see cref="F:System.DayOfWeek.Monday"/> and <see cref="F:System.DayOfWeek.Friday"/> 
 
-             </remarks>
 
-         </member>
 
-         <member name="F:Quartz.DailyTimeIntervalScheduleBuilder.SaturdayAndSunday">
 
-             <summary>
 
-             A set of the weekend days of the week (for locales similar to the USA).
 
-             </summary>
 
-             <remarks>
 
-             The set contains <see cref="F:System.DayOfWeek.Saturday"/> and <see cref="F:System.DayOfWeek.Sunday"/>
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.Create">
 
-             <summary>
 
-             Create a DailyTimeIntervalScheduleBuilder
 
-             </summary>
 
-             <returns>The new DailyTimeIntervalScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.Build">
 
-             <summary>
 
-             Build the actual Trigger -- NOT intended to be invoked by end users,
 
-             but will rather be invoked by a TriggerBuilder which this 
 
-             ScheduleBuilder is given to.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.WithInterval(System.Int32,Quartz.IntervalUnit)">
 
-             <summary>
 
-             Specify the time unit and interval for the Trigger to be produced.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="interval">the interval at which the trigger should repeat.</param>
 
-             <param name="unit"> the time unit (IntervalUnit) of the interval.</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatInterval"/>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.WithIntervalInSeconds(System.Int32)">
 
-             <summary>
 
-             Specify an interval in the IntervalUnit.Second that the produced
 
-             Trigger will repeat at.
 
-             </summary>
 
-             <param name="intervalInSeconds">The number of seconds at which the trigger should repeat.</param>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder></returns>
 
-             <see cref="P:Quartz.IDailyTimeIntervalTrigger.RepeatInterval"/>
 
-             <see cref="P:Quartz.IDailyTimeIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.WithIntervalInMinutes(System.Int32)">
 
-             <summary>
 
-             Specify an interval in the IntervalUnit.Minute that the produced
 
-             Trigger will repeat at.
 
-             </summary>
 
-             <param name="intervalInMinutes">The number of minutes at which the trigger should repeat.</param>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder></returns>
 
-             <see cref="P:Quartz.IDailyTimeIntervalTrigger.RepeatInterval"/>
 
-             <see cref="P:Quartz.IDailyTimeIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.WithIntervalInHours(System.Int32)">
 
-             <summary>
 
-             Specify an interval in the IntervalUnit.Hour that the produced
 
-             Trigger will repeat at.
 
-             </summary>
 
-             <param name="intervalInHours">The number of hours at which the trigger should repeat.</param>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder></returns>
 
-             <see cref="P:Quartz.IDailyTimeIntervalTrigger.RepeatInterval"/>
 
-             <see cref="P:Quartz.IDailyTimeIntervalTrigger.RepeatIntervalUnit"/>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.OnDaysOfTheWeek(Quartz.Collection.ISet{System.DayOfWeek})">
 
-             <summary>
 
-             Set the trigger to fire on the given days of the week.
 
-             </summary>
 
-             <param name="onDaysOfWeek">a Set containing the integers representing the days of the week, defined by <see cref="F:System.DayOfWeek.Sunday"/> - <see cref="F:System.DayOfWeek.Saturday"/>. 
 
-             </param>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.OnDaysOfTheWeek(System.DayOfWeek[])">
 
-             <summary>
 
-             Set the trigger to fire on the given days of the week.
 
-             </summary>
 
-             <param name="onDaysOfWeek">a variable length list of week days representing the days of the week</param>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.OnMondayThroughFriday">
 
-             <summary>
 
-             Set the trigger to fire on the days from Monday through Friday.
 
-             </summary>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.OnSaturdayAndSunday">
 
-             <summary>
 
-             Set the trigger to fire on the days Saturday and Sunday.
 
-             </summary>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.OnEveryDay">
 
-             <summary>
 
-             Set the trigger to fire on all days of the week.
 
-             </summary>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.StartingDailyAt(Quartz.TimeOfDay)">
 
-             <summary>
 
-             Set the trigger to begin firing each day at the given time.
 
-             </summary>
 
-             <param name="timeOfDayUtc"></param>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.EndingDailyAt(Quartz.TimeOfDay)">
 
-             <summary>
 
-             Set the startTimeOfDay for this trigger to end firing each day at the given time.
 
-             </summary>
 
-             <param name="timeOfDayUtc"></param>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.EndingDailyAfterCount(System.Int32)">
 
-             <summary>
 
-             Calculate and set the EndTimeOfDay using count, interval and StarTimeOfDay. This means
 
-             that these must be set before this method is call.
 
-             </summary>
 
-             <param name="count"></param>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.WithMisfireHandlingInstructionIgnoreMisfires">
 
-             <summary>
 
-             If the Trigger misfires, use the 
 
-             <see cref="F:Quartz.MisfireInstruction.IgnoreMisfirePolicy"/> instruction.
 
-             </summary>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.IgnoreMisfirePolicy"/>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.WithMisfireHandlingInstructionDoNothing">
 
-             <summary>
 
-             If the Trigger misfires, use the 
 
-             <see cref="F:Quartz.MisfireInstruction.DailyTimeIntervalTrigger.DoNothing"/> instruction.
 
-             </summary>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.DailyTimeIntervalTrigger.DoNothing"/>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.WithMisfireHandlingInstructionFireAndProceed">
 
-             <summary>
 
-             If the Trigger misfires, use the 
 
-             <see cref="F:Quartz.MisfireInstruction.DailyTimeIntervalTrigger.FireOnceNow"/> instruction.
 
-             </summary>
 
-             <returns>the updated DailyTimeIntervalScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.DailyTimeIntervalTrigger.FireOnceNow"/>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.WithRepeatCount(System.Int32)">
 
-             <summary>
 
-             Set number of times for interval to repeat.
 
-             </summary>
 
-             <remarks>
 
-             Note: if you want total count = 1 (at start time) + repeatCount
 
-             </remarks>
 
-             <param name="repeatCount"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DailyTimeIntervalScheduleBuilder.InTimeZone(System.TimeZoneInfo)">
 
-             <summary>
 
-             TimeZone in which to base the schedule.
 
-             </summary>
 
-             <param name="timezone">the time-zone for the schedule</param>
 
-             <returns>the updated CalendarIntervalScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ICalendarIntervalTrigger.TimeZone"/>
 
-         </member>
 
-         <member name="T:Quartz.DailyTimeIntervalTriggerBuilderExtensions">
 
-             <summary>
 
-             Extension methods that attach <see cref="T:Quartz.DailyTimeIntervalScheduleBuilder"/> to <see cref="T:Quartz.TriggerBuilder"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.DateBuilder">
 
-             <summary>
 
-             DateBuilder is used to conveniently create
 
-             <see cref="T:System.DateTimeOffset"/> instances that meet particular criteria.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             Quartz provides a builder-style API for constructing scheduling-related
 
-             entities via a Domain-Specific Language (DSL).  The DSL can best be
 
-             utilized through the usage of static imports of the methods on the classes
 
-             <see cref="T:Quartz.TriggerBuilder"/>, <see cref="T:Quartz.JobBuilder"/>,
 
-             <see cref="T:Quartz.DateBuilder"/>, <see cref="T:Quartz.JobKey"/>, <see cref="T:Quartz.TriggerKey"/>
 
-             and the various <see cref="T:Quartz.IScheduleBuilder"/> implementations.
 
-             </para>
 
-             <para>Client code can then use the DSL to write code such as this:</para>
 
-             <code>
 
-             IJobDetail job = JobBuilder.Create<MyJob>()
 
-                 .WithIdentity("myJob")
 
-                 .Build();
 
-             ITrigger trigger = newTrigger()
 
-                 .WithIdentity(triggerKey("myTrigger", "myTriggerGroup"))
 
-                 .WithSimpleSchedule(x => x
 
-                     .WithIntervalInHours(1)
 
-                     .RepeatForever())
 
-                 .StartAt(DateBuilder.FutureDate(10, IntervalUnit.Minutes))
 
-                 .Build();
 
-             scheduler.scheduleJob(job, trigger);
 
-             </code>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.TriggerBuilder"/>
 
-             <seealso cref="T:Quartz.JobBuilder"/>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.#ctor">
 
-             <summary>
 
-             Create a DateBuilder, with initial settings for the current date 
 
-             and time in the system default timezone.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.#ctor(System.TimeZoneInfo)">
 
-             <summary>
 
-             Create a DateBuilder, with initial settings for the current date and time in the given timezone.
 
-             </summary>
 
-             <param name="tz"></param>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.NewDate">
 
-             <summary>
 
-             Create a DateBuilder, with initial settings for the current date and time in the system default timezone.
 
-             </summary>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.NewDateInTimeZone(System.TimeZoneInfo)">
 
-             <summary>
 
-             Create a DateBuilder, with initial settings for the current date and time in the given timezone.
 
-             </summary>
 
-             <param name="tz">Time zone to use.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.Build">
 
-             <summary>
 
-             Build the <see cref="T:System.DateTimeOffset"/> defined by this builder instance. 
 
-             </summary>
 
-             <returns>New date time based on builder parameters.</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.AtHourOfDay(System.Int32)">
 
-             <summary>
 
-             Set the hour (0-23) for the Date that will be built by this builder.
 
-             </summary>
 
-             <param name="hour"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.AtMinute(System.Int32)">
 
-             <summary>
 
-             Set the minute (0-59) for the Date that will be built by this builder.
 
-             </summary>
 
-             <param name="minute"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.AtSecond(System.Int32)">
 
-             <summary>
 
-             Set the second (0-59) for the Date that will be built by this builder, and truncate the milliseconds to 000.
 
-             </summary>
 
-             <param name="second"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.OnDay(System.Int32)">
 
-             <summary>
 
-             Set the day of month (1-31) for the Date that will be built by this builder.
 
-             </summary>
 
-             <param name="day"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.InMonth(System.Int32)">
 
-             <summary>
 
-             Set the month (1-12) for the Date that will be built by this builder.
 
-             </summary>
 
-             <param name="month"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.InYear(System.Int32)">
 
-             <summary>
 
-             Set the year for the Date that will be built by this builder.
 
-             </summary>
 
-             <param name="year"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.InTimeZone(System.TimeZoneInfo)">
 
-             <summary>
 
-             Set the TimeZoneInfo for the Date that will be built by this builder (if "null", system default will be used)
 
-             </summary>
 
-             <param name="tz"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.TomorrowAt(System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Get a <see cref="T:System.DateTimeOffset"/> object that represents the given time, on
 
-             tomorrow's date.
 
-             </summary>
 
-             <param name="hour"></param>
 
-             <param name="minute"></param>
 
-             <param name="second"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.TodayAt(System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Get a <see cref="T:System.DateTimeOffset"/> object that represents the given time, on
 
-             today's date (equivalent to <see cref="M:Quartz.DateBuilder.DateOf(System.Int32,System.Int32,System.Int32)"/>.
 
-             </summary>
 
-             <param name="hour"></param>
 
-             <param name="minute"></param>
 
-             <param name="second"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.DateOf(System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Get a <see cref="T:System.DateTimeOffset"/> object that represents the given time, on today's date.
 
-             </summary>
 
-             <param name="second">The value (0-59) to give the seconds field of the date</param>
 
-             <param name="minute">The value (0-59) to give the minutes field of the date</param>
 
-             <param name="hour">The value (0-23) to give the hours field of the date</param>
 
-             <returns>the new date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.DateOf(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Get a <see cref="T:System.DateTimeOffset"/> object that represents the given time, on the
 
-             given date.
 
-             </summary>
 
-             <param name="second">The value (0-59) to give the seconds field of the date</param>
 
-             <param name="minute">The value (0-59) to give the minutes field of the date</param>
 
-             <param name="hour">The value (0-23) to give the hours field of the date</param>
 
-             <param name="dayOfMonth">The value (1-31) to give the day of month field of the date</param>
 
-             <param name="month">The value (1-12) to give the month field of the date</param>
 
-             <returns>the new date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.DateOf(System.Int32,System.Int32,System.Int32,System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Get a <see cref="T:System.DateTimeOffset"/> object that represents the given time, on the
 
-             given date.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="second">The value (0-59) to give the seconds field of the date</param>
 
-             <param name="minute">The value (0-59) to give the minutes field of the date</param>
 
-             <param name="hour">The value (0-23) to give the hours field of the date</param>
 
-             <param name="dayOfMonth">The value (1-31) to give the day of month field of the date</param>
 
-             <param name="month">The value (1-12) to give the month field of the date</param>
 
-             <param name="year">The value (1970-2099) to give the year field of the date</param>
 
-             <returns>the new date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.EvenHourDateAfterNow">
 
-             <summary>
 
-             Returns a date that is rounded to the next even hour after the current time.
 
-             </summary>
 
-             <remarks>
 
-             For example a current time of 08:13:54 would result in a date
 
-             with the time of 09:00:00. If the date's time is in the 23rd hour, the
 
-             date's 'day' will be promoted, and the time will be set to 00:00:00.
 
-             </remarks>
 
-             <returns>the new rounded date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.EvenHourDate(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Returns a date that is rounded to the next even hour above the given date.
 
-             </summary>
 
-             <remarks>
 
-             For example an input date with a time of 08:13:54 would result in a date
 
-             with the time of 09:00:00. If the date's time is in the 23rd hour, the
 
-             date's 'day' will be promoted, and the time will be set to 00:00:00.
 
-             </remarks>
 
-             <param name="date">the Date to round, if <see langword="null" /> the current time will
 
-             be used</param>
 
-             <returns>the new rounded date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.EvenHourDateBefore(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Returns a date that is rounded to the previous even hour below the given date.
 
-             </summary>
 
-             <remarks>
 
-             For example an input date with a time of 08:13:54 would result in a date
 
-             with the time of 08:00:00.
 
-             </remarks>
 
-             <param name="date">the Date to round, if <see langword="null" /> the current time will
 
-             be used</param>
 
-             <returns>the new rounded date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.EvenMinuteDateAfterNow">
 
-             <summary>
 
-             <para>
 
-             Returns a date that is rounded to the next even minute after the current time.
 
-             </para>
 
-             </summary>
 
-             <remarks>
 
-             For example a current time of 08:13:54 would result in a date
 
-             with the time of 08:14:00. If the date's time is in the 59th minute,
 
-             then the hour (and possibly the day) will be promoted.
 
-             </remarks>
 
-             <returns>the new rounded date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.EvenMinuteDate(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Returns a date that is rounded to the next even minute above the given date.
 
-             </summary>
 
-             <remarks>
 
-             For example an input date with a time of 08:13:54 would result in a date
 
-             with the time of 08:14:00. If the date's time is in the 59th minute,
 
-             then the hour (and possibly the day) will be promoted.
 
-             </remarks>
 
-             <param name="date">The Date to round, if <see langword="null" /> the current time will  be used</param>
 
-             <returns>The new rounded date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.EvenMinuteDateBefore(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Returns a date that is rounded to the previous even minute below the given date.
 
-             </summary>
 
-             <remarks>
 
-             For example an input date with a time of 08:13:54 would result in a date
 
-             with the time of 08:13:00.
 
-             </remarks>
 
-             <param name="date">the Date to round, if <see langword="null" /> the current time will
 
-             be used</param>
 
-             <returns>the new rounded date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.EvenSecondDateAfterNow">
 
-             <summary>
 
-             Returns a date that is rounded to the next even second after the current time.
 
-             </summary>
 
-             <returns>the new rounded date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.EvenSecondDate(System.DateTimeOffset)">
 
-             <summary>
 
-             Returns a date that is rounded to the next even second above the given date.
 
-             </summary>
 
-             <param name="date"></param>
 
-             the Date to round, if <see langword="null" /> the current time will
 
-             be used
 
-             <returns>the new rounded date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.EvenSecondDateBefore(System.DateTimeOffset)">
 
-             <summary>
 
-             Returns a date that is rounded to the previous even second below the
 
-             given date.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             For example an input date with a time of 08:13:54.341 would result in a
 
-             date with the time of 08:13:00.000.
 
-             </para>
 
-             </remarks>
 
-             <param name="date"></param>
 
-             the Date to round, if <see langword="null" /> the current time will
 
-             be used
 
-             <returns>the new rounded date</returns>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.NextGivenMinuteDate(System.Nullable{System.DateTimeOffset},System.Int32)">
 
-             <summary>
 
-             Returns a date that is rounded to the next even multiple of the given
 
-             minute.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             For example an input date with a time of 08:13:54, and an input
 
-             minute-base of 5 would result in a date with the time of 08:15:00. The
 
-             same input date with an input minute-base of 10 would result in a date
 
-             with the time of 08:20:00. But a date with the time 08:53:31 and an
 
-             input minute-base of 45 would result in 09:00:00, because the even-hour
 
-             is the next 'base' for 45-minute intervals.
 
-             </para>
 
-             <para>
 
-             More examples: <table>
 
-             <tr>
 
-             <th>Input Time</th>
 
-             <th>Minute-Base</th>
 
-             <th>Result Time</th>
 
-             </tr>
 
-             <tr>
 
-             <td>11:16:41</td>
 
-             <td>20</td>
 
-             <td>11:20:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:36:41</td>
 
-             <td>20</td>
 
-             <td>11:40:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:46:41</td>
 
-             <td>20</td>
 
-             <td>12:00:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:26:41</td>
 
-             <td>30</td>
 
-             <td>11:30:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:36:41</td>
 
-             <td>30</td>
 
-             <td>12:00:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:16:41</td>
 
-             <td>17</td>
 
-             <td>11:17:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:17:41</td>
 
-             <td>17</td>
 
-             <td>11:34:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:52:41</td>
 
-             <td>17</td>
 
-             <td>12:00:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:52:41</td>
 
-             <td>5</td>
 
-             <td>11:55:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:57:41</td>
 
-             <td>5</td>
 
-             <td>12:00:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:17:41</td>
 
-             <td>0</td>
 
-             <td>12:00:00</td>
 
-             </tr>
 
-             <tr>
 
-             <td>11:17:41</td>
 
-             <td>1</td>
 
-             <td>11:08:00</td>
 
-             </tr>
 
-             </table>
 
-             </para>
 
-             </remarks>
 
-             <param name="date"></param>
 
-             the Date to round, if <see langword="null"/> the current time will
 
-             be used
 
-             <param name="minuteBase"></param>
 
-             the base-minute to set the time on
 
-             <returns>the new rounded date</returns>
 
-             <seealso cref="M:Quartz.DateBuilder.NextGivenSecondDate(System.Nullable{System.DateTimeOffset},System.Int32)"/>
 
-         </member>
 
-         <member name="M:Quartz.DateBuilder.NextGivenSecondDate(System.Nullable{System.DateTimeOffset},System.Int32)">
 
-             <summary>
 
-             Returns a date that is rounded to the next even multiple of the given
 
-             minute.
 
-             </summary>
 
-             <remarks>
 
-             The rules for calculating the second are the same as those for
 
-             calculating the minute in the method <see cref="M:Quartz.DateBuilder.NextGivenMinuteDate(System.Nullable{System.DateTimeOffset},System.Int32)"/>.
 
-             </remarks>
 
-             <param name="date">the Date to round, if <see langword="null"/> the current time will</param>
 
-             be used
 
-             <param name="secondBase">the base-second to set the time on</param>
 
-             <returns>the new rounded date</returns>
 
-             <seealso cref="M:Quartz.DateBuilder.NextGivenMinuteDate(System.Nullable{System.DateTimeOffset},System.Int32)"/>
 
-         </member>
 
-         <member name="T:Quartz.DisallowConcurrentExecutionAttribute">
 
-             <summary>
 
-             An attribute that marks a <see cref="T:Quartz.IJob"/> class as one that must not have multiple
 
-             instances executed concurrently (where instance is based-upon a <see cref="T:Quartz.IJobDetail"/> 
 
-             definition - or in other words based upon a <see cref="T:Quartz.JobKey"/>. 
 
-             </summary>
 
-             <remarks>
 
-             <para>This can be used in lieu of implementing the StatefulJob marker interface that 
 
-             was used prior to Quartz 2.0</para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.PersistJobDataAfterExecutionAttribute"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.IInterruptableJob">
 
-             <summary>
 
-             The interface to be implemented by <see cref="T:Quartz.IJob"/>s that provide a 
 
-             mechanism for having their execution interrupted.  It is NOT a requirement
 
-             for jobs to implement this interface - in fact, for most people, none of
 
-             their jobs will.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The means of actually interrupting the Job must be implemented within the
 
-             <see cref="T:Quartz.IJob"/> itself (the <see cref="M:Quartz.IInterruptableJob.Interrupt"/> method of this 
 
-             interface is simply a means for the scheduler to inform the <see cref="T:Quartz.IJob"/>
 
-             that a request has been made for it to be interrupted). The mechanism that
 
-             your jobs use to interrupt themselves might vary between implementations.
 
-             However the principle idea in any implementation should be to have the
 
-             body of the job's <see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> periodically check some flag to
 
-             see if an interruption has been requested, and if the flag is set, somehow
 
-             abort the performance of the rest of the job's work.  An example of 
 
-             interrupting a job can be found in the source for the class Example7's DumbInterruptableJob 
 
-             It is legal to use
 
-             some combination of <see cref="M:System.Threading.Monitor.Wait(System.Object)"/> and <see cref="M:System.Threading.Monitor.Pulse(System.Object)"/> 
 
-             synchronization within <see cref="M:System.Threading.Thread.Interrupt"/> and <see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/>
 
-             in order to have the <see cref="M:System.Threading.Thread.Interrupt"/> method block until the
 
-             <see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> signals that it has noticed the set flag.
 
-             </para>
 
-             
 
-             <para>
 
-             If the Job performs some form of blocking I/O or similar functions, you may
 
-             want to consider having the <see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> method store a
 
-             reference to the calling <see cref="T:System.Threading.Thread"/> as a member variable.  Then the
 
-             implementation of this interfaces <see cref="M:System.Threading.Thread.Interrupt"/> method can call 
 
-             <see cref="M:System.Threading.Thread.Interrupt"/> on that Thread.   Before attempting this, make
 
-             sure that you fully understand what <see cref="M:System.Threading.Thread.Interrupt"/> 
 
-             does and doesn't do.  Also make sure that you clear the Job's member 
 
-             reference to the Thread when the Execute(..) method exits (preferably in a
 
-             <see langword="finally"/> block.
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="M:Quartz.IScheduler.Interrupt(Quartz.JobKey)"/>
 
-             <seealso cref="M:Quartz.IScheduler.Interrupt(System.String)"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.IInterruptableJob.Interrupt">
 
-             <summary>
 
-             Called by the <see cref="T:Quartz.IScheduler"/> when a user
 
-             interrupts the <see cref="T:Quartz.IJob"/>.
 
-             </summary>
 
-             <returns> void (nothing) if job interrupt is successful.</returns>
 
-         </member>
 
-         <member name="T:Quartz.IntervalUnit">
 
-             <summary>
 
-             Supported interval units used by <see cref="T:Quartz.ICalendarIntervalTrigger"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.IStatefulJob">
 
-             <summary>
 
-             A marker interface for <see cref="T:Quartz.IJobDetail"/> s that
 
-             wish to have their state maintained between executions.
 
-             </summary>
 
-             <remarks>
 
-             <see cref="T:Quartz.IStatefulJob"/> instances follow slightly different rules from
 
-             regular <see cref="T:Quartz.IJob"/> instances. The key difference is that their
 
-             associated <see cref="T:Quartz.JobDataMap"/> is re-persisted after every
 
-             execution of the job, thus preserving state for the next execution. The
 
-             other difference is that stateful jobs are not allowed to Execute
 
-             concurrently, which means new triggers that occur before the completion of
 
-             the <see cref="M:Quartz.IJob.Execute(Quartz.IJobExecutionContext)"/> method will be delayed.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.DisallowConcurrentExecutionAttribute"/>
 
-             <seealso cref="T:Quartz.PersistJobDataAfterExecutionAttribute"/>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.IJobDetail"/>
 
-             <seealso cref="T:Quartz.JobDataMap"/>
 
-             <seealso cref="T:Quartz.IScheduler"/> 
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.JobBuilder">
 
-             <summary>
 
-             JobBuilder is used to instantiate <see cref="T:Quartz.IJobDetail"/>s.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The builder will always try to keep itself in a valid state, with 
 
-             reasonable defaults set for calling Build() at any point.  For instance
 
-             if you do not invoke <i>WithIdentity(..)</i> a job name will be generated
 
-             for you.
 
-             </para>
 
-             <para>
 
-             Quartz provides a builder-style API for constructing scheduling-related
 
-             entities via a Domain-Specific Language (DSL).  The DSL can best be
 
-             utilized through the usage of static imports of the methods on the classes
 
-             <see cref="T:Quartz.TriggerBuilder"/>, <see cref="T:Quartz.JobBuilder"/>,
 
-             <see cref="T:Quartz.DateBuilder"/>, <see cref="T:Quartz.JobKey"/>, <see cref="T:Quartz.TriggerKey"/>
 
-             and the various <see cref="T:Quartz.IScheduleBuilder"/> implementations.
 
-             </para>
 
-             <para>
 
-             Client code can then use the DSL to write code such as this:
 
-             </para>
 
-             <code>
 
-                     IJobDetail job = JobBuilder.Create<MyJob>()
 
-                         .WithIdentity("myJob")
 
-                         .Build();
 
-                         
 
-                     ITrigger trigger = TriggerBuilder.Create() 
 
-                         .WithIdentity("myTrigger", "myTriggerGroup")
 
-                         .WithSimpleSchedule(x => x.WithIntervalInHours(1).RepeatForever())
 
-                         .StartAt(DateBuilder.FutureDate(10, IntervalUnit.Minute))
 
-                         .Build();
 
-                     
 
-                     scheduler.scheduleJob(job, trigger);
 
-             </code>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.TriggerBuilder"/>
 
-             <seealso cref="T:Quartz.DateBuilder"/>
 
-             <seealso cref="T:Quartz.IJobDetail"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.Create">
 
-             <summary>
 
-             Create a JobBuilder with which to define a <see cref="T:Quartz.IJobDetail"/>.
 
-             </summary>
 
-             <returns>a new JobBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.Create(System.Type)">
 
-             <summary>
 
-             Create a JobBuilder with which to define a <see cref="T:Quartz.IJobDetail"/>,
 
-             and set the class name of the job to be executed.
 
-             </summary>
 
-             <returns>a new JobBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.Create``1">
 
-             <summary>
 
-             Create a JobBuilder with which to define a <see cref="T:Quartz.IJobDetail"/>,
 
-             and set the class name of the job to be executed.
 
-             </summary>
 
-             <returns>a new JobBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.Build">
 
-             <summary>
 
-             Produce the <see cref="T:Quartz.IJobDetail"/> instance defined by this JobBuilder.
 
-             </summary>
 
-             <returns>the defined JobDetail.</returns>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.WithIdentity(System.String)">
 
-             <summary>
 
-             Use a <see cref="T:Quartz.JobKey"/> with the given name and default group to
 
-             identify the JobDetail.
 
-             </summary>
 
-             <remarks>
 
-             <para>If none of the 'withIdentity' methods are set on the JobBuilder,
 
-             then a random, unique JobKey will be generated.</para>
 
-             </remarks>
 
-             <param name="name">the name element for the Job's JobKey</param>
 
-             <returns>the updated JobBuilder</returns>
 
-             <seealso cref="T:Quartz.JobKey"/> 
 
-             <seealso cref="P:Quartz.IJobDetail.Key"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.WithIdentity(System.String,System.String)">
 
-             <summary>
 
-             Use a <see cref="T:Quartz.JobKey"/> with the given name and group to
 
-             identify the JobDetail.
 
-             </summary>
 
-             <remarks>
 
-             <para>If none of the 'withIdentity' methods are set on the JobBuilder,
 
-             then a random, unique JobKey will be generated.</para>
 
-             </remarks>
 
-             <param name="name">the name element for the Job's JobKey</param>
 
-             <param name="group"> the group element for the Job's JobKey</param>
 
-             <returns>the updated JobBuilder</returns>
 
-             <seealso cref="T:Quartz.JobKey"/>
 
-             <seealso cref="P:Quartz.IJobDetail.Key"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.WithIdentity(Quartz.JobKey)">
 
-             <summary>
 
-             Use a <see cref="T:Quartz.JobKey"/> to identify the JobDetail.
 
-             </summary>
 
-             <remarks>
 
-             <para>If none of the 'withIdentity' methods are set on the JobBuilder,
 
-             then a random, unique JobKey will be generated.</para>
 
-             </remarks>
 
-             <param name="key">the Job's JobKey</param>
 
-             <returns>the updated JobBuilder</returns>
 
-             <seealso cref="T:Quartz.JobKey"/>
 
-             <seealso cref="P:Quartz.IJobDetail.Key"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.WithDescription(System.String)">
 
-             <summary>
 
-             Set the given (human-meaningful) description of the Job.
 
-             </summary>
 
-             <param name="description"> the description for the Job</param>
 
-             <returns>the updated JobBuilder</returns>
 
-             <seealso cref="P:Quartz.IJobDetail.Description"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.OfType``1">
 
-             <summary>
 
-             Set the class which will be instantiated and executed when a
 
-             Trigger fires that is associated with this JobDetail.
 
-             </summary>
 
-             <returns>the updated JobBuilder</returns>
 
-             <seealso cref="P:Quartz.IJobDetail.JobType"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.OfType(System.Type)">
 
-             <summary>
 
-             Set the class which will be instantiated and executed when a
 
-             Trigger fires that is associated with this JobDetail.
 
-             </summary>
 
-             <returns>the updated JobBuilder</returns>
 
-             <seealso cref="P:Quartz.IJobDetail.JobType"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.RequestRecovery">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> whether or not the job
 
-             should be re-executed if a 'recovery' or 'fail-over' situation is
 
-             encountered.
 
-             </summary>
 
-             <remarks>
 
-             If not explicitly set, the default value is <see langword="false"/>.
 
-             </remarks>
 
-             <returns>the updated JobBuilder</returns>
 
-             <seealso cref="P:Quartz.IJobDetail.RequestsRecovery"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.RequestRecovery(System.Boolean)">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> whether or not the job
 
-             should be re-executed if a 'recovery' or 'fail-over' situation is
 
-             encountered.
 
-             </summary>
 
-             <remarks>
 
-             If not explicitly set, the default value is <see langword="false"/>.
 
-             </remarks>
 
-             <param name="shouldRecover"></param>
 
-             <returns>the updated JobBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.StoreDurably">
 
-             <summary>
 
-             Whether or not the job should remain stored after it is
 
-             orphaned (no <see cref="T:Quartz.ITrigger"/>s point to it).
 
-             </summary>
 
-             <remarks>
 
-             If not explicitly set, the default value is <see langword="false"/>
 
-             - this method sets the value to <code>true</code>.
 
-             </remarks>
 
-             <returns>the updated JobBuilder</returns>
 
-             <seealso cref="P:Quartz.IJobDetail.Durable"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.StoreDurably(System.Boolean)">
 
-              <summary>
 
-              Whether or not the job should remain stored after it is
 
-              orphaned (no <see cref="T:Quartz.ITrigger"/>s point to it).
 
-              </summary>
 
-              <remarks>
 
-              If not explicitly set, the default value is <see langword="false"/>.
 
-              </remarks>
 
-              <param name="durability">the value to set for the durability property.</param>
 
-             <returns>the updated JobBuilder</returns>
 
-              <seealso cref="P:Quartz.IJobDetail.Durable"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.UsingJobData(System.String,System.String)">
 
-              <summary>
 
-              Add the given key-value pair to the JobDetail's <see cref="T:Quartz.JobDataMap"/>.
 
-              </summary>
 
-             <returns>the updated JobBuilder</returns>
 
-              <seealso cref="P:Quartz.IJobDetail.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.UsingJobData(System.String,System.Int32)">
 
-              <summary>
 
-              Add the given key-value pair to the JobDetail's <see cref="T:Quartz.JobDataMap"/>.
 
-              </summary>
 
-             <returns>the updated JobBuilder</returns>
 
-              <seealso cref="P:Quartz.IJobDetail.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.UsingJobData(System.String,System.Int64)">
 
-              <summary>
 
-              Add the given key-value pair to the JobDetail's <see cref="T:Quartz.JobDataMap"/>.
 
-              </summary>
 
-             <returns>the updated JobBuilder</returns>
 
-              <seealso cref="P:Quartz.IJobDetail.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.UsingJobData(System.String,System.Single)">
 
-              <summary>
 
-              Add the given key-value pair to the JobDetail's <see cref="T:Quartz.JobDataMap"/>.
 
-              </summary>
 
-             <returns>the updated JobBuilder</returns>
 
-              <seealso cref="P:Quartz.IJobDetail.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.UsingJobData(System.String,System.Double)">
 
-              <summary>
 
-              Add the given key-value pair to the JobDetail's <see cref="T:Quartz.JobDataMap"/>.
 
-              </summary>
 
-             <returns>the updated JobBuilder</returns>
 
-              <seealso cref="P:Quartz.IJobDetail.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.UsingJobData(System.String,System.Boolean)">
 
-              <summary>
 
-              Add the given key-value pair to the JobDetail's <see cref="T:Quartz.JobDataMap"/>.
 
-              </summary>
 
-             <returns>the updated JobBuilder</returns>
 
-              <seealso cref="P:Quartz.IJobDetail.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.UsingJobData(Quartz.JobDataMap)">
 
-              <summary>
 
-              Add all the data from the given <see cref="T:Quartz.JobDataMap"/> to the 
 
-              <see cref="T:Quartz.IJobDetail"/>'s <see cref="T:Quartz.JobDataMap"/>.
 
-              </summary>
 
-             <returns>the updated JobBuilder</returns>
 
-              <seealso cref="P:Quartz.IJobDetail.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.JobBuilder.SetJobData(Quartz.JobDataMap)">
 
-             <summary>
 
-             Replace the <see cref="T:Quartz.IJobDetail"/>'s <see cref="T:Quartz.JobDataMap"/> with the
 
-             given <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-             <param name="newJobDataMap"></param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="T:Quartz.JobDataMap">
 
-             <summary>
 
-             Holds state information for <see cref="T:Quartz.IJob"/> instances.
 
-             </summary>
 
-             <remarks>
 
-             <see cref="T:Quartz.JobDataMap"/> instances are stored once when the <see cref="T:Quartz.IJob"/>
 
-             is added to a scheduler. They are also re-persisted after every execution of
 
-             instances that have <see cref="T:Quartz.PersistJobDataAfterExecutionAttribute"/> present.
 
-             <para>
 
-             <see cref="T:Quartz.JobDataMap"/> instances can also be stored with a 
 
-             <see cref="T:Quartz.ITrigger"/>.  This can be useful in the case where you have a Job
 
-             that is stored in the scheduler for regular/repeated use by multiple 
 
-             Triggers, yet with each independent triggering, you want to supply the
 
-             Job with different data inputs.  
 
-             </para>
 
-             <para>
 
-             The <see cref="T:Quartz.IJobExecutionContext"/> passed to a Job at execution time 
 
-             also contains a convenience <see cref="T:Quartz.JobDataMap"/> that is the result
 
-             of merging the contents of the trigger's JobDataMap (if any) over the
 
-             Job's JobDataMap (if any).  
 
-             </para>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.PersistJobDataAfterExecutionAttribute"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-             <seealso cref="T:Quartz.IJobExecutionContext"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.#ctor">
 
-             <summary>
 
-             Create an empty <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.#ctor(System.Collections.Generic.IDictionary{System.String,System.Object})">
 
-             <summary> 
 
-             Create a <see cref="T:Quartz.JobDataMap"/> with the given data.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.#ctor(System.Collections.IDictionary)">
 
-             <summary> 
 
-             Create a <see cref="T:Quartz.JobDataMap"/> with the given data.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.PutAsString(System.String,System.Boolean)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Boolean"/> value as a string version to the
 
-             <see cref="T:Quartz.IJob"/>'s data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.PutAsString(System.String,System.Char)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Char"/> value as a string version to the
 
-             <see cref="T:Quartz.IJob"/>'s data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.PutAsString(System.String,System.Double)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Double"/> value as a string version to the
 
-             <see cref="T:Quartz.IJob"/>'s data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.PutAsString(System.String,System.Single)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Single"/> value as a string version to the
 
-             <see cref="T:Quartz.IJob"/>'s data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.PutAsString(System.String,System.Int32)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Int32"/> value as a string version to the
 
-             <see cref="T:Quartz.IJob"/>'s data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.PutAsString(System.String,System.Int64)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.Int64"/> value as a string version to the
 
-             <see cref="T:Quartz.IJob"/>'s data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.PutAsString(System.String,System.DateTime)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.DateTime"/> value as a string version to the
 
-             <see cref="T:Quartz.IJob"/>'s data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.PutAsString(System.String,System.DateTimeOffset)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.DateTimeOffset"/> value as a string version to the
 
-             <see cref="T:Quartz.IJob"/>'s data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.PutAsString(System.String,System.TimeSpan)">
 
-             <summary>
 
-             Adds the given <see cref="T:System.TimeSpan"/> value as a string version to the
 
-             <see cref="T:Quartz.IJob"/>'s data map.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetIntValueFromString(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Int32"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetIntValue(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Int32"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetBooleanValueFromString(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Boolean"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetBooleanValue(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Boolean"/> value from the 
 
-             <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetCharFromString(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Char"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetDoubleValueFromString(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Double"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetDoubleValue(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Double"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetFloatValueFromString(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Single"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetFloatValue(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Single"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetLongValueFromString(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Int64"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetDateTimeValueFromString(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.DateTime"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetDateTimeOffsetValueFromString(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.DateTimeOffset"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetTimeSpanValueFromString(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.TimeSpan"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetLongValue(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.Int64"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetDateTimeValue(System.String)">
 
-             <summary>
 
-             Gets the date time.
 
-             </summary>
 
-             <param name="key">The key.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetDateTimeOffsetValue(System.String)">
 
-             <summary>
 
-             Gets the date time offset.
 
-             </summary>
 
-             <param name="key">The key.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.JobDataMap.GetTimeSpanValue(System.String)">
 
-             <summary>
 
-             Retrieve the identified <see cref="T:System.TimeSpan"/> value from the <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.JobExecutionException">
 
-             <summary>
 
-             An exception that can be thrown by a <see cref="T:Quartz.IJob"/>
 
-             to indicate to the Quartz <see cref="T:Quartz.IScheduler"/> that an error
 
-             occurred while executing, and whether or not the <see cref="T:Quartz.IJob"/> requests
 
-             to be re-fired immediately (using the same <see cref="T:Quartz.IJobExecutionContext"/>,
 
-             or whether it wants to be unscheduled.
 
-             </summary>
 
-             <remarks>
 
-             Note that if the flag for 'refire immediately' is set, the flags for
 
-             unscheduling the Job are ignored.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="T:Quartz.IJobExecutionContext"/>
 
-             <seealso cref="T:Quartz.SchedulerException"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.JobExecutionException.#ctor">
 
-             <summary>
 
-             Create a JobExecutionException, with the 're-fire immediately' flag set
 
-             to <see langword="false" />.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobExecutionException.#ctor(System.Exception)">
 
-             <summary>
 
-             Create a JobExecutionException, with the given cause.
 
-             </summary>
 
-             <param name="cause">The cause.</param>
 
-         </member>
 
-         <member name="M:Quartz.JobExecutionException.#ctor(System.String)">
 
-             <summary>
 
-             Create a JobExecutionException, with the given message.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobExecutionException.#ctor(System.String,System.Exception)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.JobExecutionException"/> class.
 
-             </summary>
 
-             <param name="msg">The message.</param>
 
-             <param name="cause">The original cause.</param>
 
-         </member>
 
-         <member name="M:Quartz.JobExecutionException.#ctor(System.Boolean)">
 
-             <summary>
 
-             Create a JobExecutionException with the 're-fire immediately' flag set
 
-             to the given value.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobExecutionException.#ctor(System.Exception,System.Boolean)">
 
-             <summary>
 
-             Create a JobExecutionException with the given underlying exception, and
 
-             the 're-fire immediately' flag set to the given value.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobExecutionException.#ctor(System.String,System.Exception,System.Boolean)">
 
-             <summary>
 
-             Create a JobExecutionException with the given message, and underlying
 
-             exception, and the 're-fire immediately' flag set to the given value.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.JobExecutionException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.JobExecutionException"/> class.
 
-             </summary>
 
-             <param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"></see> that holds the serialized object data about the exception being thrown.</param>
 
-             <param name="context">The <see cref="T:System.Runtime.Serialization.StreamingContext"></see> that contains contextual information about the source or destination.</param>
 
-             <exception cref="T:System.Runtime.Serialization.SerializationException">The class name is null or <see cref="P:System.Exception.HResult"></see> is zero (0). </exception>
 
-             <exception cref="T:System.ArgumentNullException">The info parameter is null. </exception>
 
-         </member>
 
-         <member name="M:Quartz.JobExecutionException.ToString">
 
-             <summary>
 
-             Creates and returns a string representation of the current exception.
 
-             </summary>
 
-             <returns>
 
-             A string representation of the current exception.
 
-             </returns>
 
-             <PermissionSet><IPermission class="System.Security.Permissions.FileIOPermission, mscorlib, Version=2.0.3600.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" PathDiscovery="*AllFiles*"/></PermissionSet>
 
-         </member>
 
-         <member name="P:Quartz.JobExecutionException.UnscheduleFiringTrigger">
 
-             <summary>
 
-             Gets or sets a value indicating whether to unschedule firing trigger.
 
-             </summary>
 
-             <value>
 
-             	<c>true</c> if firing trigger should be unscheduled; otherwise, <c>false</c>.
 
-             </value>
 
-         </member>
 
-         <member name="P:Quartz.JobExecutionException.UnscheduleAllTriggers">
 
-             <summary>
 
-             Gets or sets a value indicating whether to unschedule all triggers.
 
-             </summary>
 
-             <value>
 
-             	<c>true</c> if all triggers should be unscheduled; otherwise, <c>false</c>.
 
-             </value>
 
-         </member>
 
-         <member name="P:Quartz.JobExecutionException.RefireImmediately">
 
-             <summary>
 
-             Gets or sets a value indicating whether to refire immediately.
 
-             </summary>
 
-             <value><c>true</c> if to refire immediately; otherwise, <c>false</c>.</value>
 
-         </member>
 
-         <member name="T:Quartz.JobKey">
 
-             <summary>
 
-             Uniquely identifies a <see cref="T:Quartz.IJobDetail"/>.
 
-             </summary>
 
-             <remarks>
 
-             <para>Keys are composed of both a name and group, and the name must be unique
 
-             within the group.  If only a group is specified then the default group
 
-             name will be used.</para> 
 
-             
 
-             <para>Quartz provides a builder-style API for constructing scheduling-related
 
-             entities via a Domain-Specific Language (DSL).  The DSL can best be
 
-             utilized through the usage of static imports of the methods on the classes
 
-             <see cref="T:Quartz.TriggerBuilder"/>, <see cref="T:Quartz.JobBuilder"/>, 
 
-             <see cref="T:Quartz.DateBuilder"/>, <see cref="T:Quartz.JobKey"/>, <see cref="T:Quartz.TriggerKey"/> 
 
-             and the various <see cref="T:Quartz.IScheduleBuilder"/> implementations.</para>
 
-             
 
-             <para>Client code can then use the DSL to write code such as this:</para>
 
-             <code>
 
-             IJobDetail job = JobBuilder.Create<MyJob>()
 
-                 .WithIdentity("myJob")
 
-                 .Build();
 
-             ITrigger trigger = TriggerBuilder.Create()
 
-                 .WithIdentity("myTrigger", "myTriggerGroup")
 
-                 .WithSimpleSchedule(x => x
 
-                     .WithIntervalInHours(1)
 
-                     .RepeatForever())
 
-                 .StartAt(DateBuilder.FutureDate(10, IntervalUnit.Minute))
 
-                 .Build();
 
-             scheduler.scheduleJob(job, trigger);
 
-             </code>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.IJob"/>
 
-             <seealso cref="F:Quartz.Util.Key`1.DefaultGroup"/>
 
-         </member>
 
-         <member name="T:Quartz.MisfireInstruction">
 
-             <summary>
 
-              Misfire instructions.
 
-             </summary>
 
-              <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.InstructionNotSet">
 
-             <summary>
 
-             Instruction not set (yet).
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.SmartPolicy">
 
-             <summary>
 
-             Use smart policy.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.IgnoreMisfirePolicy">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that the
 
-             <see cref="T:Quartz.ITrigger"/> will never be evaluated for a misfire situation,
 
-             and that the scheduler will simply try to fire it as soon as it can,
 
-             and then update the Trigger as if it had fired at the proper time.
 
-             </summary>
 
-             <remarks>
 
-             NOTE: if a trigger uses this instruction, and it has missed 
 
-             several of its scheduled firings, then several rapid firings may occur 
 
-             as the trigger attempt to catch back up to where it would have been. 
 
-             For example, a SimpleTrigger that fires every 15 seconds which has 
 
-             misfired for 5 minutes will fire 20 times once it gets the chance to 
 
-             fire.
 
-             </remarks>
 
-         </member>
 
-         <member name="T:Quartz.MisfireInstruction.SimpleTrigger">
 
-             <summary>
 
-             Misfire policy settings for SimpleTrigger.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.SimpleTrigger.FireNow">
 
-             <summary> 
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.ISimpleTrigger"/> wants to be fired
 
-             now by <see cref="T:Quartz.IScheduler"/>.
 
-             <para>
 
-             <i>NOTE:</i> This instruction should typically only be used for
 
-             'one-shot' (non-repeating) Triggers. If it is used on a trigger with a
 
-             repeat count > 0 then it is equivalent to the instruction 
 
-             <see cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNowWithRemainingRepeatCount"/>.
 
-             </para>
 
-             </summary>		
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNowWithExistingRepeatCount">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.ISimpleTrigger"/> wants to be
 
-             re-scheduled to 'now' (even if the associated <see cref="T:Quartz.ICalendar"/>
 
-             excludes 'now') with the repeat count left as-is.   This does obey the
 
-             <see cref="T:Quartz.ITrigger"/> end-time however, so if 'now' is after the
 
-             end-time the <see cref="T:Quartz.ITrigger"/> will not fire again.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             <i>NOTE:</i> Use of this instruction causes the trigger to 'forget'
 
-             the start-time and repeat-count that it was originally setup with (this
 
-             is only an issue if you for some reason wanted to be able to tell what
 
-             the original values were at some later time).
 
-             </para>
 
-             </remarks>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNowWithRemainingRepeatCount">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.ISimpleTrigger"/> wants to be
 
-             re-scheduled to 'now' (even if the associated <see cref="T:Quartz.ICalendar"/>
 
-             excludes 'now') with the repeat count set to what it would be, if it had
 
-             not missed any firings. This does obey the <see cref="T:Quartz.ITrigger"/> end-time 
 
-             however, so if 'now' is after the end-time the <see cref="T:Quartz.ITrigger"/> will 
 
-             not fire again.
 
-             
 
-             <para>
 
-             <i>NOTE:</i> Use of this instruction causes the trigger to 'forget'
 
-             the start-time and repeat-count that it was originally setup with.
 
-             Instead, the repeat count on the trigger will be changed to whatever
 
-             the remaining repeat count is (this is only an issue if you for some
 
-             reason wanted to be able to tell what the original values were at some
 
-             later time).
 
-             </para>
 
-             
 
-             <para>
 
-             <i>NOTE:</i> This instruction could cause the <see cref="T:Quartz.ITrigger"/>
 
-             to go to the 'COMPLETE' state after firing 'now', if all the
 
-             repeat-fire-times where missed.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNextWithRemainingCount">
 
-             <summary> 
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.ISimpleTrigger"/> wants to be
 
-             re-scheduled to the next scheduled time after 'now' - taking into
 
-             account any associated <see cref="T:Quartz.ICalendar"/>, and with the
 
-             repeat count set to what it would be, if it had not missed any firings.
 
-             </summary>
 
-             <remarks>
 
-             <i>NOTE/WARNING:</i> This instruction could cause the <see cref="T:Quartz.ITrigger"/>
 
-             to go directly to the 'COMPLETE' state if all fire-times where missed.
 
-             </remarks>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNextWithExistingCount">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.ISimpleTrigger"/> wants to be
 
-             re-scheduled to the next scheduled time after 'now' - taking into
 
-             account any associated <see cref="T:Quartz.ICalendar"/>, and with the
 
-             repeat count left unchanged.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             <i>NOTE/WARNING:</i> This instruction could cause the <see cref="T:Quartz.ITrigger"/>
 
-             to go directly to the 'COMPLETE' state if all the end-time of the trigger 
 
-             has arrived.
 
-             </para>
 
-             </remarks>
 
-         </member>
 
-         <member name="T:Quartz.MisfireInstruction.CronTrigger">
 
-             <summary>
 
-             misfire instructions for CronTrigger
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.CronTrigger.FireOnceNow">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.ICronTrigger"/> wants to be fired now
 
-             by <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.CronTrigger.DoNothing">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.ICronTrigger"/> wants to have it's
 
-             next-fire-time updated to the next time in the schedule after the
 
-             current time (taking into account any associated <see cref="T:Quartz.ICalendar"/>,
 
-             but it does not want to be fired now.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.MisfireInstruction.CalendarIntervalTrigger">
 
-             <summary>
 
-             Misfire instructions for DateIntervalTrigger
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.CalendarIntervalTrigger.FireOnceNow">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.ICalendarIntervalTrigger"/> wants to be 
 
-             fired now by <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.CalendarIntervalTrigger.DoNothing">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.ICalendarIntervalTrigger"/> wants to have it's
 
-             next-fire-time updated to the next time in the schedule after the
 
-             current time (taking into account any associated <see cref="T:Quartz.ICalendar"/>,
 
-             but it does not want to be fired now.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.MisfireInstruction.DailyTimeIntervalTrigger">
 
-             <summary>
 
-             Misfire instructions for DailyTimeIntervalTrigger
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.DailyTimeIntervalTrigger.FireOnceNow">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.IDailyTimeIntervalTrigger"/> wants to be
 
-             fired now by <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.MisfireInstruction.DailyTimeIntervalTrigger.DoNothing">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that upon a mis-fire
 
-             situation, the <see cref="T:Quartz.MisfireInstruction.DailyTimeIntervalTrigger"/> wants to have it's
 
-             next-fire-time updated to the next time in the schedule after the
 
-             current time (taking into account any associated <see cref="T:Quartz.ICalendar"/>,
 
-             but it does not want to be fired now.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.ObjectAlreadyExistsException">
 
-             <summary>
 
-             An exception that is thrown to indicate that an attempt to store a new
 
-             object (i.e. <see cref="T:Quartz.IJobDetail"/>,<see cref="T:Quartz.ITrigger"/>
 
-             or <see cref="T:Quartz.ICalendar"/>) in a <see cref="T:Quartz.IScheduler"/>
 
-             failed, because one with the same name and group already exists.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.ObjectAlreadyExistsException.#ctor(System.String)">
 
-             <summary> <para>
 
-             Create a <see cref="T:Quartz.ObjectAlreadyExistsException"/> with the given
 
-             message.
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ObjectAlreadyExistsException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.ObjectAlreadyExistsException"/> class.
 
-             </summary>
 
-             <param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"></see> that holds the serialized object data about the exception being thrown.</param>
 
-             <param name="context">The <see cref="T:System.Runtime.Serialization.StreamingContext"></see> that contains contextual information about the source or destination.</param>
 
-             <exception cref="T:System.Runtime.Serialization.SerializationException">The class name is null or <see cref="P:System.Exception.HResult"></see> is zero (0). </exception>
 
-             <exception cref="T:System.ArgumentNullException">The info parameter is null. </exception>
 
-         </member>
 
-         <member name="M:Quartz.ObjectAlreadyExistsException.#ctor(Quartz.IJobDetail)">
 
-             <summary> <para>
 
-             Create a <see cref="T:Quartz.ObjectAlreadyExistsException"/> and auto-generate a
 
-             message using the name/group from the given <see cref="T:Quartz.IJobDetail"/>.
 
-             </para>
 
-             
 
-             <para>
 
-             The message will read: <br/>"Unable to store Job with name: '__' and
 
-             group: '__', because one already exists with this identification."
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.ObjectAlreadyExistsException.#ctor(Quartz.ITrigger)">
 
-             <summary> <para>
 
-             Create a <see cref="T:Quartz.ObjectAlreadyExistsException"/> and auto-generate a
 
-             message using the name/group from the given <see cref="T:Quartz.ITrigger"/>.
 
-             </para>
 
-             
 
-             <para>
 
-             The message will read: <br/>"Unable to store Trigger with name: '__' and
 
-             group: '__', because one already exists with this identification."
 
-             </para>
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.PersistJobDataAfterExecutionAttribute">
 
-              <summary>
 
-              An attribute that marks a <see cref="T:Quartz.IJob"/> class as one that makes updates to its
 
-              <see cref="T:Quartz.JobDataMap"/> during execution, and wishes the scheduler to re-store the
 
-              <see cref="T:Quartz.JobDataMap"/> when execution completes. 
 
-              </summary>
 
-              <remarks>
 
-              <para>
 
-              Jobs that are marked with this annotation should also seriously consider
 
-              using the <see cref="T:Quartz.DisallowConcurrentExecutionAttribute"/> attribute, to avoid data
 
-              storage race conditions with concurrently executing job instances.
 
-              </para>
 
-              <para>
 
-              This can be used in lieu of implementing the StatefulJob marker interface that 
 
-              was used prior to Quartz 2.0
 
-              </para>
 
-             </remarks>
 
-              <seealso cref="T:Quartz.DisallowConcurrentExecutionAttribute"/>
 
-              <author>James House</author>
 
-              <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="T:Quartz.SchedulerConfigException">
 
-             <summary>
 
-             An exception that is thrown to indicate that there is a misconfiguration of
 
-             the <see cref="T:Quartz.ISchedulerFactory"/>- or one of the components it
 
-             configures.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerConfigException.#ctor(System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.JobPersistenceException"/> with the given message.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerConfigException.#ctor(System.String,System.Exception)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.JobPersistenceException"/> with the given message
 
-             and cause.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerConfigException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.SchedulerConfigException"/> class.
 
-             </summary>
 
-             <param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"></see> that holds the serialized object data about the exception being thrown.</param>
 
-             <param name="context">The <see cref="T:System.Runtime.Serialization.StreamingContext"></see> that contains contextual information about the source or destination.</param>
 
-             <exception cref="T:System.Runtime.Serialization.SerializationException">The class name is null or <see cref="P:System.Exception.HResult"></see> is zero (0). </exception>
 
-             <exception cref="T:System.ArgumentNullException">The info parameter is null. </exception>
 
-         </member>
 
-         <member name="T:Quartz.SchedulerConstants">
 
-             <summary>
 
-             Scheduler constants.
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerConstants.DefaultGroup">
 
-             <summary>
 
-             A (possibly) useful constant that can be used for specifying the group
 
-             that <see cref="T:Quartz.IJob"/> and <see cref="T:Quartz.ITrigger"/> instances belong to.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerConstants.DefaultRecoveryGroup">
 
-             <summary>
 
-             A constant <see cref="T:Quartz.ITrigger"/> group name used internally by the
 
-             scheduler - clients should not use the value of this constant
 
-             ("RECOVERING_JOBS") for the name of a <see cref="T:Quartz.ITrigger"/>'s group.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerConstants.DefaultFailOverGroup">
 
-             <summary>
 
-             A constant <see cref="T:Quartz.ITrigger"/> group name used internally by the
 
-             scheduler - clients should not use the value of this constant
 
-             ("FAILED_OVER_JOBS") for the name of a <see cref="T:Quartz.ITrigger"/>'s group.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerConstants.FailedJobOriginalTriggerName">
 
-             <summary>
 
-              A constant <see cref="T:Quartz.JobDataMap"/> key that can be used to retrieve the
 
-             name of the original <see cref="T:Quartz.ITrigger"/> from a recovery trigger's
 
-             data map in the case of a job recovering after a failed scheduler
 
-             instance.
 
-             </summary>
 
-             <seealso cref="P:Quartz.IJobDetail.RequestsRecovery"/>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerConstants.FailedJobOriginalTriggerGroup">
 
-             <summary>
 
-             A constant <see cref="T:Quartz.JobDataMap"/> key that can be used to retrieve the
 
-             group of the original <see cref="T:Quartz.ITrigger"/> from a recovery trigger's
 
-             data map in the case of a job recovering after a failed scheduler
 
-             instance.
 
-             </summary>
 
-             <seealso cref="P:Quartz.IJobDetail.RequestsRecovery"/>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerConstants.FailedJobOriginalTriggerFiretime">
 
-             <summary>
 
-             A constant <see cref="T:Quartz.JobDataMap"/> key that can be used to retrieve the
 
-             fire time of the original <see cref="T:Quartz.ITrigger"/> from a recovery
 
-             trigger's data map in the case of a job recovering after a failed scheduler
 
-             instance.
 
-             </summary>
 
-             <remarks>
 
-             Note that this is the time the original firing actually occurred,
 
-             which may be different from the scheduled fire time - as a trigger doesn't
 
-             always fire exactly on time.
 
-             </remarks>
 
-             <seealso cref="P:Quartz.IJobDetail.RequestsRecovery"/>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerConstants.FailedJobOriginalTriggerScheduledFiretime">
 
-             <summary>
 
-             A constant <code>JobDataMap</code> key that can be used to retrieve the scheduled
 
-             fire time of the original <code>Trigger</code> from a recovery  trigger's data
 
-             map in the case of a job recovering after a failed scheduler instance.  
 
-             </summary>
 
-             <remarks>
 
-             Note that this is the time the original firing was scheduled for, which may
 
-             be different from the actual firing time - as a trigger doesn't always fire exactly on time.
 
-             </remarks>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerConstants.SchedulingSignalDateTime">
 
-             <summary>
 
-             A special date time to check against when signaling scheduling change when the signaled fire date suggestion is actually irrelevant.
 
-             We only want to signal the change.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.SchedulerContext">
 
-             <summary>
 
-             Holds context/environment data that can be made available to Jobs as they
 
-             are executed. 
 
-             </summary>
 
-             <remarks>
 
-             Future versions of Quartz may make distinctions on how it propagates
 
-             data in <see cref="T:Quartz.SchedulerContext"/> between instances of proxies to a 
 
-             single scheduler instance - i.e. if Quartz is being used via WCF of Remoting.
 
-             </remarks>
 
-             <seealso cref="P:Quartz.IScheduler.Context"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerContext.#ctor">
 
-             <summary>
 
-             Create an empty <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerContext.#ctor(System.Collections.Generic.IDictionary{System.String,System.Object})">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.JobDataMap"/> with the given data.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerContext.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Serialization constructor.
 
-             </summary>
 
-             <param name="info"></param>
 
-             <param name="context"></param>
 
-         </member>
 
-         <member name="T:Quartz.SchedulerInstruction">
 
-             <summary>
 
-             Instructs Scheduler what to do with a trigger and job.
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerInstruction.NoInstruction">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that the <see cref="T:Quartz.ITrigger"/>
 
-             has no further instructions.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerInstruction.ReExecuteJob">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that the <see cref="T:Quartz.ITrigger"/>
 
-             wants the <see cref="T:Quartz.IJobDetail"/> to re-Execute
 
-             immediately. If not in a 'RECOVERING' or 'FAILED_OVER' situation, the
 
-             execution context will be re-used (giving the <see cref="T:Quartz.IJob"/> the
 
-             ability to 'see' anything placed in the context by its last execution).
 
-             </summary>      
 
-         </member>
 
-         <member name="F:Quartz.SchedulerInstruction.SetTriggerComplete">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that the <see cref="T:Quartz.ITrigger"/>
 
-             should be put in the <see cref="F:Quartz.TriggerState.Complete"/> state.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerInstruction.DeleteTrigger">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that the <see cref="T:Quartz.ITrigger"/>
 
-             wants itself deleted.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerInstruction.SetAllJobTriggersComplete">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that all <see cref="T:Quartz.ITrigger"/>
 
-             s referencing the same <see cref="T:Quartz.IJobDetail"/> as
 
-             this one should be put in the <see cref="F:Quartz.TriggerState.Complete"/> state.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerInstruction.SetAllJobTriggersError">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that all <see cref="T:Quartz.ITrigger"/>
 
-             s referencing the same <see cref="T:Quartz.IJobDetail"/> as
 
-             this one should be put in the <see cref="F:Quartz.TriggerState.Error"/> state.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.SchedulerInstruction.SetTriggerError">
 
-             <summary>
 
-             Instructs the <see cref="T:Quartz.IScheduler"/> that the <see cref="T:Quartz.ITrigger"/>
 
-             should be put in the <see cref="F:Quartz.TriggerState.Error"/> state.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.SchedulerMetaData">
 
-             <summary>
 
-             Describes the settings and capabilities of a given <see cref="T:Quartz.IScheduler"/>
 
-             instance.
 
-             </summary>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerMetaData.#ctor(System.String,System.String,System.Type,System.Boolean,System.Boolean,System.Boolean,System.Boolean,System.Nullable{System.DateTimeOffset},System.Int32,System.Type,System.Boolean,System.Boolean,System.Type,System.Int32,System.String)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.SchedulerMetaData"/> class.
 
-             </summary>
 
-             <param name="schedName">Name of the scheduler.</param>
 
-             <param name="schedInst">The scheduler instance.</param>
 
-             <param name="schedType">The scheduler type.</param>
 
-             <param name="isRemote">if set to <c>true</c>, scheduler is a remote scheduler.</param>
 
-             <param name="started">if set to <c>true</c>, scheduler is started.</param>
 
-             <param name="isInStandbyMode">if set to <c>true</c>, scheduler is in standby mode.</param>
 
-             <param name="shutdown">if set to <c>true</c>, scheduler is shutdown.</param>
 
-             <param name="startTime">The start time.</param>
 
-             <param name="numberOfJobsExec">The number of jobs executed.</param>
 
-             <param name="jsType">The job store type.</param>
 
-             <param name="jsPersistent">if set to <c>true</c>, job store is persistent.</param>
 
-             <param name="jsClustered">if set to <c>true</c>, the job store is clustered</param>
 
-             <param name="tpType">The thread pool type.</param>
 
-             <param name="tpSize">Size of the thread pool.</param>
 
-             <param name="version">The version string.</param>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerMetaData.GetSummary">
 
-             <summary>
 
-             Returns a formatted (human readable) string describing all the <see cref="T:Quartz.IScheduler"/>'s
 
-             meta-data values.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The format of the string looks something like this:
 
-             <pre>
 
-             Quartz Scheduler 'SchedulerName' with instanceId 'SchedulerInstanceId' Scheduler class: 'Quartz.Impl.StdScheduler' - running locally. Running since: '11:33am on Jul 19, 2002' Not currently paused. Number of Triggers fired: '123' Using thread pool 'Quartz.Simpl.SimpleThreadPool' - with '8' threads Using job-store 'Quartz.Impl.JobStore' - which supports persistence.
 
-             </pre>
 
-             </para>
 
-             </remarks>
 
-         </member>
 
-         <member name="M:Quartz.SchedulerMetaData.ToString">
 
-             <summary>
 
-             Return a simple string representation of this object.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.SchedulerName">
 
-             <summary>
 
-             Returns the name of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.SchedulerInstanceId">
 
-             <summary>
 
-             Returns the instance Id of the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.SchedulerType">
 
-             <summary>
 
-             Returns the class-name of the <see cref="T:Quartz.IScheduler"/> instance.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.SchedulerRemote">
 
-             <summary>
 
-             Returns whether the <see cref="T:Quartz.IScheduler"/> is being used remotely (via remoting).
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.Started">
 
-             <summary>
 
-             Returns whether the scheduler has been started.
 
-             </summary>
 
-             <remarks>
 
-             Note: <see cref="P:Quartz.SchedulerMetaData.Started"/> may return <see langword="true"/> even if
 
-             <see cref="P:Quartz.SchedulerMetaData.InStandbyMode"/> returns <see langword="true"/>.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.InStandbyMode">
 
-             <summary>
 
-             Reports whether the <see cref="T:Quartz.IScheduler"/> is in standby mode.
 
-             </summary>
 
-             <remarks>
 
-             Note: <see cref="P:Quartz.SchedulerMetaData.Started"/> may return <see langword="true"/> even if
 
-             <see cref="P:Quartz.SchedulerMetaData.InStandbyMode"/> returns <see langword="true"/>.
 
-             </remarks>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.Shutdown">
 
-             <summary>
 
-             Reports whether the <see cref="T:Quartz.IScheduler"/> has been Shutdown.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.JobStoreType">
 
-             <summary>
 
-             Returns the class-name of the <see cref="T:Quartz.Spi.IJobStore"/> instance that is
 
-             being used by the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.ThreadPoolType">
 
-             <summary>
 
-             Returns the type name of the <see cref="T:System.Threading.ThreadPool"/> instance that is
 
-             being used by the <see cref="T:Quartz.IScheduler"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.ThreadPoolSize">
 
-             <summary> 
 
-             Returns the number of threads currently in the <see cref="T:Quartz.IScheduler"/>'s
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.Version">
 
-             <summary>
 
-             Returns the version of Quartz that is running.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.RunningSince">
 
-             <summary> 
 
-             Returns the <see cref="T:System.DateTimeOffset"/> at which the Scheduler started running.
 
-             </summary>
 
-             <returns> null if the scheduler has not been started.
 
-             </returns>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.NumberOfJobsExecuted">
 
-             <summary>
 
-             Returns the number of jobs executed since the <see cref="T:Quartz.IScheduler"/>
 
-             started..
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.JobStoreSupportsPersistence">
 
-             <summary>
 
-             Returns whether or not the <see cref="T:Quartz.IScheduler"/>'s<see cref="T:Quartz.Spi.IJobStore"/>
 
-             instance supports persistence.
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.SchedulerMetaData.JobStoreClustered">
 
-             <summary>
 
-             Returns whether or not the <see cref="T:Quartz.IScheduler"/>'s <see cref="T:Quartz.Spi.IJobStore"/>
 
-             is clustered.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.SimpleScheduleBuilder">
 
-             <summary>
 
-             SimpleScheduleBuilder is a <see cref="T:Quartz.IScheduleBuilder"/>
 
-             that defines strict/literal interval-based schedules for
 
-             <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             Quartz provides a builder-style API for constructing scheduling-related
 
-             entities via a Domain-Specific Language (DSL).  The DSL can best be
 
-             utilized through the usage of static imports of the methods on the classes
 
-             <see cref="T:Quartz.TriggerBuilder"/>, <see cref="T:Quartz.JobBuilder"/>,
 
-             <see cref="T:Quartz.DateBuilder"/>, <see cref="T:Quartz.JobKey"/>, <see cref="T:Quartz.TriggerKey"/>
 
-             and the various <see cref="T:Quartz.IScheduleBuilder"/> implementations.
 
-             </para>
 
-             <para>Client code can then use the DSL to write code such as this:</para>
 
-             <code>
 
-             JobDetail job = JobBuilder.Create<MyJob>()
 
-                 .WithIdentity("myJob")
 
-                 .Build();
 
-             Trigger trigger = TriggerBuilder.Create()
 
-                 .WithIdentity(triggerKey("myTrigger", "myTriggerGroup"))
 
-                 .WithSimpleSchedule(x => x
 
-                     .WithIntervalInHours(1)
 
-                     .RepeatForever())
 
-                 .StartAt(DateBuilder.FutureDate(10, IntervalUnit.Minute))
 
-                 .Build();
 
-             scheduler.scheduleJob(job, trigger);
 
-             </code>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.ISimpleTrigger"/>
 
-             <seealso cref="T:Quartz.CalendarIntervalScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.CronScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.IScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.TriggerBuilder"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.Create">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatMinutelyForever">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat forever with a 1 minute interval.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatMinutelyForever(System.Int32)">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat forever with an interval
 
-             of the given number of minutes.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatSecondlyForever">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat forever with a 1 second interval.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatSecondlyForever(System.Int32)">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat forever with an interval
 
-             of the given number of seconds.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatHourlyForever">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat forever with a 1 hour interval.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatHourlyForever(System.Int32)">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat forever with an interval
 
-             of the given number of hours.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatMinutelyForTotalCount(System.Int32)">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat the given number
 
-             of times - 1  with a 1 minute interval.
 
-             </summary>
 
-             <remarks>
 
-             <para>Note: Total count = 1 (at start time) + repeat count</para>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatMinutelyForTotalCount(System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat the given number
 
-             of times - 1  with an interval of the given number of minutes.
 
-             </summary>
 
-             <remarks>
 
-             <para>Note: Total count = 1 (at start time) + repeat count</para>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatSecondlyForTotalCount(System.Int32)">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat the given number
 
-             of times - 1  with a 1 second interval.
 
-             </summary>
 
-             <remarks>
 
-             <para>Note: Total count = 1 (at start time) + repeat count</para>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatSecondlyForTotalCount(System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat the given number
 
-             of times - 1  with an interval of the given number of seconds.
 
-             </summary>
 
-             <remarks>
 
-             <para>Note: Total count = 1 (at start time) + repeat count</para>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatHourlyForTotalCount(System.Int32)">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat the given number
 
-             of times - 1  with a 1 hour interval.
 
-             </summary>
 
-             <remarks>
 
-             <para>Note: Total count = 1 (at start time) + repeat count</para>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatHourlyForTotalCount(System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a SimpleScheduleBuilder set to repeat the given number
 
-             of times - 1  with an interval of the given number of hours.
 
-             </summary>
 
-             <remarks>
 
-             <para>Note: Total count = 1 (at start time) + repeat count</para>
 
-             </remarks>
 
-             <returns>the new SimpleScheduleBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.Build">
 
-             <summary>
 
-             Build the actual Trigger -- NOT intended to be invoked by end users,
 
-             but will rather be invoked by a TriggerBuilder which this
 
-             ScheduleBuilder is given to.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <seealso cref="M:Quartz.TriggerBuilder.WithSchedule(Quartz.IScheduleBuilder)"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.WithInterval(System.TimeSpan)">
 
-             <summary>
 
-             Specify a repeat interval in milliseconds.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="timeSpan">the time span at which the trigger should repeat.</param>
 
-             <returns>the updated SimpleScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ISimpleTrigger.RepeatInterval"/>
 
-             <seealso cref="M:Quartz.SimpleScheduleBuilder.WithRepeatCount(System.Int32)"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.WithIntervalInSeconds(System.Int32)">
 
-             <summary>
 
-             Specify a repeat interval in seconds.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="seconds">the time span at which the trigger should repeat.</param>
 
-             <returns>the updated SimpleScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ISimpleTrigger.RepeatInterval"/>
 
-             <seealso cref="M:Quartz.SimpleScheduleBuilder.WithRepeatCount(System.Int32)"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.WithRepeatCount(System.Int32)">
 
-             <summary>
 
-             Specify a the number of time the trigger will repeat - total number of
 
-             firings will be this number + 1.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="repeatCount">the number of seconds at which the trigger should repeat.</param>
 
-             <returns>the updated SimpleScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ISimpleTrigger.RepeatCount"/>
 
-             <seealso cref="M:Quartz.SimpleScheduleBuilder.RepeatForever"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.RepeatForever">
 
-             <summary>
 
-             Specify that the trigger will repeat indefinitely.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated SimpleScheduleBuilder</returns>
 
-             <seealso cref="P:Quartz.ISimpleTrigger.RepeatCount"/>
 
-             <seealso cref="F:Quartz.Impl.Triggers.SimpleTriggerImpl.RepeatIndefinitely"/>
 
-             <seealso cref="M:Quartz.SimpleScheduleBuilder.WithInterval(System.TimeSpan)"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.WithMisfireHandlingInstructionIgnoreMisfires">
 
-             <summary>
 
-             If the Trigger misfires, use the
 
-             <see cref="F:Quartz.MisfireInstruction.IgnoreMisfirePolicy"/> instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated CronScheduleBuilder</returns>
 
-              <seealso cref="F:Quartz.MisfireInstruction.IgnoreMisfirePolicy"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.WithMisfireHandlingInstructionFireNow">
 
-             <summary>
 
-             If the Trigger misfires, use the
 
-             <see cref="F:Quartz.MisfireInstruction.SimpleTrigger.FireNow"/> instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated SimpleScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.SimpleTrigger.FireNow"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.WithMisfireHandlingInstructionNextWithExistingCount">
 
-             <summary>
 
-             If the Trigger misfires, use the
 
-             <see cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNextWithExistingCount"/> instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated SimpleScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNextWithExistingCount"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.WithMisfireHandlingInstructionNextWithRemainingCount">
 
-             <summary>
 
-             If the Trigger misfires, use the
 
-             <see cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNextWithRemainingCount"/> instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated SimpleScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNextWithRemainingCount"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.WithMisfireHandlingInstructionNowWithExistingCount">
 
-             <summary>
 
-             If the Trigger misfires, use the
 
-             <see cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNowWithExistingRepeatCount"/> instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated SimpleScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNowWithExistingRepeatCount"/>
 
-         </member>
 
-         <member name="M:Quartz.SimpleScheduleBuilder.WithMisfireHandlingInstructionNowWithRemainingCount">
 
-             <summary>
 
-             If the Trigger misfires, use the
 
-             <see cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNowWithRemainingRepeatCount"/> instruction.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated SimpleScheduleBuilder</returns>
 
-             <seealso cref="F:Quartz.MisfireInstruction.SimpleTrigger.RescheduleNowWithRemainingRepeatCount"/>
 
-         </member>
 
-         <member name="T:Quartz.SimpleScheduleTriggerBuilderExtensions">
 
-             <summary>
 
-             Extension methods that attach <see cref="T:Quartz.SimpleScheduleBuilder"/> to <see cref="T:Quartz.TriggerBuilder"/>.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.SystemTime">
 
-             <summary>
 
-             A time source for Quartz.NET that returns the current time.
 
-             Original idea by Ayende Rahien:
 
-             http://ayende.com/Blog/archive/2008/07/07/Dealing-with-time-in-tests.aspx
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.SystemTime.UtcNow">
 
-             <summary>
 
-             Return current UTC time via <see cref="T:System.Func`1"/>. Allows easier unit testing.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.SystemTime.Now">
 
-             <summary>
 
-             Return current time in current time zone via <see cref="T:System.Func`1"/>. Allows easier unit testing.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.TimeOfDay">
 
-             <summary>
 
-             Represents a time in hour, minute and second of any given day.
 
-             <remarks>
 
-             <para>
 
-             The hour is in 24-hour convention, meaning values are from 0 to 23. 
 
-             </para>
 
-             </remarks>
 
-             </summary>
 
-             <seealso cref="T:Quartz.IDailyTimeIntervalTrigger"/>
 
-             <author>James House</author>
 
-             <author>Zemian Deng saltnlight5@gmail.com</author>
 
-             <author>Nuno Maia (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.TimeOfDay.#ctor(System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a TimeOfDay instance for the given hour, minute and second.
 
-             </summary>
 
-             <param name="hour">The hour of day, between 0 and 23.</param>
 
-             <param name="minute">The minute of the hour, between 0 and 59.</param>
 
-             <param name="second">The second of the minute, between 0 and 59.</param>
 
-         </member>
 
-         <member name="M:Quartz.TimeOfDay.#ctor(System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a TimeOfDay instance for the given hour, minute (at the zero second of the minute).
 
-             </summary>
 
-             <param name="hour">The hour of day, between 0 and 23.</param>
 
-             <param name="minute">The minute of the hour, between 0 and 59.</param>
 
-         </member>
 
-         <member name="M:Quartz.TimeOfDay.HourMinuteAndSecondOfDay(System.Int32,System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a TimeOfDay instance for the given hour, minute and second.
 
-             </summary>
 
-             <param name="hour">The hour of day, between 0 and 23.</param>
 
-             <param name="minute">The minute of the hour, between 0 and 59.</param>
 
-             <param name="second">The second of the minute, between 0 and 59.</param>
 
-             <returns></returns>
 
-         </member>
 
-         <member name="M:Quartz.TimeOfDay.HourAndMinuteOfDay(System.Int32,System.Int32)">
 
-             <summary>
 
-             Create a TimeOfDay instance for the given hour, minute (at the zero second of the minute)..
 
-             </summary>
 
-             <param name="hour">The hour of day, between 0 and 23.</param>
 
-             <param name="minute">The minute of the hour, between 0 and 59.</param>
 
-             <returns>The newly instantiated TimeOfDay</returns>
 
-         </member>
 
-         <member name="M:Quartz.TimeOfDay.Before(Quartz.TimeOfDay)">
 
-             <summary>
 
-             Determine with this time of day is before the given time of day.
 
-             </summary>
 
-             <param name="timeOfDay"></param>
 
-             <returns>True this time of day is before the given time of day.</returns>
 
-         </member>
 
-         <member name="M:Quartz.TimeOfDay.GetTimeOfDayForDate(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Return a date with time of day reset to this object values. The millisecond value will be zero. 
 
-             </summary>
 
-             <param name="dateTime"></param>
 
-         </member>
 
-         <member name="P:Quartz.TimeOfDay.Hour">
 
-             <summary>
 
-             The hour of the day (between 0 and 23). 
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.TimeOfDay.Minute">
 
-             <summary>
 
-             The minute of the hour (between 0 and 59). 
 
-             </summary>
 
-         </member>
 
-         <member name="P:Quartz.TimeOfDay.Second">
 
-             <summary>
 
-             The second of the minute (between 0 and 59). 
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.TimeSpanParseRuleAttribute">
 
-             <summary>
 
-             Attribute to use with public <see cref="T:System.TimeSpan"/> properties that
 
-             can be set with Quartz configuration. Attribute can be used to advice
 
-             parsing to use correct type of time span (milliseconds, seconds, minutes, hours)
 
-             as it may depend on property.
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-             <seealso cref="T:Quartz.TimeSpanParseRuleAttribute"/>
 
-         </member>
 
-         <member name="M:Quartz.TimeSpanParseRuleAttribute.#ctor(Quartz.TimeSpanParseRule)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.TimeSpanParseRuleAttribute"/> class.
 
-             </summary>
 
-             <param name="rule">The rule.</param>
 
-         </member>
 
-         <member name="P:Quartz.TimeSpanParseRuleAttribute.Rule">
 
-             <summary>
 
-             Gets the rule.
 
-             </summary>
 
-             <value>The rule.</value>
 
-         </member>
 
-         <member name="T:Quartz.TimeSpanParseRule">
 
-             <summary>
 
-             Possible parse rules for <see cref="T:System.TimeSpan"/>s.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.TimeSpanParseRule.Milliseconds">
 
-             <summary>
 
-             
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.TimeSpanParseRule.Seconds">
 
-             <summary>
 
-             
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.TimeSpanParseRule.Minutes">
 
-             <summary>
 
-             
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.TimeSpanParseRule.Hours">
 
-             <summary>
 
-             
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.TimeSpanParseRule.Days">
 
-             <summary>
 
-             
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.TriggerBuilder">
 
-             <summary>
 
-             TriggerBuilder is used to instantiate <see cref="T:Quartz.ITrigger"/>s.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             The builder will always try to keep itself in a valid state, with 
 
-             reasonable defaults set for calling build() at any point.  For instance
 
-             if you do not invoke <i>WithSchedule(..)</i> method, a default schedule
 
-             of firing once immediately will be used.  As another example, if you
 
-             do not invoked <i>WithIdentity(..)</i> a trigger name will be generated
 
-             for you.
 
-             </para>
 
-             <para>
 
-             Quartz provides a builder-style API for constructing scheduling-related
 
-             entities via a Domain-Specific Language (DSL).  The DSL can best be
 
-             utilized through the usage of static imports of the methods on the classes
 
-             <see cref="T:Quartz.TriggerBuilder"/>, <see cref="T:Quartz.JobBuilder"/>,
 
-             <see cref="T:Quartz.DateBuilder"/>, <see cref="T:Quartz.JobKey"/>, <see cref="T:Quartz.TriggerKey"/>
 
-             and the various <see cref="T:Quartz.IScheduleBuilder"/> implementations.
 
-             </para>
 
-             <para>
 
-             Client code can then use the DSL to write code such as this:
 
-             </para>
 
-             <code>
 
-             IJobDetail job = JobBuilder.Create<MyJob>()
 
-                 .WithIdentity("myJob")
 
-                 .Build();
 
-             ITrigger trigger = TriggerBuilder.Create()
 
-                 .WithIdentity("myTrigger", "myTriggerGroup")
 
-                 .WithSimpleSchedule(x => x
 
-                     .WithIntervalInHours(1)
 
-                     .RepeatForever())
 
-                 .StartAt(DateBuilder.FutureDate(10, IntervalUnit.Minute))
 
-                 .Build();
 
-             scheduler.scheduleJob(job, trigger);
 
-             </code>
 
-             </remarks>
 
-             <seealso cref="T:Quartz.JobBuilder"/>
 
-             <seealso cref="T:Quartz.IScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.DateBuilder"/>
 
-             <seealso cref="T:Quartz.ITrigger"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.Create">
 
-             <summary>
 
-             Create a new TriggerBuilder with which to define a
 
-             specification for a Trigger.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the new TriggerBuilder</returns>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.Build">
 
-             <summary>
 
-             Produce the <see cref="T:Quartz.ITrigger"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>a Trigger that meets the specifications of the builder.</returns>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.WithIdentity(System.String)">
 
-             <summary>
 
-             Use a <see cref="T:Quartz.TriggerKey"/> with the given name and default group to
 
-             identify the Trigger.
 
-             </summary>
 
-             <remarks>
 
-             <para>If none of the 'withIdentity' methods are set on the TriggerBuilder,
 
-             then a random, unique TriggerKey will be generated.</para>
 
-             </remarks>
 
-             <param name="name">the name element for the Trigger's TriggerKey</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="T:Quartz.TriggerKey"/>
 
-             <seealso cref="P:Quartz.ITrigger.Key"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.WithIdentity(System.String,System.String)">
 
-             <summary>
 
-             Use a TriggerKey with the given name and group to
 
-             identify the Trigger.
 
-             </summary>
 
-             <remarks>
 
-             <para>If none of the 'withIdentity' methods are set on the TriggerBuilder,
 
-             then a random, unique TriggerKey will be generated.</para>
 
-             </remarks>
 
-             <param name="name">the name element for the Trigger's TriggerKey</param>
 
-             <param name="group">the group element for the Trigger's TriggerKey</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="T:Quartz.TriggerKey"/>
 
-             <seealso cref="P:Quartz.ITrigger.Key"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.WithIdentity(Quartz.TriggerKey)">
 
-             <summary>
 
-             Use the given TriggerKey to identify the Trigger.
 
-             </summary>
 
-             <remarks>
 
-             <para>If none of the 'withIdentity' methods are set on the TriggerBuilder,
 
-             then a random, unique TriggerKey will be generated.</para>
 
-             </remarks>
 
-             <param name="key">the TriggerKey for the Trigger to be built</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="T:Quartz.TriggerKey"/>
 
-             <seealso cref="P:Quartz.ITrigger.Key"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.WithDescription(System.String)">
 
-             <summary>
 
-             Set the given (human-meaningful) description of the Trigger.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="description">the description for the Trigger</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.Description"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.WithPriority(System.Int32)">
 
-             <summary>
 
-             Set the Trigger's priority.  When more than one Trigger have the same
 
-             fire time, the scheduler will fire the one with the highest priority
 
-             first.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="priority">the priority for the Trigger</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="F:Quartz.TriggerConstants.DefaultPriority"/>
 
-             <seealso cref="P:Quartz.ITrigger.Priority"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.ModifiedByCalendar(System.String)">
 
-             <summary>
 
-             Set the name of the <see cref="T:Quartz.ICalendar"/> that should be applied to this
 
-             Trigger's schedule.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="calendarName">the name of the Calendar to reference.</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="T:Quartz.ICalendar"/>
 
-             <seealso cref="P:Quartz.ITrigger.CalendarName"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.StartAt(System.DateTimeOffset)">
 
-             <summary>
 
-             Set the time the Trigger should start at - the trigger may or may
 
-             not fire at this time - depending upon the schedule configured for
 
-             the Trigger.  However the Trigger will NOT fire before this time,
 
-             regardless of the Trigger's schedule.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="startTimeUtc">the start time for the Trigger.</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.StartTimeUtc"/>
 
-             <seealso cref="T:Quartz.DateBuilder"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.StartNow">
 
-             <summary>
 
-             Set the time the Trigger should start at to the current moment -
 
-             the trigger may or may not fire at this time - depending upon the
 
-             schedule configured for the Trigger.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.StartTimeUtc"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.EndAt(System.Nullable{System.DateTimeOffset})">
 
-             <summary>
 
-             Set the time at which the Trigger will no longer fire - even if it's
 
-             schedule has remaining repeats.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="endTimeUtc">the end time for the Trigger.  If null, the end time is indefinite.</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.EndTimeUtc"/>
 
-             <seealso cref="T:Quartz.DateBuilder"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.WithSchedule(Quartz.IScheduleBuilder)">
 
-             <summary>
 
-             Set the <see cref="T:Quartz.IScheduleBuilder"/> that will be used to define the
 
-             Trigger's schedule.
 
-             </summary>
 
-             <remarks>
 
-             <para>The particular <see cref="T:Quartz.IScheduleBuilder"/> used will dictate
 
-             the concrete type of Trigger that is produced by the TriggerBuilder.</para>
 
-             </remarks>
 
-             <param name="scheduleBuilder">the SchedulerBuilder to use.</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="T:Quartz.IScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.SimpleScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.CronScheduleBuilder"/>
 
-             <seealso cref="T:Quartz.CalendarIntervalScheduleBuilder"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.ForJob(Quartz.JobKey)">
 
-             <summary>
 
-             Set the identity of the Job which should be fired by the produced
 
-             Trigger.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="jobKey">the identity of the Job to fire.</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobKey"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.ForJob(System.String)">
 
-             <summary>
 
-             Set the identity of the Job which should be fired by the produced
 
-             Trigger - a <see cref="T:Quartz.JobKey"/> will be produced with the given
 
-             name and default group.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="jobName">the name of the job (in default group) to fire.</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobKey"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.ForJob(System.String,System.String)">
 
-             <summary>
 
-             Set the identity of the Job which should be fired by the produced
 
-             Trigger - a <see cref="T:Quartz.JobKey"/> will be produced with the given
 
-             name and group.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="jobName">the name of the job to fire.</param>
 
-             <param name="jobGroup">the group of the job to fire.</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobKey"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.ForJob(Quartz.IJobDetail)">
 
-             <summary>
 
-             Set the identity of the Job which should be fired by the produced
 
-             Trigger, by extracting the JobKey from the given job.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <param name="jobDetail">the Job to fire.</param>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobKey"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.UsingJobData(System.String,System.String)">
 
-             <summary>
 
-             Add the given key-value pair to the Trigger's <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.UsingJobData(System.String,System.Int32)">
 
-             <summary>
 
-             Add the given key-value pair to the Trigger's <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.UsingJobData(System.String,System.Int64)">
 
-             <summary>
 
-             Add the given key-value pair to the Trigger's <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.UsingJobData(System.String,System.Single)">
 
-             <summary>
 
-             Add the given key-value pair to the Trigger's <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.UsingJobData(System.String,System.Double)">
 
-             <summary>
 
-             Add the given key-value pair to the Trigger's <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.UsingJobData(System.String,System.Decimal)">
 
-             <summary>
 
-             Add the given key-value pair to the Trigger's <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.UsingJobData(System.String,System.Boolean)">
 
-             <summary>
 
-             Add the given key-value pair to the Trigger's <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobDataMap"/>
 
-         </member>
 
-         <member name="M:Quartz.TriggerBuilder.UsingJobData(Quartz.JobDataMap)">
 
-             <summary>
 
-             Add the given key-value pair to the Trigger's <see cref="T:Quartz.JobDataMap"/>.
 
-             </summary>
 
-             <remarks>
 
-             </remarks>
 
-             <returns>the updated TriggerBuilder</returns>
 
-             <seealso cref="P:Quartz.ITrigger.JobDataMap"/>
 
-         </member>
 
-         <member name="T:Quartz.TriggerConstants">
 
-             <summary>
 
-             Common constants for triggers.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.TriggerConstants.DefaultPriority">
 
-             <summary>
 
-             The default value for priority.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.TriggerKey">
 
-             <summary>
 
-              Uniquely identifies a <see cref="T:Quartz.ITrigger"/>.
 
-              </summary>
 
-              <remarks>
 
-              <para>Keys are composed of both a name and group, and the name must be unique
 
-              within the group.  If only a name is specified then the default group
 
-              name will be used.
 
-              </para> 
 
-              <para>
 
-              Quartz provides a builder-style API for constructing scheduling-related
 
-              entities via a Domain-Specific Language (DSL).  The DSL can best be
 
-              utilized through the usage of static imports of the methods on the classes
 
-              <see cref="T:Quartz.TriggerBuilder"/>, <see cref="T:Quartz.JobBuilder"/>,
 
-              <see cref="T:Quartz.DateBuilder"/>, <see cref="T:Quartz.JobKey"/>, <see cref="T:Quartz.TriggerKey"/>
 
-              and the various <see cref="T:Quartz.IScheduleBuilder"/> implementations.
 
-              </para>
 
-              <para>
 
-              Client code can then use the DSL to write code such as this:
 
-              </para>
 
-              <code>
 
-              IJobDetail job = JobBuilder.Create<MyJob>()
 
-                  .WithIdentity("myJob")
 
-                  .Build();
 
-              ITrigger trigger = TriggerBuilder.Create()
 
-                  .WithIdentity("myTrigger", "myTriggerGroup")
 
-                  .WithSimpleSchedule(x => x
 
-                      .WithIntervalInHours(1)
 
-                      .RepeatForever())
 
-                  .StartAt(DateBuilder.FutureDate(10, IntervalUnit.Minute))
 
-                  .Build();
 
-              scheduler.scheduleJob(job, trigger);
 
-              </code>
 
-              </remarks>
 
-              <seealso cref="T:Quartz.ITrigger"/>
 
-              <seealso cref="F:Quartz.Util.Key`1.DefaultGroup"/>
 
-         </member>
 
-         <member name="T:Quartz.TriggerState">
 
-             <summary>
 
-             All trigger states known to Scheduler.
 
-             </summary>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="F:Quartz.TriggerState.Normal">
 
-             <summary>
 
-             Indicates that the <see cref="T:Quartz.ITrigger"/> is in the "normal" state.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.TriggerState.Paused">
 
-             <summary>
 
-             Indicates that the <see cref="T:Quartz.ITrigger"/> is in the "paused" state.
 
-             </summary>
 
-         </member>
 
-         <member name="F:Quartz.TriggerState.Complete">
 
-             <summary>
 
-             Indicates that the <see cref="T:Quartz.ITrigger"/> is in the "complete" state.
 
-             </summary>
 
-             <remarks>
 
-             "Complete" indicates that the trigger has not remaining fire-times in
 
-             its schedule.
 
-             </remarks>
 
-         </member>
 
-         <member name="F:Quartz.TriggerState.Error">
 
-             <summary>
 
-             Indicates that the <see cref="T:Quartz.ITrigger"/> is in the "error" state.
 
-             </summary>
 
-             <remarks>
 
-             <para>
 
-             A <see cref="T:Quartz.ITrigger"/> arrives at the error state when the scheduler
 
-             attempts to fire it, but cannot due to an error creating and executing
 
-             its related job. Often this is due to the <see cref="T:Quartz.IJob"/>'s
 
-             class not existing in the classpath.
 
-             </para>
 
-             
 
-             <para>
 
-             When the trigger is in the error state, the scheduler will make no
 
-             attempts to fire it.
 
-             </para>
 
-             </remarks>
 
-         </member>
 
-         <member name="F:Quartz.TriggerState.Blocked">
 
-             <summary>
 
-             Indicates that the <see cref="T:Quartz.ITrigger"/> is in the "blocked" state.
 
-             </summary>
 
-             <remarks>
 
-             A <see cref="T:Quartz.ITrigger"/> arrives at the blocked state when the job that
 
-             it is associated with has a <see cref="T:Quartz.DisallowConcurrentExecutionAttribute"/> and it is 
 
-             currently executing.
 
-             </remarks>
 
-             <seealso cref="T:Quartz.DisallowConcurrentExecutionAttribute"/>
 
-         </member>
 
-         <member name="F:Quartz.TriggerState.None">
 
-             <summary>
 
-             Indicates that the <see cref="T:Quartz.ITrigger"/> does not exist.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.TriggerTimeComparator">
 
-             <summary>
 
-             A Comparator that compares trigger's next fire times, or in other words,
 
-             sorts them according to earliest next fire time.  If the fire times are
 
-             the same, then the triggers are sorted according to priority (highest
 
-             value first), if the priorities are the same, then they are sorted
 
-             by key.
 
-             </summary>
 
-         </member>
 
-         <member name="T:Quartz.TriggerUtils">
 
-             <summary>
 
-             Convenience and utility methods for simplifying the construction and
 
-             configuration of <see cref="T:Quartz.ITrigger"/>s and DateTimeOffsetOffsets.
 
-             </summary>
 
-             <seealso cref="T:Quartz.ICronTrigger"/>
 
-             <seealso cref="T:Quartz.ISimpleTrigger"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.TriggerUtils.ComputeFireTimes(Quartz.Spi.IOperableTrigger,Quartz.ICalendar,System.Int32)">
 
-             <summary>
 
-             Returns a list of Dates that are the next fire times of a
 
-             <see cref="T:Quartz.ITrigger"/>.
 
-             The input trigger will be cloned before any work is done, so you need
 
-             not worry about its state being altered by this method.
 
-             </summary>
 
-             <param name="trigg">The trigger upon which to do the work</param>
 
-             <param name="cal">The calendar to apply to the trigger's schedule</param>
 
-             <param name="numTimes">The number of next fire times to produce</param>
 
-             <returns>List of java.util.Date objects</returns>
 
-         </member>
 
-         <member name="M:Quartz.TriggerUtils.ComputeEndTimeToAllowParticularNumberOfFirings(Quartz.Spi.IOperableTrigger,Quartz.ICalendar,System.Int32)">
 
-             <summary>
 
-             Compute the <see cref="T:System.DateTimeOffset"/> that is 1 second after the Nth firing of 
 
-             the given <see cref="T:Quartz.ITrigger"/>, taking the trigger's associated 
 
-             <see cref="T:Quartz.ICalendar"/> into consideration.
 
-             </summary>
 
-             <remarks>
 
-             The input trigger will be cloned before any work is done, so you need
 
-             not worry about its state being altered by this method.
 
-             </remarks>
 
-             <param name="trigger">The trigger upon which to do the work</param>
 
-             <param name="calendar">The calendar to apply to the trigger's schedule</param>
 
-             <param name="numberOfTimes">The number of next fire times to produce</param>
 
-             <returns>the computed Date, or null if the trigger (as configured) will not fire that many times</returns>
 
-         </member>
 
-         <member name="M:Quartz.TriggerUtils.ComputeFireTimesBetween(Quartz.Spi.IOperableTrigger,Quartz.ICalendar,System.DateTimeOffset,System.DateTimeOffset)">
 
-             <summary>
 
-             Returns a list of Dates that are the next fire times of a  <see cref="T:Quartz.ITrigger"/>
 
-             that fall within the given date range. The input trigger will be cloned
 
-             before any work is done, so you need not worry about its state being
 
-             altered by this method.
 
-             <para>
 
-             NOTE: if this is a trigger that has previously fired within the given
 
-             date range, then firings which have already occurred will not be listed
 
-             in the output List.
 
-             </para>
 
-             </summary>
 
-             <param name="trigg">The trigger upon which to do the work</param>
 
-             <param name="cal">The calendar to apply to the trigger's schedule</param>
 
-             <param name="from">The starting date at which to find fire times</param>
 
-             <param name="to">The ending date at which to stop finding fire times</param>
 
-             <returns>List of java.util.Date objects</returns>
 
-         </member>
 
-         <member name="T:Quartz.UnableToInterruptJobException">
 
-             <summary>
 
-             An exception that is thrown to indicate that a call to 
 
-             <see cref="M:Quartz.IInterruptableJob.Interrupt"/> failed without interrupting the Job.
 
-             </summary>
 
-             <seealso cref="T:Quartz.IInterruptableJob"/>
 
-             <author>James House</author>
 
-             <author>Marko Lahma (.NET)</author>
 
-         </member>
 
-         <member name="M:Quartz.UnableToInterruptJobException.#ctor(System.String)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.UnableToInterruptJobException"/> with the given message.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.UnableToInterruptJobException.#ctor(System.Exception)">
 
-             <summary>
 
-             Create a <see cref="T:Quartz.UnableToInterruptJobException"/> with the given cause.
 
-             </summary>
 
-         </member>
 
-         <member name="M:Quartz.UnableToInterruptJobException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
 
-             <summary>
 
-             Initializes a new instance of the <see cref="T:Quartz.UnableToInterruptJobException"/> class.
 
-             </summary>
 
-             <param name="info">The <see cref="T:System.Runtime.Serialization.SerializationInfo"></see> that holds the serialized object data about the exception being thrown.</param>
 
-             <param name="context">The <see cref="T:System.Runtime.Serialization.StreamingContext"></see> that contains contextual information about the source or destination.</param>
 
-             <exception cref="T:System.Runtime.Serialization.SerializationException">The class name is null or <see cref="P:System.Exception.HResult"></see> is zero (0). </exception>
 
-             <exception cref="T:System.ArgumentNullException">The info parameter is null. </exception>
 
-         </member>
 
-     </members>
 
- </doc>
 
 
  |